aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2023-06-21selftests: forwarding: pedit_dsfield: Disable IPv6 autogen on a bridgePetr Machata1-1/+3
In a future patch, mlxsw will start adding RIFs to uppers of front panel port netdevices, if they have an IP address. At the time that the front panel port is enslaved to the bridge, the bridge MAC address does not have the same prefix as other interfaces in the system. On Nvidia Spectrum-1 machines all the RIFs have to have the same 38-bit MAC address prefix. Since the bridge does not obey this limitation, the RIF cannot be created, and the enslavement attempt is vetoed on the grounds of the configuration not being offloadable. The selftest itself however checks whether skbedit changes packet priority as appropriate. The bridge thus does not need to participate in routing traffic and the IP address or the RIF are irrelevant. Fix by disabling automatic IPv6 address generation for the HW-offloaded bridge in this selftest, thus exempting it from mlxsw router attention. Since the bridge is only used for L2 forwarding, this change should not hinder usefulness of this selftest for testing SW datapath or HW datapaths in other devices. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21selftests: forwarding: skbedit_priority: Disable IPv6 autogen on a bridgePetr Machata1-1/+3
In a future patch, mlxsw will start adding RIFs to uppers of front panel port netdevices, if they have an IP address. At the time that the front panel port is enslaved to the bridge, the bridge MAC address does not have the same prefix as other interfaces in the system. On Nvidia Spectrum-1 machines all the RIFs have to have the same 38-bit MAC address prefix. Since the bridge does not obey this limitation, the RIF cannot be created, and the enslavement attempt is vetoed on the grounds of the configuration not being offloadable. The selftest itself however checks operation of pedit on IPv4 and IPv6 dsfield and its parts. The bridge thus does not need to participate in routing traffic and the IP address or the RIF are irrelevant. Fix by disabling automatic IPv6 address generation for the HW-offloaded bridge in this selftest, thus exempting it from mlxsw router attention. Since the bridge is only used for L2 forwarding, this change should not hinder usefulness of this selftest for testing SW datapath or HW datapaths in other devices. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21selftests: forwarding: dual_vxlan_bridge: Disable IPv6 autogen on bridgesPetr Machata1-0/+1
In a future patch, mlxsw will start adding RIFs to uppers of front panel port netdevices, if they have an IP address. This will cause this selftest to fail spuriously. The swp enslavement to the 802.1ad bridge is not allowed, because RIFs are not allowed to be created for 802.1ad bridges, but the address indicates one needs to be created. Fix by disabling automatic IPv6 address generation for the HW-offloaded bridge in this selftest, thus exempting it from mlxsw router attention. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21selftests: forwarding: q_in_vni: Disable IPv6 autogen on bridgesPetr Machata1-0/+1
In a future patch, mlxsw will start adding RIFs to uppers of front panel port netdevices, if they have an IP address. This will cause this selftest to fail spuriously. The swp enslavement to the 802.1ad bridge is not allowed, because RIFs are not allowed to be created for 802.1ad bridges, but the address indicates one needs to be created. Fix by disabling automatic IPv6 address generation for the HW-offloaded bridge in this selftest, thus exempting it from mlxsw router attention. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21net: micrel: Change to receive timestamp in the frame for lan8841Horatiu Vultur1-96/+154
Currently for each timestamp frame, the SW needs to go and read the received timestamp over the MDIO bus. But the HW has the capability to store the received nanoseconds part and the least significant two bits of the seconds in the reserved field of the PTP header. In this way we could save few MDIO transactions (actually a little more transactions because the access to the PTP registers are indirect) for each received frame. Instead of reading the rest of seconds part of the timestamp of the frame using MDIO transactions schedule PTP worker thread to read the seconds part every 500ms and then for each of the received frames use this information. Because if for example running with 512 frames per second, there is no point to read 512 times the second part. Doing all these changes will give a great CPU usage performance. Running ptp4l with logSyncInterval of -9 will give a ~60% CPU improvement. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platformsBartosz Golaszewski1-14/+51
sa8775p uses EMAC version 4, add the relevant defines, rename the has_emac3 switch to has_emac_ge_3 (has emac greater-or-equal than 3) and add the new compatible. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20dt-bindings: net: qcom,ethqos: add description for sa8775pBartosz Golaszewski2-1/+14
Add the compatible for the MAC controller on sa8775p platforms. This MAC works with a single interrupt so add minItems to the interrupts property. The fourth clock's name is different here so change it. Enable relevant PHY properties. Add the relevant compatibles to the binding document for snps,dwmac as well. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: stmmac: add new switch to struct plat_stmmacenet_dataBartosz Golaszewski2-1/+2
On some platforms, the PCS can be integrated in the MAC so the driver will not see any PCS link activity. Add a switch that allows the platform drivers to let the core code know. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: stmmac: dwmac-qcom-ethqos: add support for SGMIIBartosz Golaszewski1-0/+37
On sa8775p the MAC is connected to the external PHY over SGMII so add support for it to the driver. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: stmmac: dwmac-qcom-ethqos: prepare the driver for more PHY modesBartosz Golaszewski1-5/+26
In preparation for supporting SGMII, let's make the code a bit more generic. Add a new callback for MAC configuration so that we can assign a different variant of it in the future. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: stmmac: dwmac-qcom-ethqos: add support for the phyaux clockBartosz Golaszewski1-15/+16
On sa8775p, the EMAC revision is 4 and we use SGMII instead of RGMII. There's no "rgmii" clock but there's a fourth clock under a different name: "phyaux". Add a new field to the chip data struct that specifies the link clock name. Default to "rgmii" for backward compatibility. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: stmmac: dwmac-qcom-ethqos: add support for the optional serdes phyBartosz Golaszewski1-0/+37
On sa8775p platforms, there's a SGMII SerDes PHY between the MAC and external PHY that we need to enable and configure. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: stmmac: dwmac-qcom-ethqos: remove stray spaceBartosz Golaszewski1-1/+1
There's an unnecessary space in the rgmii_updatel() function, remove it. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: stmmac: dwmac-qcom-ethqos: add a newline between headersBartosz Golaszewski1-0/+1
Typically we use a newline between global and local headers so add it here as well. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: stmmac: dwmac-qcom-ethqos: add missing includeBartosz Golaszewski1-0/+1
device_get_phy_mode() is declared in linux/property.h but this header is not included. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: stmmac: dwmac-qcom-ethqos: use a helper variable for &pdev->devBartosz Golaszewski1-23/+26
Shrink code and avoid line breaks by using a helper variable for &pdev->dev. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: stmmac: dwmac-qcom-ethqos: tweak the order of local variablesBartosz Golaszewski1-1/+1
Make sure we follow the reverse-xmas tree convention. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: stmmac: dwmac-qcom-ethqos: rename a label in probe()Bartosz Golaszewski1-7/+7
The err_mem label's name is unclear. It actually should be reached on any error after stmmac_probe_config_dt() succeeds. Name it after the cleanup action that needs to be called before exiting. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: stmmac: dwmac-qcom-ethqos: shrink clock code with devresBartosz Golaszewski1-13/+11
We can use a devm action to completely drop the remove callback and use stmmac_pltfr_remove() directly for remove. We can also drop one of the goto labels. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20sfc: fix uninitialized variable useArnd Bergmann1-0/+1
The new efx_bind_neigh() function contains a broken code path when IPV6 is disabled: drivers/net/ethernet/sfc/tc_encap_actions.c:144:7: error: variable 'n' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (encap->type & EFX_ENCAP_FLAG_IPV6) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/sfc/tc_encap_actions.c:184:8: note: uninitialized use occurs here if (!n) { ^ drivers/net/ethernet/sfc/tc_encap_actions.c:144:3: note: remove the 'if' if its condition is always false if (encap->type & EFX_ENCAP_FLAG_IPV6) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/sfc/tc_encap_actions.c:141:22: note: initialize the variable 'n' to silence this warning struct neighbour *n; ^ = NULL Change it to use the existing error handling path here. Fixes: 7e5e7d800011a ("sfc: neighbour lookup for TC encap action offload") Suggested-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/20230619091215.2731541-2-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20sfc: add CONFIG_INET dependency for TC offloadArnd Bergmann1-0/+1
The driver now fails to link when CONFIG_INET is disabled, so add an explicit Kconfig dependency: ld.lld: error: undefined symbol: ip_route_output_flow >>> referenced by tc_encap_actions.c >>> drivers/net/ethernet/sfc/tc_encap_actions.o:(efx_tc_flower_create_encap_md) in archive vmlinux.a ld.lld: error: undefined symbol: ip_send_check >>> referenced by tc_encap_actions.c >>> drivers/net/ethernet/sfc/tc_encap_actions.o:(efx_gen_encap_header) in archive vmlinux.a >>> referenced by tc_encap_actions.c >>> drivers/net/ethernet/sfc/tc_encap_actions.o:(efx_gen_encap_header) in archive vmlinux.a ld.lld: error: undefined symbol: arp_tbl >>> referenced by tc_encap_actions.c >>> drivers/net/ethernet/sfc/tc_encap_actions.o:(efx_tc_netevent_event) in archive vmlinux.a >>> referenced by tc_encap_actions.c >>> drivers/net/ethernet/sfc/tc_encap_actions.o:(efx_tc_netevent_event) in archive vmlinux.a Fixes: a1e82162af0b8 ("sfc: generate encap headers for TC offload") Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306151656.yttECVTP-lkp@intel.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230619091215.2731541-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: phy-c45: Fix genphy_c45_ethtool_set_eee descriptionAndrew Lunn1-3/+6
The text has been cut/paste from genphy_c45_ethtool_get_eee but not changed to reflect it performs set. Additionally, extend the comment. This function implements the logic that eee_enabled has global control over EEE. When eee_enabled is false, no link modes will be advertised, and as a result, the MAC should not transmit LPI. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230619220332.4038924-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: remove sk_is_ipmr() and sk_is_icmpv6() helpersEric Dumazet3-19/+2
Blamed commit added these helpers for sake of detecting RAW sockets specific ioctl. syzbot complained about it [1]. Issue here is that RAW sockets could pretend there was no need to call ipmr_sk_ioctl() Regardless of inet_sk(sk)->inet_num, we must be prepared for ipmr_ioctl() being called later. This must happen from ipmr_sk_ioctl() context only. We could add a safety check in ipmr_ioctl() at the risk of breaking applications. Instead, remove sk_is_ipmr() and sk_is_icmpv6() because their name would be misleading, once we change their implementation. [1] BUG: KASAN: stack-out-of-bounds in ipmr_ioctl+0xb12/0xbd0 net/ipv4/ipmr.c:1654 Read of size 4 at addr ffffc90003aefae4 by task syz-executor105/5004 CPU: 0 PID: 5004 Comm: syz-executor105 Not tainted 6.4.0-rc6-syzkaller-01304-gc08afcdcf952 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351 print_report mm/kasan/report.c:462 [inline] kasan_report+0x11c/0x130 mm/kasan/report.c:572 ipmr_ioctl+0xb12/0xbd0 net/ipv4/ipmr.c:1654 raw_ioctl+0x4e/0x1e0 net/ipv4/raw.c:881 sock_ioctl_out net/core/sock.c:4186 [inline] sk_ioctl+0x151/0x440 net/core/sock.c:4214 inet_ioctl+0x18c/0x380 net/ipv4/af_inet.c:1001 sock_do_ioctl+0xcc/0x230 net/socket.c:1189 sock_ioctl+0x1f8/0x680 net/socket.c:1306 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f2944bf6ad9 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd8897a028 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2944bf6ad9 RDX: 0000000000000000 RSI: 00000000000089e1 RDI: 0000000000000003 RBP: 00007f2944bbac80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f2944bbad10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> The buggy address belongs to stack of task syz-executor105/5004 and is located at offset 36 in frame: sk_ioctl+0x0/0x440 net/core/sock.c:4172 This frame has 2 objects: [32, 36) 'karg' [48, 88) 'buffer' Fixes: e1d001fa5b47 ("net: ioctl: Use kernel memory on protocol ioctl callbacks") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Breno Leitao <leitao@debian.org> Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230619124336.651528-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20ipv6: fix a typo in ip6mr_sk_ioctl()Eric Dumazet1-3/+3
SIOCGETSGCNT_IN6 uses a "struct sioc_sg_req6 buffer". Unfortunately the blamed commit made hard to ensure type safety. syzbot reported: BUG: KASAN: stack-out-of-bounds in ip6mr_ioctl+0xba3/0xcb0 net/ipv6/ip6mr.c:1917 Read of size 16 at addr ffffc900039afb68 by task syz-executor937/5008 CPU: 1 PID: 5008 Comm: syz-executor937 Not tainted 6.4.0-rc6-syzkaller-01304-gc08afcdcf952 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351 print_report mm/kasan/report.c:462 [inline] kasan_report+0x11c/0x130 mm/kasan/report.c:572 ip6mr_ioctl+0xba3/0xcb0 net/ipv6/ip6mr.c:1917 rawv6_ioctl+0x4e/0x1e0 net/ipv6/raw.c:1143 sock_ioctl_out net/core/sock.c:4186 [inline] sk_ioctl+0x151/0x440 net/core/sock.c:4214 inet6_ioctl+0x1b8/0x290 net/ipv6/af_inet6.c:582 sock_do_ioctl+0xcc/0x230 net/socket.c:1189 sock_ioctl+0x1f8/0x680 net/socket.c:1306 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f255849bad9 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd06792778 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f255849bad9 RDX: 0000000000000000 RSI: 00000000000089e1 RDI: 0000000000000003 RBP: 00007f255845fc80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f255845fd10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> The buggy address belongs to stack of task syz-executor937/5008 and is located at offset 40 in frame: sk_ioctl+0x0/0x440 net/core/sock.c:4172 This frame has 2 objects: [32, 36) 'karg' [48, 88) 'buffer' Fixes: e1d001fa5b47 ("net: ioctl: Use kernel memory on protocol ioctl callbacks") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: David Ahern <dsahern@kernel.org> Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20230619072740.464528-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20octeontx2-pf: TC flower offload support for rxqueue mappingRatheesh Kannoth1-2/+12
TC rule support to offload rx queue mapping rules. Eg: tc filter add dev eth2 ingress protocol ip flower \ dst_ip 192.168.8.100 \ action skbedit queue_mapping 4 skip_sw action mirred ingress redirect dev eth5 Packets destined to 192.168.8.100 will be forwarded to rx queue 4 of eth5 interface. tc filter add dev eth2 ingress protocol ip flower \ dst_ip 192.168.8.100 \ action skbedit queue_mapping 9 skip_sw Packets destined to 192.168.8.100 will be forwarded to rx queue 4 of eth2 interface. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Link: https://lore.kernel.org/r/20230619060638.1032304-1-rkannoth@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20netlabel: Reorder fields in 'struct netlbl_domaddr6_map'Christophe JAILLET1-1/+1
Group some variables based on their sizes to reduce hole and avoid padding. On x86_64, this shrinks the size of 'struct netlbl_domaddr6_map' from 72 to 64 bytes. It saves a few bytes of memory and is more cache-line friendly. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/aa109847260e51e174c823b6d1441f75be370f01.1687083361.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20mptcp: Reorder fields in 'struct mptcp_pm_add_entry'Christophe JAILLET1-1/+1
Group some variables based on their sizes to reduce hole and avoid padding. On x86_64, this shrinks the size of 'struct mptcp_pm_add_entry' from 136 to 128 bytes. It saves a few bytes of memory and is more cache-line friendly. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/e47b71de54fd3e580544be56fc1bb2985c77b0f4.1687081558.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20mctp: Reorder fields in 'struct mctp_route'Christophe JAILLET1-2/+2
Group some variables based on their sizes to reduce hole and avoid padding. On x86_64, this shrinks the size of 'struct mctp_route' from 72 to 64 bytes. It saves a few bytes of memory and is more cache-line friendly. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/393ad1a5aef0aa28d839eeb3d7477da0e0eeb0b0.1687080803.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: fec: allow to build without PAGE_POOL_STATSLucas Stach2-1/+3
Commit 6970ef27ff7f ("net: fec: add xdp and page pool statistics") selected CONFIG_PAGE_POOL_STATS from the FEC driver symbol, making it impossible to build without the page pool statistics when this driver is enabled. The help text of those statistics mentions increased overhead. Allow the user to choose between usefulness of the statistics and the added overhead. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230616191832.2944130-1-l.stach@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20crypto: af_alg/hash: Fix recvmsg() after sendmsg(MSG_MORE)David Howells1-13/+25
If an AF_ALG socket bound to a hashing algorithm is sent a zero-length message with MSG_MORE set and then recvmsg() is called without first sending another message without MSG_MORE set to end the operation, an oops will occur because the crypto context and result doesn't now get set up in advance because hash_sendmsg() now defers that as long as possible in the hope that it can use crypto_ahash_digest() - and then because the message is zero-length, it the data wrangling loop is skipped. Fix this by handling zero-length sends at the top of the hash_sendmsg() function. If we're not continuing the previous sendmsg(), then just ignore the send (hash_recvmsg() will invent something when called); if we are continuing, then we finalise the request at this point if MSG_MORE is not set to get any error here, otherwise the send is of no effect and can be ignored. Whilst we're at it, remove the code to create a kvmalloc'd scatterlist if we get more than ALG_MAX_PAGES - this shouldn't happen. Fixes: c662b043cdca ("crypto: af_alg/hash: Support MSG_SPLICE_PAGES") Reported-by: syzbot+13a08c0bf4d212766c3c@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/000000000000b928f705fdeb873a@google.com/ Reported-by: syzbot+14234ccf6d0ef629ec1a@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/000000000000c047db05fdeb8790@google.com/ Reported-by: syzbot+4e2e47f32607d0f72d43@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/000000000000bcca3205fdeb87fb@google.com/ Reported-by: syzbot+472626bb5e7c59fb768f@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/000000000000b55d8805fdeb8385@google.com/ Signed-off-by: David Howells <dhowells@redhat.com> Reported-and-tested-by: syzbot+6efc50cc1f8d718d6cb7@syzkaller.appspotmail.com cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Link: https://lore.kernel.org/r/427646.1686913832@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: phy: mediatek: fix compile-test dependenciesArnd Bergmann1-1/+1
The new phy driver attempts to select a driver from another subsystem, but that fails when the NVMEM subsystem is disabled: WARNING: unmet direct dependencies detected for NVMEM_MTK_EFUSE Depends on [n]: NVMEM [=n] && (ARCH_MEDIATEK [=n] || COMPILE_TEST [=y]) && HAS_IOMEM [=y] Selected by [y]: - MEDIATEK_GE_SOC_PHY [=y] && NETDEVICES [=y] && PHYLIB [=y] && (ARM64 && ARCH_MEDIATEK [=n] || COMPILE_TEST [=y]) I could not see an actual compile time dependency, so presumably this is only needed for for working correctly but not technically a dependency on that particular nvmem driver implementation, so it would likely be safe to remove the select for compile testing. To keep the spirit of the original 'select', just replace this with a 'depends on' that ensures that the driver will work but does not get in the way of build testing. Fixes: 98c485eaf509b ("net: phy: add driver for MediaTek SoC built-in GE PHYs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Reviewed-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/20230616093009.3511692-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20ptp: ocp: Add .getmaxphase ptp_clock_info callbackRahul Rameshbabu1-0/+7
Add a function that advertises a maximum offset of zero supported by ptp_clock_info .adjphase in the OCP null ptp implementation. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20ptp: idt82p33: Add .getmaxphase ptp_clock_info callbackRahul Rameshbabu2-11/+11
Advertise the maximum offset the .adjphase callback is capable of supporting in nanoseconds for IDT devices. Refactor the negation of the offset stored in the register to be after the boundary check of the offset value rather than before. Boundary check based on the intended value rather than its device-specific representation. Depend on ptp_clock_adjtime for handling out-of-range offsets. ptp_clock_adjtime returns -ERANGE instead of clamping out-of-range offsets. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Min Li <min.li.xe@renesas.com> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20ptp: ptp_clockmatrix: Add .getmaxphase ptp_clock_info callbackRahul Rameshbabu2-20/+18
Advertise the maximum offset the .adjphase callback is capable of supporting in nanoseconds for IDT ClockMatrix devices. Depend on ptp_clock_adjtime for handling out-of-range offsets. ptp_clock_adjtime returns -ERANGE instead of clamping out-of-range offsets. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20net/mlx5: Add .getmaxphase ptp_clock_info callbackRahul Rameshbabu1-16/+15
Implement .getmaxphase callback of ptp_clock_info in mlx5 driver. No longer do a range check in .adjphase callback implementation. Handled by the ptp stack. Cc: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20ptp: Add .getmaxphase callback to ptp_clock_infoRahul Rameshbabu6-4/+31
Enables advertisement of the maximum offset supported by the phase control functionality of PHCs. The callback is used to return an error if an offset not supported by the PHC is used in ADJ_OFFSET. The ioctls PTP_CLOCK_GETCAPS and PTP_CLOCK_GETCAPS2 now advertise the maximum offset a PHC's phase control functionality is capable of supporting. Introduce new sysfs node, max_phase_adjustment. Cc: Jakub Kicinski <kuba@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20testptp: Add support for testing ptp_clock_info .adjphase callbackRahul Rameshbabu1-1/+18
Invoke clock_adjtime syscall with tx.modes set with ADJ_OFFSET when testptp is invoked with a phase adjustment offset value. Support seconds and nanoseconds for the offset value. Cc: Jakub Kicinski <kuba@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20testptp: Remove magic numbers related to nanosecond to second conversionRahul Rameshbabu1-2/+2
Use existing NSEC_PER_SEC declaration in place of hardcoded magic numbers. Cc: Jakub Kicinski <kuba@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Maciek Machnikowski <maciek@machnikowski.net> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20docs: ptp.rst: Add information about NVIDIA Mellanox devicesRahul Rameshbabu1-0/+13
The mlx5_core driver has implemented ptp clock driver functionality but lacked documentation about the PTP devices. This patch adds information about the Mellanox device family. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20ptp: Clarify ptp_clock_info .adjphase expects an internal servo to be usedRahul Rameshbabu2-2/+20
.adjphase expects a PHC to use an internal servo algorithm to correct the provided phase offset target in the callback. Implementation of the internal servo algorithm are defined by the individual devices. Cc: Jakub Kicinski <kuba@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-19ipv6: exthdrs: Remove redundant skb_headlen() check in ip6_parse_tlv().Kuniyuki Iwashima1-3/+0
ipv6_destopt_rcv() and ipv6_parse_hopopts() pulls these data - Hop-by-Hop/Destination Options Header : 8 - Hdr Ext Len : skb_transport_header(skb)[1] << 3 and calls ip6_parse_tlv(), so it need not check if skb_headlen() is less than skb_transport_offset(skb) + (skb_transport_header(skb)[1] << 3). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-19ipv6: exthdrs: Reload hdr only when needed in ipv6_srh_rcv().Kuniyuki Iwashima1-2/+2
We need not reload hdr in ipv6_srh_rcv() unless we call pskb_expand_head(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-19ipv6: exthdrs: Replace pskb_pull() with skb_pull() in ipv6_srh_rcv().Kuniyuki Iwashima1-5/+1
ipv6_rthdr_rcv() pulls these data - Segment Routing Header : 8 - Hdr Ext Len : skb_transport_header(skb)[1] << 3 needed by ipv6_srh_rcv(), so pskb_pull() in ipv6_srh_rcv() never fails and can be replaced with skb_pull(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-19ipv6: rpl: Remove redundant multicast tests in ipv6_rpl_srh_rcv().Kuniyuki Iwashima1-2/+1
ipv6_rpl_srh_rcv() checks if ipv6_hdr(skb)->daddr or ohdr->rpl_segaddr[i] is the multicast address with ipv6_addr_type(). We have the same check for ipv6_hdr(skb)->daddr in ipv6_rthdr_rcv(), so we need not recheck it in ipv6_rpl_srh_rcv(). Also, we should use ipv6_addr_is_multicast() for ohdr->rpl_segaddr[i] instead of ipv6_addr_type(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-19ipv6: rpl: Remove pskb(_may)?_pull() in ipv6_rpl_srh_rcv().Kuniyuki Iwashima3-26/+1
As Eric Dumazet pointed out [0], ipv6_rthdr_rcv() pulls these data - Segment Routing Header : 8 - Hdr Ext Len : skb_transport_header(skb)[1] << 3 needed by ipv6_rpl_srh_rcv(). We can remove pskb_may_pull() and replace pskb_pull() with skb_pull() in ipv6_rpl_srh_rcv(). Link: https://lore.kernel.org/netdev/CANn89iLboLwLrHXeHJucAqBkEL_S0rJFog68t7wwwXO-aNf5Mg@mail.gmail.com/ [0] Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-18gro: move the tc_ext comparison to a helperJakub Kicinski1-13/+19
The double ifdefs (one for the variable declaration and one around the code) are quite aesthetically displeasing. Factor this code out into a helper for easier wrapping. This will become even more ugly when another skb ext comparison is added in the future. The resulting machine code looks the same, the compiler seems to try to use %rax more and some blocks more around but I haven't spotted minor differences. Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-18net: phy: at803x: Use devm_regulator_get_enable_optional()Christophe JAILLET1-37/+7
Use devm_regulator_get_enable_optional() instead of hand writing it. It saves some line of code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-18dt-bindings: net: phy: gpy2xx: more precise descriptionMichael Walle1-5/+6
Mention that the interrupt line is just asserted for a random period of time, not the entire time. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Walle <mwalle@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-18ipv6: also use netdev_hold() in ip6_route_check_nh()Eric Dumazet1-4/+9
In blamed commit, we missed the fact that ip6_validate_gw() could change dev under us from ip6_route_check_nh() In this fix, I use GFP_ATOMIC in order to not pass too many additional arguments to ip6_validate_gw() and ip6_route_check_nh() only for a rarely used debug feature. syzbot reported: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 0 PID: 5006 at lib/refcount.c:31 refcount_warn_saturate+0x1d7/0x1f0 lib/refcount.c:31 Modules linked in: CPU: 0 PID: 5006 Comm: syz-executor403 Not tainted 6.4.0-rc5-syzkaller-01229-g97c5209b3d37 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 RIP: 0010:refcount_warn_saturate+0x1d7/0x1f0 lib/refcount.c:31 Code: 05 fb 8e 51 0a 01 e8 98 95 38 fd 0f 0b e9 d3 fe ff ff e8 ac d9 70 fd 48 c7 c7 00 d3 a6 8a c6 05 d8 8e 51 0a 01 e8 79 95 38 fd <0f> 0b e9 b4 fe ff ff 48 89 ef e8 1a d7 c3 fd e9 5c fe ff ff 0f 1f RSP: 0018:ffffc900039df6b8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff888026d71dc0 RSI: ffffffff814c03b7 RDI: 0000000000000001 RBP: ffff888146a505fc R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: 1ffff9200073bedc R13: 00000000ffffffef R14: ffff888146a505fc R15: ffff8880284eb5a8 FS: 0000555556c88300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004585c0 CR3: 000000002b1b1000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __refcount_dec include/linux/refcount.h:344 [inline] refcount_dec include/linux/refcount.h:359 [inline] ref_tracker_free+0x539/0x820 lib/ref_tracker.c:236 netdev_tracker_free include/linux/netdevice.h:4097 [inline] netdev_put include/linux/netdevice.h:4114 [inline] netdev_put include/linux/netdevice.h:4110 [inline] fib6_nh_init+0xb96/0x1bd0 net/ipv6/route.c:3624 ip6_route_info_create+0x10f3/0x1980 net/ipv6/route.c:3791 ip6_route_add+0x28/0x150 net/ipv6/route.c:3835 ipv6_route_ioctl+0x3fc/0x570 net/ipv6/route.c:4459 inet6_ioctl+0x246/0x290 net/ipv6/af_inet6.c:569 sock_do_ioctl+0xcc/0x230 net/socket.c:1189 sock_ioctl+0x1f8/0x680 net/socket.c:1306 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] Fixes: 70f7457ad6d6 ("net: create device lookup API with reference tracking") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: David Ahern <dsahern@kernel.org> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-18crypto: Fix af_alg_sendmsg(MSG_SPLICE_PAGES) sglist limitDavid Howells1-1/+1
When af_alg_sendmsg() calls extract_iter_to_sg(), it passes MAX_SGL_ENTS as the maximum number of elements that may be written to, but some of the elements may already have been used (as recorded in sgl->cur), so extract_iter_to_sg() may end up overrunning the scatterlist. Fix this to limit the number of elements to "MAX_SGL_ENTS - sgl->cur". Note: It probably makes sense in future to alter the behaviour of extract_iter_to_sg() to stop if "sgtable->nents >= sg_max" instead, but this is a smaller fix for now. The bug causes errors looking something like: BUG: KASAN: slab-out-of-bounds in sg_assign_page include/linux/scatterlist.h:109 [inline] BUG: KASAN: slab-out-of-bounds in sg_set_page include/linux/scatterlist.h:139 [inline] BUG: KASAN: slab-out-of-bounds in extract_bvec_to_sg lib/scatterlist.c:1183 [inline] BUG: KASAN: slab-out-of-bounds in extract_iter_to_sg lib/scatterlist.c:1352 [inline] BUG: KASAN: slab-out-of-bounds in extract_iter_to_sg+0x17a6/0x1960 lib/scatterlist.c:1339 Fixes: bf63e250c4b1 ("crypto: af_alg: Support MSG_SPLICE_PAGES") Reported-by: syzbot+6efc50cc1f8d718d6cb7@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/000000000000b2585a05fdeb8379@google.com/ Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: syzbot+6efc50cc1f8d718d6cb7@syzkaller.appspotmail.com cc: Herbert Xu <herbert@gondor.apana.org.au> cc: "David S. Miller" <davem@davemloft.net> cc: Eric Dumazet <edumazet@google.com> cc: Jakub Kicinski <kuba@kernel.org> cc: Paolo Abeni <pabeni@redhat.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: linux-crypto@vger.kernel.org cc: netdev@vger.kernel.org Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.