| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The following oops occurs after a pgdat is hotadded:
Unable to handle kernel paging request for data at address 0x00c30001
Faulting instruction address: 0xc00000000022f8f4
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter nls_utf8 isofs sg virtio_balloon uio_pdrv_genirq uio ip_tables xfs libcrc32c sr_mod cdrom sd_mod virtio_net ibmvscsi scsi_transport_srp virtio_pci virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 4.8.0-rc1-device #110
task: c000000000ef3080 task.stack: c000000000f6c000
NIP: c00000000022f8f4 LR: c00000000022f948 CTR: 0000000000000000
REGS: c000000000f6fa50 TRAP: 0300 Tainted: G W (4.8.0-rc1-device)
MSR: 800000010280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 84002028 XER: 20000000
CFAR: d000000001d2013c DAR: 0000000000c30001 DSISR: 40000000 SOFTE: 0
NIP refresh_cpu_vm_stats+0x1a4/0x2f0
LR refresh_cpu_vm_stats+0x1f8/0x2f0
Call Trace:
refresh_cpu_vm_stats+0x1f8/0x2f0 (unreliable)
Add per_cpu_nodestats initialization to the hotplug codepath.
Link: http://lkml.kernel.org/r/1470931473-7090-1-git-send-email-arbab@linux.vnet.ibm.com
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
mm/oom_kill.c: In function `task_will_free_mem':
mm/oom_kill.c:767: warning: `ret' may be used uninitialized in this function
If __task_will_free_mem() is never called inside the for_each_process()
loop, ret will not be initialized.
Fixes: 1af8bb43269563e4 ("mm, oom: fortify task_will_free_mem()")
Link: http://lkml.kernel.org/r/1470255599-24841-1-git-send-email-geert@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It's quite unlikely that the user will so little memory that the per-CPU
quarantines won't fit into the given fraction of the available memory.
Even in that case he won't be able to do anything with the information
given in the warning.
Link: http://lkml.kernel.org/r/1470929182-101413-1-git-send-email-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kuthonuzo Luruo <kuthonuzo.luruo@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure
after many small jobs") swap entries do not pin memcg->css.refcnt
directly. Instead, they pin memcg->id.ref. So we should adjust the
reference counters accordingly when moving swap charges between cgroups.
Fixes: 73f576c04b941 ("mm: memcontrol: fix cgroup creation failure after many small jobs")
Link: http://lkml.kernel.org/r/9ce297c64954a42dc90b543bc76106c4a94f07e8.1470219853.git.vdavydov@virtuozzo.com
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org> [3.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
An offline memory cgroup might have anonymous memory or shmem left
charged to it and no swap. Since only swap entries pin the id of an
offline cgroup, such a cgroup will have no id and so an attempt to
swapout its anon/shmem will not store memory cgroup info in the swap
cgroup map. As a result, memcg->swap or memcg->memsw will never get
uncharged from it and any of its ascendants.
Fix this by always charging swapout to the first ancestor cgroup that
hasn't released its id yet.
[hannes@cmpxchg.org: add comment to mem_cgroup_swapout]
[vdavydov@virtuozzo.com: use WARN_ON_ONCE() in mem_cgroup_id_get_online()]
Link: http://lkml.kernel.org/r/20160803123445.GJ13263@esperanza
Fixes: 73f576c04b941 ("mm: memcontrol: fix cgroup creation failure after many small jobs")
Link: http://lkml.kernel.org/r/5336daa5c9a32e776067773d9da655d2dc126491.1470219853.git.vdavydov@virtuozzo.com
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org> [3.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
meminfo_proc_show() and si_mem_available() are using the wrong helpers
for calculating the size of the LRUs. The user-visible impact is that
there appears to be an abnormally high number of unevictable pages.
Link: http://lkml.kernel.org/r/20160805105805.GR2799@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When memory hotplug operates, free hugepages will be freed if the
movable node is offline. Therefore, /proc/sys/vm/nr_hugepages will be
incorrect.
Fix it by reducing max_huge_pages when the node is offlined.
n-horiguchi@ah.jp.nec.com said:
: dissolve_free_huge_page intends to break a hugepage into buddy, and the
: destination hugepage is supposed to be allocated from the pool of the
: destination node, so the system-wide pool size is reduced. So adding
: h->max_huge_pages-- makes sense to me.
Link: http://lkml.kernel.org/r/1470624546-902-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the pxa changes for v4.8 cycle.
This is a tiny fix couple to enable changes in includes in
gpio API without breaking pxa boards.
* tag 'pxa-fixes-v4.8' of https://github.com/rjarzmik/linux:
ARM: pxa: add module.h for corgi symbol_get/symbol_put usage
ARM: pxa: add module.h for spitz symbol_get/symbol_put usage
|
|
ARM SMCCC is only set for ARMv7 and ARMv8 CPUs, but we currently
allow the driver to be build for older architecture levels as
well, which results in a link failure:
drivers/gpu/built-in.o: In function `mtk_hdmi_hw_make_reg_writable':
:(.text+0x1e737c): undefined reference to `arm_smccc_smc'
This adds a Kconfig dependency. The patch applies on my two
previous fixes that are not yet applied, so please apply all
three to get randconfig builds to work correctly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support")
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The mediatek DRM driver can be configured for compile testing with
CONFIG_OF disabled, but then fails to link:
drivers/gpu/built-in.o: In function `mtk_drm_bind':
analogix_dp_reg.c:(.text+0x52888): undefined reference to `of_find_device_by_node'
analogix_dp_reg.c:(.text+0x52930): undefined reference to `of_find_device_by_node'
This adds an explicit Kconfig dependency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.kernel.org/patch/9120871/
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
On kernel builds without COMMON_CLK, the newly added mediatek drm
driver fails to build:
drivers/gpu/drm/mediatek/mtk_mipi_tx.c:130:16: error: field 'pll_hw' has incomplete type
struct clk_hw pll_hw;
^~~~~~
In file included from ../include/linux/clk.h:16:0,
from ../drivers/gpu/drm/mediatek/mtk_mipi_tx.c:14:
drivers/gpu/drm/mediatek/mtk_mipi_tx.c: In function 'mtk_mipi_tx_from_clk_hw':
include/linux/kernel.h:831:48: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
const typeof( ((type *)0)->member ) *__mptr = (ptr); \
^
/drivers/gpu/drm/mediatek/mtk_mipi_tx.c:136:9: note: in expansion of macro 'container_of'
return container_of(hw, struct mtk_mipi_tx, pll_hw);
^~~~~~~~~~~~
drivers/gpu/drm/mediatek/mtk_mipi_tx.c: At top level:
drivers/gpu/drm/mediatek/mtk_mipi_tx.c:302:21: error: variable 'mtk_mipi_tx_pll_ops' has initializer but incomplete type
static const struct clk_ops mtk_mipi_tx_pll_ops = {
This adds the required Kconfig dependency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.kernel.org/patch/9069061/
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
With debugobjects enabled and using SLAB_DESTROY_BY_RCU, when a
kmem_cache_node is destroyed the call_rcu() may trigger a slab
allocation to fill the debug object pool (__debug_object_init:fill_pool).
Everywhere but during kmem_cache_destroy(), discard_slab() is performed
outside of the kmem_cache_node->list_lock and avoids a lockdep warning
about potential recursion:
=============================================
[ INFO: possible recursive locking detected ]
4.8.0-rc1-gfxbench+ #1 Tainted: G U
---------------------------------------------
rmmod/8895 is trying to acquire lock:
(&(&n->list_lock)->rlock){-.-...}, at: [<ffffffff811c80d7>] get_partial_node.isra.63+0x47/0x430
but task is already holding lock:
(&(&n->list_lock)->rlock){-.-...}, at: [<ffffffff811cbda4>] __kmem_cache_shutdown+0x54/0x320
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&n->list_lock)->rlock);
lock(&(&n->list_lock)->rlock);
*** DEADLOCK ***
May be due to missing lock nesting notation
5 locks held by rmmod/8895:
#0: (&dev->mutex){......}, at: driver_detach+0x42/0xc0
#1: (&dev->mutex){......}, at: driver_detach+0x50/0xc0
#2: (cpu_hotplug.dep_map){++++++}, at: get_online_cpus+0x2d/0x80
#3: (slab_mutex){+.+.+.}, at: kmem_cache_destroy+0x3c/0x220
#4: (&(&n->list_lock)->rlock){-.-...}, at: __kmem_cache_shutdown+0x54/0x320
stack backtrace:
CPU: 6 PID: 8895 Comm: rmmod Tainted: G U 4.8.0-rc1-gfxbench+ #1
Hardware name: Gigabyte Technology Co., Ltd. H87M-D3H/H87M-D3H, BIOS F11 08/18/2015
Call Trace:
__lock_acquire+0x1646/0x1ad0
lock_acquire+0xb2/0x200
_raw_spin_lock+0x36/0x50
get_partial_node.isra.63+0x47/0x430
___slab_alloc.constprop.67+0x1a7/0x3b0
__slab_alloc.isra.64.constprop.66+0x43/0x80
kmem_cache_alloc+0x236/0x2d0
__debug_object_init+0x2de/0x400
debug_object_activate+0x109/0x1e0
__call_rcu.constprop.63+0x32/0x2f0
call_rcu+0x12/0x20
discard_slab+0x3d/0x40
__kmem_cache_shutdown+0xdb/0x320
shutdown_cache+0x19/0x60
kmem_cache_destroy+0x1ae/0x220
i915_gem_load_cleanup+0x14/0x40 [i915]
i915_driver_unload+0x151/0x180 [i915]
i915_pci_remove+0x14/0x20 [i915]
pci_device_remove+0x34/0xb0
__device_release_driver+0x95/0x140
driver_detach+0xb6/0xc0
bus_remove_driver+0x53/0xd0
driver_unregister+0x27/0x50
pci_unregister_driver+0x25/0x70
i915_exit+0x1a/0x1e2 [i915]
SyS_delete_module+0x193/0x1f0
entry_SYSCALL_64_fastpath+0x1c/0xac
Fixes: 52b4b950b507 ("mm: slab: free kmem_cache_node after destroy sysfs file")
Link: http://lkml.kernel.org/r/1470759070-18743-1-git-send-email-chris@chris-wilson.co.uk
Reported-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In page_remove_file_rmap(.) we have the following check:
VM_BUG_ON_PAGE(compound && !PageTransHuge(page), page);
This is meant to check for either HugeTLB pages or THP when a compound
page is passed in.
Unfortunately, if one disables CONFIG_TRANSPARENT_HUGEPAGE, then
PageTransHuge(.) will always return false, provoking BUGs when one runs
the libhugetlbfs test suite.
This patch replaces PageTransHuge(), with PageHead() which will work for
both HugeTLB and THP.
Fixes: dd78fedde4b9 ("rmap: support file thp")
Link: http://lkml.kernel.org/r/1470838217-5889-1-git-send-email-steve.capper@arm.com
Signed-off-by: Steve Capper <steve.capper@arm.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Huang Shijie <shijie.huang@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
PageTransCompound() doesn't distinguish THP from from any other type of
compound pages. This can lead to false-positive VM_BUG_ON() in
page_add_file_rmap() if called on compound page from a driver[1].
I think we can exclude such cases by checking if the page belong to a
mapping.
The VM_BUG_ON_PAGE() is downgraded to VM_WARN_ON_ONCE(). This path
should not cause any harm to non-THP page, but good to know if we step
on anything else.
[1] http://lkml.kernel.org/r/c711e067-0bff-a6cb-3c37-04dfe77d2db1@redhat.com
Link: http://lkml.kernel.org/r/20160810161345.GA67522@black.fi.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Laura Abbott <labbott@redhat.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some of node threshold depends on number of managed pages in the node.
When memory is going on/offline, it can be changed and we need to adjust
them.
Add recalculation to appropriate places and clean-up related functions
for better maintenance.
Link: http://lkml.kernel.org/r/1470724248-26780-2-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Before resetting min_unmapped_pages, we need to initialize
min_unmapped_pages rather than min_slab_pages.
Fixes: a5f5f91da6 (mm: convert zone_reclaim to node_reclaim)
Link: http://lkml.kernel.org/r/1470724248-26780-1-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The newly introduced shmem_huge_enabled() function has two definitions,
but neither of them is visible if CONFIG_SYSFS is disabled, leading to a
build error:
mm/khugepaged.o: In function `khugepaged':
khugepaged.c:(.text.khugepaged+0x3ca): undefined reference to `shmem_huge_enabled'
This changes the #ifdef guards around the definition to match those that
are used in the header file.
Fixes: e496cf3d7821 ("thp: introduce CONFIG_TRANSPARENT_HUGE_PAGECACHE")
Link: http://lkml.kernel.org/r/20160809123638.1357593-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Revert commit 51d5d12b8f3d ("ARM: keystone: dts: add psci command
definition"), which was inadvertently added twice.
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Original patch: https://lkml.org/lkml/2016/8/4/32
If riocm_ch_alloc() fails then we end up dereferencing the error
pointer.
The problem is that we're not unwinding in the reverse order from how we
allocate things so it gets confusing. I've changed this around so now
"ch" is NULL when we are done with it after we call riocm_put_channel().
That way we can check if it's NULL and avoid calling riocm_put_channel()
on it twice.
I renamed err_nodev to err_put_new_ch so that it better reflects what
the goto does.
Then because we had flipping things around, it means we don't neeed to
initialize the pointers to NULL and we can remove an if statement and
pull things in an indent level.
Link: http://lkml.kernel.org/r/20160805152406.20713-1-alexandre.bounine@idt.com
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Even when PCI is disabled, ARCH_HISI selects HISILICON_IRQ_MBIGEN
triggerring the following config warning:
warning: (ARM64 && HISILICON_IRQ_MBIGEN) selects ARM_GIC_V3_ITS which
has unmet direct dependencies (PCI && PCI_MSI)
This patch makes selection of HISILICON_IRQ_MBIGEN conditional on PCI.
Cc: Ma Jun <majun258@huawei.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Even when PCI is disabled, ARCH_ALPINE selects ALPINE_MSI triggerring
the following config warning:
warning: (ARCH_ALPINE) selects ALPINE_MSI which has unmet direct
dependencies (PCI)
This patch makes selection of ALPINE_MSI conditional on PCI.
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Clearly QEMU is very permissive in how its PL310 model may be set up,
but the real hardware turns out to be far more particular about things
actually being correct. Fix up the DT description so that the real
thing actually boots:
- The arm,data-latency and arm,tag-latency properties need 3 cells to
be valid, otherwise we end up retaining the default 8-cycle latencies
which leads pretty quickly to lockup.
- The arm,dirty-latency property is only relevant to L210/L220, so get
rid of it.
- The cache geometry override also leads to lockup and/or general
misbehaviour. Irritatingly, the manual doesn't state the actual PL310
configuration, but based on the boardfile code and poking registers
from the Boot Monitor, it would seem to be 8 sets of 16KB ways.
With that, we can successfully boot to enjoy the fun of mismatched FPUs...
Cc: stable@vger.kernel.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
quirk, wrong addresses were introduced. Fix it and use the correct
addresses.
Thierry let me know, that there is another patch (b5896f67ab3c in
linux-next) in preparation which removes all the '0,' prefixes of unit
addresses on Tegra124 and is planned to go upstream in 4.8, so
this patch will get reverted then.
But for the moment, this patch is necessary to fix current misbehaviour.
Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Cc: stable@vger.kernel.org # v4.7
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This syscon needs to be looked up by clocks, flash protection
and other consumers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This syscon needs to be looked up by flash protection, CLCD
display output settings and other consumers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
For unknown reasons, we have to enable three symbols for a platform
to use a reset controller driver, otherwise we get a Kconfig
warning:
warning: (MACH_OX810SE) selects RESET_OXNAS which has unmet direct dependencies (RESET_CONTROLLER)
This selects the other two symbols for oxnas.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
|
|
The machine specific header files are exported for traditional
platforms, but not for the ones that use ARCH_MULTIPLATFORM, as
they could conflict with one another.
In case of ARM_SINGLE_ARMV7M, we end up also exporting them,
but that appears to be a mistake, and we should treat it the
same way as ARCH_MULTIPLATFORM here.
'make W=1' warns about this because it passes -Wmissing-includes
to gcc and the directories are not actually present.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Three platforms used to have header files in include/mach that
are now all gone, but the removed directories are still being
included, which leads to -Wmissing-include-dirs warnings.
This removes the extra -I flags.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add access checks to sys_oabi_epoll_wait() and sys_oabi_semtimedop().
This fixes CVE-2016-3857, a local privilege escalation under
CONFIG_OABI_COMPAT.
Cc: stable@vger.kernel.org
Reported-by: Chiachih Wu <wuchiachih@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Dave Weinstein <olorin@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If get_maintainer is not given any filename arguments on the command line,
the standard input is read for a patch.
But checking if a VCS has a file named &STDIN is not a good idea and fails.
Verify the nominal input file is not &STDIN before checking the VCS.
Fixes: 4cad35a7ca69 ("get_maintainer.pl: reduce need for command-line option -f")
Reported-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
fence_put was called on an uninitialized variable.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jay Cornwall <jay@jcornwall.me>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 874f9c7da9a4acbc1b9e12ca722579fb50e4d142.
Geert Uytterhoeven reports:
"This change seems to have an (unintendent?) side-effect.
Before, pr_*() calls without a trailing newline characters would be
printed with a newline character appended, both on the console and in
the output of the dmesg command.
After this commit, no new line character is appended, and the output
of the next pr_*() call of the same type may be appended, like in:
- Truncating RAM at 0x0000000040000000-0x00000000c0000000 to -0x0000000070000000
- Ignoring RAM at 0x0000000200000000-0x0000000240000000 (!CONFIG_HIGHMEM)
+ Truncating RAM at 0x0000000040000000-0x00000000c0000000 to -0x0000000070000000Ignoring RAM at 0x0000000200000000-0x0000000240000000 (!CONFIG_HIGHMEM)"
Joe Perches says:
"No, that is not intentional.
The newline handling code inside vprintk_emit is a bit involved and
for now I suggest a revert until this has all the same behavior as
earlier"
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Requested-by: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit b195d5e2bffd ("ipr: Wait to do async scan until scsi host is
initialized") fixed async scan for ipr, but broke sync scan for ipr.
This fixes sync scan back up.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reported-and-tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To distinguish non-slab pages charged to kmemcg we mark them PageKmemcg,
which sets page->_mapcount to -512. Currently, we set/clear PageKmemcg
in __alloc_pages_nodemask()/free_pages_prepare() for any page allocated
with __GFP_ACCOUNT, including those that aren't actually charged to any
cgroup, i.e. allocated from the root cgroup context. To avoid overhead
in case cgroups are not used, we only do that if memcg_kmem_enabled() is
true. The latter is set iff there are kmem-enabled memory cgroups
(online or offline). The root cgroup is not considered kmem-enabled.
As a result, if a page is allocated with __GFP_ACCOUNT for the root
cgroup when there are kmem-enabled memory cgroups and is freed after all
kmem-enabled memory cgroups were removed, e.g.
# no memory cgroups has been created yet, create one
mkdir /sys/fs/cgroup/memory/test
# run something allocating pages with __GFP_ACCOUNT, e.g.
# a program using pipe
dmesg | tail
# remove the memory cgroup
rmdir /sys/fs/cgroup/memory/test
we'll get bad page state bug complaining about page->_mapcount != -1:
BUG: Bad page state in process swapper/0 pfn:1fd945c
page:ffffea007f651700 count:0 mapcount:-511 mapping: (null) index:0x0
flags: 0x1000000000000000()
To avoid that, let's mark with PageKmemcg only those pages that are
actually charged to and hence pin a non-root memory cgroup.
Fixes: 4949148ad433 ("mm: charge/uncharge kmemcg from generic page allocator paths")
Reported-and-tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
pathbase is the base inode; set it to 0 if we've got no path.
Coverity-id: 146348
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
|
|
ceph_file_layout::pool_id is now s64. rbd_add_get_pool_id() and
ceph_pg_poolid_by_name() both return an int, so it's bogus anyway.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
|
|
The symbols used in the tick_stop tracepoint were not being converted
properly into integers in the trace_stop format file. Instead we had this:
print fmt: "success=%d dependency=%s", REC->success,
__print_symbolic(REC->dependency, { 0, "NONE" },
{ (1 << TICK_DEP_BIT_POSIX_TIMER), "POSIX_TIMER" },
{ (1 << TICK_DEP_BIT_PERF_EVENTS), "PERF_EVENTS" },
{ (1 << TICK_DEP_BIT_SCHED), "SCHED" },
{ (1 << TICK_DEP_BIT_CLOCK_UNSTABLE), "CLOCK_UNSTABLE" })
User space tools have no idea how to parse "TICK_DEP_BIT_SCHED" or the other
symbols used to do the bit shifting. The reason is that the conversion was
done with using the TICK_DEP_MASK_* symbols which are just macros that
convert to the BIT shift itself (with the exception of NONE, which was
converted properly, because it doesn't use bits, and is defined as zero).
The TICK_DEP_BIT_* needs to be denoted by TRACE_DEFINE_ENUM() in order to
have this properly converted for user space tools to parse this event.
Cc: stable@vger.kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Fixes: e6e6cc22e067 ("nohz: Use enum code for tick stop failure tracing message")
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The recent commit 599d0c954f91 ("mm, vmscan: move LRU lists to node"),
changed memory management code so that show_mem() is no longer safe to
call prior to setup_per_cpu_pageset(), as pgdat->per_cpu_nodestats will
still be NULL. This causes an oops on metag due to the call to
show_mem() from mem_init():
node_page_state_snapshot(...) + 0x48
pgdat_reclaimable(struct pglist_data * pgdat = 0x402517a0)
show_free_areas(unsigned int filter = 0) + 0x2cc
show_mem(unsigned int filter = 0) + 0x18
mem_init()
mm_init()
start_kernel() + 0x204
This wasn't a problem before with zone_reclaimable() as zone_pcp_init()
was already setting zone->pageset to &boot_pageset, via setup_arch() and
paging_init(), which happens before mm_init():
zone_pcp_init(...)
free_area_init_core(...) + 0x138
free_area_init_node(int nid = 0, ...) + 0x1a0
free_area_init_nodes(...) + 0x440
paging_init(unsigned long mem_end = 0x4fe00000) + 0x378
setup_arch(char ** cmdline_p = 0x4024e038) + 0x2b8
start_kernel() + 0x54
No other arches appear to call show_mem() during boot, and it doesn't
really add much value to the log, so lets just drop it from mem_init().
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-metag@vger.kernel.org
|
|
There only ever have been two host implementations of the old
s390-virtio (pre-ccw) transport: the experimental kuli userspace,
and qemu. As qemu switched its default to ccw with 2.4 (with most
users having used ccw well before that) and removed the old transport
entirely in 2.6, s390-virtio probably hasn't been in active use for
quite some time and is therefore likely to bitrot.
Let's start the slow march towards removing the code by deprecating
it.
Note that this also deprecates the early virtio console code, which
has been causing trouble in the guest without being wired up in any
relevant hypervisor code.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In case the registration of the hvc tty never happens AND the kernel
thinks that hvc0 is the preferred console we should keep the early
printk function to avoid a kernel panic due to code being removed.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We do a lot of memory allocation in function init_vq, and don't handle
the allocation failure properly. Then this function will return 0,
although initialization fails due to lacking memory. At that moment,
kernel will panic in guest machine, if virtio is used to drive disk.
To fix this bug, we should take care of allocation failure, and return
correct value to let caller know what happen.
Tested-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Minfei Huang <mnghuan@gmail.com>
Signed-off-by: Minfei Huang <minfei.hmf@alibaba-inc.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Stash the packet length in a local variable before handing over
ownership of the packet to virtio_transport_recv_pkt() or
virtio_transport_free_pkt().
This patch solves the use-after-free since pkt is no longer guaranteed
to be alive.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The memory allocated by iov_iter_get_pages_alloc() can be allocated with
vmalloc() if kmalloc() failed -- see get_pages_array().
In that case we need to free it with vfree(), so let's use kvfree().
The bug manifests like this:
BUG: unable to handle kernel paging request at ffffeb0400072da0
IP: [<ffffffff8139c67b>] kfree+0x4b/0x140
PGD 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 2 PID: 675 Comm: trinity-c2 Not tainted 4.7.0-rc7+ #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
task: ffff8800badef2c0 ti: ffff880069208000 task.ti: ffff880069208000
RIP: 0010:[<ffffffff8139c67b>] [<ffffffff8139c67b>] kfree+0x4b/0x140
RSP: 0000:ffff88006920f3f0 EFLAGS: 00010282
RAX: ffffea0000000000 RBX: ffffc90001cb6000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffffc90001cb6000
RBP: ffff88006920f410 R08: 0000000000000000 R09: dffffc0000000000
R10: ffff8800badefa30 R11: 0000056a3d3b0d9f R12: ffff88006920f620
R13: ffffeb0400072d80 R14: ffff8800baa94078 R15: 0000000000000000
FS: 00007fbd2b437700(0000) GS:ffff88011af00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffeb0400072da0 CR3: 000000006926d000 CR4: 00000000000006e0
Stack:
0000000000000001 ffff88006920f620 ffffed001755280f ffff8800baa94078
ffff88006920f6a8 ffffffff8310442b dffffc0000000000 ffff8800badefa30
ffff8800badefa28 ffff88011af1fba0 1ffff1000d241e98 ffff8800ba892150
Call Trace:
[<ffffffff8310442b>] p9_virtio_zc_request+0x72b/0xdb0
[<ffffffff830f2116>] p9_client_zc_rpc.constprop.8+0x246/0xb10
[<ffffffff830f5d79>] p9_client_read+0x4c9/0x750
[<ffffffff8175ceac>] v9fs_fid_readpage+0x14c/0x320
[<ffffffff8175d0b6>] v9fs_vfs_readpage+0x36/0x50
[<ffffffff812c6f13>] filemap_fault+0x9a3/0xe60
[<ffffffff81331878>] __do_fault+0x158/0x300
[<ffffffff81339e01>] handle_mm_fault+0x1cf1/0x3c80
[<ffffffff810c0aaa>] __do_page_fault+0x30a/0x8e0
[<ffffffff810c10df>] do_page_fault+0x2f/0x80
[<ffffffff810b5b07>] do_async_page_fault+0x27/0xa0
[<ffffffff83296c48>] async_page_fault+0x28/0x30
Code: 00 80 41 54 53 49 01 fd 48 0f 42 05 b0 39 67 02 48 89 fb 49 01 c5 48 b8 00 00 00 00 00 ea ff ff 49 c1 ed 0c 49 c1 e5 06 49 01 c5 <49> 8b 45 20 48 8d 50 ff a8 01 4c 0f 45 ea 49 8b 55 20 48 8d 42
RIP [<ffffffff8139c67b>] kfree+0x4b/0x140
RSP <ffff88006920f3f0>
CR2: ffffeb0400072da0
---[ end trace f3d59a04bafec038 ]---
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
On error, virtqueue_add calls START_USE but not
END_USE. Thankfully that's normally empty anyway,
but might not be when debugging. Fix it up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When using the indirect buffers feature, 'desc' is allocated in
virtqueue_add() but isn't freed before leaving on a ring full error,
causing a memory leak.
For example, it seems rather clear that this can trigger
with virtio net if mergeable buffers are not used.
Cc: stable@vger.kernel.org
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The doorbell offset is formatted with a 0x prefix to suggest it is
a hexadecimal value, when in fact %d is being used and this is confusing.
Use %X instead to match the proceeding 0x prefix.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This reverts commit bdfb76040068d960cb9e226876be8a508d741c4a.
Now that d3cold is upstream, there is no more need for this workaround.
|
|
This reverts commit c63695cc5e5f685e924e25a8f9555f6e846f1fc6.
Now that d3cold support is upstream, there is no more need for this
workaround.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=97248
|
Reza Arbab
Geert Uytterhoeven
Alexander Potapenko
Vladimir Davydov
Mel Gorman
zhong jiang
Arnd Bergmann
Chris Wilson
Steve Capper
Kirill A. Shutemov
Joonsoo Kim
Andrew Morton
Dan Carpenter
Sudeep Holla
Robin Murphy
Ralf Ramsauer
Linus Walleij
Dave Weinstein
Joe Perches
Jay Cornwall
Chunming Zhou
Linus Torvalds
Brian King
Ilya Dryomov
Steven Rostedt (Red Hat)
James Hogan
Cornelia Huck
Christian Borntraeger
Minfei Huang
Stefan Hajnoczi
Vegard Nossum
Michael S. Tsirkin
Wei Yongjun
Colin Ian King
Alex Deucher