| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Depending on the secureboot signature on EFI\BOOT\BOOTX86.EFI the
Lenovo Yoga Tab 3 UEFI will switch its OSID ACPI variable between
1 (Windows) and 4 (Android(GMIN)).
In Windows mode a GPIO event handler gets installed for GPO1 pin 5,
causing Linux' x86-android-tables code which deals with the general
brokenness of this device's ACPI tables to fail to probe with:
[ 17.853705] x86_android_tablets: error -16 getting GPIO INT33FF:01 5
[ 17.859623] x86_android_tablets x86_android_tablets: probe with driver
which renders sound, the touchscreen, charging-management,
battery-monitoring and more non functional.
Add ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS to the existing quirks for this
device to fix this.
Reported-by: Agoston Lorincz <pipacsba@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/CAMEzqD+DNXrAvUOHviB2O2bjtcbmo3xH=kunKr4nubuMLbb_0A@mail.gmail.com/
Cc: All applicable <stable@kernel.org>
Fixes: fe820db35275 ("ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20250325210450.358506-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Like the ASUS Vivobook X1504VAP and Vivobook X1704VAP, the ASUS Vivobook 14
X1404VAP has its keyboard IRQ (1) described as ActiveLow in the DSDT, which
the kernel overrides to EdgeHigh breaking the keyboard.
$ sudo dmidecode
[…]
System Information
Manufacturer: ASUSTeK COMPUTER INC.
Product Name: ASUS Vivobook 14 X1404VAP_X1404VA
[…]
$ grep -A 30 PS2K dsdt.dsl | grep IRQ -A 1
IRQ (Level, ActiveLow, Exclusive, )
{1}
Add the X1404VAP to the irq1_level_low_skip_override[] quirk table to fix
this.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219224
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Anton Shyndin <mrcold.il@gmail.com>
Link: https://patch.msgid.link/20250318160903.77107-1-pmenzel@molgen.mpg.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Intel Over-Clocking Watchdogs are described in ACPI tables by both the
generic PNP0C02 _CID and their ACPI _HID. The presence of the _CID then
causes the PNP scan handler to attach to the watchdog, preventing the
actual watchdog driver from binding. Address this by adding the ACPI
_HIDs to the list of non-PNP devices, so that the PNP scan handler is
bypassed.
Note that these watchdogs can be described by multiple _HIDs for what
seems to be identical hardware. This commit is not a complete list of
all the possible watchdog ACPI _HIDs.
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Link: https://patch.msgid.link/20250317-ivo-intel_oc_wdt-v3-2-32c396f4eefd@siemens.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
We've had this before: when we remove infrastructure to generate files,
the old stale build artifacts still remain in-tree. And when the
infrastructure to generate them is gone, so is the gitignore file for
those build artifacts.
End result: git will see the old generated files, and people will
mistakenly commit them. That's what happened with the 'genheaders' file
not that long ago (see commit 04a3389b3535 "Remove stale generated
'genheaders' file").
This time it's commit 9c54baab4401 ("x86/boot: Drop CRC-32 checksum and
the build tool that generates it") that removed the 'build' file from
the arch/x86/boot/tools/ subdirectory, and removed the .gitignore file
too (because the whole subdirectory is gone).
And as a result, if you don't do a 'git clean -dqfx' or similar to clean
up your tree, 'git status' will say
Untracked files:
(use "git add <file>..." to include in what will be committed)
arch/x86/boot/tools/
and some hapless sleep-deprived developer will inevitably decide that
that means that they need to 'git add' that directory. Which would
bring back some stale generated file that we most definitely do not want
in the tree.
So when removing directories that had special .gitignore patterns, make
sure to add a new gitignore entry in the parent directory for the no
longer existing subdirectory.
It will avoid mistakes.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Fixes: 9c54baab4401 ("x86/boot: Drop CRC-32 checksum and the build tool that generates it")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
|
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 5823 at lib/refcount.c:28 refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28
RIP: 0010:refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28
Call Trace:
<TASK>
io_notif_flush io_uring/notif.h:40 [inline]
io_send_zc_cleanup+0x121/0x170 io_uring/net.c:1222
io_clean_op+0x58c/0x9a0 io_uring/io_uring.c:406
io_free_batch_list io_uring/io_uring.c:1429 [inline]
__io_submit_flush_completions+0xc16/0xd20 io_uring/io_uring.c:1470
io_submit_flush_completions io_uring/io_uring.h:159 [inline]
Before the blamed commit, sendzc relied on io_req_msg_cleanup() to clear
REQ_F_NEED_CLEANUP, so after the following snippet the request will
never hit the core io_uring cleanup path.
io_notif_flush();
io_req_msg_cleanup();
The easiest fix is to null the notification. io_send_zc_cleanup() can
still be called after, but it's tolerated.
Reported-by: syzbot+cf285a028ffba71b2ef5@syzkaller.appspotmail.com
Tested-by: syzbot+cf285a028ffba71b2ef5@syzkaller.appspotmail.com
Fixes: cc34d8330e036 ("io_uring/net: don't clear REQ_F_NEED_CLEANUP unconditionally")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e1306007458b8891c88c4f20c966a17595f766b0.1742643795.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Once a key's reference count has been reduced to 0, the garbage collector
thread may destroy it at any time and so key_put() is not allowed to touch
the key after that point. The most key_put() is normally allowed to do is
to touch key_gc_work as that's a static global variable.
However, in an effort to speed up the reclamation of quota, this is now
done in key_put() once the key's usage is reduced to 0 - but now the code
is looking at the key after the deadline, which is forbidden.
Fix this by using a flag to indicate that a key can be gc'd now rather than
looking at the key's refcount in the garbage collector.
Fixes: 9578e327b2b4 ("keys: update key quotas in key_put()")
Reported-by: syzbot+6105ffc1ded71d194d6d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/673b6aec.050a0220.87769.004a.GAE@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: syzbot+6105ffc1ded71d194d6d@syzkaller.appspotmail.com
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
CONFIG_TRACE_BRANCH_PROFILING inserts a call to ftrace_likely_update()
for each use of likely() or unlikely(). That breaks noinstr rules if
the affected function is annotated as noinstr.
Disable branch profiling for files with noinstr functions. In addition
to some individual files, this also includes the entire arch/x86
subtree, as well as the kernel/entry, drivers/cpuidle, and drivers/idle
directories, all of which are noinstr-heavy.
Due to the nature of how sched binaries are built by combining multiple
.c files into one, branch profiling is disabled more broadly across the
sched code than would otherwise be needed.
This fixes many warnings like the following:
vmlinux.o: warning: objtool: do_syscall_64+0x40: call to ftrace_likely_update() leaves .noinstr.text section
vmlinux.o: warning: objtool: __rdgsbase_inactive+0x33: call to ftrace_likely_update() leaves .noinstr.text section
vmlinux.o: warning: objtool: handle_bug.isra.0+0x198: call to ftrace_likely_update() leaves .noinstr.text section
...
Reported-by: Ingo Molnar <mingo@kernel.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/fb94fc9303d48a5ed370498f54500cc4c338eb6d.1742586676.git.jpoimboe@kernel.org
|
|
Although IBS "swfilt" can prevent leaking samples with kernel RIP to the
userspace, there are few subtle cases where a 'data' address and/or a
'branch target' address can fall under kernel address range although RIP
is from userspace. Prevent leaking kernel 'data' addresses by discarding
such samples when {exclude_kernel=1,swfilt=1}.
IBS can now be invoked by unprivileged user with the introduction of
"swfilt". However, this creates a loophole in the interface where an
unprivileged user can get physical address of the userspace virtual
addresses through IBS register raw dump (PERF_SAMPLE_RAW). Prevent this
as well.
This upstream commit fixed the most obvious leak:
65a99264f5e5 perf/x86: Check data address for IBS software filter
Follow that up with a more complete fix.
Fixes: d29e744c7167 ("perf/x86: Relax privilege filter restriction on AMD IBS")
Suggested-by: Matteo Rizzo <matteorizzo@google.com>
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250321161251.1033-1-ravi.bangoria@amd.com
|
|
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503220640.hjiacW2C-lkp@intel.com/
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Current code varies in how the size of the variable size input header
for hypercalls is calculated when the input contains struct hv_vpset.
Surprisingly, this variation is correct, as different hypercalls make
different choices for what portion of struct hv_vpset is treated as part
of the variable size input header. The Hyper-V TLFS is silent on these
details, but the behavior has been confirmed with Hyper-V developers.
To avoid future confusion about these differences, add comments to
struct hv_vpset, and to hypercall call sites with input that contains
a struct hv_vpset. The comments describe the overall situation and
the calculation that should be used at each particular call site.
No functional change as only comments are updated.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250318214919.958953-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250318214919.958953-1-mhklinux@outlook.com>
|
|
Provide a set of IOCTLs for creating and managing child partitions when
running as root partition on Hyper-V. The new driver is enabled via
CONFIG_MSHV_ROOT.
A brief overview of the interface:
MSHV_CREATE_PARTITION is the entry point, returning a file descriptor
representing a child partition. IOCTLs on this fd can be used to map
memory, create VPs, etc.
Creating a VP returns another file descriptor representing that VP which
in turn has another set of corresponding IOCTLs for running the VP,
getting/setting state, etc.
MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be
used for a number of partition or VP hypercalls. This is for hypercalls
that do not affect any state in the kernel driver, such as getting and
setting VP registers and partition properties, translating addresses,
etc. It is "passthrough" because the binary input and output for the
hypercall is only interpreted by the VMM - the kernel driver does
nothing but insert the VP and partition id where necessary (which are
always in the same place), and execute the hypercall.
Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Co-developed-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Co-developed-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Co-developed-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Lei Chen reported a bug with CLOCK_MONOTONIC_COARSE having inconsistencies
when NTP is adjusting the clock frequency.
This has gone seemingly undetected for ~15 years, illustrating a clear gap
in our testing.
The skew_consistency test is intended to catch this sort of problem, but
was focused on only evaluating CLOCK_MONOTONIC, and thus missed the problem
on CLOCK_MONOTONIC_COARSE.
So adjust the test to run with all clockids for 60 seconds each instead of
10 minutes with just CLOCK_MONOTONIC.
Reported-by: Lei Chen <lei.chen@smartx.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250320200306.1712599-2-jstultz@google.com
Closes: https://lore.kernel.org/lkml/20250310030004.3705801-1-lei.chen@smartx.com/
|
|
Lei Chen raised an issue with CLOCK_MONOTONIC_COARSE seeing time
inconsistencies.
Lei tracked down that this was being caused by the adjustment
tk->tkr_mono.xtime_nsec -= offset;
which is made to compensate for the unaccumulated cycles in offset when the
multiplicator is adjusted forward, so that the non-_COARSE clockids don't
see inconsistencies.
However, the _COARSE clockid getter functions use the adjusted xtime_nsec
value directly and do not compensate the negative offset via the
clocksource delta multiplied with the new multiplicator. In that case the
caller can observe time going backwards in consecutive calls.
By design, this negative adjustment should be fine, because the logic run
from timekeeping_adjust() is done after it accumulated approximately
multiplicator * interval_cycles
into xtime_nsec. The accumulated value is always larger then the
mult_adj * offset
value, which is subtracted from xtime_nsec. Both operations are done
together under the tk_core.lock, so the net change to xtime_nsec is always
always be positive.
However, do_adjtimex() calls into timekeeping_advance() as well, to to
apply the NTP frequency adjustment immediately. In this case,
timekeeping_advance() does not return early when the offset is smaller then
interval_cycles. In that case there is no time accumulated into
xtime_nsec. But the subsequent call into timekeeping_adjust(), which
modifies the multiplicator, subtracts from xtime_nsec to correct
for the new multiplicator.
Here because there was no accumulation, xtime_nsec becomes smaller than
before, which opens a window up to the next accumulation, where the _COARSE
clockid getters, which don't compensate for the offset, can observe the
inconsistency.
To fix this, rework the timekeeping_advance() logic so that when invoked
from do_adjtimex(), the time is immediately forwarded to accumulate also
the sub-interval portion into xtime. That means the remaining offset
becomes zero and the subsequent multiplier adjustment therefore does not
modify xtime_nsec.
There is another related inconsistency. If xtime is forwarded due to the
instantaneous multiplier adjustment, the NTP error, which was accumulated
with the previous setting, becomes meaningless.
Therefore clear the NTP error as well, after forwarding the clock for the
instantaneous multiplier update.
Fixes: da15cfdae033 ("time: Introduce CLOCK_REALTIME_COARSE")
Reported-by: Lei Chen <lei.chen@smartx.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250320200306.1712599-1-jstultz@google.com
Closes: https://lore.kernel.org/lkml/20250310030004.3705801-1-lei.chen@smartx.com/
|
|
Setting pci_msi_ignore_mask inhibits the toggling of the mask bit for both
MSI and MSI-X entries globally, regardless of the IRQ chip they are using.
Only Xen sets the pci_msi_ignore_mask when routing physical interrupts over
event channels, to prevent PCI code from attempting to toggle the maskbit,
as it's Xen that controls the bit.
However, the pci_msi_ignore_mask being global will affect devices that use
MSI interrupts but are not routing those interrupts over event channels
(not using the Xen pIRQ chip). One example is devices behind a VMD PCI
bridge. In that scenario the VMD bridge configures MSI(-X) using the
normal IRQ chip (the pIRQ one in the Xen case), and devices behind the
bridge configure the MSI entries using indexes into the VMD bridge MSI
table. The VMD bridge then demultiplexes such interrupts and delivers to
the destination device(s). Having pci_msi_ignore_mask set in that scenario
prevents (un)masking of MSI entries for devices behind the VMD bridge.
Move the signaling of no entry masking into the MSI domain flags, as that
allows setting it on a per-domain basis. Set it for the Xen MSI domain
that uses the pIRQ chip, while leaving it unset for the rest of the
cases.
Remove pci_msi_ignore_mask at once, since it was only used by Xen code, and
with Xen dropping usage the variable is unneeded.
This fixes using devices behind a VMD bridge on Xen PV hardware domains.
Albeit Devices behind a VMD bridge are not known to Xen, that doesn't mean
Linux cannot use them. By inhibiting the usage of
VMD_FEAT_CAN_BYPASS_MSI_REMAP and the removal of the pci_msi_ignore_mask
bodge devices behind a VMD bridge do work fine when use from a Linux Xen
hardware domain. That's the whole point of the series.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-ID: <20250219092059.90850-4-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
MSI remapping bypass (directly configuring MSI entries for devices on the
VMD bus) won't work under Xen, as Xen is not aware of devices in such bus,
and hence cannot configure the entries using the pIRQ interface in the PV
case, and in the PVH case traps won't be setup for MSI entries for such
devices.
Until Xen is aware of devices in the VMD bus prevent the
VMD_FEAT_CAN_BYPASS_MSI_REMAP capability from being used when running as
any kind of Xen guest.
The MSI remapping bypass is an optional feature of VMD bridges, and hence
when running under Xen it will be masked and devices will be forced to
redirect its interrupts from the VMD bridge. That mode of operation must
always be supported by VMD bridges and works when Xen is not aware of
devices behind the VMD bridge.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-ID: <20250219092059.90850-3-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Due to pending percpu improvements in -next, GCC9 and GCC10 are
crashing during the build with:
lib/zstd/compress/huf_compress.c:1033:1: internal compiler error: Segmentation fault
1033 | {
| ^
Please submit a full bug report,
with preprocessed source if appropriate.
See <file:///usr/share/doc/gcc-9/README.Bugs> for instructions.
The DYNAMIC_BMI2 feature is a known-challenging feature of
the ZSTD library, with an existing GCC quirk turning it off
for GCC versions below 4.8.
Increase the DYNAMIC_BMI2 version cutoff to GCC 11.0 - GCC 10.5
is the last version known to crash.
Reported-by: Michael Kelley <mhklinux@outlook.com>
Debugged-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: https://lore.kernel.org/r/SN6PR02MB415723FBCD79365E8D72CA5FD4D82@SN6PR02MB4157.namprd02.prod.outlook.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Clang does not tolerate the use of non-TLS symbols for the per-CPU stack
protector very well, and to work around this limitation, the symbol
passed via the -mstack-protector-guard-symbol= option is never defined
in C code, but only in the linker script, and it is exported from an
assembly file. This is necessary because Clang will fail to generate the
correct %GS based references in a compilation unit that includes a
non-TLS definition of the guard symbol being used to store the stack
cookie.
This problem is only triggered by symbol definitions, not by
declarations, but nonetheless, the declaration in <asm/asm-prototypes.h>
is conditional on __GENKSYMS__ being #define'd, so that only genksyms
will observe it, but for ordinary compilation, it will be invisible.
This is causing problems with the genksyms alternative gendwarfksyms,
which does not #define __GENKSYMS__, does not observe the symbol
declaration, and therefore lacks the information it needs to version it.
Adding the #define creates problems in other places, so that is not a
straight-forward solution. So take the easy way out, and drop the
conditional on __GENKSYMS__, as this is not really needed to begin with.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250320213238.4451-2-ardb@kernel.org
|
|
The current hypercall interface for doing PCI device operations always uses
a segment field that has a 16 bit width. However on Linux there are buses
like VMD that hook up devices into the PCI hierarchy at segment >= 0x10000,
after the maximum possible segment enumerated in ACPI.
Attempting to register or manage those devices with Xen would result in
errors at best, or overlaps with existing devices living on the truncated
equivalent segment values. Note also that the VMD segment numbers are
arbitrarily assigned by the OS, and hence there would need to be some
negotiation between Xen and the OS to agree on how to enumerate VMD
segments and devices behind them.
Skip notifying Xen about those devices. Given how VMD bridges can
multiplex interrupts on behalf of devices behind them there's no need for
Xen to be aware of such devices for them to be usable by Linux.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250219092059.90850-2-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Since commit 4e1a7df45480 ("cpumask: Add enabled cpumask
for present CPUs that can be brought online") introduced
cpu_enabled_mask, the comment line describing the mask
has been slightly out of alignment with the adjacent
lines.
Fix this by removing a single space character.
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
A few additional definitions are required for the mshv driver code
(to follow). Introduce those here and clean up a little bit while
at it.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-10-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-10-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Add mshv_handler() to process messages related to managing guest
partitions such as intercepts, doorbells, and scheduling messages.
In a (non-nested) root partition, the same interrupt vector is shared
between the vmbus and mshv_root drivers.
Introduce a stub for mshv_handler() and call it in
sysvec_hyperv_callback alongside vmbus_handler().
Even though both handlers will be called for every Hyper-V interrupt,
the messages for each driver are delivered to different offsets
within the SYNIC message page, so they won't step on each other.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-9-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-9-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Add a pointer hv_synic_eventring_tail to track the tail pointer for the
SynIC event ring buffer for each SINT.
This will be used by the mshv driver, but must be tracked independently
since the driver module could be removed and re-inserted.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-8-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-8-git-send-email-nunodasneves@linux.microsoft.com>
|
|
hv_get_hypervisor_version(), hv_call_deposit_pages(), and
hv_call_create_vp(), are all needed in-module with CONFIG_MSHV_ROOT=m.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@microsoft.linux.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-7-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-7-git-send-email-nunodasneves@linux.microsoft.com>
|
|
node_to_pxm() is used by hv_numa_node_to_pxm_info().
That helper will be used by Hyper-V root partition module code
when CONFIG_MSHV_ROOT=m.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-6-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-6-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Factor out the check for enabling auto eoi, to be reused in root
partition code.
No functional changes.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-5-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-5-git-send-email-nunodasneves@linux.microsoft.com>
|
|
These non-nested msr and fast hypercall functions are present in x86,
but they must be available in both architectures for the root partition
driver code.
While at it, remove the redundant 'extern' keywords from the
hv_do_hypercall() variants in asm-generic/mshyperv.h.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-4-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-4-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Extend the "ms_hyperv_info" structure to include a new field,
"ext_features", for capturing extended Hyper-V features.
Update the "ms_hyperv_init_platform" function to retrieve these features
using the cpuid instruction and include them in the informational output.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1741980536-3865-3-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-3-git-send-email-nunodasneves@linux.microsoft.com>
|
|
Introduce hv_status_printk() macros as a convenience to log hypercall
errors, formatting them with the status code (HV_STATUS_*) as a raw hex
value and also as a string, which saves some time while debugging.
Create a table of HV_STATUS_ codes with strings and mapped errnos, and
use it for hv_result_to_string() and hv_result_to_errno().
Use the new hv_status_printk()s in hv_proc.c, hyperv-iommu.c, and
irqdomain.c hypercalls to aid debugging in the root partition.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Link: https://lore.kernel.org/r/1741980536-3865-2-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1741980536-3865-2-git-send-email-nunodasneves@linux.microsoft.com>
|
|
snp_set_vmsa() returns 0 as success result and so fix it.
Cc: stable@vger.kernel.org
Fixes: 44676bb9d566 ("x86/hyperv: Add smp support for SEV-SNP guest")
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250313085217.45483-1-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250313085217.45483-1-ltykernel@gmail.com>
|
|
The kernel runs as a firmware in the VTL mode, and the only way
to restart in the VTL mode on x86 is to triple fault. Thus, one
has to always supply "reboot=t" on the kernel command line in the
VTL mode, and missing that renders rebooting not working.
Define the machine restart callback to always use the triple
fault to provide the robust configuration by default.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250227214728.15672-3-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250227214728.15672-3-romank@linux.microsoft.com>
|
|
By default, X86(-64) systems use the emergecy restart routine
in the course of which the code unconditionally writes to
the physical address of 0x472 to indicate the boot mode
to the firmware (BIOS or UEFI).
When the kernel itself runs as a firmware in the VTL mode,
that write corrupts the memory of the guest upon emergency
restarting. Preserving the state intact in that situation
is important for debugging, at least.
Define the specialized machine callback to avoid that write
and use the triple fault to perform emergency restart.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250227214728.15672-2-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250227214728.15672-2-romank@linux.microsoft.com>
|
|
The union vmpacket_largest_possible_header and several structs have not
been used for a long time afaict - remove them.
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250311091634.494888-2-thorsten.blum@linux.dev
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250311091634.494888-2-thorsten.blum@linux.dev>
|
|
CONFIG_MSHV_ROOT allows kernels built to run as a normal Hyper-V guest
to exclude the root partition code, which is expected to grow
significantly over time.
This option is a tristate so future driver code can be built as a
(m)odule, allowing faster development iteration cycles.
If CONFIG_MSHV_ROOT is disabled, don't compile hv_proc.c, and stub
hv_root_partition() to return false unconditionally. This allows the
compiler to optimize away root partition code blocks since they will
be disabled at compile time.
In the case of booting as root partition *without* CONFIG_MSHV_ROOT
enabled, print a critical error (the kernel will likely crash).
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740167795-13296-4-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740167795-13296-4-git-send-email-nunodasneves@linux.microsoft.com>
|
|
If init_rapl_pmu() fails while allocating memory for "rapl_pmu" objects,
we miss freeing the "rapl_pmus" object in the error path. Fix that.
Fixes: 9b99d65c0bb4 ("perf/x86/rapl: Move the pmu allocation out of CPU hotplug")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250320100617.4480-1-dhananjay.ugwekar@amd.com
|
|
io_req_msg_cleanup() relies on the fact that io_netmsg_recycle() will
always fully recycle, but that may not be the case if the msg cache
was already full. To ensure that normal cleanup always gets run,
let io_netmsg_recycle() deal with clearing the relevant cleanup flags,
as it knows exactly when that should be done.
Cc: stable@vger.kernel.org
Reported-by: David Wei <dw@davidwei.uk>
Fixes: 75191341785e ("io_uring/net: add iovec recycling")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The `struct ttm_resource->placement` contains TTM_PL_FLAG_* flags, but
it was incorrectly tested for XE_PL_* flags.
This caused xe_dma_buf_pin() to always fail when invoked for
the second time. Fix this by checking the `mem_type` field instead.
Fixes: 7764222d54b7 ("drm/xe: Disallow pinning dma-bufs in VRAM")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: intel-xe@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218100353.2137964-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
(cherry picked from commit b96dabdba9b95f71ded50a1c094ee244408b2a8e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Now that the rstat lock is being re-acquired on every CPU iteration in
cgroup_rstat_flush_locked(), having the initially acquire the lock is
unnecessary and unclear.
Inline cgroup_rstat_flush_locked() into cgroup_rstat_flush() and move
the lock/unlock calls to the beginning and ending of the loop body to
make the critical section obvious.
cgroup_rstat_flush_hold/release() do not make much sense with the lock
being dropped and reacquired internally. Since it has no external
callers, remove it and explicitly acquire the lock in
cgroup_base_stat_cputime_show() instead.
This leaves the code with a single flushing function,
cgroup_rstat_flush().
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Restricted pointers ("%pK") are not meant to be used through printk().
It can unintentionally expose security sensitive, raw pointer values.
Use regular pointer formatting instead.
Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250217-restricted-pointers-arm64-v1-1-14bb1f516b01@linutronix.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Andrea has made significant contributions to SRv6 support in Linux.
Acknowledge the work and on-going interest in Srv6 support with a
maintainers entry for these files so hopefully he is included
on patches going forward.
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250312092212.46299-1-dsahern@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit 183185a18ff96751db52a46ccf93fff3a1f42815.
This patch broke net/forwarding/ip6gre_custom_multipath_hash.sh in some
circumstances (https://lore.kernel.org/netdev/Z9RIyKZDNoka53EO@mini-arch/).
Let's revert it while the problem is being investigated.
Fixes: 183185a18ff9 ("gre: Fix IPv6 link-local address generation.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/8b1ce738eb15dd841aab9ef888640cab4f6ccfea.1742418408.git.gnault@redhat.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit 6f50175ccad4278ed3a9394c00b797b75441bd6e.
Commit 183185a18ff9 ("gre: Fix IPv6 link-local address generation.") is
going to be reverted. So let's revert the corresponding kselftest
first.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/259a9e98f7f1be7ce02b53d0b4afb7c18a8ff747.1742418408.git.gnault@redhat.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Ensure that during a multi-threaded exec and premature thread-group
leader exit no exit notification is generated.
Link: https://lore.kernel.org/r/20250320-work-pidfs-thread_group-v4-4-da678ce805bf@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Ensure that during a multi-threaded exec and premature thread-group
leader exit no exit notification is generated.
Link: https://lore.kernel.org/r/20250320-work-pidfs-thread_group-v4-3-da678ce805bf@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add first test for premature thread-group leader exit.
Link: https://lore.kernel.org/r/20250320-work-pidfs-thread_group-v4-2-da678ce805bf@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This is another attempt trying to make pidfd polling for multi-threaded
exec and premature thread-group leader exit consistent.
A quick recap of these two cases:
(1) During a multi-threaded exec by a subthread, i.e., non-thread-group
leader thread, all other threads in the thread-group including the
thread-group leader are killed and the struct pid of the
thread-group leader will be taken over by the subthread that called
exec. IOW, two tasks change their TIDs.
(2) A premature thread-group leader exit means that the thread-group
leader exited before all of the other subthreads in the thread-group
have exited.
Both cases lead to inconsistencies for pidfd polling with PIDFD_THREAD.
Any caller that holds a PIDFD_THREAD pidfd to the current thread-group
leader may or may not see an exit notification on the file descriptor
depending on when poll is performed. If the poll is performed before the
exec of the subthread has concluded an exit notification is generated
for the old thread-group leader. If the poll is performed after the exec
of the subthread has concluded no exit notification is generated for the
old thread-group leader.
The correct behavior would be to simply not generate an exit
notification on the struct pid of a subhthread exec because the struct
pid is taken over by the subthread and thus remains alive.
But this is difficult to handle because a thread-group may exit
prematurely as mentioned in (2). In that case an exit notification is
reliably generated but the subthreads may continue to run for an
indeterminate amount of time and thus also may exec at some point.
So far there was no way to distinguish between (1) and (2) internally.
This tiny series tries to address this problem by discarding
PIDFD_THREAD notification on premature thread-group leader exit.
If that works correctly then no exit notifications are generated for a
PIDFD_THREAD pidfd for a thread-group leader until all subthreads have
been reaped. If a subthread should exec aftewards no exit notification
will be generated until that task exits or it creates subthreads and
repeates the cycle.
Co-Developed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250320-work-pidfs-thread_group-v4-1-da678ce805bf@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Previous commit 8b5c171bb3dc ("neigh: new unresolved queue limits")
introduces new netlink attribute NDTPA_QUEUE_LENBYTES to represent
approximative value for deprecated QUEUE_LEN. However, it forgot to add
the associated nla_policy in nl_ntbl_parm_policy array. Fix it with one
simple NLA_U32 type policy.
Fixes: 8b5c171bb3dc ("neigh: new unresolved queue limits")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://patch.msgid.link/20250315165113.37600-1-linma@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
fd_install() has a questionable comment above it.
While it correctly points out a possible race against dup2(), it states:
> We need to detect this and fput() the struct file we are about to
> overwrite in this case.
>
> It should never happen - if we allow dup2() do it, _really_ bad things
> will follow.
I have difficulty parsing the above. The first sentence would suggest
fd_install() tries to detect and recover from the race (it does not),
the next one claims the race needs to be dealt with (it is, by dup2()).
Given that fd_install() does not suffer the burden, this patch removes
the above and instead expands on the race in dup2() commentary.
While here tidy up the docs around fd_install().
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250320102637.1924183-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Flag IOMAP_ATOMIC_SW is not really required. The idea of having this flag
is that the FS ->iomap_begin callback could check if this flag is set to
decide whether to do a SW (FS-based) atomic write. But the FS can set
which ->iomap_begin callback it wants when deciding to do a FS-based
atomic write.
Furthermore, it was thought that IOMAP_ATOMIC_HW is not a proper name, as
the block driver can use SW-methods to emulate an atomic write. So change
back to IOMAP_ATOMIC.
The ->iomap_begin callback needs though to indicate to iomap core that
REQ_ATOMIC needs to be set, so add IOMAP_F_ATOMIC_BIO for that.
These changes were suggested by Christoph Hellwig and Dave Chinner.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250320120250.4087011-4-john.g.garry@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
Hans de Goede
Paul Menzel
Diogo Ivo
Linus Torvalds
Darrick J. Wong
Pavel Begunkov
David Howells
Josh Poimboeuf
Namhyung Kim
Wei Liu
Michael Kelley
Nuno Das Neves
John Stultz
Roger Pau Monne
Ingo Molnar
Ard Biesheuvel
Joel Savitz
Stanislav Kinsburskii
Tianyu Lan
Roman Kisel
Thorsten Blum
Dhananjay Ugwekar
Jens Axboe
Tomasz Rusinowicz
Yosry Ahmed
Thomas Weißschuh
David Ahern
Guillaume Nault
Christian Brauner
Lin Ma
Mateusz Guzik
John Garry