| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Colin reports that Coverity complains about checking for poll being
non-zero after having dereferenced it multiple times. This is a valid
complaint, and actually a leftover from back when this code was based
on the aio poll code.
Kill the redundant check.
Link: https://lore.kernel.org/io-uring/fe70c532-e2a7-3722-58a1-0fa4e5c5ff2c@canonical.com/
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Accessing raw timers (currently only CLOCK_MONOTONIC_RAW) through VDSO
doesn't return the correct time when using the GIC as clock source.
The address of the GIC mapped page is in this case not calculated
correctly. The GIC mapped page is calculated from the VDSO data by
subtracting PAGE_SIZE:
void *get_gic(const struct vdso_data *data) {
return (void __iomem *)data - PAGE_SIZE;
}
However, the data pointer is not page aligned for raw clock sources.
This is because the VDSO data for raw clock sources (CS_RAW = 1) is
stored after the VDSO data for coarse clock sources (CS_HRES_COARSE = 0).
Therefore, only the VDSO data for CS_HRES_COARSE is page aligned:
+--------------------+
| |
| vd[CS_RAW] | ---+
| vd[CS_HRES_COARSE] | |
+--------------------+ | -PAGE_SIZE
| | |
| GIC mapped page | <--+
| |
+--------------------+
When __arch_get_hw_counter() is called with &vd[CS_RAW], get_gic returns
the wrong address (somewhere inside the GIC mapped page). The GIC counter
values are not returned which results in an invalid time.
Fixes: a7f4df4e21dd ("MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime()")
Signed-off-by: Martin Fäcknitz <faecknitz@hotsplots.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
S390's init_idle_preempt_count(p, cpu) doesn't actually let us initialize the
preempt_count of the requested CPU's idle task: it unconditionally writes
to the current CPU's. This clearly conflicts with idle_threads_init(),
which intends to initialize *all* the idle tasks, including their
preempt_count (or their CPU's, if the arch uses a per-CPU preempt_count).
Unfortunately, it seems the way s390 does things doesn't let us initialize
every possible CPU's preempt_count early on, as the pages where this
resides are only allocated when a CPU is brought up and are freed when it
is brought down.
Let the arch-specific code set a CPU's preempt_count when its lowcore is
allocated, and turn init_idle_preempt_count() into an empty stub.
Fixes: f1a0a376ca0c ("sched/core: Initialize the idle task with preemption disabled")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210707163338.1623014-1-valentin.schneider@arm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Both clang and gcc (for -march=z13 and later) align functions to 16
bytes at -O2 to benefit branch prediction.
Make asm symbols alignment consistent with that.
This also benefits potential ftrace code patching, which is currently
able to patch 8 aligned bytes at once.
With defconfig this currently increases .text size by 4104 bytes.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Lower case matches the call_on_stack() macro and is easier to read.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Make sure the to be called function takes no arguments (and returns void).
Otherwise usage of CALL_ON_STACK_NORETURN() would generate broken code.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The existing CALL_ON_STACK() macro allows for subtle bugs:
- There is no type checking of the function that is being called. That
is: missing or too many arguments do not cause any compile error or
warning. The same is true if the return type of the called function
changes. This can lead to quite random bugs.
- Sign and zero extension of arguments is missing. Given that the s390
C ABI requires that the caller of a function performs proper sign
and zero extension this can also lead to subtle bugs.
- If arguments to the CALL_ON_STACK() macros contain functions calls
register corruption can happen due to register asm constructs being
used.
Therefore introduce a new call_on_stack() macro which is supposed to
fix all these problems.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Make on_async_stack() a bit more readable, even though as usual it
depends if one considers "!!!" readable or not.
At least the new construct to check if the async stack is in use or
not is a bit shorter and generates slightly better code.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Move do_softirq_own_stack() to proper header file so it can be
inlined; saving a few cycles.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
do_softirq_own_stack() is always called from task context and
therefore it is not necessary to check if the async stack is
currently used.
Remove the check and directly switch to async stack.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
This is the second part of the cleanup for the header file ap.h
to remove the register asm statements. This patch deals with
the inline ap_dqap() function where within the assembler code
an odd register of an register pair is to be addressed.
[hca@linux.ibm.com: this intentionally breaks compilation with any
clang compilers prior to llvm-project commit 458eac257377 ("[SystemZ]
Support the 'N' code for the odd register in inline-asm.").
This is hopefully the last clang kernel compile breakage caused by
incompatibilities between gcc and clang.]
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
PIF_SYSCALL_RESTART is now only used to restart execve when loading
PGSTE binaries. Rename the flag to reflect that, and avoid people
thinking that this bit has anything to do with generic syscall
restarting.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
On s390, execve might have to be restarted for PGSTE binaries
like kvm. In the past this was done via the PIF_SYSCALL_RESTART
bit. However, with the recent changes, syscalls are now restarted
differently. Now that execve() is the only call that might get
restarted via PIF_SYSCALL_RESTART, move the loop to do_syscall().
This also has the advantage that the restart is no longer visible
to userspace.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
{rt_}sigreturn is now called from the vdso, so we no longer
need the svc on the stack, and therefore no hack to support that
mechanism on machines with non-executable stack.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
with generic entry, there's a bug when it comes to restarting of signals.
The failing sequence is:
a) a signal is coming in, and no handler is registered, so the lower
part of arch_do_signal_or_restart() in arch/s390/kernel/signal.c
sets PIF_SYSCALL_RESTART.
b) a second signal gets pending while the kernel is still in the exit
loop, and for that one, a handler exists.
c) The first part of arch_do_signal_or_restart() is called. That part
calls handle_signal(), which sets up stack + registers for handling
the signal.
d) __do_syscall() in arch/s390/kernel/syscall.c checks for
PIF_SYSCALL_RESTART right before leaving to userspace. If it is set,
it restart's the syscall. However, the registers are already setup
for handling a signal from c). The syscall is now restarted with the
wrong arguments.
Change the code to:
- use vdso for syscall_restart() instead of PIF_SYSCALL_RESTART because
we cannot rewind and go back to userspace on s390 because the system call
number might be encoded in the svc instruction.
- for all other syscalls we rewind the PSW and return to userspace.
Cc: <stable@kernel.org> # v5.12+ d57778feb987: s390/vdso: always enable vdso
Cc: <stable@kernel.org> # v5.12+ 686341f2548b: s390/vdso64: add sigreturn,rt_sigreturn and restart_syscall
Cc: <stable@kernel.org> # v5.12+ 43e1f76b0b69: s390/vdso: rename VDSO64_LBASE to VDSO_LBASE
Cc: <stable@kernel.org> # v5.12+ 779df2248739: s390/vdso: add minimal compat vdso
Cc: <stable@kernel.org> # v5.12+
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
We have requests like IORING_OP_FILES_UPDATE that don't go through
->iopoll_list but get completed in place under ->uring_lock, and so
after dropping the lock io_iopoll_check() should expect that some CQEs
might have get completed in a meanwhile.
Currently such events won't be accounted in @nr_events, and the loop
will continue to poll even if there is enough of CQEs. It shouldn't be a
problem as it's not likely to happen and so, but not nice either. Just
return earlier in this case, it should be enough.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/66ef932cc66a34e3771bbae04b2953a8058e9d05.1625747741.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
Jens Axboe
Martin Fäcknitz
Valentin Schneider
Vasily Gorbik
Heiko Carstens
Harald Freudenberger
Sven Schnelle
Pavel Begunkov