| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since the RB-tree is now sorted by deadline, let's first try the
leftmost entity which has the earliest virtual deadline. I've done
some benchmarks to see its effectiveness.
All the benchmarks are done inside a normal cpu cgroup in a clean
environment with cpu turbo disabled, on a dual-CPU Intel Xeon(R)
Platinum 8260 with 2 NUMA nodes each of which has 24C/48T.
hackbench: process/thread + pipe/socket + 1/2/4/8 groups
netperf: TCP/UDP + STREAM/RR + 24/48/72/96/192 threads
tbench: loopback 24/48/72/96/192 threads
schbench: 1/2/4/8 mthreads
direct: cfs_rq has only one entity
parity: RUN_TO_PARITY
fast: O(1) fastpath
slow: heap search
(%) direct parity fast slow
hackbench 92.95 2.02 4.91 0.12
netperf 68.08 6.60 24.18 1.14
tbench 67.55 11.22 20.61 0.62
schbench 69.91 2.65 25.73 1.71
The above results indicate that this fastpath really makes task
selection more efficient.
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231115033647.80785-4-wuyun.abel@bytedance.com
|
|
Sort the task timeline by virtual deadline and keep the min_vruntime
in the augmented tree, so we can avoid doubling the worst case cost
and make full use of the cached leftmost node to enable O(1) fastpath
picking in next patch.
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231115033647.80785-3-wuyun.abel@bytedance.com
|
|
Since commit fc137c0ddab2 ("sched/numa: enhance vma scanning logic")
NUMA Balancing allows updating PTEs to trap NUMA hinting faults if the
task had previously accessed VMA. However unconditional scan of VMAs are
allowed during initial phase of VMA creation until process's
mm numa_scan_seq reaches 2 even though current task had not accessed VMA.
Rationale:
- Without initial scan subsequent PTE update may never happen.
- Give fair opportunity to all the VMAs to be scanned and subsequently
understand the access pattern of all the VMAs.
But it has a corner case where, if a VMA is created after some time,
process's mm numa_scan_seq could be already greater than 2.
For e.g., values of mm numa_scan_seq when VMAs are created by running
mmtest autonuma benchmark briefly looks like:
start_seq=0 : 459
start_seq=2 : 138
start_seq=3 : 144
start_seq=4 : 8
start_seq=8 : 1
start_seq=9 : 1
This results in no unconditional PTE updates for those VMAs created after
some time.
Fix:
- Note down the initial value of mm numa_scan_seq in per VMA start_seq.
- Allow unconditional scan till start_seq + 2.
Result:
SUT: AMD EPYC Milan with 2 NUMA nodes 256 cpus.
base kernel: upstream 6.6-rc6 with Mels patches [1] applied.
kernbench
========== base patched %gain
Amean elsp-128 165.09 ( 0.00%) 164.78 * 0.19%*
Duration User 41404.28 41375.08
Duration System 9862.22 9768.48
Duration Elapsed 519.87 518.72
Ops NUMA PTE updates 1041416.00 831536.00
Ops NUMA hint faults 263296.00 220966.00
Ops NUMA pages migrated 258021.00 212769.00
Ops AutoNUMA cost 1328.67 1114.69
autonumabench
NUMA01_THREADLOCAL
==================
Amean elsp-NUMA01_THREADLOCAL 81.79 (0.00%) 67.74 * 17.18%*
Duration User 54832.73 47379.67
Duration System 75.00 185.75
Duration Elapsed 576.72 476.09
Ops NUMA PTE updates 394429.00 11121044.00
Ops NUMA hint faults 1001.00 8906404.00
Ops NUMA pages migrated 288.00 2998694.00
Ops AutoNUMA cost 7.77 44666.84
Signed-off-by: Raghavendra K T <raghavendra.kt@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/2ea7cbce80ac7c62e90cbfb9653a7972f902439f.1697816692.git.raghavendra.kt@amd.com
|
|
Since RCU-tasks uses READ_ONCE(p->on_rq), ensure the write-side
matches with WRITE_ONCE().
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/e4896e0b-eacc-45a2-a7a8-de2280a51ecc@paulmck-laptop
|
|
should_we_balance is called for the decision to do load-balancing.
When sched ticks invoke this function, only one CPU should return
true. However, in the current code, two CPUs can return true. The
following situation, where b means busy and i means idle, is an
example, because CPU 0 and CPU 2 return true.
[0, 1] [2, 3]
b b i b
This fix checks if there exists an idle CPU with busy sibling(s)
after looking for a CPU on an idle core. If some idle CPUs with busy
siblings are found, just the first one should do load-balancing.
Fixes: b1bfeab9b002 ("sched/fair: Consider the idle state of the whole core for load balance")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20231031133821.1570861-1-keisuke.nishimura@inria.fr
|
|
519fabc7aaba ("psi: remove 500ms min window size limitation for
triggers") breaks unprivileged psi polling on cgroups.
Historically, we had a privilege check for polling in the open() of a
pressure file in /proc, but were erroneously missing it for the open()
of cgroup pressure files.
When unprivileged polling was introduced in d82caa273565 ("sched/psi:
Allow unprivileged polling of N*2s period"), it needed to filter
privileges depending on the exact polling parameters, and as such
moved the CAP_SYS_RESOURCE check from the proc open() callback to
psi_trigger_create(). Both the proc files as well as cgroup files go
through this during write(). This implicitly added the missing check
for privileges required for HT polling for cgroups.
When 519fabc7aaba ("psi: remove 500ms min window size limitation for
triggers") followed right after to remove further restrictions on the
RT polling window, it incorrectly assumed the cgroup privilege check
was still missing and added it to the cgroup open(), mirroring what we
used to do for proc files in the past.
As a result, unprivileged poll requests that would be supported now
get rejected when opening the cgroup pressure file for writing.
Remove the cgroup open() check. psi_trigger_create() handles it.
Fixes: 519fabc7aaba ("psi: remove 500ms min window size limitation for triggers")
Reported-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: stable@vger.kernel.org # 6.5+
Link: https://lore.kernel.org/r/20231026164114.2488682-1-hannes@cmpxchg.org
|
|
vruntime of the (on_rq && !0-lag) entity needs to be adjusted when
it gets re-weighted, and the calculations can be simplified based
on the fact that re-weight won't change the w-average of all the
entities. Please check the proofs in comments.
But adjusting vruntime can also cause position change in RB-tree
hence require re-queue to fix up which might be costly. This might
be avoided by deferring adjustment to the time the entity actually
leaves tree (dequeue/pick), but that will negatively affect task
selection and probably not good enough either.
Fixes: 147f3efaa241 ("sched/fair: Implement an EEVDF-like scheduling policy")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231107090510.71322-2-wuyun.abel@bytedance.com
|
|
|
|
The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))
Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/
Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/
Fixes: b6e3d1ba4fcf ("wifi: iwlwifi: mvm: implement new firmware API for statistics")
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The order of descriptions should be consistent with the argument list of
the function, so "kretprobe" should be the second one.
int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe,
const char *name, const char *loc, ...)
Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/
Fixes: 2a588dd1d5d6 ("tracing: Add kprobe event command generation functions")
Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
When clearing the root PD fails we need to properly release it again.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
mem = bo->tbo.resource may be NULL in amdgpu_vm_bo_update.
Fixes: 180253782038 ("drm/ttm: stop allocating dummy resources during BO creation")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
We need kernel scheduling entities to deal with handle clean up
if apps are not cleaned up properly. With commit 56e449603f0ac5
("drm/sched: Convert the GPU scheduler to variable number of run-queues")
the scheduler entities have to be created after scheduler init, so
change the ordering to fix this.
v2: Leave logic in UVD and VCE code
Fixes: 56e449603f0a ("drm/sched: Convert the GPU scheduler to variable number of run-queues")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: ltuikov89@gmail.com
|
|
The kfd_resume needs to touch GC registers to enable the interrupts,
it needs to be done before GFXOFF is enabled to ensure that the GFX is
not off and GC registers can be touched. So move kfd_resume before the
amdgpu_device_ip_late_init which enables the CGPG/GFXOFF.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If a user has disabled GFXOFF this may cause problems for the suspend
sequence. Ensure that it is enabled in amdgpu_acpi_is_s0ix_active().
The system won't reach the deepest state but it also won't hang.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
From 2.45 to 2.46
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When a server stops supporting multichannel, we will
keep attempting reconnects to the secondary channels today.
Avoid this by freeing extra channels when negotiate
returns no multichannel support.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When the user mounts with multichannel option, but the
server does not support it, there can be a time in future
where it can be supported.
With this change, such a case is handled.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
|
|
The tcon_flags field was always being set to zero in the information
about the mount returned by the ioctl CIFS_IOC_GET_MNT_INFO instead
of being set to the value of the Flags field in the tree connection
structure as intended.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Bail out early with error message when trying to boot a 64-bit kernel on
32-bit machines. This fixes the previous commit to include the check for
true 64-bit kernels as well.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 591d2108f3abc ("parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines")
Cc: <stable@vger.kernel.org> # v6.0+
|
|
A race condition exists where a synchronous (noqueue) transfer can be
active during a system suspend. This can cause a null pointer
dereference exception to occur when the system resumes.
Example order of events leading to the exception:
1. spi_sync() calls __spi_transfer_message_noqueue() which sets
ctlr->cur_msg
2. Spi transfer begins via spi_transfer_one_message()
3. System is suspended interrupting the transfer context
4. System is resumed
6. spi_controller_resume() calls spi_start_queue() which resets cur_msg
to NULL
7. Spi transfer context resumes and spi_finalize_current_message() is
called which dereferences cur_msg (which is now NULL)
Wait for synchronous transfers to complete before suspending by
acquiring the bus mutex and setting/checking a suspend flag.
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Link: https://lore.kernel.org/r/20231107144743.v1.1.I7987f05f61901f567f7661763646cb7d7919b528@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@kernel.org
|
|
Fix to check the tracepoint event is not valid with $retval.
The commit 08c9306fc2e3 ("tracing/fprobe-event: Assume fprobe is
a return event by $retval") introduced automatic return probe
conversion with $retval. But since tracepoint event does not
support return probe, $retval is not acceptable.
Without this fix, ftracetest, tprobe_syntax_errors.tc fails;
[22] Tracepoint probe event parser error log check [FAIL]
----
# tail 22-tprobe_syntax_errors.tc-log.mRKroL
+ ftrace_errlog_check trace_fprobe t kfree ^$retval dynamic_events
+ printf %s t kfree
+ wc -c
+ pos=8
+ printf %s t kfree ^$retval
+ tr -d ^
+ command=t kfree $retval
+ echo Test command: t kfree $retval
Test command: t kfree $retval
+ echo
----
So 't kfree $retval' should fail (tracepoint doesn't support
return probe) but passed it.
Link: https://lore.kernel.org/all/169944555933.45057.12831706585287704173.stgit@devnote2/
Fixes: 08c9306fc2e3 ("tracing/fprobe-event: Assume fprobe is a return event by $retval")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Most architectures that support kprobes declare this function in their
own asm/kprobes.h header and provide an override, but some are missing
the prototype, which causes a warning for the __weak stub implementation:
kernel/kprobes.c:1865:12: error: no previous prototype for 'kprobe_exceptions_notify' [-Werror=missing-prototypes]
1865 | int __weak kprobe_exceptions_notify(struct notifier_block *self,
Move the prototype into linux/kprobes.h so it is visible to all
the definitions.
Link: https://lore.kernel.org/all/20231108125843.3806765-4-arnd@kernel.org/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Kernel test robot reported build warnings that structures g_ot_sync_ops,
g_ot_async_ops and g_testcases should be static. These definitions are
only used in test_objpool.c, so make them static
Link: https://lore.kernel.org/all/20231108012248.313574-1-wuqiang.matt@bytedance.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311071229.WGrWUjM1-lkp@intel.com/
Signed-off-by: wuqiang.matt <wuqiang.matt@bytedance.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Add a note about the argument and return value accecss will be best
effort. Depending on the type, it will be passed via stack or a
pair of the registers, but $argN and $retval only support the
single register access.
Link: https://lore.kernel.org/all/169556269377.146934.14829235476649685954.stgit@devnote2/
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
These enums are passed to set/test_bit(). The set/test_bit() functions
take a bit number instead of a shifted value. Passing a shifted value
is a double shift bug like doing BIT(BIT(1)). The double shift bug
doesn't cause a problem here because we are only checking 0 and 1 but
if the value was 5 or above then it can lead to a buffer overflow.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The PWMF_REQUESTED enum is supposed to be used with test_bit() and not
used as in a bitwise AND. In this specific code the flag will never be
set so the function is effectively a no-op.
Fixes: e3fe982b2e4e ("pwm: samsung: Put per-channel data into driver data")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
wr_reg_wa() is not an appropriate name for a global function, and doesn't need
to be global anyway, so mark it static and avoid the warning:
drivers/video/fbdev/fsl-diu-fb.c:493:6: error: no previous prototype for 'wr_reg_wa' [-Werror=missing-prototypes]
Fixes: 0d9dab39fbbe ("powerpc/5121: fsl-diu-fb: fix issue with re-enabling DIU area descriptor")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent a section mismatch warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When multiple mounts are to the same share from the same client it was not
possible to determine which section of /proc/fs/cifs/Stats (and DebugData)
correspond to that mount. In some recent examples this turned out to be
a significant problem when trying to analyze performance data - since
there are many cases where unless we know the tree id and session id we
can't figure out which stats (e.g. number of SMB3.1.1 requests by type,
the total time they take, which is slowest, how many fail etc.) apply to
which mount. The only existing loosely related ioctl CIFS_IOC_GET_MNT_INFO
does not return the information needed to uniquely identify which tcon
is which mount although it does return various flags and device info.
Add a cifs.ko ioctl CIFS_IOC_GET_TCON_INFO (0x800ccf0c) to return tid,
session id, tree connect count.
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This is only used locally, so mark it static to avoid a warning:
drivers/parport/parport_gsc.c:395:5: error: no previous prototype for 'parport_gsc_init' [-Werror=missing-prototypes]
Acked-by: Helge Deller <deller@gmx.de>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When CONFIG_SYSFB is disabled, the hyperv_fb driver can now run into
undefined behavior on a gen2 VM, as indicated by this smatch warning:
drivers/video/fbdev/hyperv_fb.c:1077 hvfb_getmem() error: uninitialized symbol 'base'.
drivers/video/fbdev/hyperv_fb.c:1077 hvfb_getmem() error: uninitialized symbol 'size'.
Since there is no way to know the actual framebuffer in this configuration,
just return an allocation failure here, which should avoid the build
warning and the undefined behavior.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202311070802.YCpvehaz-lkp@intel.com/
Fixes: a07b50d80ab6 ("hyperv: avoid dependency on screen_info")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/encoder-tpd12s015: section mismatch in reference: tpd_driver+0x4 (section: .data) -> tpd_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410: section mismatch in reference: tfp410_driver+0x4 (section: .data) -> tfp410_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01: section mismatch in reference: sharp_ls_driver+0x4 (section: .data) -> sharp_ls_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410: section mismatch in reference: tfp410_driver+0x4 (section: .data) -> tfp410_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi: section mismatch in reference: hdmi_connector_driver+0x4 (section: .data) -> hdmic_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/connector-dvi: section mismatch in reference: dvi_connector_driver+0x4 (section: .data) -> dvic_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm: section mismatch in reference: dsicm_driver+0x4 (section: .data) -> dsicm_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
Abel Wu
Raghavendra K T
Paul E. McKenney
Keisuke Nishimura
Johannes Weiner
Linus Torvalds
Miri Korenblit
Yujie Liu
Christian König
Felix Kuehling
Alex Deucher
Tim Huang
Mario Limonciello
Steve French
Shyam Prasad N
Helge Deller
Mark Hasemeyer
Masami Hiramatsu (Google)
Arnd Bergmann
wuqiang.matt
Dan Carpenter
Uwe Kleine-König