aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-12-27tipc: fix tipc_mon_delete() oops in tipc_enable_bearer() error pathTommi Rantala1-1/+5
Calling tipc_mon_delete() before the monitor has been created will oops. This can happen in tipc_enable_bearer() error path if tipc_disc_create() fails. [ 48.589074] BUG: unable to handle kernel paging request at 0000000000001008 [ 48.590266] IP: tipc_mon_delete+0xea/0x270 [tipc] [ 48.591223] PGD 1e60c5067 P4D 1e60c5067 PUD 1eb0cf067 PMD 0 [ 48.592230] Oops: 0000 [#1] SMP KASAN [ 48.595610] CPU: 5 PID: 1199 Comm: tipc Tainted: G B 4.15.0-rc4-pc64-dirty #5 [ 48.597176] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 [ 48.598489] RIP: 0010:tipc_mon_delete+0xea/0x270 [tipc] [ 48.599347] RSP: 0018:ffff8801d827f668 EFLAGS: 00010282 [ 48.600705] RAX: ffff8801ee813f00 RBX: 0000000000000204 RCX: 0000000000000000 [ 48.602183] RDX: 1ffffffff1de6a75 RSI: 0000000000000297 RDI: 0000000000000297 [ 48.604373] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff1dd1533 [ 48.605607] R10: ffffffff8eafbb05 R11: fffffbfff1dd1534 R12: 0000000000000050 [ 48.607082] R13: dead000000000200 R14: ffffffff8e73f310 R15: 0000000000001020 [ 48.608228] FS: 00007fc686484800(0000) GS:ffff8801f5540000(0000) knlGS:0000000000000000 [ 48.610189] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.611459] CR2: 0000000000001008 CR3: 00000001dda70002 CR4: 00000000003606e0 [ 48.612759] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 48.613831] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 48.615038] Call Trace: [ 48.615635] tipc_enable_bearer+0x415/0x5e0 [tipc] [ 48.620623] tipc_nl_bearer_enable+0x1ab/0x200 [tipc] [ 48.625118] genl_family_rcv_msg+0x36b/0x570 [ 48.631233] genl_rcv_msg+0x5a/0xa0 [ 48.631867] netlink_rcv_skb+0x1cc/0x220 [ 48.636373] genl_rcv+0x24/0x40 [ 48.637306] netlink_unicast+0x29c/0x350 [ 48.639664] netlink_sendmsg+0x439/0x590 [ 48.642014] SYSC_sendto+0x199/0x250 [ 48.649912] do_syscall_64+0xfd/0x2c0 [ 48.650651] entry_SYSCALL64_slow_path+0x25/0x25 [ 48.651843] RIP: 0033:0x7fc6859848e3 [ 48.652539] RSP: 002b:00007ffd25dff938 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 48.654003] RAX: ffffffffffffffda RBX: 00007ffd25dff990 RCX: 00007fc6859848e3 [ 48.655303] RDX: 0000000000000054 RSI: 00007ffd25dff990 RDI: 0000000000000003 [ 48.656512] RBP: 00007ffd25dff980 R08: 00007fc685c35fc0 R09: 000000000000000c [ 48.657697] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000d13010 [ 48.658840] R13: 00007ffd25e009c0 R14: 0000000000000000 R15: 0000000000000000 [ 48.662972] RIP: tipc_mon_delete+0xea/0x270 [tipc] RSP: ffff8801d827f668 [ 48.664073] CR2: 0000000000001008 [ 48.664576] ---[ end trace e811818d54d5ce88 ]--- Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27tipc: error path leak fixes in tipc_enable_bearer()Tommi Rantala1-1/+4
Fix memory leak in tipc_enable_bearer() if enable_media() fails, and cleanup with bearer_disable() if tipc_mon_create() fails. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27RDS: Check cmsg_len before dereferencing CMSG_DATAAvinash Repaka1-0/+3
RDS currently doesn't check if the length of the control message is large enough to hold the required data, before dereferencing the control message data. This results in following crash: BUG: KASAN: stack-out-of-bounds in rds_rdma_bytes net/rds/send.c:1013 [inline] BUG: KASAN: stack-out-of-bounds in rds_sendmsg+0x1f02/0x1f90 net/rds/send.c:1066 Read of size 8 at addr ffff8801c928fb70 by task syzkaller455006/3157 CPU: 0 PID: 3157 Comm: syzkaller455006 Not tainted 4.15.0-rc3+ #161 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430 rds_rdma_bytes net/rds/send.c:1013 [inline] rds_sendmsg+0x1f02/0x1f90 net/rds/send.c:1066 sock_sendmsg_nosec net/socket.c:628 [inline] sock_sendmsg+0xca/0x110 net/socket.c:638 ___sys_sendmsg+0x320/0x8b0 net/socket.c:2018 __sys_sendmmsg+0x1ee/0x620 net/socket.c:2108 SYSC_sendmmsg net/socket.c:2139 [inline] SyS_sendmmsg+0x35/0x60 net/socket.c:2134 entry_SYSCALL_64_fastpath+0x1f/0x96 RIP: 0033:0x43fe49 RSP: 002b:00007fffbe244ad8 EFLAGS: 00000217 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fe49 RDX: 0000000000000001 RSI: 000000002020c000 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000217 R12: 00000000004017b0 R13: 0000000000401840 R14: 0000000000000000 R15: 0000000000000000 To fix this, we verify that the cmsg_len is large enough to hold the data to be read, before proceeding further. Reported-by: syzbot <syzkaller-bugs@googlegroups.com> Signed-off-by: Avinash Repaka <avinash.repaka@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-26tcp: Avoid preprocessor directives in tracepoint macro argsMat Martineau1-60/+37
Using a preprocessor directive to check for CONFIG_IPV6 in the middle of a DECLARE_EVENT_CLASS macro's arg list causes sparse to report a series of errors: ./include/trace/events/tcp.h:68:1: error: directive in argument list ./include/trace/events/tcp.h:75:1: error: directive in argument list ./include/trace/events/tcp.h:144:1: error: directive in argument list ./include/trace/events/tcp.h:151:1: error: directive in argument list ./include/trace/events/tcp.h:216:1: error: directive in argument list ./include/trace/events/tcp.h:223:1: error: directive in argument list ./include/trace/events/tcp.h:274:1: error: directive in argument list ./include/trace/events/tcp.h:281:1: error: directive in argument list Once sparse finds an error, it stops printing warnings for the file it is checking. This masks any sparse warnings that would normally be reported for the core TCP code. Instead, handle the preprocessor conditionals in a couple of auxiliary macros. This also has the benefit of reducing duplicate code. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-26tipc: fix memory leak of group member when peer node is lostJon Maloy1-9/+18
When a group member receives a member WITHDRAW event, this might have two reasons: either the peer member is leaving the group, or the link to the member's node has been lost. In the latter case we need to issue a DOWN event to the user right away, and let function tipc_group_filter_msg() perform delete of the member item. However, in this case we miss to change the state of the member item to MBR_LEAVING, so the member item is not deleted, and we have a memory leak. We now separate better between the four sub-cases of a WITHRAW event and make sure that each case is handled correctly. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-26net: sched: fix possible null pointer deref in tcf_block_putJiri Pirko1-0/+2
We need to check block for being null in both tcf_block_put and tcf_block_put_ext. Fixes: 343723dd51ef ("net: sched: fix clsact init error path") Reported-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-26tipc: base group replicast ack counter on number of actual receiversJon Maloy1-1/+3
In commit 2f487712b893 ("tipc: guarantee that group broadcast doesn't bypass group unicast") we introduced a mechanism that requires the first (replicated) broadcast sent after a unicast to be acknowledged by all receivers before permitting sending of the next (true) broadcast. The counter for keeping track of the number of acknowledges to expect is based on the tipc_group::member_cnt variable. But this misses that some of the known members may not be ready for reception, and will never acknowledge the message, either because they haven't fully joined the group or because they are leaving the group. Such members are identified by not fulfilling the condition tested for in the function tipc_group_is_enabled(). We now set the counter for the actual number of acks to receive at the moment the message is sent, by just counting the number of recipients satisfying the tipc_group_is_enabled() test. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-26net_sched: fix a missing rcu barrier in mini_qdisc_pair_swap()Cong Wang1-1/+3
The rcu_barrier_bh() in mini_qdisc_pair_swap() is to wait for flying RCU callback installed by a previous mini_qdisc_pair_swap(), however we miss it on the tp_head==NULL path, which leads to that the RCU callback still uses miniq_old->rcu after it is freed together with qdisc in qdisc_graft(). So just add it on that path too. Fixes: 46209401f8f6 ("net: core: introduce mini_Qdisc and eliminate usage of tp->q for clsact fastpath ") Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com> Tested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Jiri Pirko <jiri@mellanox.com> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-26net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaroundGrygorii Strashko1-0/+1
Under some circumstances driver will perform PHY reset in ksz9031_read_status() to fix autoneg failure case (idle error count = 0xFF). When this happens ksz9031 will not detect link status change any more when connecting to Netgear 1G switch (link can be recovered sometimes by restarting netdevice "ifconfig down up"). Reproduced with TI am572x board equipped with ksz9031 PHY while connecting to Netgear 1G switch. Fix the issue by reconfiguring autonegotiation after PHY reset in ksz9031_read_status(). Fixes: d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-26ip6_gre: fix device features for ioctl setupAlexey Kodanev1-25/+32
When ip6gre is created using ioctl, its features, such as scatter-gather, GSO and tx-checksumming will be turned off: # ip -f inet6 tunnel add gre6 mode ip6gre remote fd00::1 # ethtool -k gre6 (truncated output) tx-checksumming: off scatter-gather: off tcp-segmentation-offload: off generic-segmentation-offload: off [requested on] But when netlink is used, they will be enabled: # ip link add gre6 type ip6gre remote fd00::1 # ethtool -k gre6 (truncated output) tx-checksumming: on scatter-gather: on tcp-segmentation-offload: on generic-segmentation-offload: on This results in a loss of performance when gre6 is created via ioctl. The issue was found with LTP/gre tests. Fix it by moving the setup of device features to a separate function and invoke it with ndo_init callback because both netlink and ioctl will eventually call it via register_netdevice(): register_netdevice() - ndo_init() callback -> ip6gre_tunnel_init() or ip6gre_tap_init() - ip6gre_tunnel_init_common() - ip6gre_tnl_init_features() The moved code also contains two minor style fixes: * removed needless tab from GRE6_FEATURES on NETIF_F_HIGHDMA line. * fixed the issue reported by checkpatch: "Unnecessary parentheses around 'nt->encap.type == TUNNEL_ENCAP_NONE'" Fixes: ac4eb009e477 ("ip6gre: Add support for basic offloads offloads excluding GSO") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-25phylink: ensure AN is enabledRussell King1-0/+1
Ensure that we mark AN as enabled at boot time, rather than leaving it disabled. This is noticable if your SFP module is fiber, and it supports faster speeds than 1G with 2.5G support in place. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-25phylink: ensure the PHY interface mode is appropriately setRussell King1-0/+1
When setting the ethtool settings, ensure that the validated PHY interface mode is propagated to the current link settings, so that 2500BaseX can be selected. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21skbuff: skb_copy_ubufs must release uarg even without user fragsWillem de Bruijn1-1/+2
skb_copy_ubufs creates a private copy of frags[] to release its hold on user frags, then calls uarg->callback to notify the owner. Call uarg->callback even when no frags exist. This edge case can happen when zerocopy_sg_from_iter finds enough room in skb_headlen to copy all the data. Fixes: 3ece782693c4 ("sock: skb_copy_ubufs support for compound pages") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21skbuff: orphan frags before zerocopy cloneWillem de Bruijn1-2/+2
Call skb_zerocopy_clone after skb_orphan_frags, to avoid duplicate calls to skb_uarg(skb)->callback for the same data. skb_zerocopy_clone associates skb_shinfo(skb)->uarg from frag_skb with each segment. This is only safe for uargs that do refcounting, which is those that pass skb_orphan_frags without dropping their shared frags. For others, skb_orphan_frags drops the user frags and sets the uarg to NULL, after which sock_zerocopy_clone has no effect. Qemu hangs were reported due to duplicate vhost_net_zerocopy_callback calls for the same data causing the vhost_net_ubuf_ref_>refcount to drop below zero. Link: http://lkml.kernel.org/r/<CAF=yD-LWyCD4Y0aJ9O0e_CHLR+3JOeKicRRTEVCPxgw4XOcqGQ@mail.gmail.com> Fixes: 1f8b977ab32d ("sock: enable MSG_ZEROCOPY") Reported-by: Andreas Hartmann <andihartmann@01019freenet.de> Reported-by: David Hill <dhill@redhat.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21net: reevalulate autoflowlabel setting after sysctl settingShaohua Li4-4/+13
sysctl.ip6.auto_flowlabels is default 1. In our hosts, we set it to 2. If sockopt doesn't set autoflowlabel, outcome packets from the hosts are supposed to not include flowlabel. This is true for normal packet, but not for reset packet. The reason is ipv6_pinfo.autoflowlabel is set in sock creation. Later if we change sysctl.ip6.auto_flowlabels, the ipv6_pinfo.autoflowlabel isn't changed, so the sock will keep the old behavior in terms of auto flowlabel. Reset packet is suffering from this problem, because reset packet is sent from a special control socket, which is created at boot time. Since sysctl.ipv6.auto_flowlabels is 1 by default, the control socket will always have its ipv6_pinfo.autoflowlabel set, even after user set sysctl.ipv6.auto_flowlabels to 1, so reset packset will always have flowlabel. Normal sock created before sysctl setting suffers from the same issue. We can't even turn off autoflowlabel unless we kill all socks in the hosts. To fix this, if IPV6_AUTOFLOWLABEL sockopt is used, we use the autoflowlabel setting from user, otherwise we always call ip6_default_np_autolabel() which has the new settings of sysctl. Note, this changes behavior a little bit. Before commit 42240901f7c4 (ipv6: Implement different admin modes for automatic flow labels), the autoflowlabel behavior of a sock isn't sticky, eg, if sysctl changes, existing connection will change autoflowlabel behavior. After that commit, autoflowlabel behavior is sticky in the whole life of the sock. With this patch, the behavior isn't sticky again. Cc: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Tom Herbert <tom@quantonium.net> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21openvswitch: Fix pop_vlan action for double tagged framesEric Garver1-3/+12
skb_vlan_pop() expects skb->protocol to be a valid TPID for double tagged frames. So set skb->protocol to the TPID and let skb_vlan_pop() shift the true ethertype into position for us. Fixes: 5108bbaddc37 ("openvswitch: add processing of L3 packets") Signed-off-by: Eric Garver <e@erig.me> Reviewed-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21Revert "bdi: add error handle for bdi_debug_register"Jens Axboe1-4/+1
This reverts commit a0747a859ef6d3cc5b6cd50eb694499b78dd0025. It breaks some booting for some users, and more than a week into this, there's still no good fix. Revert this commit for now until a solution has been found. Reported-by: Laura Abbott <labbott@redhat.com> Reported-by: Bruno Wolff III <bruno@wolff.to> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-21ipv6: Honor specified parameters in fibmatch lookupIdo Schimmel1-8/+11
Currently, parameters such as oif and source address are not taken into account during fibmatch lookup. Example (IPv4 for reference) before patch: $ ip -4 route show 192.0.2.0/24 dev dummy0 proto kernel scope link src 192.0.2.1 198.51.100.0/24 dev dummy1 proto kernel scope link src 198.51.100.1 $ ip -6 route show 2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium 2001:db8:2::/64 dev dummy1 proto kernel metric 256 pref medium fe80::/64 dev dummy0 proto kernel metric 256 pref medium fe80::/64 dev dummy1 proto kernel metric 256 pref medium $ ip -4 route get fibmatch 192.0.2.2 oif dummy0 192.0.2.0/24 dev dummy0 proto kernel scope link src 192.0.2.1 $ ip -4 route get fibmatch 192.0.2.2 oif dummy1 RTNETLINK answers: No route to host $ ip -6 route get fibmatch 2001:db8:1::2 oif dummy0 2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium $ ip -6 route get fibmatch 2001:db8:1::2 oif dummy1 2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium After: $ ip -6 route get fibmatch 2001:db8:1::2 oif dummy0 2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium $ ip -6 route get fibmatch 2001:db8:1::2 oif dummy1 RTNETLINK answers: Network is unreachable The problem stems from the fact that the necessary route lookup flags are not set based on these parameters. Instead of duplicating the same logic for fibmatch, we can simply resolve the original route from its copy and dump it instead. Fixes: 18c3a61c4264 ("net: ipv6: RTM_GETROUTE: return matched fib result when requested") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21tools/kvm_stat: sort '-f help' outputStefan Raspl1-10/+6
Sort the fields returned by specifying '-f help' on the command line. While at it, simplify the code a bit, indent the output and eliminate an extra blank line at the beginning. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21kvm: x86: fix RSM when PCID is non-zeroPaolo Bonzini1-7/+25
rsm_load_state_64() and rsm_enter_protected_mode() load CR3, then CR4 & ~PCIDE, then CR0, then CR4. However, setting CR4.PCIDE fails if CR3[11:0] != 0. It's probably easier in the long run to replace rsm_enter_protected_mode() with an emulator callback that sets all the special registers (like KVM_SET_SREGS would do). For now, set the PCID field of CR3 only after CR4.PCIDE is 1. Reported-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Fixes: 660a5d517aaab9187f93854425c4c63f4a09195c Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-21bpf: do not allow root to mangle valid pointersAlexei Starovoitov2-95/+63
Do not allow root to convert valid pointers into unknown scalars. In particular disallow: ptr &= reg ptr <<= reg ptr += ptr and explicitly allow: ptr -= ptr since pkt_end - pkt == length 1. This minimizes amount of address leaks root can do. In the future may need to further tighten the leaks with kptr_restrict. 2. If program has such pointer math it's likely a user mistake and when verifier complains about it right away instead of many instructions later on invalid memory access it's easier for users to fix their progs. 3. when register holding a pointer cannot change to scalar it allows JITs to optimize better. Like 32-bit archs could use single register for pointers instead of a pair required to hold 64-bit scalars. 4. reduces architecture dependent behavior. Since code: r1 = r10; r1 &= 0xff; if (r1 ...) will behave differently arm64 vs x64 and offloaded vs native. A significant chunk of ptr mangling was allowed by commit f1174f77b50c ("bpf/verifier: rework value tracking") yet some of it was allowed even earlier. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21selftests/bpf: add tests for recent bugfixesJann Horn1-16/+533
These tests should cover the following cases: - MOV with both zero-extended and sign-extended immediates - implicit truncation of register contents via ALU32/MOV32 - implicit 32-bit truncation of ALU32 output - oversized register source operand for ALU32 shift - right-shift of a number that could be positive or negative - map access where adding the operation size to the offset causes signed 32-bit overflow - direct stack access at a ~4GiB offset Also remove the F_LOAD_WITH_STRICT_ALIGNMENT flag from a bunch of tests that should fail independent of what flags userspace passes. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21bpf: fix integer overflowsAlexei Starovoitov2-2/+50
There were various issues related to the limited size of integers used in the verifier: - `off + size` overflow in __check_map_access() - `off + reg->off` overflow in check_mem_access() - `off + reg->var_off.value` overflow or 32-bit truncation of `reg->var_off.value` in check_mem_access() - 32-bit truncation in check_stack_boundary() Make sure that any integer math cannot overflow by not allowing pointer math with large values. Also reduce the scope of "scalar op scalar" tracking. Fixes: f1174f77b50c ("bpf/verifier: rework value tracking") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21bpf: don't prune branches when a scalar is replaced with a pointerJann Horn1-8/+7
This could be made safe by passing through a reference to env and checking for env->allow_ptr_leaks, but it would only work one way and is probably not worth the hassle - not doing it will not directly lead to program rejection. Fixes: f1174f77b50c ("bpf/verifier: rework value tracking") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21bpf: force strict alignment checks for stack pointersJann Horn1-0/+5
Force strict alignment checks for stack pointers because the tracking of stack spills relies on it; unaligned stack accesses can lead to corruption of spilled registers, which is exploitable. Fixes: f1174f77b50c ("bpf/verifier: rework value tracking") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21bpf: fix missing error return in check_stack_boundary()Jann Horn1-0/+1
Prevent indirect stack accesses at non-constant addresses, which would permit reading and corrupting spilled pointers. Fixes: f1174f77b50c ("bpf/verifier: rework value tracking") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21bpf: fix 32-bit ALU op verificationJann Horn1-11/+17
32-bit ALU ops operate on 32-bit values and have 32-bit outputs. Adjust the verifier accordingly. Fixes: f1174f77b50c ("bpf/verifier: rework value tracking") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21bpf: fix incorrect tracking of register size truncationJann Horn1-17/+27
Properly handle register truncation to a smaller size. The old code first mirrors the clearing of the high 32 bits in the bitwise tristate representation, which is correct. But then, it computes the new arithmetic bounds as the intersection between the old arithmetic bounds and the bounds resulting from the bitwise tristate representation. Therefore, when coerce_reg_to_32() is called on a number with bounds [0xffff'fff8, 0x1'0000'0007], the verifier computes [0xffff'fff8, 0xffff'ffff] as bounds of the truncated number. This is incorrect: The truncated number could also be in the range [0, 7], and no meaningful arithmetic bounds can be computed in that case apart from the obvious [0, 0xffff'ffff]. Starting with v4.14, this is exploitable by unprivileged users as long as the unprivileged_bpf_disabled sysctl isn't set. Debian assigned CVE-2017-16996 for this issue. v2: - flip the mask during arithmetic bounds calculation (Ben Hutchings) v3: - add CVE number (Ben Hutchings) Fixes: b03c9f9fdc37 ("bpf/verifier: track signed and unsigned min/max values") Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21bpf: fix incorrect sign extension in check_alu_op()Jann Horn1-1/+7
Distinguish between BPF_ALU64|BPF_MOV|BPF_K (load 32-bit immediate, sign-extended to 64-bit) and BPF_ALU|BPF_MOV|BPF_K (load 32-bit immediate, zero-padded to 64-bit); only perform sign extension in the first case. Starting with v4.14, this is exploitable by unprivileged users as long as the unprivileged_bpf_disabled sysctl isn't set. Debian assigned CVE-2017-16995 for this issue. v3: - add CVE number (Ben Hutchings) Fixes: 484611357c19 ("bpf: allow access into map value arrays") Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-21bpf/verifier: fix bounds calculation on BPF_RSHEdward Cree1-14/+16
Incorrect signed bounds were being computed. If the old upper signed bound was positive and the old lower signed bound was negative, this could cause the new upper signed bound to be too low, leading to security issues. Fixes: b03c9f9fdc37 ("bpf/verifier: track signed and unsigned min/max values") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Alexei Starovoitov <ast@kernel.org> [jannh@google.com: changed description to reflect bug impact] Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-20null_blk: unalign call_single_dataJens Axboe1-2/+2
Commit 966a967116e6 randomly added alignment to this structure, but it's actually detrimental to performance of null_blk. Test case: Running on both the home and remote node shows a ~5% degradation in performance. While in there, move blk_status_t to the hole after the integer tag in the nullb_cmd structure. After this patch, we shrink the size from 192 to 152 bytes. Fixes: 966a967116e69 ("smp: Avoid using two cache lines for struct call_single_data") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-20block: unalign call_single_data in struct requestJens Axboe1-1/+1
A previous change blindly added massive alignment to the call_single_data structure in struct request. This ballooned it in size from 296 to 320 bytes on my setup, for no valid reason at all. Use the unaligned struct __call_single_data variant instead. Fixes: 966a967116e69 ("smp: Avoid using two cache lines for struct call_single_data") Cc: stable@vger.kernel.org # v4.14 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-20ipv4: Fix use-after-free when flushing FIB tablesIdo Schimmel1-2/+7
Since commit 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse") the local table uses the same trie allocated for the main table when custom rules are not in use. When a net namespace is dismantled, the main table is flushed and freed (via an RCU callback) before the local table. In case the callback is invoked before the local table is iterated, a use-after-free can occur. Fix this by iterating over the FIB tables in reverse order, so that the main table is always freed after the local table. v3: Reworded comment according to Alex's suggestion. v2: Add a comment to make the fix more explicit per Dave's and Alex's feedback. Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20s390/qeth: fix error handling in checksum cmd callbackJulian Wiedmann1-1/+8
Make sure to check both return code fields before processing the response. Otherwise we risk operating on invalid data. Fixes: c9475369bd2b ("s390/qeth: rework RX/TX checksum offload") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20tipc: remove joining group member from congested listJon Maloy1-4/+2
When we receive a JOIN message from a peer member, the message may contain an advertised window value ADV_IDLE that permits removing the member in question from the tipc_group::congested list. However, since the removal has been made conditional on that the advertised window is *not* ADV_IDLE, we miss this case. This has the effect that a sender sometimes may enter a state of permanent, false, broadcast congestion. We fix this by unconditinally removing the member from the congested list before calling tipc_member_update(), which might potentially sort it into the list again. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20selftests: net: Adding config fragment CONFIG_NUMA=yNaresh Kamboju1-0/+1
kernel config fragement CONFIG_NUMA=y is need for reuseport_bpf_numa. Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20block-throttle: avoid double chargeShaohua Li4-12/+9
If a bio is throttled and split after throttling, the bio could be resubmited and enters the throttling again. This will cause part of the bio to be charged multiple times. If the cgroup has an IO limit, the double charge will significantly harm the performance. The bio split becomes quite common after arbitrary bio size change. To fix this, we always set the BIO_THROTTLED flag if a bio is throttled. If the bio is cloned/split, we copy the flag to new bio too to avoid a double charge. However, cloned bio could be directed to a new disk, keeping the flag be a problem. The observation is we always set new disk for the bio in this case, so we can clear the flag in bio_set_dev(). This issue exists for a long time, arbitrary bio size change just makes it worse, so this should go into stable at least since v4.2. V1-> V2: Not add extra field in bio based on discussion with Tejun Cc: Vivek Goyal <vgoyal@redhat.com> Cc: stable@vger.kernel.org Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-20nfp: bpf: keep track of the offloaded programJakub Kicinski2-4/+51
After TC offloads were converted to callbacks we have no choice but keep track of the offloaded filter in the driver. The check for nn->dp.bpf_offload_xdp was a stop gap solution to make sure failed TC offload won't disable XDP, it's no longer necessary. nfp_net_bpf_offload() will return -EBUSY on TC vs XDP conflicts. Fixes: 3f7889c4c79b ("net: sched: cls_bpf: call block callbacks for offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20cls_bpf: fix offload assumptions after callback conversionJakub Kicinski3-67/+43
cls_bpf used to take care of tracking what offload state a filter is in, i.e. it would track if offload request succeeded or not. This information would then be used to issue correct requests to the driver, e.g. requests for statistics only on offloaded filters, removing only filters which were offloaded, using add instead of replace if previous filter was not added etc. This tracking of offload state no longer functions with the new callback infrastructure. There could be multiple entities trying to offload the same filter. Throw out all the tracking and corresponding commands and simply pass to the drivers both old and new bpf program. Drivers will have to deal with offload state tracking by themselves. Fixes: 3f7889c4c79b ("net: sched: cls_bpf: call block callbacks for offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: Fix double free and memory corruption in get_net_ns_by_id()Eric W. Biederman1-1/+1
(I can trivially verify that that idr_remove in cleanup_net happens after the network namespace count has dropped to zero --EWB) Function get_net_ns_by_id() does not check for net::count after it has found a peer in netns_ids idr. It may dereference a peer, after its count has already been finaly decremented. This leads to double free and memory corruption: put_net(peer) rtnl_lock() atomic_dec_and_test(&peer->count) [count=0] ... __put_net(peer) get_net_ns_by_id(net, id) spin_lock(&cleanup_list_lock) list_add(&net->cleanup_list, &cleanup_list) spin_unlock(&cleanup_list_lock) queue_work() peer = idr_find(&net->netns_ids, id) | get_net(peer) [count=1] | ... | (use after final put) v ... cleanup_net() ... spin_lock(&cleanup_list_lock) ... list_replace_init(&cleanup_list, ..) ... spin_unlock(&cleanup_list_lock) ... ... ... ... put_net(peer) ... atomic_dec_and_test(&peer->count) [count=0] ... spin_lock(&cleanup_list_lock) ... list_add(&net->cleanup_list, &cleanup_list) ... spin_unlock(&cleanup_list_lock) ... queue_work() ... rtnl_unlock() rtnl_lock() ... for_each_net(tmp) { ... id = __peernet2id(tmp, peer) ... spin_lock_irq(&tmp->nsid_lock) ... idr_remove(&tmp->netns_ids, id) ... ... ... net_drop_ns() ... net_free(peer) ... } ... | v cleanup_net() ... (Second free of peer) Also, put_net() on the right cpu may reorder with left's cpu list_replace_init(&cleanup_list, ..), and then cleanup_list will be corrupted. Since cleanup_net() is executed in worker thread, while put_net(peer) can happen everywhere, there should be enough time for concurrent get_net_ns_by_id() to pick the peer up, and the race does not seem to be unlikely. The patch fixes the problem in standard way. (Also, there is possible problem in peernet2id_alloc(), which requires check for net::count under nsid_lock and maybe_get_net(peer), but in current stable kernel it's used under rtnl_lock() and it has to be safe. Openswitch begun to use peernet2id_alloc(), and possibly it should be fixed too. While this is not in stable kernel yet, so I'll send a separate message to netdev@ later). Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Fixes: 0c7aecd4bde4 "netns: add rtnl cmd to add and get peer netns ids" Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: mvneta: eliminate wrong call to handle rx descriptor errorYelena Krivosheev1-1/+1
There are few reasons in mvneta_rx_swbm() function when received packet is dropped. mvneta_rx_error() should be called only if error bit [16] is set in rx descriptor. [gregory.clement@free-electrons.com: add fixes tag] Cc: stable@vger.kernel.org Fixes: dc35a10f68d3 ("net: mvneta: bm: add support for hardware buffer management") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Tested-by: Dmitri Epshtein <dima@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: mvneta: use proper rxq_number in loop on rx queuesYelena Krivosheev1-1/+1
When adding the RX queue association with each CPU, a typo was made in the mvneta_cleanup_rxqs() function. This patch fixes it. [gregory.clement@free-electrons.com: add commit log and fixes tag] Cc: stable@vger.kernel.org Fixes: 2dcf75e2793c ("net: mvneta: Associate RX queues with each CPU") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Tested-by: Dmitri Epshtein <dima@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: mvneta: clear interface link status on port disableYelena Krivosheev1-0/+4
When port connect to PHY in polling mode (with poll interval 1 sec), port and phy link status must be synchronize in order don't loss link change event. [gregory.clement@free-electrons.com: add fixes tag] Cc: <stable@vger.kernel.org> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Tested-by: Dmitri Epshtein <dima@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19Do not hash userspace addresses in fault handlersKees Cook4-4/+4
The hashing of %p was designed to restrict kernel addresses. There is no reason to hash the userspace values seen during a segfault report, so switch these to %px. (Some architectures already use %lx.) Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-20bpf: Fix tools and testing build.David Miller2-5/+5
I'm getting various build failures on sparc64. The key is usually that the userland tools get built 32-bit. 1) clock_gettime() is in librt, so that must be added to the link libraries. 2) "sizeof(x)" must be printed with "%Z" printf prefix. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-19net/mlx5: Stay in polling mode when command EQ destroy failsMoshe Shemesh1-3/+1
During unload, on mlx5_stop_eqs we move command interface from events mode to polling mode, but if command interface EQ destroy fail we move back to events mode. That's wrong since even if we fail to destroy command interface EQ, we do release its irq, so no interrupts will be received. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5: Cleanup IRQs in case of unload failureMoshe Shemesh2-8/+14
When mlx5_stop_eqs fails to destroy any of the eqs it returns with an error. In such failure flow the function will return without releasing all EQs irqs and then pci_free_irq_vectors will fail. Fix by only warn on destroy EQ failure and continue to release other EQs and their irqs. It fixes the following kernel trace: kernel: kernel BUG at drivers/pci/msi.c:352! ... ... kernel: Call Trace: kernel: pci_disable_msix+0xd3/0x100 kernel: pci_free_irq_vectors+0xe/0x20 kernel: mlx5_load_one.isra.17+0x9f5/0xec0 [mlx5_core] Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5: Fix steering memory leakMaor Gottlieb1-2/+14
Flow steering priority and namespace are software only objects that didn't have the proper destructors and were not freed during steering cleanup. Fix it by adding destructor functions for these objects. Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5e: Prevent possible races in VXLAN control flowGal Pressman1-0/+4
When calling add/remove VXLAN port, a lock must be held in order to prevent race scenarios when more than one add/remove happens at the same time. Fix by holding our state_lock (mutex) as done by all other parts of the driver. Note that the spinlock protecting the radix-tree is still needed in order to synchronize radix-tree access from softirq context. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5e: Add refcount to VXLAN structureGal Pressman2-23/+28
A refcount mechanism must be implemented in order to prevent unwanted scenarios such as: - Open an IPv4 VXLAN interface - Open an IPv6 VXLAN interface (different socket) - Remove one of the interfaces With current implementation, the UDP port will be removed from our VXLAN database and turn off the offloads for the other interface, which is still active. The reference count mechanism will only allow UDP port removals once all consumers are gone. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.