| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The previous commit introduced the use of CLONE_NEWTIME without including
<sched.h> which contains its definition.
Add an explicit include of <sched.h> to ensure that CLONE_NEWTIME
is correctly defined before it is used.
Fixes: 2aec90036dcd ("selftests: vDSO: ensure vgetrandom works in a time namespace")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Improve the error and skip condition messages to let the developer know
precisely where a test has failed. Also make better use of the ksft api
for this.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Rather than building on supported archs, build on all archs, and then
use the presence of the symbol in the vDSO to either skip the test or
move forward with it.
Note that this means that this test no longer checks whether the symbol
was correctly added to the kernel. But hopefully this will be clear
enough to developers and we'll cross our fingers that symbols aren't
removed by accident and not caught after this change.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Rather than using symlinks to find the vgetrandom-chacha.S file for each
arch, store this in a file that uses the compiler to determine
architecture, and then make use of weak symbols to skip the test on
architectures that don't provide the code.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
step_after_suspend_test fails with device busy error while
writing to /sys/power/state to start suspend. The test believes
it failed to enter suspend state with
$ sudo ./step_after_suspend_test
TAP version 13
Bail out! Failed to enter Suspend state
However, in the kernel message, I indeed see the system get
suspended and then wake up later.
[611172.033108] PM: suspend entry (s2idle)
[611172.044940] Filesystems sync: 0.006 seconds
[611172.052254] Freezing user space processes
[611172.059319] Freezing user space processes completed (elapsed 0.001 seconds)
[611172.067920] OOM killer disabled.
[611172.072465] Freezing remaining freezable tasks
[611172.080332] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[611172.089724] printk: Suspending console(s) (use no_console_suspend to debug)
[611172.117126] serial 00:03: disabled
some other hardware get reconnected
[611203.136277] OOM killer enabled.
[611203.140637] Restarting tasks ...
[611203.141135] usb 1-8.1: USB disconnect, device number 7
[611203.141755] done.
[611203.155268] random: crng reseeded on system resumption
[611203.162059] PM: suspend exit
After investigation, I noticed that for the code block
if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem"))
ksft_exit_fail_msg("Failed to enter Suspend state\n");
The write will return -1 and errno is set to 16 (device busy).
It should be caused by the write function is not successfully returned
before the system suspend and the return value get messed when waking up.
As a result, It may be better to check the time passed of those few
instructions to determine whether the suspend is executed correctly for
it is pretty hard to execute those few lines for 5 seconds.
The timer to wake up the system is set to expire after 5 seconds and
no re-arm. If the timer remaining time is 0 second and 0 nano secomd,
it means the timer expired and wake the system up. Otherwise, the system
could be considered to enter the suspend state failed if there is any
remaining time.
After appling this patch, the test would not fail for it believes the
system does not go to suspend by mistake. It now could continue to the
rest part of the test after suspend.
Fixes: bfd092b8c272 ("selftests: breakpoint: add step_after_suspend_test")
Reported-by: Sinadin Shan <sinadin.shan@oracle.com>
Signed-off-by: Yifei Liu <yifei.l.liu@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Insert raw strings to prevent Python3 from interpreting string literals
as Unicode strings and "\d" as invalid escaped sequence.
Fix the warnings:
tools/testing/selftests/devices/probe/test_discoverable_devices.py:48:
SyntaxWarning: invalid escape sequence '\d' usb_controller_sysfs_dir =
"usb[\d]+"
tools/testing/selftests/devices/probe/test_discoverable_devices.py: 94:
SyntaxWarning: invalid escape sequence '\d' re_usb_version =
re.compile("PRODUCT=.*/(\d)/.*")
Fixes: dacf1d7a78bf ("kselftest: Add test to verify probe of devices from discoverable buses")
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
HID test cases run tests using the run-hid-tools-tests.sh script.
When installed with "make install", the run-hid-tools-tests.sh
script will not be copied over, resulting in the following error message.
make -C tools/testing/selftests/ TARGETS=hid install \
INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c hid
selftests: hid: hid-core.sh
bash: ./run-hid-tools-tests.sh: No such file or directory
Add the run-hid-tools-tests.sh script to the TEST_FILES in the Makefile
for it to be installed.
Fixes: ffb85d5c9e80 ("selftests: hid: import hid-tools hid-core tests")
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This prevents false sharing, which makes a large difference on machines
with several NUMA nodes, such as on a dual socket Intel(R) Xeon(R) Gold
6338 CPU @ 2.00GHz, where the "bench-multi" test goes from 2.7s down to
1.9s. While this is just test code, it also forms the basis of how folks
will wind up implementing this in libraries, so we should implement this
simple cache alignment improvement here.
Suggested-by: Florian Weimer <fweimer@redhat.com>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The name of the "load_address" objects has been modified, but the
corresponding entry in the gitignore file must be updated.
Update the load_address entry in the gitignore file to account for
the new names, adding an exception to keep on tracking load_address.c.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This executable is missing from the corresponding gitignore file.
Add unshare_test to the core gitignore list.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The macro MAX_PID_NS_LEVEL is never referenced in the code, so remove it.
Signed-off-by: Ba Jing <bajing@cmss.chinamobile.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
__fatal_error routine doesn't check strerror_r() return value,
which results in the following compile time warning:
posix_timers.c: In function ‘__fatal_error’:
posix_timers.c:31:9: warning: ignoring return value of ‘strerror_r’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
31 | strerror_r(errno, buf, sizeof(buf));
Fix this by adding a check for return value and error handling appropriate
for the GNU-specific strerror_r() in use in __fatal_error(). Check if
return string is null and handle accordingly.
From Linux strerror_r() manual page:
"The GNU-specific strerror_r() returns a pointer to a string containing
the error message. This may be either a pointer to a string that the
function stores in buf, or a pointer to some (immutable) static string
(in which case buf is unused). If the function stores a string in buf,
then at most buflen bytes are stored (the string may be truncated if
buflen is too small and errnum is unknown). The string always includes
a terminating null byte."
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: John Stultz <jstultz@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The rtctest requires the read permission on /dev/rtc0. The rtctest will
be skipped if the /dev/rtc0 is not readable.
Reviewed-by: Koba Ko <kobak@nvidia.com>
Reviewed-by: Matthew R. Ochs <mochs@nvidia.com>
Signed-off-by: Joseph Jang <jjang@nvidia.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
|
|
The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:
#if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
...
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The isomorphism neg_if_exp negates the test of a ?: conditional,
making it unnecessary to have an explicit case for a negated test
with the branches inverted.
At the same time, we can disable neg_if_exp in cases where a
different API function may be more suitable for a negated test.
Finally, in the non-patch cases, E matches an expression with
parentheses around it, so there is no need to mention ()
explicitly in the pattern. The () are still needed in the patch
cases, because we want to drop them, if they are present.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
The parentheses are only needed if there is a disjunction, ie a
set of possible changes. If there is only one pattern, we can
remove these parentheses. Just like the format:
- x
+ y
not:
(
- x
+ y
)
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_yes_no()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_on_off()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_write_read()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_read_write()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_enable{d}_
disable{d}() to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_lo{w}_hi{gh}()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_hi{gh}_lo{w}()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As done with str_true_false(), add checks for str_false_true()
opportunities. A simple test can find over 9 cases currently
exist in the tree.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
After str_true_false() has been introduced in the tree,
we can add rules for finding places where str_true_false()
can be used. A simple test can find over 10 locations.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
if an inode backpointer points to a dirent that doesn't point back,
that's an error we should warn about.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If the reader acquires the read lock and then the writer enters the slow
path, while the reader proceeds to the unlock path, the following scenario
can occur without the change:
writer: pcpu_read_count(lock) return 1 (so __do_six_trylock will return 0)
reader: this_cpu_dec(*lock->readers)
reader: smp_mb()
reader: state = atomic_read(&lock->state) (there is no waiting flag set)
writer: six_set_bitmask()
then the writer will sleep forever.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If we shut down successfully, there shouldn't be any logged ops to
resume.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a filesystem flag to indicate whether we did a clean recovery -
using c->sb.clean after we've got rw is incorrect, since c->sb is
updated whenever we write the superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We had a bug where disk accounting keys didn't always have their version
field set in journal replay; change the BUG_ON() to a WARN(), and
exclude this case since it's now checked for elsewhere (in the bkey
validate function).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This was added to avoid double-counting accounting keys in journal
replay. But applied incorrectly (easily done since it applies to the
transaction commit, not a particular update), it leads to skipping
in-mem accounting for real accounting updates, and failure to give them
a version number - which leads to journal replay becoming very confused
the next time around.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
give bversions a more distinct name, to aid in grepping
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, check_inode() would delete unlinked inodes if they weren't
on the deleted list - this code dating from before there was a deleted
list.
But, if we crash during a logged op (truncate or finsert/fcollapse) of
an unlinked file, logged op resume will get confused if the inode has
already been deleted - instead, just add it to the deleted list if it
needs to be there; delete_dead_inodes runs after logged op resume.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
BCH_SB_ERRS() has a field for the actual enum val so that we can reorder
to reorganize, but the way BCH_SB_ERR_MAX was defined didn't allow for
this.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
__bch2_fsck_err() warns if the current task has a btree_trans object and
it wasn't passed in, because if it has to prompt for user input it has
to be able to unlock it.
But plumbing the btree_trans through bkey_validate(), as well as
transaction restarts, is problematic - so instead make bkey fsck errors
FSCK_AUTOFIX, which doesn't need to warn.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In order to check for accounting keys with version=0, we need to run
validation after they've been assigned version numbers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes the following bug, where a disk accounting key has an invalid
replicas entry, and we attempt to add it to the superblock:
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): starting version 1.12: rebalance_work_acct_fix opts=metadata_replicas=2,data_replicas=2,foreground_target=ssd,background_target=hdd,nopromote_whole_extents,verbose,fsck,fix_errors=yes
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): recovering from clean shutdown, journal seq 15211644
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): accounting_read...
accounting not marked in superblock replicas
replicas cached: 1/1 [0], fixing
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): sb invalid before write: Invalid superblock section replicas_v0: invalid device 0 in entry cached: 1/1 [0]
replicas_v0 (size 88):
user: 2 [3 5] user: 2 [1 4] cached: 1 [2] btree: 2 [1 2] user: 2 [2 5] cached: 1 [0] cached: 1 [4] journal: 2 [1 5] user: 2 [1 2] user: 2 [2 3] user: 2 [3 4] user: 2 [4 5] cached: 1 [1] cached: 1 [3] cached: 1 [5] journal: 2 [1 2] journal: 2 [2 5] btree: 2 [2 5] user: 2 [1 3] user: 2 [1 5] user: 2 [2 4]
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): inconsistency detected - emergency read only at journal seq 15211644
accounting not marked in superblock replicas
replicas user: 1/1 [3], fixing
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): sb invalid before write: Invalid superblock section replicas_v0: invalid device 0 in entry cached: 1/1 [0]
replicas_v0 (size 96):
user: 2 [3 5] user: 2 [1 3] cached: 1 [2] btree: 2 [1 2] user: 2 [2 4] cached: 1 [0] cached: 1 [4] journal: 2 [1 5] user: 1 [3] user: 2 [1 5] user: 2 [3 4] user: 2 [4 5] cached: 1 [1] cached: 1 [3] cached: 1 [5] journal: 2 [1 2] journal: 2 [2 5] btree: 2 [2 5] user: 2 [1 2] user: 2 [1 4] user: 2 [2 3] user: 2 [2 5]
accounting not marked in superblock replicas
replicas user: 1/2 [3 7], fixing
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): sb invalid before write: Invalid superblock section replicas_v0: invalid device 7 in entry user: 1/2 [3 7]
replicas_v0 (size 96):
user: 2 [3 7] user: 2 [1 3] cached: 1 [2] btree: 2 [1 2] user: 2 [2 4] cached: 1 [0] cached: 1 [4] journal: 2 [1 5] user: 1 [3] user: 2 [1 5] user: 2 [3 4] user: 2 [4 5] cached: 1 [1] cached: 1 [3] cached: 1 [5] journal: 2 [1 2] journal: 2 [2 5] btree: 2 [2 5] user: 2 [1 2] user: 2 [1 4] user: 2 [2 3] user: 2 [2 5] user: 2 [3 5]
done
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): alloc_read... done
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): stripes_read... done
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): snapshots_read... done
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
accounting read was checking if accounting replicas entries were marked
in the superblock prior to applying accounting from the journal,
which meant that a recently removed device could spuriously trigger a
"not marked in superblocked" error (when journal entries zero out the
offending counter).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Minor refactoring - replace multiple bool arguments with an enum; prep
work for fixing a bug in accounting read.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Dealing with outside state within a btree transaction is always tricky.
check_extents() and check_dirents() have to accumulate counters for
i_sectors and i_nlink (for subdirectories). There were two bugs:
- transaction commit may return a restart; therefore we have to commit
before accumulating to those counters
- get_inode_all_snapshots() may return a transaction restart, before
updating w->last_pos; then, on the restart,
check_i_sectors()/check_subdir_count() would see inodes that were not
for w->last_pos
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
dead code
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Returning a positive integer instead of an error code causes error paths
to become very confused.
Closes: syzbot+c0360e8367d6d8d04a66@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The pointer clean points the memory allocated by kmemdup, when the
return value of bch2_sb_clean_validate_late is not zero. The memory
pointed by clean is leaked. So we should free it in this case.
Fixes: a37ad1a3aba9 ("bcachefs: sb-clean.c")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In downgrade_table_extra, the return value is needed. When it
return failed, we should exit immediately.
Fixes: 7773df19c35f ("bcachefs: metadata version bucket_stripe_sectors")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
A couple small error handling fixes
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
Yu Liao
Jason A. Donenfeld
Yifei Liu
Alessandro Zanni
Yun Lu
Javier Carrasco
Ba Jing
Shuah Khan
Joseph Jang
Linus Torvalds
Julia Lawall
Hongbo Li
Kent Overstreet
Alan Huang