| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The throttle interaction made my brain hurt, make it consistently
about 0 transitions of h_nr_running.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Now that fair_server exists, we no longer need RT bandwidth control
unless RT_GROUP_SCHED.
Enable fair_server with parameters equivalent to RT throttling.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: "Vineeth Pillai (Google)" <vineeth@bitbyteword.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/14d562db55df5c3c780d91940743acb166895ef7.1716811044.git.bristot@kernel.org
|
|
* Use simple CFS pick_task for DL pick_task
DL server's pick_task calls CFS's pick_next_task_fair(), this is wrong
because core scheduling's pick_task only calls CFS's pick_task() for
evaluation / checking of the CFS task (comparing across CPUs), not for
actually affirmatively picking the next task. This causes RB tree
corruption issues in CFS that were found by syzbot.
* Make pick_task_fair clear DL server
A DL task pick might set ->dl_server, but it is possible the task will
never run (say the other HT has a stop task). If the CFS task is picked
in the future directly (say without DL server), ->dl_server will be
set. So clear it in pick_task_fair().
This fixes the KASAN issue reported by syzbot in set_next_entity().
(DL refactoring suggestions by Vineeth Pillai).
Reported-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vineeth Pillai <vineeth@bitbyteword.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/b10489ab1f03d23e08e6097acea47442e7d6466f.1716811044.git.bristot@kernel.org
|
|
In core scheduling, a DL server pick (which is CFS task) should be
given higher priority than tasks in other classes.
Not doing so causes CFS starvation. A kselftest is added later to
demonstrate this. A CFS task that is competing with RT tasks can
be completely starved without this and the DL server's boosting
completely ignored.
Fix these problems.
Reported-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vineeth Pillai <vineeth@bitbyteword.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/48b78521d86f3b33c24994d843c1aad6b987dda9.1716811044.git.bristot@kernel.org
|
|
Add an interface for fair server setup on debugfs.
Each CPU has two files under /debug/sched/fair_server/cpu{ID}:
- runtime: set runtime in ns
- period: set period in ns
This then leaves /proc/sys/kernel/sched_rt_{period,runtime}_us to set
bounds on admission control.
The interface also add the server to the dl bandwidth accounting.
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/a9ef9fc69bcedb44bddc9bc34f2b313296052819.1716811044.git.bristot@kernel.org
|
|
Among the motivations for the DL servers is the real-time throttling
mechanism. This mechanism works by throttling the rt_rq after
running for a long period without leaving space for fair tasks.
The base dl server avoids this problem by boosting fair tasks instead
of throttling the rt_rq. The point is that it boosts without waiting
for potential starvation, causing some non-intuitive cases.
For example, an IRQ dispatches two tasks on an idle system, a fair
and an RT. The DL server will be activated, running the fair task
before the RT one. This problem can be avoided by deferring the
dl server activation.
By setting the defer option, the dl_server will dispatch an
SCHED_DEADLINE reservation with replenished runtime, but throttled.
The dl_timer will be set for the defer time at (period - runtime) ns
from start time. Thus boosting the fair rq at defer time.
If the fair scheduler has the opportunity to run while waiting
for defer time, the dl server runtime will be consumed. If
the runtime is completely consumed before the defer time, the
server will be replenished while still in a throttled state. Then,
the dl_timer will be reset to the new defer time
If the fair server reaches the defer time without consuming
its runtime, the server will start running, following CBS rules
(thus without breaking SCHED_DEADLINE). Then the server will
continue the running state (without deferring) until it fair
tasks are able to execute as regular fair scheduler (end of
the starvation).
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/dd175943c72533cd9f0b87767c6499204879cc38.1716811044.git.bristot@kernel.org
|
|
Use deadline servers to service fair tasks.
This patch adds a fair_server deadline entity which acts as a container
for fair entities and can be used to fix starvation when higher priority
(wrt fair) tasks are monopolizing CPU(s).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/b6b0bcefaf25391bcf5b6ecdb9f1218de402d42e.1716811044.git.bristot@kernel.org
|
|
In case the previous pick was a DL server pick, ->dl_server might be
set. Clear it in the fast path as well.
Fixes: 63ba8422f876 ("sched/deadline: Introduce deadline servers")
Signed-off-by: Youssef Esmat <youssefesmat@google.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/7f7381ccba09efcb4a1c1ff808ed58385eccc222.1716811044.git.bristot@kernel.org
|
|
Paths using put_prev_task_balance() need to do a pick shortly
after. Make sure they also clear the ->dl_server on prev as a
part of that.
Fixes: 63ba8422f876 ("sched/deadline: Introduce deadline servers")
Signed-off-by: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/d184d554434bedbad0581cb34656582d78655150.1716811044.git.bristot@kernel.org
|
|
Add an explanation for the newly added variable.
Fixes: 63ba8422f876 ("sched/deadline: Introduce deadline servers")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/147f7aa8cb8fd925f36aa8059af6a35aad08b45a.1716811044.git.bristot@kernel.org
|
|
Consider the following cgroup:
root
|
------------------------
| |
normal_cgroup idle_cgroup
| |
SCHED_IDLE task_A SCHED_NORMAL task_B
According to the cgroup hierarchy, A should preempt B. But current
check_preempt_wakeup_fair() treats cgroup se and task separately, so B
will preempt A unexpectedly.
Unify the wakeup logic by {c,p}se_is_idle only. This makes SCHED_IDLE of
a task a relative policy that is effective only within its own cgroup,
similar to the behavior of NICE.
Also fix se_is_idle() definition when !CONFIG_FAIR_GROUP_SCHED.
Fixes: 304000390f88 ("sched: Cgroup SCHED_IDLE support")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Don <joshdon@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20240626023505.1332596-1-dtcccc@linux.alibaba.com
|
|
As a hedge against unexpected user issues commit 88c56cfeaec4
("sched/fair: Block nohz tick_stop when cfs bandwidth in use")
included a scheduler feature to disable the new functionality.
It's been a few releases (v6.6) and no screams, so remove it.
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20240515133705.3632915-1-pauld@redhat.com
|
|
nr_spread_over tracks the number of instances where the difference
between a scheduling entity's virtual runtime and the minimum virtual
runtime in the runqueue exceeds three times the scheduler latency,
indicating significant disparity in task scheduling.
Commit that removed its usage: 5e963f2bd: sched/fair: Commit to EEVDF
cfs_rq->exec_clock was used to account for time spent executing tasks.
Commit that removed its usage: 5d69eca542ee1 sched: Unify runtime
accounting across classes
cfs_rq::nr_spread_over and cfs_rq::exec_clock are not used anymore in
eevdf. Remove them from struct cfs_rq.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Vishal Chourasia <vishalc@linux.ibm.com>
Link: https://lore.kernel.org/r/20240717143342.593262-1-zhouchuyi@bytedance.com
|
|
Background
==========
When repeated migrate_disable() calls are made with missing the
corresponding migrate_enable() calls, there is a risk of
'migration_disabled' going upper overflow because
'migration_disabled' is a type of unsigned short whose max value is
65535.
In PREEMPT_RT kernel, if 'migration_disabled' goes upper overflow, it may
make the migrate_disable() ineffective within local_lock_irqsave(). This
is because, during the scheduling procedure, the value of
'migration_disabled' will be checked, which can trigger CPU migration.
Consequently, the count of 'rcu_read_lock_nesting' may leak due to
local_lock_irqsave() and local_unlock_irqrestore() occurring on different
CPUs.
Usecase
========
For example, When I developed a driver, I encountered a warning like
"WARNING: CPU: 4 PID: 260 at kernel/rcu/tree_plugin.h:315
rcu_note_context_switch+0xa8/0x4e8" warning. It took me half a month
to locate this issue. Ultimately, I discovered that the lack of upper
overflow detection mechanism in migrate_disable() was the root cause,
leading to a significant amount of time spent on problem localization.
If the upper overflow detection mechanism was added to migrate_disable(),
the root cause could be very quickly and easily identified.
Effect
======
Using WARN_ON_ONCE() to check if 'migration_disabled' is upper overflow
can help developers identify the issue quickly.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Peilin He<he.peilin@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Reviewed-by: Qiang Tu <tu.qiang35@zte.com.cn>
Reviewed-by: Kun Jiang <jiang.kun2@zte.com.cn>
Reviewed-by: Fan Yu <fan.yu9@zte.com.cn>
Link: https://lkml.kernel.org/r/20240716104244764N2jD8gnBpnsLjCDnQGQ8c@zte.com.cn
|
|
When creating a new task, we initialize vruntime of the newly task at
sched_cgroup_fork(). However, the timing of executing this action is too
early and may not be accurate.
Because it uses current CPU to init the vruntime, but the new task
actually runs on the cpu which be assigned at wake_up_new_task().
To optimize this case, we pass ENQUEUE_INITIAL flag to activate_task()
in wake_up_new_task(), in this way, when place_entity is called in
enqueue_entity(), the vruntime of the new task will be initialized.
In addition, place_entity() in task_fork_fair() was introduced for two
reasons:
1. Previously, the __enqueue_entity() was in task_new_fair(),
in order to provide vruntime for enqueueing the newly task, the
vruntime assignment equation "se->vruntime = cfs_rq->min_vruntime" was
introduced by commit e9acbff6484d ("sched: introduce se->vruntime").
This is the initial state of place_entity().
2. commit 4d78e7b656aa ("sched: new task placement for vruntime") added
child_runs_first task placement feature which based on vruntime, this
also requires the new task's vruntime value.
After removing the child_runs_first and enqueue_entity() from
task_fork_fair(), this place_entity() no longer makes sense, so remove
it also.
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240627133359.1370598-1-zhangqiao22@huawei.com
|
|
If cpuset_cpu_inactive() fails, set_rq_online() need be called to rollback.
Fixes: 120455c514f7 ("sched: Fix hotplug vs CPU bandwidth control")
Cc: stable@kernel.org
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240703031610.587047-5-yangyingliang@huaweicloud.com
|
|
Introduce sched_set_rq_on/offline() helper, so it can be called
in normal or error path simply. No functional changed.
Cc: stable@kernel.org
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240703031610.587047-4-yangyingliang@huaweicloud.com
|
|
I got the following warn report while doing stress test:
jump label: negative count!
WARNING: CPU: 3 PID: 38 at kernel/jump_label.c:263 static_key_slow_try_dec+0x9d/0xb0
Call Trace:
<TASK>
__static_key_slow_dec_cpuslocked+0x16/0x70
sched_cpu_deactivate+0x26e/0x2a0
cpuhp_invoke_callback+0x3ad/0x10d0
cpuhp_thread_fun+0x3f5/0x680
smpboot_thread_fn+0x56d/0x8d0
kthread+0x309/0x400
ret_from_fork+0x41/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
Because when cpuset_cpu_inactive() fails in sched_cpu_deactivate(),
the cpu offline failed, but sched_smt_present is decremented before
calling sched_cpu_deactivate(), it leads to unbalanced dec/inc, so
fix it by incrementing sched_smt_present in the error path.
Fixes: c5511d03ec09 ("sched/smt: Make sched_smt_present track topology")
Cc: stable@kernel.org
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20240703031610.587047-3-yangyingliang@huaweicloud.com
|
|
Introduce sched_smt_present_inc/dec() helper, so it can be called
in normal or error path simply. No functional changed.
Cc: stable@kernel.org
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240703031610.587047-2-yangyingliang@huaweicloud.com
|
|
In extreme test scenarios:
the 14th field utime in /proc/xx/stat is greater than sum_exec_runtime,
utime = 18446744073709518790 ns, rtime = 135989749728000 ns
In cputime_adjust() process, stime is greater than rtime due to
mul_u64_u64_div_u64() precision problem.
before call mul_u64_u64_div_u64(),
stime = 175136586720000, rtime = 135989749728000, utime = 1416780000.
after call mul_u64_u64_div_u64(),
stime = 135989949653530
unsigned reversion occurs because rtime is less than stime.
utime = rtime - stime = 135989749728000 - 135989949653530
= -199925530
= (u64)18446744073709518790
Trigger condition:
1). User task run in kernel mode most of time
2). ARM64 architecture
3). TICK_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
Fix mul_u64_u64_div_u64() conversion precision by reset stime to rtime
Fixes: 3dc167ba5729 ("sched/cputime: Improve cputime_adjust()")
Signed-off-by: Zheng Zucheng <zhengzucheng@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20240726023235.217771-1-zhengzucheng@huawei.com
|
|
|
|
This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.
That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 3a7e02c040b1 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:
$ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]
This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.
'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.
All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.
Cc: stable@vger.kernel.org
Fixes: 4f7fd4d7a791 ("[PATCH] Add the -fstack-protector option to the CFLAGS")
Fixes: 60a5317ff0f4 ("x86: implement x86_32 stack protector")
Link: https://github.com/llvm/llvm-project/commit/6461e537815f7fa68cef06842505353cf5600e9c [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Since ubiblock_exit() is now called from an init function,
the __exit section no longer makes sense.
Cc: Ben Hutchings <bwh@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407131403.wZJpd8n2-lkp@intel.com/
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
|
|
In the same way as for other similar files, mark as ghost the new file
generated by depmod for configured weak dependencies for modules,
modules.weakdep, so that although it is not included in the package,
claim the ownership on it.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
hostfs not keep the host directory when mounting. When the host
directory is none (default), fc->source is used as the host root
directory, and this is wrong. Here we use `parse_monolithic` to
handle the old mount path for parsing the root directory. For new
mount path, The `parse_param` is used for the host directory parse.
Reported-and-tested-by: Maciej Żenczykowski <maze@google.com>
Fixes: cd140ce9f611 ("hostfs: convert hostfs to use the new mount API")
Link: https://lore.kernel.org/all/CANP3RGceNzwdb7w=vPf5=7BCid5HVQDmz1K5kC9JG42+HVAh_g@mail.gmail.com/
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240725065130.1821964-1-lihongbo22@huawei.com
[brauner: minor fixes]
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Christian noticed that it is possible for a privileged user to mount
most filesystems with a non-initial user namespace in sb->s_user_ns.
When fsopen() is called in a non-init namespace the caller's namespace
is recorded in fs_context->user_ns. If the returned file descriptor is
then passed to a process priviliged in init_user_ns, that process can
call fsconfig(fd_fs, FSCONFIG_CMD_CREATE), creating a new superblock
with sb->s_user_ns set to the namespace of the process which called
fsopen().
This is problematic. We cannot assume that any filesystem which does not
set FS_USERNS_MOUNT has been written with a non-initial s_user_ns in
mind, increasing the risk for bugs and security issues.
Prevent this by returning EPERM from sget_fc() when FS_USERNS_MOUNT is
not set for the filesystem and a non-initial user namespace will be
used. sget() does not need to be updated as it always uses the user
namespace of the current context, or the initial user namespace if
SB_SUBMOUNT is set.
Fixes: cb50b348c71f ("convenience helpers: vfs_get_super() and sget_fc()")
Reported-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Link: https://lore.kernel.org/r/20240724-s_user_ns-fix-v1-1-895d07c94701@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In a commit 1d717123bb1a ("ALSA: firewire-lib: Avoid
-Wflex-array-member-not-at-end warning"), DEFINE_FLEX() macro was used to
handle variable length of array for header field in struct fw_iso_packet
structure. The usage of macro has a side effect that the designated
initializer assigns the count of array to the given field. Therefore
CIP_HEADER_QUADLETS (=2) is assigned to struct fw_iso_packet.header,
while the original designated initializer assigns zero to all fields.
With CIP_NO_HEADER flag, the change causes invalid length of header in
isochronous packet for 1394 OHCI IT context. This bug affects all of
devices supported by ALSA fireface driver; RME Fireface 400, 800, UCX, UFX,
and 802.
This commit fixes the bug by replacing it with the alternative version of
macro which corresponds no initializer.
Cc: stable@vger.kernel.org
Fixes: 1d717123bb1a ("ALSA: firewire-lib: Avoid -Wflex-array-member-not-at-end warning")
Reported-by: Edmund Raile <edmund.raile@proton.me>
Closes: https://lore.kernel.org/r/rrufondjeynlkx2lniot26ablsltnynfaq2gnqvbiso7ds32il@qk4r6xps7jh2/
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240725155640.128442-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
This reverts commit d3155742db89df3b3c96da383c400e6ff4d23c25.
The header_length field is byte unit, thus it can not express the number of
elements in header field. It seems that the argument for counted_by
attribute can have no arithmetic expression, therefore this commit just
reverts the issued commit.
Suggested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240725161648.130404-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
The minmax infrastructure is overkill for simple constants, and can
cause huge expansions because those simple constants are then used by
other things.
For example, 'pageblock_order' is a core VM constant, but because it was
implemented using 'min_t()' and all the type-checking that involves, it
actually expanded to something like 2.5kB of preprocessor noise.
And when that simple constant was then used inside other expansions:
#define pageblock_nr_pages (1UL << pageblock_order)
#define pageblock_start_pfn(pfn) ALIGN_DOWN((pfn), pageblock_nr_pages)
and we then use that inside a 'max()' macro:
case ISOLATE_SUCCESS:
update_cached = false;
last_migrated_pfn = max(cc->zone->zone_start_pfn,
pageblock_start_pfn(cc->migrate_pfn - 1));
the end result was that one statement expanding to 253kB in size.
There are probably other cases of this, but this one case certainly
stood out.
I've added 'MIN_T()' and 'MAX_T()' macros for this kind of "core simple
constant with specific type" use. These macros skip the type checking,
and as such need to be very sparingly used only for obvious cases that
have active issues like this.
Reported-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/all/36aa2cad-1db1-4abf-8dd2-fb20484aabc3@lucifer.local/
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We have some very fancy min/max macros that have tons of sanity checking
to warn about mixed signedness etc.
This is all things that a sane compiler should warn about, but there are
no sane compiler interfaces for this, and '-Wsign-compare' is broken [1]
and not useful.
So then we compensate (some would say over-compensate) by doing the
checks manually with some truly horrid macro games.
And no, we can't just use __builtin_types_compatible_p(), because the
whole question of "does it make sense to compare these two values" is a
lot more complicated than that.
For example, it makes a ton of sense to compare unsigned values with
simple constants like "5", even if that is indeed a signed type. So we
have these very strange macros to try to make sensible type checking
decisions on the arguments to 'min()' and 'max()'.
But that can cause enormous code expansion if the min()/max() macros are
used with complicated expressions, and particularly if you nest these
things so that you get the first big expansion then expanded again.
The xen setup.c file ended up ballooning to over 50MB of preprocessed
noise that takes 15s to compile (obviously depending on the build host),
largely due to one single line.
So let's split that one single line to just be simpler. I think it ends
up being more legible to humans too at the same time. Now that single
file compiles in under a second.
Reported-and-reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/all/c83c17bb-be75-4c67-979d-54eee38774c6@lucifer.local/
Link: https://staticthinking.wordpress.com/2023/07/25/wsign-compare-is-garbage/ [1]
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Syzbot reported that a buffer state inconsistency was detected in
nilfs_btnode_create_block(), triggering a kernel bug.
It is not appropriate to treat this inconsistency as a bug; it can occur
if the argument block address (the buffer index of the newly created
block) is a virtual block number and has been reallocated due to
corruption of the bitmap used to manage its allocation state.
So, modify nilfs_btnode_create_block() and its callers to treat it as a
possible filesystem error, rather than triggering a kernel bug.
Link: https://lkml.kernel.org/r/20240725052007.4562-1-konishi.ryusuke@gmail.com
Fixes: a60be987d45d ("nilfs2: B-tree node cache")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+89cc4f2324ed37988b60@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=89cc4f2324ed37988b60
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Post my improvement of the test in e4a4ba415419 ("selftests/mm:
va_high_addr_switch: dynamically initialize testcases to enable LPA2
testing"):
The test begins to fail on 4k and 16k pages, on non-LPA2 systems. To
reduce noise in the CI systems, let us skip the test when higher address
space is not implemented.
Link: https://lkml.kernel.org/r/20240718052504.356517-1-dev.jain@arm.com
Fixes: e4a4ba415419 ("selftests/mm: va_high_addr_switch: dynamically initialize testcases to enable LPA2 testing")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It's expected that no page should be left in pcp_list after calling
zone_pcp_disable() in offline_pages(). Previously, it's observed that
offline_pages() gets stuck [1] due to some pages remaining in pcp_list.
Cause:
There is a race condition between drain_pages_zone() and __rmqueue_pcplist()
involving the pcp->count variable. See below scenario:
CPU0 CPU1
---------------- ---------------
spin_lock(&pcp->lock);
__rmqueue_pcplist() {
zone_pcp_disable() {
/* list is empty */
if (list_empty(list)) {
/* add pages to pcp_list */
alloced = rmqueue_bulk()
mutex_lock(&pcp_batch_high_lock)
...
__drain_all_pages() {
drain_pages_zone() {
/* read pcp->count, it's 0 here */
count = READ_ONCE(pcp->count)
/* 0 means nothing to drain */
/* update pcp->count */
pcp->count += alloced << order;
...
...
spin_unlock(&pcp->lock);
In this case, after calling zone_pcp_disable() though, there are still some
pages in pcp_list. And these pages in pcp_list are neither movable nor
isolated, offline_pages() gets stuck as a result.
Solution:
Expand the scope of the pcp->lock to also protect pcp->count in
drain_pages_zone(), to ensure no pages are left in the pcp list after
zone_pcp_disable()
[1] https://lore.kernel.org/linux-mm/6a07125f-e720-404c-b2f9-e55f3f166e85@fujitsu.com/
Link: https://lkml.kernel.org/r/20240723064428.1179519-1-lizhijian@fujitsu.com
Fixes: 4b23a68f9536 ("mm/page_alloc: protect PCP lists with a spinlock")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reported-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Oliver Sand reported a performance regression caused by commit
98c9daf5ae6b ("mm: memcg: guard memcg1-specific members of struct
mem_cgroup_per_node"), which puts some fields of the mem_cgroup_per_node
structure under the CONFIG_MEMCG_V1 config option. Apparently it causes a
false cache sharing between lruvec and lru_zone_size members of the
structure. Fix it by adding an explicit padding after the lruvec member.
Even though the padding is not required with CONFIG_MEMCG_V1 set, it seems
like the introduced memory overhead is not significant enough to warrant
another divergence in the mem_cgroup_per_node layout, so the padding is
added unconditionally.
Link: https://lkml.kernel.org/r/20240723171244.747521-1-roman.gushchin@linux.dev
Fixes: 98c9daf5ae6b ("mm: memcg: guard memcg1-specific members of struct mem_cgroup_per_node")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202407121335.31a10cb6-oliver.sang@intel.com
Tested-by: Oliver Sang <oliver.sang@intel.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Outline and export free_reserved_page() because modules use it and it in
turn uses page_ext_{get|put} which should not be exported. The same
result could be obtained by outlining {get|put}_page_tag_ref() but that
would have higher performance impact as these functions are used in more
performance critical paths.
Link: https://lkml.kernel.org/r/20240717212844.2749975-1-surenb@google.com
Fixes: dcfe378c81f7 ("lib: introduce support for page allocation tagging")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407080044.DWMC9N9I-lkp@intel.com/
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: <stable@vger.kernel.org> [6.10]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The decompression code parses a huffman tree and counts the number of
symbols for a given bit length. In rare cases, there may be >= 256
symbols with a given bit length, causing the unsigned char to overflow.
This causes a decompression failure later when the code tries and fails to
find the bit length for a given symbol.
Since the maximum number of symbols is 258, use unsigned short instead.
Link: https://lkml.kernel.org/r/20240717162016.1514077-1-ross.lagerwall@citrix.com
Fixes: bc22c17e12c1 ("bzip2/lzma: library support for gzip, bzip2 and lzma decompression")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
xarray can't support arbitrary page cache size. the largest and supported
page cache size is defined as MAX_PAGECACHE_ORDER by commit 099d90642a71
("mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray"). However,
it's possible to have 512MB page cache in the huge memory's collapsing
path on ARM64 system whose base page size is 64KB. 512MB page cache is
breaking the limitation and a warning is raised when the xarray entry is
split as shown in the following example.
[root@dhcp-10-26-1-207 ~]# cat /proc/1/smaps | grep KernelPageSize
KernelPageSize: 64 kB
[root@dhcp-10-26-1-207 ~]# cat /tmp/test.c
:
int main(int argc, char **argv)
{
const char *filename = TEST_XFS_FILENAME;
int fd = 0;
void *buf = (void *)-1, *p;
int pgsize = getpagesize();
int ret = 0;
if (pgsize != 0x10000) {
fprintf(stdout, "System with 64KB base page size is required!\n");
return -EPERM;
}
system("echo 0 > /sys/devices/virtual/bdi/253:0/read_ahead_kb");
system("echo 1 > /proc/sys/vm/drop_caches");
/* Open the xfs file */
fd = open(filename, O_RDONLY);
assert(fd > 0);
/* Create VMA */
buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ, MAP_SHARED, fd, 0);
assert(buf != (void *)-1);
fprintf(stdout, "mapped buffer at 0x%p\n", buf);
/* Populate VMA */
ret = madvise(buf, TEST_MEM_SIZE, MADV_NOHUGEPAGE);
assert(ret == 0);
ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_READ);
assert(ret == 0);
/* Collapse VMA */
ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE);
assert(ret == 0);
ret = madvise(buf, TEST_MEM_SIZE, MADV_COLLAPSE);
if (ret) {
fprintf(stdout, "Error %d to madvise(MADV_COLLAPSE)\n", errno);
goto out;
}
/* Split xarray entry. Write permission is needed */
munmap(buf, TEST_MEM_SIZE);
buf = (void *)-1;
close(fd);
fd = open(filename, O_RDWR);
assert(fd > 0);
fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE,
TEST_MEM_SIZE - pgsize, pgsize);
out:
if (buf != (void *)-1)
munmap(buf, TEST_MEM_SIZE);
if (fd > 0)
close(fd);
return ret;
}
[root@dhcp-10-26-1-207 ~]# gcc /tmp/test.c -o /tmp/test
[root@dhcp-10-26-1-207 ~]# /tmp/test
------------[ cut here ]------------
WARNING: CPU: 25 PID: 7560 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128
Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \
nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \
nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \
ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm fuse \
xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 virtio_net \
sha1_ce net_failover virtio_blk virtio_console failover dimlib virtio_mmio
CPU: 25 PID: 7560 Comm: test Kdump: loaded Not tainted 6.10.0-rc7-gavin+ #9
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024
pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : xas_split_alloc+0xf8/0x128
lr : split_huge_page_to_list_to_order+0x1c4/0x780
sp : ffff8000ac32f660
x29: ffff8000ac32f660 x28: ffff0000e0969eb0 x27: ffff8000ac32f6c0
x26: 0000000000000c40 x25: ffff0000e0969eb0 x24: 000000000000000d
x23: ffff8000ac32f6c0 x22: ffffffdfc0700000 x21: 0000000000000000
x20: 0000000000000000 x19: ffffffdfc0700000 x18: 0000000000000000
x17: 0000000000000000 x16: ffffd5f3708ffc70 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: ffffffffffffffc0 x10: 0000000000000040 x9 : ffffd5f3708e692c
x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff0000e0969eb8
x5 : ffffd5f37289e378 x4 : 0000000000000000 x3 : 0000000000000c40
x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000
Call trace:
xas_split_alloc+0xf8/0x128
split_huge_page_to_list_to_order+0x1c4/0x780
truncate_inode_partial_folio+0xdc/0x160
truncate_inode_pages_range+0x1b4/0x4a8
truncate_pagecache_range+0x84/0xa0
xfs_flush_unmap_range+0x70/0x90 [xfs]
xfs_file_fallocate+0xfc/0x4d8 [xfs]
vfs_fallocate+0x124/0x2f0
ksys_fallocate+0x4c/0xa0
__arm64_sys_fallocate+0x24/0x38
invoke_syscall.constprop.0+0x7c/0xd8
do_el0_svc+0xb4/0xd0
el0_svc+0x44/0x1d8
el0t_64_sync_handler+0x134/0x150
el0t_64_sync+0x17c/0x180
Fix it by correcting the supported page cache orders, different sets for
DAX and other files. With it corrected, 512MB page cache becomes
disallowed on all non-DAX files on ARM64 system where the base page size
is 64KB. After this patch is applied, the test program fails with error
-EINVAL returned from __thp_vma_allowable_orders() and the madvise()
system call to collapse the page caches.
Link: https://lkml.kernel.org/r/20240715000423.316491-1-gshan@redhat.com
Fixes: 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: <stable@vger.kernel.org> [5.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Yves-Alexis Perez reported commit 4ef9ad19e176 ("mm: huge_memory: don't
force huge page alignment on 32 bit") didn't work for x86_32 [1]. It is
because x86_32 uses CONFIG_X86_32 instead of CONFIG_32BIT.
!CONFIG_64BIT should cover all 32 bit machines.
[1] https://lore.kernel.org/linux-mm/CAHbLzkr1LwH3pcTgM+aGQ31ip2bKqiqEQ8=FQB+t2c3dhNKNHA@mail.gmail.com/
Link: https://lkml.kernel.org/r/20240712155855.1130330-1-yang@os.amperecomputing.com
Fixes: 4ef9ad19e176 ("mm: huge_memory: don't force huge page alignment on 32 bit")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reported-by: Yves-Alexis Perez <corsac@debian.org>
Tested-by: Yves-Alexis Perez <corsac@debian.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org> [6.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 3bd786f76de2 ("mm: convert do_set_pte() to set_pte_range()")
replaced do_set_pte() with set_pte_range() and that introduced a
regression in the following faulting path of non-anonymous vmas which
caused the PTE for the faulting address to be marked as old instead of
young.
handle_pte_fault()
do_pte_missing()
do_fault()
do_read_fault() || do_cow_fault() || do_shared_fault()
finish_fault()
set_pte_range()
The polarity of prefault calculation is incorrect. This leads to prefault
being incorrectly set for the faulting address. The following check will
incorrectly mark the PTE old rather than young. On some architectures
this will cause a double fault to mark it young when the access is
retried.
if (prefault && arch_wants_old_prefaulted_pte())
entry = pte_mkold(entry);
On a subsequent fault on the same address, the faulting path will see a
non NULL vmf->pte and instead of reaching the do_pte_missing() path, PTE
will then be correctly marked young in handle_pte_fault() itself.
Due to this bug, performance degradation in the fault handling path will
be observed due to unnecessary double faulting.
Link: https://lkml.kernel.org/r/20240710014539.746200-1-rtummala@nvidia.com
Fixes: 3bd786f76de2 ("mm: convert do_set_pte() to set_pte_range()")
Signed-off-by: Ram Tummala <rtummala@nvidia.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
My new address is james.clark@linaro.org
Link: https://lkml.kernel.org/r/20240709102512.31212-3-james.clark@linaro.org
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geliang Tang <geliang@kernel.org>
Cc: Hao Zhang <quic_hazha@quicinc.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Mao Jinlong <quic_jinlmao@quicinc.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Matt Ranostay <matt@ranostay.sg>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
My new address is james.clark@linaro.org
Link: https://lkml.kernel.org/r/20240709102512.31212-2-james.clark@linaro.org
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geliang Tang <geliang@kernel.org>
Cc: Hao Zhang <quic_hazha@quicinc.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Mao Jinlong <quic_jinlmao@quicinc.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Matt Ranostay <matt@ranostay.sg>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The 'single-channel' property is an uint32, not an array, so 'items' is
an incorrect constraint. This didn't matter until dtschema recently
changed how properties are decoded. This results in this warning:
Documentation/devicetree/bindings/iio/adc/adi,ad7192.example.dtb: adc@0: \
channel@1:single-channel: 1 is not of type 'array'
Fixes: caf7b7632b8d ("dt-bindings: iio: adc: ad7192: Add AD7194 support")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240723230904.1299744-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Release 2024.07.26:
Enable turbostat extensions to add both perf and PMT
(Intel Platform Monitoring Technology) counters from the cmdline.
Demonstrate PMT access with built-in support for Meteor Lake's Die%c6 counter.
This commit:
Clean up white-space nits introduced since version 2024.05.10
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Some counters, like cpu/cache-misses/, expose and require umask=%x
parameter alongside event=%x in the sysfs perf counter's event file.
This change make sure we parse and use it when opening user added
counters.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add a general description of the user interface for adding PMT
counters with the new --add pmt,... option.
Provide a complete example for requesting two counters.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Provide a definition for metadata that allows reading DC6 residency
counter via PMT and exposes it as a builtin counter.
Note that this residency counter is updated and read via
entirely different mechanisms vs the MSR-based residency counters.
On MTL processors, there are times when Die%c6 will report above 100%.
This is still useful, but don't expect 3 digits of precision...
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Allows users to read Intel PMT (Platform Monitoring Technology)
counters, providing interface similar to one used to add MSR and perf
counters. Because PMT is exposed as a raw MMIO range, without metadata,
user has to supply the necessary information to find and correctly
display the requested counter.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
Peter Zijlstra
Joel Fernandes (Google)
Daniel Bristot de Oliveira
Youssef Esmat
Tianchen Ding
Phil Auld
Chuyi Zhou
Peilin He
Zhang Qiao
Yang Yingliang
Zheng Zucheng
Linus Torvalds
Nathan Chancellor
Richard Weinberger
Jose Ignacio Tornos Martinez
Hongbo Li
Seth Forshee (DigitalOcean)
Takashi Sakamoto
Ryusuke Konishi
Dev Jain
Li Zhijian
Roman Gushchin
Suren Baghdasaryan
Ross Lagerwall
Gavin Shan
Yang Shi
Ram Tummala
James Clark
Rob Herring (Arm)
Len Brown
Patryk Wlazlyn