aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2023-06-15arm64: dts: ti: add verdin am62 yaviaFrancesco Dolcini4-0/+253
Add Toradex Verdin AM62 Yavia. Link: https://www.toradex.com/products/carrier-board/yavia Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20230615095058.33890-6-francesco@dolcini.it Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: add verdin am62 dahliaFrancesco Dolcini4-0/+207
Add Toradex Verdin AM62 Dahlia. Link: https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20230615095058.33890-5-francesco@dolcini.it Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: add verdin am62Francesco Dolcini7-0/+1696
This patch adds the device tree to support Toradex Verdin AM62 a computer on module which can be used on different carrier boards and the Toradex Verdin Development Board carrier board. The module consists of an TI AM62 family SoC (either AM623 or AM625), a TPS65219 PMIC, a Gigabit Ethernet PHY, 512MB to 2GB of LPDDR4 RAM, an eMMC, a TLA2024 ADC, an I2C EEPROM, an RX8130 RTC, and optional Parallel RGB to MIPI DSI bridge plus an optional Bluetooth/Wi-Fi module. Anything that is not self-contained on the module is disabled by default. So far there is no display nor USB role switch supported, apart of that all the other functionalities are fine. Link: https://developer.toradex.com/hardware/verdin-som-family/modules/verdin-am62/ Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 Link: https://www.toradex.com/products/carrier-board/verdin-development-board-kit Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20230615095058.33890-4-francesco@dolcini.it Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15dt-bindings: arm: ti: add toradex,verdin-am62 et al.Francesco Dolcini1-0/+20
Add toradex,verdin-am62 for Toradex Verdin AM62 SoM, its nonwifi and wifi variants and the carrier boards (Dahlia, Verdin Development Board and Yavia) they may be mated in. Link: https://developer.toradex.com/hardware/verdin-som-family/modules/verdin-am62/ Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230615095058.33890-2-francesco@dolcini.it Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625Wadim Egorov3-0/+591
The phyCORE-AM62x [1] is a SoM (System on Module) featuring TI's AM62x SoC. It can be used in combination with different carrier boards. This module can come with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs from the AM62x family. A development Kit, called phyBOARD-Lyra [2] is used as a carrier board reference design around the AM62x SoM. Supported features: * Debug UART * SPI NOR Flash * eMMC * 2x Ethernet * Micro SD card * I2C EEPROM * I2C RTC * GPIO Expander * LEDs * USB For more details, see: [1] Product page SoM: https://www.phytec.com/product/phycore-am62x [2] Product page CB: https://www.phytec.com/product/phyboard-am62x Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230504140143.1425951-2-w.egorov@phytec.de Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15dt-bindings: arm: ti: Add bindings for PHYTEC AM62x based hardwareWadim Egorov1-0/+6
Add devicetree bindings for AM62x based phyCORE-AM62 SoM and phyBOARD-Lyra RDK. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230504140143.1425951-1-w.egorov@phytec.de Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j7200-mcu-wakeup: Remove 0x unit address prefix from nodenameNishanth Menon1-3/+3
unit-address should not use a 0x prefix. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230424173623.477577-2-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eepromNishanth Menon1-0/+13
Enable wakeup_i2c and use un-used pinmux. While at it, describe the board detection eeprom present on the board. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230601183151.1000157-6-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-am64: Add ESM supportNishanth Menon2-0/+12
Add Error Signaling Module (ESM) instances in MCU and MAIN domains. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230530185335.79942-3-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-am62: Add ESM supportNishanth Menon2-0/+12
Add Error Signaling Module (ESM) instances in MCU and MAIN domains. Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20230530185335.79942-2-nm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j7200: Add ESM supportNeha Malcom Francis2-0/+7
Add address entry mapping ESM on J7200. Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Link: https://lore.kernel.org/r/20230504080526.133149-4-n-francis@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2023-06-15arm64: dts: ti: k3-j721e: Add ESM supportNeha Malcom Francis2-0/+7
Add address entry mapping ESM on J721E. Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Link: https://lore.kernel.org/r/20230504080526.133149-3-n-francis@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>