| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Make __thermal_zone_device_update() bail out if update_temperature()
fails to update the zone temperature because __thermal_zone_get_temp()
has returned an error and the current zone temperature is
THERMAL_TEMP_INVALID (user space receiving netlink thermal messages,
thermal debug code and thermal governors may get confused otherwise).
Fixes: 9ad18043fb35 ("thermal: core: Send trip crossing notifications at init time if needed")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
Add missing empty line of code to thermal_zone_trip_id().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
If a thermal mitigation event is in progress, its duration value has
not been updated yet, so 0 will be printed as the event duration by
tze_seq_show() which is confusing.
Avoid doing that by marking the beginning of the event with the
KTIME_MIN duration value and making tze_seq_show() compute the current
event duration on the fly, in which case '>' will be printed instead of
'=' in the event duration value field.
Similarly, for trip points that have been crossed on the down, mark
the end of mitigation with the KTIME_MAX timestamp value and make
tze_seq_show() compute the current duration on the fly for the trip
points still involved in the mitigation, in which cases the duration
value printed by it will be prepended with a '>' character.
Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
If cdev_dt_seq_show() runs before the first state transition of a cooling
device, it will not print any state residency information for it, even
though it might be reasonably expected to print residency information for
the initial state of the cooling device.
For this reason, rearrange the code to get the initial state of a cooling
device at the registration time and pass it to thermal_debug_cdev_add(),
so that the latter can create a duration record for that state which will
allow cdev_dt_seq_show() to print its residency information.
Fixes: 755113d76786 ("thermal/debugfs: Add thermal cooling device debugfs information")
Reported-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
Because thermal_debug_cdev_state_update() only creates a duration record
for the old state of a cooling device, if its new state is used for the
first time, there will be no record for it and cdev_dt_seq_show() will
not print the duration information for it even though it contains code
to compute the duration value in that case.
Address this by making thermal_debug_cdev_state_update() create a
duration record for the new state if there is none.
Fixes: 755113d76786 ("thermal/debugfs: Add thermal cooling device debugfs information")
Reported-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
Since thermal_debug_cdev_remove() does not run under cdev->lock, it can
run in parallel with thermal_debug_cdev_state_update() and it may free
the struct thermal_debugfs object used by the latter after it has been
checked against NULL.
If that happens, thermal_debug_cdev_state_update() will access memory
that has been freed already causing the kernel to crash.
Address this by using cdev->lock in thermal_debug_cdev_remove() around
the cdev->debugfs value check (in case the same cdev is removed at the
same time in two different threads) and its reset to NULL.
Fixes: 755113d76786 ("thermal/debugfs: Add thermal cooling device debugfs information")
Cc :6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
With the current thermal zone locking arrangement in the debugfs code,
user space can open the "mitigations" file for a thermal zone before
the zone's debugfs pointer is set which will result in a NULL pointer
dereference in tze_seq_start().
Moreover, thermal_debug_tz_remove() is not called under the thermal
zone lock, so it can run in parallel with the other functions accessing
the thermal zone's struct thermal_debugfs object. Then, it may clear
tz->debugfs after one of those functions has checked it and the
struct thermal_debugfs object may be freed prematurely.
To address the first problem, pass a pointer to the thermal zone's
struct thermal_debugfs object to debugfs_create_file() in
thermal_debug_tz_add() and make tze_seq_start(), tze_seq_next(),
tze_seq_stop(), and tze_seq_show() retrieve it from s->private
instead of a pointer to the thermal zone object. This will ensure
that tz_debugfs will be valid across the "mitigations" file accesses
until thermal_debugfs_remove_id() called by thermal_debug_tz_remove()
removes that file.
To address the second problem, use tz->lock in thermal_debug_tz_remove()
around the tz->debugfs value check (in case the same thermal zone is
removed at the same time in two different threads) and its reset to NULL.
Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Cc :6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
Because thermal_debug_tz_remove() does not free all memory allocated for
thermal zone diagnostics, some of that memory becomes unreachable after
freeing the thermal zone's struct thermal_debugfs object.
Address this by making thermal_debug_tz_remove() free all of the memory
in question.
Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Cc :6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
Add a wrapper around the .trip_crossed() governor callback invocation
to reduce code duplications slightly and improve the code layout in
__thermal_zone_device_update().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
Currently, tze_seq_show() output includes all of the trips in the zone
except for critical ones, including invalid trips and trips with no stats
which is confusing.
Make it skip the trips for which there is not mitigation information.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Rename thermal_debug_update_temp() to thermal_debug_update_trip_stats()
which is a better match for the purpose of the function.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Notice that it is not necessary to compute tze in every iteration of the
for () loop in thermal_debug_update_temp() because it is the same for all
trips, so compute it once before the loop starts.
Also use a trip_stats local variable to make the code in that loop easier
to follow and move the trip_id variable definition into that loop because
it is not used elsewhere in the function.
While at it, change to order of local variable definitions in the function
to follow the reverse-xmas-tree pattern.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Since thermal_debug_update_temp() is called before invoking
thermal_debug_tz_trip_down() for the trips that were crossed by the
zone temperature on the way up, it updates the statistics for them
as though the current zone temperature was above the low temperature
of each of them. However, if a given trip has just been crossed on the
way down, the zone temperature is in fact below its low temperature,
but this is handled by thermal_debug_tz_trip_down() running after the
update of the trip statistics.
The remedy is to call thermal_debug_update_temp() after
thermal_debug_tz_trip_down() has been invoked for all of the
trips in question, but then thermal_debug_tz_trip_up() needs to
be adjusted, so it does not update the statistics for the trips
that has just been crossed on the way up, as that will be taken
care of by thermal_debug_update_temp() down the road.
Modify the code accordingly.
Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Modify handle_thermal_trip() to call handle_critical_trips() only after
finding that the trip temperature has been crossed on the way up and
remove the redundant temperature check from the latter.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Since all of the governors in the tree have been switched over to using
the new callbacks, either .trip_crossed() or .manage(), the .throttle()
governor callback is not used any more, so drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Notifying user space about trip points that have not been crossed is
not particularly useful, so modify the User Space governor to use the
.trip_crossed() callback, which is only invoked for trips that have been
crossed, instead of .throttle() that is invoked for all trips in a
thermal zone every time the zone is updated.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The computations carried out by fair_share_throttle() for each trip
point include at least one redundant integer division which introduces
superfluous rounding errors. Also the multiplications by 100 in it are
not really necessary and can be eliminated.
Rearrange fair_share_throttle() to carry out only one integer division per
trip and only as many integer multiplications as necessary and rename one
variable in it (while at it).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
In principle, the Fair Share governor should take trip hysteresis
into account. After all, once a trip has been crossed on the way up,
mitigation is still needed until it is crossed on the way down.
For this reason, make it use trip thresholds that are computed by
the core when trips are crossed, so as to apply mitigations if the
zone temperature is in a hysteresis rage of one or more trips that
were crossed on the way up, but have not been crossed on the way
down yet.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
The Fair Share governor tries very hard to be stateless and so it
calls get_trip_level() from fair_share_throttle() every time, even
though the number produced by this function for all of the trips
during a given thermal zone update is actually the same. Since
get_trip_level() walks all of the trips in the thermal zone every
time it is called, doing this may generate quite a bit of completely
useless overhead.
For this reason, make the governor use the new .manage() callback
instead of .throttle() which allows it to call get_trip_level() just
once and use the value computed by it to handle all of the trips.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
Do some assorted cleanups in thermal_zone_trip_update():
* Compute the trend value upfront.
* Move old_target definition to the block where it is used.
* Adjust white space around diagnostic messages and locking.
* Use suitable field formatting in a message to avoid an explicit
cast to int.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
In principle, the Step-Wise governor should take trip hysteresis into
account. After all, once a trip has been crossed on the way up,
mitigation is still needed until it is crossed on the way down.
For this reason, make it use trip thresholds that are computed by
the core when trips are crossed, so as to apply mitigations in the
hysteresis rages of trips that were crossed on the way up, but have
not been crossed on the way down yet.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Make the Step-Wise governor use the new .manage() callback instead of
.throttle().
Even though using .throttle() is not particularly problematic for the
Step-Wise governor, using .manage() instead still allows it to reduce
overhead by updating all of the cooling devices once after setting
target values for all of the thermal instances.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Notice that the passive field in struct thermal_zone_device is not
used by the Power Allocator governor itself and so the ordering of
its updates with respect to allow_maximum_power() or allocate_power()
does not matter.
Accordingly, make power_allocator_manage() update that field right
before returning, which allows the current value of it to be passed
directly to allow_maximum_power() without using the additional update
variable that can be dropped.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
The Power Allocator governor really only wants to be called once per
thermal zone update and it does a special check to skip the extra,
from its perspective, invocations of the .throttle() callback.
Make it use .manage() instead of .throttle().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
|
|
Introduce a new thermal governor callback called .manage() that will be
invoked once per thermal zone update after processing all of the trip
points in the core.
This will allow governors that look at multiple trip points together
to check all of them in a consistent configuration, so they don't need
to play tricks with skipping .throttle() invocations that they are not
interested in and they can avoid carrying out the same computations for
multiple times in one cycle.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Fold thermal_zone_trip_update() into bang_bang_control() which is the
only caller of it to reduce code size and make it easier to follow.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Do the following cleanups in thermal_zone_trip_update():
* Drop the useless "zero hysteresis" message.
* Eliminate the trip_index local variable that is redundant.
* Drop 2 comments that are not useful.
* Downgrade a diagnostic message from pr_warn() to pr_debug().
* Use consistent field formatting in diagnostic messages.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The Bang-Bang governor really is only concerned about trip point
crossing, so it can use the new .trip_crossed() callback instead of
.throttle() that is not particularly suitable for it.
Modify it to do so which also takes trip hysteresis into account, so the
governor does not need to use it directly any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The Loongson-2K2000 and Loongson-2K1000 have similar thermal sensors,
except that the temperature is read differently.
In particular, the temperature output registers of the Loongson-2K2000
are defined in the chip configuration domain and are read in a different
way.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/fdbfdcc3231a36a4ee0bcf1377ddcbd6f8c944b5.1713837379.git.zhoubinbin@loongson.cn
|
|
The temperature output register of the Loongson-2K2000 is defined in the
chip configuration domain, which is different from the Loongson-2K1000,
so it can't be fallbacked.
We need to use two groups of registers to describe it: the first group
is the high and low temperature threshold setting register; the second
group is the temperature output register.
It is true that this fix will cause ABI corruption, but it is necessary
otherwise the Loongson-2K2000 temperature sensor will not work properly.
Fixes: 72684d99a854 ("thermal: dt-bindings: add loongson-2 thermal")
Cc: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/5198999d679f1a1c3457385acb9fadfc85da1f1e.1713837379.git.zhoubinbin@loongson.cn
|
|
The thermal on the Loongson-2K0500 shares the design with the
Loongson-2K1000. Define corresponding compatible string, having the
loongson,ls2k1000-thermal as a fallback.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/26524a63abd2d032e4c45efe6ce3fedb46841768.1713837379.git.zhoubinbin@loongson.cn
|
|
Here are some minor code style adjustment. Such as fix whitespace code
style; align function call arguments to opening parenthesis.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/ccca50f2ad3fd8c84fcbfcb1f875427ea7f637a0.1713837379.git.zhoubinbin@loongson.cn
|
|
Various values extracted from the vendor's kernel driver.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-15-nico@fluxnic.net
|
|
Add LVTS thermal controller definition for MT8188.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-13-nico@fluxnic.net
|
|
Some systems don't always populate sensor controller slots starting
at slot 0. Use a bitmap instead of a count to indicate valid sensor
slots. Also create a pretty iterator for that.
About that iterator: it causes checkpatch to complain with "ERROR:
Macros with multiple statements should be enclosed in a do - while
loop". However this is not possible here. And many similar iterators
do exist using the same form in the tree already.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-12-nico@fluxnic.net
|
|
The golden temperature calibration value in nvram is not always the
3rd byte. A future commit will prove this assumption wrong.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-11-nico@fluxnic.net
|
|
Various values extracted from the vendor's kernel driver.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-9-nico@fluxnic.net
|
|
Add LVTS thermal controller definition for MT8186.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-7-nico@fluxnic.net
|
|
We don't want to silently fetch garbage past the actual buffer.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-6-nico@fluxnic.net
|
|
Current code assumes calibration values are always stored contiguously
in host endian order. A future patch will prove this wrong.
Let's specify the offset for each calibration byte instead.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-5-nico@fluxnic.net
|
|
All the .hw_tshut_temp instances are initialized with the same value.
Let's remove those and use a common definition instead. If ever a
different value must be used in the future then an override parameter
could be added back.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-4-nico@fluxnic.net
|
|
Move efuse data interpretation inside lvts_golden_temp_init() alongside
the actual code retrieving wanted value.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-3-nico@fluxnic.net
|
|
Calibration values are 24-bit wide. Those values so far appear to span
only 16 bits but let's not push our luck.
Found while looking at the original Mediatek driver code.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-2-nico@fluxnic.net
|
|
In "struct k3_bandgap", the 'conf' field is unused.
Remove it.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/206d39bed9ec6df9b4d80b1fc064e499389fc7fc.1712687420.git.christophe.jaillet@wanadoo.fr
|
|
In "struct qpnp_tm_chip", the 'prev_stage' field is unused.
Remove it.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/d1c3a3c455f485dae46290e3488daf1dcc1d355a.1712687589.git.christophe.jaillet@wanadoo.fr
|
|
compute_intercept_slope() is called from calibrate_8960() (in tsens-8960.c)
as compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB) which lead to null
pointer dereference (if DEBUG or DYNAMIC_DEBUG set).
Fix this bug by adding null pointer check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: dfc1193d4dbd ("thermal/drivers/tsens: Replace custom 8960 apis with generic apis")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240411114021.12203-1-amishin@t-argos.ru
|
|
In order for lvts_raw_to_temp to function properly on mt8192,
temperature coefficients for mt8192 need to be added.
Fixes: 288732242db4 ("thermal/drivers/mediatek/lvts_thermal: Add mt8192 support")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240416-lvts_thermal-v2-1-f8a36882cc53@chromium.org
|
|
The initial driver used a formula to approximate the temperature and
register values reversed engineered from an out-of-tree BSP driver. This
was needed as the datasheet at the time did not contain any information
on how to do this. Later Gen3 (Rev 2.30) and Gen4 (all) now contains
this information.
Update the approximation formula to use the datasheet's information
instead of the reversed-engineered one.
On an idle M3-N without fused calibration values for PTAT and THCODE the
old formula reports,
zone0: 52000
zone1: 53000
zone2: 52500
While the new formula under the same circumstances reports,
zone0: 52500
zone1: 54000
zone2: 54000
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240327133013.3982199-3-niklas.soderlund+renesas@ragnatech.se
|
|
The calculated Tj_T constant is calculated from the PTAT data either
read from the first TSC zone on the device if calibration data is fused,
or from fallback values in the driver itself. The value calculated is
shared among all TSC zones.
Move the Tj_T constant to the shared private data structure instead of
duplicating it in each TSC private data. This requires adding a pointer
to the shared data to the TSC private data structure. This back pointer
make it easier to further rework the temperature conversion logic.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240327133013.3982199-2-niklas.soderlund+renesas@ragnatech.se
|
|
In comparison to other Amlogic chips, there is one key difference.
The offset for the sec_ao base, also known as u_efuse_off, is special,
while other aspects remain the same.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240328191322.17551-3-ddrokosov@salutedevices.com
|
Rafael J. Wysocki
Binbin Zhou
Nicolas Pitre
Nicolas Pitre
Christophe JAILLET
Aleksandr Mishin
Hsin-Te Yuan
Niklas Söderlund
Dmitry Rokosov