aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-10-07staging: wfx: update copyrights datesJérôme Pouiller33-33/+33
Most of the files have been modified in 2020, so update the copyright notices. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20201007101943.749898-6-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07staging: wfx: fix QoS priority for slow busesJérôme Pouiller2-2/+13
The device is in charge of respecting the QoS constraints. The driver have to ensure that all the queues contain data and the device choose the right queue to send. The things starts to be more difficult when the bandwidth of the bus is lower than the bandwidth of the WiFi. The device quickly sends the frames of the highest priority queue. Then, it starts to send frames from a lower priority queue. Though, there are still some high priority frames waiting in the driver. To work around this problem, this patch add some priorities to each queue. The weigh of the queue was (roughly) calculated experimentally by checking the speed ratio of each queue when the bus does not limit the traffic: - Be/Bk -> 20Mbps/10Mbps - Vi/Be -> 36Mbps/180Kbps - Vo/Be -> 35Mbps/600Kbps - Vi/Vo -> 24Mbps/12Mbps So, if we fix the weigh of the Background to 1, the weight of Best Effort should be 2. The weight of Video should be 116. However, since there is only 32 queues, it make no sense to use a value greater than 64[1]. And finally, the weight of the Voice is set to 128. [1] Because of this approximation, with very slow bus, we can still observe frame starvation when we measure the speed ratio of Vi/Be. It is around 35Mbps/1Mbps (instead of 36Mbps/180Kbps). However, it is still in accepted error range. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20201007101943.749898-5-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07staging: wfx: fix BA sessions for older firmwaresJérôme Pouiller1-0/+3
Firmwares with API < 3.6 do not forward DELBA requests. Thus, when a Block Ack session is restarted, the reordering buffer is not flushed and the received sequence number is not contiguous. Therefore, mac80211 starts to wait some missing frames that it will never receive. This patch disables the reordering buffer for old firmware. It is harmless when the network is unencrypted. When the network is encrypted, the non-contiguous frames will be thrown away by the TKIP/CCMP replay protection. So, the user will observe some packet loss with UDP and performance drop with TCP. Fixes: e5da5fbd7741 ("staging: wfx: fix CCMP/TKIP replay protection") Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20201007101943.749898-4-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07staging: wfx: remove remaining code of 'secure link' featureJérôme Pouiller2-19/+0
Commit e8d607ce0c81 ("staging: wfx: drop 'secure link' feature") had removed the 'secure link' feature. However, a few lines of codes were yet here. Fixes: e8d607ce0c81 ("staging: wfx: drop 'secure link' feature") Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20201007101943.749898-3-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07staging: wfx: fix handling of MMIC errorJérôme Pouiller1-1/+1
As expected, when the device detect a MMIC error, it returns a specific status. However, it also strip IV from the frame (don't ask me why). So, with the current code, mac80211 detects a corrupted frame and it drops it before it handle the MMIC error. The expected behavior would be to detect MMIC error then to renegotiate the EAP session. So, this patch correctly informs mac80211 that IV is not available. So, mac80211 correctly takes into account the MMIC error. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20201007101943.749898-2-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-06staging: vchiq: Fix list_for_each exit testsDan Carpenter1-5/+7
After a list_for_each_entry() loop, the list iterator is always non-NULL so these conditions don't work. If the "waiter" is not found then this results in an out of bounds access. I have fixed it by introducing a new "found" variable. In one case, I used an else statement for readability. Fixes: 46e4b9ec4fa4 ("staging: vchiq_arm: use list_for_each_entry when accessing bulk_waiter_list") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201006134748.GA2076872@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: greybus: use __force when assigning __u8 value to snd_ctl_elem_type_tCoiby Xu1-1/+1
(struct gb_audio_ctl_elem_info*)->type has the type of __u8 so there is no concern about the byte order. __force is safe to use. Found by sparse, $ make C=2 drivers/staging/greybus/ drivers/staging/greybus/audio_topology.c:185:24: warning: cast to restricted snd_ctl_elem_type_t Suggested-by: Alex Elder <elder@linaro.org> Signed-off-by: Coiby Xu <coiby.xu@gmail.com> Link: https://lore.kernel.org/r/20201002233057.74462-3-coiby.xu@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: greybus: codecs: use SNDRV_PCM_FMTBIT_S16_LE for format bitmaskCoiby Xu1-2/+2
snd_soc_pcm_stream.formats should use the bitmask SNDRV_PCM_FMTBIT_* instead of the sequential integers SNDRV_PCM_FORMAT_* as explained by commit e712bfca1ac1f63f622f87c2f33b57608f2a4d19 ("ASoC: codecs: use SNDRV_PCM_FMTBIT_* for format bitmask"). Found by sparse, $ make C=2 drivers/staging/greybus/ drivers/staging/greybus/audio_codec.c:691:36: warning: incorrect type in initializer (different base types) drivers/staging/greybus/audio_codec.c:691:36: expected unsigned long long [usertype] formats drivers/staging/greybus/audio_codec.c:691:36: got restricted snd_pcm_format_t [usertype] drivers/staging/greybus/audio_codec.c:701:36: warning: incorrect type in initializer (different base types) drivers/staging/greybus/audio_codec.c:701:36: expected unsigned long long [usertype] formats drivers/staging/greybus/audio_codec.c:701:36: got restricted snd_pcm_format_t [usertype] Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Coiby Xu <coiby.xu@gmail.com> Link: https://lore.kernel.org/r/20201002233057.74462-2-coiby.xu@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: greybus: fix warnings about endianness detected by sparseCoiby Xu2-12/+12
This patch fix the following warnings from sparse, $ make C=2 drivers/staging/greybus/ drivers/staging/greybus/audio_module.c:222:25: warning: incorrect type in assignment (different base types) drivers/staging/greybus/audio_module.c:222:25: expected restricted __le16 [usertype] data_cport drivers/staging/greybus/audio_module.c:222:25: got unsigned short [usertype] intf_cport_id drivers/staging/greybus/audio_topology.c:460:40: warning: restricted __le32 degrades to integer drivers/staging/greybus/audio_topology.c:691:41: warning: incorrect type in assignment (different base types) drivers/staging/greybus/audio_topology.c:691:41: expected unsigned int access drivers/staging/greybus/audio_topology.c:691:41: got restricted __le32 [usertype] access drivers/staging/greybus/audio_topology.c:746:44: warning: incorrect type in assignment (different base types) drivers/staging/greybus/audio_topology.c:746:44: expected unsigned int drivers/staging/greybus/audio_topology.c:746:44: got restricted __le32 drivers/staging/greybus/audio_topology.c:748:52: warning: incorrect type in assignment (different base types) drivers/staging/greybus/audio_topology.c:748:52: expected unsigned int drivers/staging/greybus/audio_topology.c:748:52: got restricted __le32 drivers/staging/greybus/audio_topology.c:802:42: warning: restricted __le32 degrades to integer drivers/staging/greybus/audio_topology.c:805:50: warning: incorrect type in assignment (different base types) drivers/staging/greybus/audio_topology.c:805:50: expected restricted __le32 drivers/staging/greybus/audio_topology.c:805:50: got unsigned int drivers/staging/greybus/audio_topology.c:814:50: warning: restricted __le32 degrades to integer drivers/staging/greybus/audio_topology.c:817:58: warning: incorrect type in assignment (different base types) drivers/staging/greybus/audio_topology.c:817:58: expected restricted __le32 drivers/staging/greybus/audio_topology.c:817:58: got unsigned int drivers/staging/greybus/audio_topology.c:889:25: warning: incorrect type in assignment (different base types) drivers/staging/greybus/audio_topology.c:889:25: expected unsigned int access drivers/staging/greybus/audio_topology.c:889:25: got restricted __le32 [usertype] access Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Coiby Xu <coiby.xu@gmail.com> Link: https://lore.kernel.org/r/20201002233057.74462-1-coiby.xu@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: r8188eu: remove unnecessary type casts (struct wlan_bssid_ex *)Ivan Safonov5-20/+20
Reduce line length, simplify refactoring. Signed-off-by: Ivan Safonov <insafonov@gmail.com> Link: https://lore.kernel.org/r/20201004060921.8908-1-insafonov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: rtl8723bs: replace _cancel_timer with del_timer_syncRoss Schmidt4-24/+4
Replace _cancel_timer with API function del_timer_sync. One instance of del_timer_sync is moved and an unnecessary pair of spin locks are removed. Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com> Link: https://lore.kernel.org/r/20201004011743.10750-8-ross.schm.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: rtl8723bs: replace RTW_GET_BE16 with get_unaligned_be16Ross Schmidt4-6/+6
Replace RTW_GET_BE16 macro with get_unlaligned_be16. Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com> Link: https://lore.kernel.org/r/20201004011743.10750-7-ross.schm.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: rtl8723bs: replace RTW_GET_LE16 with get_unaligned_le16Ross Schmidt4-9/+9
Replace RTW_GET_LE16 macro with get_unaligned_le16. Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com> Link: https://lore.kernel.org/r/20201004011743.10750-6-ross.schm.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: rtl8723bs: replace RTW_GET_BE24 with get_unaligned_be24Ross Schmidt2-4/+2
Replace RTW_GET_BE24 macro with get_unaligned_be24. Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com> Link: https://lore.kernel.org/r/20201004011743.10750-5-ross.schm.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: rtl8723bs: remove unused macrosRoss Schmidt1-57/+0
Remove several macros in osdep_service.h because they are not used. Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com> Link: https://lore.kernel.org/r/20201004011743.10750-4-ross.schm.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: rtl8723bs: replace _RND8 with round_up()Ross Schmidt2-12/+1
Use round_up instead of inline _RND8. Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com> Link: https://lore.kernel.org/r/20201004011743.10750-3-ross.schm.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: rtl8723bs: replace _RND4 with round_up()Ross Schmidt3-13/+2
Use round_up instead of inline _RND4. Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com> Link: https://lore.kernel.org/r/20201004011743.10750-2-ross.schm.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: rtl8723bs: replace RND4 with round_up()Ross Schmidt4-9/+8
Use round_up instead of define RND4. Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com> Link: https://lore.kernel.org/r/20201004011743.10750-1-ross.schm.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05staging: qlge: fix build breakage with dumping enabledCoiby Xu3-24/+32
This fixes commit 0107635e15ac ("staging: qlge: replace pr_err with netdev_err") which introduced an build breakage of missing `struct ql_adapter *qdev` for some functions and a warning of type mismatch with dumping enabled, i.e., $ make CFLAGS_MODULE="-DQL_ALL_DUMP -DQL_OB_DUMP -DQL_CB_DUMP \ -DQL_IB_DUMP -DQL_REG_DUMP -DQL_DEV_DUMP" M=drivers/staging/qlge qlge_dbg.c: In function ‘ql_dump_ob_mac_rsp’: qlge_dbg.c:2051:13: error: ‘qdev’ undeclared (first use in this function); did you mean ‘cdev’? 2051 | netdev_err(qdev->ndev, "%s\n", __func__); | ^~~~ qlge_dbg.c: In function ‘ql_dump_routing_entries’: qlge_dbg.c:1435:10: warning: format ‘%s’ expects argument of type ‘char *’, but argument 3 has type ‘int’ [-Wformat=] 1435 | "%s: Routing Mask %d = 0x%.08x\n", | ~^ | | | char * | %d 1436 | i, value); | ~ | | | int qlge_dbg.c:1435:37: warning: format ‘%x’ expects a matching ‘unsigned int’ argument [-Wformat=] 1435 | "%s: Routing Mask %d = 0x%.08x\n", | ~~~~^ | | | unsigned int Note that now ql_dump_rx_ring/ql_dump_tx_ring won't check if the passed parameter is a null pointer. Fixes: 0107635e15ac ("staging: qlge: replace pr_err with netdev_err") Reported-by: Benjamin Poirier <benjamin.poirier@gmail.com> Suggested-by: Benjamin Poirier <benjamin.poirier@gmail.com> Reviewed-by: Benjamin Poirier <benjamin.poirier@gmail.com> Signed-off-by: Coiby Xu <coiby.xu@gmail.com> Link: https://lore.kernel.org/r/20201002235941.77062-1-coiby.xu@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-04Linux 5.9-rc8Linus Torvalds1-1/+1
2020-10-03scripts/spelling.txt: fix malformed entryEric Biggers1-1/+1
One of the entries has three fields "mistake||correction||correction" rather than the expected two fields "mistake||correction". Fix it. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/20200930234359.255295-1-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-03mm/page_alloc: handle a missing case for memalloc_nocma_{save/restore} APIsJoonsoo Kim1-3/+16
memalloc_nocma_{save/restore} APIs can be used to skip page allocation on CMA area, but, there is a missing case and the page on CMA area could be allocated even if APIs are used. This patch handles this case to fix the potential issue. For now, these APIs are used to prevent long-term pinning on the CMA page. When the long-term pinning is requested on the CMA page, it is migrated to the non-CMA page before pinning. This non-CMA page is allocated by using memalloc_nocma_{save/restore} APIs. If APIs doesn't work as intended, the CMA page is allocated and it is pinned for a long time. This long-term pin for the CMA page causes cma_alloc() failure and it could result in wrong behaviour on the device driver who uses the cma_alloc(). Missing case is an allocation from the pcplist. MIGRATE_MOVABLE pcplist could have the pages on CMA area so we need to skip it if ALLOC_CMA isn't specified. Fixes: 8510e69c8efe (mm/page_alloc: fix memalloc_nocma_{save/restore} APIs) Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Link: https://lkml.kernel.org/r/1601429472-12599-1-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-03mm, slub: restore initial kmem_cache flagsEric Farman1-5/+1
The routine that applies debug flags to the kmem_cache slabs inadvertantly prevents non-debug flags from being applied to those same objects. That is, if slub_debug=<flag>,<slab> is specified, non-debugged slabs will end up having flags of zero, and the slabs may be unusable. Fix this by including the input flags for non-matching slabs with the contents of slub_debug, so that the caches are created as expected alongside any debugging options that may be requested. With this, we can remove the check for a NULL slub_debug_string, since it's covered by the loop itself. Fixes: e17f1dfba37b ("mm, slub: extend slub_debug syntax for multiple blocks") Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Kees Cook <keescook@chromium.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Link: https://lkml.kernel.org/r/20200930161931.28575-1-farman@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-03KVM: VMX: update PFEC_MASK/PFEC_MATCH together with PF interceptPaolo Bonzini1-10/+12
The PFEC_MASK and PFEC_MATCH fields in the VMCS reverse the meaning of the #PF intercept bit in the exception bitmap when they do not match. This means that, if PFEC_MASK and/or PFEC_MATCH are set, the hypervisor can get a vmexit for #PF exceptions even when the corresponding bit is clear in the exception bitmap. This is unexpected and is promptly detected by a WARN_ON_ONCE. To fix it, reset PFEC_MASK and PFEC_MATCH when the #PF intercept is disabled (as is common with enable_ept && !allow_smaller_maxphyaddr). Reported-by: Qian Cai <cai@redhat.com>> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-02random32: Restore __latent_entropy attribute on net_rand_stateThibaut Sautereau1-1/+1
Commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity") broke compilation and was temporarily fixed by Linus in 83bdc7275e62 ("random32: remove net_rand_state from the latent entropy gcc plugin") by entirely moving net_rand_state out of the things handled by the latent_entropy GCC plugin. From what I understand when reading the plugin code, using the __latent_entropy attribute on a declaration was the wrong part and simply keeping the __latent_entropy attribute on the variable definition was the correct fix. Fixes: 83bdc7275e62 ("random32: remove net_rand_state from the latent entropy gcc plugin") Acked-by: Willy Tarreau <w@1wt.eu> Cc: Emese Revfy <re.emese@gmail.com> Signed-off-by: Thibaut Sautereau <thibaut.sautereau@ssi.gouv.fr> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-02mm: memcg/slab: fix slab statistics in !SMP configurationRoman Gushchin1-0/+5
Since commit ea426c2a7de8 ("mm: memcg: prepare for byte-sized vmstat items") the write side of slab counters accepts a value in bytes and converts it to pages. It happens in __mod_node_page_state(). However a non-SMP version of __mod_node_page_state() doesn't perform this conversion. It leads to incorrect (unrealistically high) slab counters values. Fix this by adding a similar conversion to the non-SMP version of __mod_node_page_state(). Signed-off-by: Roman Gushchin <guro@fb.com> Reported-and-tested-by: Bastian Bittorf <bb@npl.de> Fixes: ea426c2a7de8 ("mm: memcg: prepare for byte-sized vmstat items") Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-01pipe: remove pipe_wait() and fix wakeup race with spliceLinus Torvalds3-27/+48
The pipe splice code still used the old model of waiting for pipe IO by using a non-specific "pipe_wait()" that waited for any pipe event to happen, which depended on all pipe IO being entirely serialized by the pipe lock. So by checking the state you were waiting for, and then adding yourself to the wait queue before dropping the lock, you were guaranteed to see all the wakeups. Strictly speaking, the actual wakeups were not done under the lock, but the pipe_wait() model still worked, because since the waiter held the lock when checking whether it should sleep, it would always see the current state, and the wakeup was always done after updating the state. However, commit 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing") split the single wait-queue into two, and in the process also made the "wait for event" code wait for _two_ wait queues, and that then showed a race with the wakers that were not serialized by the pipe lock. It's only splice that used that "pipe_wait()" model, so the problem wasn't obvious, but Josef Bacik reports: "I hit a hang with fstest btrfs/187, which does a btrfs send into /dev/null. This works by creating a pipe, the write side is given to the kernel to write into, and the read side is handed to a thread that splices into a file, in this case /dev/null. The box that was hung had the write side stuck here [pipe_write] and the read side stuck here [splice_from_pipe_next -> pipe_wait]. [ more details about pipe_wait() scenario ] The problem is we're doing the prepare_to_wait, which sets our state each time, however we can be woken up either with reads or writes. In the case above we race with the WRITER waking us up, and re-set our state to INTERRUPTIBLE, and thus never break out of schedule" Josef had a patch that avoided the issue in pipe_wait() by just making it set the state only once, but the deeper problem is that pipe_wait() depends on a level of synchonization by the pipe mutex that it really shouldn't. And the whole "wait for any pipe state change" model really isn't very good to begin with. So rather than trying to work around things in pipe_wait(), remove that legacy model of "wait for arbitrary pipe event" entirely, and actually create functions that wait for the pipe actually being readable or writable, and can do so without depending on the pipe lock serializing everything. Fixes: 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing") Link: https://lore.kernel.org/linux-fsdevel/bfa88b5ad6f069b2b679316b9e495a970130416c.1601567868.git.josef@toxicpanda.com/ Reported-by: Josef Bacik <josef@toxicpanda.com> Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-01iommu/vt-d: Fix lockdep splat in iommu_flush_dev_iotlb()Lu Baolu1-2/+2
Lock(&iommu->lock) without disabling irq causes lockdep warnings. [ 12.703950] ======================================================== [ 12.703962] WARNING: possible irq lock inversion dependency detected [ 12.703975] 5.9.0-rc6+ #659 Not tainted [ 12.703983] -------------------------------------------------------- [ 12.703995] systemd-udevd/284 just changed the state of lock: [ 12.704007] ffffffffbd6ff4d8 (device_domain_lock){..-.}-{2:2}, at: iommu_flush_dev_iotlb.part.57+0x2e/0x90 [ 12.704031] but this lock took another, SOFTIRQ-unsafe lock in the past: [ 12.704043] (&iommu->lock){+.+.}-{2:2} [ 12.704045] and interrupts could create inverse lock ordering between them. [ 12.704073] other info that might help us debug this: [ 12.704085] Possible interrupt unsafe locking scenario: [ 12.704097] CPU0 CPU1 [ 12.704106] ---- ---- [ 12.704115] lock(&iommu->lock); [ 12.704123] local_irq_disable(); [ 12.704134] lock(device_domain_lock); [ 12.704146] lock(&iommu->lock); [ 12.704158] <Interrupt> [ 12.704164] lock(device_domain_lock); [ 12.704174] *** DEADLOCK *** Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200927062428.13713-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-10-01xen/events: don't use chip_data for legacy IRQsJuergen Gross1-8/+21
Since commit c330fb1ddc0a ("XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.") Xen is using the chip_data pointer for storing IRQ specific data. When running as a HVM domain this can result in problems for legacy IRQs, as those might use chip_data for their own purposes. Use a local array for this purpose in case of legacy IRQs, avoiding the double use. Cc: stable@vger.kernel.org Fixes: c330fb1ddc0a ("XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.") Signed-off-by: Juergen Gross <jgross@suse.com> Tested-by: Stefan Bader <stefan.bader@canonical.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20200930091614.13660-1-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2020-10-01iommu/amd: Fix the overwritten field in IVMD headerAdrian Huang1-46/+10
Commit 387caf0b759a ("iommu/amd: Treat per-device exclusion ranges as r/w unity-mapped regions") accidentally overwrites the 'flags' field in IVMD (struct ivmd_header) when the I/O virtualization memory definition is associated with the exclusion range entry. This leads to the corrupted IVMD table (incorrect checksum). The kdump kernel reports the invalid checksum: ACPI BIOS Warning (bug): Incorrect checksum in table [IVRS] - 0x5C, should be 0x60 (20200717/tbprint-177) AMD-Vi: [Firmware Bug]: IVRS invalid checksum Fix the above-mentioned issue by modifying the 'struct unity_map_entry' member instead of the IVMD header. Cleanup: The *exclusion_range* functions are not used anymore, so get rid of them. Fixes: 387caf0b759a ("iommu/amd: Treat per-device exclusion ranges as r/w unity-mapped regions") Reported-and-tested-by: Baoquan He <bhe@redhat.com> Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/20200926102602.19177-1-adrianhuang0701@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-10-01staging: rtl8188eu: clean up indent style issueMichael Straube1-1/+1
Replace spaces with tab to clear checkpatch error. ERROR: code indent should use tabs where possible Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200929062847.23985-8-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01staging: rtl8188eu: remove unused variable ratelenMichael Straube3-7/+5
After the removal of cckrates_included() and cckrates_only_included() from rtw_wlan_util.c the variable/parameter 'ratelen' is unused now. Remove it from update_wireless_mode() and judge_network_type(). Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200929062847.23985-7-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01staging: rtl8188eu: remove cckrates{only}_included()Michael Straube2-33/+4
In rtw_ieee80211.c there are rtw_is_cckrates_included() and rtw_is_cckratesonly_included() which have the same functionality as cckrates_included() and cckrates_only_included() defined in rtw_wlan_util.c. Remove the functions from rtw_wlan_util.c and use those from rtw_ieee80211.c. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200929062847.23985-6-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01staging: rtl8188eu: rename struct field bUsed -> usedMichael Straube3-5/+5
Rename field of struct rt_pmkid_list to avoid camel case. bUsed -> used Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200929062847.23985-5-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01staging: rtl8188eu: use ETH_ALENMichael Straube1-1/+1
Use ETH_ALEN instead of hard coded array size. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200929062847.23985-4-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01staging: rtl8188eu: rename struct field Bssid -> bssidMichael Straube3-6/+6
Rename field of struct rt_pmkid_list to avoid camel case. Bssid -> bssid Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200929062847.23985-3-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01staging: rtl8188eu: clean up comparsions to NULLMichael Straube1-4/+4
Clean up remaining comparsions to NULL reported by checkpatch. x == NULL -> !x x != NULL -> x Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200929062847.23985-2-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01staging: rtl8188eu: remove unused macros and definitionsMichael Straube1-58/+0
Removep unused macros and definitions from rtw_security.h leftover from previous cleanup patches. Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20200929062847.23985-1-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01staging: vchiq: Fix an uninitialized variableDan Carpenter1-1/+1
Smatch complains that "userdata" can be passed to vchiq_bulk_transfer() without being initialized. This leads to a potential information leak later on. Fixes: a4367cd2b231 ("staging: vchiq: convert compat bulk transfer") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200930123036.GC4282@kadam Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01staging: rtl8712: Fix enqueue_reorder_recvframe()Dan Carpenter1-3/+6
The logic of this function was accidentally broken by a checkpatch inspired cleanup. I've modified the code to restore the original behavior and also make checkpatch happy. Fixes: 98fe05e21a6e ("staging: rtl8712: Remove unnecesary else after return statement.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200929103548.GA493135@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01Staging: nvec: Removes repeated word typo in commentRyan Kosta1-1/+1
Fix a comment typo. Signed-off-by: Ryan Kosta <ryanpkosta@gmail.com> Link: https://lore.kernel.org/r/20200927172855.9813-1-ryanpkosta@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01KVM: arm64: Restore missing ISB on nVHE __tlb_switch_to_guestMarc Zyngier1-0/+7
Commit a0e50aa3f4a8 ("KVM: arm64: Factor out stage 2 page table data from struct kvm") dropped the ISB after __load_guest_stage2(), only leaving the one that is required when the speculative AT workaround is in effect. As Andrew points it: "This alternative is 'backwards' to avoid a double ISB as there is one in __load_guest_stage2 when the workaround is active." Restore the missing ISB, conditionned on the AT workaround not being active. Fixes: a0e50aa3f4a8 ("KVM: arm64: Factor out stage 2 page table data from struct kvm") Reported-by: Andrew Scull <ascull@google.com> Reported-by: Thomas Tai <thomas.tai@oracle.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-10-01gpio: pca953x: Correctly initialize registers 6 and 7 for PCA957xAndy Shevchenko1-1/+4
When driver has been converted to the bitmap API the non-bitmap functions started behaving differently on 32-bit BE architectures since the bytes in two consequent unsigned longs are in different order in comparison to byte array. Hence if the chip had had more than 32 lines the memset() call over it would have not set up upper lines correctly. Although it's currently a theoretical case (no supported chips of this type has 32+ lines), it's better to provide a clean code to avoid people thinking this is okay and potentially producing not fully working things. Fixes: 35d13d94893f ("gpio: pca953x: convert to use bitmap API") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20200930142013.59247-2-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-01gpio: pca953x: Use bitmap API over implicit GCC extensionAndy Shevchenko1-1/+3
In IRQ handler we have to clear bitmap before use. Currently the GCC extension has been used for that. For sake of the consistency switch to bitmap API. As expected bloat-o-meter shows no difference in the object size. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20200930142013.59247-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-01pinctrl: mediatek: check mtk_is_virt_gpio input parameterHanks Chen1-0/+4
check mtk_is_virt_gpio input parameter, virtual gpio need to support eint mode. add error handler for the ko case to fix this boot fail: pc : mtk_is_virt_gpio+0x20/0x38 [pinctrl_mtk_common_v2] lr : mtk_gpio_get_direction+0x44/0xb0 [pinctrl_paris] Fixes: edd546465002 ("pinctrl: mediatek: avoid virtual gpio trying to set reg") Signed-off-by: Hanks Chen <hanks.chen@mediatek.com> Acked-by: Sean Wang <sean.wang@kernel.org> Singed-off-by: Jie Yang <sin_jieyang@mediatek.com> Link: https://lore.kernel.org/r/1597922546-29633-1-git-send-email-hanks.chen@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-01pinctrl: qcom: sm8250: correct sdc2_clkDmitry Baryshkov1-1/+1
Correct sdc2_clk pin definition (register offset is wrong, verified by the msm-4.19 driver). Fixes: 4e3ec9e407ad ("pinctrl: qcom: Add sm8250 pinctrl driver.") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200914091846.55204-1-dmitry.baryshkov@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-30MAINTAINERS: Add Pali Rohár as aardvark PCI maintainerPali Rohár1-0/+1
Link: https://lore.kernel.org/r/20200925092115.16546-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Petazzzoni <thomas.petazzoni@bootlin.com>
2020-09-30arm64: permit ACPI core to map kernel memory used for table overridesArd Biesheuvel2-3/+21
Jonathan reports that the strict policy for memory mapped by the ACPI core breaks the use case of passing ACPI table overrides via initramfs. This is due to the fact that the memory type used for loading the initramfs in memory is not recognized as a memory type that is typically used by firmware to pass firmware tables. Since the purpose of the strict policy is to ensure that no AML or other ACPI code can manipulate any memory that is used by the kernel to keep its internal state or the state of user tasks, we can relax the permission check, and allow mappings of memory that is reserved and marked as NOMAP via memblock, and therefore not covered by the linear mapping to begin with. Fixes: 1583052d111f ("arm64/acpi: disallow AML memory opregions to access kernel memory") Fixes: 325f5585ec36 ("arm64/acpi: disallow writeable AML opregion mapping for EFI code regions") Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20200929132522.18067-1-ardb@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-09-30RISC-V: Check clint_time_val before useAnup Patel2-4/+13
The NoMMU kernel is broken for QEMU virt machine from Linux-5.9-rc6 because clint_time_val is used even before CLINT driver is probed at following places: 1. rand_initialize() calls get_cycles() which in-turn uses clint_time_val 2. boot_init_stack_canary() calls get_cycles() which in-turn uses clint_time_val The issue#1 (above) is fixed by providing custom random_get_entropy() for RISC-V NoMMU kernel. For issue#2 (above), we remove dependency of boot_init_stack_canary() on get_cycles() and this is aligned with the boot_init_stack_canary() implementations of ARM, ARM64 and MIPS kernel. Fixes: d5be89a8d118 ("RISC-V: Resurrect the MMIO timer implementation for M-mode systems") Signed-off-by: Anup Patel <anup.patel@wdc.com> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-09-30btrfs: fix filesystem corruption after a device replaceFilipe Manana1-1/+39
We use a device's allocation state tree to track ranges in a device used for allocated chunks, and we set ranges in this tree when allocating a new chunk. However after a device replace operation, we were not setting the allocated ranges in the new device's allocation state tree, so that tree is empty after a device replace. This means that a fitrim operation after a device replace will trim the device ranges that have allocated chunks and extents, as we trim every range for which there is not a range marked in the device's allocation state tree. It is also important during chunk allocation, since the device's allocation state is used to determine if a range is already allocated when allocating a new chunk. This is trivial to reproduce and the following script triggers the bug: $ cat reproducer.sh #!/bin/bash DEV1="/dev/sdg" DEV2="/dev/sdh" DEV3="/dev/sdi" wipefs -a $DEV1 $DEV2 $DEV3 &> /dev/null # Create a raid1 test fs on 2 devices. mkfs.btrfs -f -m raid1 -d raid1 $DEV1 $DEV2 > /dev/null mount $DEV1 /mnt/btrfs xfs_io -f -c "pwrite -S 0xab 0 10M" /mnt/btrfs/foo echo "Starting to replace $DEV1 with $DEV3" btrfs replace start -B $DEV1 $DEV3 /mnt/btrfs echo echo "Running fstrim" fstrim /mnt/btrfs echo echo "Unmounting filesystem" umount /mnt/btrfs echo "Mounting filesystem in degraded mode using $DEV3 only" wipefs -a $DEV1 $DEV2 &> /dev/null mount -o degraded $DEV3 /mnt/btrfs if [ $? -ne 0 ]; then dmesg | tail echo echo "Failed to mount in degraded mode" exit 1 fi echo echo "File foo data (expected all bytes = 0xab):" od -A d -t x1 /mnt/btrfs/foo umount /mnt/btrfs When running the reproducer: $ ./replace-test.sh wrote 10485760/10485760 bytes at offset 0 10 MiB, 2560 ops; 0.0901 sec (110.877 MiB/sec and 28384.5216 ops/sec) Starting to replace /dev/sdg with /dev/sdi Running fstrim Unmounting filesystem Mounting filesystem in degraded mode using /dev/sdi only mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/sdi, missing codepage or helper program, or other error. [19581.748641] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi started [19581.803842] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi finished [19582.208293] BTRFS info (device sdi): allowing degraded mounts [19582.208298] BTRFS info (device sdi): disk space caching is enabled [19582.208301] BTRFS info (device sdi): has skinny extents [19582.212853] BTRFS warning (device sdi): devid 2 uuid 1f731f47-e1bb-4f00-bfbb-9e5a0cb4ba9f is missing [19582.213904] btree_readpage_end_io_hook: 25839 callbacks suppressed [19582.213907] BTRFS error (device sdi): bad tree block start, want 30490624 have 0 [19582.214780] BTRFS warning (device sdi): failed to read root (objectid=7): -5 [19582.231576] BTRFS error (device sdi): open_ctree failed Failed to mount in degraded mode So fix by setting all allocated ranges in the replace target device when the replace operation is finishing, when we are holding the chunk mutex and we can not race with new chunk allocations. A test case for fstests follows soon. Fixes: 1c11b63eff2a67 ("btrfs: replace pending/pinned chunks lists with io tree") CC: stable@vger.kernel.org # 5.2+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.