| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The call to synchronize_srcu() from rcu_tasks_postscan() can be stalled
by a task getting stuck in do_exit() between that function's calls to
exit_tasks_rcu_start() and exit_tasks_rcu_finish(). To ease diagnosis
of this situation, print a stall warning message every rcu_task_stall_info
period when rcu_tasks_postscan() is stalled.
[ paulmck: Adjust to handle CONFIG_SMP=n. ]
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reported-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/rcu/20230111212736.GA1062057@paulmck-ThinkPad-P17-Gen-1/
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
According to the commit log of the patch that added it to the kernel,
start_poll_synchronize_rcu_expedited() can be invoked very early, as
in long before rcu_init() has been invoked. But before rcu_init(),
the rcu_data structure's ->mynode field has not yet been initialized.
This means that the start_poll_synchronize_rcu_expedited() function's
attempt to set the CPU's leaf rcu_node structure's ->exp_seq_poll_rq
field will result in a segmentation fault.
This commit therefore causes start_poll_synchronize_rcu_expedited() to
set ->exp_seq_poll_rq only after rcu_init() has initialized all CPUs'
rcu_data structures' ->mynode fields. It also removes the check from
the rcu_init() function so that start_poll_synchronize_rcu_expedited(
is unconditionally invoked. Yes, this might result in an unnecessary
boot-time grace period, but this is down in the noise.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
The rcu_accelerate_cbs() function is invoked by rcu_report_qs_rdp()
only if there is a grace period in progress that is still blocked
by at least one CPU on this rcu_node structure. This means that
rcu_accelerate_cbs() should never return the value true, and thus that
this function should never set the needwake variable and in turn never
invoke rcu_gp_kthread_wake().
This commit therefore removes the needwake variable and the invocation
of rcu_gp_kthread_wake() in favor of a WARN_ON_ONCE() on the call to
rcu_accelerate_cbs(). The purpose of this new WARN_ON_ONCE() is to
detect situations where the system's opinion differs from ours.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
The lazy_rcu_shrink_count() shrinker function is registered even in
kernels built with CONFIG_RCU_LAZY=n, in which case this function
uselessly consumes cycles learning that no CPU has any lazy callbacks
queued.
This commit therefore registers this shrinker function only in the kernels
built with CONFIG_RCU_LAZY=y, where it might actually do something useful.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
This commit adds checks for the TICK_DEP_MASK_RCU_EXP bit, thus enabling
RCU expedited grace periods to actually force-enable scheduling-clock
interrupts on holdout CPUs.
Fixes: df1e849ae455 ("rcu: Enable tick for nohz_full CPUs slow to provide expedited QS")
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
For kernels built with CONFIG_NO_HZ_FULL=y, the following scenario can result
in the scheduling-clock interrupt remaining enabled on a holdout CPU after
its quiescent state has been reported:
CPU1 CPU2
rcu_report_exp_cpu_mult synchronize_rcu_expedited_wait
acquires rnp->lock mask = rnp->expmask;
for_each_leaf_node_cpu_mask(rnp, cpu, mask)
rnp->expmask = rnp->expmask & ~mask; rdp = per_cpu_ptr(&rcu_data, cpu1);
for_each_leaf_node_cpu_mask(rnp, cpu, mask)
rdp = per_cpu_ptr(&rcu_data, cpu1);
if (!rdp->rcu_forced_tick_exp)
continue; rdp->rcu_forced_tick_exp = true;
tick_dep_set_cpu(cpu1, TICK_DEP_BIT_RCU_EXP);
The problem is that CPU2's sampling of rnp->expmask is obsolete by the
time it invokes tick_dep_set_cpu(), and CPU1 is not guaranteed to see
CPU2's store to ->rcu_forced_tick_exp in time to clear it. And even if
CPU1 does see that store, it might invoke tick_dep_clear_cpu() before
CPU2 got around to executing its tick_dep_set_cpu(), which would still
leave the victim CPU with its scheduler-clock tick running.
Either way, an nohz_full real-time application running on the victim
CPU would have its latency needlessly degraded.
Note that expedited RCU grace periods look at context-tracking
information, and so if the CPU is executing in nohz_full usermode
throughout, that CPU cannot be victimized in this manner.
This commit therefore causes synchronize_rcu_expedited_wait to hold
the rcu_node structure's ->lock when checking for holdout CPUs, setting
TICK_DEP_BIT_RCU_EXP, and invoking tick_dep_set_cpu(), thus preventing
this race.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
This commit saves a line of code by switching from strncpy() to strscpy()
by permitting the later NUL assignment to be removed. While in the area,
save another line by taking advantage of 100 characters.
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
For CONFIG_NO_HZ_FULL systems, the tick_do_timer_cpu cannot be offlined.
However, cpu_is_hotpluggable() still returns true for those CPUs. This causes
torture tests that do offlining to end up trying to offline this CPU causing
test failures. Such failure happens on all architectures.
Fix the repeated error messages thrown by this (even if the hotplug errors are
harmless) by asking the opinion of the nohz subsystem on whether the CPU can be
hotplugged.
[ Apply Frederic Weisbecker feedback on refactoring tick_nohz_cpu_down(). ]
For drivers/base/ portion:
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: rcu <rcu@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: 2987557f52b9 ("driver-core/cpu: Expose hotpluggability to the rest of the kernel")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
I have spent about two years studying and contributing to RCU,
and sharing RCU-related knowledge within my team, if possible,
please consider me as R ;-).
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
Just to be clear, the "M:" tag before my name is short of "Minions" ;-)
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
I have spent years learning / contributing to RCU with several features,
talks and presentations, with my most recent work being on Lazy-RCU.
Please consider me for M, so I can tell my wife why I spend a lot of my
weekends and evenings on this complicated and mysterious thing -- which is
mostly in the hopes of preventing the world from burning down because
everything runs on this one way or another. ;-)
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <x86@kernel.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements from the various KVM Kconfig files.
Acked-by: Sean Christopherson <seanjc@google.com> (x86)
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <kvm@vger.kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org> (arm64)
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Anup Patel <anup@brainfault.org> (riscv)
Acked-by: Heiko Carstens <hca@linux.ibm.com> (s390)
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <linux-mm@kvack.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
Now that all references to CONFIG_SRCU have been removed, it is time to
remove CONFIG_SRCU itself.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
|
|
|
|
Commit aa47a7c215e7 ("lib/cpumask: deprecate nr_cpumask_bits") resulted
in the cpumask operations potentially becoming hugely less efficient,
because suddenly the cpumask was always considered to be variable-sized.
The optimization was then later added back in a limited form by commit
6f9c07be9d02 ("lib/cpumask: add FORCE_NR_CPUS config option"), but that
FORCE_NR_CPUS option is not useful in a generic kernel and more of a
special case for embedded situations with fixed hardware.
Instead, just re-introduce the optimization, with some changes.
Instead of depending on CPUMASK_OFFSTACK being false, and then always
using the full constant cpumask width, this introduces three different
cpumask "sizes":
- the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids.
This is used for situations where we should use the exact size.
- the "small" size (small_cpumask_bits) is the NR_CPUS constant if it
fits in a single word and the bitmap operations thus end up able
to trigger the "small_const_nbits()" optimizations.
This is used for the operations that have optimized single-word
cases that get inlined, notably the bit find and scanning functions.
- the "large" size (large_cpumask_bits) is the NR_CPUS constant if it
is an sufficiently small constant that makes simple "copy" and
"clear" operations more efficient.
This is arbitrarily set at four words or less.
As a an example of this situation, without this fixed size optimization,
cpumask_clear() will generate code like
movl nr_cpu_ids(%rip), %edx
addq $63, %rdx
shrq $3, %rdx
andl $-8, %edx
callq memset@PLT
on x86-64, because it would calculate the "exact" number of longwords
that need to be cleared.
In contrast, with this patch, using a MAX_CPU of 64 (which is quite a
reasonable value to use), the above becomes a single
movq $0,cpumask
instruction instead, because instead of caring to figure out exactly how
many CPU's the system has, it just knows that the cpumask will be a
single word and can just clear it all.
Note that this does end up tightening the rules a bit from the original
version in another way: operations that set bits in the cpumask are now
limited to the actual nr_cpu_ids limit, whereas we used to do the
nr_cpumask_bits thing almost everywhere in the cpumask code.
But if you just clear bits, or scan for bits, we can use the simpler
compile-time constants.
In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()'
which were not useful, and which fundamentally have to be limited to
'nr_cpu_ids'. Better remove them now than have somebody introduce use
of them later.
Of course, on x86-64 with MAXSMP there is no sane small compile-time
constant for the cpumask sizes, and we end up using the actual CPU bits,
and will generate the above kind of horrors regardless. Please don't
use MAXSMP unless you really expect to have machines with thousands of
cores.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
include/linux/compiler-intel.h had no update in the past 3 years.
We often forget about the third C compiler to build the kernel.
For example, commit a0a12c3ed057 ("asm goto: eradicate CC_HAS_ASM_GOTO")
only mentioned GCC and Clang.
init/Kconfig defines CC_IS_GCC and CC_IS_CLANG but not CC_IS_ICC,
and nobody has reported any issue.
I guess the Intel Compiler support is broken, and nobody is caring
about it.
Harald Arnesen pointed out ICC (classic Intel C/C++ compiler) is
deprecated:
$ icc -v
icc: remark #10441: The Intel(R) C++ Compiler Classic (ICC) is
deprecated and will be removed from product release in the second half
of 2023. The Intel(R) oneAPI DPC++/C++ Compiler (ICX) is the recommended
compiler moving forward. Please transition to use this compiler. Use
'-diag-disable=10441' to disable this message.
icc version 2021.7.0 (gcc version 12.1.0 compatibility)
Arnd Bergmann provided a link to the article, "Intel C/C++ compilers
complete adoption of LLVM".
lib/zstd/common/compiler.h and lib/zstd/compress/zstd_fast.c were kept
untouched for better sync with https://github.com/facebook/zstd
Link: https://www.intel.com/content/www/us/en/developer/articles/technical/adoption-of-llvm-complete-icx.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The migration code ends up temporarily stashing information of the wrong
type in unused fields of the newly allocated destination folio. That
all works fine, but gcc does complain about the pointer type mis-use:
mm/migrate.c: In function ‘__migrate_folio_extract’:
mm/migrate.c:1050:20: note: randstruct: casting between randomized structure pointer types (ssa): ‘struct anon_vma’ and ‘struct address_space’
1050 | *anon_vmap = (void *)dst->mapping;
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
and gcc is actually right to complain since it really doesn't understand
that this is a very temporary special case where this is ok.
This could be fixed in different ways by just obfuscating the assignment
sufficiently that gcc doesn't see what is going on, but the truly
"proper C" way to do this is by explicitly using a union.
Using unions for type conversions like this is normally hugely ugly and
syntactically nasty, but this really is one of the few cases where we
want to make it clear that we're not doing type conversion, we're really
re-using the value bit-for-bit just using another type.
IOW, this should not become a common pattern, but in this one case using
that odd union is probably the best way to document to the compiler what
is conceptually going on here.
[ Side note: there are valid cases where we convert pointers to other
pointer types, notably the whole "folio vs page" situation, where the
types actually have fundamental commonalities.
The fact that the gcc note is limited to just randomized structures
means that we don't see equivalent warnings for those cases, but it
migth also mean that we miss other cases where we do play these kinds
of dodgy games, and this kind of explicit conversion might be a good
idea. ]
I verified that at least for an allmodconfig build on x86-64, this
generates the exact same code, apart from line numbers and assembler
comment changes.
Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()")
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The usermodehelper code uses two fake pointers for the two capability
cases: CAP_BSET for reading and writing 'usermodehelper_bset', and
CAP_PI to read and write 'usermodehelper_inheritable'.
This seems to be a completely unnecessary indirection, since we could
instead just use the pointers themselves, and never have to do any "if
this then that" kind of logic.
So just get rid of the fake pointer values, and use the real pointer
values instead.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is passing IS_ERR() instead of PTR_ERR() so instead of an error
code it prints and returns the number 1.
Fixes: 4a55ed6f89f5 ("i2c: Add GXP SoC I2C Controller")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
According to Documentation/i2c/fault-codes.rst, NACK after sending an
address should be -ENXIO.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
There used to be error messages which had to go. Now, it only consists
of 'break's, so it can go.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The ppc64le_allmodconfig sets I2C_PASEMI=y and leaves COMPILE_TEST to
default to y and I2C_APPLE to default to m, running into a known
incompatible configuration that breaks the build [1]. Specifically,
a common dependency (i2c-pasemi-core.o in this case) cannot be used by
both builtin and module consumers.
Disable I2C_APPLE when I2C_PASEMI is a builtin to prevent this.
[1]: https://lore.kernel.org/all/202112061809.XT99aPrf-lkp@intel.com
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
If the check (id != 0x41) fails, then id == 0x41 and
the other check in 'else' branch also
fails: id & 0x0F = 0b01000001 & 0b00001111 = 0b00000001.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dmitry Fomin <fomindmitriyfoma@mail.ru>
Link: https://lore.kernel.org/r/20230225184322.6286-2-fomindmitriyfoma@mail.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If snd_ctl_add() fails in aureon_add_controls(), it immediately returns
and leaves ice->gpio_mutex locked. ice->gpio_mutex locks in
snd_ice1712_save_gpio_status and unlocks in
snd_ice1712_restore_gpio_status(ice).
It seems that the mutex is required only for aureon_cs8415_get(),
so snd_ice1712_restore_gpio_status(ice) can be placed
just after that. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dmitry Fomin <fomindmitriyfoma@mail.ru>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230225184322.6286-1-fomindmitriyfoma@mail.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
HP EliteDesk 800 G6 Tower PC (103c:870c) requires a quirk for enabling
headset-mic.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217008
Link: https://lore.kernel.org/r/20230223074749.1026060-1-l.stelmach@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The headset jack works better with model=alc283-dac-wcaps. Without this
option, the headset insertion (separate physical jack) may not be handled
correctly (re-insertion is required).
It seems that it follows the "Intel Reference Board" defaults.
Reported-by: steven_wu2@dell.com
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230221102157.515852-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit 104ff59af73a ("ata: ahci: Add Tiger Lake UP{3,4} AHCI
controller") enabled low power mode for the Tiger Lake AHIC adapter in
the author system but created regressions for others. Revert this patch
for now until a better solution is found to make this adapter
eco-friendly.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217114
CC: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Dikshita's old email is still picked up by the likes of get_maintainer.pl
and keeps bouncing. Map it to his current one.
Link: https://lkml.kernel.org/r/20230228153335.907164-2-konrad.dybcio@linaro.org
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Dikshita Agarwal <dikshita@qti.qualcomm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Vikash's old email is still picked up by the likes of get_maintainer.pl
and keeps bouncing. Map it to his current one.
Link: https://lkml.kernel.org/r/20230228153335.907164-3-konrad.dybcio@linaro.org
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
file_ra_state_init() assumes that the file_ra_state has been zeroed out.
Fixes a KMSAN used-unintialized issue (at least).
Fixes: cf948cbc35e80 ("cramfs: read_mapping_page() is synchronous")
Reported-by: syzbot <syzbot+8ce7f8308d91e6b8bbe2@syzkaller.appspotmail.com>
Link: https://lkml.kernel.org/r/0000000000008f74e905f56df987@google.com
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current hfsplus_put_super first calls hfs_btree_close on
sbi->ext_tree, then invokes iput on sbi->hidden_dir, resulting in an
use-after-free issue in hfsplus_release_folio.
As shown in hfsplus_fill_super, the error handling code also calls iput
before hfs_btree_close.
To fix this error, we move all iput calls before hfsplus_btree_close.
Note that this patch is tested on Syzbot.
Link: https://lkml.kernel.org/r/20230226124948.3175736-1-mudongliangabcd@gmail.com
Reported-by: syzbot+57e3e98f7e3b80f64d56@syzkaller.appspotmail.com
Tested-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 8d470a45d1a6 ("panic: add option to dump all CPUs backtraces in
panic_print") introduced a setting for the "panic_print" kernel parameter
to allow users to request a NMI backtrace on panic. Problem is that the
panic_print handling happens after the secondary CPUs are already
disabled, hence this option ended-up being kind of a no-op - kernel skips
the NMI trace in idling CPUs, which is the case of offline CPUs.
Fix it by checking the NMI backtrace bit in the panic_print prior to the
CPU disabling function.
Link: https://lkml.kernel.org/r/20230226160838.414257-1-gpiccoli@igalia.com
Fixes: 8d470a45d1a6 ("panic: add option to dump all CPUs backtraces in panic_print")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: <stable@vger.kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit 67222c4ba8af ("lib: parser: optimize match_NUMBER apis to use local
array") removed -ENOMEM as a possible return value, so update the comments
accordingly.
Link: https://lkml.kernel.org/r/20230224042618.9092-1-ebiggers@kernel.org
Fixes: 67222c4ba8af ("lib: parser: optimize match_NUMBER apis to use local array")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Li Lingfeng <lilingfeng3@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that memcpy/memset/memmove are no longer overridden by KASAN, we can
just use the normal symbol names in uninstrumented files.
Drop the preprocessor redefinitions.
Link: https://lkml.kernel.org/r/20230224085942.1791837-4-elver@google.com
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The tests for memset/memmove have been failing since they haven't been
instrumented in 69d4c0d32186.
Fix the test to recognize when memintrinsics aren't instrumented, and skip
test cases accordingly. We also need to conditionally pass -fno-builtin
to the test, otherwise the instrumentation pass won't recognize
memintrinsics and end up not instrumenting them either.
Link: https://lkml.kernel.org/r/20230224085942.1791837-3-elver@google.com
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Where the compiler instruments meminstrinsics by generating calls to
__asan/__hwasan_ prefixed functions, let the compiler consider
memintrinsics as builtin again.
To do so, never override memset/memmove/memcpy if the compiler does the
correct instrumentation - even on !GENERIC_ENTRY architectures.
[elver@google.com: powerpc: don't rename memintrinsics if compiler adds prefixes]
Link: https://lore.kernel.org/all/20230224085942.1791837-1-elver@google.com/ [1]
Link: https://lkml.kernel.org/r/20230227094726.3833247-1-elver@google.com
Link: https://lkml.kernel.org/r/20230224085942.1791837-2-elver@google.com
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Clang 15 provides an option to prefix memcpy/memset/memmove calls with
__asan_/__hwasan_ in instrumented functions:
https://reviews.llvm.org/D122724
GCC will add support in future:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108777
Use it to regain KASAN instrumentation of memcpy/memset/memmove on
architectures that require noinstr to be really free from instrumented
mem*() functions (all GENERIC_ENTRY architectures).
Link: https://lkml.kernel.org/r/20230224085942.1791837-1-elver@google.com
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: kasan-dev@googlegroups.com
Cc: Kees Cook <keescook@chromium.org>
Cc: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org> # build only
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The block layer might merge together discard requests up until the
max_discard_segments limit is hit, but blk_insert_cloned_request checks
the segment count against max_segments regardless of the req op. This
can result in errors like the following when discards are issued through
a DM device and max_discard_segments exceeds max_segments for the queue
of the chosen underlying device.
blk_insert_cloned_request: over max segments limit. (256 > 129)
Fix this by looking at the req_op and enforcing the appropriate segment
limit - max_discard_segments for REQ_OP_DISCARDs and max_segments for
everything else.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230301000655.48112-1-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To address this build error:
BINDGEN rust/bindings/bindings_generated.rs
BINDGEN rust/bindings/bindings_helpers_generated.rs
EXPORTS rust/exports_core_generated.h
RUSTC P rust/libmacros.so
RUSTC L rust/compiler_builtins.o
RUSTC L rust/alloc.o
RUSTC L rust/bindings.o
RUSTC L rust/build_error.o
EXPORTS rust/exports_alloc_generated.h
error[E0588]: packed type cannot transitively contain a `#[repr(align)]` type
--> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10094:1
|
10094 | / pub struct alt_instr {
10095 | | pub instr_offset: s32,
10096 | | pub repl_offset: s32,
10097 | | pub __bindgen_anon_1: alt_instr__bindgen_ty_1,
10098 | | pub instrlen: u8_,
10099 | | pub replacementlen: u8_,
10100 | | }
| |_^
|
note: `alt_instr__bindgen_ty_1__bindgen_ty_1` has a `#[repr(align)]` attribute
--> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10111:1
|
10111 | / pub struct alt_instr__bindgen_ty_1__bindgen_ty_1 {
10112 | | pub _bitfield_1: __BindgenBitfieldUnit<[u8; 4usize], u16>,
10113 | | }
| |_^
note: `alt_instr` contains a field of type `alt_instr__bindgen_ty_1`
--> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10097:9
|
10097 | pub __bindgen_anon_1: alt_instr__bindgen_ty_1,
| ^^^^^^^^^^^^^^^^
note: ...which contains a field of type `alt_instr__bindgen_ty_1__bindgen_ty_1`
--> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10104:9
|
10104 | pub __bindgen_anon_1: alt_instr__bindgen_ty_1__bindgen_ty_1,
| ^^^^^^^^^^^^^^^^
error: aborting due to previous error
For more information about this error, try `rustc --explain E0588`.
make[1]: *** [rust/Makefile:389: rust/bindings.o] Error 1
make: *** [Makefile:1293: prepare] Error 2
Cc: Derek Barbosa <debarbos@redhat.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes: 5d1dd961e743 ("x86/alternatives: Add alt_instr.flags")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
openrisc equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
nios2 equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
microblaze equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
ia64 equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
sparc equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
alpha equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
parisc equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
hexagon equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Acked-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
Neeraj Upadhyay
Zqiang
Xu Panda
Joel Fernandes (Google)
Boqun Feng
Paul E. McKenney
Linus Torvalds
Masahiro Yamada
Al Viro
Dan Carpenter
Wolfram Sang
Benjamin Gray
Dmitry Fomin
Łukasz Stelmach
Jaroslav Kysela
Damien Le Moal
Konrad Dybcio
Andrew Morton
Dongliang Mu
Guilherme G. Piccoli
Eric Biggers
Marco Elver
Uday Shankar
Arnaldo Carvalho de Melo