aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-03-20arm64: dts: imx8mq: Add SDMA nodesDaniel Baluta1-0/+22
SDMA1 is part of AIPS-3 region and SDMA2 is part of AIPS-1 region. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-19arm64: dts: imx8mq: add clock for GPIO nodeAnson Huang1-0/+5
i.MX8MQ has clock gate for each GPIO bank, add clock info to GPIO node for clock management. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-19arm64: dts: imx8mq: Add the opp table and cores opp propertiesAbel Vesa1-0/+23
Add the 0.8GHz and 1GHz opps. According to the datasheet: https://www.nxp.com/docs/en/data-sheet/IMX8MDQLQIEC.pdf section 3.1.3 Operating ranges. The 0.8GHz opp runs in nominal mode with the regulator set to 0.9V. The 1GHz runs in overdrive mode with the regulator set to 1V. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-19arm64: dts: imx8mq: Add the buck vdd_arm regulatorAbel Vesa1-0/+35
According to the schematics, this is a MP2147 switch converter which is controlled by GPIO1_IO13. When set the gpio is set to high the regulator output is set to 0.9V. When the gpio is set to low the regulator output is set to 1V. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-19arm64: dts: imx8mq: Add the clocks and the latencies for the A53 coresAbel Vesa1-0/+8
The clocks and their latencies will be used by cpufreq-dt. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-19arm64: dts: ls1028a: Add Audio DT nodesAlison Wang3-0/+182
This patch adds Audio DT nodes for LS1028ARDB and LS1028AQDS boards. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-19arm64: dts: imx8mq: Add on-chip OTP controller nodeCarlo Caione1-0/+8
Add the node for the OTP controller. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-19arm64: dts: imx8qxp: add cpu opp tableAnson Huang1-0/+30
Add i.MX8QXP CPU opp table to support cpufreq. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-17Linux 5.1-rc1Linus Torvalds1-2/+2
2019-03-17perf/x86/intel: Make dev_attr_allow_tsx_force_abort statickbuild test robot1-1/+1
Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort") Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: kbuild-all@01.org Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190313184243.GA10820@lkp-sb-ep06
2019-03-17kconfig: remove stale lxdialog/.gitignoreMasahiro Yamada1-4/+0
When this .gitignore was added, lxdialog was an independent hostprogs-y. Now that all objects in lxdialog/ are directly linked to mconf, the lxdialog is no longer generated. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17kbuild: force all architectures except um to include mandatory-yMasahiro Yamada29-47/+18
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes the common Kbuild.asm file. Factor out the duplicated include directives to scripts/Makefile.asm-generic so that no architecture would opt out of the mandatory-y mechanism. um is not forced to include mandatory-y since it is a very exceptional case which does not support UAPI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17kbuild: warn redundant generic-yMasahiro Yamada12-13/+6
The generic-y is redundant under the following condition: - arch has its own implementation - the same header is added to generated-y - the same header is added to mandatory-y If a redundant generic-y is found, the warning like follows is displayed: scripts/Makefile.asm-generic:20: redundant generic-y found in arch/arm/include/asm/Kbuild: timex.h I fixed up arch Kbuild files found by this. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17Revert "modsign: Abort modules_install when signing fails"Douglas Anderson1-1/+1
This reverts commit caf6fe91ddf62a96401e21e9b7a07227440f4185. The commit was fine but is no longer needed as of commit 3a2429e1faf4 ("kbuild: change if_changed_rule for multi-line recipe"). Let's go back to using ";" to be consistent. For some discussion, see: https://lkml.kernel.org/r/CAK7LNASde0Q9S5GKeQiWhArfER4S4wL1=R_FW8q0++_X3T5=hQ@mail.gmail.com Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17kbuild: Make NOSTDINC_FLAGS a simply expanded variableDouglas Anderson1-1/+1
During a simple no-op (nothing changed) build I saw 39 invocations of the C compiler with the argument "-print-file-name=include". We don't need to call the C compiler 39 times for this--one time will suffice. Let's change NOSTDINC_FLAGS to a simply expanded variable to avoid this since there doesn't appear to be any reason it should be recursively expanded. On my build this shaved ~400 ms off my "no-op" build. Note that the recursive expansion seems to date back to the (really old) commit e8f5bdb02ce0 ("[PATCH] Makefile include path ordering"). It's a little unclear to me if the point of that patch was to switch the variable to be recursively expanded (which it did) or to avoid directly assigning to NOSTDINC_FLAGS (AKA to switch to +=) because someone else (out of tree?) was setting it. I presume later since if the only goal was to switch to recursive expansion the patch would have just removed the ":". Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17kbuild: deb-pkg: avoid implicit effectsArseny Maslennikov1-1/+4
* The man page for dpkg-source(1) notes: > -b, --build directory [format-specific-parameters] > Build a source package (--build since dpkg 1.17.14). > <...> > > dpkg-source will build the source package with the first > format found in this ordered list: the format indicated > with the --format command line option, the format > indicated in debian/source/format, “1.0”. The fallback > to “1.0” is deprecated and will be removed at some point > in the future, you should always document the desired > source format in debian/source/format. See section > SOURCE PACKAGE FORMATS for an extensive description of > the various source package formats. Thus it would be more foolproof to explicitly use 1.0 (as we always did) than to rely on dpkg-source's defaults. * In a similar vein, debian/rules is not made executable by mkdebian, and dpkg-source warns about that but still silently fixes the file. Let's be explicit once again. Signed-off-by: Arseny Maslennikov <ar@cs.msu.ru> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>