aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-04-16KVM: nVMX: Rename and split top-level consistency checks to match SDMSean Christopherson1-14/+25
Rename the top-level consistency check functions to (loosely) align with the SDM. Historically, KVM has used the terms "prereq" and "postreq" to differentiate between consistency checks that lead to VM-Fail and those that lead to VM-Exit. The terms are vague and potentially misleading, e.g. "postreq" might be interpreted as occurring after VM-Entry. Note, while the SDM lumps controls and host state into a single section, "Checks on VMX Controls and Host-State Area", split them into separate top-level functions as the two categories of checks result in different VM instruction errors. This split will allow for additional cleanup. Note #2, "vmentry" is intentionally dropped from the new function names to avoid confusion with nested_check_vm_entry_controls(), and to keep the length of the functions names somewhat manageable. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16KVM: nVMX: Move guest non-reg state checks to VM-Exit pathSean Christopherson1-15/+15
Per Intel's SDM, volume 3, section Checking and Loading Guest State: Because the checking and the loading occur concurrently, a failure may be discovered only after some state has been loaded. For this reason, the logical processor responds to such failures by loading state from the host-state area, as it would for a VM exit. In other words, a failed non-register state consistency check results in a VM-Exit, not VM-Fail. Moving the non-reg state checks also paves the way for renaming nested_vmx_check_vmentry_postreqs() to align with the SDM, i.e. nested_vmx_check_vmentry_guest_state(). Fixes: 26539bd0e446a ("KVM: nVMX: check vmcs12 for valid activity state") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16kvm: nVMX: Check "load IA32_PAT" VM-entry control on vmentryKrish Sadhukhan1-0/+4
According to section "Checking and Loading Guest State" in Intel SDM vol 3C, the following check is performed on vmentry: If the "load IA32_PAT" VM-entry control is 1, the value of the field for the IA32_PAT MSR must be one that could be written by WRMSR without fault at CPL 0. Specifically, each of the 8 bytes in the field must have one of the values 0 (UC), 1 (WC), 4 (WT), 5 (WP), 6 (WB), or 7 (UC-). Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16kvm: nVMX: Check "load IA32_PAT" VM-exit control on vmentryKrish Sadhukhan1-0/+4
According to section "Checks on Host Control Registers and MSRs" in Intel SDM vol 3C, the following check is performed on vmentry: If the "load IA32_PAT" VM-exit control is 1, the value of the field for the IA32_PAT MSR must be one that could be written by WRMSR without fault at CPL 0. Specifically, each of the 8 bytes in the field must have one of the values 0 (UC), 1 (WC), 4 (WT), 5 (WP), 6 (WB), or 7 (UC-). Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16KVM: x86: optimize check for valid PAT valuePaolo Bonzini3-10/+12
This check will soon be done on every nested vmentry and vmexit, "parallelize" it using bitwise operations. Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16KVM: x86: clear VM_EXIT_SAVE_IA32_PATPaolo Bonzini1-1/+0
This is not needed, PAT writes always take an MSR vmexit. Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16KVM: vmx: print more APICv fields in dump_vmcsPaolo Bonzini1-2/+10
The SVI, RVI, virtual-APIC page address and APIC-access page address fields were left out of dump_vmcs. Add them. KERN_CONT technically isn't SMP safe, but it's okay to use it here since the whole of dump_vmcs() is a single huge multi-line piece of output that isn't SMP-safe. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16KVM: x86: avoid misreporting level-triggered irqs as edge-triggered in tracingVitaly Kuznetsov1-2/+2
In __apic_accept_irq() interface trig_mode is int and actually on some code paths it is set above u8: kvm_apic_set_irq() extracts it from 'struct kvm_lapic_irq' where trig_mode is u16. This is done on purpose as e.g. kvm_set_msi_irq() sets it to (1 << 15) & e->msi.data kvm_apic_local_deliver sets it to reg & (1 << 15). Fix the immediate issue by making 'tm' into u16. We may also want to adjust __apic_accept_irq() interface and use proper sizes for vector, level, trig_mode but this is not urgent. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16KVM: fix spectrev1 gadgetsPaolo Bonzini4-9/+16
These were found with smatch, and then generalized when applicable. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16KVM: x86: fix warning Using plain integer as NULL pointerHariprasad Kelam1-1/+1
Changed passing argument as "0 to NULL" which resolves below sparse warning arch/x86/kvm/x86.c:3096:61: warning: Using plain integer as NULL pointer Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16selftests: kvm: add a selftest for SMMVitaly Kuznetsov4-6/+191
Add a simple test for SMM, based on VMX. The test implements its own sync between the guest and the host as using our ucall library seems to be too cumbersome: SMI handler is happening in real-address mode. This patch also fixes KVM_SET_NESTED_STATE to happen after KVM_SET_VCPU_EVENTS, in fact it places it last. This is because KVM needs to know whether the processor is in SMM or not. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16selftests: kvm: fix for compilers that do not support -no-piePaolo Bonzini1-1/+7
-no-pie was added to GCC at the same time as their configuration option --enable-default-pie. Compilers that were built before do not have -no-pie, but they also do not need it. Detect the option at build time. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16selftests: kvm/evmcs_test: complete I/O before migrating guest statePaolo Bonzini4-16/+17
Starting state migration after an IO exit without first completing IO may result in test failures. We already have two tests that need this (this patch in fact fixes evmcs_test, similar to what was fixed for state_test in commit 0f73bbc851ed, "KVM: selftests: complete IO before migrating guest state", 2019-03-13) and a third is coming. So, move the code to vcpu_save_state, and while at it do not access register state until after I/O is complete. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16KVM: x86: Always use 32-bit SMRAM save state for 32-bit kernelsSean Christopherson2-4/+16
Invoking the 64-bit variation on a 32-bit kenrel will crash the guest, trigger a WARN, and/or lead to a buffer overrun in the host, e.g. rsm_load_state_64() writes r8-r15 unconditionally, but enum kvm_reg and thus x86_emulate_ctxt._regs only define r8-r15 for CONFIG_X86_64. KVM allows userspace to report long mode support via CPUID, even though the guest is all but guaranteed to crash if it actually tries to enable long mode. But, a pure 32-bit guest that is ignorant of long mode will happily plod along. SMM complicates things as 64-bit CPUs use a different SMRAM save state area. KVM handles this correctly for 64-bit kernels, e.g. uses the legacy save state map if userspace has hid long mode from the guest, but doesn't fare well when userspace reports long mode support on a 32-bit host kernel (32-bit KVM doesn't support 64-bit guests). Since the alternative is to crash the guest, e.g. by not loading state or explicitly requesting shutdown, unconditionally use the legacy SMRAM save state map for 32-bit KVM. If a guest has managed to get far enough to handle SMIs when running under a weird/buggy userspace hypervisor, then don't deliberately crash the guest since there are no downsides (from KVM's perspective) to allow it to continue running. Fixes: 660a5d517aaab ("KVM: x86: save/load state on SMM switch") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16KVM: x86: Don't clear EFER during SMM transitions for 32-bit vCPUSean Christopherson1-10/+11
Neither AMD nor Intel CPUs have an EFER field in the legacy SMRAM save state area, i.e. don't save/restore EFER across SMM transitions. KVM somewhat models this, e.g. doesn't clear EFER on entry to SMM if the guest doesn't support long mode. But during RSM, KVM unconditionally clears EFER so that it can get back to pure 32-bit mode in order to start loading CRs with their actual non-SMM values. Clear EFER only when it will be written when loading the non-SMM state so as to preserve bits that can theoretically be set on 32-bit vCPUs, e.g. KVM always emulates EFER_SCE. And because CR4.PAE is cleared only to play nice with EFER, wrap that code in the long mode check as well. Note, this may result in a compiler warning about cr4 being consumed uninitialized. Re-read CR4 even though it's technically unnecessary, as doing so allows for more readable code and RSM emulation is not a performance critical path. Fixes: 660a5d517aaab ("KVM: x86: save/load state on SMM switch") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16KVM: x86: clear SMM flags before loading state while leaving SMMSean Christopherson3-16/+10
RSM emulation is currently broken on VMX when the interrupted guest has CR4.VMXE=1. Stop dancing around the issue of HF_SMM_MASK being set when loading SMSTATE into architectural state, e.g. by toggling it for problematic flows, and simply clear HF_SMM_MASK prior to loading architectural state (from SMRAM save state area). Reported-by: Jon Doron <arilou@gmail.com> Cc: Jim Mattson <jmattson@google.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Fixes: 5bea5123cbf0 ("KVM: VMX: check nested state and CR4.VMXE against SMM") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16KVM: x86: Open code kvm_set_hflagsSean Christopherson3-18/+19
Prepare for clearing HF_SMM_MASK prior to loading state from the SMRAM save state map, i.e. kvm_smm_changed() needs to be called after state has been loaded and so cannot be done automatically when setting hflags from RSM. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16KVM: x86: Load SMRAM in a single shot when leaving SMMSean Christopherson6-92/+92
RSM emulation is currently broken on VMX when the interrupted guest has CR4.VMXE=1. Rather than dance around the issue of HF_SMM_MASK being set when loading SMSTATE into architectural state, ideally RSM emulation itself would be reworked to clear HF_SMM_MASK prior to loading non-SMM architectural state. Ostensibly, the only motivation for having HF_SMM_MASK set throughout the loading of state from the SMRAM save state area is so that the memory accesses from GET_SMSTATE() are tagged with role.smm. Load all of the SMRAM save state area from guest memory at the beginning of RSM emulation, and load state from the buffer instead of reading guest memory one-by-one. This paves the way for clearing HF_SMM_MASK prior to loading state, and also aligns RSM with the enter_smm() behavior, which fills a buffer and writes SMRAM save state in a single go. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16KVM: nVMX: Expose RDPMC-exiting only when guest supports PMULiran Alon1-0/+25
Issue was discovered when running kvm-unit-tests on KVM running as L1 on top of Hyper-V. When vmx_instruction_intercept unit-test attempts to run RDPMC to test RDPMC-exiting, it is intercepted by L1 KVM which it's EXIT_REASON_RDPMC handler raise #GP because vCPU exposed by Hyper-V doesn't support PMU. Instead of unit-test expectation to be reflected with EXIT_REASON_RDPMC. The reason vmx_instruction_intercept unit-test attempts to run RDPMC even though Hyper-V doesn't support PMU is because L1 expose to L2 support for RDPMC-exiting. Which is reasonable to assume that is supported only in case CPU supports PMU to being with. Above issue can easily be simulated by modifying vmx_instruction_intercept config in x86/unittests.cfg to run QEMU with "-cpu host,+vmx,-pmu" and run unit-test. To handle issue, change KVM to expose RDPMC-exiting only when guest supports PMU. Reported-by: Saar Amar <saaramar@microsoft.com> Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16KVM: x86: Raise #GP when guest vCPU do not support PMULiran Alon1-0/+4
Before this change, reading a VMware pseduo PMC will succeed even when PMU is not supported by guest. This can easily be seen by running kvm-unit-test vmware_backdoors with "-cpu host,-pmu" option. Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16x86/kvm: move kvm_load/put_guest_xcr0 into atomic contextWANG Chao4-6/+12
guest xcr0 could leak into host when MCE happens in guest mode. Because do_machine_check() could schedule out at a few places. For example: kvm_load_guest_xcr0 ... kvm_x86_ops->run(vcpu) { vmx_vcpu_run vmx_complete_atomic_exit kvm_machine_check do_machine_check do_memory_failure memory_failure lock_page In this case, host_xcr0 is 0x2ff, guest vcpu xcr0 is 0xff. After schedule out, host cpu has guest xcr0 loaded (0xff). In __switch_to { switch_fpu_finish copy_kernel_to_fpregs XRSTORS If any bit i in XSTATE_BV[i] == 1 and xcr0[i] == 0, XRSTORS will generate #GP (In this case, bit 9). Then ex_handler_fprestore kicks in and tries to reinitialize fpu by restoring init fpu state. Same story as last #GP, except we get DOUBLE FAULT this time. Cc: stable@vger.kernel.org Signed-off-by: WANG Chao <chao.wang@ucloud.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16KVM: x86: svm: make sure NMI is injected after nmi_singlestepVitaly Kuznetsov1-0/+3
I noticed that apic test from kvm-unit-tests always hangs on my EPYC 7401P, the hanging test nmi-after-sti is trying to deliver 30000 NMIs and tracing shows that we're sometimes able to deliver a few but never all. When we're trying to inject an NMI we may fail to do so immediately for various reasons, however, we still need to inject it so enable_nmi_window() arms nmi_singlestep mode. #DB occurs as expected, but we're not checking for pending NMIs before entering the guest and unless there's a different event to process, the NMI will never get delivered. Make KVM_REQ_EVENT request on the vCPU from db_interception() to make sure pending NMIs are checked and possibly injected. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16svm/avic: Fix invalidate logical APIC id entrySuthikulpanit, Suravee1-1/+2
Only clear the valid bit when invalidate logical APIC id entry. The current logic clear the valid bit, but also set the rest of the bits (including reserved bits) to 1. Fixes: 98d90582be2e ('svm: Fix AVIC DFR and LDR handling') Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16Revert "svm: Fix AVIC incomplete IPI emulation"Suthikulpanit, Suravee1-4/+15
This reverts commit bb218fbcfaaa3b115d4cd7a43c0ca164f3a96e57. As Oren Twaig pointed out the old discussion: https://patchwork.kernel.org/patch/8292231/ that the change coud potentially cause an extra IPI to be sent to the destination vcpu because the AVIC hardware already set the IRR bit before the incomplete IPI #VMEXIT with id=1 (target vcpu is not running). Since writting to ICR and ICR2 will also set the IRR. If something triggers the destination vcpu to get scheduled before the emulation finishes, then this could result in an additional IPI. Also, the issue mentioned in the commit bb218fbcfaaa was misdiagnosed. Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reported-by: Oren Twaig <oren@scalemp.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16kvm: mmu: Fix overflow on kvm mmu page limit calculationBen Gardon4-16/+15
KVM bases its memory usage limits on the total number of guest pages across all memslots. However, those limits, and the calculations to produce them, use 32 bit unsigned integers. This can result in overflow if a VM has more guest pages that can be represented by a u32. As a result of this overflow, KVM can use a low limit on the number of MMU pages it will allocate. This makes KVM unable to map all of guest memory at once, prompting spurious faults. Tested: Ran all kvm-unit-tests on an Intel Haswell machine. This patch introduced no new failures. Signed-off-by: Ben Gardon <bgardon@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16KVM: nVMX: always use early vmcs check when EPT is disabledPaolo Bonzini2-2/+21
The remaining failures of vmx.flat when EPT is disabled are caused by incorrectly reflecting VMfails to the L1 hypervisor. What happens is that nested_vmx_restore_host_state corrupts the guest CR3, reloading it with the host's shadow CR3 instead, because it blindly loads GUEST_CR3 from the vmcs01. For simplicity let's just always use hardware VMCS checks when EPT is disabled. This way, nested_vmx_restore_host_state is not reached at all (or at least shouldn't be reached). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16KVM: nVMX: allow tests to use bad virtual-APIC page addressPaolo Bonzini3-10/+19
As mentioned in the comment, there are some special cases where we can simply clear the TPR shadow bit from the CPU-based execution controls in the vmcs02. Handle them so that we can remove some XFAILs from vmx.flat. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-15KVM: x86/mmu: Fix an inverted list_empty() check when zapping sptesSean Christopherson1-1/+1
A recently introduced helper for handling zap vs. remote flush incorrectly bails early, effectively leaking defunct shadow pages. Manifests as a slab BUG when exiting KVM due to the shadow pages being alive when their associated cache is destroyed. ========================================================================== BUG kvm_mmu_page_header: Objects remaining in kvm_mmu_page_header on ... -------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0x00000000fc436387 objects=26 used=23 fp=0x00000000d023caee ... CPU: 6 PID: 4315 Comm: rmmod Tainted: G B 5.1.0-rc2+ #19 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack+0x46/0x5b slab_err+0xad/0xd0 ? on_each_cpu_mask+0x3c/0x50 ? ksm_migrate_page+0x60/0x60 ? on_each_cpu_cond_mask+0x7c/0xa0 ? __kmalloc+0x1ca/0x1e0 __kmem_cache_shutdown+0x13a/0x310 shutdown_cache+0xf/0x130 kmem_cache_destroy+0x1d5/0x200 kvm_mmu_module_exit+0xa/0x30 [kvm] kvm_arch_exit+0x45/0x60 [kvm] kvm_exit+0x6f/0x80 [kvm] vmx_exit+0x1a/0x50 [kvm_intel] __x64_sys_delete_module+0x153/0x1f0 ? exit_to_usermode_loop+0x88/0xc0 do_syscall_64+0x4f/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: a21136345cb6f ("KVM: x86/mmu: Split remote_flush+zap case out of kvm_mmu_flush_or_zap()") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-09Bluetooth: btusb: request wake pin with NOAUTOENBrian Norris1-1/+1
Badly-designed systems might have (for example) active-high wake pins that default to high (e.g., because of external pull ups) until they have an active firmware which starts driving it low. This can cause an interrupt storm in the time between request_irq() and disable_irq(). We don't support shared interrupts here, so let's just pre-configure the interrupt to avoid auto-enabling it. Fixes: fd913ef7ce61 ("Bluetooth: btusb: Add out-of-band wakeup support") Fixes: 5364a0b4f4be ("arm64: dts: rockchip: move QCA6174A wakeup pin into its USB node") Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-08bnxt_en: Reset device on RX buffer errors.Michael Chan1-0/+6
If the RX completion indicates RX buffers errors, the RX ring will be disabled by firmware and no packets will be received on that ring from that point on. Recover by resetting the device. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08bnxt_en: Improve RX consumer index validity check.Michael Chan1-3/+7
There is logic to check that the RX/TPA consumer index is the expected index to work around a hardware problem. However, the potentially bad consumer index is first used to index into an array to reference an entry. This can potentially crash if the bad consumer index is beyond legal range. Improve the logic to use the consumer index for dereferencing after the validity check and log an error message. Fixes: fa7e28127a5a ("bnxt_en: Add workaround to detect bad opaque in rx completion (part 2)") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08net: macb driver, check for SKBTX_HW_TSTAMPPaul Thomas1-1/+3
Make sure SKBTX_HW_TSTAMP (i.e. SOF_TIMESTAMPING_TX_HARDWARE) has been enabled for this skb. It does fix the issue where normal socks that aren't expecting a timestamp will not wake up on select, but when a user does want a SOF_TIMESTAMPING_TX_HARDWARE it does work. Signed-off-by: Paul Thomas <pthomas8589@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08qlogic: qlcnic: fix use of SPEED_UNKNOWN ethtool constantMichael Zhivich1-1/+1
qlcnic driver uses u16 to store SPEED_UKNOWN ethtool constant, which is defined as -1, resulting in value truncation and thus incorrect test results against SPEED_UNKNOWN. For example, the following test will print "False": u16 speed = SPEED_UNKNOWN; if (speed == SPEED_UNKNOWN) printf("True"); else printf("False"); Change storage of speed to use u32 to avoid this issue. Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constantMichael Zhivich2-6/+6
tg3 driver uses u16 to store SPEED_UKNOWN ethtool constant, which is defined as -1, resulting in value truncation and thus incorrect test results against SPEED_UNKNOWN. For example, the following test will print "False": u16 speed = SPEED_UNKNOWN; if (speed == SPEED_UNKNOWN) printf("True"); else printf("False"); Change storage of speed to use u32 to avoid this issue. Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08ethtool: avoid signed-unsigned comparison in ethtool_validate_speed()Michael Zhivich1-1/+1
When building C++ userspace code that includes ethtool.h with "-Werror -Wall", g++ complains about signed-unsigned comparison in ethtool_validate_speed() due to definition of SPEED_UNKNOWN as -1. Explicitly cast SPEED_UNKNOWN to __u32 to match type of ethtool_validate_speed() argument. Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08net: ip6_gre: fix possible use-after-free in ip6erspan_rcvLorenzo Bianconi1-7/+13
erspan_v6 tunnels run __iptunnel_pull_header on received skbs to remove erspan header. This can determine a possible use-after-free accessing pkt_md pointer in ip6erspan_rcv since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device). Fix it resetting pkt_md pointer after __iptunnel_pull_header Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08net: ip_gre: fix possible use-after-free in erspan_rcvLorenzo Bianconi1-5/+10
erspan tunnels run __iptunnel_pull_header on received skbs to remove gre and erspan headers. This can determine a possible use-after-free accessing pkt_md pointer in erspan_rcv since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device). Fix it resetting pkt_md pointer after __iptunnel_pull_header Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08selftests/tpm2: Open tpm dev in unbuffered modeTadeusz Struk1-2/+2
In order to have control over how many bytes are read or written the device needs to be opened in unbuffered mode. Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08selftests/tpm2: Extend tests to cover partial readsTadeusz Struk2-0/+64
Three new tests added: 1. Send get random cmd, read header in 1st read, read the rest in second read - expect success 2. Send get random cmd, read only part of the response, send another get random command, read the response - expect success 3. Send get random cmd followed by another get random cmd, without reading the first response - expect the second cmd to fail with -EBUSY Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08KEYS: trusted: fix -Wvarags warningndesaulniers@google.com2-3/+3
Fixes the warning reported by Clang: security/keys/trusted.c:146:17: warning: passing an object that undergoes default argument promotion to 'va_start' has undefined behavior [-Wvarargs] va_start(argp, h3); ^ security/keys/trusted.c:126:37: note: parameter of type 'unsigned char' is declared here unsigned char *h2, unsigned char h3, ...) ^ Specifically, it seems that both the C90 (4.8.1.1) and C11 (7.16.1.4) standards explicitly call this out as undefined behavior: The parameter parmN is the identifier of the rightmost parameter in the variable parameter list in the function definition (the one just before the ...). If the parameter parmN is declared with ... or with a type that is not compatible with the type that results after application of the default argument promotions, the behavior is undefined. Link: https://github.com/ClangBuiltLinux/linux/issues/41 Link: https://www.eskimo.com/~scs/cclass/int/sx11c.html Suggested-by: David Laight <David.Laight@aculab.com> Suggested-by: Denis Kenzior <denkenz@gmail.com> Suggested-by: James Bottomley <jejb@linux.vnet.ibm.com> Suggested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08tpm: Fix the type of the return value in calc_tpm2_event_size()Yue Haibing1-2/+2
calc_tpm2_event_size() has an invalid signature because it returns a 'size_t' where as its signature says that it returns 'int'. Cc: <stable@vger.kernel.org> Fixes: 4d23cc323cdb ("tpm: add securityfs support for TPM 2.0 firmware event log") Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08KEYS: trusted: allow trusted.ko to initialize w/o a TPMJarkko Sakkinen1-5/+23
Allow trusted.ko to initialize w/o a TPM. This commit also adds checks to the exported functions to fail when a TPM is not available. Fixes: 240730437deb ("KEYS: trusted: explicitly use tpm_chip structure...") Cc: James Morris <jmorris@namei.org> Reported-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08tpm: fix an invalid condition in tpm_common_pollTadeusz Struk1-1/+8
The poll condition should only check response_length, because reads should only be issued if there is data to read. The response_read flag only prevents double writes. The problem was that the write set the response_read to false, enqued a tpm job, and returned. Then application called poll which checked the response_read flag and returned EPOLLIN. Then the application called read, but got nothing. After all that the async_work kicked in. Added also mutex_lock around the poll check to prevent other possible race conditions. Fixes: 9488585b21bef0df12 ("tpm: add support for partial reads") Reported-by: Mantas Mikulėnas <grawity@gmail.com> Tested-by: Mantas Mikulėnas <grawity@gmail.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08tpm: turn on TPM on suspend for TPM 1.xJarkko Sakkinen1-8/+6
tpm_chip_start/stop() should be also called for TPM 1.x devices on suspend. Add that functionality back. Do not lock the chip because it is unnecessary as there are no multiple threads using it when doing the suspend. Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()") Reported-by: Paul Zimmerman <pauldzim@gmail.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Domenico Andreoli <domenico.andreoli@linux.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08r8169: disable ASPM againHeiner Kallweit1-0/+6
There's a significant number of reports that re-enabling ASPM causes different issues, ranging from decreased performance to system not booting at all. This affects only a minority of users, but the number of affected users is big enough that we better switch off ASPM again. This will hurt notebook users who are not affected by the issues, they may see decreased battery runtime w/o ASPM. With the PCI core folks is being discussed to add generic sysfs attributes to control ASPM. Once this is in place brave enough users can re-enable ASPM on their system. Fixes: a99790bf5c7f ("r8169: Reinstate ASPM Support") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08MAINTAINERS: ieee802154: update documentation file patternStefan Schmidt1-1/+1
When moving the documentation for the ieee802154 subsystem from plain text to rst the file pattern in the MAINTAINERS file got wrong. Updating it here to fix scripts using this file. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-07net: vrf: Fix ping failed when vrf mtu is set to 0Miaohe Lin1-2/+6
When the mtu of a vrf device is set to 0, it would cause ping failed. So I think we should limit vrf mtu in a reasonable range to solve this problem. I set dev->min_mtu to IPV6_MIN_MTU, so it will works for both ipv4 and ipv6. And if dev->max_mtu still be 0 can be confusing, so I set dev->max_mtu to ETH_MAX_MTU. Here is the reproduce step: 1.Config vrf interface and set mtu to 0: 3: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master vrf1 state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:9e:dd:c1 brd ff:ff:ff:ff:ff:ff 2.Ping peer: 3: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master vrf1 state UP group default qlen 1000 link/ether 52:54:00:9e:dd:c1 brd ff:ff:ff:ff:ff:ff inet 10.0.0.1/16 scope global enp4s0 valid_lft forever preferred_lft forever connect: Network is unreachable 3.Set mtu to default value, ping works: PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data. 64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=1.88 ms Fixes: ad49bc6361ca2 ("net: vrf: remove MTU limits for vrf device") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-07slab: fix a crash by reading /proc/slab_allocatorsQian Cai1-1/+2
The commit 510ded33e075 ("slab: implement slab_root_caches list") changes the name of the list node within "struct kmem_cache" from "list" to "root_caches_node", but leaks_show() still use the "list" which causes a crash when reading /proc/slab_allocators. You need to have CONFIG_SLAB=y and CONFIG_MEMCG=y to see the problem, because without MEMCG all slab caches are root caches, and the "list" node happens to be the right one. Fixes: 510ded33e075 ("slab: implement slab_root_caches list") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Tobin C. Harding <tobin@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-07selftests: add a tc matchall test caseNicolas Dichtel1-0/+20
This is a follow up of the commit 0db6f8befc32 ("net/sched: fix ->get helper of the matchall cls"). To test it: $ cd tools/testing/selftests/tc-testing $ ln -s ../plugin-lib/nsPlugin.py plugins/20-nsPlugin.py $ ./tdc.py -n -e 2638 Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-07Linux 5.1-rc4Linus Torvalds1-1/+1
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.