| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Silence compiler warning about used but uninitialized 'ipu_state'
variable. In practice, the variable would never be used when
uninitialized, but the compiler cannot know that 'priv->ipu_plane' will
always be NULL if CONFIG_INGENIC_IPU is disabled.
Silence the warning by initializing the value to NULL.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719093834.14084-1-paul@crapouillou.net
|
|
Bump version to 1.1 and set date to 2020-07-16.
v3: New patch
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-12-paul@crapouillou.net
|
|
Support multiple panels or bridges connected to the same DPI output of
the SoC. This setup can be found for instance on the GCW Zero, where the
same DPI output interfaces the internal 320x240 TFT panel, and the ITE
IT6610 HDMI chip.
v2: No change
v3: Allow > 80-char lines where it makes sense
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-11-paul@crapouillou.net
|
|
Add support for the Image Processing Unit (IPU) found in all Ingenic
SoCs.
The IPU can upscale and downscale a source frame of arbitrary size
ranging from 4x4 to 4096x4096 on newer SoCs, with bicubic filtering
on newer SoCs, bilinear filtering on older SoCs. Nearest-neighbour can
also be obtained with proper coefficients.
Starting from the JZ4725B, the IPU supports a mode where its output is
sent directly to the LCDC, without having to be written to RAM first.
This makes it possible to use the IPU as a DRM plane on the compatible
SoCs, and have it convert and scale anything the userspace asks for to
what's available for the display.
Regarding pixel formats, older SoCs support packed YUV 4:2:2 and various
planar YUV formats. Newer SoCs introduced support for RGB.
Since the IPU is a separate hardware block, to make it work properly the
Ingenic DRM driver will now register itself as a component master in
case the IPU driver has been enabled in the config.
When enabled in the config, the CRTC will see the IPU as a second primary
plane. It cannot be enabled at the same time as the regular primary
plane. It has the same priority, which means that it will also display
below the overlay plane.
v2: - ingenic-ipu is no longer its own module. It will be built
into the ingenic-drm module.
- If enabled in the config, both the core driver and the IPU
driver will register as components; otherwise the core
driver will bypass that and call the ingenic_drm_bind()
function directly.
- Since both files now build into the same module, the
symbols previously exported as GPL are not exported anymore,
since they are only used internally.
- Fix SPDX license header in ingenic-ipu.h
- Avoid using 'for(;;);' loops without trailing statement(s)
v3: - Pass priv structure to IRQ handler; that way we don't hardcode
the expectation that the IPU plane is at index #0.
- Rework osd_changed() to account for src_* changes
- Add multiplanar YUV 4:4:4 support
- Commit fb addresses to HW at vblank, since addr registers are
not shadow registers
- Probe IPU component later so that IPU plane is last
- Fix driver not working on IPU-less hardware
- Use IPU driver's name as the IRQ name to avoid having two
'ingenic-drm' in /proc/interrupts
- Fix IPU only working for still images on JZ4725B
- Add a bit more code comments
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-10-paul@crapouillou.net
|
|
All Ingenic SoCs starting from the JZ4725B support OSD mode.
In this mode, two separate planes can be used. They can have different
positions and sizes, and one can be overlayed on top of the other.
v2: Use fallthrough; instead of /* fall-through */
v3: - Add custom atomic_tail function to handle case where HW gives no
VBLANK
- Use regmap_set_bits() / regmap_clear_bits() when possible
- Use dma_hwdesc_f{0,1} fields in priv structure instead of array
- Use dmam_alloc_coherent() instead of dma_alloc_coherent()
- Use more meaningful 0xf0 / 0xf1 values as DMA descriptors IDs
- Add a bit more code comments
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-9-paul@crapouillou.net
|
|
Use dmam_alloc_coherent() instead of dma_alloc_coherent(). Then we don't
need to register a custom cleanup handler.
v3: New patch
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-8-paul@crapouillou.net
|
|
Move the register definitions to ingenic-drm.h, to keep
ingenic-drm-drv.c tidy.
v2: Fix SPDX license tag
v3: No change
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-7-paul@crapouillou.net
|
|
The address of the DMA descriptor never changes. It can therefore be set
in the probe function.
v2-v3: No change
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-6-paul@crapouillou.net
|
|
If you pass a string that is not terminated with a carriage return to
dev_err(), it will eventually be printed with a carriage return, but
not right away, since the kernel will wait for a pr_cont().
v2: New patch
v3: No change
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-5-paul@crapouillou.net
|
|
Full rename without any modification, except to the Makefile.
Renaming ingenic-drm.c to ingenic-drm-drv.c allow to decouple the module
name from the source file name in the Makefile. This will be useful
later when more source files are added.
v2: New patch
v3: No change
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-4-paul@crapouillou.net
|
Paul Cercueil