| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When __mmc_blk_ioctl_cmd() calls card_busy_detect() to verify that the
card's states moves back into transfer state, the polling with CMD13 is
done without any delays in between the commands being sent.
Rather than fixing card_busy_detect() in this regards, let's instead
convert into using the common mmc_poll_for_busy(), which also helps us to
avoid open-coding.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20210702134229.357717-3-ulf.hansson@linaro.org
|
|
When mmc_blk_fix_state() sends a CMD12 to try to move the card into the
transfer state, it calls card_busy_detect() to poll for the card's state
with CMD13. This is done without any delays in between the commands being
sent.
Rather than fixing card_busy_detect() in this regards, let's instead
convert into using the common mmc_poll_for_busy(), which also helps us to
avoid open-coding.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20210702134229.357717-2-ulf.hansson@linaro.org
|
|
This driver has had problems when handling data errors. Add fault
injection support so that the abort handling can be easily triggered and
regression-tested. A hrtimer is used to indicate a data CRC error at
various points during the data transfer.
Note that for the recent problem with hangs in the case of some data CRC
errors, a udelay(10) inserted at the start of send_stop_abort() greatly
helped in triggering the error, but I've not included this as part of
the fault injection support since it seemed too specific.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/20210701080534.23138-1-vincent.whitchurch@axis.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Infinite loops are hard to read and understand because of
hidden main loop condition. Simplify such one in mmc_spi_skip().
Using schedule() to schedule (and be friendly to others)
is discouraged and cond_resched() should be used instead.
Hence, replace schedule() with cond_resched() at the same
time.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210623101731.87885-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
If we find a reset handle when probing the MMCI block,
make sure the reset is de-asserted. It could happen that
a hardware has reset asserted at boot.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Yann Gautier <yann.gautier@foss.st.com>
Cc: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Yann Gautier <yann.gautier@foss.st.com>
Link: https://lore.kernel.org/r/20210630102408.3543024-1-linus.walleij@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
dmaengine_terminate_all() is deprecated in favor of explicitly saying if
it should be sync or async. Here, we want dmaengine_terminate_sync()
because there is no other synchronization code in the driver to handle
an async case.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210623095734.3046-4-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
dmaengine_terminate_all() is deprecated in favor of explicitly saying if
it should be sync or async. Here, we want dmaengine_terminate_sync()
because there is no other synchronization code in the driver to handle
an async case.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210623095734.3046-3-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
dmaengine_terminate_all() is deprecated in favor of explicitly saying if
it should be sync or async. Here, we want dmaengine_terminate_sync()
because there is no other synchronization code in the driver to handle
an async case.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210623095734.3046-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add sc7280 SoC specific compatible strings for qcom-sdhci controller.
Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1623835207-29462-1-git-send-email-sbhanu@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
'of_property_read_variable_u32_array' function returns number
of elements read on success. This patch updates the condition
check in the driver to overwrite the tap values from DT if exist.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1623753837-21035-8-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Modify the data type of the clk_phase array to u32 to make it compatible
with the argument requirement of "of_property_read_variable_u32_array".
Addresses-coverity: ("incompatible_param")
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1623753837-21035-7-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The division macro DIV_ROUND_CLOSEST takes int values as the argument.
However the code here uses unsigned int values for this, which is
causing the values comparison with 0 as always true. We can use
DIV_ROUND_CLOSEST_ULL instead for the same.
Addresses-coverity: ("result_independent_of_operands")
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1623753837-21035-6-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
At a couple of places, the return values of the non-void functions were
not getting checked. This was reported by the coverity tool. Modify the
code to check the return values of the same.
Addresses-Coverity: ("check_return")
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1623753837-21035-5-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
ZynqMP platform does not perform auto tuning in DDR50 mode. Skip the
same while the card is operating in DDR50 mode.
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1623753837-21035-4-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Arasan controller supports AUTO CMD12, this patch adds
"SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12" quirk to enable auto cmd12
feature.
By using auto cmd12 we can also avoid following error message
"Got data interrupt even though no data operation in progress"
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1623753837-21035-3-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
SD standard speed timing was met only at 19MHz and not 25 MHz, that's
why changing driver to 19MHz. The reason for this is when a level shifter
is used on the board, timing was met for standard speed only at 19MHz.
Since this level shifter is commonly required for high speed modes,
the driver is modified to use standard speed of 19Mhz.
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1623753837-21035-2-git-send-email-manish.narani@xilinx.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
We have this in two places, so let's have a dedicated function. It is
also more readable.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210624151616.38770-4-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
I wanted to use it in a wrong way, so document the intended way.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210624151616.38770-3-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
|
|
We've had CONFIG_MANDATORY_FILE_LOCKING since 2015 and a lot of distros
have disabled it. Warn the stragglers that still use "-o mand" that
we'll be dropping support for that mount option.
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
|
|
We currently check for ret != 0 to indicate error, but '1' is a valid
return and just indicates that the allocation succeeded with a wrap.
Correct the check to be for < 0, like it was before the xarray
conversion.
Cc: stable@vger.kernel.org
Fixes: 61cf93700fe6 ("io_uring: Convert personality_idr to XArray")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
syzbot hit kernel BUG at fs/hugetlbfs/inode.c:532 as described in [1].
This BUG triggers if the HPageRestoreReserve flag is set on a page in
the page cache. It should never be set, as the routine
huge_add_to_page_cache explicitly clears the flag after adding a page to
the cache.
The only code other than huge page allocation which sets the flag is
restore_reserve_on_error. It will potentially set the flag in rare out
of memory conditions. syzbot was injecting errors to cause memory
allocation errors which exercised this specific path.
The code in restore_reserve_on_error is doing the right thing. However,
there are instances where pages in the page cache were being passed to
restore_reserve_on_error. This is incorrect, as once a page goes into
the cache reservation information will not be modified for the page
until it is removed from the cache. Error paths do not remove pages
from the cache, so even in the case of error, the page will remain in
the cache and no reservation adjustment is needed.
Modify routines that potentially call restore_reserve_on_error with a
page cache page to no longer do so.
Note on fixes tag: Prior to commit 846be08578ed ("mm/hugetlb: expand
restore_reserve_on_error functionality") the routine would not process
page cache pages because the HPageRestoreReserve flag is not set on such
pages. Therefore, this issue could not be trigggered. The code added
by commit 846be08578ed ("mm/hugetlb: expand restore_reserve_on_error
functionality") is needed and correct. It exposed incorrect calls to
restore_reserve_on_error which is the root cause addressed by this
commit.
[1] https://lore.kernel.org/linux-mm/00000000000050776d05c9b7c7f0@google.com/
Link: https://lkml.kernel.org/r/20210818213304.37038-1-mike.kravetz@oracle.com
Fixes: 846be08578ed ("mm/hugetlb: expand restore_reserve_on_error functionality")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: <syzbot+67654e51e54455f1c585@syzkaller.appspotmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Originally the addr != NULL check was meant to take care of the case
where __kfence_pool == NULL (KFENCE is disabled). However, this does
not work for addresses where addr > 0 && addr < KFENCE_POOL_SIZE.
This can be the case on NULL-deref where addr > 0 && addr < PAGE_SIZE or
any other faulting access with addr < KFENCE_POOL_SIZE. While the
kernel would likely crash, the stack traces and report might be
confusing due to double faults upon KFENCE's attempt to unprotect such
an address.
Fix it by just checking that __kfence_pool != NULL instead.
Link: https://lkml.kernel.org/r/20210818130300.2482437-1-elver@google.com
Fixes: 0ce20dd84089 ("mm: add Kernel Electric-Fence infrastructure")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org> [5.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In a debugging session the other day, Rik noticed that node_reclaim()
was missing memstall annotations. This means we'll miss pressure and
lost productivity resulting from reclaim on an overloaded local NUMA
node when vm.zone_reclaim_mode is enabled.
There haven't been any reports, but that's likely because
vm.zone_reclaim_mode hasn't been a commonly used feature recently, and
the intersection between such setups and psi users is probably nil.
But secondary memory such as CXL-connected DIMMS, persistent memory etc,
and the page demotion patches that handle them
(https://lore.kernel.org/lkml/20210401183216.443C4443@viggo.jf.intel.com/)
could soon make this a more common codepath again.
Link: https://lkml.kernel.org/r/20210818152457.35846-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
HWPoisonHandlable() sometimes returns false for typical user pages due
to races with average memory events like transfers over LRU lists. This
causes failures in hwpoison handling.
There's retry code for such a case but does not work because the retry
loop reaches the retry limit too quickly before the page settles down to
handlable state. Let get_any_page() call shake_page() to fix it.
[naoya.horiguchi@nec.com: get_any_page(): return -EIO when retry limit reached]
Link: https://lkml.kernel.org/r/20210819001958.2365157-1-naoya.horiguchi@linux.dev
Link: https://lkml.kernel.org/r/20210817053703.2267588-1-naoya.horiguchi@linux.dev
Fixes: 25182f05ffed ("mm,hwpoison: fix race with hugetlb page allocation")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org> [5.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We've noticed occasional OOM killing when memory.low settings are in
effect for cgroups. This is unexpected and undesirable as memory.low is
supposed to express non-OOMing memory priorities between cgroups.
The reason for this is proportional memory.low reclaim. When cgroups
are below their memory.low threshold, reclaim passes them over in the
first round, and then retries if it couldn't find pages anywhere else.
But when cgroups are slightly above their memory.low setting, page scan
force is scaled down and diminished in proportion to the overage, to the
point where it can cause reclaim to fail as well - only in that case we
currently don't retry, and instead trigger OOM.
To fix this, hook proportional reclaim into the same retry logic we have
in place for when cgroups are skipped entirely. This way if reclaim
fails and some cgroups were scanned with diminished pressure, we'll try
another full-force cycle before giving up and OOMing.
[akpm@linux-foundation.org: coding-style fixes]
Link: https://lkml.kernel.org/r/20210817180506.220056-1-hannes@cmpxchg.org
Fixes: 9783aa9917f8 ("mm, memcg: proportional memory.{low,min} reclaim")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Leon Yang <lnyng@fb.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org> [5.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Everyone has moved from Freenode to Libera so updated the channel entry
for MAINTAINERS.
Link: https://github.com/ClangBuiltLinux/linux/issues/1402
Link: https://lkml.kernel.org/r/20210818022339.3863058-1-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
printk("%pGg") outputs these two flags as hexadecimal number, rather
than as a string, e.g:
GFP_KERNEL|0x1800000
Fix this by adding missing names of __GFP_ZEROTAGS and
__GFP_SKIP_KASAN_POISON flags to __def_gfpflag_names.
Link: https://lkml.kernel.org/r/20210816133502.590-1-rppt@kernel.org
Fixes: 013bb59dbb7c ("arm64: mte: handle tags zeroing at page allocation time")
Fixes: c275c5c6d50a ("kasan: disable freed user page poisoning with HW tags")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When placing pages on a pcp list, migratetype values over
MIGRATE_PCPTYPES get added to the MIGRATE_MOVABLE pcp list.
However, the actual migratetype is preserved in the page and should
not be changed to MIGRATE_MOVABLE or the page may end up on the wrong
free_list.
The impact is that HIGHATOMIC or CMA pages getting bulk freed from the
PCP lists could potentially end up on the wrong buddy list. There are
various consequences but minimally NR_FREE_CMA_PAGES accounting could
get screwed up.
[mgorman@techsingularity.net: changelog update]
Link: https://lkml.kernel.org/r/20210811182917.2607994-1-opendmb@gmail.com
Fixes: df1acc856923 ("mm/page_alloc: avoid conflating IRQs disabled with zone->lock")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Due to the change about how block layer detects congestion the
justification of commit 8fd2e0b505d1 ("mm: swap: check if swap backing
device is congested or not") doesn't stand anymore, so the commit could
be just reverted in order to solve the race reported by commit
2efa33fc7f6e ("mm/shmem: fix shmem_swapin() race with swapoff"). The
fix was reverted by the previous patch.
Link: https://lkml.kernel.org/r/20210810202936.2672-3-shy828301@gmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Due to the change about how block layer detects congestion the
justification of commit 8fd2e0b505d1 ("mm: swap: check if swap backing
device is congested or not") doesn't stand anymore, so the commit could
be just reverted in order to solve the race reported by commit
2efa33fc7f6e ("mm/shmem: fix shmem_swapin() race with swapoff"), so the
fix commit could be just reverted as well.
And that fix is also kind of buggy as discussed by [1] and [2].
[1] https://lore.kernel.org/linux-mm/24187e5e-069-9f3f-cefe-39ac70783753@google.com/
[2] https://lore.kernel.org/linux-mm/e82380b9-3ad4-4a52-be50-6d45c7f2b5da@google.com/
Link: https://lkml.kernel.org/r/20210810202936.2672-2-shy828301@gmail.com
Signed-off-by: Yang Shi <shy828301@gmail.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Function init_resources() allocates a boot memory block to hold an array of
resources which it adds to iomem_resource. The array is filled in from its
end and the function then attempts to free any unused memory at the
beginning. The problem is that size of the unused memory is incorrectly
calculated and this can result in releasing memory which is in use by
active resources. Their data then gets corrupted later when the memory is
reused by a different part of the system.
Fix the size of the released memory to correctly match the number of unused
resource entries.
Fixes: ffe0e5261268 ("RISC-V: Improve init_resources()")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Nick Kossifidis <mick@ics.forth.gr>
Tested-by: Sunil V L <sunilvl@ventanamicro.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
When the schema fixups are applied to 'select' the result is a single
entry is required for a match, but that will never match as there should
be 2 entries. Also, a 'select' schema should have the widest possible
match, so use 'contains' which matches the compatible string(s) in any
position and not just the first position.
Fixes: 993dcfac64eb ("dt-bindings: riscv: sifive-l2-cache: convert bindings to json-schema")
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Currently dpaa2_switch_takedown has a funny name and does not do the
opposite of dpaa2_switch_init, which makes probing fail when we need to
handle an -EPROBE_DEFER.
A sketch of what dpaa2_switch_init does:
dpsw_open
dpaa2_switch_detect_features
dpsw_reset
for (i = 0; i < ethsw->sw_attr.num_ifs; i++) {
dpsw_if_disable
dpsw_if_set_stp
dpsw_vlan_remove_if_untagged
dpsw_if_set_tci
dpsw_vlan_remove_if
}
dpsw_vlan_remove
alloc_ordered_workqueue
dpsw_fdb_remove
dpaa2_switch_ctrl_if_setup
When dpaa2_switch_takedown is called from the error path of
dpaa2_switch_probe(), the control interface, enabled by
dpaa2_switch_ctrl_if_setup from dpaa2_switch_init, remains enabled,
because dpaa2_switch_takedown does not call
dpaa2_switch_ctrl_if_teardown.
Since dpaa2_switch_probe might fail due to EPROBE_DEFER of a PHY, this
means that a second probe of the driver will happen with the control
interface directly enabled.
This will trigger a second error:
[ 93.273528] fsl_dpaa2_switch dpsw.0: dpsw_ctrl_if_set_pools() failed
[ 93.281966] fsl_dpaa2_switch dpsw.0: fsl_mc_driver_probe failed: -13
[ 93.288323] fsl_dpaa2_switch: probe of dpsw.0 failed with error -13
Which if we investigate the /dev/dpaa2_mc_console log, we find out is
caused by:
[E, ctrl_if_set_pools:2211, DPMNG] ctrl_if must be disabled
So make dpaa2_switch_takedown do the opposite of dpaa2_switch_init (in
reasonable limits, no reason to change STP state, re-add VLANs etc), and
rename it to something more conventional, like dpaa2_switch_teardown.
Fixes: 613c0a5810b7 ("staging: dpaa2-switch: enable the control interface")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210819141755.1931423-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 9ea3e52c5bc8bb4a084938dc1e3160643438927a.
Cited commit added a check to make sure 'action' is not NULL, but
'action' is already dereferenced before the check, when calling
flow_offload_has_one_action().
Therefore, the check does not make any sense and results in a smatch
warning:
include/net/flow_offload.h:322 flow_action_mixed_hw_stats_check() warn:
variable dereferenced before check 'action' (see line 319)
Fix by reverting this commit.
Cc: gushengxian <gushengxian@yulong.com>
Fixes: 9ea3e52c5bc8 ("flow_offload: action should not be NULL when it is referenced")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20210819105842.1315705-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make changes to MAC address dependent on the response of PF.
Disallow changes to HW MAC address and MAC filter from untrusted
VF, thanks to that ping is not lost if VF tries to change MAC.
Add a new field in iavf_mac_filter, to indicate whether there
was response from PF for given filter. Based on this field pass
or discard the filter.
If untrusted VF tried to change it's address, it's not changed.
Still filter was changed, because of that ping couldn't go through.
Fixes: c5c922b3e09b ("iavf: fix MAC address setting for VFs when filter is rejected")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan G <Gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Without this patch, ATR does not work. Receive/transmit uses queue
selection based on SW DCB hashing method.
If traffic classes are not configured for PF, then use
netdev_pick_tx function for selecting queue for packet transmission.
Instead of calling i40e_swdcb_skb_tx_hash, call netdev_pick_tx,
which ensures that packet is transmitted/received from CPU that is
running the application.
Reproduction steps:
1. Load i40e driver
2. Map each MSI interrupt of i40e port for each CPU
3. Disable ntuple, enable ATR i.e.:
ethtool -K $interface ntuple off
ethtool --set-priv-flags $interface flow-director-atr
4. Run application that is generating traffic and is bound to a
single CPU, i.e.:
taskset -c 9 netperf -H 1.1.1.1 -t TCP_RR -l 10
5. Observe behavior:
Application's traffic should be restricted to the CPU provided in
taskset.
Fixes: 89ec1f0886c1 ("i40e: Fix queue-to-TC mapping on Tx")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit 2e6b836312a4 ("ASoC: intel: atom: Fix reference to PCM
buffer address") changed the reference of PCM buffer address to
substream->runtime->dma_addr as the buffer address may change
dynamically. However, I forgot that the dma_addr field is still not
set up for the CONTINUOUS buffer type (that this driver uses) yet in
5.14 and earlier kernels, and it resulted in garbage I/O. The problem
will be fixed in 5.15, but we need to address it quickly for now.
The fix is to deduce the address again from the DMA pointer with
virt_to_phys(), but from the right one, substream->runtime->dma_area.
Fixes: 2e6b836312a4 ("ASoC: intel: atom: Fix reference to PCM buffer address")
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/2048c6aa-2187-46bd-6772-36a4fb3c5aeb@redhat.com
Link: https://lore.kernel.org/r/20210819152945.8510-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The mic has lots of noises if mic boost is enabled. So disable mic boost
to get crystal clear audio capture.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210818144119.121738-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Two legacy PCI sysfs objects "legacy_io" and "legacy_mem" were updated
to use an unified address space in the commit 636b21b50152 ("PCI: Revoke
mappings like devmem"). This allows for revocations to be managed from
a single place when drivers want to take over and mmap() a /dev/mem
range.
Following the update, both of the sysfs objects should leverage the
iomem_get_mapping() function to get an appropriate address range, but
only the "legacy_io" has been correctly updated - the second attribute
seems to be using a wrong variable to pass the iomem_get_mapping()
function to.
Thus, correct the variable name used so that the "legacy_mem" sysfs
object would also correctly call the iomem_get_mapping() function.
Fixes: 636b21b50152 ("PCI: Revoke mappings like devmem")
Link: https://lore.kernel.org/r/20210812132144.791268-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The Renoir XHCI controller apparently doesn't resume reliably with the
standard D3hot-to-D0 delay. Increase it to 20ms.
[Alex: I talked to the AMD USB hardware team and the AMD Windows team and
they are not aware of any HW errata or specific issues. The HW works fine
in Windows. I was told Windows uses a rather generous default delay of
100ms for PCI state transitions.]
Link: https://lore.kernel.org/r/20210722025858.220064-1-alexander.deucher@amd.com
Signed-off-by: Marcin Bachry <hegel666@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Prike Liang <prike.liang@amd.com>
Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com>
|
|
Add Jim Quinlan, Nicolas Saenz Julienne, and Florian Fainelli as
maintainers of the Broadcom STB PCIe controller driver.
This driver is also included in these entries:
BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE
BROADCOM BCM7XXX ARM ARCHITECTURE
which cover the Raspberry Pi specifics of the PCIe driver.
Link: https://lore.kernel.org/r/20210818225031.8502-1-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The maximum PLA bp number of RTL8153C is 16, not 8. That is, the
bp 0 ~ 15 are at 0xfc28 ~ 0xfc46, and the bp_en is at 0xfc48.
Fixes: 195aae321c82 ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The register of USB_BP2_EN is 16 bits, so we should use
ocp_write_word(), not ocp_write_byte().
Fixes: 9370f2d05a2a ("support request_firmware for RTL8153")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If directly after an MP_CAPABLE 3WHS, the client receives an ADD_ADDR
with HMAC from the server, it is enough to switch to a "fully
established" mode because it has received more MPTCP options.
It was then OK to enable the "fully_established" flag on the MPTCP
socket. Still, best to check if the ADD_ADDR looks valid by looking if
it contains an HMAC (no 'echo' bit). If an ADD_ADDR echo is received
while we are not in "fully established" mode, it is strange and then
we should not switch to this mode now.
But that is not enough. On one hand, the path-manager has be notified
the state has changed. On the other hand, the "fully_established" flag
on the subflow socket should be turned on as well not to re-send the
MP_CAPABLE 3rd ACK content with the next ACK.
Fixes: 84dfe3677a6f ("mptcp: send out dedicated ADD_ADDR packet")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The endpoint cleanup path is prone to a memory leak, as reported
by syzkaller:
BUG: memory leak
unreferenced object 0xffff88810680ea00 (size 64):
comm "syz-executor.6", pid 6191, jiffies 4295756280 (age 24.138s)
hex dump (first 32 bytes):
58 75 7d 3c 80 88 ff ff 22 01 00 00 00 00 ad de Xu}<....".......
01 00 02 00 00 00 00 00 ac 1e 00 07 00 00 00 00 ................
backtrace:
[<0000000072a9f72a>] kmalloc include/linux/slab.h:591 [inline]
[<0000000072a9f72a>] mptcp_nl_cmd_add_addr+0x287/0x9f0 net/mptcp/pm_netlink.c:1170
[<00000000f6e931bf>] genl_family_rcv_msg_doit.isra.0+0x225/0x340 net/netlink/genetlink.c:731
[<00000000f1504a2c>] genl_family_rcv_msg net/netlink/genetlink.c:775 [inline]
[<00000000f1504a2c>] genl_rcv_msg+0x341/0x5b0 net/netlink/genetlink.c:792
[<0000000097e76f6a>] netlink_rcv_skb+0x148/0x430 net/netlink/af_netlink.c:2504
[<00000000ceefa2b8>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:803
[<000000008ff91aec>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
[<000000008ff91aec>] netlink_unicast+0x537/0x750 net/netlink/af_netlink.c:1340
[<0000000041682c35>] netlink_sendmsg+0x846/0xd80 net/netlink/af_netlink.c:1929
[<00000000df3aa8e7>] sock_sendmsg_nosec net/socket.c:704 [inline]
[<00000000df3aa8e7>] sock_sendmsg+0x14e/0x190 net/socket.c:724
[<000000002154c54c>] ____sys_sendmsg+0x709/0x870 net/socket.c:2403
[<000000001aab01d7>] ___sys_sendmsg+0xff/0x170 net/socket.c:2457
[<00000000fa3b1446>] __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486
[<00000000db2ee9c7>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<00000000db2ee9c7>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
[<000000005873517d>] entry_SYSCALL_64_after_hwframe+0x44/0xae
We should not require an allocation to cleanup stuff.
Rework the code a bit so that the additional RCU work is no more needed.
Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In __init_el2_timers we initialize CNTHCTL_EL2.{EL1PCEN,EL1PCTEN} with a
RMW sequence, leaving all other bits UNKNOWN.
In general, we should initialize all bits in a register rather than
using an RMW sequence, since most bits are UNKNOWN out of reset, and as
new bits are added to the reigster their reset value might not result in
expected behaviour.
In the case of CNTHCTL_EL2, FEAT_ECV added a number of new control bits
in previously RES0 bits, which reset to UNKNOWN values, and may cause
issues for EL1 and EL0:
* CNTHCTL_EL2.ECV enables the CNTPOFF_EL2 offset (which itself resets to
an UNKNOWN value) at EL0 and EL1. Since the offset could reset to
distinct values across CPUs, when the control bit resets to 1 this
could break timekeeping generally.
* CNTHCTL_EL2.{EL1TVT,EL1TVCT} trap EL0 and EL1 accesses to the EL1
virtual timer/counter registers to EL2. When reset to 1, this could
cause unexpected traps to EL2.
Initializing these bits to zero avoids these problems, and all other
bits in CNTHCTL_EL2 other than EL1PCEN and EL1PCTEN can safely be reset
to zero.
This patch ensures we initialize CNTHCTL_EL2 accordingly, only setting
EL1PCEN and EL1PCTEN, and setting all other bits to zero.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@google.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Oliver Upton <oupton@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210818161535.52786-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Laurent reported that STRICT_MODULE_RWX was causing intermittent crashes
on one of his systems:
kernel tried to execute exec-protected page (c008000004073278) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel instruction fetch
Faulting instruction address: 0xc008000004073278
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: drm virtio_console fuse drm_panel_orientation_quirks ...
CPU: 3 PID: 44 Comm: kworker/3:1 Not tainted 5.14.0-rc4+ #12
Workqueue: events control_work_handler [virtio_console]
NIP: c008000004073278 LR: c008000004073278 CTR: c0000000001e9de0
REGS: c00000002e4ef7e0 TRAP: 0400 Not tainted (5.14.0-rc4+)
MSR: 800000004280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 200400cf
...
NIP fill_queue+0xf0/0x210 [virtio_console]
LR fill_queue+0xf0/0x210 [virtio_console]
Call Trace:
fill_queue+0xb4/0x210 [virtio_console] (unreliable)
add_port+0x1a8/0x470 [virtio_console]
control_work_handler+0xbc/0x1e8 [virtio_console]
process_one_work+0x290/0x590
worker_thread+0x88/0x620
kthread+0x194/0x1a0
ret_from_kernel_thread+0x5c/0x64
Jordan, Fabiano & Murilo were able to reproduce and identify that the
problem is caused by the call to module_enable_ro() in do_init_module(),
which happens after the module's init function has already been called.
Our current implementation of change_page_attr() is not safe against
concurrent accesses, because it invalidates the PTE before flushing the
TLB and then installing the new PTE. That leaves a window in time where
there is no valid PTE for the page, if another CPU tries to access the
page at that time we see something like the fault above.
We can't simply switch to set_pte_at()/flush TLB, because our hash MMU
code doesn't handle a set_pte_at() of a valid PTE. See [1].
But we do have pte_update(), which replaces the old PTE with the new,
meaning there's no window where the PTE is invalid. And the hash MMU
version hash__pte_update() deals with synchronising the hash page table
correctly.
[1]: https://lore.kernel.org/linuxppc-dev/87y318wp9r.fsf@linux.ibm.com/
Fixes: 1f9ad21c3b38 ("powerpc/mm: Implement set_memory() routines")
Reported-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Murilo Opsfelder Araújo <muriloo@linux.ibm.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210818120518.3603172-1-mpe@ellerman.id.au
|
|
Commit b5efec00b671 ("powerpc/32s: Move KUEP locking/unlocking in C")
removed the 'isync' instruction after adding/removing NX bit in user
segments. The reasoning behind this change was that when setting the
NX bit we don't mind it taking effect with delay as the kernel never
executes text from userspace, and when clearing the NX bit this is
to return to userspace and then the 'rfi' should synchronise the
context.
However, it looks like on book3s/32 having a hash page table, at least
on the G3 processor, we get an unexpected fault from userspace, then
this is followed by something wrong in the verification of MSR_PR
at end of another interrupt.
This is fixed by adding back the removed isync() following update
of NX bit in user segment registers. Only do it for cores with an
hash table, as 603 cores don't exhibit that problem and the two isync
increase ./null_syscall selftest by 6 cycles on an MPC 832x.
First problem: unexpected WARN_ON() for mysterious PROTFAULT
WARNING: CPU: 0 PID: 1660 at arch/powerpc/mm/fault.c:354 do_page_fault+0x6c/0x5b0
Modules linked in:
CPU: 0 PID: 1660 Comm: Xorg Not tainted 5.13.0-pmac-00028-gb3c15b60339a #40
NIP: c001b5c8 LR: c001b6f8 CTR: 00000000
REGS: e2d09e40 TRAP: 0700 Not tainted (5.13.0-pmac-00028-gb3c15b60339a)
MSR: 00021032 <ME,IR,DR,RI> CR: 42d04f30 XER: 20000000
GPR00: c000424c e2d09f00 c301b680 e2d09f40 0000001e 42000000 00cba028 00000000
GPR08: 08000000 48000010 c301b680 e2d09f30 22d09f30 00c1fff0 00cba000 a7b7ba4c
GPR16: 00000031 00000000 00000000 00000000 00000000 00000000 a7b7b0d0 00c5c010
GPR24: a7b7b64c a7b7d2f0 00000004 00000000 c1efa6c0 00cba02c 00000300 e2d09f40
NIP [c001b5c8] do_page_fault+0x6c/0x5b0
LR [c001b6f8] do_page_fault+0x19c/0x5b0
Call Trace:
[e2d09f00] [e2d09f04] 0xe2d09f04 (unreliable)
[e2d09f30] [c000424c] DataAccess_virt+0xd4/0xe4
--- interrupt: 300 at 0xa7a261dc
NIP: a7a261dc LR: a7a253bc CTR: 00000000
REGS: e2d09f40 TRAP: 0300 Not tainted (5.13.0-pmac-00028-gb3c15b60339a)
MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 228428e2 XER: 20000000
DAR: 00cba02c DSISR: 42000000
GPR00: a7a27448 afa6b0e0 a74c35c0 a7b7b614 0000001e a7b7b614 00cba028 00000000
GPR08: 00020fd9 00000031 00cb9ff8 a7a273b0 220028e2 00c1fff0 00cba000 a7b7ba4c
GPR16: 00000031 00000000 00000000 00000000 00000000 00000000 a7b7b0d0 00c5c010
GPR24: a7b7b64c a7b7d2f0 00000004 00000002 0000001e a7b7b614 a7b7aff4 00000030
NIP [a7a261dc] 0xa7a261dc
LR [a7a253bc] 0xa7a253bc
--- interrupt: 300
Instruction dump:
7c4a1378 810300a0 75278410 83820298 83a300a4 553b018c 551e0036 4082038c
2e1b0000 40920228 75280800 41820220 <0fe00000> 3b600000 41920214 81420594
Second problem: MSR PR is seen unset allthough the interrupt frame shows it set
kernel BUG at arch/powerpc/kernel/interrupt.c:458!
Oops: Exception in kernel mode, sig: 5 [#1]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
Modules linked in:
CPU: 0 PID: 1660 Comm: Xorg Tainted: G W 5.13.0-pmac-00028-gb3c15b60339a #40
NIP: c0011434 LR: c001629c CTR: 00000000
REGS: e2d09e70 TRAP: 0700 Tainted: G W (5.13.0-pmac-00028-gb3c15b60339a)
MSR: 00029032 <EE,ME,IR,DR,RI> CR: 42d09f30 XER: 00000000
GPR00: 00000000 e2d09f30 c301b680 e2d09f40 83440000 c44d0e68 e2d09e8c 00000000
GPR08: 00000002 00dc228a 00004000 e2d09f30 22d09f30 00c1fff0 afa6ceb4 00c26144
GPR16: 00c25fb8 00c26140 afa6ceb8 90000000 00c944d8 0000001c 00000000 00200000
GPR24: 00000000 000001fb afa6d1b4 00000001 00000000 a539a2a0 a530fd80 00000089
NIP [c0011434] interrupt_exit_kernel_prepare+0x10/0x70
LR [c001629c] interrupt_return+0x9c/0x144
Call Trace:
[e2d09f30] [c000424c] DataAccess_virt+0xd4/0xe4 (unreliable)
--- interrupt: 300 at 0xa09be008
NIP: a09be008 LR: a09bdfe8 CTR: a09bdfc0
REGS: e2d09f40 TRAP: 0300 Tainted: G W (5.13.0-pmac-00028-gb3c15b60339a)
MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 420028e2 XER: 20000000
DAR: a539a308 DSISR: 0a000000
GPR00: a7b90d50 afa6b2d0 a74c35c0 a0a8b690 a0a8b698 a5365d70 a4fa82a8 00000004
GPR08: 00000000 a09bdfc0 00000000 a5360000 a09bde7c 00c1fff0 afa6ceb4 00c26144
GPR16: 00c25fb8 00c26140 afa6ceb8 90000000 00c944d8 0000001c 00000000 00200000
GPR24: 00000000 000001fb afa6d1b4 00000001 00000000 a539a2a0 a530fd80 00000089
NIP [a09be008] 0xa09be008
LR [a09bdfe8] 0xa09bdfe8
--- interrupt: 300
Instruction dump:
80010024 83e1001c 7c0803a6 4bffff80 3bc00800 4bffffd0 486b42fd 4bffffcc
81430084 71480002 41820038 554a0462 <0f0a0000> 80620060 74630001 40820034
Fixes: b5efec00b671 ("powerpc/32s: Move KUEP locking/unlocking in C")
Cc: stable@vger.kernel.org # v5.13+
Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4856f5574906e2aec0522be17bf3848a22b2cd0b.1629269345.git.christophe.leroy@csgroup.eu
|
|
Function "dma_map_sg" is entitled to merge adjacent entries
and return a value smaller than what was passed as "nents".
Subsequently "ib_map_mr_sg" needs to work with this value ("sg_dma_len")
rather than the original "nents" parameter ("sg_len").
This old RDS bug was exposed and reliably causes kernel panics
(using RDMA operations "rds-stress -D") on x86_64 starting with:
commit c588072bba6b ("iommu/vt-d: Convert intel iommu driver to the iommu ops")
Simply put: Linux 5.11 and later.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Link: https://lore.kernel.org/r/60efc69f-1f35-529d-a7ef-da0549cad143@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Ulf Hansson
Vincent Whitchurch
Andy Shevchenko
Linus Walleij
Wolfram Sang
Shaik Sajida Bhanu
Sai Krishna Potthuri
Manish Narani
Linus Torvalds
Jeff Layton
Jens Axboe
Mike Kravetz
Marco Elver
Johannes Weiner
Naoya Horiguchi
Nathan Chancellor
Mike Rapoport
Doug Berger
Yang Shi
Petr Pavlu
Rob Herring
Vladimir Oltean
Ido Schimmel
Sylwester Dziedziuch
Arkadiusz Kubalewski
Takashi Iwai
Kai-Heng Feng
Krzysztof Wilczyński
Marcin Bachry
Jim Quinlan
Hayes Wang
Matthieu Baerts
Paolo Abeni
Mark Rutland
Michael Ellerman
Christophe Leroy
Gerd Rausch