aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-02-15pinctrl: Fix return value check in amd_gpio_probe()Wei Yongjun1-2/+2
In case of error, the function devm_ioremap_nocache() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-15pinctrl: zynq: fix typo in group name for qspi1Helmut Buchsbaum1-1/+1
Due to a typo Zynq pin controller does not set pin function of qspi1 when using function qspi1. So pin group for qspi1 has to be renamed to "qspi1_0_grp" as outlined in the corresponding bindings documentation. This also removes kernel message: zynq-pinctrl 700.pinctrl: invalid group "qspi1_0_grp" for function "qspi1" Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@gmail.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-13pinctrl: mediatek: guard sub-directory with CONFIG_PINCTRL_MTKMasahiro Yamada3-13/+13
CONFIG_PINCTRL_MTK is more suitable than CONFIG_ARCH_MEDIATEK to guard the drivers/pinctrl/mediatek/ directory. (I renamed CONFIG_PINCTRL_MTK_COMMON to CONFIG_PINCTRL_MTK.) This allows COMPILE_TEST to descend into drivers/pinctrl/mediatek without CONFIG_ARCH_MEDIATEK define. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-12pinctrl: intel: Remove unneeded header includesJean Delvare1-4/+0
pinctrl-intel doesn't use anything from <linux/init.h>, <linux/acpi.h>, <linux/gpio.h> or <linux/pm.h>, so it should not include these header files. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-11pinctrl: sunxi: Use pin number when calling sunxi_pmx_setKrzysztof Adamski1-2/+3
sunxi_pmx_set accepts pin number and then calculates offset by subtracting pin_base from it. sunxi_pinctrl_gpio_get, on the other hand, gets offset so we have to convert it to pin number so we won't get negative value in sunxi_pmx_set. This was only used on A10 so far, where there is only one GPIO chip with pin_base set to 0 so it didn't matter. However H3 also requires this workaround but have two pinmux sections, triggering problem for PL port. Signed-off-by: Krzysztof Adamski <k@japko.eu> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-11pinctrl: sunxi: Add H3 R_PIO controller supportKrzysztof Adamski3-0/+111
H3 has additional PIO controller similar to what we can find on A23. It's a 12 pin port, described in H3 Datasheet rev 1.1, pages 345-350. Signed-off-by: Krzysztof Adamski <k@japko.eu> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-10pinctrl: rockchip: add support for the rk3399David Wu2-15/+356
The pinctrl of rk3399 is much different from other's, especially the 3bits of drive strength. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-10pinctrl: uniphier: add COMPILE_TEST optionMasahiro Yamada1-1/+1
Add COMPILE_TEST for the compilation test coverage. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-09pinctrl: stm32: Fix compile testing selectionMaxime Coquelin1-1/+1
While selecting the driver for compile testing seemed possible, the driver was not compiled because the driver directory was only added if ARCH_STM32 was selected. This patch now makes the pinctrl Makefile to add stm32 directory if PINCTRL_STM32 is selected. Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-09pinctrl: stm32: Remove dependency with DT bindings header filesMaxime Coquelin2-2/+8
Some macros where defined in DT bindings headers, whereas only used in the driver. This patch moves these macros to the driver side. Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-05pinctrl: pinctrl-pic32: Add PIC32 pin control driverJoshua Henderson4-0/+2471
Add a driver for the pin controller present on the Microchip PIC32 including the specific variant PIC32MZDA. This driver provides pinmux and pinconfig operations as well as GPIO and IRQ chips for the GPIO banks. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-05pinctrl: Add DT bindings for PIC32 pin control and GPIOJoshua Henderson2-0/+109
Document the devicetree bindings for PINCTRL and GPIO found on Microchip PIC32 class devices. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Cc: Ralf Baechle <ralf@linux-mips.org> Acked-by: Rob Herring <robh@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-05pinctrl: stm32: fix compile error and modernizeLinus Walleij1-9/+6
- Fix the dev->parent assignment compile error - Use gpiochip_get_data() to get the data pointer for the banks Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-05pinctrl: tegra: move Tegra pinctrl drivers to sub-directoryMasahiro Yamada12-42/+43
Tegra has several pinctrl drivers. Now it is reasonable enough to move them into drivers/pinctrl/tegra/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-05pinctrl: mediatek: Add gpio_request_enable supportBiao Huang1-0/+36
Implement the .gpio_request_enable() callbacks in struct pinmux_ops in mediatek pinctrl driver. Make sure that when gpio_request is called, GPIO on the pin is enabled. Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-28pinctrl: sunxi: guard sub-directory with CONFIG_PINCTRL_SUNXIMasahiro Yamada3-17/+17
CONFIG_PINCTRL_SUNXI is more suitable than CONFIG_ARCH_SUNXI to guard the drivers/pinctrl/sunxi/ directory. (I renamed CONFIG_PINCTRL_SUNXI_COMMON to CONFIG_PINCTRL_SUNXI.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-28pinctrl: nomadik: stn8815 CLCD alternate functionsLinus Walleij1-0/+7
The STn8815 has 22 dedicated pins for CLCD with up to 16 bits in parallel, but pins 32 thru 39 can be used for an additional CLCD signal lines 16 thru 23. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-28pinctrl: pxa: guard sub-directory with CONFIG_PINCTRL_PXAMasahiro Yamada1-1/+1
CONFIG_PINCTRL_PXA is more suitable than CONFIG_ARCH_PXA to guard the drivers/pinctrl/pxa/ directory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-28pinctrl: mediatek: Add Pinctrl/GPIO/EINT driver for mt2701Biao Huang6-1/+2941
Add mt2701 support using mediatek common pinctrl driver. MT2701 have some special pins need an extra setting register than other ICs, so adding this support to common code. Signed-off-by: Biao Huang <biao.huang@mediatek.com> Acked-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>