| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 3c8ba0d61d04 ("kernel.h: Retain constant expression output for
max()/min()") rewrote our min/max macros to be very clever, but in the
meantime resurrected a variable name shadow issue that we had had
previously fixed in commit 589a9785ee3a ("min/max: remove sparse
warnings when they're nested").
That commit talks about the sparse warnings that this shadowing causes,
which we ignored as just a minor annoyance. But it turns out that the
sparse warning is the least of our problems. We actually have a real
bug due to the shadowing through the interaction with "min_not_zero()",
which ends up doing
min(__x, __y)
internally, and then the new declaration of "__x" and "__y" as new
variables in __cmp_once() results in a complete mess of an expression,
and "min_not_zero()" doesn't work at all.
For some odd reason, this only ever caused (reported) problems on s390,
even though it is a generic issue and most of the (obviously successful)
testing of the problematic commit had happened on other architectures.
Quoting Sebastian Ott:
"What happened is that the bio build by the partition detection code
was attempted to be split by the block layer because the block queue
had a max_sector setting of 0. blk_queue_max_hw_sectors uses
min_not_zero."
So re-introduce the use of __UNIQUE_ID() to make sure that the min/max
macros do not have these kinds of clashes.
[ That said, __UNIQUE_ID() itself has several issues that make it less
than wonderful.
In particular, the "uniqueness" has a fallback on the line number,
which means that it's not actually unique in more complex cases if you
don't build with gcc or clang (which have working unique counters that
aren't tied to line numbers).
That historical broken fallback also means that we have that pointless
"prefix" argument that doesn't actually make much sense _except_ for
the known-broken case. Oh well. ]
Fixes: 3c8ba0d61d04 ("kernel.h: Retain constant expression output for max()/min()")
Reported-and-tested-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Stephen reports that an x86 allmodconfig build fails to build the
of_pmem driver due to a missing definition of of_node_to_nid(). That
helper is currently only exported in the OF_NUMA=y case. In other cases,
ppc and sparc, it is a weak symbol, and outside of those platforms it is
a static inline.
Until an OF_NUMA=n configuration can reliably support usage of
of_node_to_nid() in modules across architectures, mark this driver as
'bool' instead of 'tristate'.
Cc: Rob Herring <robh@kernel.org>
Cc: Oliver O'Halloran <oohall@gmail.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
snd_pcm_hw_params() (more exactly snd_pcm_hw_params_choose()) contains
a check of the return error from snd_pcm_hw_param_first() and _last()
with snd_BUG_ON() -- i.e. it may trigger WARN_ON() depending on the
kconfig.
This was a valid check in the past, as these functions shouldn't
return any error if the parameters have been already refined via
snd_pcm_hw_refine() beforehand. However, the recent rewrite
introduced a kmalloc() in snd_pcm_hw_refine() for removing VLA, and
this brought a possibility to trigger an error. As a result, syzbot
caught lots of superfluous kernel WARN_ON() and paniced via fault
injection.
As the WARN_ON() is no longer valid with the introduction of
kmalloc(), let's drop snd_BUG_ON() check, in order to make the world
peaceful place again.
Reported-by: syzbot+803e0047ac3a3096bb4f@syzkaller.appspotmail.com
Fixes: 5730f9f744cf ("ALSA: pcm: Remove VLA usage")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
handle_tx will delay rx for tens or even hundreds of milliseconds when tx busy
polling udp packets with small length(e.g. 1byte udp payload), because setting
VHOST_NET_WEIGHT takes into account only sent-bytes but no single packet length.
Ping-Latencies shown below were tested between two Virtual Machines using
netperf (UDP_STREAM, len=1), and then another machine pinged the client:
vq size=256
Packet-Weight Ping-Latencies(millisecond)
min avg max
Origin 3.319 18.489 57.303
64 1.643 2.021 2.552
128 1.825 2.600 3.224
256 1.997 2.710 4.295
512 1.860 3.171 4.631
1024 2.002 4.173 9.056
2048 2.257 5.650 9.688
4096 2.093 8.508 15.943
vq size=512
Packet-Weight Ping-Latencies(millisecond)
min avg max
Origin 6.537 29.177 66.245
64 2.798 3.614 4.403
128 2.861 3.820 4.775
256 3.008 4.018 4.807
512 3.254 4.523 5.824
1024 3.079 5.335 7.747
2048 3.944 8.201 12.762
4096 4.158 11.057 19.985
Seems pretty consistent, a small dip at 2 VQ sizes.
Ring size is a hint from device about a burst size it can tolerate. Based on
benchmarks, set the weight to 2 * vq size.
To evaluate this change, another tests were done using netperf(RR, TX) between
two machines with Intel(R) Xeon(R) Gold 6133 CPU @ 2.50GHz, and vq size was
tweaked through qemu. Results shown below does not show obvious changes.
vq size=256 TCP_RR vq size=512 TCP_RR
size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize%
1/ 1/ -7%/ -2% 1/ 1/ 0%/ -2%
1/ 4/ +1%/ 0% 1/ 4/ +1%/ 0%
1/ 8/ +1%/ -2% 1/ 8/ 0%/ +1%
64/ 1/ -6%/ 0% 64/ 1/ +7%/ +3%
64/ 4/ 0%/ +2% 64/ 4/ -1%/ +1%
64/ 8/ 0%/ 0% 64/ 8/ -1%/ -2%
256/ 1/ -3%/ -4% 256/ 1/ -4%/ -2%
256/ 4/ +3%/ +4% 256/ 4/ +1%/ +2%
256/ 8/ +2%/ 0% 256/ 8/ +1%/ -1%
vq size=256 UDP_RR vq size=512 UDP_RR
size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize%
1/ 1/ -5%/ +1% 1/ 1/ -3%/ -2%
1/ 4/ +4%/ +1% 1/ 4/ -2%/ +2%
1/ 8/ -1%/ -1% 1/ 8/ -1%/ 0%
64/ 1/ -2%/ -3% 64/ 1/ +1%/ +1%
64/ 4/ -5%/ -1% 64/ 4/ +2%/ 0%
64/ 8/ 0%/ -1% 64/ 8/ -2%/ +1%
256/ 1/ +7%/ +1% 256/ 1/ -7%/ 0%
256/ 4/ +1%/ +1% 256/ 4/ -3%/ -4%
256/ 8/ +2%/ +2% 256/ 8/ +1%/ +1%
vq size=256 TCP_STREAM vq size=512 TCP_STREAM
size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize%
64/ 1/ 0%/ -3% 64/ 1/ 0%/ 0%
64/ 4/ +3%/ -1% 64/ 4/ -2%/ +4%
64/ 8/ +9%/ -4% 64/ 8/ -1%/ +2%
256/ 1/ +1%/ -4% 256/ 1/ +1%/ +1%
256/ 4/ -1%/ -1% 256/ 4/ -3%/ 0%
256/ 8/ +7%/ +5% 256/ 8/ -3%/ 0%
512/ 1/ +1%/ 0% 512/ 1/ -1%/ -1%
512/ 4/ +1%/ -1% 512/ 4/ 0%/ 0%
512/ 8/ +7%/ -5% 512/ 8/ +6%/ -1%
1024/ 1/ 0%/ -1% 1024/ 1/ 0%/ +1%
1024/ 4/ +3%/ 0% 1024/ 4/ +1%/ 0%
1024/ 8/ +8%/ +5% 1024/ 8/ -1%/ 0%
2048/ 1/ +2%/ +2% 2048/ 1/ -1%/ 0%
2048/ 4/ +1%/ 0% 2048/ 4/ 0%/ -1%
2048/ 8/ -2%/ 0% 2048/ 8/ 5%/ -1%
4096/ 1/ -2%/ 0% 4096/ 1/ -2%/ 0%
4096/ 4/ +2%/ 0% 4096/ 4/ 0%/ 0%
4096/ 8/ +9%/ -2% 4096/ 8/ -5%/ -1%
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Haibin Zhang <haibinzhang@tencent.com>
Signed-off-by: Yunfang Tai <yunfangtai@tencent.com>
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is too expensive to pass u64 values via linked list, instead
allocate array for them by overall number of mac addresses from netdev.
This eventually removes multiple kmalloc() calls, aviod memory
fragmentation and allow to put single null check on kmalloc
return value in order to prevent a potential null pointer dereference.
Addresses-Coverity-ID: 1467429 ("Dereference null return value")
Fixes: 37c3347eb247 ("net: thunderx: add ndo_set_rx_mode callback implementation for VF")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot/KMSAN reported that p->dtime was read while it was
not yet initialized in :
delta = (__u32)jiffies - p->dtime;
if (delta < ttl || !refcount_dec_if_one(&p->refcnt))
gc_stack[i] = NULL;
This is a false positive, because the inetpeer wont be erased
from rb-tree if the refcount_dec_if_one(&p->refcnt) does not
succeed. And this wont happen before first inet_putpeer() call
for this inetpeer has been done, and ->dtime field is written
exactly before the refcount_dec_and_test(&p->refcnt).
The KMSAN report was :
BUG: KMSAN: uninit-value in inet_peer_gc net/ipv4/inetpeer.c:163 [inline]
BUG: KMSAN: uninit-value in inet_getpeer+0x1567/0x1e70 net/ipv4/inetpeer.c:228
CPU: 0 PID: 9494 Comm: syz-executor5 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
inet_peer_gc net/ipv4/inetpeer.c:163 [inline]
inet_getpeer+0x1567/0x1e70 net/ipv4/inetpeer.c:228
inet_getpeer_v4 include/net/inetpeer.h:110 [inline]
icmpv4_xrlim_allow net/ipv4/icmp.c:330 [inline]
icmp_send+0x2b44/0x3050 net/ipv4/icmp.c:725
ip_options_compile+0x237c/0x29f0 net/ipv4/ip_options.c:472
ip_rcv_options net/ipv4/ip_input.c:284 [inline]
ip_rcv_finish+0xda8/0x16d0 net/ipv4/ip_input.c:365
NF_HOOK include/linux/netfilter.h:288 [inline]
ip_rcv+0x119d/0x16f0 net/ipv4/ip_input.c:493
__netif_receive_skb_core+0x47cf/0x4a80 net/core/dev.c:4562
__netif_receive_skb net/core/dev.c:4627 [inline]
netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701
netif_receive_skb+0x230/0x240 net/core/dev.c:4725
tun_rx_batched drivers/net/tun.c:1555 [inline]
tun_get_user+0x6d88/0x7580 drivers/net/tun.c:1962
tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990
do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776
do_iter_write+0x30d/0xd40 fs/read_write.c:932
vfs_writev fs/read_write.c:977 [inline]
do_writev+0x3c9/0x830 fs/read_write.c:1012
SYSC_writev+0x9b/0xb0 fs/read_write.c:1085
SyS_writev+0x56/0x80 fs/read_write.c:1082
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x455111
RSP: 002b:00007fae0365cba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 000000000000002e RCX: 0000000000455111
RDX: 0000000000000001 RSI: 00007fae0365cbf0 RDI: 00000000000000fc
RBP: 0000000020000040 R08: 00000000000000fc R09: 0000000000000000
R10: 000000000000002e R11: 0000000000000293 R12: 00000000ffffffff
R13: 0000000000000658 R14: 00000000006fc8e0 R15: 0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmem_cache_alloc+0xaab/0xb90 mm/slub.c:2756
inet_getpeer+0xed8/0x1e70 net/ipv4/inetpeer.c:210
inet_getpeer_v4 include/net/inetpeer.h:110 [inline]
ip4_frag_init+0x4d1/0x740 net/ipv4/ip_fragment.c:153
inet_frag_alloc net/ipv4/inet_fragment.c:369 [inline]
inet_frag_create net/ipv4/inet_fragment.c:385 [inline]
inet_frag_find+0x7da/0x1610 net/ipv4/inet_fragment.c:418
ip_find net/ipv4/ip_fragment.c:275 [inline]
ip_defrag+0x448/0x67a0 net/ipv4/ip_fragment.c:676
ip_check_defrag+0x775/0xda0 net/ipv4/ip_fragment.c:724
packet_rcv_fanout+0x2a8/0x8d0 net/packet/af_packet.c:1447
deliver_skb net/core/dev.c:1897 [inline]
deliver_ptype_list_skb net/core/dev.c:1912 [inline]
__netif_receive_skb_core+0x314a/0x4a80 net/core/dev.c:4545
__netif_receive_skb net/core/dev.c:4627 [inline]
netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701
netif_receive_skb+0x230/0x240 net/core/dev.c:4725
tun_rx_batched drivers/net/tun.c:1555 [inline]
tun_get_user+0x6d88/0x7580 drivers/net/tun.c:1962
tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990
do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776
do_iter_write+0x30d/0xd40 fs/read_write.c:932
vfs_writev fs/read_write.c:977 [inline]
do_writev+0x3c9/0x830 fs/read_write.c:1012
SYSC_writev+0x9b/0xb0 fs/read_write.c:1085
SyS_writev+0x56/0x80 fs/read_write.c:1082
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The datasheet specifies a 3uS pause after performing a software
reset. The default implementation of genphy_soft_reset() does not
provide this, so implement soft_reset with the needed pause.
Signed-off-by: Esben Haabendal <eha@deif.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This resolves race during initialization where the resources with
ops are registered before driver and the structures used by occ_get
op is initialized. So keep occ_get callbacks registered only when
all structs are initialized.
The example flows, as it is in mlxsw:
1) driver load/asic probe:
mlxsw_core
-> mlxsw_sp_resources_register
-> mlxsw_sp_kvdl_resources_register
-> devlink_resource_register IDX
mlxsw_spectrum
-> mlxsw_sp_kvdl_init
-> mlxsw_sp_kvdl_parts_init
-> mlxsw_sp_kvdl_part_init
-> devlink_resource_size_get IDX (to get the current setup
size from devlink)
-> devlink_resource_occ_get_register IDX (register current
occupancy getter)
2) reload triggered by devlink command:
-> mlxsw_devlink_core_bus_device_reload
-> mlxsw_sp_fini
-> mlxsw_sp_kvdl_fini
-> devlink_resource_occ_get_unregister IDX
(struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get
which is using mlxsw_sp would cause use-after free)
-> mlxsw_sp_init
-> mlxsw_sp_kvdl_init
-> mlxsw_sp_kvdl_parts_init
-> mlxsw_sp_kvdl_part_init
-> devlink_resource_size_get IDX (to get the current setup
size from devlink)
-> devlink_resource_occ_get_register IDX (register current
occupancy getter)
Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current (mildly evil) fsl_pq_mdio code uses an undocumented shadow of
the TBIPA register on LS1021A, which happens to be read-only.
Changing TBI PHY address therefore does not work on LS1021A.
The real (and documented) address of the TBIPA registere lies in the eTSEC
block and not in MDIO/MII, which is read/write, so using that fixes
the problem.
Signed-off-by: Esben Haabendal <eha@deif.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This introduces a simpler and generic method for for finding (and mapping)
the TBIPA register.
Instead of relying of complicated logic for finding the TBIPA register
address based on the MDIO or MII register block base
address, which even in some cases relies on undocumented shadow registers,
a second "reg" entry for the mdio bus devicetree node specifies the TBIPA
register.
Backwards compatibility is kept, as the existing logic is applied when
only a single "reg" mapping is specified.
Signed-off-by: Esben Haabendal <eha@deif.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When resetting the ibmvnic driver after a partition migration occurs
there is no requirement to do a reset of the main CRQ. The current
driver code does the required re-enable of the main CRQ, then does
a reset of the main CRQ later.
What we should be doing for a driver reset after a migration is to
re-enable the main CRQ, release all the sub-CRQs, and then allocate
new sub-CRQs after capability negotiation.
This patch updates the handling of mobility resets to do the proper
work and not reset the main CRQ. To do this the initialization/reset
of the main CRQ had to be moved out of the ibmvnic_init routine
and in to the ibmvnic_probe and do_reset routines.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a failover case for a non-redundant pseries VNIC
configuration that was not being handled properly. The current
implementation assumes that the driver will always have a redandant
device to communicate with following a failover notification. There
are cases, however, when a non-redundant configuration can receive
a failover request. If that happens, the driver should wait until
it receives a signal that the device is ready for operation.
The driver is agnostic of its backing hardware configuration,
so this fix necessarily affects all device failover management.
The driver needs to wait until it receives a signal that the device
is ready for resetting. A flag is introduced to track this intermediary
state where the driver is waiting for an active device.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some cases, if the driver is waiting for a reset following
a device parameter change, failure to schedule a reset can result
in a hang since a completion signal is never sent.
If the device configuration is being altered by a tool such
as ethtool or ifconfig, it could cause the console to hang
if the reset request does not get scheduled. Add some additional
error handling code to exit the wait_for_completion if there is
one in progress.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The counter that tracks used TX descriptors pending completion
needs to be zeroed as part of a device reset. This change fixes
a bug causing transmit queues to be stopped unnecessarily and in
some cases a transmit queue stall and timeout reset. If the counter
is not reset, the remaining descriptors will not be "removed",
effectively reducing queue capacity. If the queue is over half full,
it will cause the queue to stall if stopped.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix some mistakes caught by the DMA debugger. The first change
fixes a unnecessary unmap that should have been removed in an
earlier update. The next hunk fixes another bad unmap by zeroing
the bit checked to determine that an unmap is needed. The final
change fixes some buffers that are unmapped with the wrong
direction specified.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 4b2e6877b879 ("tipc: Fix namespace violation in tipc_sk_fill_sock_diag")
tried to fix the crash but failed, the crash is still 100% reproducible
with it.
In tipc_sk_fill_sock_diag(), skb is the diag dump we are filling, it is not
correct to retrieve its NETLINK_CB(), instead, like other protocol diag,
we should use NETLINK_CB(cb->skb).sk here.
Reported-by: <syzbot+326e587eff1074657718@syzkaller.appspotmail.com>
Fixes: 4b2e6877b879 ("tipc: Fix namespace violation in tipc_sk_fill_sock_diag")
Fixes: c30b70deb5f4 (tipc: implement socket diagnostics for AF_TIPC)
Cc: GhantaKrishnamurthy MohanKrishna <mohan.krishna.ghanta.krishnamurthy@ericsson.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check must happen before call to ipv6_addr_v4mapped()
syzbot report was :
BUG: KMSAN: uninit-value in sctp_sockaddr_af net/sctp/socket.c:359 [inline]
BUG: KMSAN: uninit-value in sctp_do_bind+0x60f/0xdc0 net/sctp/socket.c:384
CPU: 0 PID: 3576 Comm: syzkaller968804 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
sctp_sockaddr_af net/sctp/socket.c:359 [inline]
sctp_do_bind+0x60f/0xdc0 net/sctp/socket.c:384
sctp_bind+0x149/0x190 net/sctp/socket.c:332
inet6_bind+0x1fd/0x1820 net/ipv6/af_inet6.c:293
SYSC_bind+0x3f2/0x4b0 net/socket.c:1474
SyS_bind+0x54/0x80 net/socket.c:1460
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x43fd49
RSP: 002b:00007ffe99df3d28 EFLAGS: 00000213 ORIG_RAX: 0000000000000031
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fd49
RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000004002c8 R11: 0000000000000213 R12: 0000000000401670
R13: 0000000000401700 R14: 0000000000000000 R15: 0000000000000000
Local variable description: ----address@SYSC_bind
Variable was created at:
SYSC_bind+0x6f/0x4b0 net/socket.c:1461
SyS_bind+0x54/0x80 net/socket.c:1460
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
missed it in "kill struct filename.separate" several years ago.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The Marvell switches under some conditions will pass a frame to the
host with the port being the CPU port. Such frames are invalid, and
should be dropped. Not dropping them can result in a crash when
incrementing the receive statistics for an invalid port.
Reported-by: Chris Healy <cphealy@gmail.com>
Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot produced a nice report [1]
Issue here is that a recvmmsg() managed to leak 8 bytes of kernel memory
to user space, because sin_zero (padding field) was not properly cleared.
[1]
BUG: KMSAN: uninit-value in copy_to_user include/linux/uaccess.h:184 [inline]
BUG: KMSAN: uninit-value in move_addr_to_user+0x32e/0x530 net/socket.c:227
CPU: 1 PID: 3586 Comm: syzkaller481044 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
kmsan_internal_check_memory+0x164/0x1d0 mm/kmsan/kmsan.c:1176
kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199
copy_to_user include/linux/uaccess.h:184 [inline]
move_addr_to_user+0x32e/0x530 net/socket.c:227
___sys_recvmsg+0x4e2/0x810 net/socket.c:2211
__sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313
SYSC_recvmmsg+0x29b/0x3e0 net/socket.c:2394
SyS_recvmmsg+0x76/0xa0 net/socket.c:2378
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x4401c9
RSP: 002b:00007ffc56f73098 EFLAGS: 00000217 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401c9
RDX: 0000000000000001 RSI: 0000000020003ac0 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000020003bc0 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000401af0
R13: 0000000000401b80 R14: 0000000000000000 R15: 0000000000000000
Local variable description: ----addr@___sys_recvmsg
Variable was created at:
___sys_recvmsg+0xd5/0x810 net/socket.c:2172
__sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313
Bytes 8-15 of 16 are uninitialized
==================================================================
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 3586 Comm: syzkaller481044 Tainted: G B 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
panic+0x39d/0x940 kernel/panic.c:183
kmsan_report+0x238/0x240 mm/kmsan/kmsan.c:1083
kmsan_internal_check_memory+0x164/0x1d0 mm/kmsan/kmsan.c:1176
kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199
copy_to_user include/linux/uaccess.h:184 [inline]
move_addr_to_user+0x32e/0x530 net/socket.c:227
___sys_recvmsg+0x4e2/0x810 net/socket.c:2211
__sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313
SYSC_recvmmsg+0x29b/0x3e0 net/socket.c:2394
SyS_recvmmsg+0x76/0xa0 net/socket.c:2378
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported an uninit-value in inet_csk_bind_conflict() [1]
It turns out we never propagated sk->sk_reuseport into timewait socket.
[1]
BUG: KMSAN: uninit-value in inet_csk_bind_conflict+0x5f9/0x990 net/ipv4/inet_connection_sock.c:151
CPU: 1 PID: 3589 Comm: syzkaller008242 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
inet_csk_bind_conflict+0x5f9/0x990 net/ipv4/inet_connection_sock.c:151
inet_csk_get_port+0x1d28/0x1e40 net/ipv4/inet_connection_sock.c:320
inet6_bind+0x121c/0x1820 net/ipv6/af_inet6.c:399
SYSC_bind+0x3f2/0x4b0 net/socket.c:1474
SyS_bind+0x54/0x80 net/socket.c:1460
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x4416e9
RSP: 002b:00007ffce6d15c88 EFLAGS: 00000217 ORIG_RAX: 0000000000000031
RAX: ffffffffffffffda RBX: 0100000000000000 RCX: 00000000004416e9
RDX: 000000000000001c RSI: 0000000020402000 RDI: 0000000000000004
RBP: 0000000000000000 R08: 00000000e6d15e08 R09: 00000000e6d15e08
R10: 0000000000000004 R11: 0000000000000217 R12: 0000000000009478
R13: 00000000006cd448 R14: 0000000000000000 R15: 0000000000000000
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:293 [inline]
kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684
__msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521
tcp_time_wait+0xf17/0xf50 net/ipv4/tcp_minisocks.c:283
tcp_rcv_state_process+0xebe/0x6490 net/ipv4/tcp_input.c:6003
tcp_v6_do_rcv+0x11dd/0x1d90 net/ipv6/tcp_ipv6.c:1331
sk_backlog_rcv include/net/sock.h:908 [inline]
__release_sock+0x2d6/0x680 net/core/sock.c:2271
release_sock+0x97/0x2a0 net/core/sock.c:2786
tcp_close+0x277/0x18f0 net/ipv4/tcp.c:2269
inet_release+0x240/0x2a0 net/ipv4/af_inet.c:427
inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:435
sock_release net/socket.c:595 [inline]
sock_close+0xe0/0x300 net/socket.c:1149
__fput+0x49e/0xa10 fs/file_table.c:209
____fput+0x37/0x40 fs/file_table.c:243
task_work_run+0x243/0x2c0 kernel/task_work.c:113
exit_task_work include/linux/task_work.h:22 [inline]
do_exit+0x10e1/0x38d0 kernel/exit.c:867
do_group_exit+0x1a0/0x360 kernel/exit.c:970
SYSC_exit_group+0x21/0x30 kernel/exit.c:981
SyS_exit_group+0x25/0x30 kernel/exit.c:979
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:293 [inline]
kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684
__msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521
inet_twsk_alloc+0xaef/0xc00 net/ipv4/inet_timewait_sock.c:182
tcp_time_wait+0xd9/0xf50 net/ipv4/tcp_minisocks.c:258
tcp_rcv_state_process+0xebe/0x6490 net/ipv4/tcp_input.c:6003
tcp_v6_do_rcv+0x11dd/0x1d90 net/ipv6/tcp_ipv6.c:1331
sk_backlog_rcv include/net/sock.h:908 [inline]
__release_sock+0x2d6/0x680 net/core/sock.c:2271
release_sock+0x97/0x2a0 net/core/sock.c:2786
tcp_close+0x277/0x18f0 net/ipv4/tcp.c:2269
inet_release+0x240/0x2a0 net/ipv4/af_inet.c:427
inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:435
sock_release net/socket.c:595 [inline]
sock_close+0xe0/0x300 net/socket.c:1149
__fput+0x49e/0xa10 fs/file_table.c:209
____fput+0x37/0x40 fs/file_table.c:243
task_work_run+0x243/0x2c0 kernel/task_work.c:113
exit_task_work include/linux/task_work.h:22 [inline]
do_exit+0x10e1/0x38d0 kernel/exit.c:867
do_group_exit+0x1a0/0x360 kernel/exit.c:970
SYSC_exit_group+0x21/0x30 kernel/exit.c:981
SyS_exit_group+0x25/0x30 kernel/exit.c:979
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmem_cache_alloc+0xaab/0xb90 mm/slub.c:2756
inet_twsk_alloc+0x13b/0xc00 net/ipv4/inet_timewait_sock.c:163
tcp_time_wait+0xd9/0xf50 net/ipv4/tcp_minisocks.c:258
tcp_rcv_state_process+0xebe/0x6490 net/ipv4/tcp_input.c:6003
tcp_v6_do_rcv+0x11dd/0x1d90 net/ipv6/tcp_ipv6.c:1331
sk_backlog_rcv include/net/sock.h:908 [inline]
__release_sock+0x2d6/0x680 net/core/sock.c:2271
release_sock+0x97/0x2a0 net/core/sock.c:2786
tcp_close+0x277/0x18f0 net/ipv4/tcp.c:2269
inet_release+0x240/0x2a0 net/ipv4/af_inet.c:427
inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:435
sock_release net/socket.c:595 [inline]
sock_close+0xe0/0x300 net/socket.c:1149
__fput+0x49e/0xa10 fs/file_table.c:209
____fput+0x37/0x40 fs/file_table.c:243
task_work_run+0x243/0x2c0 kernel/task_work.c:113
exit_task_work include/linux/task_work.h:22 [inline]
do_exit+0x10e1/0x38d0 kernel/exit.c:867
do_group_exit+0x1a0/0x360 kernel/exit.c:970
SYSC_exit_group+0x21/0x30 kernel/exit.c:981
SyS_exit_group+0x25/0x30 kernel/exit.c:979
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Fixes: da5e36308d9f ("soreuseport: TCP/IPv4 implementation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot complained that res.type could be used while not initialized.
Using RTN_UNSPEC as initial value seems better than using garbage.
BUG: KMSAN: uninit-value in __mkroute_output net/ipv4/route.c:2200 [inline]
BUG: KMSAN: uninit-value in ip_route_output_key_hash_rcu+0x31f0/0x3940 net/ipv4/route.c:2493
CPU: 1 PID: 12207 Comm: syz-executor0 Not tainted 4.16.0+ #81
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
__mkroute_output net/ipv4/route.c:2200 [inline]
ip_route_output_key_hash_rcu+0x31f0/0x3940 net/ipv4/route.c:2493
ip_route_output_key_hash net/ipv4/route.c:2322 [inline]
__ip_route_output_key include/net/route.h:126 [inline]
ip_route_output_flow+0x1eb/0x3c0 net/ipv4/route.c:2577
raw_sendmsg+0x1861/0x3ed0 net/ipv4/raw.c:653
inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
SYSC_sendto+0x6c3/0x7e0 net/socket.c:1747
SyS_sendto+0x8a/0xb0 net/socket.c:1715
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x455259
RSP: 002b:00007fdc0625dc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007fdc0625e6d4 RCX: 0000000000455259
RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000013
RBP: 000000000072bea0 R08: 0000000020000080 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000004f7 R14: 00000000006fa7c8 R15: 0000000000000000
Local variable description: ----res.i.i@ip_route_output_flow
Variable was created at:
ip_route_output_flow+0x75/0x3c0 net/ipv4/route.c:2576
raw_sendmsg+0x1861/0x3ed0 net/ipv4/raw.c:653
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported an uninit-value read of skb->mark in iptable_mangle_hook()
Thanks to the nice report, I tracked the problem to dccp not caring
of ireq->ir_mark for passive sessions.
BUG: KMSAN: uninit-value in ipt_mangle_out net/ipv4/netfilter/iptable_mangle.c:66 [inline]
BUG: KMSAN: uninit-value in iptable_mangle_hook+0x5e5/0x720 net/ipv4/netfilter/iptable_mangle.c:84
CPU: 0 PID: 5300 Comm: syz-executor3 Not tainted 4.16.0+ #81
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
ipt_mangle_out net/ipv4/netfilter/iptable_mangle.c:66 [inline]
iptable_mangle_hook+0x5e5/0x720 net/ipv4/netfilter/iptable_mangle.c:84
nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline]
nf_hook_slow+0x158/0x3d0 net/netfilter/core.c:483
nf_hook include/linux/netfilter.h:243 [inline]
__ip_local_out net/ipv4/ip_output.c:113 [inline]
ip_local_out net/ipv4/ip_output.c:122 [inline]
ip_queue_xmit+0x1d21/0x21c0 net/ipv4/ip_output.c:504
dccp_transmit_skb+0x15eb/0x1900 net/dccp/output.c:142
dccp_xmit_packet+0x814/0x9e0 net/dccp/output.c:281
dccp_write_xmit+0x20f/0x480 net/dccp/output.c:363
dccp_sendmsg+0x12ca/0x12d0 net/dccp/proto.c:818
inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
__sys_sendmsg net/socket.c:2080 [inline]
SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
SyS_sendmsg+0x54/0x80 net/socket.c:2087
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x455259
RSP: 002b:00007f1a4473dc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f1a4473e6d4 RCX: 0000000000455259
RDX: 0000000000000000 RSI: 0000000020b76fc8 RDI: 0000000000000015
RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000004f0 R14: 00000000006fa720 R15: 0000000000000000
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:293 [inline]
kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684
__msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521
ip_queue_xmit+0x1e35/0x21c0 net/ipv4/ip_output.c:502
dccp_transmit_skb+0x15eb/0x1900 net/dccp/output.c:142
dccp_xmit_packet+0x814/0x9e0 net/dccp/output.c:281
dccp_write_xmit+0x20f/0x480 net/dccp/output.c:363
dccp_sendmsg+0x12ca/0x12d0 net/dccp/proto.c:818
inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
__sys_sendmsg net/socket.c:2080 [inline]
SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
SyS_sendmsg+0x54/0x80 net/socket.c:2087
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:293 [inline]
kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684
__msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521
inet_csk_clone_lock+0x503/0x580 net/ipv4/inet_connection_sock.c:797
dccp_create_openreq_child+0x7f/0x890 net/dccp/minisocks.c:92
dccp_v4_request_recv_sock+0x22c/0xe90 net/dccp/ipv4.c:408
dccp_v6_request_recv_sock+0x290/0x2000 net/dccp/ipv6.c:414
dccp_check_req+0x7b9/0x8f0 net/dccp/minisocks.c:197
dccp_v4_rcv+0x12e4/0x2630 net/dccp/ipv4.c:840
ip_local_deliver_finish+0x6ed/0xd40 net/ipv4/ip_input.c:216
NF_HOOK include/linux/netfilter.h:288 [inline]
ip_local_deliver+0x43c/0x4e0 net/ipv4/ip_input.c:257
dst_input include/net/dst.h:449 [inline]
ip_rcv_finish+0x1253/0x16d0 net/ipv4/ip_input.c:397
NF_HOOK include/linux/netfilter.h:288 [inline]
ip_rcv+0x119d/0x16f0 net/ipv4/ip_input.c:493
__netif_receive_skb_core+0x47cf/0x4a80 net/core/dev.c:4562
__netif_receive_skb net/core/dev.c:4627 [inline]
process_backlog+0x62d/0xe20 net/core/dev.c:5307
napi_poll net/core/dev.c:5705 [inline]
net_rx_action+0x7c1/0x1a70 net/core/dev.c:5771
__do_softirq+0x56d/0x93d kernel/softirq.c:285
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmem_cache_alloc+0xaab/0xb90 mm/slub.c:2756
reqsk_alloc include/net/request_sock.h:88 [inline]
inet_reqsk_alloc+0xc4/0x7f0 net/ipv4/tcp_input.c:6145
dccp_v4_conn_request+0x5cc/0x1770 net/dccp/ipv4.c:600
dccp_v6_conn_request+0x299/0x1880 net/dccp/ipv6.c:317
dccp_rcv_state_process+0x2ea/0x2410 net/dccp/input.c:612
dccp_v4_do_rcv+0x229/0x340 net/dccp/ipv4.c:682
dccp_v6_do_rcv+0x16d/0x1220 net/dccp/ipv6.c:578
sk_backlog_rcv include/net/sock.h:908 [inline]
__sk_receive_skb+0x60e/0xf20 net/core/sock.c:513
dccp_v4_rcv+0x24d4/0x2630 net/dccp/ipv4.c:874
ip_local_deliver_finish+0x6ed/0xd40 net/ipv4/ip_input.c:216
NF_HOOK include/linux/netfilter.h:288 [inline]
ip_local_deliver+0x43c/0x4e0 net/ipv4/ip_input.c:257
dst_input include/net/dst.h:449 [inline]
ip_rcv_finish+0x1253/0x16d0 net/ipv4/ip_input.c:397
NF_HOOK include/linux/netfilter.h:288 [inline]
ip_rcv+0x119d/0x16f0 net/ipv4/ip_input.c:493
__netif_receive_skb_core+0x47cf/0x4a80 net/core/dev.c:4562
__netif_receive_skb net/core/dev.c:4627 [inline]
process_backlog+0x62d/0xe20 net/core/dev.c:5307
napi_poll net/core/dev.c:5705 [inline]
net_rx_action+0x7c1/0x1a70 net/core/dev.c:5771
__do_softirq+0x56d/0x93d kernel/softirq.c:285
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot complained :
BUG: KMSAN: uninit-value in memcmp+0x119/0x180 lib/string.c:861
CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
memcmp+0x119/0x180 lib/string.c:861
__hw_addr_add_ex net/core/dev_addr_lists.c:60 [inline]
__dev_mc_add+0x1c2/0x8e0 net/core/dev_addr_lists.c:670
dev_mc_add+0x6d/0x80 net/core/dev_addr_lists.c:687
igmp6_group_added+0x2db/0xa00 net/ipv6/mcast.c:662
ipv6_dev_mc_inc+0xe9e/0x1130 net/ipv6/mcast.c:914
addrconf_join_solict net/ipv6/addrconf.c:2078 [inline]
addrconf_dad_begin net/ipv6/addrconf.c:3828 [inline]
addrconf_dad_work+0x427/0x2150 net/ipv6/addrconf.c:3954
process_one_work+0x12c6/0x1f60 kernel/workqueue.c:2113
worker_thread+0x113c/0x24f0 kernel/workqueue.c:2247
kthread+0x539/0x720 kernel/kthread.c:239
Fixes: f001fde5eadd ("net: introduce a list of device addresses dev_addr_list (v6)")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported __skb_try_recv_from_queue() was using skb->peeked
while it was potentially unitialized.
We need to clear it in __skb_clone()
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported :
BUG: KMSAN: uninit-value in rtnh_ok include/net/nexthop.h:11 [inline]
BUG: KMSAN: uninit-value in fib_count_nexthops net/ipv4/fib_semantics.c:469 [inline]
BUG: KMSAN: uninit-value in fib_create_info+0x554/0x8d20 net/ipv4/fib_semantics.c:1091
@remaining is an integer, coming from user space.
If it is negative we want rtnh_ok() to return false.
Fixes: 4e902c57417c ("[IPv4]: FIB configuration using struct fib_config")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported :
BUG: KMSAN: uninit-value in ffs arch/x86/include/asm/bitops.h:432 [inline]
BUG: KMSAN: uninit-value in netlink_sendmsg+0xb26/0x1310 net/netlink/af_netlink.c:1851
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported :
BUG: KMSAN: uninit-value in alg_bind+0xe3/0xd90 crypto/af_alg.c:162
We need to check addr_len before dereferencing sa (or uaddr)
Fixes: bb30b8848c85 ("crypto: af_alg - whitelist mask and type")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Stephan Mueller <smueller@chronox.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add macros around the initcall_debug tracepoint code to have the code to
default back to the old method if CONFIG_TRACEPOINTS is not enabled.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
memory-barriers.txt has been updated with the following requirement.
"When using writel(), a prior wmb() is not needed to guarantee that the
cache coherent memory writes have completed before writing to the MMIO
region."
Current writeX() and iowriteX() implementations on alpha are not
satisfying this requirement as the barrier is after the register write.
Move mb() in writeX() and iowriteX() functions to guarantee that HW
observes memory changes before performing register operations.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
Implement the CPU vulnerabilty show functions for meltdown, spectre_v1
and spectre_v2 on Alpha.
Tests on XP1000 (EV67/667MHz) and ES45 (EV68CB/1.25GHz) show them
to be vulnerable to Meltdown and Spectre V1. In the case of
Meltdown I saw a 1 to 2% success rate in reading bytes on the
XP1000 and 50 to 60% success rate on the ES45. (This compares to
99.97% success reported for Intel CPUs.) Report EV6 and later
CPUs as vulnerable.
Tests on PWS600au (EV56/600MHz) for Spectre V1 attack were
unsuccessful (though I did not try particularly hard) so mark EV4
through to EV56 as not vulnerable.
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
The RTC core is always calling rtc_valid_tm after the read_time callback.
It is not necessary to call it just before returning from the callback.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
The .set_mmss and .setmmss64 ops are only called when the RTC is not
providing an implementation for the .set_time callback.
On alpha, .set_time is provided so .set_mmss64 is never called. Remove the
unused code.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
Joe Perches noted that we have a few source files that for some
inexplicable reason (read: I'm too lazy to even go look at the history)
are marked executable:
drivers/gpu/drm/amd/amdgpu/vce_v4_0.c
drivers/net/ethernet/cadence/macb_ptp.c
A simple git command line to show executable C/asm/header files is this:
git ls-files -s '*.[chsS]' | grep '^100755'
and then you can fix them up with scripting by just feeding that output
into:
| cut -f2 | xargs chmod -x
and commit it.
Which is exactly what this commit does.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When we delete a u32 key via u32_delete_key(), we forget to
call idr_remove() to remove its handle from IDR.
Fixes: e7614370d6f0 ("net_sched: use idr to allocate u32 filter handles")
Reported-by: Marcin Kabiesz <admin@hostcenter.eu>
Tested-by: Marcin Kabiesz <admin@hostcenter.eu>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After attempting to quickly retrieve known errors the kernel proceeds to
kick off a long running ARS. Add a module option to disable this
behavior at initialization time, or at new region discovery time.
Otherwise, ARS can be started manually regardless of the state of this
setting.
Co-developed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
ARS is an operation that can take 10s to 100s of seconds to find media
errors that should rarely be present. If the platform crashes due to
media errors in persistent memory, the expectation is that the BIOS will
report those known errors in a 'short' ARS request.
A 'short' ARS request asks platform firmware to return an ARS payload
with all known errors, but without issuing a 'long' scrub. At driver
init a short request is issued to all PMEM ranges before registering
regions. Then, in the background, a long ARS is scheduled for each
region.
The ARS implementation is simplified to centralize ARS completion work
in the ars_complete() helper. The timeout is removed since there is no
facility to cancel ARS, and this otherwise arranges for system init to
never be blocked waiting for a 'long' ARS. The ars_state flags are used
to coordinate ARS requests from driver init, ARS requests from
userspace, and ARS requests in response to media error notifications.
Given that there is no notification of ARS completion the implementation
still needs to poll. It backs off exponentially to a maximum poll period
of 30 minutes.
Suggested-by: Toshi Kani <toshi.kani@hpe.com>
Co-developed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
acpi_nfit_query_poison() is awkward in that it requires an nfit_spa
argument in order to determine what max_ars value to use. Instead probe
for the minimum max_ars across all scrub-capable ranges in the system
and drop the nfit_spa argument.
This enables a larger rework / simplification of the ARS state machine
whereby the status can be retrieved once and then iterated over all
address ranges to reap completions.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Scan the devicetree for an nvdimm-bus compatible and create
a platform device for them.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add device-tree binding documentation for the nvdimm region driver.
Cc: devicetree@vger.kernel.org
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
This patch adds peliminary device-tree bindings for persistent memory
regions. The driver registers a libnvdimm bus for each pmem-region
node and each address range under the node is converted to a region
within that bus.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
We want to be able to cross reference the region and bus devices
with the device tree node that they were spawned from. libNVDIMM
handles creating the actual devices for these internally, so we
need to pass in a pointer to the relevant node in the descriptor.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The message about constraining number of online cpus to be less than or
equal to ND_MAX_LANES (256) is only useful for block-aperture
configurations and BTT. Make it debug since it is only relevant when
debugging performance.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The commit 02a5d6925cd3 ("ALSA: pcm: Avoid potential races between OSS
ioctls and read/write") split the PCM preparation code to a locked
version, and it added a sanity check of runtime->oss.prepare flag
along with the change. This leaded to an endless loop when the stream
gets XRUN: namely, snd_pcm_oss_write3() and co call
snd_pcm_oss_prepare() without setting runtime->oss.prepare flag and
the loop continues until the PCM state reaches to another one.
As the function is supposed to execute the preparation
unconditionally, drop the invalid state check there.
The bug was triggered by syzkaller.
Fixes: 02a5d6925cd3 ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write")
Reported-by: syzbot+150189c103427d31a053@syzkaller.appspotmail.com
Reported-by: syzbot+7e3f31a52646f939c052@syzkaller.appspotmail.com
Reported-by: syzbot+4f2016cf5185da7759dc@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The UAC3 clock parser codes lack of the sanity checks for malformed
descriptors like UAC2 parser does. Without it, the driver may lead to
a potential crash.
Fixes: 9a2fe9b801f5 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Tested-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The sanity checks introduced for malformed descriptors loosely check
the given descriptor size, although the size greater than the defined
description is invalid. It was due to a concern of any funky firmware
in the actual products. But this doesn't look hitting, and any sane
products must have the defined descriptors.
So in this patch, we make the validators more strict, allowing only
with the defined descriptor sizes. The value in clock selector
validator is corrected from 5 to 7 to count the two unlisted fields
after baCSourceID[].
Suggested-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There are lots of open-coded functions to find a clock source,
selector and multiplier. Now there are both v2 and v3, so six
variants.
This patch refactors the code to use a common helper for the main
loop, and define each validator function for each target.
There is no functional change.
Fixes: 9a2fe9b801f5 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The following NULL dereference results from incorrectly assuming that
ndd is valid in this print:
struct nvdimm_drvdata *ndd = to_ndd(&nd_region->mapping[i]);
/*
* Give up if we don't find an instance of a uuid at each
* position (from 0 to nd_region->ndr_mappings - 1), or if we
* find a dimm with two instances of the same uuid.
*/
dev_err(&nd_region->dev, "%s missing label for %pUb\n",
dev_name(ndd->dev), nd_label->uuid);
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
IP: nd_region_register_namespaces+0xd67/0x13c0 [libnvdimm]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 43 PID: 673 Comm: kworker/u609:10 Not tainted 4.16.0-rc4+ #1
[..]
RIP: 0010:nd_region_register_namespaces+0xd67/0x13c0 [libnvdimm]
[..]
Call Trace:
? devres_add+0x2f/0x40
? devm_kmalloc+0x52/0x60
? nd_region_activate+0x9c/0x320 [libnvdimm]
nd_region_probe+0x94/0x260 [libnvdimm]
? kernfs_add_one+0xe4/0x130
nvdimm_bus_probe+0x63/0x100 [libnvdimm]
Switch to using the nvdimm device directly.
Fixes: 0e3b0d123c8f ("libnvdimm, namespace: allow multiple pmem...")
Cc: <stable@vger.kernel.org>
Reported-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
At initialization time the 'dimm' driver caches a copy of the memory
device's label area and reserves address space for each of the
namespaces defined.
However, as can be seen below, the reservation occurs even when the
index blocks are invalid:
nvdimm nmem0: nvdimm_init_config_data: len: 131072 rc: 0
nvdimm nmem0: config data size: 131072
nvdimm nmem0: __nd_label_validate: nsindex0 labelsize 1 invalid
nvdimm nmem0: __nd_label_validate: nsindex1 labelsize 1 invalid
nvdimm nmem0: : pmem-6025e505: 0x1000000000 @ 0xf50000000 reserve <-- bad
Gate dpa reservation on the presence of valid index blocks.
Cc: <stable@vger.kernel.org>
Fixes: 4a826c83db4e ("libnvdimm: namespace indices: read and validate")
Reported-by: Krzysztof Rusocki <krzysztof.rusocki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
MAINTAINERS is out of date for leaking_addresses.pl. There is now a tree on
kernel.org for development of this script. We have a second maintainer now,
thanks Tycho. Development of this scripts was started on kernel-hardening
mailing list so let's keep it there.
Update maintainer details; Add mailing list, kernel.org hosted tree, and second
maintainer.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
|
Linus Torvalds
Dan Williams
Takashi Iwai
haibinzhang(张海斌)
Vadim Lomovtsev
Eric Dumazet
Esben Haabendal
Jiri Pirko
Nathan Fontenot
Thomas Falcon
Cong Wang
Al Viro
Andrew Lunn
Steven Rostedt (VMware)
Sinan Kaya
Michael Cree
Alexandre Belloni
Oliver O'Halloran
Tobin C. Harding