aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-12-16ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controllerFrieder Schrempf4-0/+12
We will move the FSL QSPI driver to the SPI framework soon. To prepare and to make sure the full buswidth is used (as it is with the current driver), let's add the right properties. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-16ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodesFrieder Schrempf2-4/+4
The current driver does not use the reg properties, but we will add a new driver soon. To make sure we have a consistent scheme, let's fix the reg properties here. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-16ARM: dts: Remove unused properties from FSL QSPI driver nodesFrieder Schrempf1-3/+0
The properties 'bus-num', 'fsl,spi-num-chipselects' and 'fsl,spi-flash-chipselects' were never read by the driver and can be removed. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx51-zii-rdu1: Do not specify "power-gpio" for hpa1Andrey Smirnov1-4/+13
TPA6130A2 SD pin on RDU1 is not really controlled by SoC and instead is only meant to notify the system that audio was "muted" by external actors. To accommodate that, drop "power-gpio" property of hpa1 node as well as specify a name for that GPIO so that userspace can access it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul: Remove extra space between node name and braceLeonard Crestez1-1/+1
Fixes: 7d1cd2978664 ("ARM: dts: imx6ul: add gpmi support") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl-sabresd: Use GPIO_ACTIVE_HIGH for regulatorsFabio Estevam1-4/+4
Passing GPIO_ACTIVE_HIGH as GPIO flags for the GPIO controlled regulator improves the readability, so use it instead of the hardcoded number. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul: add flexcan supportDong Aisheng3-2/+55
Add flexcan support for i.MX6UL board. Change the place of CAN node delete due to i.MX6ULZ include i.MX6UL dts but not support flexcan. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx5: add gpu nodesJonathan Marek2-0/+20
This adds the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, now supported by the freedreno driver. The compatible for the iMX51 uses a patchid of 1, which is used by drm/msm driver to identify the smaller 128KiB GMEM size. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl-sabresd: add accelerometer sensor supportAnson Huang1-0/+15
Add accelerometer sensor mma8451 support on i2c1 bus. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl-sabresd: add magnetometer sensor supportAnson Huang1-0/+15
Add magnetometer sensor mag3110 support on i2c3 bus. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl-sabresd: add light sensor supportAnson Huang1-0/+33
Add isl29023 light sensor support on i2c3 bus, the light sensor's power is controlled by a fixed regulator, since the isl29023 driver and most of other sensors on same board like mag3110 and mma8451 do NOT support regulator operation currently, they are all controlled by this regulator, so this patch also adds the fixed regulator support and make it always on. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl-sabresd: Move regulators outside of "simple-bus"Fabio Estevam1-46/+36
It is not recommended to place regulators inside "simple-bus", so move them out to make it cleaner the addition of new regulators. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl: Fix memory node duplicationMarco Franchi73-2/+72
Boards based on imx6qdl have duplicate memory nodes: - One coming from the board device tree file: memory@ - One coming from the imx6qdl.dtsi file. Fix the duplication by removing the memory node from the imx6qdl.dtsi file and by adding 'device_type = "memory";' in the board Device Tree. Converted using the following command: perl -p0777i -e 's/memory\@10000000 \{\n/memory\@10000000 \{\n\t\tdevice_type = \"memory\";\n/m' `find ./arch/arm/boot/dts -name "imx6*"`` Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6dl-mamoj: Add a memory nodeFabio Estevam1-0/+6
Add a memory node, with an empty memory size, which will be filled by the bootloader. This is done in preparation for removing the memory node from imx6qdl.dtsi. Reported-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx53-voipac-dmm-668: Fix memory node duplicationFabio Estevam1-6/+2
imx53-voipac-dmm-668 has two memory nodes, but the correct representation would be to use a single one with two reg entries - one for each RAM chip select, so fix it accordingly. Reported-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: vf610-zii-scu4-aib: Add HI8435 supportFabio Estevam1-0/+14
On the vf610-zii-scu4-aib board there is a hi8435 (32-channel discrete-to-digital SPI sensor device) in the DSPI0 bus. Add support for it. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl-sabresd: add egalax touch screen support on i2c2 busAnson Huang1-0/+16
Add egalax touch screen support on i2c2 bus, it is connected to LVDS0, while the existing one on i2c3 bus is connected to LVDS1. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7s: Add flexcan stop mode wakeup supportAisheng Dong1-0/+2
Add stop-mode property which is required by stop mode wakeup feature. Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul: Add flexcan stop mode wakeup supportAisheng Dong1-0/+2
Add stop-mode property which is required by stop mode wakeup feature. Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl: Add flexcan stop mode wakeup supportAisheng Dong1-0/+2
Add stop-mode property which is required by stop mode wakeup feature. Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6sx: Add flexcan stop mode wakeup supportAisheng Dong1-0/+2
Add stop-mode property which is required by stop mode wakeup feature. Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul-pico: Add the imx6ul-pico-pi variantFabio Estevam3-32/+98
The imx6ul-pico-pi contains a imx6ul-pico SoM and a pi baseboard: https://www.technexion.com/products/pico-baseboards/detail/PICO-PI Add support for it. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul-pico-hobbit: Extend peripherals supportFabio Estevam1-0/+30
This adds following peripherals support: - ADC - GPIO LED - GPIOs Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul-pico-hobbit: Make the child led nodes standardFabio Estevam1-2/+2
Use the same child led node and label name as used in the imx7d-pico-hobbit board. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul-pico-hobbit: Move SoM related part to imx6ul-pico.dtsiFabio Estevam2-461/+511
imx6ul-pico-hobbit board contains: - One SoM board (imx6ul pico) - One base board (hobbit). In order to make it easier for adding support for other board variants, move the commom SoM part to the imx6ul-pico.dtsi file. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul-pico-hobbit: Switch to SPDX identifierFabio Estevam1-45/+7
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: ls1021a: add qdma device tree nodesPeng Ma1-0/+20
add the qDMA device tree nodes for LS1021A devices. Signed-off-by: Wen He <wen.he_1@nxp.com> Signed-off-by: Peng Ma <peng.ma@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: vf: Fix memory node duplicationFabio Estevam11-2/+9
Boards based on vf500/vf600 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the vf500.dtsi/vf610m4.dtsi files. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx7: Correct mask for GIC PPI interruptsFabio Estevam2-5/+26
The GIC_CPU_MASK_SIMPLE() macro should take as its argument the actual number of CPU cores the interrupt controller is wired to. i.MX7S contains a single Cortex-A7, hence the second interrupt specifier cell for Private Peripheral Interrupts should use "GIC_CPU_MASK_SIMPLE(1)". Likewise, i.MX7D contains two Cortex-A7 cores, so it should use "GIC_CPU_MASK_SIMPLE(2)" instead. Tested on a imx7s-warp. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6ul: Correct mask for GIC PPI interruptsFabio Estevam1-5/+5
The GIC_CPU_MASK_SIMPLE() macro should take as its argument the actual number of CPU cores the interrupt controller is wired to. i.MX6UL contains a single Cortex-A7, hence the second interrupt specifier cell for Private Peripheral Interrupts should use "GIC_CPU_MASK_SIMPLE(1)". Tested on a imx6ul-evk. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx53: Switch to SPDX identifierFabio Estevam1-11/+4
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx50: Switch to SPDX identifierFabio Estevam1-12/+5
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl-sabreauto: add flexcan supportAisheng Dong1-0/+47
The flexcan1 is pin conflict with fec. User would make flexcan1 enabled with fec disabled to use CAN. Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6sx-sabreauto: add flexcan supportAisheng Dong1-0/+57
The CAN transceiver on MX6SX Sabreauto board seems in sleep mode by default after power up the board. User has to press the wakeup key on ARD baseboard before using the transceiver, or it may not work properly when power up the board at the first time(warm reset does not have such issue). This patch operates the wake pin too besides stby/en pins by chaining them together in regulator mode. Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6sx-sdb: add flexcan supportAisheng Dong3-0/+59
CAN transceiver is different on RevA and RevB board. It's active high on RevA while active low on Rev B. Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: ls1021a: add nodes for PWMsPatrick Havelange1-0/+96
The LS1021A has 8 possible PWMs, so adding them (disabled by default) Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controllerAlex Gonzalez1-0/+19
The ConnectCore 6UL SBC Pro has an AUO/Goodix LCD accessory kit that is connected on the LVDS interface through an on-board LVDS transceiver. This change adds support for the touch interface. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panelAlex Gonzalez1-0/+18
This change adds support for the AUO G101EVN010 lcdif panel for the mxsfb DRM driver. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx25: Fix memory node duplicationFabio Estevam4-2/+3
Boards based on imx25 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx25.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx27: Fix memory node duplicationFabio Estevam6-2/+5
Boards based on imx27 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx27.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx1: Fix memory node duplicationFabio Estevam3-2/+2
Boards based on imx1 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx1.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx28: Fix memory node duplicationFabio Estevam18-2/+17
Boards based on imx28 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx28.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx23: Fix memory node duplicationFabio Estevam6-2/+5
Boards based on imx23 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx23.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6: Switch NXP board dts to SPDX identifierFabio Estevam6-108/+18
Adopt the SPDX license identifier headers to ease license compliance management. Most of the i.MX NXP reference board dts files have already been converted, so switch the remaining ones. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl-wandboard: Switch to SPDX identifierFabio Estevam3-30/+15
Adopt the SPDX license identifier headers to ease license compliance management. Most of the wandboard dts files have already been converted, so switch the remaining ones. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx50: Fix memory node duplicationFabio Estevam2-2/+1
imx50-evk has duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx50.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6sll-evk: use WDOG_B pin resetAnson Huang1-0/+12
i.MX6SLL EVK board has WDOG_B pin connected to the PMIC; Add the WDOG_B pinctrl entry and 'fsl,ext-reset-output' property to wdog node to let watchdog trigger a system POR reset via the PMIC. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6sll-evk: add debug LED supportAnson Huang1-0/+18
On i.MX6SLL EVK board, there is a debug LED controlled by MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 pin, add support for it. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl-sabreauto: Enable pcieLeonard Crestez1-0/+4
The imx6qdl-sabreauto boards have a pcie slot so let's enable it. Tested on imx6dl-sabreauto with an atk9k wifi card; scanning works. There are unhandled differences for imx6qp but imx6qp-sabreauto.dts already contains a snippet explicitly disabling the &pcie node so that can be dealt with later. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6sl: Fix memory node duplicationFabio Estevam4-2/+3
Boards based on imx6sl have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx6sl.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.