| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
collapse_file() in khugepaged passes PAGE_SIZE as the number of pages to
be read to page_cache_sync_readahead(). The intent was probably to read
a single page. Fix it to use the number of pages to the end of the
window instead.
Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Eric Biggers <ebiggers@google.com>
Link: https://lkml.kernel.org/r/20200903140844.14194-2-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is a race between the assignment of `table->data` and write value
to the pointer of `table->data` in the __do_proc_doulongvec_minmax() on
the other thread.
CPU0: CPU1:
proc_sys_write
hugetlb_sysctl_handler proc_sys_call_handler
hugetlb_sysctl_handler_common hugetlb_sysctl_handler
table->data = &tmp; hugetlb_sysctl_handler_common
table->data = &tmp;
proc_doulongvec_minmax
do_proc_doulongvec_minmax sysctl_head_finish
__do_proc_doulongvec_minmax unuse_table
i = table->data;
*i = val; // corrupt CPU1's stack
Fix this by duplicating the `table`, and only update the duplicate of
it. And introduce a helper of proc_hugetlb_doulongvec_minmax() to
simplify the code.
The following oops was seen:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
Code: Bad RIP value.
...
Call Trace:
? set_max_huge_pages+0x3da/0x4f0
? alloc_pool_huge_page+0x150/0x150
? proc_doulongvec_minmax+0x46/0x60
? hugetlb_sysctl_handler_common+0x1c7/0x200
? nr_hugepages_store+0x20/0x20
? copy_fd_bitmaps+0x170/0x170
? hugetlb_sysctl_handler+0x1e/0x20
? proc_sys_call_handler+0x2f1/0x300
? unregister_sysctl_table+0xb0/0xb0
? __fd_install+0x78/0x100
? proc_sys_write+0x14/0x20
? __vfs_write+0x4d/0x90
? vfs_write+0xef/0x240
? ksys_write+0xc0/0x160
? __ia32_sys_read+0x50/0x50
? __close_fd+0x129/0x150
? __x64_sys_write+0x43/0x50
? do_syscall_64+0x6c/0x200
? entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: e5ff215941d5 ("hugetlb: multiple hstates for multiple page sizes")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20200828031146.43035-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic
hugepages using cma"), the gigantic page would be allocated from node
which is not the preferred node, although there are pages available from
that node. The reason is that the nid parameter has been ignored in
alloc_gigantic_page().
Besides, the __GFP_THISNODE also need be checked if user required to
alloc only from the preferred node.
After this patch, the preferred node is tried first before other allowed
nodes, and don't try to allocate from other nodes if __GFP_THISNODE is
specified. If user don't specify the preferred node, the current node
will be used as preferred node, which makes sure consistent behavior of
allocating gigantic and non-gigantic hugetlb page.
Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Link: https://lkml.kernel.org/r/20200902025016.697260-1-lixinhai.lxh@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The code to remove a migration PTE and replace it with a device private
PTE was not copying the soft dirty bit from the migration entry. This
could lead to page contents not being marked dirty when faulting the page
back from device private memory.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Link: https://lkml.kernel.org/r/20200831212222.22409-3-rcampbell@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/migrate: preserve soft dirty in remove_migration_pte()".
I happened to notice this from code inspection after seeing Alistair
Popple's patch ("mm/rmap: Fixup copying of soft dirty and uffd ptes").
This patch (of 2):
The check for is_zone_device_page() and is_device_private_page() is
unnecessary since the latter is sufficient to determine if the page is a
device private page. Simplify the code for easier reading.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Link: https://lkml.kernel.org/r/20200831212222.22409-1-rcampbell@nvidia.com
Link: https://lkml.kernel.org/r/20200831212222.22409-2-rcampbell@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
During memory migration a pte is temporarily replaced with a migration
swap pte. Some pte bits from the existing mapping such as the soft-dirty
and uffd write-protect bits are preserved by copying these to the
temporary migration swap pte.
However these bits are not stored at the same location for swap and
non-swap ptes. Therefore testing these bits requires using the
appropriate helper function for the given pte type.
Unfortunately several code locations were found where the wrong helper
function is being used to test soft_dirty and uffd_wp bits which leads to
them getting incorrectly set or cleared during page-migration.
Fix these by using the correct tests based on pte type.
Fixes: a5430dda8a3a ("mm/migrate: support un-addressable ZONE_DEVICE page in migration")
Fixes: 8c3328f1f36a ("mm/migrate: migrate_vma() unmap page from vma while collecting pages")
Fixes: f45ec5ff16a7 ("userfaultfd: wp: support swap and page migration")
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Alistair Popple <alistair@popple.id.au>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200825064232.10023-2-alistair@popple.id.au
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit f45ec5ff16a75 ("userfaultfd: wp: support swap and page migration")
introduced support for tracking the uffd wp bit during page migration.
However the non-swap PTE variant was used to set the flag for zone device
private pages which are a type of swap page.
This leads to corruption of the swap offset if the original PTE has the
uffd_wp flag set.
Fixes: f45ec5ff16a75 ("userfaultfd: wp: support swap and page migration")
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Link: https://lkml.kernel.org/r/20200825064232.10023-1-alistair@popple.id.au
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The syzbot reported the below use-after-free:
BUG: KASAN: use-after-free in madvise_willneed mm/madvise.c:293 [inline]
BUG: KASAN: use-after-free in madvise_vma mm/madvise.c:942 [inline]
BUG: KASAN: use-after-free in do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145
Read of size 8 at addr ffff8880a6163eb0 by task syz-executor.0/9996
CPU: 0 PID: 9996 Comm: syz-executor.0 Not tainted 5.9.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x18f/0x20d lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383
__kasan_report mm/kasan/report.c:513 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
madvise_willneed mm/madvise.c:293 [inline]
madvise_vma mm/madvise.c:942 [inline]
do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145
do_madvise mm/madvise.c:1169 [inline]
__do_sys_madvise mm/madvise.c:1171 [inline]
__se_sys_madvise mm/madvise.c:1169 [inline]
__x64_sys_madvise+0xd9/0x110 mm/madvise.c:1169
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Allocated by task 9992:
kmem_cache_alloc+0x138/0x3a0 mm/slab.c:3482
vm_area_alloc+0x1c/0x110 kernel/fork.c:347
mmap_region+0x8e5/0x1780 mm/mmap.c:1743
do_mmap+0xcf9/0x11d0 mm/mmap.c:1545
vm_mmap_pgoff+0x195/0x200 mm/util.c:506
ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 9992:
kmem_cache_free.part.0+0x67/0x1f0 mm/slab.c:3693
remove_vma+0x132/0x170 mm/mmap.c:184
remove_vma_list mm/mmap.c:2613 [inline]
__do_munmap+0x743/0x1170 mm/mmap.c:2869
do_munmap mm/mmap.c:2877 [inline]
mmap_region+0x257/0x1780 mm/mmap.c:1716
do_mmap+0xcf9/0x11d0 mm/mmap.c:1545
vm_mmap_pgoff+0x195/0x200 mm/util.c:506
ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
It is because vma is accessed after releasing mmap_lock, but someone
else acquired the mmap_lock and the vma is gone.
Releasing mmap_lock after accessing vma should fix the problem.
Fixes: 692fe62433d4c ("mm: Handle MADV_WILLNEED through vfs_fadvise()")
Reported-by: syzbot+b90df26038d1d5d85c97@syzkaller.appspotmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org> [5.4+]
Link: https://lkml.kernel.org/r/20200816141204.162624-1-shy828301@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The usage of "capture group (...)" in the immediate condition after `&&`
results in `$1` being uninitialized. This issues a warning "Use of
uninitialized value $1 in regexp compilation at ./scripts/checkpatch.pl
line 2638".
I noticed this bug while running checkpatch on the set of commits from
v5.7 to v5.8-rc1 of the kernel on the commits with a diff content in
their commit message.
This bug was introduced in the script by commit e518e9a59ec3
("checkpatch: emit an error when there's a diff in a changelog"). It
has been in the script since then.
The author intended to store the match made by capture group in variable
`$1`. This should have contained the name of the file as `[\w/]+`
matched. However, this couldn't be accomplished due to usage of capture
group and `$1` in the same regular expression.
Fix this by placing the capture group in the condition before `&&`.
Thus, `$1` can be initialized to the text that capture group matches
thereby setting it to the desired and required value.
Fixes: e518e9a59ec3 ("checkpatch: emit an error when there's a diff in a changelog")
Signed-off-by: Mrinal Pandey <mrinalmni@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Joe Perches <joe@perches.com>
Link: https://lkml.kernel.org/r/20200714032352.f476hanaj2dlmiot@mrinalpandey
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
definition of sysctl_max_threads to match its prototype in
linux/sysctl.h which fixes the following sparse error/warning:
kernel/fork.c:3050:47: warning: incorrect type in argument 3 (different address spaces)
kernel/fork.c:3050:47: expected void *
kernel/fork.c:3050:47: got void [noderef] __user *buffer
kernel/fork.c:3036:5: error: symbol 'sysctl_max_threads' redeclared with different type (incompatible argument 3 (different address spaces)):
kernel/fork.c:3036:5: int extern [addressable] [signed] [toplevel] sysctl_max_threads( ... )
kernel/fork.c: note: in included file (through include/linux/key.h, include/linux/cred.h, include/linux/sched/signal.h, include/linux/sched/cputime.h):
include/linux/sysctl.h:242:5: note: previously declared as:
include/linux/sysctl.h:242:5: int extern [addressable] [signed] [toplevel] sysctl_max_threads( ... )
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20200825093647.24263-1-tklauser@distanz.ch
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
signature of proc_ipc_sem_dointvec to match ctl_table.proc_handler which
fixes the following sparse error/warning:
ipc/ipc_sysctl.c:94:47: warning: incorrect type in argument 3 (different address spaces)
ipc/ipc_sysctl.c:94:47: expected void *buffer
ipc/ipc_sysctl.c:94:47: got void [noderef] __user *buffer
ipc/ipc_sysctl.c:194:35: warning: incorrect type in initializer (incompatible argument 3 (different address spaces))
ipc/ipc_sysctl.c:194:35: expected int ( [usertype] *proc_handler )( ... )
ipc/ipc_sysctl.c:194:35: got int ( * )( ... )
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20200825105846.5193-1-tklauser@distanz.ch
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__apply_to_page_range() is also used to change and/or allocate
page-table pages in the vmalloc area of the address space. Make sure
these changes get synchronized to other page-tables in the system by
calling arch_sync_kernel_mappings() when necessary.
The impact appears limited to x86-32, where apply_to_page_range may miss
updating the PMD. That leads to explosions in drivers like
BUG: unable to handle page fault for address: fe036000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
*pde = 00000000
Oops: 0002 [#1] SMP
CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16
Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015
EIP: __execlists_context_alloc+0x132/0x2d0 [i915]
Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81
EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001
ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286
CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: fffe0ff0 DR7: 00000400
Call Trace:
execlists_context_alloc+0x10/0x20 [i915]
intel_context_alloc_state+0x3f/0x70 [i915]
__intel_context_do_pin+0x117/0x170 [i915]
i915_gem_do_execbuffer+0xcc7/0x2500 [i915]
i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915]
drm_ioctl_kernel+0x8f/0xd0
drm_ioctl+0x223/0x3d0
__ia32_sys_ioctl+0x1ab/0x760
__do_fast_syscall_32+0x3f/0x70
do_fast_syscall_32+0x29/0x60
do_SYSENTER_32+0x15/0x20
entry_SYSENTER_32+0x9f/0xf2
EIP: 0xb7f28559
Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76
EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c
ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8
DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296
Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan
CR2: 00000000fe036000
It looks like kasan, xen and i915 are vulnerable.
Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking
after 30-or-so minutes, and machine is unusable"
[sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h]
Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au
[chris@chris-wilson.co.uk: changelog addition]
[pavel@ucw.cz: changelog addition]
Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified")
Fixes: 86cf69f1d893 ("x86/mm/32: implement arch_sync_kernel_mappings()")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32]
Tested-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org> [5.8+]
Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
IA64 isn't really being maintained, so mark it as Odd Fixes only.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/7e719139-450f-52c2-59a2-7964a34eda1f@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Nominate Nathan and myself to be point of contact for clang/LLVM related
support, after a poll at the LLVM BoF at Linux Plumbers Conf 2020.
While corporate sponsorship is beneficial, its important to not entrust
the keys to the nukes with any one entity. Should Nathan and I find
ourselves at the same employer, I would gladly step down.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lkml.kernel.org/r/20200825143540.2948637-1-ndesaulniers@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I am leaving Marvell and already do not have access to my @marvell.com
email address. So switching over to my korg mail address or removing my
address there another maintainer is already listed. For the entries
there no other maintainer is listed I will keep looking into patches for
Cavium systems for a while until someone from Marvell takes it over.
Since I might have limited access to hardware and also limited time I
changed state to 'Odd Fixes' for those entries.
Signed-off-by: Robert Richter <rric@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ganapatrao Kulkarni <gkulkarni@marvell.com>
Cc: Sunil Goutham <sgoutham@marvell.com>
CC: Borislav Petkov <bp@alien8.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Wolfram Sang <wsa@kernel.org>,
Link: https://lkml.kernel.org/r/20200824122050.31164-1-rric@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 52f23478081ae0 ("mm/slub.c: fix corrupted freechain in
deactivate_slab()") suffered an update when picked up from LKML [1].
Specifically, relocating 'freelist = NULL' into 'freelist_corrupted()'
created a no-op statement. Fix it by sticking to the behavior intended
in the original patch [1]. In addition, make freelist_corrupted()
immune to passing NULL instead of &freelist.
The issue has been spotted via static analysis and code review.
[1] https://lore.kernel.org/linux-mm/20200331031450.12182-1-dongli.zhang@oracle.com/
Fixes: 52f23478081ae0 ("mm/slub.c: fix corrupted freechain in deactivate_slab()")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200824130643.10291-1-erosca@de.adit-jv.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We've met softlockup with "CONFIG_PREEMPT_NONE=y", when the target memcg
doesn't have any reclaimable memory.
It can be easily reproduced as below:
watchdog: BUG: soft lockup - CPU#0 stuck for 111s![memcg_test:2204]
CPU: 0 PID: 2204 Comm: memcg_test Not tainted 5.9.0-rc2+ #12
Call Trace:
shrink_lruvec+0x49f/0x640
shrink_node+0x2a6/0x6f0
do_try_to_free_pages+0xe9/0x3e0
try_to_free_mem_cgroup_pages+0xef/0x1f0
try_charge+0x2c1/0x750
mem_cgroup_charge+0xd7/0x240
__add_to_page_cache_locked+0x2fd/0x370
add_to_page_cache_lru+0x4a/0xc0
pagecache_get_page+0x10b/0x2f0
filemap_fault+0x661/0xad0
ext4_filemap_fault+0x2c/0x40
__do_fault+0x4d/0xf9
handle_mm_fault+0x1080/0x1790
It only happens on our 1-vcpu instances, because there's no chance for
oom reaper to run to reclaim the to-be-killed process.
Add a cond_resched() at the upper shrink_node_memcgs() to solve this
issue, this will mean that we will get a scheduling point for each memcg
in the reclaimed hierarchy without any dependency on the reclaimable
memory in that memcg thus making it more predictable.
Suggested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: http://lkml.kernel.org/r/1598495549-67324-1-git-send-email-xlpang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
syzbot has reported an use-after-free in the uncharge_batch path
BUG: KASAN: use-after-free in instrument_atomic_write include/linux/instrumented.h:71 [inline]
BUG: KASAN: use-after-free in atomic64_sub_return include/asm-generic/atomic-instrumented.h:970 [inline]
BUG: KASAN: use-after-free in atomic_long_sub_return include/asm-generic/atomic-long.h:113 [inline]
BUG: KASAN: use-after-free in page_counter_cancel mm/page_counter.c:54 [inline]
BUG: KASAN: use-after-free in page_counter_uncharge+0x3d/0xc0 mm/page_counter.c:155
Write of size 8 at addr ffff8880371c0148 by task syz-executor.0/9304
CPU: 0 PID: 9304 Comm: syz-executor.0 Not tainted 5.8.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1f0/0x31e lib/dump_stack.c:118
print_address_description+0x66/0x620 mm/kasan/report.c:383
__kasan_report mm/kasan/report.c:513 [inline]
kasan_report+0x132/0x1d0 mm/kasan/report.c:530
check_memory_region_inline mm/kasan/generic.c:183 [inline]
check_memory_region+0x2b5/0x2f0 mm/kasan/generic.c:192
instrument_atomic_write include/linux/instrumented.h:71 [inline]
atomic64_sub_return include/asm-generic/atomic-instrumented.h:970 [inline]
atomic_long_sub_return include/asm-generic/atomic-long.h:113 [inline]
page_counter_cancel mm/page_counter.c:54 [inline]
page_counter_uncharge+0x3d/0xc0 mm/page_counter.c:155
uncharge_batch+0x6c/0x350 mm/memcontrol.c:6764
uncharge_page+0x115/0x430 mm/memcontrol.c:6796
uncharge_list mm/memcontrol.c:6835 [inline]
mem_cgroup_uncharge_list+0x70/0xe0 mm/memcontrol.c:6877
release_pages+0x13a2/0x1550 mm/swap.c:911
tlb_batch_pages_flush mm/mmu_gather.c:49 [inline]
tlb_flush_mmu_free mm/mmu_gather.c:242 [inline]
tlb_flush_mmu+0x780/0x910 mm/mmu_gather.c:249
tlb_finish_mmu+0xcb/0x200 mm/mmu_gather.c:328
exit_mmap+0x296/0x550 mm/mmap.c:3185
__mmput+0x113/0x370 kernel/fork.c:1076
exit_mm+0x4cd/0x550 kernel/exit.c:483
do_exit+0x576/0x1f20 kernel/exit.c:793
do_group_exit+0x161/0x2d0 kernel/exit.c:903
get_signal+0x139b/0x1d30 kernel/signal.c:2743
arch_do_signal+0x33/0x610 arch/x86/kernel/signal.c:811
exit_to_user_mode_loop kernel/entry/common.c:135 [inline]
exit_to_user_mode_prepare+0x8d/0x1b0 kernel/entry/common.c:166
syscall_exit_to_user_mode+0x5e/0x1a0 kernel/entry/common.c:241
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Commit 1a3e1f40962c ("mm: memcontrol: decouple reference counting from
page accounting") reworked the memcg lifetime to be bound the the struct
page rather than charges. It also removed the css_put_many from
uncharge_batch and that is causing the above splat.
uncharge_batch() is supposed to uncharge accumulated charges for all
pages freed from the same memcg. The queuing is done by uncharge_page
which however drops the memcg reference after it adds charges to the
batch. If the current page happens to be the last one holding the
reference for its memcg then the memcg is OK to go and the next page to
be freed will trigger batched uncharge which needs to access the memcg
which is gone already.
Fix the issue by taking a reference for the memcg in the current batch.
Fixes: 1a3e1f40962c ("mm: memcontrol: decouple reference counting from page accounting")
Reported-by: syzbot+b305848212deec86eabe@syzkaller.appspotmail.com
Reported-by: syzbot+b5ea6fb6f139c8b9482b@syzkaller.appspotmail.com
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Hugh Dickins <hughd@google.com>
Link: https://lkml.kernel.org/r/20200820090341.GC5033@dhcp22.suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When running in a dax mode, if the user maps a page with MAP_PRIVATE and
PROT_WRITE, the xfs filesystem would incorrectly update ctime and mtime
when the user hits a COW fault.
This breaks building of the Linux kernel. How to reproduce:
1. extract the Linux kernel tree on dax-mounted xfs filesystem
2. run make clean
3. run make -j12
4. run make -j12
at step 4, make would incorrectly rebuild the whole kernel (although it
was already built in step 3).
The reason for the breakage is that almost all object files depend on
objtool. When we run objtool, it takes COW page fault on its .data
section, and these faults will incorrectly update the timestamp of the
objtool binary. The updated timestamp causes make to rebuild the whole
tree.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When running in a dax mode, if the user maps a page with MAP_PRIVATE and
PROT_WRITE, the ext2 filesystem would incorrectly update ctime and mtime
when the user hits a COW fault.
This breaks building of the Linux kernel. How to reproduce:
1. extract the Linux kernel tree on dax-mounted ext2 filesystem
2. run make clean
3. run make -j12
4. run make -j12
at step 4, make would incorrectly rebuild the whole kernel (although it
was already built in step 3).
The reason for the breakage is that almost all object files depend on
objtool. When we run objtool, it takes COW page fault on its .data
section, and these faults will incorrectly update the timestamp of the
objtool binary. The updated timestamp causes make to rebuild the whole
tree.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Using tp_reserve to calculate netoff can overflow as
tp_reserve is unsigned int and netoff is unsigned short.
This may lead to macoff receving a smaller value then
sizeof(struct virtio_net_hdr), and if po->has_vnet_hdr
is set, an out-of-bounds write will occur when
calling virtio_net_hdr_from_skb.
The bug is fixed by converting netoff to unsigned int
and checking if it exceeds USHRT_MAX.
This addresses CVE-2020-14386
Fixes: 8913336a7e8d ("packet: add PACKET_RESERVE sockopt")
Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This accounts for wp_page_reuse() case, where we reused a page for COW.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With the more strict (but greatly simplified) page reuse logic in
do_wp_page(), we can safely go back to the world where cow is not
enforced with writes.
This essentially reverts commit 17839856fd58 ("gup: document and work
around 'COW can break either way' issue"). There are some context
differences due to some changes later on around it:
2170ecfa7688 ("drm/i915: convert get_user_pages() --> pin_user_pages()", 2020-06-03)
376a34efa4ee ("mm/gup: refactor and de-duplicate gup_fast() code", 2020-06-03)
Some lines moved back and forth with those, but this revert patch should
have striped out and covered all the enforced cow bits anyways.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove the function as the last reference has gone away with the do_wp_page()
changes.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
How about we just make sure we're the only possible valid user fo the
page before we bother to reuse it?
Simplify, simplify, simplify.
And get rid of the nasty serialization on the page lock at the same time.
[peterx: add subject prefix]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
GCOV built with GCC 10 doesn't initialize n_function variable. This
produces different kernel panics as was seen by Colin in Ubuntu and me
in FC 32.
As a workaround, let's disable GCOV build for broken GCC 10 version.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891288
Link: https://lore.kernel.org/lkml/20200827133932.3338519-1-leon@kernel.org
Link: https://lore.kernel.org/lkml/CAHk-=whbijeSdSvx-Xcr0DPMj0BiwhJ+uiNnDSVZcr_h_kg7UA@mail.gmail.com/
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
init_stat() returns 0 on success, same as vfs_lstat(). When it replaced
vfs_lstat(), the '!' was dropped.
Fixes: 716308a5331b ("init: add an init_stat helper")
Signed-off-by: Barret Rhoden <brho@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The user-after-free bug in thermal_zone_device_unregister() is reported by
KASAN. It happens because struct thermal_zone_device is released during of
device_unregister() invocation, and hence the "tz" variable shouldn't be
touched by thermal_notify_tz_delete(tz->id).
Fixes: 55cdf0a283b8 ("thermal: core: Add notifications call in the framework")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200817235854.26816-1-digetx@gmail.com
|
|
Currently driver is suppressing the negative temperature
readings from the vadc. Consumers of the thermal zones need
to read the negative temperature too. Don't suppress the
readings.
Fixes: c610afaa21d3c6e ("thermal: Add QPNP PMIC temperature alarm driver")
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/944856eb819081268fab783236a916257de120e4.1596040416.git.gurus@codeaurora.org
|
|
We can sometimes get bogus thermal shutdowns on omap4430 at least with
droid4 running idle with a battery charger connected:
thermal thermal_zone0: critical temperature reached (143 C), shutting down
Dumping out the register values shows we can occasionally get a 0x7f value
that is outside the TRM listed values in the ADC conversion table. And then
we get a normal value when reading again after that. Reading the register
multiple times does not seem help avoiding the bogus values as they stay
until the next sample is ready.
Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we
should have values from 13 to 107 listed with a total of 95 values. But
looking at the omap4430_adc_to_temp array, the values are off, and the
end values are missing. And it seems that the 4430 ADC table is similar
to omap3630 rather than omap4460.
Let's fix the issue by using values based on the omap3630 table and just
ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has
the missing values added while the TRM table only shows every second
value.
Note that sometimes the ADC register values within the valid table can
also be way off for about 1 out of 10 values. But it seems that those
just show about 25 C too low values rather than too high values. So those
do not cause a bogus thermal shutdown.
Fixes: 1a31270e54d7 ("staging: omap-thermal: add OMAP4 data structures")
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.com
|
|
To be used in order to create foreign mappings. This is based on the
ZONE_DEVICE facility which is used by persistent memory devices in
order to create struct pages and kernel virtual mappings for the IOMEM
areas of such devices. Note that on kernels without support for
ZONE_DEVICE Xen will fallback to use ballooned pages in order to
create foreign mappings.
The newly added helpers use the same parameters as the existing
{alloc/free}_xenballooned_pages functions, which allows for in-place
replacement of the callers. Once a memory region has been added to be
used as scratch mapping space it will no longer be released, and pages
returned are kept in a linked list. This allows to have a buffer of
pages and prevents resorting to frequent additions and removals of
regions.
If enabled (because ZONE_DEVICE is supported) the usage of the new
functionality untangles Xen balloon and RAM hotplug from the usage of
unpopulated physical memory ranges to map foreign pages, which is the
correct thing to do in order to avoid mappings of foreign pages depend
on memory hotplug.
Note the driver is currently not enabled on Arm platforms because it
would interfere with the identity mapping required on some platforms.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200901083326.21264-4-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This is in preparation for the logic behind MEMORY_DEVICE_DEVDAX also
being used by non DAX devices.
No functional change intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: https://lore.kernel.org/r/20200901083326.21264-3-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In order to protect against the header being included multiple times
on the same compilation unit.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200901083326.21264-2-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The existing code accepted process_vm_readv() success or failure as long
as it didn't return garbage. This is too weak: if the vsyscall page is
readable, then process_vm_readv() should succeed and, if the page is not
readable, then it should fail.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Gate pages were missed when converting from get to pin_user_pages().
This can lead to refcount imbalances. This is reliably and quickly
reproducible running the x86 selftests when vsyscall=emulate is enabled
(the default). Fix by using try_grab_page() with appropriate flags
passed.
The long story:
Today, pin_user_pages() and get_user_pages() are similar interfaces for
manipulating page reference counts. However, "pins" use a "bias" value
and manipulate the actual reference count by 1024 instead of 1 used by
plain "gets".
That means that pin_user_pages() must be matched with unpin_user_pages()
and can't be mixed with a plain put_user_pages() or put_page().
Enter gate pages, like the vsyscall page. They are pages usually in the
kernel image, but which are mapped to userspace. Userspace is allowed
access to them, including interfaces using get/pin_user_pages(). The
refcount of these kernel pages is manipulated just like a normal user
page on the get/pin side so that the put/unpin side can work the same
for normal user pages or gate pages.
get_gate_page() uses try_get_page() which only bumps the refcount by
1, not 1024, even if called in the pin_user_pages() path. If someone
pins a gate page, this happens:
pin_user_pages()
get_gate_page()
try_get_page() // bump refcount +1
... some time later
unpin_user_pages()
page_ref_sub_and_test(page, 1024))
... and boom, we get a refcount off by 1023. This is reliably and
quickly reproducible running the x86 selftests when booted with
vsyscall=emulate (the default). The selftests use ptrace(), but I
suspect anything using pin_user_pages() on gate pages could hit this.
To fix it, simply use try_grab_page() instead of try_get_page(), and
pass 'gup_flags' in so that FOLL_PIN can be respected.
This bug traces back to the very beginning of the FOLL_PIN support in
commit 3faa52c03f44 ("mm/gup: track FOLL_PIN pages"), which showed up in
the 5.7 release.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: 3faa52c03f44 ("mm/gup: track FOLL_PIN pages")
Reported-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When an ISM device is removed, all its linkgroups are terminated,
i.e. all the corresponding connections are killed.
Connection killing invokes smc_close_active_abort(), which decreases
the sock refcount for certain states to simulate passive closing.
And it cancels the close worker and has to give up the sock lock for
this timeframe. This opens the door for a passive close worker or a
socket close to run in between. In this case smc_close_active_abort() and
passive close worker resp. smc_release() might do a sock_put for passive
closing. This causes:
[ 1323.315943] refcount_t: underflow; use-after-free.
[ 1323.316055] WARNING: CPU: 3 PID: 54469 at lib/refcount.c:28 refcount_warn_saturate+0xe8/0x130
[ 1323.316069] Kernel panic - not syncing: panic_on_warn set ...
[ 1323.316084] CPU: 3 PID: 54469 Comm: uperf Not tainted 5.9.0-20200826.rc2.git0.46328853ed20.300.fc32.s390x+debug #1
[ 1323.316096] Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0)
[ 1323.316108] Call Trace:
[ 1323.316125] [<00000000c0d4aae8>] show_stack+0x90/0xf8
[ 1323.316143] [<00000000c15989b0>] dump_stack+0xa8/0xe8
[ 1323.316158] [<00000000c0d8344e>] panic+0x11e/0x288
[ 1323.316173] [<00000000c0d83144>] __warn+0xac/0x158
[ 1323.316187] [<00000000c1597a7a>] report_bug+0xb2/0x130
[ 1323.316201] [<00000000c0d36424>] monitor_event_exception+0x44/0xc0
[ 1323.316219] [<00000000c195c716>] pgm_check_handler+0x1da/0x238
[ 1323.316234] [<00000000c151844c>] refcount_warn_saturate+0xec/0x130
[ 1323.316280] ([<00000000c1518448>] refcount_warn_saturate+0xe8/0x130)
[ 1323.316310] [<000003ff801f2e2a>] smc_release+0x192/0x1c8 [smc]
[ 1323.316323] [<00000000c169f1fa>] __sock_release+0x5a/0xe0
[ 1323.316334] [<00000000c169f2ac>] sock_close+0x2c/0x40
[ 1323.316350] [<00000000c1086de0>] __fput+0xb8/0x278
[ 1323.316362] [<00000000c0db1e0e>] task_work_run+0x76/0xb8
[ 1323.316393] [<00000000c0d8ab84>] do_exit+0x26c/0x520
[ 1323.316408] [<00000000c0d8af08>] do_group_exit+0x48/0xc0
[ 1323.316421] [<00000000c0d8afa8>] __s390x_sys_exit_group+0x28/0x38
[ 1323.316433] [<00000000c195c32c>] system_call+0xe0/0x2b4
[ 1323.316446] 1 lock held by uperf/54469:
[ 1323.316456] #0: 0000000044125e60 (&sb->s_type->i_mutex_key#9){+.+.}-{3:3}, at: __sock_release+0x44/0xe0
The patch rechecks sock state in smc_close_active_abort() after
smc_close_cancel_work() to avoid duplicate decrease of sock
refcount for the same purpose.
Fixes: 611b63a12732 ("net/smc: cancel tx worker in case of socket aborts")
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When an SMC connection is created, and there is a problem to
create an RMB or DMB, the previously created send buffer is
thrown away as well including buffer descriptor freeing.
Make sure the connection no longer references the freed
buffer descriptor, otherwise bugs like this are possible:
[71556.835148] =============================================================================
[71556.835168] BUG kmalloc-128 (Tainted: G B OE ): Poison overwritten
[71556.835172] -----------------------------------------------------------------------------
[71556.835179] INFO: 0x00000000d20894be-0x00000000aaef63e9 @offset=2724. First byte 0x0 instead of 0x6b
[71556.835215] INFO: Allocated in __smc_buf_create+0x184/0x578 [smc] age=0 cpu=5 pid=46726
[71556.835234] ___slab_alloc+0x5a4/0x690
[71556.835239] __slab_alloc.constprop.0+0x70/0xb0
[71556.835243] kmem_cache_alloc_trace+0x38e/0x3f8
[71556.835250] __smc_buf_create+0x184/0x578 [smc]
[71556.835257] smc_buf_create+0x2e/0xe8 [smc]
[71556.835264] smc_listen_work+0x516/0x6a0 [smc]
[71556.835275] process_one_work+0x280/0x478
[71556.835280] worker_thread+0x66/0x368
[71556.835287] kthread+0x17a/0x1a0
[71556.835294] ret_from_fork+0x28/0x2c
[71556.835301] INFO: Freed in smc_buf_create+0xd8/0xe8 [smc] age=0 cpu=5 pid=46726
[71556.835307] __slab_free+0x246/0x560
[71556.835311] kfree+0x398/0x3f8
[71556.835318] smc_buf_create+0xd8/0xe8 [smc]
[71556.835324] smc_listen_work+0x516/0x6a0 [smc]
[71556.835328] process_one_work+0x280/0x478
[71556.835332] worker_thread+0x66/0x368
[71556.835337] kthread+0x17a/0x1a0
[71556.835344] ret_from_fork+0x28/0x2c
[71556.835348] INFO: Slab 0x00000000a0744551 objects=51 used=51 fp=0x0000000000000000 flags=0x1ffff00000010200
[71556.835352] INFO: Object 0x00000000563480a1 @offset=2688 fp=0x00000000289567b2
[71556.835359] Redzone 000000006783cde2: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835363] Redzone 00000000e35b876e: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835367] Redzone 0000000023074562: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835372] Redzone 00000000b9564b8c: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835376] Redzone 00000000810c6362: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835380] Redzone 0000000065ef52c3: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835384] Redzone 00000000c5dd6984: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835388] Redzone 000000004c480f8f: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835392] Object 00000000563480a1: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[71556.835397] Object 000000009c479d06: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[71556.835401] Object 000000006e1dce92: 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b kkkk....kkkkkkkk
[71556.835405] Object 00000000227f7cf8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[71556.835410] Object 000000009a701215: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[71556.835414] Object 000000003731ce76: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[71556.835418] Object 00000000f7085967: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[71556.835422] Object 0000000007f99927: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk.
[71556.835427] Redzone 00000000579c4913: bb bb bb bb bb bb bb bb ........
[71556.835431] Padding 00000000305aef82: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
[71556.835435] Padding 00000000b1cdd722: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
[71556.835438] Padding 00000000c7568199: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
[71556.835442] Padding 00000000fad4c4d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
[71556.835451] CPU: 0 PID: 47939 Comm: kworker/0:15 Tainted: G B OE 5.9.0-rc1uschi+ #54
[71556.835456] Hardware name: IBM 3906 M03 703 (LPAR)
[71556.835464] Workqueue: events smc_listen_work [smc]
[71556.835470] Call Trace:
[71556.835478] [<00000000d5eaeb10>] show_stack+0x90/0xf8
[71556.835493] [<00000000d66fc0f8>] dump_stack+0xa8/0xe8
[71556.835499] [<00000000d61a511c>] check_bytes_and_report+0x104/0x130
[71556.835504] [<00000000d61a57b2>] check_object+0x26a/0x2e0
[71556.835509] [<00000000d61a59bc>] alloc_debug_processing+0x194/0x238
[71556.835514] [<00000000d61a8c14>] ___slab_alloc+0x5a4/0x690
[71556.835519] [<00000000d61a9170>] __slab_alloc.constprop.0+0x70/0xb0
[71556.835524] [<00000000d61aaf66>] kmem_cache_alloc_trace+0x38e/0x3f8
[71556.835530] [<000003ff80549bbc>] __smc_buf_create+0x184/0x578 [smc]
[71556.835538] [<000003ff8054a396>] smc_buf_create+0x2e/0xe8 [smc]
[71556.835545] [<000003ff80540c16>] smc_listen_work+0x516/0x6a0 [smc]
[71556.835549] [<00000000d5f0f448>] process_one_work+0x280/0x478
[71556.835554] [<00000000d5f0f6a6>] worker_thread+0x66/0x368
[71556.835559] [<00000000d5f18692>] kthread+0x17a/0x1a0
[71556.835563] [<00000000d6abf3b8>] ret_from_fork+0x28/0x2c
[71556.835569] INFO: lockdep is turned off.
[71556.835573] FIX kmalloc-128: Restoring 0x00000000d20894be-0x00000000aaef63e9=0x6b
[71556.835577] FIX kmalloc-128: Marking all objects used
Fixes: fd7f3a746582 ("net/smc: remove freed buffer from list")
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SMC tries to make use of SMCD first. If a problem shows up,
it tries to switch to SMCR. If the SMCD initializing problem shows
up after the SMCD connection has already been initialized, field
rx_off keeps the wrong SMCD value for SMCR, which results in corrupted
data at the receiver.
This patch adds an explicit (re-)setting of field rx_off to zero if the
connection uses SMCR.
Fixes: be244f28d22f ("net/smc: add SMC-D support in data transfer")
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Older SMCR implementations had no link failover support and used one
link only. Because the handshake protocol requires to try the
establishment of a second link the old code sent a fake add_link message
and declined any server response afterwards.
The current code supports multiple links and inspects the received fake
add_link message more closely. To tolerate the fake add_link messages
smc_llc_is_local_add_link() needs an improved check of the message to
be able to separate between locally enqueued and fake add_link messages.
And smc_llc_cli_add_link() needs to check if the provided qp_mtu size is
invalid and reject the add_link request in that case.
Fixes: c48254fa48e5 ("net/smc: move add link processing for new device into llc layer")
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If tg3_reset_task() fails, the device state is left in an inconsistent
state with IFF_RUNNING still set but NAPI state not enabled. A
subsequent operation, such as ifdown or AER error can cause it to
soft lock up when it tries to disable NAPI state.
Fix it by bringing down the device to !IFF_RUNNING state when
tg3_reset_task() fails. tg3_reset_task() running from workqueue
will now call tg3_close() when the reset fails. We need to
modify tg3_reset_task_cancel() slightly to avoid tg3_close()
calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise
cancel_work_sync() will wait forever for tg3_reset_task() to
finish.
Reported-by: David Christensen <drc@linux.vnet.ibm.com>
Reported-by: Baptiste Covolato <baptiste@arista.com>
Fixes: db2199737990 ("tg3: Schedule at most one tg3_reset_task run")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When validating kcore modules the do_validate_kcore_modules function
checks on every kernel module dso against modules record. The
__map__is_kmodule check is used to get only kernel module dso objects
through.
Currently the bpf images are slipping through the check and making the
validation to fail, so report falls back from kcore usage to kallsyms.
Adding __map__is_bpf_image check for bpf image and adding it to
__map__is_kmodule check.
Fixes: 3c29d4483e85 ("perf annotate: Add basic support for bpf_image")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200826213017.818788-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Event modifiers are not mentioned in the perf record or perf stat
manpages. Add them to orient new users more effectively by pointing
them to the perf list manpage for details.
Fixes: 2055fdaf8703 ("perf list: Document precise event sampling for AMD IBS")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tony Jones <tonyj@suse.de>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200901215853.276234-1-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In case of error, the function perf_session__new() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR()
Committer notes:
This wasn't compiling due to an extraneous '{' not matched by a '}', fix
it.
Fixes: 13edc237200c ("perf bench: Add a multi-threaded synthesize benchmark")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200902140526.26916-1-yuehaibing@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There's a risk that outputting interval mode summaries by default breaks
CSV consumers. It already broke pmu-tools/toplev.
So now we turn off the summary by default but we create a new option
'--summary' to enable the summary. This is active even when not using
CSV mode.
Before:
root@kbl-ppc:~# perf stat -I1000 --interval-count 2
# time counts unit events
1.000265904 8,005.73 msec cpu-clock # 8.006 CPUs utilized
1.000265904 601 context-switches # 0.075 K/sec
1.000265904 10 cpu-migrations # 0.001 K/sec
1.000265904 0 page-faults # 0.000 K/sec
1.000265904 66,746,521 cycles # 0.008 GHz
1.000265904 71,874,398 instructions # 1.08 insn per cycle
1.000265904 13,356,781 branches # 1.668 M/sec
1.000265904 298,756 branch-misses # 2.24% of all branches
2.001857667 8,012.52 msec cpu-clock # 8.013 CPUs utilized
2.001857667 164 context-switches # 0.020 K/sec
2.001857667 10 cpu-migrations # 0.001 K/sec
2.001857667 2 page-faults # 0.000 K/sec
2.001857667 5,822,188 cycles # 0.001 GHz
2.001857667 2,186,170 instructions # 0.38 insn per cycle
2.001857667 442,378 branches # 0.055 M/sec
2.001857667 44,750 branch-misses # 10.12% of all branches
Performance counter stats for 'system wide':
16,018.25 msec cpu-clock # 7.993 CPUs utilized
765 context-switches # 0.048 K/sec
20 cpu-migrations # 0.001 K/sec
2 page-faults # 0.000 K/sec
72,568,709 cycles # 0.005 GHz
74,060,568 instructions # 1.02 insn per cycle
13,799,159 branches # 0.861 M/sec
343,506 branch-misses # 2.49% of all branches
2.004118489 seconds time elapsed
After:
root@kbl-ppc:~# perf stat -I1000 --interval-count 2
# time counts unit events
1.001336393 8,013.28 msec cpu-clock # 8.013 CPUs utilized
1.001336393 82 context-switches # 0.010 K/sec
1.001336393 8 cpu-migrations # 0.001 K/sec
1.001336393 0 page-faults # 0.000 K/sec
1.001336393 4,199,121 cycles # 0.001 GHz
1.001336393 1,373,991 instructions # 0.33 insn per cycle
1.001336393 270,681 branches # 0.034 M/sec
1.001336393 31,659 branch-misses # 11.70% of all branches
2.003905006 8,020.52 msec cpu-clock # 8.021 CPUs utilized
2.003905006 184 context-switches # 0.023 K/sec
2.003905006 8 cpu-migrations # 0.001 K/sec
2.003905006 2 page-faults # 0.000 K/sec
2.003905006 5,446,190 cycles # 0.001 GHz
2.003905006 2,312,547 instructions # 0.42 insn per cycle
2.003905006 451,691 branches # 0.056 M/sec
2.003905006 37,925 branch-misses # 8.40% of all branches
root@kbl-ppc:~# perf stat -I1000 --interval-count 2 --summary
# time counts unit events
1.001313128 8,013.20 msec cpu-clock # 8.013 CPUs utilized
1.001313128 83 context-switches # 0.010 K/sec
1.001313128 8 cpu-migrations # 0.001 K/sec
1.001313128 0 page-faults # 0.000 K/sec
1.001313128 4,470,950 cycles # 0.001 GHz
1.001313128 1,440,045 instructions # 0.32 insn per cycle
1.001313128 283,222 branches # 0.035 M/sec
1.001313128 33,576 branch-misses # 11.86% of all branches
2.003857385 8,020.34 msec cpu-clock # 8.020 CPUs utilized
2.003857385 154 context-switches # 0.019 K/sec
2.003857385 8 cpu-migrations # 0.001 K/sec
2.003857385 2 page-faults # 0.000 K/sec
2.003857385 4,515,676 cycles # 0.001 GHz
2.003857385 2,180,449 instructions # 0.48 insn per cycle
2.003857385 435,254 branches # 0.054 M/sec
2.003857385 31,179 branch-misses # 7.16% of all branches
Performance counter stats for 'system wide':
16,033.53 msec cpu-clock # 7.992 CPUs utilized
237 context-switches # 0.015 K/sec
16 cpu-migrations # 0.001 K/sec
2 page-faults # 0.000 K/sec
8,986,626 cycles # 0.001 GHz
3,620,494 instructions # 0.40 insn per cycle
718,476 branches # 0.045 M/sec
64,755 branch-misses # 9.01% of all branches
2.006124542 seconds time elapsed
Fixes: c7e5b328a8d4 ("perf stat: Report summary for interval mode")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200903010113.32232-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fixed a compilation warning for casting to pointer from integer of
different size on 32-bit platforms.
Reported-by: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The new string should have enough space for the original string and the
back slashes IMHO.
Fixes: fbc2844e84038ce3 ("perf vendor events: Use more flexible pattern matching for CPU identification for mapfile.csv")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lore.kernel.org/lkml/20200903152510.489233-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To address these errors found when cross building from x86_64 to MIPS
little endian 32-bit:
CC /tmp/build/perf/util/parse-events-bison.o
util/parse-events.y: In function 'parse_events_parse':
util/parse-events.y:514:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
514 | (void *) $2, $6, $4);
| ^
util/parse-events.y:531:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
531 | (void *) $2, NULL, $4)) {
| ^
util/parse-events.y:547:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
547 | (void *) $2, $4, 0);
| ^
util/parse-events.y:564:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
564 | (void *) $2, NULL, 0)) {
| ^
Fixes: cabbf26821aa210f ("perf parse: Before yyabort-ing free components")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In the "single port" example code for configuring a DSA switch without
tagging support from userspace the command to bring up the "lan2" link
was typo'd.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The realtime flag only applies to the data fork, so don't use the
realtime block number checks on the attr fork of a realtime file.
Fixes: 30b0984d9117 ("xfs: refactor bmap record validation")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
|
|
There've been quite a few regression reports about the lowered volume
(reduced to ca 65% from the previous level) on Lenovo Thinkpad X1
after the commit d2cd795c4ece ("ALSA: hda - fixup for the bass speaker
on Lenovo Carbon X1 7th gen"). Although the commit itself does the
right thing from HD-audio POV in order to have a volume control for
bass speakers, it seems that the machine has some secret recipe under
the hood.
Through experiments, Benjamin Poirier found out that the following
routing gives the best result:
* DAC1 (NID 0x02) -> Speaker pin (NID 0x14)
* DAC2 (NID 0x03) -> Shared by both Bass Speaker pin (NID 0x17) &
Headphone pin (0x21)
* DAC3 (NID 0x06) -> Unused
DAC1 seems to have some equalizer internally applied, and you'd get
again the output in a bad quality if you connect this to the
headphone pin. Hence the headphone is connected to DAC2, which is now
shared with the bass speaker pin. DAC3 has no volume amp, hence it's
not connected at all.
For achieving the routing above, this patch introduced a couple of
workarounds:
* The connection list of bass speaker pin (NID 0x17) is reduced not to
include DAC3 (NID 0x06)
* Pass preferred_pairs array to specify the fixed connection
Here, both workarounds are needed because the generic parser prefers
the individual DAC assignment over others.
When the routing above is applied, the generic parser creates the two
volume controls "Front" and "Bass Speaker". Since we have only two
DACs for three output pins, those are not fully controlling each
output individually, and it would confuse PulseAudio. For avoiding
the pitfall, in this patch, we rename those volume controls to some
unique ones ("DAC1" and "DAC2"). Then PulseAudio ignore them and
concentrate only on the still good-working "Master" volume control.
If a user still wants to control each DAC volume, they can still
change manually via "DAC1" and "DAC2" volume controls.
Fixes: d2cd795c4ece ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen")
Reported-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207407#c10
BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3214171
BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3276276
Link: https://lore/kernel.org/r/20200829112746.3118-1-benjamin.poirier@gmail.com
Link: https://lore.kernel.org/r/20200903083300.6333-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
David Howells
Muchun Song
Li Xinhai
Ralph Campbell
Alistair Popple
Yang Shi
Mrinal Pandey
Tobias Klauser
Joerg Roedel
Randy Dunlap
Nick Desaulniers
Robert Richter
Eugeniu Rosca
Xunlei Pang
Michal Hocko
Mikulas Patocka
Or Cohen
Peter Xu
Linus Torvalds
Leon Romanovsky
Barret Rhoden
Dmitry Osipenko
Veera Vegivada
Tony Lindgren
Roger Pau Monne
Andy Lutomirski
Dave Hansen
Ursula Braun
Karsten Graul
Michael Chan
Jiri Olsa
Kim Phillips
YueHaibing
Jin Yao
Tzvetomir Stoyanov (VMware)
Namhyung Kim
Arnaldo Carvalho de Melo
Paul Barker
Darrick J. Wong
Takashi Iwai