aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-01-15firmware: dmi_scan: Fix dmi_find_device descriptionJean Delvare1-1/+1
The description of dmi_find_device was apparently copied from a similar function in a different subsystem, but the parameter names were not adjusted as needed. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Andrey Panin <pazke@donpac.ru>
2016-01-15firmware: dmi_scan: Clarify dmi_save_extended_devicesJean Delvare1-6/+5
Get rid of the arbitrary 5-byte pointer offset, it served no purpose and made it harder to match the code with the SMBIOS specification. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Jordan Hargrave <jordan_hargrave@dell.com> Cc: Narendra K <narendra_k@dell.com>
2016-01-15firmware: dmi_scan: Optimize dmi_save_extended_devicesJean Delvare1-2/+4
Calling dmi_string_nosave isn't cheap, so avoid calling it twice in a row for the same string. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Jordan Hargrave <jordan_hargrave@dell.com> Cc: Narendra K <narendra_k@dell.com>
2016-01-15bgmac: Fix reversed test of build_skb() return value.David S. Miller1-1/+1
Fixes: f1640c3ddeec ("bgmac: fix a missing check for build_skb") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15bridge: fix lockdep addr_list_lock false positive splatNikolay Aleksandrov1-0/+8
After promisc mode management was introduced a bridge device could do dev_set_promiscuity from its ndo_change_rx_flags() callback which in turn can be called after the bridge's addr_list_lock has been taken (e.g. by dev_uc_add). This causes a false positive lockdep splat because the port interfaces' addr_list_lock is taken when br_manage_promisc() runs after the bridge's addr list lock was already taken. To remove the false positive introduce a custom bridge addr_list_lock class and set it on bridge init. A simple way to reproduce this is with the following: $ brctl addbr br0 $ ip l add l br0 br0.100 type vlan id 100 $ ip l set br0 up $ ip l set br0.100 up $ echo 1 > /sys/class/net/br0/bridge/vlan_filtering $ brctl addif br0 eth0 Splat: [ 43.684325] ============================================= [ 43.684485] [ INFO: possible recursive locking detected ] [ 43.684636] 4.4.0-rc8+ #54 Not tainted [ 43.684755] --------------------------------------------- [ 43.684906] brctl/1187 is trying to acquire lock: [ 43.685047] (_xmit_ETHER){+.....}, at: [<ffffffff8150169e>] dev_set_rx_mode+0x1e/0x40 [ 43.685460] but task is already holding lock: [ 43.685618] (_xmit_ETHER){+.....}, at: [<ffffffff815072a7>] dev_uc_add+0x27/0x80 [ 43.686015] other info that might help us debug this: [ 43.686316] Possible unsafe locking scenario: [ 43.686743] CPU0 [ 43.686967] ---- [ 43.687197] lock(_xmit_ETHER); [ 43.687544] lock(_xmit_ETHER); [ 43.687886] *** DEADLOCK *** [ 43.688438] May be due to missing lock nesting notation [ 43.688882] 2 locks held by brctl/1187: [ 43.689134] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81510317>] rtnl_lock+0x17/0x20 [ 43.689852] #1: (_xmit_ETHER){+.....}, at: [<ffffffff815072a7>] dev_uc_add+0x27/0x80 [ 43.690575] stack backtrace: [ 43.690970] CPU: 0 PID: 1187 Comm: brctl Not tainted 4.4.0-rc8+ #54 [ 43.691270] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [ 43.691770] ffffffff826a25c0 ffff8800369fb8e0 ffffffff81360ceb ffffffff826a25c0 [ 43.692425] ffff8800369fb9b8 ffffffff810d0466 ffff8800369fb968 ffffffff81537139 [ 43.693071] ffff88003a08c880 0000000000000000 00000000ffffffff 0000000002080020 [ 43.693709] Call Trace: [ 43.693931] [<ffffffff81360ceb>] dump_stack+0x4b/0x70 [ 43.694199] [<ffffffff810d0466>] __lock_acquire+0x1e46/0x1e90 [ 43.694483] [<ffffffff81537139>] ? netlink_broadcast_filtered+0x139/0x3e0 [ 43.694789] [<ffffffff8153b5da>] ? nlmsg_notify+0x5a/0xc0 [ 43.695064] [<ffffffff810d10f5>] lock_acquire+0xe5/0x1f0 [ 43.695340] [<ffffffff8150169e>] ? dev_set_rx_mode+0x1e/0x40 [ 43.695623] [<ffffffff815edea5>] _raw_spin_lock_bh+0x45/0x80 [ 43.695901] [<ffffffff8150169e>] ? dev_set_rx_mode+0x1e/0x40 [ 43.696180] [<ffffffff8150169e>] dev_set_rx_mode+0x1e/0x40 [ 43.696460] [<ffffffff8150189c>] dev_set_promiscuity+0x3c/0x50 [ 43.696750] [<ffffffffa0586845>] br_port_set_promisc+0x25/0x50 [bridge] [ 43.697052] [<ffffffffa05869aa>] br_manage_promisc+0x8a/0xe0 [bridge] [ 43.697348] [<ffffffffa05826ee>] br_dev_change_rx_flags+0x1e/0x20 [bridge] [ 43.697655] [<ffffffff81501532>] __dev_set_promiscuity+0x132/0x1f0 [ 43.697943] [<ffffffff81501672>] __dev_set_rx_mode+0x82/0x90 [ 43.698223] [<ffffffff815072de>] dev_uc_add+0x5e/0x80 [ 43.698498] [<ffffffffa05b3c62>] vlan_device_event+0x542/0x650 [8021q] [ 43.698798] [<ffffffff8109886d>] notifier_call_chain+0x5d/0x80 [ 43.699083] [<ffffffff810988b6>] raw_notifier_call_chain+0x16/0x20 [ 43.699374] [<ffffffff814f456e>] call_netdevice_notifiers_info+0x6e/0x80 [ 43.699678] [<ffffffff814f4596>] call_netdevice_notifiers+0x16/0x20 [ 43.699973] [<ffffffffa05872be>] br_add_if+0x47e/0x4c0 [bridge] [ 43.700259] [<ffffffffa058801e>] add_del_if+0x6e/0x80 [bridge] [ 43.700548] [<ffffffffa0588b5f>] br_dev_ioctl+0xaf/0xc0 [bridge] [ 43.700836] [<ffffffff8151a7ac>] dev_ifsioc+0x30c/0x3c0 [ 43.701106] [<ffffffff8151aac9>] dev_ioctl+0xf9/0x6f0 [ 43.701379] [<ffffffff81254345>] ? mntput_no_expire+0x5/0x450 [ 43.701665] [<ffffffff812543ee>] ? mntput_no_expire+0xae/0x450 [ 43.701947] [<ffffffff814d7b02>] sock_do_ioctl+0x42/0x50 [ 43.702219] [<ffffffff814d8175>] sock_ioctl+0x1e5/0x290 [ 43.702500] [<ffffffff81242d0b>] do_vfs_ioctl+0x2cb/0x5c0 [ 43.702771] [<ffffffff81243079>] SyS_ioctl+0x79/0x90 [ 43.703033] [<ffffffff815eebb6>] entry_SYSCALL_64_fastpath+0x16/0x7a CC: Vlad Yasevich <vyasevic@redhat.com> CC: Stephen Hemminger <stephen@networkplumber.org> CC: Bridge list <bridge@lists.linux-foundation.org> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> Fixes: 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode.") Reported-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15net: smsc: Add support h8300Yoshinori Sato2-2/+13
Add H8/300 platform support for smc91x Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15amdkfd: Copy from the proper user command pointerBorislav Petkov1-2/+1
8f1d57c17248 ("amdkfd: don't open-code memdup_user()") mistakenly uses an uninitialized local pointer, gcc complains: drivers/gpu/drm/amd/amdkfd/kfd_chardev.c: In function ‘kfd_ioctl_dbg_address_watch’: drivers/gpu/drm/amd/amdkfd/kfd_chardev.c:562:12: warning: ‘args_buff’ may be used uninitialized in this function [-Wmaybe-uninitialized] args_buff = memdup_user(args_buff, ^ Fix it. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-15xen-netback: free queues after freeing the net deviceDavid Vrabel1-11/+5
If a queue still has a NAPI instance added to the net device, freeing the queues early results in a use-after-free. The shouldn't ever happen because we disconnect and tear down all queues before freeing the net device, but doing this makes it obviously safe. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15xen-netback: delete NAPI instance when queue fails to initializeDavid Vrabel1-0/+1
When xenvif_connect() fails it may leave a stale NAPI instance added to the device. Make sure we delete it in the error path. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15xen-netback: use skb to determine number of required guest Rx requestsDavid Vrabel1-11/+9
Using the MTU or GSO size to determine the number of required guest Rx requests for an skb was subtly broken since these value may change at runtime. After 1650d5455bd2dc6b5ee134bd6fc1a3236c266b5b (xen-netback: always fully coalesce guest Rx packets) we always fully pack a packet into its guest Rx slots. Calculating the number of required slots from the packet length is then easy. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15net: sctp: Move sequence start handling into sctp_transport_get_idx()Geert Uytterhoeven1-3/+3
net/sctp/proc.c: In function ‘sctp_transport_get_idx’: net/sctp/proc.c:313: warning: ‘obj’ may be used uninitialized in this function This is currently a false positive, as all callers check for a zero offset first, and handle this case in the exact same way. Move the check and handling into sctp_transport_get_idx() to kill the compiler warning, and avoid future bugs. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15ipv6: update skb->csum when CE mark is propagatedEric Dumazet2-4/+17
When a tunnel decapsulates the outer header, it has to comply with RFC 6080 and eventually propagate CE mark into inner header. It turns out IP6_ECN_set_ce() does not correctly update skb->csum for CHECKSUM_COMPLETE packets, triggering infamous "hw csum failure" messages and stack traces. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15net: phy: turn carrier off on phy attachSjoerd Simons1-0/+5
The operstate of a networking device initially IF_OPER_UNKNOWN aka "unknown", updated on carrier state changes (with carrier state being on by default). This means it will stay unknown unless the carrier state goes to off at some point, which is not the case if the phy is already up/connected at startup. Explicitly turn off the carrier on phy attach, leaving the phy state machine to turn the carrier on when it has done the initial negotiation. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15net: macb: clear interrupts when disabling themNathan Sullivan1-0/+4
Disabling interrupts with the IDR register does not stop the macb hardware from asserting its interrupt line if there are interrupts pending. Always clear the interrupts using ISR, and be sure to write it on hardware that is not read-to-clear, like Zynq. Not doing so will cause interrupts when the driver doesn't expect them. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15sctp: support to lookup with ep+paddr in transport rhashtableXin Long1-15/+23
Now, when we sendmsg, we translate the ep to laddr by selecting the first element of the list, and then do a lookup for a transport. But sctp_hash_cmp() will compare it against asoc addr_list, which may be a subset of ep addr_list, meaning that this chosen laddr may not be there, and thus making it impossible to find the transport. So we fix it by using ep + paddr to lookup transports in hashtable. In sctp_hash_cmp, if .ep is set, we will check if this ep == asoc->ep, or we will do the laddr check. Fixes: d6c0256a60e6 ("sctp: add the rhashtable apis for sctp global transport hashtable") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reported-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15zsmalloc: reorganize struct size_class to pack 4 bytes holeWeijie Yang1-2/+2
Reoder the pages_per_zspage field in struct size_class which can eliminate the 4 bytes hole between it and stats field. Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15mm/zbud.c: use list_last_entry() instead of list_tail_entry()Geliang Tang1-4/+1
list_last_entry*( has been defined in list.h, so replace list_tail_entry() with it. Signed-off-by: Geliang Tang <geliangtang@163.com> Cc: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15zram/zcomp: do not zero out zcomp private pagesSergey Senozhatsky2-4/+4
Do not __GFP_ZERO allocated zcomp ->private pages. We keep allocated streams around and use them for read/write requests, so we supply a zeroed out ->private to compression algorithm as a scratch buffer only once -- the first time we use that stream. For the rest of IO requests served by this stream ->private usually contains some temporarily data from the previous requests. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15zram: pass gfp from zcomp frontend to backendMinchan Kim4-35/+23
Each zcomp backend uses own gfp flag but it's pointless because the context they could be called is driven by upper layer(ie, zcomp frontend). As well, zcomp frondend could call them in different context. One context(ie, zram init part) is it should be better to make sure successful allocation other context(ie, further stream allocation part for accelarating I/O speed) is just optional so let's pass gfp down from driver (ie, zcomp frontend) like normal MM convention. [sergey.senozhatsky@gmail.com: add missing __vmalloc zero and highmem gfps] Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15zram: try vmalloc() after kmalloc()Kyeongdon Kim2-4/+42
When we're using LZ4 multi compression streams for zram swap, we found out page allocation failure message in system running test. That was not only once, but a few(2 - 5 times per test). Also, some failure cases were continually occurring to try allocation order 3. In order to make parallel compression private data, we should call kzalloc() with order 2/3 in runtime(lzo/lz4). But if there is no order 2/3 size memory to allocate in that time, page allocation fails. This patch makes to use vmalloc() as fallback of kmalloc(), this prevents page alloc failure warning. After using this, we never found warning message in running test, also It could reduce process startup latency about 60-120ms in each case. For reference a call trace : Binder_1: page allocation failure: order:3, mode:0x10c0d0 CPU: 0 PID: 424 Comm: Binder_1 Tainted: GW 3.10.49-perf-g991d02b-dirty #20 Call trace: dump_backtrace+0x0/0x270 show_stack+0x10/0x1c dump_stack+0x1c/0x28 warn_alloc_failed+0xfc/0x11c __alloc_pages_nodemask+0x724/0x7f0 __get_free_pages+0x14/0x5c kmalloc_order_trace+0x38/0xd8 zcomp_lz4_create+0x2c/0x38 zcomp_strm_alloc+0x34/0x78 zcomp_strm_multi_find+0x124/0x1ec zcomp_strm_find+0xc/0x18 zram_bvec_rw+0x2fc/0x780 zram_make_request+0x25c/0x2d4 generic_make_request+0x80/0xbc submit_bio+0xa4/0x15c __swap_writepage+0x218/0x230 swap_writepage+0x3c/0x4c shrink_page_list+0x51c/0x8d0 shrink_inactive_list+0x3f8/0x60c shrink_lruvec+0x33c/0x4cc shrink_zone+0x3c/0x100 try_to_free_pages+0x2b8/0x54c __alloc_pages_nodemask+0x514/0x7f0 __get_free_pages+0x14/0x5c proc_info_read+0x50/0xe4 vfs_read+0xa0/0x12c SyS_read+0x44/0x74 DMA: 3397*4kB (MC) 26*8kB (RC) 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 13796kB [minchan@kernel.org: change vmalloc gfp and adding comment about gfp] [sergey.senozhatsky@gmail.com: tweak comments and styles] Signed-off-by: Kyeongdon Kim <kyeongdon.kim@lge.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15zram/zcomp: use GFP_NOIO to allocate streamsSergey Senozhatsky3-4/+4
We can end up allocating a new compression stream with GFP_KERNEL from within the IO path, which may result is nested (recursive) IO operations. That can introduce problems if the IO path in question is a reclaimer, holding some locks that will deadlock nested IOs. Allocate streams and working memory using GFP_NOIO flag, forbidding recursive IO and FS operations. An example: inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes: (jbd2_handle){+.+.?.}, at: start_this_handle+0x4ca/0x555 {IN-RECLAIM_FS-W} state was registered at: __lock_acquire+0x8da/0x117b lock_acquire+0x10c/0x1a7 start_this_handle+0x52d/0x555 jbd2__journal_start+0xb4/0x237 __ext4_journal_start_sb+0x108/0x17e ext4_dirty_inode+0x32/0x61 __mark_inode_dirty+0x16b/0x60c iput+0x11e/0x274 __dentry_kill+0x148/0x1b8 shrink_dentry_list+0x274/0x44a prune_dcache_sb+0x4a/0x55 super_cache_scan+0xfc/0x176 shrink_slab.part.14.constprop.25+0x2a2/0x4d3 shrink_zone+0x74/0x140 kswapd+0x6b7/0x930 kthread+0x107/0x10f ret_from_fork+0x3f/0x70 irq event stamp: 138297 hardirqs last enabled at (138297): debug_check_no_locks_freed+0x113/0x12f hardirqs last disabled at (138296): debug_check_no_locks_freed+0x33/0x12f softirqs last enabled at (137818): __do_softirq+0x2d3/0x3e9 softirqs last disabled at (137813): irq_exit+0x41/0x95 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(jbd2_handle); <Interrupt> lock(jbd2_handle); *** DEADLOCK *** 5 locks held by git/20158: #0: (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b #1: (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3 #2: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b #3: (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b #4: (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 stack backtrace: CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty #211 Call Trace: dump_stack+0x4c/0x6e mark_lock+0x384/0x56d mark_held_locks+0x5f/0x76 lockdep_trace_alloc+0xb2/0xb5 kmem_cache_alloc_trace+0x32/0x1e2 zcomp_strm_alloc+0x25/0x73 [zram] zcomp_strm_multi_find+0xe7/0x173 [zram] zcomp_strm_find+0xc/0xe [zram] zram_bvec_rw+0x2ca/0x7e0 [zram] zram_make_request+0x1fa/0x301 [zram] generic_make_request+0x9c/0xdb submit_bio+0xf7/0x120 ext4_io_submit+0x2e/0x43 ext4_bio_write_page+0x1b7/0x300 mpage_submit_page+0x60/0x77 mpage_map_and_submit_buffers+0x10f/0x21d ext4_writepages+0xc8c/0xe1b do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x84/0x8b filemap_flush+0x1c/0x1e ext4_alloc_da_blocks+0xb8/0x117 ext4_rename+0x132/0x6dc ? mark_held_locks+0x5f/0x76 ext4_rename2+0x29/0x2b vfs_rename+0x540/0x636 SyS_renameat2+0x359/0x44d SyS_rename+0x1e/0x20 entry_SYSCALL_64_fastpath+0x12/0x6f [minchan@kernel.org: add stable mark] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Kyeongdon Kim <kyeongdon.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15net: hns: fixes no syscon error when init mdioyankejian1-1/+1
As dtsi files use the normal naming conventions using '-' instead of '_' inside of property names, the driver needs to update the phandle name strings of the of_parse_phandle func. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15dts: hisi: fixes no syscon fault when init mdioyankejian3-2/+23
When linux start up, we get the log below: "Hi-HNS_MDIO 803c0000.mdio: no syscon hisilicon,peri-c-subctrl mdio_bus mdio@803c0000: mdio sys ctl reg has not maped" The source code about the subctrl is dealt syscon, but dts doesn't. It cause such fault, so this patch adds the syscon info on dts files to fixes it. Signed-off-by: Kejian Yan <yankejian@huawei.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15net: preserve IP control block during GSO segmentationKonstantin Khlebnikov5-5/+11
Skb_gso_segment() uses skb control block during segmentation. This patch adds 32-bytes room for previous control block which will be copied into all resulting segments. This patch fixes kernel crash during fragmenting forwarded packets. Fragmentation requires valid IP CB in skb for clearing ip options. Also patch removes custom save/restore in ovs code, now it's redundant. Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Link: http://lkml.kernel.org/r/CALYGNiP-0MZ-FExV2HutTvE9U-QQtkKSoE--KN=JQE5STYsjAA@mail.gmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-15ALSA: timer: Code cleanupTakashi Iwai1-17/+11
This is a minor code cleanup without any functional changes: - Kill keep_flag argument from _snd_timer_stop(), as all callers pass only it false. - Remove redundant NULL check in _snd_timer_stop(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-15ALSA: timer: Harden slave timer list handlingTakashi Iwai1-4/+14
A slave timer instance might be still accessible in a racy way while operating the master instance as it lacks of locking. Since the master operation is mostly protected with timer->lock, we should cope with it while changing the slave instance, too. Also, some linked lists (active_list and ack_list) of slave instances aren't unlinked immediately at stopping or closing, and this may lead to unexpected accesses. This patch tries to address these issues. It adds spin lock of timer->lock (either from master or slave, which is equivalent) in a few places. For avoiding a deadlock, we ensure that the global slave_active_lock is always locked at first before each timer lock. Also, ack and active_list of slave instances are properly unlinked at snd_timer_stop() and snd_timer_close(). Last but not least, remove the superfluous call of _snd_timer_stop() at removing slave links. This is a noop, and calling it may confuse readers wrt locking. Further cleanup will follow in a later patch. Actually we've got reports of use-after-free by syzkaller fuzzer, and this hopefully fixes these issues. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-15ALSA: hda - Add fixup for Dell Latitidue E6540Takashi Iwai1-0/+1
Another Dell model, another fixup entry: Latitude E6540 needs the same fixup as other Latitude E series as workaround for noise problems. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=104341 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-14mm: add tracepoint for scanning pagesEbru Akagunduz2-32/+270
This patch series makes swapin readahead up to a certain number to gain more thp performance and adds tracepoint for khugepaged_scan_pmd, collapse_huge_page, __collapse_huge_page_isolate. This patch series was written to deal with programs that access most, but not all, of their memory after they get swapped out. Currently these programs do not get their memory collapsed into THPs after the system swapped their memory out, while they would get THPs before swapping happened. This patch series was tested with a test program, it allocates 400MB of memory, writes to it, and then sleeps. I force the system to swap out all. Afterwards, the test program touches the area by writing and leaves a piece of it without writing. This shows how much swap in readahead made by the patch. Test results: After swapped out ------------------------------------------------------------------- | Anonymous | AnonHugePages | Swap | Fraction | ------------------------------------------------------------------- With patch | 90076 kB | 88064 kB | 309928 kB | %99 | ------------------------------------------------------------------- Without patch | 194068 kB | 192512 kB | 205936 kB | %99 | ------------------------------------------------------------------- After swapped in ------------------------------------------------------------------- | Anonymous | AnonHugePages | Swap | Fraction | ------------------------------------------------------------------- With patch | 201408 kB | 198656 kB | 198596 kB | %98 | ------------------------------------------------------------------- Without patch | 292624 kB | 192512 kB | 107380 kB | %65 | ------------------------------------------------------------------- This patch (of 3): Using static tracepoints, data of functions is recorded. It is good to automatize debugging without doing a lot of changes in the source code. This patch adds tracepoint for khugepaged_scan_pmd, collapse_huge_page and __collapse_huge_page_isolate. [dan.carpenter@oracle.com: add a missing tab] Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14drivers/base/memory.c: fix kernel warning during memory hotplug on ppc64John Allen1-10/+6
Fix a bug where a kernel warning is triggered when performing a memory hotplug on ppc64. This warning may also occur on any architecture that uses the memory_probe_store interface. WARNING: at drivers/base/memory.c:200 CPU: 9 PID: 13042 Comm: systemd-udevd Not tainted 4.4.0-rc4-00113-g0bd0f1e-dirty #7 NIP [c00000000055e034] pages_correctly_reserved+0x134/0x1b0 LR [c00000000055e7f8] memory_subsys_online+0x68/0x140 Call Trace: memory_subsys_online+0x68/0x140 device_online+0xb4/0x120 store_mem_state+0xb0/0x180 dev_attr_store+0x34/0x60 sysfs_kf_write+0x64/0xa0 kernfs_fop_write+0x17c/0x1e0 __vfs_write+0x40/0x160 vfs_write+0xb8/0x200 SyS_write+0x60/0x110 system_call+0x38/0xd0 The warning is triggered because there is a udev rule that automatically tries to online memory after it has been added. The udev rule varies from distro to distro, but will generally look something like: SUBSYSTEM=="memory", ACTION=="add", ATTR{state}=="offline", ATTR{state}="online" On any architecture that uses memory_probe_store to reserve memory, the udev rule will be triggered after the first section of the block is reserved and will subsequently attempt to online the entire block, interrupting the memory reservation process and causing the warning. This patch modifies memory_probe_store to add a block of memory with a single call to add_memory as opposed to looping through and adding each section individually. A single call to add_memory is protected by the mem_hotplug mutex which will prevent the udev rule from onlining memory until the reservation of the entire block is complete. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14mm/page_isolation: use macro to judge the alignmentNaoya Horiguchi1-2/+2
Signed-off-by: Wang Xiaoqiang <wangxq10@lzu.edu.cn> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14mm: fix noisy sparse warning in LIBCFS_ALLOC_PRE()Joshua Clayton1-1/+1
Running sparse on drivers/staging/lustre results in dozens of warnings: include/linux/gfp.h:281:41: warning: odd constant _Bool cast (400000 becomes 1) Use "!!" to explicitly convert to bool and get rid of the warning. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14mm: rework virtual memory accountingKonstantin Khlebnikov9-58/+54
When inspecting a vague code inside prctl(PR_SET_MM_MEM) call (which testing the RLIMIT_DATA value to figure out if we're allowed to assign new @start_brk, @brk, @start_data, @end_data from mm_struct) it's been commited that RLIMIT_DATA in a form it's implemented now doesn't do anything useful because most of user-space libraries use mmap() syscall for dynamic memory allocations. Linus suggested to convert RLIMIT_DATA rlimit into something suitable for anonymous memory accounting. But in this patch we go further, and the changes are bundled together as: * keep vma counting if CONFIG_PROC_FS=n, will be used for limits * replace mm->shared_vm with better defined mm->data_vm * account anonymous executable areas as executable * account file-backed growsdown/up areas as stack * drop struct file* argument from vm_stat_account * enforce RLIMIT_DATA for size of data areas This way code looks cleaner: now code/stack/data classification depends only on vm_flags state: VM_EXEC & ~VM_WRITE -> code (VmExe + VmLib in proc) VM_GROWSUP | VM_GROWSDOWN -> stack (VmStk) VM_WRITE & ~VM_SHARED & !stack -> data (VmData) The rest (VmSize - VmData - VmStk - VmExe - VmLib) could be called "shared", but that might be strange beast like readonly-private or VM_IO area. - RLIMIT_AS limits whole address space "VmSize" - RLIMIT_STACK limits stack "VmStk" (but each vma individually) - RLIMIT_DATA now limits "VmData" Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Willy Tarreau <w@1wt.eu> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Kees Cook <keescook@google.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14include/linux/memblock.h: fix ordering of 'flags' argument in commentsFlorian Fainelli1-2/+2
for_each_free_mem_range() and for_each_free_mem_range_reverse() both accept a 'flags' argument, the comment surrounding the macro placed the 'flags' documentation at the very end, while 'flags' is in fact the 3rd argument to the macro, so let's preserve natural ordering here. Fixes: fc6daaf931518 ("mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14mm: move lru_to_page to mm_inline.hGeliang Tang3-2/+3
Move lru_to_page() from internal.h to mm_inline.h. Signed-off-by: Geliang Tang <geliangtang@163.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14Documentation/filesystems: describe the shared memory usage/accountingRodrigo Freire2-4/+6
The Shared Memory accounting support is present in Kernel since commit 4b02108ac1b3 ("mm: oom analysis: add shmem vmstat") and in userland free(1) since 2014. This patch updates the Documentation to reflect this change. Signed-off-by: Rodrigo Freire <rfreire@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14memory-hotplug: don't BUG() in register_memory_resource()Vitaly Kuznetsov1-4/+5
Out of memory condition is not a bug and while we can't add new memory in such case crashing the system seems wrong. Propagating the return value from register_memory_resource() requires interface change. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Sheng Yong <shengyong1@huawei.com> Cc: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14hugetlb: make mm and fs code explicitly non-modularPaul Gortmaker2-63/+3
The Kconfig currently controlling compilation of this code is: config HUGETLBFS bool "HugeTLB file system support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering gets moved to earlier levels when we use the more appropriate initcalls here. Originally I had the fs part and the mm part as separate commits, just by happenstance of the nature of how I detected these non-modular use cases. But that can possibly introduce regressions if the patch merge ordering puts the fs part 1st -- as the 0-day testing reported a splat at mount time. Investigating with "initcall_debug" showed that the delta was init_hugetlbfs_fs being called _before_ hugetlb_init instead of after. So both the fs change and the mm change are here together. In addition, it worked before due to luck of link order, since they were both in the same initcall category. So we now have the fs part using fs_initcall, and the mm part using subsys_initcall, which puts it one bucket earlier. It now passes the basic sanity test that failed in earlier 0-day testing. We delete the MODULE_LICENSE tag and capture that information at the top of the file alongside author comments, etc. We don't replace module.h with init.h since the file already has that. Also note that MODULE_ALIAS is a no-op for non-modular code. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reported-by: kernel test robot <ying.huang@linux.intel.com> Cc: Nadia Yvette Chambers <nyc@holomorphy.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14mm/swapfile.c: use list_for_each_entry_safe in free_swap_count_continuationsGeliang Tang1-5/+4
Use list_for_each_entry_safe() instead of list_for_each_safe() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14mm: /proc/pid/clear_refs: no need to clear VM_SOFTDIRTY in clear_soft_dirty_pmd()Oleg Nesterov1-3/+0
clear_soft_dirty_pmd() is called by clear_refs_write(CLEAR_REFS_SOFT_DIRTY), VM_SOFTDIRTY was already cleared before walk_page_range(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14mm: make sure isolate_lru_page() is never called for tail pageKirill A. Shutemov1-0/+1
The VM_BUG_ON_PAGE() would catch such cases if any still exists. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14vmstat: make vmstat_updater deferrable again and shut down on idleChristoph Lameter3-25/+47
Currently the vmstat updater is not deferrable as a result of commit ba4877b9ca51 ("vmstat: do not use deferrable delayed work for vmstat_update"). This in turn can cause multiple interruptions of the applications because the vmstat updater may run at Make vmstate_update deferrable again and provide a function that folds the differentials when the processor is going to idle mode thus addressing the issue of the above commit in a clean way. Note that the shepherd thread will continue scanning the differentials from another processor and will reenable the vmstat workers if it detects any changes. Fixes: ba4877b9ca51 ("vmstat: do not use deferrable delayed work for vmstat_update") Signed-off-by: Christoph Lameter <cl@linux.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14memcg: avoid vmpressure oops when memcg disabledHugh Dickins1-1/+1
A CONFIG_MEMCG=y kernel booted with "cgroup_disable=memory" crashes on a NULL memcg (but non-NULL root_mem_cgroup) when vmpressure kicks in. Here's the patch I use to avoid that, but you might prefer a test on mem_cgroup_disabled() somewhere. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David S. Miller <davem@davemloft.net> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14mm: memcontrol: switch to the updated jump-label APIJohannes Weiner3-12/+12
According to <linux/jump_label.h> the direct use of struct static_key is deprecated. Update the socket and slab accounting code accordingly. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: David S. Miller <davem@davemloft.net> Reported-by: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14mm: memcontrol: hook up vmpressure to socket pressureJohannes Weiner5-40/+104
Let the networking stack know when a memcg is under reclaim pressure so that it can clamp its transmit windows accordingly. Whenever the reclaim efficiency of a cgroup's LRU lists drops low enough for a MEDIUM or HIGH vmpressure event to occur, assert a pressure state in the socket and tcp memory code that tells it to curb consumption growth from sockets associated with said control group. Traditionally, vmpressure reports for the entire subtree of a memcg under pressure, which drops useful information on the individual groups reclaimed. However, it's too late to change the userinterface, so add a second reporting mode that reports on the level of reclaim instead of at the level of pressure, and use that report for sockets. vmpressure events are naturally edge triggered, so for hysteresis assert socket pressure for a second to allow for subsequent vmpressure events to occur before letting the socket code return to normal. This will likely need finetuning for a wider variety of workloads, but for now stick to the vmpressure presets and keep hysteresis simple. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14mm: memcontrol: account socket memory in unified hierarchy memory controllerJohannes Weiner3-25/+110
Socket memory can be a significant share of overall memory consumed by common workloads. In order to provide reasonable resource isolation in the unified hierarchy, this type of memory needs to be included in the tracking/accounting of a cgroup under active memory resource control. Overhead is only incurred when a non-root control group is created AND the memory controller is instructed to track and account the memory footprint of that group. cgroup.memory=nosocket can be specified on the boot commandline to override any runtime configuration and forcibly exclude socket memory from active memory resource control. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14mm: memcontrol: move socket code for unified hierarchy accountingJohannes Weiner1-74/+74
The unified hierarchy memory controller will account socket memory. Move the infrastructure functions accordingly. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14mm: memcontrol: do not account memory+swap on unified hierarchyJohannes Weiner1-19/+25
The unified hierarchy memory controller doesn't expose the memory+swap counter to userspace, but its accounting is hardcoded in all charge paths right now, including the per-cpu charge cache ("the stock"). To avoid adding yet more pointless memory+swap accounting with the socket memory support in unified hierarchy, disable the counter altogether when in unified hierarchy mode. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14mm: memcontrol: generalize the socket accounting jump labelJohannes Weiner5-14/+8
The unified hierarchy memory controller is going to use this jump label as well to control the networking callbacks. Move it to the memory controller code and give it a more generic name. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14net: tcp_memcontrol: simplify linkage between socket and page counterJohannes Weiner10-171/+69
There won't be any separate counters for socket memory consumed by protocols other than TCP in the future. Remove the indirection and link sockets directly to their owning memory cgroup. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14net: tcp_memcontrol: sanitize tcp memory accounting callbacksJohannes Weiner6-76/+77
There won't be a tcp control soft limit, so integrating the memcg code into the global skmem limiting scheme complicates things unnecessarily. Replace this with simple and clear charge and uncharge calls--hidden behind a jump label--to account skb memory. Note that this is not purely aesthetic: as a result of shoehorning the per-memcg code into the same memory accounting functions that handle the global level, the old code would compare the per-memcg consumption against the smaller of the per-memcg limit and the global limit. This allowed the total consumption of multiple sockets to exceed the global limit, as long as the individual sockets stayed within bounds. After this change, the code will always compare the per-memcg consumption to the per-memcg limit, and the global consumption to the global limit, and thus close this loophole. Without a soft limit, the per-memcg memory pressure state in sockets is generally questionable. However, we did it until now, so we continue to enter it when the hard limit is hit, and packets are dropped, to let other sockets in the cgroup know that they shouldn't grow their transmit windows, either. However, keep it simple in the new callback model and leave memory pressure lazily when the next packet is accepted (as opposed to doing it synchroneously when packets are processed). When packets are dropped, network performance will already be in the toilet, so that should be a reasonable trade-off. As described above, consumption is now checked on the per-memcg level and the global level separately. Likewise, memory pressure states are maintained on both the per-memcg level and the global level, and a socket is considered under pressure when either level asserts as much. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.