| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add the MFDE.log_ip field to devlink health reporter in order to ease
firmware debug. This field encodes the instruction pointer that triggered
the CR space timeout.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend MFDE (Monitoring FW Debug) register with new field specifying the
instruction pointer that triggered the CR space timeout.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The indicated version fixes the following two issues:
- MIRROR_SAMPLER_ACTION.mirror_probability_rate inverted. This has
implication for per-flow sampling.
- When adjacency is replaced-if-inactive (RATR.opcode=3), bad parameter
was reported when replacing an active entry. This breaks offload of
resilient next-hop groups.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The comment did not include the register name.
Add `pmaos` to align the comment with other comments.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'Uppers' is not clear enough for all users when referring to upper
devices.
Reword the error message so it will be clearer.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The series of space has been replaced by tab space
wherever required.
Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As explained in commit 29d98f54a4fe ("net: enetc: allow hardware
timestamping on TX queues with tc-etf enabled"), hardware TX
timestamping requires an skb with skb->tstamp = 0. When a packet is sent
with SO_TXTIME, the skb->skb_mstamp_ns corrupts the value of skb->tstamp,
so the drivers need to explicitly reset skb->tstamp to zero after
consuming the TX time.
Create a helper named skb_txtime_consumed() which does just that. All
drivers which offload TC_SETUP_QDISC_ETF should implement it, and it
would make it easier to assess during review whether they do the right
thing in order to be compatible with hardware timestamping or not.
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Following the recent update to MAINTAINERS update my e-mail address.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Following the recent update to MAINTAINERS update my e-mail address.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Following the recent update to MAINTAINERS update my e-mail address.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement this callback in order to get the offloaded stats added to the
kernel stats.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the following coccicheck warning:
./drivers/isdn/mISDN/dsp_core.c:956:6-9: Unneeded variable: "err".
Return "0" on line 1001
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
BCM4908 devices have MAC address accessible using NVMEM so it's needed
to use OF helper for reading it.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
gro list uses skb_shinfo(skb)->frag_list to link two skb together,
and NAPI_GRO_CB(p)->last->next is used when there are more skb,
see skb_gro_receive_list(). gso expects that each segmented skb is
linked together using skb->next, so only the first skb->next need
to set to skb_shinfo(skb)-> frag_list when doing gso list segment.
It is the same reason that nskb->next does not need to be set to
list_skb before goto the error handling, because nskb->next already
pointers to list_skb.
And nskb is also the last skb at the end of loop, so remove tail
variable and use nskb instead.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding a couple of break statements instead of
just letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of flexible-array members in
smt_sif_operation structure, instead of one-element arrays. Also, make
use of the struct_size() helper instead of the open-coded version
to calculate the size of the struct-with-flex-array. Additionally, make
use of the typeof operator to properly determine the object type to be
passed to macro smtod().
Also, this helps the ongoing efforts to enable -Warray-bounds by fixing
the following warnings:
CC [M] drivers/net/fddi/skfp/smt.o
drivers/net/fddi/skfp/smt.c: In function ‘smt_send_sif_operation’:
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
| ^~~
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
| ^~~
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
| ^~~
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
| ^~~
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
| ^~~
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
| ^~~
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
| ^~~
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
| ^~~
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
| ^~~
drivers/net/fddi/skfp/smt.c:1084:30: warning: array subscript 1 is above array bounds of ‘struct smt_p_lem[1]’ [-Warray-bounds]
1084 | smt_fill_lem(smc,&sif->lem[i],i) ;
| ~~~~~~~~^~~
In file included from drivers/net/fddi/skfp/h/smc.h:42,
from drivers/net/fddi/skfp/smt.c:15:
drivers/net/fddi/skfp/h/smt.h:767:19: note: while referencing ‘lem’
767 | struct smt_p_lem lem[1] ; /* phy lem status */
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no need to assign the msg->msg_name to sin or sin6,
because there is DECLARE_SOCKADDR statement.
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rewriteing -> rewriting
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
wheter -> whether
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The number of queues implemented by many virtio backends is limited,
especially some machines have a large number of CPUs. In this case, it
is often impossible to allocate a separate queue for
XDP_TX/XDP_REDIRECT, then xdp cannot be loaded to work, even xdp does
not use the XDP_TX/XDP_REDIRECT.
This patch allows XDP_TX/XDP_REDIRECT to run by reuse the existing SQ
with __netif_tx_lock() hold when there are not enough queues.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The bit mask for MSG_* seems a little confused here. Replace it
with BIT() to make it clear to understand.
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After my patch there is CONFIG_ATA defined twice.
Remove the duplicate one.
Same problem for CONFIG_HAPPYMEAL, except I added as builtin for boot
test with NFS.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: a57cdeb369ef ("sparc: sparc64_defconfig: add necessary configs for qemu")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
is_no_fault_exception() has two bugs which were discovered via random
opcode testing with stress-ng. Both are caused by improper filtering
of opcodes.
The first bug can be triggered by a floating point store with a no-fault
ASI, for instance "sta %f0, [%g0] #ASI_PNF", opcode C1A01040.
The code first tests op3[5] (0x1000000), which denotes a floating
point instruction, and then tests op3[2] (0x200000), which denotes a
store instruction. But these bits are not mutually exclusive, and the
above mentioned opcode has both bits set. The intent is to filter out
stores, so the test for stores must be done first in order to have
any effect.
The second bug can be triggered by a floating point load with one of
the invalid ASI values 0x8e or 0x8f, which pass this check in
is_no_fault_exception():
if ((asi & 0xf2) == ASI_PNF)
An example instruction is "ldqa [%l7 + %o7] #ASI 0x8f, %f38",
opcode CF95D1EF. Asi values greater than 0x8b (ASI_SNFL) are fatal
in handle_ldf_stq(), and is_no_fault_exception() must not allow these
invalid asi values to make it that far.
In both of these cases, handle_ldf_stq() reacts by calling
sun4v_data_access_exception() or spitfire_data_access_exception(),
which call is_no_fault_exception() and results in an infinite
recursion.
Signed-off-by: Rob Gardner <rob.gardner@oracle.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The cited commit reworked the state machine for pending TX buffers.
In qeth_iqd_tx_complete() it turned PENDING into a transient state, and
uses NEED_QAOB for buffers that get parked while waiting for their QAOB
completion.
But it missed to adjust the check in qeth_tx_complete_buf(). So if
qeth_tx_complete_pending_bufs() is called during teardown to drain
the parked TX buffers, we no longer raise a notification for af_iucv.
Instead of updating the checked state, just move this code into
qeth_tx_complete_pending_bufs() itself. This also gets rid of the
special-case in the common TX completion path.
Fixes: 8908f36d20d8 ("s390/qeth: fix af_iucv notification race")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a QAOB notifies us that a pending TX buffer has been delivered, the
actual TX completion processing by qeth_tx_complete_pending_bufs()
is done within the context of a TX NAPI instance. We shouldn't rely on
this instance being scheduled by some other TX event, but just do it
ourselves.
qeth_qdio_handle_aob() is called from qeth_poll(), ie. our main NAPI
instance. To avoid touching the TX queue's NAPI instance
before/after it is (un-)registered, reorder the code in qeth_open()
and qeth_stop() accordingly.
Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current design attaches a pending TX buffer to a custom
single-linked list, which is anchored at the buffer's slot on the
TX ring. The buffer is then checked for final completion whenever
this slot is processed during a subsequent TX NAPI poll cycle.
But if there's insufficient traffic on the ring, we might never make
enough progress to get back to this ring slot and discover the pending
buffer's final TX completion. In particular if this missing TX
completion blocks the application from sending further traffic.
So convert the custom single-linked list code to a per-queue list_head,
and scan this list on every TX NAPI cycle.
Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When qeth_alloc_qdio_queues() fails to allocate one of the buffers that
back an Output Queue, the 'out_freeoutqbufs' path will free all
previously allocated buffers for this queue. But it misses to free the
half-finished queue struct itself.
Move the buffer allocation into qeth_alloc_output_queue(), and deal with
such errors internally.
Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A packet with skb_inner_network_header(skb) == skb_network_header(skb)
and ETH_P_MPLS_UC will prevent mpls_gso_segment from pulling any headers
from the packet. Subsequently, the call to skb_mac_gso_segment will
again call mpls_gso_segment with the same packet leading to an infinite
loop. In addition, ensure that the header length is a multiple of four,
which should hold irrespective of the number of stacked labels.
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For gso packets, virtio_net_hdr_set_proto sets the protocol (if it isn't
set) based on the type in the virtio net hdr, but the skb could contain
anything since it could come from packet_snd through a raw socket. If
there is a mismatch between what virtio_net_hdr_set_proto sets and
the actual protocol, then the skb could be handled incorrectly later
on.
An example where this poses an issue is with the subsequent call to
skb_flow_dissect_flow_keys_basic which relies on skb->protocol being set
correctly. A specially crafted packet could fool
skb_flow_dissect_flow_keys_basic preventing EINVAL to be returned.
Avoid blindly trusting the information provided by the virtio net header
by checking that the protocol in the packet actually matches the
protocol set by virtio_net_hdr_set_proto. Note that since the protocol
is only checked if skb->dev implements header_ops->parse_protocol,
packets from devices without the implementation are not checked at this
stage.
Fixes: 9274124f023b ("net: stricter validation of untrusted gso packets")
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The XDP_REDIRECT implementations for maps and non-maps are fairly
similar, but obviously need to take different code paths depending on
if the target is using a map or not. Today, the redirect targets for
XDP either uses a map, or is based on ifindex.
Here, the map type and id are added to bpf_redirect_info, instead of
the actual map. Map type, map item/ifindex, and the map_id (if any) is
passed to xdp_do_redirect().
For ifindex-based redirect, used by the bpf_redirect() XDP BFP helper,
a special map type/id are used. Map type of UNSPEC together with map id
equal to INT_MAX has the special meaning of an ifindex based
redirect. Note that valid map ids are 1 inclusive, INT_MAX exclusive
([1,INT_MAX[).
In addition to making the code easier to follow, using explicit type
and id in bpf_redirect_info has a slight positive performance impact
by avoiding a pointer indirection for the map type lookup, and instead
use the cacheline for bpf_redirect_info.
Since the actual map is not passed via bpf_redirect_info anymore, the
map lookup is only done in the BPF helper. This means that the
bpf_clear_redirect_map() function can be removed. The actual map item
is RCU protected.
The bpf_redirect_info flags member is not used by XDP, and not
read/written any more. The map member is only written to when
required/used, and not unconditionally.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210308112907.559576-3-bjorn.topel@gmail.com
|
|
Currently the bpf_redirect_map() implementation dispatches to the
correct map-lookup function via a switch-statement. To avoid the
dispatching, this change adds bpf_redirect_map() as a map
operation. Each map provides its bpf_redirect_map() version, and
correct function is automatically selected by the BPF verifier.
A nice side-effect of the code movement is that the map lookup
functions are now local to the map implementation files, which removes
one additional function call.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210308112907.559576-2-bjorn.topel@gmail.com
|
|
Don't assign dp to partner if it's the same port that xrs700x_hsr_join
was called with. The partner port is supposed to be the other port in
the HSR/PRP redundant pair not the same port. This fixes an issue
observed in testing where forwarding between redundant HSR ports on this
switch didn't work depending on the order the ports were added to the
hsr device.
Fixes: bd62e6f5e6a9 ("net: dsa: xrs700x: add HSR offloading support")
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add missing return type to BPF_KPROBE definition. Without it, compiler
generates the following warning:
progs/loop6.c:68:12: warning: type specifier missing, defaults to 'int' [-Wimplicit-int]
BPF_KPROBE(trace_virtqueue_add_sgs, void *unused, struct scatterlist **sgs,
^
1 warning generated.
Fixes: 86a35af628e5 ("selftests/bpf: Add a verifier scale test with unknown bounded loop")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210309044322.3487636-1-andrii@kernel.org
|
|
For the devices in this driver, the default qdisc is "noqueue",
because their "tx_queue_len" is 0.
In function "__dev_queue_xmit" in "net/core/dev.c", devices with the
"noqueue" qdisc are specially handled. Packets are transmitted without
being queued after a "dev->flags & IFF_UP" check. However, it's possible
that even if this check succeeds, "ops->ndo_stop" may still have already
been called. This is because in "__dev_close_many", "ops->ndo_stop" is
called before clearing the "IFF_UP" flag.
If we call "netif_stop_queue" in "ops->ndo_stop", then it's possible in
"__dev_queue_xmit", it sees the "IFF_UP" flag is present, and then it
checks "netif_xmit_stopped" and finds that the queue is already stopped.
In this case, it will complain that:
"Virtual device ... asks to queue packet!"
To prevent "__dev_queue_xmit" from generating this complaint, we should
not call "netif_stop_queue" in "ops->ndo_stop".
We also don't need to call "netif_start_queue" in "ops->ndo_open",
because after a netdev is allocated and registered, the
"__QUEUE_STATE_DRV_XOFF" flag is initially not set, so there is no need
to call "netif_start_queue" to clear it.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check that dumping various floating-point types produces a valid C
code.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210309005649.162480-3-iii@linux.ibm.com
|
|
Verify that bpf_core_field_size() is working correctly with floats.
Also document the required clang version.
Suggested-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210309005649.162480-2-iii@linux.ibm.com
|
|
BMIPS is one of the few platforms that do change the exception base.
After commit 2dcb39645441 ("memblock: do not start bottom-up allocations
with kernel_end") we started seeing BMIPS boards fail to boot with the
built-in FDT being corrupted.
Before the cited commit, early allocations would be in the [kernel_end,
RAM_END] range, but after commit they would be within [RAM_START +
PAGE_SIZE, RAM_END].
The custom exception base handler that is installed by
bmips_ebase_setup() done for BMIPS5000 CPUs ends-up trampling on the
memory region allocated by unflatten_and_copy_device_tree() thus
corrupting the FDT used by the kernel.
To fix this, we need to perform an early reservation of the custom
exception space. Additional we reserve the first 4k (1k for R3k) for
either normal exception vector space (legacy CPUs) or special vectors
like cache exceptions.
Huge thanks to Serge for analysing and proposing a solution to this
issue.
Fixes: 2dcb39645441 ("memblock: do not start bottom-up allocations with kernel_end")
Reported-by: Kamal Dasu <kdasu.kdev@gmail.com>
Debugged-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
this one is similar to the phy_data allocation fix in uPD98402, the
driver allocate the idt77105_priv and store to dev_data but later
dereference using dev->dev_data, which will cause null-ptr-dereference.
fix this issue by changing dev_data to phy_data so that PRIV(dev) can
work correctly.
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dev->dev_data is set in zatm.c, calling zatm_start() will overwrite this
dev->dev_data in uPD98402_start() and a subsequent PRIV(dev)->lock
(i.e dev->phy_data->lock) will result in a null-ptr-dereference.
I believe this is a typo and what it actually want to do is to allocate
phy_data instead of dev_data.
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
phy_data means private PHY data not date
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When sock_alloc_send_skb() returns NULL to skb, no error return code of
qrtr_sendmsg() is assigned.
To fix this bug, rc is assigned with -ENOMEM in this case.
Fixes: 194ccc88297a ("net: qrtr: Support decoding incoming v2 packets")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Danielle Ratson
Petr Machata
Amit Cohen
Shubhankar Kuranagatti
Vladimir Oltean
Maciej W. Rozycki
Ido Schimmel
Yang Li
Rafał Miłecki
Yunsheng Lin
Gustavo A. R. Silva
Yejune Deng
Wang Qing
Xuan Zhuo
Menglong Dong
Corentin Labbe
Rob Gardner
Julian Wiedmann
Balazs Nemeth
Björn Töpel
George McCollister
Andrii Nakryiko
Xie He
Ilya Leoshkevich
Thomas Bogendoerfer
Tong Zhang
Jia-Ju Bai