aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-28ARM: dts: imx6qdl-apf6dev: add backlight supportSébastien Szymanski1-0/+8
Add PWM backlight support. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-apf6dev: rename usb-h1-vbus regulator to 5VSébastien Szymanski1-3/+5
This regulator supplies other devices and not only usb host1 so rename it. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-apf6dev: add RTC supportSébastien Szymanski1-0/+5
Add support of MCP79400 RTC. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-apf6: fix WiFiSébastien Szymanski1-2/+26
These changes make the WiFi on the APF6 board work again. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-apf6: add flow control to uart2Sébastien Szymanski1-0/+1
RTS/CTS lines are wired to the Bluetooth chip so add uart-has-rtscts property to uart2. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-apf6: add phy to fecSébastien Szymanski1-0/+14
Add the mdio bus and the phy to the fec-node. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-{apf6, apf6dev}: remove container node around pinctrl nodesSébastien Szymanski2-211/+207
Remove the function node around the pinctrl nodes that was obsoleted by commit 5fcdf6a7ed95 ("pinctrl: imx: Allow parsing DT without function nodes"). Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-{apf6, apf6dev}: switch boards to SPDX identifierSébastien Szymanski4-184/+12
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-zii-rdu2: Specify supplies for accelerometerAndrey Smirnov1-0/+2
Specify 'vdd' and 'vddio' supplies for accelerometer to avoid warnings during boot. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: linux-arm-kernel@lists.infradead.org, Cc: linux-kernel@vger.kernel.org Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6qdl-zii-rdu2: Fix accelerometer interrupt-namesAndrey Smirnov1-3/+2
According to Documentation/devicetree/bindings/iio/accel/mma8452.txt, the correct interrupt-names are "INT1" and "INT2", so fix them accordingly. While at it, modify the node to only specify "INT2" since providing two interrupts is not necessary or useful (the driver will only use one). Signed-off-by: Fabio Estevam <festevam@gmail.com> [andrew.smirnov@gmail.com modified the patch to drop INT1] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: linux-arm-kernel@lists.infradead.org, Cc: linux-kernel@vger.kernel.org Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx7ulp: Move usdhc clocks assignment to board DTAnson Huang2-4/+2
usdhc's clock rate is different according to different devices connected, so clock rate assignment should be placed in board DT according to different devices connected on each usdhc port. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: vf-colibri: add recovery mode to i2cPhilippe Schenker1-1/+11
This patch enables the recovery mode now available. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx*(colibri|apalis): add missing recovery modes to i2cPhilippe Schenker2-9/+39
This patch adds missing i2c recovery modes and corrects wrongly named ones. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6dl-yapp4: Enable the I2C3 bus on all board variantsMichal Vokáč2-5/+1
imx6dl-yapp4 Draco and Ursa boards use the I2C3 bus to control some external devices through the /dev files. So enable the I2C3 bus on all board variants, not just on Hydra. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-28ARM: dts: imx6dl-yapp4: Enable UART2Michal Vokáč1-0/+13
The second UART is needed for 3D or MFD printer control. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-26ARM: dts: imx6qdl-rex: add gpio expander pca9535Gilles DOFFE1-0/+19
The pca9535 gpio expander is present on the Rex baseboard, but missing from the dtsi. The pca9535 is on i2c2 bus which is common to the three SOM variants (Basic/Pro/Ultra), thus it is activated by default. Add also the new gpio controller and the associated interrupt line MX6QDL_PAD_NANDF_CS3__GPIO6_IO16. Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-26ARM: dts: imx6ul-14x14-evk.dtsi: configure USBOTG1 ID pinctrlPeter Chen1-0/+8
Without configuring this pinctrl, the ID value can't be got correctly, then, the dual-role switch can't work well. Signed-off-by: Peter Chen <peter.chen@nxp.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25ARM: dts: Disable DMA support on the BK4 vf610 device's fsl_lpuartLukasz Majewski1-0/+4
This change disables the DMA support (RX/TX) on the NXP's fsl_lpuart driver - the PIO mode is used instead. This change is necessary for better robustness of BK4's device use cases with many potentially interrupted short serial transfers. Without it the driver hangs when some distortion happens on UART lines. Signed-off-by: Lukasz Majewski <lukma@denx.de> Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25ARM: dts: imx6q-gw54xx: Do not use 'simple-audio-card,dai-link'Fabio Estevam1-11/+8
According to Documentation/devicetree/bindings/sound/simple-card.txt the 'simple-audio-card,dai-link' may be omitted when the card has only one DAI link, which is the case here. Get rid of 'simple-audio-card,dai-link' in order to fix the following build warning with W=1: arch/arm/boot/dts/imx6q-gw54xx.dts:19.32-31.5: Warning (unit_address_vs_reg): /sound-digital/simple-audio-card,dai-link@0: node has a unit name, but no reg property Cc: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25ARM: dts: imx6dl-yapp4: Enable the MPR121 touchkey controller on HydraMichal Vokáč2-0/+17
Add the touch keyboard present on Hydra board. The controller is connected only using I2C lines. The interrupt line is not available hence we use the polling mode. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-25ARM: dts: imx: Rename "iram" node to "sram"Krzysztof Kozlowski3-3/+3
The device node name should reflect generic class of a device so rename the "iram" node to "sram". This will be also in sync with upcoming DT schema. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-14ARM: dts: vf610-zii-scu4-aib: Remove internal debug network interfacesFabio Estevam1-10/+0
"internal_j8" and "internal_j9" are network interfaces that are not exposed outside the board and were only ever used for debugging purposes. Get rid of them as they are not needed. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-07ARM: dts: imx6qdl-wandboard: add ethernet PHY descriptionAnatolij Gustschin1-0/+10
Wandboard devicetrees lack the ethernet PHY description, add it. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-07ARM: dts: imx6q-dhcom: Enable CAN in board DTSMarek Vasut2-2/+8
Move the CAN enablement from SoM DTSi to board DTS, as each board might need different CAN configuration. Moreover, disable CAN2 on the PDK2 as it is not available on any connector. This also fixes on-SoM SD slot operation, as it shares pins with the CAN2. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Ludwig Zenz <lzenz@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: NXP Linux Team <linux-imx@nxp.com> To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06ARM: dts: imx7d: Add opp-suspend propertyAnson Huang1-0/+3
Add "opp-suspend" property for i.MX7D to make sure system suspend with max available opp. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06ARM: dts: imx7d: Correct speed grading fuse settingsAnson Huang1-1/+1
The 800MHz opp speed grading fuse mask should be 0xd instead of 0xf according to fuse map definition: SPEED_GRADING[1:0] MHz 00 800 01 500 10 1000 11 1200 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06ARM: dts: imx6qdl-gw551x: Do not use 'simple-audio-card,dai-link'Fabio Estevam1-11/+8
According to Documentation/devicetree/bindings/sound/simple-card.txt the 'simple-audio-card,dai-link' may be omitted when the card has only one DAI link, which is the case here. Get rid of 'simple-audio-card,dai-link' in order to fix the following build warning with W=1: arch/arm/boot/dts/imx6qdl-gw551x.dtsi:109.32-121.5: Warning (unit_address_vs_reg): /sound-digital/simple-audio-card,dai-link@0: node has a unit name, but no reg property Cc: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06ARM: dts: imx6ul-phytec-phycore-som: Add missing unit nameFabio Estevam1-1/+1
Pass the memory unit name in order to fix the following build warning with W=1: arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi:23.9-26.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name Cc: Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06ARM: dts: imx: Replace "simple-bus" with "simple-mfd" for anatopFabio Estevam5-5/+5
Replace "simple-bus" with "simple-mfd" for anatop node in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx6sx.dtsi:603.31-616.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-1p1: missing or empty reg/ranges property arch/arm/boot/dts/imx6sx.dtsi:618.31-631.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-3p0: missing or empty reg/ranges property arch/arm/boot/dts/imx6sx.dtsi:633.31-646.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-2p5: missing or empty reg/ranges property arch/arm/boot/dts/imx6sx.dtsi:648.32-663.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddcore: missing or empty reg/ranges property arch/arm/boot/dts/imx6sx.dtsi:665.33-679.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddpcie: missing or empty reg/ranges property arch/arm/boot/dts/imx6sx.dtsi:681.31-696.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddsoc: missing or empty reg/ranges property Based on a patch from Marco Felsch for the imx6qdl.dtsi. Cc: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-03ARM: dts: imx7ulp: Add wdog1 nodeAnson Huang1-0/+10
Add wdog1 node to support watchdog driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6qdl-udoo: Add Pincfgs for OTGMarkus Kueffner1-0/+14
Add Pincfgs to enable the i.MX6's OTG feature for UDOO Signed-off-by: Markus Kueffner <kueffner.markus@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6ull-colibri: Add general wakeup key used on ColibriPhilippe Schenker1-0/+14
This adds the possibility to wake the module with an external signal as defined in the Colibri standard Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6ull: improve can templatesMax Krummenacher3-4/+28
Add the pinmuxing and a inactive node for flexcan1 on SODIMM 55/63 and move the inactive flexcan nodes to imx6ull-colibri-eval-v3.dtsi where they belong. Note that this commit does not enable flexcan functionality, but rather eases the effort needed to do so. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6ull-colibri: Add watchdogPhilippe Schenker1-0/+12
This patch adds the watchdog to the imx6ull-colibri devicetree Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6ull-colibri: reduce v_batt current in power offMax Krummenacher1-3/+3
Reduce the current drawn from VCC_BATT when the main power on the 3V3 pins to the module are switched off. This switches off SoC internal pull resistors which are provided on the module for TAMPER7 and TAMPER9 SoC pin and switches on a pull down instead of a pullup for the USBC_DET module pin (TAMPER2). Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6ull-colibri: Add sleep mode to fecPhilippe Schenker1-1/+17
Do not change the clock as the power for this phy is switched with that clock. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6-colibri: Add missing pinmuxing to Toradex eval boardPhilippe Schenker1-0/+8
This patch adds some missing pinmuxing that is in the colibri standard to the dts. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6-apalis: Add touchscreens used on Toradex eval boardsPhilippe Schenker4-0/+70
This commit adds the touchscreen from Toradex so one can enable it. It is disabled by default because the pins are also used for PWM<B>, PWM<C>, aka pwm2, pwm3 which is the standard use for colibri boards. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6qdl-apalis: Add sleep state to can interfacesPhilippe Schenker1-6/+21
This patch prepares the devicetree for the new Ixora V1.2 where we are able to turn off the supply of the can transceiver. This implies to use a sleep state on transmission pins in order to prevent backfeeding. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxcPhilippe Schenker1-0/+17
This adds the muxing for the optional pins usb-oc (overcurrent) and usb-id. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx7-colibri: Add touch controllersPhilippe Schenker1-0/+24
Add touch controller that is connected over an I2C bus. It is disabled by default because the pins are also used for PWM, which is the standard use for colibri boards. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx7-colibri: fix 1.8V/UHS supportStefan Agner1-1/+22
Add pinmuxing and do not specify voltage restrictions for the usdhc instance available on the modules edge connector. This allows to use SD-cards with higher transfer modes if supported by the carrier board. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx7-colibri: add GPIO wakeup keyStefan Agner2-1/+20
Add wakeup GPIO key which is able to wake the system from sleep modes (e.g. Suspend-to-Memory). Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: imx7ulp: remove mipi pll clock nodeFancy Fang1-13/+4
According to the IMX7ULP reference manual, the mipi pll clock comes from the MIPI PHY PLL output. So it should not be defined as a fixed clock. So remove this clock node and all the references to it. Signed-off-by: Fancy Fang <chen.fang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: vf610-zii-scu4-aib: Drop "rs485-rts-delay" propertyAndrey Smirnov1-2/+0
LPUART driver does not support specifying "rs485-rts-delay" property. Drop it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02ARM: dts: opos6ul/opos6uldev: rework device tree to support i.MX6ULLSébastien Szymanski7-565/+547
Rework the device trees of the OPOS6UL and OPOS6ULDev boards to support the OPOS6UL SoM with an i.MX6ULL SoC. The device trees are now as following: - imx6ul-imx6ull-opos6ul.dtsi common for both i.MX6UL and i.MX6ULL OPOS6UL SoM. - imx6ul-opos6ul.dtsi for i.MX6UL OPOS6UL SoM. It includes imx6ul.dtsi and imx6ul-imx6ull-opos6ul.dtsi. - imx6ull-opos6ul.dtsi for i.MX6ULL OPOS6UL SoM. It includes imx6ull.dtsi and imx6ul-imx6ull-opos6ul.dtsi. - imx6ul-imx6ull-opos6uldev.dtsi OPOS6ULDev base device tree. - imx6ul-opos6uldev.dts OPOS6ULDev board with an i.MX6UL OPOS6UL SoM. It includes imx6ul-opos6ul.dtsi and imx6ul-imx6ull-opos6uldevdtsi. - imx6ull-opos6uldev.dts OPOS6ULDev board with an i.MX6ULL OPOS6UL SoM. It includes imx6ull-opos6ul.dtsi and imx6ul-imx6ull-opos6uldevdtsi. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-09-30Linux 5.4-rc1Linus Torvalds1-2/+2
2019-09-30csky: Move static keyword to the front of declarationKrzysztof Wilczynski1-1/+1
Move the static keyword to the front of declaration of csky_pmu_of_device_ids, and resolve the following compiler warning that can be seen when building with warnings enabled (W=1): arch/csky/kernel/perf_event.c:1340:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Guo Ren <guoren@kernel.org>
2019-09-30csky: entry: Remove unneeded need_resched() loopValentin Schneider1-4/+0
Since the enabling and disabling of IRQs within preempt_schedule_irq() is contained in a need_resched() loop, we don't need the outer arch code loop. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Guo Ren <guoren@kernel.org>
2019-09-30csky: Fixup csky_pmu.max_period assignmentMao Han1-1/+1
The csky_pmu.max_period has type u64, and BIT() can only return 32 bits unsigned long on C-SKY. The initialization for max_period will be incorrect when count_width is bigger than 32. Use BIT_ULL() Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.