| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There's a possible race condition in dm-verity - the prefetch work item
may race with suspend and it is possible that prefetch continues to run
while the device is suspended. Fix this by calling flush_workqueue and
dm_bufio_client_reset in the postsuspend hook.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
|
|
When using dm-integrity in standalone mode with a keyed hmac algorithm,
integrity tags are calculated and verified internally.
Using plain memcmp to compare the stored and computed tags may leak the
position of the first byte mismatch through side-channel analysis,
allowing to brute-force expected tags in linear time (e.g., by counting
single-stepping interrupts in confidential virtual machine environments).
Co-developed-by: Luca Wilke <work@luca-wilke.com>
Signed-off-by: Luca Wilke <work@luca-wilke.com>
Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
|
|
Calling verity_verify_io in bh for IO of all sizes is not suitable for
embedded devices. From our tests, it can improve the performance of 4K
synchronise random reads.
For example:
./fio --name=rand_read --ioengine=psync --rw=randread --bs=4K \
--direct=1 --numjobs=8 --runtime=60 --time_based --group_reporting \
--filename=/dev/block/mapper/xx-verity
But it will degrade the performance of 512K synchronise sequential reads
on our devices.
For example:
./fio --name=read --ioengine=psync --rw=read --bs=512K --direct=1 \
--numjobs=8 --runtime=60 --time_based --group_reporting \
--filename=/dev/block/mapper/xx-verity
A parameter array is introduced by this change. And users can modify the
default config by /sys/module/dm_verity/parameters/use_bh_bytes.
The default limits for NONE/RT/BE is set to 8192.
The default limits for IDLE is set to 0.
Call verity_verify_io directly when verity_end_io is not in hardirq.
Signed-off-by: LongPing Wei <weilongping@oppo.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Add support for zoned device by passing through report_zoned to the
underlying read device.
This is required to make enable xfstests xfs/311 on zoned devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
The devices with size >= 2^63 bytes can't be used reliably by userspace
because the type off_t is a signed 64-bit integer.
Therefore, we limit the maximum size of a device mapper device to
2^63-512 bytes.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
This patch introduces formal support for shrinking the cache origin by
reducing the cache target length via table reloads. Cache blocks mapped
beyond the new target length must be clean and are invalidated during
preresume. If any dirty blocks exist in the area being removed, the
preresume operation fails without setting the NEEDS_CHECK flag in
superblock, and the resume ioctl returns EFBIG. The cache device remains
suspended until a table reload with target length that fits existing
mappings is performed.
Without this patch, reducing the cache target length could result in
io errors (RHBZ: 2134334), out-of-bounds memory access to the discard
bitset, and security concerns regarding data leakage.
Verification steps:
1. create a cache metadata with some cached blocks mapped to the tail
of the origin device. Here we use cache_restore v1.0 to build a
metadata with one clean block mapped to the last origin block.
cat <<EOF >> cmeta.xml
<superblock uuid="" block_size="128" nr_cache_blocks="512" \
policy="smq" hint_width="4">
<mappings>
<mapping cache_block="0" origin_block="4095" dirty="false"/>
</mappings>
</superblock>
EOF
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
cache_restore -i cmeta.xml -o /dev/mapper/cmeta --metadata-version=2
dmsetup remove cmeta
2. bring up the cache whilst shrinking the cache origin by one block:
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524160 linear /dev/sdc 262144"
dmsetup create cache --table "0 524160 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
3. check the number of cached data blocks via dmsetup status. It is
expected to be zero.
dmsetup status cache | cut -d ' ' -f 7
In addition to the script above, this patch can be verified using the
"cache/resize" tests in dmtest-python:
./dmtest run --rx cache/resize/shrink_origin --result-set default
Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
A cache device failing to resume due to mapping errors should not be
retried, as the failure leaves a partially initialized policy object.
Repeating the resume operation risks triggering BUG_ON when reloading
cache mappings into the incomplete policy object.
Reproduce steps:
1. create a cache metadata consisting of 512 or more cache blocks,
with some mappings stored in the first array block of the mapping
array. Here we use cache_restore v1.0 to build the metadata.
cat <<EOF >> cmeta.xml
<superblock uuid="" block_size="128" nr_cache_blocks="512" \
policy="smq" hint_width="4">
<mappings>
<mapping cache_block="0" origin_block="0" dirty="false"/>
</mappings>
</superblock>
EOF
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
cache_restore -i cmeta.xml -o /dev/mapper/cmeta --metadata-version=2
dmsetup remove cmeta
2. wipe the second array block of the mapping array to simulate
data degradations.
mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \
2>/dev/null | hexdump -e '1/8 "%u\n"')
ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \
2>/dev/null | hexdump -e '1/8 "%u\n"')
dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock
3. try bringing up the cache device. The resume is expected to fail
due to the broken array block.
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dmsetup create cache --notable
dmsetup load cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
dmsetup resume cache
4. try resuming the cache again. An unexpected BUG_ON is triggered
while loading cache mappings.
dmsetup resume cache
Kernel logs:
(snip)
------------[ cut here ]------------
kernel BUG at drivers/md/dm-cache-policy-smq.c:752!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 332 Comm: dmsetup Not tainted 6.13.4 #3
RIP: 0010:smq_load_mapping+0x3e5/0x570
Fix by disallowing resume operations for devices that failed the
initial attempt.
Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Reorder fields and make uds_request_type and uds_zone_message packed,
to squeeze out some space. Use struct_group so the request reset code
no longer needs to care about field order.
On x86_64 this reduces the struct size from 144 to 120, which saves 48
kB (about 12%) per VDO hash zone.
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush()
generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC,
which causes the flush_bio to be throttled by wbt_wait().
An example from v5.4, similar problem also exists in upstream:
crash> bt 2091206
PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0"
#0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8
#1 [ffff800084a2f820] __schedule at ffff800040bfa0c4
#2 [ffff800084a2f880] schedule at ffff800040bfa4b4
#3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4
#4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc
#5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0
#6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254
#7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38
#8 [ffff800084a2fa60] generic_make_request at ffff800040570138
#9 [ffff800084a2fae0] submit_bio at ffff8000405703b4
#10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs]
#11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs]
#12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs]
#13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs]
#14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs]
#15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs]
#16 [ffff800084a2fdb0] process_one_work at ffff800040111d08
#17 [ffff800084a2fe00] worker_thread at ffff8000401121cc
#18 [ffff800084a2fe70] kthread at ffff800040118de4
After commit 2def2845cc33 ("xfs: don't allow log IO to be throttled"),
the metadata submitted by xlog_write_iclog() should not be throttled.
But due to the existence of the dm layer, throttling flush_bio indirectly
causes the metadata bio to be throttled.
Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes
wbt_should_throttle() return false to avoid wbt_wait().
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Tianxiang Peng <txpeng@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Clear provisional refcount values and count free/allocated blocks in
one integrated loop. Process 8 aligned bytes at a time instead of
every byte individually.
On an Intel i7-11850H this reduces the CPU time needed to process a
loaded refcount block by a factor of about 5-6. On a large system the
refcount loading may be the largest factor in device startup time.
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Lists are the new rings, so update all remaining references to rings to
talk about lists.
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Do forward error correction if metadata I/O fails.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
|
|
The return value of the function "forget_buffer" is not tested, so we can
remove it.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
The dm-integrity target didn't set the error string when memory
allocation failed. This patch fixes it.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
|
|
Added DM_TARGET_PASSES_CRYPTO feature to the striped target to utilize
the hardware encryption of the underlying storage devices, preventing
fallback to the crypto API.
Signed-off-by: Ed Tsai <ed.tsai@mediatek.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
At startup, vdo loads all the reference count data before the device
reports that it is ready. Using a pool of large metadata vios can
improve the startup speed of vdo. The pool of large vios is released
after the device is ready.
During normal operation, reference counts are updated 4kB at a time,
as before.
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
With larger-sized metadata vio pools, vdo will sometimes need to
issue I/O with a smaller size than the allocated size. Since
vio_reset_bio is where the bvec array and I/O size are initialized,
this reset interface must now specify what I/O size to use.
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Support pools with multiple data blocks per vio
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
This allows us to simplify the return_vio_to_pool interface.
Also, we don't need to use vdo_forget on local variables or arguments
that are about to go out of scope anyway.
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Remove checks that can't fail.
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Fix array initialization that triggers a warning:
error: initializer-string for array of ‘unsigned char’ is too long
[-Werror=unterminated-string-initialization]
Signed-off-by: Chung Chung <cchung@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Also remove MODULE_NAME and a BUG_ON check, both unneeded.
This fixes a warning about string truncation in snprintf that
will never happen in practice:
drivers/md/dm-vdo/vdo.c: In function ‘vdo_make’:
drivers/md/dm-vdo/vdo.c:564:5: error: ‘%s’ directive output may be truncated writing up to 55 bytes into a region of size 16 [-Werror=format-truncation=]
"%s%u", MODULE_NAME, instance);
^~
drivers/md/dm-vdo/vdo.c:563:2: note: ‘snprintf’ output between 2 and 66 bytes into a destination of size 16
snprintf(vdo->thread_name_prefix, sizeof(vdo->thread_name_prefix),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%s%u", MODULE_NAME, instance);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
This patch adds documentation for new option introduced in commit
4441686b24a1 ("dm-crypt: Allow to specify the integrity key size as option").
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
This patch adds documentation for new 'I' mode for dm-integrity
introduced in commit
fb0987682c62 ("dm-integrity: introduce the Inline mode").
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
This patch adds documentation for options introduced in commit
f811b83879fb ("dm-verity: introduce the options restart_on_error and panic_on_error").
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Now that the crc32() library function takes advantage of
architecture-specific optimizations, it is unnecessary to go through the
crypto API. Just use crc32(). This is much simpler, and it improves
performance due to eliminating the crypto API overhead. (However, this
only affects the TCW IV mode of dm-crypt, which is a compatibility mode
that is rarely used compared to other dm-crypt modes.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
|
|
Summary of Changes since 2024.11.30:
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
MM developers have an interest in the xarray code.
Cc: David Gow <davidgow@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Revert c7bb5cf9fc4e ("xarray: port tests to kunit"). It broke the build
when compiing the xarray userspace test harness code.
Reported-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Closes: https://lkml.kernel.org/r/07cf896e-adf8-414f-a629-a808fc26014a@oracle.com
Cc: David Gow <davidgow@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tamir Duberstein <tamird@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ensure test-only changes are sent to the relevant maintainer.
Link: https://lkml.kernel.org/r/20250129-xarray-test-maintainer-v1-1-482e31f30f47@gmail.com
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Cc: Mattew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update .mailmap to reflect my new (and final) primary email address,
carlos.bilbao@kernel.org. Also update contact information in files
Documentation/translations/sp_SP/index.rst and MAINTAINERS.
Link: https://lkml.kernel.org/r/20250130012248.1196208-1-carlos.bilbao@kernel.org
Signed-off-by: Carlos Bilbao <carlos.bilbao@kernel.org>
Cc: Carlos Bilbao <bilbao@vt.edu>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mattew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
gather_bootmem_prealloc() assumes the start nid as 0 and size as
num_node_state(N_MEMORY). That means in case if memory attached numa
nodes are interleaved, then gather_bootmem_prealloc_parallel() will fail
to scan few of these nodes.
Since memory attached numa nodes can be interleaved in any fashion, hence
ensure that the current code checks for all numa node ids
(.size = nr_node_ids). Let's still keep max_threads as N_MEMORY, so that
it can distributes all nr_node_ids among the these many no. threads.
e.g. qemu cmdline
========================
numa_cmd="-numa node,nodeid=1,memdev=mem1,cpus=2-3 -numa node,nodeid=0,cpus=0-1 -numa dist,src=0,dst=1,val=20"
mem_cmd="-object memory-backend-ram,id=mem1,size=16G"
w/o this patch for cmdline (default_hugepagesz=1GB hugepagesz=1GB hugepages=2):
==========================
~ # cat /proc/meminfo |grep -i huge
AnonHugePages: 0 kB
ShmemHugePages: 0 kB
FileHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 1048576 kB
Hugetlb: 0 kB
with this patch for cmdline (default_hugepagesz=1GB hugepagesz=1GB hugepages=2):
===========================
~ # cat /proc/meminfo |grep -i huge
AnonHugePages: 0 kB
ShmemHugePages: 0 kB
FileHugePages: 0 kB
HugePages_Total: 2
HugePages_Free: 2
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 1048576 kB
Hugetlb: 2097152 kB
Link: https://lkml.kernel.org/r/f8d8dad3a5471d284f54185f65d575a6aaab692b.1736592534.git.ritesh.list@gmail.com
Fixes: b78b27d02930 ("hugetlb: parallelize 1G hugetlb initialization")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reported-by: Pavithra Prakash <pavrampu@linux.ibm.com>
Suggested-by: Muchun Song <muchun.song@linux.dev>
Tested-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reviewed-by: Luiz Capitulino <luizcap@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Gang Li <gang.li@linux.dev>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We can run into an infinite loop in __get_longterm_locked() when
collect_longterm_unpinnable_folios() finds only folios that are isolated
from the LRU or were never added to the LRU. This can happen when all
folios to be pinned are never added to the LRU, for example when
vm_ops->fault allocated pages using cma_alloc() and never added them to
the LRU.
Fix it by simply taking a look at the list in the single caller, to see if
anything was added.
[zhaoyang.huang@unisoc.com: move definition of local]
Link: https://lkml.kernel.org/r/20250122012604.3654667-1-zhaoyang.huang@unisoc.com
Link: https://lkml.kernel.org/r/20250121020159.3636477-1-zhaoyang.huang@unisoc.com
Fixes: 67e139b02d99 ("mm/gup.c: refactor check_and_migrate_movable_pages()")
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Aijun Sun <aijun.sun@unisoc.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is a code error that will cause the swap entry allocator to reclaim
and check the whole cluster with an unexpected tail offset instead of the
part that needs to be reclaimed. This may cause corruption of the swap
map, so fix it.
Link: https://lkml.kernel.org/r/20250130115131.37777-1-ryncsn@gmail.com
Fixes: 3b644773eefd ("mm, swap: reduce contention on device lock")
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Chris Li <chrisl@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update my email address.
Link: https://lkml.kernel.org/r/20250122-wip-obbardc-update-email-v2-1-12bde6b79ad0@linaro.org
Signed-off-by: Christopher Obbard <christopher.obbard@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On NUMA systems, __GFP_THISNODE indicates that an allocation _must_ be on
a particular node, and failure to allocate on the desired node will result
in a failed allocation.
Skip __GFP_THISNODE allocations if we are running on a NUMA system, since
KFENCE can't guarantee which node its pool pages are allocated on.
Link: https://lkml.kernel.org/r/20250124120145.410066-1-elver@google.com
Fixes: 236e9f153852 ("kfence: skip all GFP_ZONEMASK allocations")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Chistoph Lameter <cl@linux.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since nilfs_bmap_lookup_contig() in nilfs_fiemap() calculates its result
by being prepared to go through potentially maxblocks == INT_MAX blocks,
the value in n may experience an overflow caused by left shift of blkbits.
While it is extremely unlikely to occur, play it safe and cast right hand
expression to wider type to mitigate the issue.
Found by Linux Verification Center (linuxtesting.org) with static analysis
tool SVACE.
Link: https://lkml.kernel.org/r/20250124222133.5323-1-konishi.ryusuke@gmail.com
Fixes: 622daaff0a89 ("nilfs2: fiemap support")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are 4 NUMA nodes on my machine, and each NUMA node has 32GB of
memory. I have configured 16GB of CMA memory on each NUMA node, and
starting a 32GB virtual machine with device passthrough is extremely slow,
taking almost an hour.
Long term GUP cannot allocate memory from CMA area, so a maximum of 16 GB
of no-CMA memory on a NUMA node can be used as virtual machine memory.
There is 16GB of free CMA memory on a NUMA node, which is sufficient to
pass the order-0 watermark check, causing the __compaction_suitable()
function to consistently return true.
For costly allocations, if the __compaction_suitable() function always
returns true, it causes the __alloc_pages_slowpath() function to fail to
exit at the appropriate point. This prevents timely fallback to
allocating memory on other nodes, ultimately resulting in excessively long
virtual machine startup times.
Call trace:
__alloc_pages_slowpath
if (compact_result == COMPACT_SKIPPED ||
compact_result == COMPACT_DEFERRED)
goto nopage; // should exit __alloc_pages_slowpath() from here
We could use the real unmovable allocation context to have
__zone_watermark_unusable_free() subtract CMA pages, and thus we won't
pass the order-0 check anymore once the non-CMA part is exhausted. There
is some risk that in some different scenario the compaction could in fact
migrate pages from the exhausted non-CMA part of the zone to the CMA part
and succeed, and we'll skip it instead. But only __GFP_NORETRY
allocations should be affected in the immediate "goto nopage" when
compaction is skipped, others will attempt with DEF_COMPACT_PRIORITY
anyway and won't fail without trying to compact-migrate the non-CMA
pageblocks into CMA pageblocks first, so it should be fine.
After this fix, it only takes a few tens of seconds to start a 32GB
virtual machine with device passthrough functionality.
Link: https://lore.kernel.org/lkml/1736335854-548-1-git-send-email-yangge1116@126.com/
Link: https://lkml.kernel.org/r/1737788037-8439-1-git-send-email-yangge1116@126.com
Signed-off-by: yangge <yangge1116@126.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If a memory allocation fails during dup_mmap(), the maple tree can be left
in an unsafe state for other iterators besides the exit path. All the
locks are dropped before the exit_mmap() call (in mm/mmap.c), but the
incomplete mm_struct can be reached through (at least) the rmap finding
the vmas which have a pointer back to the mm_struct.
Up to this point, there have been no issues with being able to find an
mm_struct that was only partially initialised. Syzbot was able to make
the incomplete mm_struct fail with recent forking changes, so it has been
proven unsafe to use the mm_struct that hasn't been initialised, as
referenced in the link below.
Although 8ac662f5da19f ("fork: avoid inappropriate uprobe access to
invalid mm") fixed the uprobe access, it does not completely remove the
race.
This patch sets the MMF_OOM_SKIP to avoid the iteration of the vmas on the
oom side (even though this is extremely unlikely to be selected as an oom
victim in the race window), and sets MMF_UNSTABLE to avoid other potential
users from using a partially initialised mm_struct.
When registering vmas for uprobe, skip the vmas in an mm that is marked
unstable. Modifying a vma in an unstable mm may cause issues if the mm
isn't fully initialised.
Link: https://lore.kernel.org/all/6756d273.050a0220.2477f.003d.GAE@google.com/
Link: https://lkml.kernel.org/r/20250127170221.1761366-1-Liam.Howlett@oracle.com
Fixes: d24062914837 ("fork: use __mt_dup() to duplicate maple tree in dup_mmap()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Handle more gracefully cases where no SRAT information is available, like
in VMs with no Numa support, and allow fake-numa configuration to complete
successfully in these cases
Link: https://lkml.kernel.org/r/20250127171623.1523171-1-bfaccini@nvidia.com
Fixes: 63db8170bf34 (“mm/fake-numa: allow later numa node hotplug”)
Signed-off-by: Bruno Faccini <bfaccini@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hyeonggon Yoo <hyeonggon.yoo@sk.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Memblock allocations are registered by kmemleak separately, based on their
physical address. During the scanning stage, it checks whether an object
is within the min_low_pfn and max_low_pfn boundaries and ignores it
otherwise.
With the recent addition of __percpu pointer leak detection (commit
6c99d4eb7c5e ("kmemleak: enable tracking for percpu pointers")), kmemleak
started reporting leaks in setup_zone_pageset() and
setup_per_cpu_pageset(). These were caused by the node_data[0] object
(initialised in alloc_node_data()) ending on the PFN_PHYS(max_low_pfn)
boundary. The non-strict upper boundary check introduced by commit
84c326299191 ("mm: kmemleak: check physical address when scan") causes the
pg_data_t object to be ignored (not scanned) and the __percpu pointers it
contains to be reported as leaks.
Make the max_low_pfn upper boundary check strict when deciding whether to
ignore a physical address object and not scan it.
Link: https://lkml.kernel.org/r/20250127184233.2974311-1-catalin.marinas@arm.com
Fixes: 84c326299191 ("mm: kmemleak: check physical address when scan")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: <stable@vger.kernel.org> [6.0.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Map my previous work email to my current one.
Link: https://lkml.kernel.org/r/20250120205659.139027-1-hamzamahfooz@linux.microsoft.com
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hans verkuil <hverkuil@xs4all.nl>
Cc: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Moving to a linux.dev email address.
Link: https://lkml.kernel.org/r/20250123231344.817358-1-yosry.ahmed@linux.dev
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
At least recent gdb releases (seen with 14.2) return SP_EL0 as signed long
which lets the right-shift always return 0.
Link: https://lkml.kernel.org/r/dcd2fabc-9131-4b48-8419-6444e2d67454@siemens.com
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In shrink_folio_list(), demote_folio_list() can be called 2 times.
Currently stat->nr_demoted will only store the last nr_demoted( the later
nr_demoted is always zero, the former nr_demoted will get lost), as a
result number of demoted pages is not accurate.
Accumulate the nr_demoted count across multiple calls to
demote_folio_list(), ensuring accurate reporting of demotion statistics.
[lizhijian@fujitsu.com: introduce local nr_demoted to fix nr_reclaimed double counting]
Link: https://lkml.kernel.org/r/20250111015253.425693-1-lizhijian@fujitsu.com
Link: https://lkml.kernel.org/r/20250110122133.423481-1-lizhijian@fujitsu.com
Fixes: f77f0c751478 ("mm,memcg: provide per-cgroup counters for NUMA balancing operations")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 23aab037106d ("ocfs2: fix UBSAN warning in ocfs2_verify_volume()")
introduced a regression bug. The blksz_bits value is already converted to
CPU endian in the previous code; therefore, the code shouldn't use
le32_to_cpu() anymore.
Link: https://lkml.kernel.org/r/20250121112204.12834-1-heming.zhao@suse.com
Fixes: 23aab037106d ("ocfs2: fix UBSAN warning in ocfs2_verify_volume()")
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit c1b3bb73d55e ("mm/zsmalloc: use zpdesc in
trylock_zspage()/lock_zspage()") introduces is_first_zpdesc() function.
However, the function is only used when CONFIG_DEBUG_VM=y.
When building with LLVM=1 and W=1 option, the following warning is
generated:
$ make -j12 W=1 LLVM=1 mm/zsmalloc.o
mm/zsmalloc.c:455:20: error: function 'is_first_zpdesc' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
455 | static inline bool is_first_zpdesc(struct zpdesc *zpdesc)
| ^~~~~~~~~~~~~~~
1 error generated.
Fix the warning by adding __maybe_unused attribute to the function.
No functional change intended.
Link: https://lkml.kernel.org/r/20250127231631.4363-1-42.hyeyoo@gmail.com
Fixes: c1b3bb73d55e ("mm/zsmalloc: use zpdesc in trylock_zspage()/lock_zspage()")
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501240958.4ILzuBrH-lkp@intel.com/
Cc: Alex Shi <alexs@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This fixes the following hard lockup in isolate_lru_folios() during memory
reclaim. If the LRU mostly contains ineligible folios this may trigger
watchdog.
watchdog: Watchdog detected hard LOCKUP on cpu 173
RIP: 0010:native_queued_spin_lock_slowpath+0x255/0x2a0
Call Trace:
_raw_spin_lock_irqsave+0x31/0x40
folio_lruvec_lock_irqsave+0x5f/0x90
folio_batch_move_lru+0x91/0x150
lru_add_drain_per_cpu+0x1c/0x40
process_one_work+0x17d/0x350
worker_thread+0x27b/0x3a0
kthread+0xe8/0x120
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1b/0x30
lruvec->lru_lock owner：
PID: 2865 TASK: ffff888139214d40 CPU: 40 COMMAND: "kswapd0"
#0 [fffffe0000945e60] crash_nmi_callback at ffffffffa567a555
#1 [fffffe0000945e68] nmi_handle at ffffffffa563b171
#2 [fffffe0000945eb0] default_do_nmi at ffffffffa6575920
#3 [fffffe0000945ed0] exc_nmi at ffffffffa6575af4
#4 [fffffe0000945ef0] end_repeat_nmi at ffffffffa6601dde
[exception RIP: isolate_lru_folios+403]
RIP: ffffffffa597df53 RSP: ffffc90006fb7c28 RFLAGS: 00000002
RAX: 0000000000000001 RBX: ffffc90006fb7c60 RCX: ffffea04a2196f88
RDX: ffffc90006fb7c60 RSI: ffffc90006fb7c60 RDI: ffffea04a2197048
RBP: ffff88812cbd3010 R8: ffffea04a2197008 R9: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffffea04a2197008
R13: ffffea04a2197048 R14: ffffc90006fb7de8 R15: 0000000003e3e937
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
<NMI exception stack>
#5 [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53
#6 [ffffc90006fb7cf8] shrink_active_list at ffffffffa597f788
#7 [ffffc90006fb7da8] balance_pgdat at ffffffffa5986db0
#8 [ffffc90006fb7ec0] kswapd at ffffffffa5987354
#9 [ffffc90006fb7ef8] kthread at ffffffffa5748238
crash>
Scenario:
User processe are requesting a large amount of memory and keep page active.
Then a module continuously requests memory from ZONE_DMA32 area.
Memory reclaim will be triggered due to ZONE_DMA32 watermark alarm reached.
However pages in the LRU(active_anon) list are mostly from
the ZONE_NORMAL area.
Reproduce:
Terminal 1: Construct to continuously increase pages active(anon).
mkdir /tmp/memory
mount -t tmpfs -o size=1024000M tmpfs /tmp/memory
dd if=/dev/zero of=/tmp/memory/block bs=4M
tail /tmp/memory/block
Terminal 2:
vmstat -a 1
active will increase.
procs ---memory--- ---swap-- ---io---- -system-- ---cpu--- ...
r b swpd free inact active si so bi bo
1 0 0 1445623076 45898836 83646008 0 0 0
1 0 0 1445623076 43450228 86094616 0 0 0
1 0 0 1445623076 41003480 88541364 0 0 0
1 0 0 1445623076 38557088 90987756 0 0 0
1 0 0 1445623076 36109688 93435156 0 0 0
1 0 0 1445619552 33663256 95881632 0 0 0
1 0 0 1445619804 31217140 98327792 0 0 0
1 0 0 1445619804 28769988 100774944 0 0 0
1 0 0 1445619804 26322348 103222584 0 0 0
1 0 0 1445619804 23875592 105669340 0 0 0
cat /proc/meminfo | head
Active(anon) increase.
MemTotal: 1579941036 kB
MemFree: 1445618500 kB
MemAvailable: 1453013224 kB
Buffers: 6516 kB
Cached: 128653956 kB
SwapCached: 0 kB
Active: 118110812 kB
Inactive: 11436620 kB
Active(anon): 115345744 kB
Inactive(anon): 945292 kB
When the Active(anon) is 115345744 kB, insmod module triggers
the ZONE_DMA32 watermark.
perf record -e vmscan:mm_vmscan_lru_isolate -aR
perf script
isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=2
nr_skipped=2 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=0
nr_skipped=0 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=28835844
nr_skipped=28835844 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=28835844
nr_skipped=28835844 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=29
nr_skipped=29 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=0
nr_skipped=0 nr_taken=0 lru=active_anon
See nr_scanned=28835844.
28835844 * 4k = 115343376KB approximately equal to 115345744 kB.
If increase Active(anon) to 1000G then insmod module triggers
the ZONE_DMA32 watermark. hard lockup will occur.
In my device nr_scanned = 0000000003e3e937 when hard lockup.
Convert to memory size 0x0000000003e3e937 * 4KB = 261072092 KB.
[ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53
ffffc90006fb7c30: 0000000000000020 0000000000000000
ffffc90006fb7c40: ffffc90006fb7d40 ffff88812cbd3000
ffffc90006fb7c50: ffffc90006fb7d30 0000000106fb7de8
ffffc90006fb7c60: ffffea04a2197008 ffffea0006ed4a48
ffffc90006fb7c70: 0000000000000000 0000000000000000
ffffc90006fb7c80: 0000000000000000 0000000000000000
ffffc90006fb7c90: 0000000000000000 0000000000000000
ffffc90006fb7ca0: 0000000000000000 0000000003e3e937
ffffc90006fb7cb0: 0000000000000000 0000000000000000
ffffc90006fb7cc0: 8d7c0b56b7874b00 ffff88812cbd3000
About the Fixes:
Why did it take eight years to be discovered?
The problem requires the following conditions to occur:
1. The device memory should be large enough.
2. Pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area.
3. The memory in ZONE_DMA32 needs to reach the watermark.
If the memory is not large enough, or if the usage design of ZONE_DMA32
area memory is reasonable, this problem is difficult to detect.
notes:
The problem is most likely to occur in ZONE_DMA32 and ZONE_NORMAL,
but other suitable scenarios may also trigger the problem.
Link: https://lkml.kernel.org/r/20241119060842.274072-1-liuye@kylinos.cn
Fixes: b2e18757f2c9 ("mm, vmscan: begin reclaiming pages on a per-node basis")
Signed-off-by: liuye <liuye@kylinos.cn>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Yang Shi <yang@os.amperecomputing.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If CONFIG_I2C=n:
WARNING: unmet direct dependencies detected for SND_SOC_AK4642
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && I2C [=n]
Selected by [y]:
- SH_7724_SOLUTION_ENGINE [=y] && CPU_SUBTYPE_SH7724 [=y] && SND_SIMPLE_CARD [=y]
WARNING: unmet direct dependencies detected for SND_SOC_DA7210
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && SND_SOC_I2C_AND_SPI [=n]
Selected by [y]:
- SH_ECOVEC [=y] && CPU_SUBTYPE_SH7724 [=y] && SND_SIMPLE_CARD [=y]
Fix this by replacing select by imply, instead of adding a dependency on
I2C.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501240836.OvXqmANX-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
Mikulas Patocka
Jo Van Bulck
LongPing Wei
Christoph Hellwig
Ming-Hung Tsai
Ken Raeburn
Jinliang Zheng
Sweet Tea Dorminy
Ed Tsai
Matthew Sakai
Chung Chung
Milan Broz
Eric Biggers
Linus Torvalds
Len Brown
Andrew Morton
Tamir Duberstein
Carlos Bilbao
Ritesh Harjani (IBM)
Zhaoyang Huang
Kairui Song
Christopher Obbard
Marco Elver
Nikita Zhandarovich
yangge
Liam R. Howlett
Bruno Faccini
Catalin Marinas
Hamza Mahfooz
Yosry Ahmed
Jan Kiszka
Li Zhijian
Heming Zhao
Hyeonggon Yoo
liuye
Geert Uytterhoeven