| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This reverts commit 39285e124edbc752331e98ace37cc141a6a3747a.
Looks like the change has unintended consequences in exposing
objects before they are initialized. Let's drop this patch
and try again in net-next.
Reported-by: syzbot+44ae022028805f4600fc@syzkaller.appspotmail.com
Fixes: 39285e124edb ("net: team: do not use dynamic lockdep key")
Link: https://lore.kernel.org/all/20230907103124.6adb7256@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recently we moved most cleanup from ntfs_put_super() into
ntfs3_kill_sb() as part of a bigger cleanup. This accidently also moved
dropping inode references stashed in ntfs3's sb->s_fs_info from
@sb->put_super() to @sb->kill_sb(). But generic_shutdown_super()
verifies that there are no busy inodes past sb->put_super(). Fix this
and disentangle dropping inode references from freeing @sb->s_fs_info.
Fixes: a4f64a300a29 ("ntfs3: free the sbi in ->kill_sb") # mainline only
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Mateusz reports that glibc turns 'fstat()' calls into 'fstatat()', and
that seems to have been going on for quite a long time due to glibc
having tried to simplify its stat logic into just one point.
This turns out to cause completely unnecessary overhead, where we then
go off and allocate the kernel side pathname, and actually look up the
empty path. Sure, our path lookup is quite optimized, but it still
causes a fair bit of allocation overhead and a couple of completely
unnecessary rounds of lockref accesses etc.
This is all hopefully getting fixed in user space, and there is a patch
floating around for just having glibc use the native fstat() system
call. But even with the current situation we can at least improve on
things by catching the situation and short-circuiting it.
Note that this is still measurably slower than just a plain 'fstat()',
since just checking that the filename is actually empty is somewhat
expensive due to inevitable user space access overhead from the kernel
(ie verifying pointers, and SMAP on x86). But it's still quite a bit
faster than actually looking up the path for real.
To quote numers from Mateusz:
"Sapphire Rapids, will-it-scale, ops/s
stock fstat 5088199
patched fstat 7625244 (+49%)
real fstat 8540383 (+67% / +12%)"
where that 'stock fstat' is the glibc translation of fstat into
fstatat() with an empty path, the 'patched fstat' is with this short
circuiting of the path lookup, and the 'real fstat' is the actual native
fstat() system call with none of this overhead.
Link: https://lore.kernel.org/lkml/20230903204858.lv7i3kqvw6eamhgz@f/
Reported-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
HNS3 NIC does not support GSO partial packets segmentation. Actually tunnel
packets for example NvGRE packets segment offload and checksum offload is
already supported. There is no need to keep gso partial feature bit. So
this patch removes it.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When sfp is absent or unidentified, the port type should be
displayed as PORT_OTHERS, rather than PORT_FIBRE.
Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type")
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We hope that tc qdisc and dcb ets commands can not be used crosswise.
If we want to use any of the commands to configure tc,
We must use the other command to clear the existing configuration.
However, when we configure a single tc with tc qdisc,
we can still configure it with dcb ets.
Because we use mqprio_active as the tag of tc qdisc configuration,
but with dcb ets, we do not check mqprio_active.
This patch fix this issue by check mqprio_active before
executing the dcb ets command. and add dcb_ets_active to
replace HCLGE_FLAG_DCB_ENABLE and HCLGE_FLAG_MQPRIO_ENABLE
at the hclge layer,
Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now in hns3_dbg_uninit(), there may be concurrency between
kfree buffer and read, it may result in memory error.
Moving debugfs_remove_recursive() in front of kfree buffer to ensure
they don't happen at the same time.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
req1->tcam_data is defined as "u8 tcam_data[8]", and we convert it as
(u32 *) without considerring byte order conversion,
it may result in printing wrong data for tcam_data.
Convert tcam_data to (__le32 *) first to fix it.
Fixes: b5a0b70d77b9 ("net: hns3: refactor dump fd tcam of debugfs")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
support query tx timeout threshold by debugfs
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the driver knocks the ring doorbell before updating
the ring->last_to_use in tx flow. if the hardware transmiting
packet and napi poll scheduling are fast enough, it may get
the old ring->last_to_use in drivers' napi poll.
In this case, the driver will think the tx is not completed, and
return directly without clear the flag __QUEUE_STATE_STACK_XOFF,
which may cause tx timeout.
Fixes: 20d06ca2679c ("net: hns3: optimize the tx clean process")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The KSZ9477 errata points out (in 'Module 4') the link up/down problems
when EEE (Energy Efficient Ethernet) is enabled in the device to which
the KSZ9477 tries to auto negotiate.
The suggested workaround is to clear advertisement of EEE for PHYs in
this chip driver.
To avoid regressions with other switch ICs the new MICREL_NO_EEE flag
has been introduced.
Moreover, the in-register disablement of MMD_DEVICE_ID_EEE_ADV.MMD_EEE_ADV
MMD register is removed, as this code is both; now executed too late
(after previous rework of the PHY and DSA for KSZ switches) and not
required as setting all members of eee_broken_modes bit field prevents
the KSZ9477 from advertising EEE.
Fixes: 69d3b36ca045 ("net: dsa: microchip: enable EEE support") # for KSZ9477
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # Confirmed disabled EEE with oscilloscope.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230905093315.784052-1-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Deliver audit log from __nf_tables_dump_rules(), table dereference at
the end of the table list loop might point to the list head, leading to
this crash.
[ 4137.407349] BUG: unable to handle page fault for address: 00000000001f3c50
[ 4137.407357] #PF: supervisor read access in kernel mode
[ 4137.407359] #PF: error_code(0x0000) - not-present page
[ 4137.407360] PGD 0 P4D 0
[ 4137.407363] Oops: 0000 [#1] PREEMPT SMP PTI
[ 4137.407365] CPU: 4 PID: 500177 Comm: nft Not tainted 6.5.0+ #277
[ 4137.407369] RIP: 0010:string+0x49/0xd0
[ 4137.407374] Code: ff 77 36 45 89 d1 31 f6 49 01 f9 66 45 85 d2 75 19 eb 1e 49 39 f8 76 02 88 07 48 83 c7 01 83 c6 01 48 83 c2 01 4c 39 cf 74 07 <0f> b6 02 84 c0 75 e2 4c 89 c2 e9 58 e5 ff ff 48 c7 c0 0e b2 ff 81
[ 4137.407377] RSP: 0018:ffff8881179737f0 EFLAGS: 00010286
[ 4137.407379] RAX: 00000000001f2c50 RBX: ffff888117973848 RCX: ffff0a00ffffff04
[ 4137.407380] RDX: 00000000001f3c50 RSI: 0000000000000000 RDI: 0000000000000000
[ 4137.407381] RBP: 0000000000000000 R08: 0000000000000000 R09: 00000000ffffffff
[ 4137.407383] R10: ffffffffffffffff R11: ffff88813584d200 R12: 0000000000000000
[ 4137.407384] R13: ffffffffa15cf709 R14: 0000000000000000 R15: ffffffffa15cf709
[ 4137.407385] FS: 00007fcfc18bb580(0000) GS:ffff88840e700000(0000) knlGS:0000000000000000
[ 4137.407387] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4137.407388] CR2: 00000000001f3c50 CR3: 00000001055b2001 CR4: 00000000001706e0
[ 4137.407390] Call Trace:
[ 4137.407392] <TASK>
[ 4137.407393] ? __die+0x1b/0x60
[ 4137.407397] ? page_fault_oops+0x6b/0xa0
[ 4137.407399] ? exc_page_fault+0x60/0x120
[ 4137.407403] ? asm_exc_page_fault+0x22/0x30
[ 4137.407408] ? string+0x49/0xd0
[ 4137.407410] vsnprintf+0x257/0x4f0
[ 4137.407414] kvasprintf+0x3e/0xb0
[ 4137.407417] kasprintf+0x3e/0x50
[ 4137.407419] nf_tables_dump_rules+0x1c0/0x360 [nf_tables]
[ 4137.407439] ? __alloc_skb+0xc3/0x170
[ 4137.407442] netlink_dump+0x170/0x330
[ 4137.407447] __netlink_dump_start+0x227/0x300
[ 4137.407449] nf_tables_getrule+0x205/0x390 [nf_tables]
Deliver audit log only once at the end of the rule dump+reset for
consistency with the set dump+reset.
Ensure audit reset access to table under rcu read side lock. The table
list iteration holds rcu read lock side, but recent audit code
dereferences table object out of the rcu read lock side.
Fixes: ea078ae9108e ("netfilter: nf_tables: Audit log rule reset")
Fixes: 7e9be1124dbe ("netfilter: nf_tables: Audit log setelem reset")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can
lead to the use of wrong `CIDR_POS(c)` for calculating array offsets,
which can lead to integer underflow. As a result, it leads to slab
out-of-bound access.
This patch adds back the IP_SET_HASH_WITH_NET0 macro to
ip_set_hash_netportnet to address the issue.
Fixes: 886503f34d63 ("netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net")
Suggested-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Kyle Zeng <zengyhkyle@gmail.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
New elements in this transaction might expired before such transaction
ends. Skip sync GC for such elements otherwise commit path might walk
over an already released object. Once transaction is finished, async GC
will collect such expired element.
Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Add a brief description to the enum's comment.
Fixes: 837830a4b439 ("netfilter: nf_tables: add NFTA_RULE_CHAIN_ID attribute")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
The opt_num field is controlled by user mode and is not currently
validated inside the kernel. An attacker can take advantage of this to
trigger an OOB read and potentially leak information.
BUG: KASAN: slab-out-of-bounds in nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88
Read of size 2 at addr ffff88804bc64272 by task poc/6431
CPU: 1 PID: 6431 Comm: poc Not tainted 6.0.0-rc4 #1
Call Trace:
nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88
nf_osf_find+0x186/0x2f0 net/netfilter/nfnetlink_osf.c:281
nft_osf_eval+0x37f/0x590 net/netfilter/nft_osf.c:47
expr_call_ops_eval net/netfilter/nf_tables_core.c:214
nft_do_chain+0x2b0/0x1490 net/netfilter/nf_tables_core.c:264
nft_do_chain_ipv4+0x17c/0x1f0 net/netfilter/nft_chain_filter.c:23
[..]
Also add validation to genre, subtype and version fields.
Fixes: 11eeef41d5f6 ("netfilter: passive OS fingerprint xtables match")
Reported-by: Lucas Leong <wmliang@infosec.exchange>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
If priv->len is a multiple of 4, then dst[len / 4] can write past
the destination array which leads to stack corruption.
This construct is necessary to clean the remainder of the register
in case ->len is NOT a multiple of the register size, so make it
conditional just like nft_payload.c does.
The bug was added in 4.1 cycle and then copied/inherited when
tcp/sctp and ip option support was added.
Bug reported by Zero Day Initiative project (ZDI-CAN-21950,
ZDI-CAN-21951, ZDI-CAN-21961).
Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing")
Fixes: 935b7f643018 ("netfilter: nft_exthdr: add TCP option matching")
Fixes: 133dc203d77d ("netfilter: nft_exthdr: Support SCTP chunks")
Fixes: dbb5281a1f84 ("netfilter: nf_tables: add support for matching IPv4 options")
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
This patch checks the sk_omem_alloc has been uncharged by bpf_sk_storage
during the __sk_destruct.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901231129.578493-4-martin.lau@linux.dev
|
|
The commit c83597fa5dc6 ("bpf: Refactor some inode/task/sk storage functions
for reuse"), refactored the bpf_{sk,task,inode}_storage_free() into
bpf_local_storage_unlink_nolock() which then later renamed to
bpf_local_storage_destroy(). The commit accidentally passed the
"bool uncharge_mem = false" argument to bpf_selem_unlink_storage_nolock()
which then stopped the uncharge from happening to the sk->sk_omem_alloc.
This missing uncharge only happens when the sk is going away (during
__sk_destruct).
This patch fixes it by always passing "uncharge_mem = true". It is a
noop to the task/inode/cgroup storage because they do not have the
map_local_storage_(un)charge enabled in the map_ops. A followup patch
will be done in bpf-next to remove the uncharge_mem argument.
A selftest is added in the next patch.
Fixes: c83597fa5dc6 ("bpf: Refactor some inode/task/sk storage functions for reuse")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901231129.578493-3-martin.lau@linux.dev
|
|
'./test_progs -t test_local_storage' reported a splat:
[ 27.137569] =============================
[ 27.138122] [ BUG: Invalid wait context ]
[ 27.138650] 6.5.0-03980-gd11ae1b16b0a #247 Tainted: G O
[ 27.139542] -----------------------------
[ 27.140106] test_progs/1729 is trying to lock:
[ 27.140713] ffff8883ef047b88 (stock_lock){-.-.}-{3:3}, at: local_lock_acquire+0x9/0x130
[ 27.141834] other info that might help us debug this:
[ 27.142437] context-{5:5}
[ 27.142856] 2 locks held by test_progs/1729:
[ 27.143352] #0: ffffffff84bcd9c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x40
[ 27.144492] #1: ffff888107deb2c0 (&storage->lock){..-.}-{2:2}, at: bpf_local_storage_update+0x39e/0x8e0
[ 27.145855] stack backtrace:
[ 27.146274] CPU: 0 PID: 1729 Comm: test_progs Tainted: G O 6.5.0-03980-gd11ae1b16b0a #247
[ 27.147550] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 27.149127] Call Trace:
[ 27.149490] <TASK>
[ 27.149867] dump_stack_lvl+0x130/0x1d0
[ 27.152609] dump_stack+0x14/0x20
[ 27.153131] __lock_acquire+0x1657/0x2220
[ 27.153677] lock_acquire+0x1b8/0x510
[ 27.157908] local_lock_acquire+0x29/0x130
[ 27.159048] obj_cgroup_charge+0xf4/0x3c0
[ 27.160794] slab_pre_alloc_hook+0x28e/0x2b0
[ 27.161931] __kmem_cache_alloc_node+0x51/0x210
[ 27.163557] __kmalloc+0xaa/0x210
[ 27.164593] bpf_map_kzalloc+0xbc/0x170
[ 27.165147] bpf_selem_alloc+0x130/0x510
[ 27.166295] bpf_local_storage_update+0x5aa/0x8e0
[ 27.167042] bpf_fd_sk_storage_update_elem+0xdb/0x1a0
[ 27.169199] bpf_map_update_value+0x415/0x4f0
[ 27.169871] map_update_elem+0x413/0x550
[ 27.170330] __sys_bpf+0x5e9/0x640
[ 27.174065] __x64_sys_bpf+0x80/0x90
[ 27.174568] do_syscall_64+0x48/0xa0
[ 27.175201] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 27.175932] RIP: 0033:0x7effb40e41ad
[ 27.176357] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d8
[ 27.179028] RSP: 002b:00007ffe64c21fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141
[ 27.180088] RAX: ffffffffffffffda RBX: 00007ffe64c22768 RCX: 00007effb40e41ad
[ 27.181082] RDX: 0000000000000020 RSI: 00007ffe64c22008 RDI: 0000000000000002
[ 27.182030] RBP: 00007ffe64c21ff0 R08: 0000000000000000 R09: 00007ffe64c22788
[ 27.183038] R10: 0000000000000064 R11: 0000000000000202 R12: 0000000000000000
[ 27.184006] R13: 00007ffe64c22788 R14: 00007effb42a1000 R15: 0000000000000000
[ 27.184958] </TASK>
It complains about acquiring a local_lock while holding a raw_spin_lock.
It means it should not allocate memory while holding a raw_spin_lock
since it is not safe for RT.
raw_spin_lock is needed because bpf_local_storage supports tracing
context. In particular for task local storage, it is easy to
get a "current" task PTR_TO_BTF_ID in tracing bpf prog.
However, task (and cgroup) local storage has already been moved to
bpf mem allocator which can be used after raw_spin_lock.
The splat is for the sk storage. For sk (and inode) storage,
it has not been moved to bpf mem allocator. Using raw_spin_lock or not,
kzalloc(GFP_ATOMIC) could theoretically be unsafe in tracing context.
However, the local storage helper requires a verifier accepted
sk pointer (PTR_TO_BTF_ID), it is hypothetical if that (mean running
a bpf prog in a kzalloc unsafe context and also able to hold a verifier
accepted sk pointer) could happen.
This patch avoids kzalloc after raw_spin_lock to silent the splat.
There is an existing kzalloc before the raw_spin_lock. At that point,
a kzalloc is very likely required because a lookup has just been done
before. Thus, this patch always does the kzalloc before acquiring
the raw_spin_lock and remove the later kzalloc usage after the
raw_spin_lock. After this change, it will have a charge and then
uncharge during the syscall bpf_map_update_elem() code path.
This patch opts for simplicity and not continue the old
optimization to save one charge and uncharge.
This issue is dated back to the very first commit of bpf_sk_storage
which had been refactored multiple times to create task, inode, and
cgroup storage. This patch uses a Fixes tag with a more recent
commit that should be easier to do backport.
Fixes: b00fa38a9c1c ("bpf: Enable non-atomic allocations in local storage")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901231129.578493-2-martin.lau@linux.dev
|
|
s390x eBPF programs use the following extension to the s390x calling
convention: tail call counter is passed on stack at offset
STK_OFF_TCCNT, which callees otherwise use as scratch space.
Currently trampoline does not respect this and clobbers tail call
counter. This breaks enforcing tail call limits in eBPF programs, which
have trampolines attached to them.
Fix by forwarding a copy of the tail call counter to the original eBPF
program in the trampoline (for fexit), and by restoring it at the end
of the trampoline (for fentry).
Fixes: 528eb2cb87bc ("s390/bpf: Implement arch_prepare_bpf_trampoline()")
Reported-by: Leon Hwang <hffilwlqm@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230906004448.111674-1-iii@linux.ibm.com
|
|
__bpf_prog_enter_recur() assigns bpf_tramp_run_ctx::saved_run_ctx before
performing the recursion check which means in case of a recursion
__bpf_prog_exit_recur() uses the previously set bpf_tramp_run_ctx::saved_run_ctx
value.
__bpf_prog_enter_sleepable_recur() assigns bpf_tramp_run_ctx::saved_run_ctx
after the recursion check which means in case of a recursion
__bpf_prog_exit_sleepable_recur() uses an uninitialized value. This does not
look right. If I read the entry trampoline code right, then bpf_tramp_run_ctx
isn't initialized upfront.
Align __bpf_prog_enter_sleepable_recur() with __bpf_prog_enter_recur() and
set bpf_tramp_run_ctx::saved_run_ctx before the recursion check is made.
Remove the assignment of saved_run_ctx in kern_sys_bpf() since it happens
a few cycles later.
Fixes: e384c7b7b46d0 ("bpf, x86: Create bpf_tramp_run_ctx on the caller thread's stack")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230830080405.251926-3-bigeasy@linutronix.de
|
|
If __bpf_prog_enter_sleepable_recur() detects recursion then it returns
0 without undoing rcu_read_lock_trace(), migrate_disable() or
decrementing the recursion counter. This is fine in the JIT case because
the JIT code will jump in the 0 case to the end and invoke the matching
exit trampoline (__bpf_prog_exit_sleepable_recur()).
This is not the case in kern_sys_bpf() which returns directly to the
caller with an error code.
Add __bpf_prog_exit_sleepable_recur() as clean up in the recursion case.
Fixes: b1d18a7574d0d ("bpf: Extend sys_bpf commands for bpf_syscall programs.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230830080405.251926-2-bigeasy@linutronix.de
|
|
sphinx complains about the use of "%PHYLINK_PCS_NEG_*":
Documentation/networking/kapi:144: ./include/linux/phylink.h:601: WARNING: Inline literal start-string without end-string.
Documentation/networking/kapi:144: ./include/linux/phylink.h:633: WARNING: Inline literal start-string without end-string.
These are not valid symbols so drop the '%' prefix.
Alternatively we could use %PHYLINK_PCS_NEG_\* (escape the *)
or use normal literal ``PHYLINK_PCS_NEG_*`` but there is already
a handful of un-adorned DEFINE_* in this file.
Fixes: f99d471afa03 ("net: phylink: add PCS negotiation mode")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/all/20230626162908.2f149f98@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The blamed commit left this delta behind:
struct sja1105_cbs_entry {
- u64 port;
- u64 prio;
+ u64 port; /* Not used for SJA1110 */
+ u64 prio; /* Not used for SJA1110 */
u64 credit_hi;
u64 credit_lo;
u64 send_slope;
u64 idle_slope;
};
but did not actually implement tc-cbs offload fully for the new switch.
The offload is accepted, but it doesn't work.
The difference compared to earlier switch generations is that now, the
table of CBS shapers is sparse, because there are many more shapers, so
the mapping between a {port, prio} and a table index is static, rather
than requiring us to store the port and prio into the sja1105_cbs_entry.
So, the problem is that the code programs the CBS shaper parameters at a
dynamic table index which is incorrect.
All that needs to be done for SJA1110 CBS shapers to work is to bypass
the logic which allocates shapers in a dense manner, as for SJA1105, and
use the fixed mapping instead.
Fixes: 3e77e59bf8cf ("net: dsa: sja1105: add support for the SJA1110 switch family")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After running command [2] too many times in a row:
[1] $ tc qdisc add dev sw2p0 root handle 1: mqprio num_tc 8 \
map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0
[2] $ tc qdisc replace dev sw2p0 parent 1:1 cbs offload 1 \
idleslope 120000 sendslope -880000 locredit -1320 hicredit 180
(aka more than priv->info->num_cbs_shapers times)
we start seeing the following error message:
Error: Specified device failed to setup cbs hardware offload.
This comes from the fact that ndo_setup_tc(TC_SETUP_QDISC_CBS) presents
the same API for the qdisc create and replace cases, and the sja1105
driver fails to distinguish between the 2. Thus, it always thinks that
it must allocate the same shaper for a {port, queue} pair, when it may
instead have to replace an existing one.
Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
More careful measurement of the tc-cbs bandwidth shows that the stream
bandwidth (effectively idleslope) increases, there is a larger and
larger discrepancy between the rate limit obtained by the software
Qdisc, and the rate limit obtained by its offloaded counterpart.
The discrepancy becomes so large, that e.g. at an idleslope of 40000
(40Mbps), the offloaded cbs does not actually rate limit anything, and
traffic will pass at line rate through a 100 Mbps port.
The reason for the discrepancy is that the hardware documentation I've
been following is incorrect. UM11040.pdf (for SJA1105P/Q/R/S) states
about IDLE_SLOPE that it is "the rate (in unit of bytes/sec) at which
the credit counter is increased".
Cross-checking with UM10944.pdf (for SJA1105E/T) and UM11107.pdf
(for SJA1110), the wording is different: "This field specifies the
value, in bytes per second times link speed, by which the credit counter
is increased".
So there's an extra scaling for link speed that the driver is currently
not accounting for, and apparently (empirically), that link speed is
expressed in Kbps.
I've pondered whether to pollute the sja1105_mac_link_up()
implementation with CBS shaper reprogramming, but I don't think it is
worth it. IMO, the UAPI exposed by tc-cbs requires user space to
recalculate the sendslope anyway, since the formula for that depends on
port_transmit_rate (see man tc-cbs), which is not an invariant from tc's
perspective.
So we use the offload->sendslope and offload->idleslope to deduce the
original port_transmit_rate from the CBS formula, and use that value to
scale the offload->sendslope and offload->idleslope to values that the
hardware understands.
Some numerical data points:
40Mbps stream, max interfering frame size 1500, port speed 100M
---------------------------------------------------------------
tc-cbs parameters:
idleslope 40000 sendslope -60000 locredit -900 hicredit 600
which result in hardware values:
Before (doesn't work) After (works)
credit_hi 600 600
credit_lo 900 900
send_slope 7500000 75
idle_slope 5000000 50
40Mbps stream, max interfering frame size 1500, port speed 1G
-------------------------------------------------------------
tc-cbs parameters:
idleslope 40000 sendslope -960000 locredit -1440 hicredit 60
which result in hardware values:
Before (doesn't work) After (works)
credit_hi 60 60
credit_lo 1440 1440
send_slope 120000000 120
idle_slope 5000000 5
5.12Mbps stream, max interfering frame size 1522, port speed 100M
-----------------------------------------------------------------
tc-cbs parameters:
idleslope 5120 sendslope -94880 locredit -1444 hicredit 77
which result in hardware values:
Before (doesn't work) After (works)
credit_hi 77 77
credit_lo 1444 1444
send_slope 11860000 118
idle_slope 640000 6
Tested on SJA1105T, SJA1105S and SJA1110A, at 1Gbps and 100Mbps.
Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Reported-by: Yanan Yang <yanan.yang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ACL flow table is required in switchdev mode when metadata is enabled,
driver creates such table when loading each vport. However, not every
vport is loaded in switchdev mode. Such as ECPF if it's the eswitch manager.
In this case, ACL flow table is still needed.
To make it modularized, create ACL flow table for eswitch manager as
default and skip such operations when loading manager vport.
Also, there is no need to load the eswitch manager vport in switchdev mode.
This means there is no need to load it on regular connect-x HCAs where
the PF is the eswitch manager. This will avoid creating duplicate ACL
flow table for host PF vport.
Fixes: 29bcb6e4fe70 ("net/mlx5e: E-Switch, Use metadata for vport matching in send-to-vport rules")
Fixes: eb8e9fae0a22 ("mlx5/core: E-Switch, Allocate ECPF vport if it's an eswitch manager")
Fixes: 5019833d661f ("net/mlx5: E-switch, Introduce helper function to enable/disable vports")
Signed-off-by: Bodong Wang <bodong@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the cited commit, the mirred devices are recorded and checked while
parsing the actions. In order to avoid system crash, the duplicate
action in a single rule is not allowed.
But the rule is actually break down into several FTEs in different
tables, for either mirroring, or the specified types of actions which
use post action infrastructure.
It will reject certain action list by mistake, for example:
actions:enp8s0f0_1,set(ipv4(ttl=63)),enp8s0f0_0,enp8s0f0_1.
Here the rule is split to two FTEs because of pedit action.
To fix this issue, when parsing the rule actions, reset if_count to
clear the mirred devices array if the rule is split to multiple
FTEs, and then the duplicate checking is restarted.
Fixes: 554fe75c1b3f ("net/mlx5e: Avoid duplicating rule destinations")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot/KCSAN reported data-races in iptunnel_xmit_stats() [1]
This can run from multiple cpus without mutual exclusion.
Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.
[1]
BUG: KCSAN: data-race in iptunnel_xmit / iptunnel_xmit
read-write to 0xffff8881353df170 of 8 bytes by task 30263 on cpu 1:
iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline]
iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87
ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662
__netdev_start_xmit include/linux/netdevice.h:4889 [inline]
netdev_start_xmit include/linux/netdevice.h:4903 [inline]
xmit_one net/core/dev.c:3544 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560
__dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
__bpf_tx_skb net/core/filter.c:2129 [inline]
__bpf_redirect_no_mac net/core/filter.c:2159 [inline]
__bpf_redirect+0x723/0x9c0 net/core/filter.c:2182
____bpf_clone_redirect net/core/filter.c:2453 [inline]
bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425
___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954
__bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195
bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline]
__bpf_prog_run include/linux/filter.h:609 [inline]
bpf_prog_run include/linux/filter.h:616 [inline]
bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423
bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045
bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996
__sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353
__do_sys_bpf kernel/bpf/syscall.c:5439 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5437 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read-write to 0xffff8881353df170 of 8 bytes by task 30249 on cpu 0:
iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline]
iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87
ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662
__netdev_start_xmit include/linux/netdevice.h:4889 [inline]
netdev_start_xmit include/linux/netdevice.h:4903 [inline]
xmit_one net/core/dev.c:3544 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560
__dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
__bpf_tx_skb net/core/filter.c:2129 [inline]
__bpf_redirect_no_mac net/core/filter.c:2159 [inline]
__bpf_redirect+0x723/0x9c0 net/core/filter.c:2182
____bpf_clone_redirect net/core/filter.c:2453 [inline]
bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425
___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954
__bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195
bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline]
__bpf_prog_run include/linux/filter.h:609 [inline]
bpf_prog_run include/linux/filter.h:616 [inline]
bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423
bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045
bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996
__sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353
__do_sys_bpf kernel/bpf/syscall.c:5439 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5437 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x0000000000018830 -> 0x0000000000018831
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 30249 Comm: syz-executor.4 Not tainted 6.5.0-syzkaller-11704-g3f86ed6ec0b3 #0
Fixes: 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
team interface has used a dynamic lockdep key to avoid false-positive
lockdep deadlock detection. Virtual interfaces such as team usually
have their own lock for protecting private data.
These interfaces can be nested.
team0
|
team1
Each interface's lock is actually different(team0->lock and team1->lock).
So,
mutex_lock(&team0->lock);
mutex_lock(&team1->lock);
mutex_unlock(&team1->lock);
mutex_unlock(&team0->lock);
The above case is absolutely safe. But lockdep warns about deadlock.
Because the lockdep understands these two locks are same. This is a
false-positive lockdep warning.
So, in order to avoid this problem, the team interfaces started to use
dynamic lockdep key. The false-positive problem was fixed, but it
introduced a new problem.
When the new team virtual interface is created, it registers a dynamic
lockdep key(creates dynamic lockdep key) and uses it. But there is the
limitation of the number of lockdep keys.
So, If so many team interfaces are created, it consumes all lockdep keys.
Then, the lockdep stops to work and warns about it.
In order to fix this problem, team interfaces use the subclass instead
of the dynamic key. So, when a new team interface is created, it doesn't
register(create) a new lockdep, but uses existed subclass key instead.
It is already used by the bonding interface for a similar case.
As the bonding interface does, the subclass variable is the same as
the 'dev->nested_level'. This variable indicates the depth in the stacked
interface graph.
The 'dev->nested_level' is protected by RTNL and RCU.
So, 'mutex_lock_nested()' for 'team->lock' requires RTNL or RCU.
In the current code, 'team->lock' is usually acquired under RTNL, there is
no problem with using 'dev->nested_level'.
The 'team_nl_team_get()' and The 'lb_stats_refresh()' functions acquire
'team->lock' without RTNL.
But these don't iterate their own ports nested so they don't need nested
lock.
Reproducer:
for i in {0..1000}
do
ip link add team$i type team
ip link add dummy$i master team$i type dummy
ip link set dummy$i up
ip link set team$i up
done
Splat looks like:
BUG: MAX_LOCKDEP_ENTRIES too low!
turning off the locking correctness validator.
Please attach the output of /proc/lock_stat to the bug report
CPU: 0 PID: 4104 Comm: ip Not tainted 6.5.0-rc7+ #45
Call Trace:
<TASK>
dump_stack_lvl+0x64/0xb0
add_lock_to_list+0x30d/0x5e0
check_prev_add+0x73a/0x23a0
...
sock_def_readable+0xfe/0x4f0
netlink_broadcast+0x76b/0xac0
nlmsg_notify+0x69/0x1d0
dev_open+0xed/0x130
...
Reported-by: syzbot+9bbbacfbf1e04d5221f7@syzkaller.appspotmail.com
Fixes: 369f61bee0f5 ("team: fix nested locking lockdep warning")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__skb_get_hash_symmetric() was added to compute a symmetric hash over
the protocol, addresses and transport ports, by commit eb70db875671
("packet: Use symmetric hash for PACKET_FANOUT_HASH."). It uses
flow_keys_dissector_symmetric_keys as the flow_dissector to incorporate
IPv4 addresses, IPv6 addresses and ports. However, it should not specify
the flag as FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL, which stops further
dissection when an IPv6 flow label is encountered, making transport
ports not being incorporated in such case.
As a consequence, the symmetric hash is based on 5-tuple for IPv4 but
3-tuple for IPv6 when flow label is present. It caused a few problems,
e.g. when nft symhash and openvswitch l4_sym rely on the symmetric hash
to perform load balancing as different L4 flows between two given IPv6
addresses would always get the same symmetric hash, leading to uneven
traffic distribution.
Removing the use of FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL makes sure the
symmetric hash is based on 5-tuple for both IPv4 and IPv6 consistently.
Fixes: eb70db875671 ("packet: Use symmetric hash for PACKET_FANOUT_HASH.")
Reported-by: Lars Ekman <uablrek@gmail.com>
Closes: https://github.com/antrea-io/antrea/issues/5457
Signed-off-by: Quan Tian <qtian@vmware.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "maxim,ds3231" compatible is described in the rtc-ds1307.yaml, so
there is no need to keep the text bindings version.
Remove the maxim,ds3231.txt file in favor of the rtc-ds1307.yaml binding.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230902134407.2589099-1-festevam@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The RTC core already prints a message when the RTC is registered and when
registering fails, it is not necessary to have more in the driver.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230827221643.544259-3-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The RTC core already prints a message when the RTC is registered and when
registering fails, it is not necessary to have more in the driver.
Link: https://lore.kernel.org/r/20230827221643.544259-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The core already print a message once the rtc is successfully registered,
it is not necessary to print an other one.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230827221643.544259-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When the alarm is not enabled, it may never have been set and so we can't
expect it to be valid. This will prevent the apparition of boot messages
like this one:
rtc rtc0: invalid alarm value: 2023-7-8 45:85:85
Link: https://lore.kernel.org/r/20230827221532.543353-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
I3C masters are expected to support hot-join. This means at initialization
time we might not yet discover any device and this should not be treated
as a fatal error.
During the DAA procedure which happens at probe time, if no device has
joined, all CCC will be NACKed (from a bus perspective). This leads to an
early return with an error code which fails the probe of the master.
Let's avoid this by just telling the core through an I3C_ERROR_M2
return command code that no device was discovered, which is a valid
situation. This way the master will no longer bail out and fail to probe
for a wrong reason.
Cc: stable@vger.kernel.org
Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230831141324.2841525-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Convert deprecated format to DT schema format.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230905072740.23859-1-rgallaispou@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Convert the OmniVision OV7251 Image Sensor binding to DT schema format.
vddd-supply was listed as required, but the example and actual user
don't have it. Also, the data brief says it has an internal regulator,
so perhaps it is truly optional.
Add missing common "link-frequencies" which is used and required by the
Linux driver.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Link: https://lore.kernel.org/r/20230817202713.2180195-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The OV5695 binding is almost the same as the OV5693 binding. The only
difference is 'clock-names' is defined for OV5695. However, the lack of
clock-names is an omission as the Linux OV5693 driver expects the same
'xvclk' clock name.
'link-frequencies' is required by OV5693, but not OV5695, so make that
conditional. Really, this shouldn't vary by device, but we're stuck with
the existing binding use.
The rockchip-isp1 binding example is missing required properties, so it
has to be updated as well.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230817202647.2179609-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Random kernel crash detected in TI CICD when regulator driver is added.
This is root caused to irq index increment being done twice causing
irq_data being allocated outside of the range.
- Rework tps6594_request_reg_irqs with correct index increment
- Adjust irq_data kmalloc size to the exact size needed for the device
This has been reported on TI mainline. No public bug report associated.
Reported-by: Udit Kumar <u-kumar1@ti.com>
Fixes: f17ccc5deb4d ("regulator: tps6594-regulator: Add driver for TI TPS6594 regulators")
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Link: https://lore.kernel.org/r/20230828-tps6594_random_boot_crash_fix-v1-1-f29cbf9ddb37@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The only interface that allows drivers establishing
liner mappings is vmem_add_mapping(). It does check
a requested range against allowed limits and a call
to modify_pagetable() with an invalid mapping range
is impossible.
Hence, an attempt to map an address range outside of
the identity mapping or vmemmap array could only be
kernel bug.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
With the dev_set_name() prototype it's not obvious that it takes
a formatted string as a parameter. Use its facility instead of
duplicating the same with strncpy()/snprintf() calls.
With this, also prevent return error code to be shadowed.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230831110000.24279-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When dev_set_name() fails, zcdn_create() doesn't free the newly
allocated resources. Do it.
Fixes: 00fab2350e6b ("s390/zcrypt: multiple zcrypt device nodes support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230831110000.24279-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
MAX_DMA_ADDRESS is defined and treated as a physical address,
whereas it should be virtual.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Commit 1a10a44dfc1d ("sparc64: implement the new page table range API")
missed initialization of folio variable in tlb_batch_add() which causes
boot tests to crash.
Add missing initialization.
Link: https://lkml.kernel.org/r/20230904174350.GF3223@kernel.org
Fixes: 1a10a44dfc1d ("sparc64: implement the new page table range API")
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We found a softlock issue in our test, analyzed the logs, and found that
the relevant CPU call trace as follows:
CPU0:
_do_fork
-> copy_process()
-> write_lock_irq(&tasklist_lock) //Disable irq,waiting for
//tasklist_lock
CPU1:
wp_page_copy()
->pte_offset_map_lock()
-> spin_lock(&page->ptl); //Hold page->ptl
-> ptep_clear_flush()
-> flush_tlb_others() ...
-> smp_call_function_many()
-> arch_send_call_function_ipi_mask()
-> csd_lock_wait() //Waiting for other CPUs respond
//IPI
CPU2:
collect_procs_anon()
-> read_lock(&tasklist_lock) //Hold tasklist_lock
->for_each_process(tsk)
-> page_mapped_in_vma()
-> page_vma_mapped_walk()
-> map_pte()
->spin_lock(&page->ptl) //Waiting for page->ptl
We can see that CPU1 waiting for CPU0 respond IPI，CPU0 waiting for CPU2
unlock tasklist_lock, CPU2 waiting for CPU1 unlock page->ptl. As a result,
softlockup is triggered.
For collect_procs_anon(), what we're doing is task list iteration, during
the iteration, with the help of call_rcu(), the task_struct object is freed
only after one or more grace periods elapse. the logic as follows:
release_task()
-> __exit_signal()
-> __unhash_process()
-> list_del_rcu()
-> put_task_struct_rcu_user()
-> call_rcu(&task->rcu, delayed_put_task_struct)
delayed_put_task_struct()
-> put_task_struct()
-> if (refcount_sub_and_test())
__put_task_struct()
-> free_task()
Therefore, under the protection of the rcu lock, we can safely use
get_task_struct() to ensure a safe reference to task_struct during the
iteration.
By removing the use of tasklist_lock in task list iteration, we can break
the softlock chain above.
The same logic can also be applied to:
- collect_procs_file()
- collect_procs_fsdax()
- collect_procs_ksm()
Link: https://lkml.kernel.org/r/20230828022527.241693-1-tongtiangen@huawei.com
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This warning is telling userspace developers to pass MFD_EXEC and
MFD_NOEXEC_SEAL to memfd_create(). Commit 434ed3350f57 ("memfd: improve
userspace warnings for missing exec-related flags") made the warning more
frequent and visible in the hope that this would accelerate the fixing of
errant userspace.
But the overall effect is to generate far too much dmesg noise.
Fixes: 434ed3350f57 ("memfd: improve userspace warnings for missing exec-related flags")
Reported-by: Damian Tometzki <dtometzki@fedoraproject.org>
Closes: https://lkml.kernel.org/r/ZPFzCSIgZ4QuHsSC@fedora.fritz.box
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The of_overlay_fdt_apply has been changed but when CONFIG_OF_OVERLAY
support is not configured then old stub prototype is declared
by of.h header.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Fixes: 47284862bfc7 ("of: overlay: Extend of_overlay_fdt_apply() to specify the target node")
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20230904100002.7913-1-pisa@cmp.felk.cvut.cz
Signed-off-by: Rob Herring <robh@kernel.org>
|
Jakub Kicinski
Christian Brauner
Linus Torvalds
Jie Wang
Yisen Zhuang
Jijie Shao
Hao Chen
Jian Shen
Lukasz Majewski
Pablo Neira Ayuso
Kyle Zeng
Phil Sutter
Wander Lairson Costa
Florian Westphal
Martin KaFai Lau
Ilya Leoshkevich
Sebastian Andrzej Siewior
Vladimir Oltean
Bodong Wang
Jianbo Liu
Eric Dumazet
Taehee Yoo
Quan Tian
Fabio Estevam
Alexandre Belloni
Frank Li
Raphael Gallais-Pou
Rob Herring
Jerome Neanne
Alexander Gordeev
Andy Shevchenko
Mike Rapoport (IBM)
Tong Tiangen
Andrew Morton
Pavel Pisa