aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2023-10-06ravb: Fix up dma_free_coherent() call in ravb_remove()Yoshihiro Shimoda1-2/+2
In ravb_remove(), dma_free_coherent() should be call after unregister_netdev(). Otherwise, this controller is possible to use the freed buffer. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20231005011201.14368-2-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-06devlink: Hold devlink lock on health reporter dump getMoshe Shemesh1-14/+16
Devlink health dump get callback should take devlink lock as any other devlink callback. Otherwise, since devlink_mutex was removed, this callback is not protected from a race of the reporter being destroyed while handling the callback. Add devlink lock to the callback and to any call for devlink_health_do_dump(). This should be safe as non of the drivers dump callback implementation takes devlink lock. As devlink lock is added to any callback of dump, the reporter dump_lock is now redundant and can be removed. Fixes: d3efc2a6a6d8 ("net: devlink: remove devlink_mutex") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/1696510216-189379-1-git-send-email-moshe@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-06net: sched: cls_u32: Fix allocation size in u32_init()Gustavo A. R. Silva1-1/+1
commit d61491a51f7e ("net/sched: cls_u32: Replace one-element array with flexible-array member") incorrecly replaced an instance of `sizeof(*tp_c)` with `struct_size(tp_c, hlist->ht, 1)`. This results in a an over-allocation of 8 bytes. This change is wrong because `hlist` in `struct tc_u_common` is a pointer: net/sched/cls_u32.c: struct tc_u_common { struct tc_u_hnode __rcu *hlist; void *ptr; int refcnt; struct idr handle_idr; struct hlist_node hnode; long knodes; }; So, the use of `struct_size()` makes no sense: we don't need to allocate any extra space for a flexible-array member. `sizeof(*tp_c)` is just fine. So, `struct_size(tp_c, hlist->ht, 1)` translates to: sizeof(*tp_c) + sizeof(tp_c->hlist->ht) == sizeof(struct tc_u_common) + sizeof(struct tc_u_knode *) == 144 + 8 == 0x98 (byes) ^^^ | unnecessary extra allocation size $ pahole -C tc_u_common net/sched/cls_u32.o struct tc_u_common { struct tc_u_hnode * hlist; /* 0 8 */ void * ptr; /* 8 8 */ int refcnt; /* 16 4 */ /* XXX 4 bytes hole, try to pack */ struct idr handle_idr; /* 24 96 */ /* --- cacheline 1 boundary (64 bytes) was 56 bytes ago --- */ struct hlist_node hnode; /* 120 16 */ /* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */ long int knodes; /* 136 8 */ /* size: 144, cachelines: 3, members: 6 */ /* sum members: 140, holes: 1, sum holes: 4 */ /* last cacheline: 16 bytes */ }; And with `sizeof(*tp_c)`, we have: sizeof(*tp_c) == sizeof(struct tc_u_common) == 144 == 0x90 (bytes) which is the correct and original allocation size. Fix this issue by replacing `struct_size(tp_c, hlist->ht, 1)` with `sizeof(*tp_c)`, and avoid allocating 8 too many bytes. The following difference in binary output is expected and reflects the desired change: | net/sched/cls_u32.o | @@ -6148,7 +6148,7 @@ | include/linux/slab.h:599 | 2cf5: mov 0x0(%rip),%rdi # 2cfc <u32_init+0xfc> | 2cf8: R_X86_64_PC32 kmalloc_caches+0xc |- 2cfc: mov $0x98,%edx |+ 2cfc: mov $0x90,%edx Reported-by: Alejandro Colomar <alx@kernel.org> Closes: https://lore.kernel.org/lkml/09b4a2ce-da74-3a19-6961-67883f634d98@kernel.org/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-06net: dsa: qca8k: fix potential MDIO bus conflict when accessing internal PHYs via management framesMarek Behún1-0/+11
Besides the QCA8337 switch the Turris 1.x device has on it's MDIO bus also Micron ethernet PHY (dedicated to the WAN port). We've been experiencing a strange behavior of the WAN ethernet interface, wherein the WAN PHY started timing out the MDIO accesses, for example when the interface was brought down and then back up. Bisecting led to commit 2cd548566384 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet"), which added support to access the QCA8337 switch's internal PHYs via management ethernet frames. Connecting the MDIO bus pins onto an oscilloscope, I was able to see that the MDIO bus was active whenever a request to read/write an internal PHY register was done via an management ethernet frame. My theory is that when the switch core always communicates with the internal PHYs via the MDIO bus, even when externally we request the access via ethernet. This MDIO bus is the same one via which the switch and internal PHYs are accessible to the board, and the board may have other devices connected on this bus. An ASCII illustration may give more insight: +---------+ +----| | | | WAN PHY | | +--| | | | +---------+ | | | | +----------------------------------+ | | | QCA8337 | MDC | | | +-------+ | ------o-+--|--------o------------o--| | | MDIO | | | | | PHY 1 |-|--to RJ45 --------o--|---o----+---------o--+--| | | | | | | | +-------+ | | +-------------+ | o--| | | | | MDIO MDC | | | | PHY 2 |-|--to RJ45 eth1 | | | o--+--| | | -----------|-|port0 | | | +-------+ | | | | | o--| | | | | switch core | | | | PHY 3 |-|--to RJ45 | +-------------+ o--+--| | | | | | +-------+ | | | o--| ... | | +----------------------------------+ When we send a request to read an internal PHY register via an ethernet management frame via eth1, the switch core receives the ethernet frame on port 0 and then communicates with the internal PHY via MDIO. At this time, other potential devices, such as the WAN PHY on Turris 1.x, cannot use the MDIO bus, since it may cause a bus conflict. Fix this issue by locking the MDIO bus even when we are accessing the PHY registers via ethernet management frames. Fixes: 2cd548566384 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-06net: dsa: qca8k: fix regmap bulk read/write methods on big endian systemsMarek Behún1-2/+2
Commit c766e077d927 ("net: dsa: qca8k: convert to regmap read/write API") introduced bulk read/write methods to qca8k's regmap. The regmap bulk read/write methods get the register address in a buffer passed as a void pointer parameter (the same buffer contains also the read/written values). The register address occupies only as many bytes as it requires at the beginning of this buffer. For example if the .reg_bits member in regmap_config is 16 (as is the case for this driver), the register address occupies only the first 2 bytes in this buffer, so it can be cast to u16. But the original commit implementing these bulk read/write methods cast the buffer to u32: u32 reg = *(u32 *)reg_buf & U16_MAX; taking the first 4 bytes. This works on little endian systems where the first 2 bytes of the buffer correspond to the low 16-bits, but it obviously cannot work on big endian systems. Fix this by casting the beginning of the buffer to u16 as u32 reg = *(u16 *)reg_buf; Fixes: c766e077d927 ("net: dsa: qca8k: convert to regmap read/write API") Signed-off-by: Marek Behún <kabel@kernel.org> Tested-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-06phy: lynx-28g: serialize concurrent phy_set_mode_ext() calls to shared registersVladimir Oltean1-0/+9
The protocol converter configuration registers PCC8, PCCC, PCCD (implemented by the driver), as well as others, control protocol converters from multiple lanes (each represented as a different struct phy). So, if there are simultaneous calls to phy_set_mode_ext() to lanes sharing the same PCC register (either for the "old" or for the "new" protocol), corruption of the values programmed to hardware is possible, because lynx_28g_rmw() has no locking. Add a spinlock in the struct lynx_28g_priv shared by all lanes, and take the global spinlock from the phy_ops :: set_mode() implementation. There are no other callers which modify PCC registers. Fixes: 8f73b37cf3fb ("phy: add support for the Layerscape SerDes 28G") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-06phy: lynx-28g: lock PHY while performing CDR lock workaroundVladimir Oltean1-3/+6
lynx_28g_cdr_lock_check() runs once per second in a workqueue to reset the lane receiver if the CDR has not locked onto bit transitions in the RX stream. But the PHY consumer may do stuff with the PHY simultaneously, and that isn't okay. Block concurrent generic PHY calls by holding the PHY mutex from this workqueue. Fixes: 8f73b37cf3fb ("phy: add support for the Layerscape SerDes 28G") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-06phy: lynx-28g: cancel the CDR check work item on the remove pathIoana Ciornei1-0/+9
The blamed commit added the CDR check work item but didn't cancel it on the remove path. Fix this by adding a remove function which takes care of it. Fixes: 8f73b37cf3fb ("phy: add support for the Layerscape SerDes 28G") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-05MAINTAINERS: update Matthieu's email addressMatthieu Baerts2-1/+2
Use my kernel.org account instead. The other one will bounce by the end of the year. Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231004-send-net-20231004-v1-3-28de4ac663ae@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05mptcp: userspace pm allow creating id 0 subflowGeliang Tang1-6/+0
This patch drops id 0 limitation in mptcp_nl_cmd_sf_create() to allow creating additional subflows with the local addr ID 0. There is no reason not to allow additional subflows from this local address: we should be able to create new subflows from the initial endpoint. This limitation was breaking fullmesh support from userspace. Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/391 Cc: stable@vger.kernel.org Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231004-send-net-20231004-v1-2-28de4ac663ae@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05mptcp: fix delegated action racesPaolo Abeni3-39/+34
The delegated action infrastructure is prone to the following race: different CPUs can try to schedule different delegated actions on the same subflow at the same time. Each of them will check different bits via mptcp_subflow_delegate(), and will try to schedule the action on the related per-cpu napi instance. Depending on the timing, both can observe an empty delegated list node, causing the same entry to be added simultaneously on two different lists. The root cause is that the delegated actions infra does not provide a single synchronization point. Address the issue reserving an additional bit to mark the subflow as scheduled for delegation. Acquiring such bit guarantee the caller to own the delegated list node, and being able to safely schedule the subflow. Clear such bit only when the subflow scheduling is completed, ensuring proper barrier in place. Additionally swap the meaning of the delegated_action bitmask, to allow the usage of the existing helper to set multiple bit at once. Fixes: bcd97734318d ("mptcp: use delegate action to schedule 3rd ack retrans") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231004-send-net-20231004-v1-1-28de4ac663ae@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05net: stmmac: remove unneeded stmmac_poll_controllerRemi Pommarel1-30/+0
Using netconsole netpoll_poll_dev could be called from interrupt context, thus using disable_irq() would cause the following kernel warning with CONFIG_DEBUG_ATOMIC_SLEEP enabled: BUG: sleeping function called from invalid context at kernel/irq/manage.c:137 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 10, name: ksoftirqd/0 CPU: 0 PID: 10 Comm: ksoftirqd/0 Tainted: G W 5.15.42-00075-g816b502b2298-dirty #117 Hardware name: aml (r1) (DT) Call trace: dump_backtrace+0x0/0x270 show_stack+0x14/0x20 dump_stack_lvl+0x8c/0xac dump_stack+0x18/0x30 ___might_sleep+0x150/0x194 __might_sleep+0x64/0xbc synchronize_irq+0x8c/0x150 disable_irq+0x2c/0x40 stmmac_poll_controller+0x140/0x1a0 netpoll_poll_dev+0x6c/0x220 netpoll_send_skb+0x308/0x390 netpoll_send_udp+0x418/0x760 write_msg+0x118/0x140 [netconsole] console_unlock+0x404/0x500 vprintk_emit+0x118/0x250 dev_vprintk_emit+0x19c/0x1cc dev_printk_emit+0x90/0xa8 __dev_printk+0x78/0x9c _dev_warn+0xa4/0xbc ath10k_warn+0xe8/0xf0 [ath10k_core] ath10k_htt_txrx_compl_task+0x790/0x7fc [ath10k_core] ath10k_pci_napi_poll+0x98/0x1f4 [ath10k_pci] __napi_poll+0x58/0x1f4 net_rx_action+0x504/0x590 _stext+0x1b8/0x418 run_ksoftirqd+0x74/0xa4 smpboot_thread_fn+0x210/0x3c0 kthread+0x1fc/0x210 ret_from_fork+0x10/0x20 Since [0] .ndo_poll_controller is only needed if driver doesn't or partially use NAPI. Because stmmac does so, stmmac_poll_controller can be removed fixing the above warning. [0] commit ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional") Cc: <stable@vger.kernel.org> # 5.15.x Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/1c156a6d8c9170bd6a17825f2277115525b4d50f.1696429960.git.repk@triplefau.lt Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05net: lan743x: also select PHYLIBRandy Dunlap1-0/+1
Since FIXED_PHY depends on PHYLIB, PHYLIB needs to be set to avoid a kconfig warning: WARNING: unmet direct dependencies detected for FIXED_PHY Depends on [n]: NETDEVICES [=y] && PHYLIB [=n] Selected by [y]: - LAN743X [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && PCI [=y] && PTP_1588_CLOCK_OPTIONAL [=y] Fixes: 73c4d1b307ae ("net: lan743x: select FIXED_PHY") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Closes: lore.kernel.org/r/202309261802.JPbRHwti-lkp@intel.com Cc: Bryan Whitehead <bryan.whitehead@microchip.com> Cc: UNGLinuxDriver@microchip.com Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Link: https://lore.kernel.org/r/20231002193544.14529-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05net: ethernet: mediatek: disable irq before schedule napiChristian Marangi1-2/+2
While searching for possible refactor of napi_schedule_prep and __napi_schedule it was notice that the mtk eth driver disable the interrupt for rx and tx AFTER napi is scheduled. While this is a very hard to repro case it might happen to have situation where the interrupt is disabled and never enabled again as the napi completes and the interrupt is enabled before. This is caused by the fact that a napi driven by interrupt expect a logic with: 1. interrupt received. napi prepared -> interrupt disabled -> napi scheduled 2. napi triggered. ring cleared -> interrupt enabled -> wait for new interrupt To prevent this case, disable the interrupt BEFORE the napi is scheduled. Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet") Cc: stable@vger.kernel.org Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20231002140805.568-1-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05net: mana: Fix oversized sge0 for GSO packetsHaiyang Zhang2-58/+138
Handle the case when GSO SKB linear length is too large. MANA NIC requires GSO packets to put only the header part to SGE0, otherwise the TX queue may stop at the HW level. So, use 2 SGEs for the skb linear part which contains more than the packet header. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05net: mana: Fix the tso_bytes calculationHaiyang Zhang1-2/+0
sizeof(struct hop_jumbo_hdr) is not part of tso_bytes, so remove the subtraction from header size. Cc: stable@vger.kernel.org Fixes: bd7fc6e1957c ("net: mana: Add new MANA VF performance counters for easier troubleshooting") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-05net: mana: Fix TX CQE error handlingHaiyang Zhang1-7/+11
For an unknown TX CQE error type (probably from a newer hardware), still free the SKB, update the queue tail, etc., otherwise the accounting will be wrong. Also, TX errors can be triggered by injecting corrupted packets, so replace the WARN_ONCE to ratelimited error logging. Cc: stable@vger.kernel.org Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-04netlink: annotate data-races around sk->sk_errEric Dumazet1-4/+4
syzbot caught another data-race in netlink when setting sk->sk_err. Annotate all of them for good measure. BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg write to 0xffff8881613bb220 of 4 bytes by task 28147 on cpu 0: netlink_recvmsg+0x448/0x780 net/netlink/af_netlink.c:1994 sock_recvmsg_nosec net/socket.c:1027 [inline] sock_recvmsg net/socket.c:1049 [inline] __sys_recvfrom+0x1f4/0x2e0 net/socket.c:2229 __do_sys_recvfrom net/socket.c:2247 [inline] __se_sys_recvfrom net/socket.c:2243 [inline] __x64_sys_recvfrom+0x78/0x90 net/socket.c:2243 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd write to 0xffff8881613bb220 of 4 bytes by task 28146 on cpu 1: netlink_recvmsg+0x448/0x780 net/netlink/af_netlink.c:1994 sock_recvmsg_nosec net/socket.c:1027 [inline] sock_recvmsg net/socket.c:1049 [inline] __sys_recvfrom+0x1f4/0x2e0 net/socket.c:2229 __do_sys_recvfrom net/socket.c:2247 [inline] __se_sys_recvfrom net/socket.c:2243 [inline] __x64_sys_recvfrom+0x78/0x90 net/socket.c:2243 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00000000 -> 0x00000016 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 28146 Comm: syz-executor.0 Not tainted 6.6.0-rc3-syzkaller-00055-g9ed22ae6be81 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/06/2023 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231003183455.3410550-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04sctp: update hb timer immediately after users change hb_intervalXin Long1-0/+1
Currently, when hb_interval is changed by users, it won't take effect until the next expiry of hb timer. As the default value is 30s, users have to wait up to 30s to wait its hb_interval update to work. This becomes pretty bad in containers where a much smaller value is usually set on hb_interval. This patch improves it by resetting the hb timer immediately once the value of hb_interval is updated by users. Note that we don't address the already existing 'problem' when sending a heartbeat 'on demand' if one hb has just been sent(from the timer) mentioned in: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg590224.html Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/75465785f8ee5df2fb3acdca9b8fafdc18984098.1696172660.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04sctp: update transport state when processing a dupcook packetXin Long1-2/+1
During the 4-way handshake, the transport's state is set to ACTIVE in sctp_process_init() when processing INIT_ACK chunk on client or COOKIE_ECHO chunk on server. In the collision scenario below: 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] 192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] when processing COOKIE_ECHO on 192.168.1.2, as it's in COOKIE_WAIT state, sctp_sf_do_dupcook_b() is called by sctp_sf_do_5_2_4_dupcook() where it creates a new association and sets its transport to ACTIVE then updates to the old association in sctp_assoc_update(). However, in sctp_assoc_update(), it will skip the transport update if it finds a transport with the same ipaddr already existing in the old asoc, and this causes the old asoc's transport state not to move to ACTIVE after the handshake. This means if DATA retransmission happens at this moment, it won't be able to enter PF state because of the check 'transport->state == SCTP_ACTIVE' in sctp_do_8_2_transport_strike(). This patch fixes it by updating the transport in sctp_assoc_update() with sctp_assoc_add_peer() where it updates the transport state if there is already a transport with the same ipaddr exists in the old asoc. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/fd17356abe49713ded425250cc1ae51e9f5846c6.1696172325.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04tcp: fix delayed ACKs for MSS boundary conditionNeal Cardwell1-0/+13
This commit fixes poor delayed ACK behavior that can cause poor TCP latency in a particular boundary condition: when an application makes a TCP socket write that is an exact multiple of the MSS size. The problem is that there is painful boundary discontinuity in the current delayed ACK behavior. With the current delayed ACK behavior, we have: (1) If an app reads data when > 1*MSS is unacknowledged, then tcp_cleanup_rbuf() ACKs immediately because of: tp->rcv_nxt - tp->rcv_wup > icsk->icsk_ack.rcv_mss || (2) If an app reads all received data, and the packets were < 1*MSS, and either (a) the app is not ping-pong or (b) we received two packets < 1*MSS, then tcp_cleanup_rbuf() ACKs immediately beecause of: ((icsk->icsk_ack.pending & ICSK_ACK_PUSHED2) || ((icsk->icsk_ack.pending & ICSK_ACK_PUSHED) && !inet_csk_in_pingpong_mode(sk))) && (3) *However*: if an app reads exactly 1*MSS of data, tcp_cleanup_rbuf() does not send an immediate ACK. This is true even if the app is not ping-pong and the 1*MSS of data had the PSH bit set, suggesting the sending application completed an application write. Thus if the app is not ping-pong, we have this painful case where >1*MSS gets an immediate ACK, and <1*MSS gets an immediate ACK, but a write whose last skb is an exact multiple of 1*MSS can get a 40ms delayed ACK. This means that any app that transfers data in one direction and takes care to align write size or packet size with MSS can suffer this problem. With receive zero copy making 4KB MSS values more common, it is becoming more common to have application writes naturally align with MSS, and more applications are likely to encounter this delayed ACK problem. The fix in this commit is to refine the delayed ACK heuristics with a simple check: immediately ACK a received 1*MSS skb with PSH bit set if the app reads all data. Why? If an skb has a len of exactly 1*MSS and has the PSH bit set then it is likely the end of an application write. So more data may not be arriving soon, and yet the data sender may be waiting for an ACK if cwnd-bound or using TX zero copy. Thus we set ICSK_ACK_PUSHED in this case so that tcp_cleanup_rbuf() will send an ACK immediately if the app reads all of the data and is not ping-pong. Note that this logic is also executed for the case where len > MSS, but in that case this logic does not matter (and does not hurt) because tcp_cleanup_rbuf() will always ACK immediately if the app reads data and there is more than an MSS of unACKed data. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Xin Guo <guoxin0309@gmail.com> Link: https://lore.kernel.org/r/20231001151239.1866845-2-ncardwell.sw@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04tcp: fix quick-ack counting to count actual ACKs of new dataNeal Cardwell2-6/+7
This commit fixes quick-ack counting so that it only considers that a quick-ack has been provided if we are sending an ACK that newly acknowledges data. The code was erroneously using the number of data segments in outgoing skbs when deciding how many quick-ack credits to remove. This logic does not make sense, and could cause poor performance in request-response workloads, like RPC traffic, where requests or responses can be multi-segment skbs. When a TCP connection decides to send N quick-acks, that is to accelerate the cwnd growth of the congestion control module controlling the remote endpoint of the TCP connection. That quick-ack decision is purely about the incoming data and outgoing ACKs. It has nothing to do with the outgoing data or the size of outgoing data. And in particular, an ACK only serves the intended purpose of allowing the remote congestion control to grow the congestion window quickly if the ACK is ACKing or SACKing new data. The fix is simple: only count packets as serving the goal of the quickack mechanism if they are ACKing/SACKing new data. We can tell whether this is the case by checking inet_csk_ack_scheduled(), since we schedule an ACK exactly when we are ACKing/SACKing new data. Fixes: fc6415bcb0f5 ("[TCP]: Fix quick-ack decrementing with TSO.") Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20231001151239.1866845-1-ncardwell.sw@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04page_pool: fix documentation typosRandy Dunlap1-3/+3
Correct grammar for better readability. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Link: https://lore.kernel.org/r/20231001003846.29541-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04tipc: fix a potential deadlock on &tx->lockChengfeng Ye1-2/+2
It seems that tipc_crypto_key_revoke() could be be invoked by wokequeue tipc_crypto_work_rx() under process context and timer/rx callback under softirq context, thus the lock acquisition on &tx->lock seems better use spin_lock_bh() to prevent possible deadlock. This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. tipc_crypto_work_rx() <workqueue> --> tipc_crypto_key_distr() --> tipc_bcast_xmit() --> tipc_bcbase_xmit() --> tipc_bearer_bc_xmit() --> tipc_crypto_xmit() --> tipc_ehdr_build() --> tipc_crypto_key_revoke() --> spin_lock(&tx->lock) <timer interrupt> --> tipc_disc_timeout() --> tipc_bearer_xmit_skb() --> tipc_crypto_xmit() --> tipc_ehdr_build() --> tipc_crypto_key_revoke() --> spin_lock(&tx->lock) <deadlock here> Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication") Link: https://lore.kernel.org/r/20230927181414.59928-1-dg573847474@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04net: stmmac: dwmac-stm32: fix resume on STM32 MCUBen Wolsieffer1-2/+5
The STM32MP1 keeps clk_rx enabled during suspend, and therefore the driver does not enable the clock in stm32_dwmac_init() if the device was suspended. The problem is that this same code runs on STM32 MCUs, which do disable clk_rx during suspend, causing the clock to never be re-enabled on resume. This patch adds a variant flag to indicate that clk_rx remains enabled during suspend, and uses this to decide whether to enable the clock in stm32_dwmac_init() if the device was suspended. This approach fixes this specific bug with limited opportunity for unintended side-effects, but I have a follow up patch that will refactor the clock configuration and hopefully make it less error prone. Fixes: 6528e02cc9ff ("net: ethernet: stmmac: add adaptation for stm32mp157c.") Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230927175749.1419774-1-ben.wolsieffer@hefring.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04ipv4: Set offload_failed flag in fibmatch resultsBenjamin Poirier1-0/+2
Due to a small omission, the offload_failed flag is missing from ipv4 fibmatch results. Make sure it is set correctly. The issue can be witnessed using the following commands: echo "1 1" > /sys/bus/netdevsim/new_device ip link add dummy1 up type dummy ip route add 192.0.2.0/24 dev dummy1 echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/fib/fail_route_offload ip route add 198.51.100.0/24 dev dummy1 ip route # 192.168.15.0/24 has rt_trap # 198.51.100.0/24 has rt_offload_failed ip route get 192.168.15.1 fibmatch # Result has rt_trap ip route get 198.51.100.1 fibmatch # Result differs from the route shown by `ip route`, it is missing # rt_offload_failed ip link del dev dummy1 echo 1 > /sys/bus/netdevsim/del_device Fixes: 36c5100e859d ("IPv4: Add "offload failed" indication to routes") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230926182730.231208-1-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-04netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failureFlorian Westphal1-17/+29
nft_rbtree_gc_elem() walks back and removes the end interval element that comes before the expired element. There is a small chance that we've cached this element as 'rbe_ge'. If this happens, we hold and test a pointer that has been queued for freeing. It also causes spurious insertion failures: $ cat test-testcases-sets-0044interval_overlap_0.1/testout.log Error: Could not process rule: File exists add element t s { 0 - 2 } ^^^^^^ Failed to insert 0 - 2 given: table ip t { set s { type inet_service flags interval,timeout timeout 2s gc-interval 2s } } The set (rbtree) is empty. The 'failure' doesn't happen on next attempt. Reason is that when we try to insert, the tree may hold an expired element that collides with the range we're adding. While we do evict/erase this element, we can trip over this check: if (rbe_ge && nft_rbtree_interval_end(rbe_ge) && nft_rbtree_interval_end(new)) return -ENOTEMPTY; rbe_ge was erased by the synchronous gc, we should not have done this check. Next attempt won't find it, so retry results in successful insertion. Restart in-kernel to avoid such spurious errors. Such restart are rare, unless userspace intentionally adds very large numbers of elements with very short timeouts while setting a huge gc interval. Even in this case, this cannot loop forever, on each retry an existing element has been removed. As the caller is holding the transaction mutex, its impossible for a second entity to add more expiring elements to the tree. After this it also becomes feasible to remove the async gc worker and perform all garbage collection from the commit path. Fixes: c9e6978e2725 ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection") Signed-off-by: Florian Westphal <fw@strlen.de>
2023-10-04netfilter: nf_tables: Deduplicate nft_register_obj audit logsPhil Sutter2-16/+48
When adding/updating an object, the transaction handler emits suitable audit log entries already, the one in nft_obj_notify() is redundant. To fix that (and retain the audit logging from objects' 'update' callback), Introduce an "audit log free" variant for internal use. Fixes: c520292f29b8 ("audit: log nftables configuration change events once per table") Signed-off-by: Phil Sutter <phil@nwl.cc> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> (Audit) Signed-off-by: Florian Westphal <fw@strlen.de>
2023-10-04selftests: netfilter: Extend nft_audit.shPhil Sutter1-16/+81
Add tests for sets and elements and deletion of all kinds. Also reorder rule reset tests: By moving the bulk rule add command up, the two 'reset rules' tests become identical. While at it, fix for a failing bulk rule add test's error status getting lost due to its use in a pipe. Avoid this by using a temporary file. Headings in diff output for failing tests contain no useful data, strip them. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-10-04selftests: netfilter: test for sctp collision processing in nf_conntrackXin Long3-2/+191
This patch adds a test case to reproduce the SCTP DATA chunk retransmission timeout issue caused by the improper SCTP collision processing in netfilter nf_conntrack_proto_sctp. In this test, client sends a INIT chunk, but the INIT_ACK replied from server is delayed until the server sends a INIT chunk to start a new connection from its side. After the connection is complete from server side, the delayed INIT_ACK arrives in nf_conntrack_proto_sctp. The delayed INIT_ACK should be dropped in nf_conntrack_proto_sctp instead of updating the vtag with the out-of-date init_tag, otherwise, the vtag in DATA chunks later sent by client don't match the vtag in the conntrack entry and the DATA chunks get dropped. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-10-04netfilter: handle the connecting collision properly in nf_conntrack_proto_sctpXin Long2-10/+34
In Scenario A and B below, as the delayed INIT_ACK always changes the peer vtag, SCTP ct with the incorrect vtag may cause packet loss. Scenario A: INIT_ACK is delayed until the peer receives its own INIT_ACK 192.168.1.2 > 192.168.1.1: [INIT] [init tag: 1328086772] 192.168.1.1 > 192.168.1.2: [INIT] [init tag: 1414468151] 192.168.1.2 > 192.168.1.1: [INIT ACK] [init tag: 1328086772] 192.168.1.1 > 192.168.1.2: [INIT ACK] [init tag: 1650211246] * 192.168.1.2 > 192.168.1.1: [COOKIE ECHO] 192.168.1.1 > 192.168.1.2: [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: [COOKIE ACK] Scenario B: INIT_ACK is delayed until the peer completes its own handshake 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] 192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] * This patch fixes it as below: In SCTP_CID_INIT processing: - clear ct->proto.sctp.init[!dir] if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir]. (Scenario E) - set ct->proto.sctp.init[dir]. In SCTP_CID_INIT_ACK processing: - drop it if !ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] && ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario B, Scenario C) - drop it if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario A) In SCTP_CID_COOKIE_ACK processing: - clear ct->proto.sctp.init[dir] and ct->proto.sctp.init[!dir]. (Scenario D) Also, it's important to allow the ct state to move forward with cookie_echo and cookie_ack from the opposite dir for the collision scenarios. There are also other Scenarios where it should allow the packet through, addressed by the processing above: Scenario C: new CT is created by INIT_ACK. Scenario D: start INIT on the existing ESTABLISHED ct. Scenario E: start INIT after the old collision on the existing ESTABLISHED ct. 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] (both side are stopped, then start new connection again in hours) 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 242308742] Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-10-04netfilter: nft_payload: rebuild vlan header on h_proto accessFlorian Westphal1-1/+12
nft can perform merging of adjacent payload requests. This means that: ether saddr 00:11 ... ether type 8021ad ... is a single payload expression, for 8 bytes, starting at the ethernet source offset. Check that offset+length is fully within the source/destination mac addersses. This bug prevents 'ether type' from matching the correct h_proto in case vlan tag got stripped. Fixes: de6843be3082 ("netfilter: nft_payload: rebuild vlan header when needed") Reported-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-10-04ibmveth: Remove condition to recompute TCP header checksum.David Wilder1-13/+12
In some OVS environments the TCP pseudo header checksum may need to be recomputed. Currently this is only done when the interface instance is configured for "Trunk Mode". We found the issue also occurs in some Kubernetes environments, these environments do not use "Trunk Mode", therefor the condition is removed. Performance tests with this change show only a fractional decrease in throughput (< 0.2%). Fixes: 7525de2516fb ("ibmveth: Set CHECKSUM_PARTIAL if NULL TCP CSUM.") Signed-off-by: David Wilder <dwilder@us.ibm.com> Reviewed-by: Nick Child <nnac123@linux.ibm.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-04dmaengine: ti: k3-udma-glue: clean up k3_udma_glue_tx_get_irq() returnDan Carpenter3-5/+6
The k3_udma_glue_tx_get_irq() function currently returns negative error codes on error, zero on error and positive values for success. This complicates life for the callers who need to propagate the error code. Also GCC will not warn about unsigned comparisons when you check: if (unsigned_irq <= 0) All the callers have been fixed now but let's just make this easy going forward. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-04net: ti: icssg-prueth: Fix signedness bug in prueth_init_tx_chns()Dan Carpenter1-3/+5
The "tx_chn->irq" variable is unsigned so the error checking does not work correctly. Fixes: 128d5874c082 ("net: ti: icssg-prueth: Add ICSSG ethernet driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-04net: ethernet: ti: am65-cpsw: Fix error code in am65_cpsw_nuss_init_tx_chns()Dan Carpenter1-0/+1
This accidentally returns success, but it should return a negative error code. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-04vringh: don't use vringh_kiov_advance() in vringh_iov_xfer()Stefano Garzarella1-1/+11
In the while loop of vringh_iov_xfer(), `partlen` could be 0 if one of the `iov` has 0 lenght. In this case, we should skip the iov and go to the next one. But calling vringh_kiov_advance() with 0 lenght does not cause the advancement, since it returns immediately if asked to advance by 0 bytes. Let's restore the code that was there before commit b8c06ad4d67d ("vringh: implement vringh_kiov_advance()"), avoiding using vringh_kiov_advance(). Fixes: b8c06ad4d67d ("vringh: implement vringh_kiov_advance()") Cc: stable@vger.kernel.org Reported-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-03rswitch: Fix PHY station management clock settingYoshihiro Shimoda2-1/+14
Fix the MPIC.PSMCS value following the programming example in the section 6.4.2 Management Data Clock (MDC) Setting, Ethernet MAC IP, S4 Hardware User Manual Rev.1.00. The value is calculated by MPIC.PSMCS = clk[MHz] / (MDC frequency[MHz] * 2) - 1 with the input clock frequency from clk_get_rate() and MDC frequency of 2.5MHz. Otherwise, this driver cannot communicate PHYs on the R-Car S4 Starter Kit board. Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Reported-by: Tam Nguyen <tam.nguyen.xa@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230926123054.3976752-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-03net: nfc: llcp: Add lock when modifying device listJeremy Cline1-0/+2
The device list needs its associated lock held when modifying it, or the list could become corrupted, as syzbot discovered. Reported-and-tested-by: syzbot+c1d0a03d305972dbbe14@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c1d0a03d305972dbbe14 Signed-off-by: Jeremy Cline <jeremy@jcline.org> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 6709d4b7bc2e ("net: nfc: Fix use-after-free caused by nfc_llcp_find_local") Link: https://lore.kernel.org/r/20230908235853.1319596-1-jeremy@jcline.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-03ethtool: plca: fix plca enable data type while parsing the valueParthiban Veerasooran1-16/+29
The ETHTOOL_A_PLCA_ENABLED data type is u8. But while parsing the value from the attribute, nla_get_u32() is used in the plca_update_sint() function instead of nla_get_u8(). So plca_cfg.enabled variable is updated with some garbage value instead of 0 or 1 and always enables plca even though plca is disabled through ethtool application. This bug has been fixed by parsing the values based on the attributes type in the policy. Fixes: 8580e16c28f3 ("net/ethtool: add netlink interface for the PLCA RS") Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230908044548.5878-1-Parthiban.Veerasooran@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-03qed/red_ll2: Fix undefined behavior bug in struct qed_ll2_infoGustavo A. R. Silva1-1/+1
The flexible structure (a structure that contains a flexible-array member at the end) `qed_ll2_tx_packet` is nested within the second layer of `struct qed_ll2_info`: struct qed_ll2_tx_packet { ... /* Flexible Array of bds_set determined by max_bds_per_packet */ struct { struct core_tx_bd *txq_bd; dma_addr_t tx_frag; u16 frag_len; } bds_set[]; }; struct qed_ll2_tx_queue { ... struct qed_ll2_tx_packet cur_completing_packet; }; struct qed_ll2_info { ... struct qed_ll2_tx_queue tx_queue; struct qed_ll2_cbs cbs; }; The problem is that member `cbs` in `struct qed_ll2_info` is placed just after an object of type `struct qed_ll2_tx_queue`, which is in itself an implicit flexible structure, which by definition ends in a flexible array member, in this case `bds_set`. This causes an undefined behavior bug at run-time when dynamic memory is allocated for `bds_set`, which could lead to a serious issue if `cbs` in `struct qed_ll2_info` is overwritten by the contents of `bds_set`. Notice that the type of `cbs` is a structure full of function pointers (and a cookie :) ): include/linux/qed/qed_ll2_if.h: 107 typedef 108 void (*qed_ll2_complete_rx_packet_cb)(void *cxt, 109 struct qed_ll2_comp_rx_data *data); 110 111 typedef 112 void (*qed_ll2_release_rx_packet_cb)(void *cxt, 113 u8 connection_handle, 114 void *cookie, 115 dma_addr_t rx_buf_addr, 116 bool b_last_packet); 117 118 typedef 119 void (*qed_ll2_complete_tx_packet_cb)(void *cxt, 120 u8 connection_handle, 121 void *cookie, 122 dma_addr_t first_frag_addr, 123 bool b_last_fragment, 124 bool b_last_packet); 125 126 typedef 127 void (*qed_ll2_release_tx_packet_cb)(void *cxt, 128 u8 connection_handle, 129 void *cookie, 130 dma_addr_t first_frag_addr, 131 bool b_last_fragment, bool b_last_packet); 132 133 typedef 134 void (*qed_ll2_slowpath_cb)(void *cxt, u8 connection_handle, 135 u32 opaque_data_0, u32 opaque_data_1); 136 137 struct qed_ll2_cbs { 138 qed_ll2_complete_rx_packet_cb rx_comp_cb; 139 qed_ll2_release_rx_packet_cb rx_release_cb; 140 qed_ll2_complete_tx_packet_cb tx_comp_cb; 141 qed_ll2_release_tx_packet_cb tx_release_cb; 142 qed_ll2_slowpath_cb slowpath_cb; 143 void *cookie; 144 }; Fix this by moving the declaration of `cbs` to the middle of its containing structure `qed_ll2_info`, preventing it from being overwritten by the contents of `bds_set` at run-time. This bug was introduced in 2017, when `bds_set` was converted to a one-element array, and started to be used as a Variable Length Object (VLO) at run-time. Fixes: f5823fe6897c ("qed: Add ll2 option to limit the number of bds per packet") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/ZQ+Nz8DfPg56pIzr@work Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-03net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_regShigeru Yoshida1-1/+3
syzbot reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] BUG: KMSAN: uninit-value in smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 CPU: 0 PID: 8696 Comm: kworker/0:3 Not tainted 5.8.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 usbnet_probe+0x1152/0x3f90 drivers/net/usb/usbnet.c:1737 usb_probe_interface+0xece/0x1550 drivers/usb/core/driver.c:374 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_set_configuration+0x380f/0x3f10 drivers/usb/core/message.c:2032 usb_generic_driver_probe+0x138/0x300 drivers/usb/core/generic.c:241 usb_probe_device+0x311/0x490 drivers/usb/core/driver.c:272 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_new_device+0x1bd4/0x2a30 drivers/usb/core/hub.c:2554 hub_port_connect drivers/usb/core/hub.c:5208 [inline] hub_port_connect_change drivers/usb/core/hub.c:5348 [inline] port_event drivers/usb/core/hub.c:5494 [inline] hub_event+0x5e7b/0x8a70 drivers/usb/core/hub.c:5576 process_one_work+0x1688/0x2140 kernel/workqueue.c:2269 worker_thread+0x10bc/0x2730 kernel/workqueue.c:2415 kthread+0x551/0x590 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 Local variable ----buf.i87@smsc75xx_bind created at: __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 This issue is caused because usbnet_read_cmd() reads less bytes than requested (zero byte in the reproducer). In this case, 'buf' is not properly filled. This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads less bytes than requested. Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Reported-and-tested-by: syzbot+6966546b78d050bb0b5d@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6966546b78d050bb0b5d Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230923173549.3284502-1-syoshida@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-03ipv6: tcp: add a missing nf_reset_ct() in 3WHS handlingIlya Maximets1-3/+7
Commit b0e214d21203 ("netfilter: keep conntrack reference until IPsecv6 policy checks are done") is a direct copy of the old commit b59c270104f0 ("[NETFILTER]: Keep conntrack reference until IPsec policy checks are done") but for IPv6. However, it also copies a bug that this old commit had. That is: when the third packet of 3WHS connection establishment contains payload, it is added into socket receive queue without the XFRM check and the drop of connection tracking context. That leads to nf_conntrack module being impossible to unload as it waits for all the conntrack references to be dropped while the packet release is deferred in per-cpu cache indefinitely, if not consumed by the application. The issue for IPv4 was fixed in commit 6f0012e35160 ("tcp: add a missing nf_reset_ct() in 3WHS handling") by adding a missing XFRM check and correctly dropping the conntrack context. However, the issue was introduced to IPv6 code afterwards. Fixing it the same way for IPv6 now. Fixes: b0e214d21203 ("netfilter: keep conntrack reference until IPsecv6 policy checks are done") Link: https://lore.kernel.org/netdev/d589a999-d4dd-2768-b2d5-89dec64a4a42@ovn.org/ Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Acked-by: Florian Westphal <fw@strlen.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230922210530.2045146-1-i.maximets@ovn.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-03ipv4/fib: send notify when delete source address routesHangbin Liu3-0/+6
After deleting an interface address in fib_del_ifaddr(), the function scans the fib_info list for stray entries and calls fib_flush() and fib_table_flush(). Then the stray entries will be deleted silently and no RTM_DELROUTE notification will be sent. This lack of notification can make routing daemons, or monitor like `ip monitor route` miss the routing changes. e.g. + ip link add dummy1 type dummy + ip link add dummy2 type dummy + ip link set dummy1 up + ip link set dummy2 up + ip addr add 192.168.5.5/24 dev dummy1 + ip route add 7.7.7.0/24 dev dummy2 src 192.168.5.5 + ip -4 route 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 + ip monitor route + ip addr del 192.168.5.5/24 dev dummy1 Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5 Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5 As Ido reminded, fib_table_flush() isn't only called when an address is deleted, but also when an interface is deleted or put down. The lack of notification in these cases is deliberate. And commit 7c6bb7d2faaf ("net/ipv6: Add knob to skip DELROUTE message on device down") introduced a sysctl to make IPv6 behave like IPv4 in this regard. So we can't send the route delete notify blindly in fib_table_flush(). To fix this issue, let's add a new flag in "struct fib_info" to track the deleted prefer source address routes, and only send notify for them. After update: + ip monitor route + ip addr del 192.168.5.5/24 dev dummy1 Deleted 192.168.5.0/24 dev dummy1 proto kernel scope link src 192.168.5.5 Deleted broadcast 192.168.5.255 dev dummy1 table local proto kernel scope link src 192.168.5.5 Deleted local 192.168.5.5 dev dummy1 table local proto kernel scope host src 192.168.5.5 Deleted 7.7.7.0/24 dev dummy2 scope link src 192.168.5.5 Suggested-by: Thomas Haller <thaller@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230922075508.848925-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-03ovl: fix NULL pointer defer when encoding non-decodable lower fidAmir Goldstein1-1/+1
A wrong return value from ovl_check_encode_origin() would cause ovl_dentry_to_fid() to try to encode fid from NULL upper dentry. Reported-by: syzbot+2208f82282740c1c8915@syzkaller.appspotmail.com Fixes: 16aac5ad1fa9 ("ovl: support encoding non-decodable file handles") Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-10-02ovl: make use of ->layers safe in rcu pathwalkAmir Goldstein3-24/+21
ovl_permission() accesses ->layers[...].mnt; we can't have ->layers freed without an RCU delay on fs shutdown. Fortunately, kern_unmount_array() that is used to drop those mounts does include an RCU delay, so freeing is delayed; unfortunately, the array passed to kern_unmount_array() is formed by mangling ->layers contents and that happens without any delays. The ->layers[...].name string entries are used to store the strings to display in "lowerdir=..." by ovl_show_options(). Those entries are not accessed in RCU walk. Move the name strings into a separate array ofs->config.lowerdirs and reuse the ofs->config.lowerdirs array as the temporary mount array to pass to kern_unmount_array(). Reported-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20231002023711.GP3389589@ZenIV/ Acked-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-10-02ovl: fetch inode once in ovl_dentry_revalidate_common()Al Viro1-2/+4
d_inode_rcu() is right - we might be in rcu pathwalk; however, OVL_E() hides plain d_inode() on the same dentry... Fixes: a6ff2bc0be17 ("ovl: use OVL_E() and OVL_E_FLAGS() accessors") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-10-02ovl: move freeing ovl_entry past rcu delayAl Viro1-1/+2
... into ->free_inode(), that is. Fixes: 0af950f57fef "ovl: move ovl_entry into ovl_inode" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-10-02ovl: fix file reference leak when submitting aioAmir Goldstein1-2/+0
Commit 724768a39374 ("ovl: fix incorrect fdput() on aio completion") took a refcount on real file before submitting aio, but forgot to avoid clearing FDPUT_FPUT from real.flags stack variable. This can result in a file reference leak. Fixes: 724768a39374 ("ovl: fix incorrect fdput() on aio completion") Reported-by: Gil Lev <contact@levgil.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com>
2023-10-02sky2: Make sure there is at least one frag_addr availableKees Cook1-1/+1
In the pathological case of building sky2 with 16k PAGE_SIZE, the frag_addr[] array would never be used, so the original code was correct that size should be 0. But the compiler now gets upset with 0 size arrays in places where it hasn't eliminated the code that might access such an array (it can't figure out that in this case an rx skb with fragments would never be created). To keep the compiler happy, make sure there is at least 1 frag_addr in struct rx_ring_info: In file included from include/linux/skbuff.h:28, from include/net/net_namespace.h:43, from include/linux/netdevice.h:38, from drivers/net/ethernet/marvell/sky2.c:18: drivers/net/ethernet/marvell/sky2.c: In function 'sky2_rx_unmap_skb': include/linux/dma-mapping.h:416:36: warning: array subscript i is outside array bounds of 'dma_addr_t[0]' {aka 'long long unsigned int[]'} [-Warray-bounds=] 416 | #define dma_unmap_page(d, a, s, r) dma_unmap_page_attrs(d, a, s, r, 0) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/marvell/sky2.c:1257:17: note: in expansion of macro 'dma_unmap_page' 1257 | dma_unmap_page(&pdev->dev, re->frag_addr[i], | ^~~~~~~~~~~~~~ In file included from drivers/net/ethernet/marvell/sky2.c:41: drivers/net/ethernet/marvell/sky2.h:2198:25: note: while referencing 'frag_addr' 2198 | dma_addr_t frag_addr[ETH_JUMBO_MTU >> PAGE_SHIFT]; | ^~~~~~~~~ With CONFIG_PAGE_SIZE_16KB=y, PAGE_SHIFT == 14, so: #define ETH_JUMBO_MTU 9000 causes "ETH_JUMBO_MTU >> PAGE_SHIFT" to be 0. Use "?: 1" to solve this build warning. Cc: Mirko Lindner <mlindner@marvell.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309191958.UBw1cjXk-lkp@intel.com/ Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.