| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This has been a source of confusion. Make it debug only.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So the selected forced level shows up properly in sysfs.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is necessary to properly reset the min/max limits before
clamping them otherwise we may get improper clamping depending
on what what was the last forced level.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Always respect the harvest configuration as is.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v2: squash in later fix
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If we run into a part with a harvest configuration where the entire
IP block is unusable, just disable the IP block.
v2: fix logic as noted by Christian
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
|
|
Just to make sure userspace don't send nonsense to the kernel.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
|
|
Port of amdgpu patch 9298e52f8b51d1e4acd68f502832f3a97f8cf892.
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This can be the case when the GPU is powered off, e.g. via vgaswitcheroo
or runpm. When the GPU is powered up again, radeon_gart_table_vram_pin
flushes the TLB after setting rdev->gart.ptr to non-NULL.
Fixes panic on powering off R7xx GPUs.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61529
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=76490
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
We're not supposed to store the adjusted mode into crtc->mode. We don't
use it anyway, so we can safely remove this.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Fix the start address calculation when overlay is partially off screen.
fb->bits_per_pixel is not set for YUV formats, and is always zero, which
led to the first component always starting at zero.
Use drm_format_plane_cpp() instead.
This also revealed a problem in that YUYV formats toggle the U/V data
for odd pixel start address offsets. We try to rectify that by
toggling the U/V swap, which for the most part works, but seemingly
introduces a flicker for one scan frame of swapped U/V.
However, these changes result in an overall improvement.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Use drm_plane_helper_check_update() rather than our own code to validate
and limit the size of the displayed image. As we are able to support
scaling, permit the full scaling ability.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Fix the gem object freeing after a partial import of a dma buffer,
eg, one which has been imported, but not mapped. This was provoking
a warning from the dma_buf code.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
The Armada overlay plane wasn't being properly cleaned up as it was
missing a call to drm_plane_cleanup(). It also wasn't freeing the
right type of pointer (although we were still freeing the right
pointer value.)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Nothing was waking up the overlay plane wait queue, so we were fully
reliant on the HZ/25 wait timing out to make progress. Fix the lack
of wake-up.
We were also mis-handling the wait_event_timeout() return value - this
returns an unsigned integer of the remaining time, or zero on timeout
and the condition evaluated false. Checking this for less than zero
is not sane.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Frame buffer modifiers extensions provided in;
commit e3eb3250d84ef97b766312345774367b6a310db8
Author: Rob Clark <robdclark@gmail.com>
Date: Thu Feb 5 14:41:52 2015 +0000
drm: add support for tiled/compressed/etc modifier in addfb2
Missed the structure packing/alignment problem where 64-bit
members were added after the odd number of 32-bit ones. This
makes the compiler produce structures of different sizes under
32- and 64-bit x86 targets and makes the ioctl need explicit
compat handling.
v2: Removed the typedef. (Daniel Vetter)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Rob Clark <robdclark@gmail.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: stable@vger.kernel.org
[danvet: Squash in compile fix from Mika.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Destroy ocrdma_dev_id IDR on module exit, reclaiming the allocated memory.
This was detected by the following semantic patch (written by Luis Rodriguez
<mcgrof@suse.com>)
<SmPL>
@ defines_module_init @
declarer name module_init, module_exit;
declarer name DEFINE_IDR;
identifier init;
@@
module_init(init);
@ defines_module_exit @
identifier exit;
@@
module_exit(exit);
@ declares_idr depends on defines_module_init && defines_module_exit @
identifier idr;
@@
DEFINE_IDR(idr);
@ on_exit_calls_destroy depends on declares_idr && defines_module_exit @
identifier declares_idr.idr, defines_module_exit.exit;
@@
exit(void)
{
...
idr_destroy(&idr);
...
}
@ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @
identifier declares_idr.idr, defines_module_exit.exit;
@@
exit(void)
{
...
+idr_destroy(&idr);
}
</SmPL>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Destroy multcast_idr on module exit, reclaiming the allocated memory.
This was detected by the following semantic patch (written by Luis Rodriguez
<mcgrof@suse.com>)
<SmPL>
@ defines_module_init @
declarer name module_init, module_exit;
declarer name DEFINE_IDR;
identifier init;
@@
module_init(init);
@ defines_module_exit @
identifier exit;
@@
module_exit(exit);
@ declares_idr depends on defines_module_init && defines_module_exit @
identifier idr;
@@
DEFINE_IDR(idr);
@ on_exit_calls_destroy depends on declares_idr && defines_module_exit @
identifier declares_idr.idr, defines_module_exit.exit;
@@
exit(void)
{
...
idr_destroy(&idr);
...
}
@ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @
identifier declares_idr.idr, defines_module_exit.exit;
@@
exit(void)
{
...
+idr_destroy(&idr);
}
</SmPL>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
There is little chance our memory allocation will fail, so we can
combine initializing the work structs with allocating them instead of
looping through all of them once to allocate and again to initialize.
Then when we need to actually find out if our device is up or in the
process of going down, have all of our work structs batched up, take the
spin_lock once and only once, and do all of the batch under the one
spin_lock invocation instead of incurring all of the locked memory cycles
we would otherwise incur to take/release the spin_lock over and over
again.
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
We create a number of work structs to be queued up to a workqueue, and
on completion of the workqueue handler, the workqueue handler frees the
allocated memory. If, however, we don't queue the work struct because
the device is going down, then we need to free the memory ourselves.
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
On failure, we loop through all possible pointers and test them before
calling kfree. But really, why even attempt to free items we didn't
allocate when we can easily loop through exactly and only the devices
for which the original memory allocation succeeded and free just those.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
For IB links, reading HCA flow counters through iboe_process_mad() should
be used when mlx4_ib_process_mad() is invoked only for VFs PMA queries and
exactly nothing else.
Fixes: 7193a141eb74 ('IB/mlx4: Set VF to read from QP counters')
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
In little endian cases, the macros be16_to_cpu and cpu_to_be64
unfolds to __swab{16,64} which provides special case for constants.
In big endian cases, __constant_be16_to_cpu and be16_to_cpu
expand directly to the same expression. The same applies for
__constant_cpu_to_be64 and cpu_to_be64.
So, replace __constant_be16_to_cpu with be16_to_cpu and
__constant_cpu_to_be64 with cpu_to_be64, with the goal of getting
rid of the definition of __constant_be16_to_cpu and
__constant_cpu_to_be64 completely.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When switching between modes (datagram / connected) change the MTU
accordingly.
datagram mode up to 4K, connected mode up to (64K - 0x10).
Signed-off-by: ELi Cohen <eli@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
By default, IPoIB-CM driver uses 64k MTU. Larger MTU gives better
performance.
This MTU plus overhead puts the memory allocation for IP based packets at
32 4k pages (order 5), which have to be contiguous.
When the system memory under pressure, it was observed that allocating 128k
contiguous physical memory is difficult and causes serious errors (such as
system becomes unusable).
This enhancement resolve the issue by removing the physically contiguous
memory requirement using Scatter/Gather feature that exists in Linux stack.
With this fix Scatter-Gather will be supported also in connected mode.
This change reverts some of the change made in commit e112373fd6aa
("IPoIB/cm: Reduce connected mode TX object size").
The ability to use SG in IPoIB CM is possible because the coupling
between NETIF_F_SG and NETIF_F_CSUM was removed in commit
ec5f06156423 ("net: Kill link between CSUM and SG features.")
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Christian Marie <christian@ponies.io>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
ib_ucm_release_dev clears the wrong bit if devnum is greater
than IB_UCM_MAX_DEVICES.
Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
__ipoib_ib_dev_flush calls itself recursively on child devices, and lockdep
complains about locking vlan_rwsem twice (see below). Use down_read_nested
instead of down_read to prevent the warning.
=============================================
[ INFO: possible recursive locking detected ]
4.1.0-rc4+ #36 Tainted: G O
---------------------------------------------
kworker/u20:2/261 is trying to acquire lock:
(&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib]
but task is already holding lock:
(&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&priv->vlan_rwsem);
lock(&priv->vlan_rwsem);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by kworker/u20:2/261:
#0: ("%s""ipoib_flush"){.+.+..}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760
#1: ((&priv->flush_heavy)){+.+...}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760
#2: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib]
stack backtrace:
CPU: 3 PID: 261 Comm: kworker/u20:2 Tainted: G O 4.1.0-rc4+ #36
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007
Workqueue: ipoib_flush ipoib_ib_dev_flush_heavy [ib_ipoib]
ffff8801c6c54790 ffff8801c9927af8 ffffffff81665238 0000000000000001
ffffffff825b5b30 ffff8801c9927bd8 ffffffff810bba51 ffff880100000000
ffffffff00000001 ffff880100000001 ffff8801c6c55428 ffff8801c6c54790
Call Trace:
[<ffffffff81665238>] dump_stack+0x4f/0x6f
[<ffffffff810bba51>] __lock_acquire+0x741/0x1820
[<ffffffff810bcbf8>] lock_acquire+0xc8/0x240
[<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib]
[<ffffffff81669d2c>] down_read+0x4c/0x70
[<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib]
[<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib]
[<ffffffffa0791e4a>] __ipoib_ib_dev_flush+0x5a/0x2b0 [ib_ipoib]
[<ffffffffa07920ba>] ipoib_ib_dev_flush_heavy+0x1a/0x20 [ib_ipoib]
[<ffffffff81082871>] process_one_work+0x201/0x760
[<ffffffff810827cc>] ? process_one_work+0x15c/0x760
[<ffffffff81082ef0>] worker_thread+0x120/0x4d0
[<ffffffff81082dd0>] ? process_one_work+0x760/0x760
[<ffffffff81082dd0>] ? process_one_work+0x760/0x760
[<ffffffff81088b7e>] kthread+0xfe/0x120
[<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70
[<ffffffff8166c6e2>] ret_from_fork+0x42/0x70
[<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The ucma_lock_files() locks the mut mutex on two files, e.g. for migrating
an ID. Use mutex_lock_nested() to prevent the warning below.
=============================================
[ INFO: possible recursive locking detected ]
4.1.0-rc6-hmm+ #40 Tainted: G O
---------------------------------------------
pingpong_rpc_se/10260 is trying to acquire lock:
(&file->mut){+.+.+.}, at: [<ffffffffa047ac55>] ucma_migrate_id+0xc5/0x248 [rdma_ucm]
but task is already holding lock:
(&file->mut){+.+.+.}, at: [<ffffffffa047ac4b>] ucma_migrate_id+0xbb/0x248 [rdma_ucm]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&file->mut);
lock(&file->mut);
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by pingpong_rpc_se/10260:
#0: (&file->mut){+.+.+.}, at: [<ffffffffa047ac4b>] ucma_migrate_id+0xbb/0x248 [rdma_ucm]
stack backtrace:
CPU: 0 PID: 10260 Comm: pingpong_rpc_se Tainted: G O 4.1.0-rc6-hmm+ #40
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007
ffff8801f85b63d0 ffff880195677b58 ffffffff81668f49 0000000000000001
ffffffff825cbbe0 ffff880195677c38 ffffffff810bb991 ffff880100000000
ffff880100000000 ffff880100000001 ffff8801f85b7010 ffffffff8121bee9
Call Trace:
[<ffffffff81668f49>] dump_stack+0x4f/0x6e
[<ffffffff810bb991>] __lock_acquire+0x741/0x1820
[<ffffffff8121bee9>] ? dput+0x29/0x320
[<ffffffff810bcb38>] lock_acquire+0xc8/0x240
[<ffffffffa047ac55>] ? ucma_migrate_id+0xc5/0x248 [rdma_ucm]
[<ffffffff8166b901>] ? mutex_lock_nested+0x291/0x3e0
[<ffffffff8166b6d5>] mutex_lock_nested+0x65/0x3e0
[<ffffffffa047ac55>] ? ucma_migrate_id+0xc5/0x248 [rdma_ucm]
[<ffffffff810baeed>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff8166b66e>] ? mutex_unlock+0xe/0x10
[<ffffffffa047ac55>] ucma_migrate_id+0xc5/0x248 [rdma_ucm]
[<ffffffffa0478474>] ucma_write+0xa4/0xb0 [rdma_ucm]
[<ffffffff81200674>] __vfs_write+0x34/0x100
[<ffffffff8112427c>] ? __audit_syscall_entry+0xac/0x110
[<ffffffff810ec055>] ? current_kernel_time+0xc5/0xe0
[<ffffffff812aa4d3>] ? security_file_permission+0x23/0x90
[<ffffffff8120088d>] ? rw_verify_area+0x5d/0xe0
[<ffffffff812009bb>] vfs_write+0xab/0x120
[<ffffffff81201519>] SyS_write+0x59/0xd0
[<ffffffff8112427c>] ? __audit_syscall_entry+0xac/0x110
[<ffffffff8166ffee>] system_call_fastpath+0x12/0x76
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Fixes: 3e0249f9c05c ("RDS/IB: add refcount tracking to struct rds_ib_device")
There lacks a dropping on rds_ib_device.refcount in case rds_ib_alloc_fmr
failed(mr pool running out). this lead to the refcount overflow.
A complain in line 117(see following) is seen. From vmcore:
s_ib_rdma_mr_pool_depleted is 2147485544 and rds_ibdev->refcount is -2147475448.
That is the evidence the mr pool is used up. so rds_ib_alloc_fmr is very likely
to return ERR_PTR(-EAGAIN).
115 void rds_ib_dev_put(struct rds_ib_device *rds_ibdev)
116 {
117 BUG_ON(atomic_read(&rds_ibdev->refcount) <= 0);
118 if (atomic_dec_and_test(&rds_ibdev->refcount))
119 queue_work(rds_wq, &rds_ibdev->free_work);
120 }
fix is to drop refcount when rds_ib_alloc_fmr failed.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Fix for incorrect recording of the MAC address
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Neighbor resolution doesn't work without this fix
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Fixes to allow clients to make remove mapping requests, after
they have provided the user space service with the mapping
information, they are using when the service is restarted.
1) Adding IWPM_REG_VALID, IWPM_REG_INCOMPL and IWPM_REG_UNDEF
registration types for the port mapper clients and functions
to set/check the registration type.
2) If the port mapper user space service is not available to register
the client, then its registration stays IWPM_REG_UNDEF and the
registration isn't checked until the service becomes available
(no mappings are possible, if the user space service isn't running).
3) After the service is restarted, the user space port mapper pid is set
to valid and the client registration is set to IWPM_REG_INCOMPL
to allow the client to make remove mapping requests.
Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Error values of ib_query_port() and ib_query_device() weren't propagated
correctly. Because of that, ipoib_add_port() could return NULL value,
which escaped the IS_ERR() check in ipoib_add_one() and we crashed.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
mlx4 VFs can provide CQE raw time-stamping services, but they
don't have the hca core clock mapped to their PCI bars.
As such, we should not attempt to query and report the clock offset
to user space for VFs. Doing so causes query_device over VFs to fail
with -ENOSUPP.
Fixes: 4b664c4355b2 ('IB/mlx4: Add support for CQ time-stamping')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Whenever ib_cm gets remove_one call, like when there is a hot-unplug
event, the driver should mark itself as going_down and confirm that no
new works are going to be queued for that device.
so, the order of the actions are:
1. mark the going_down bit.
2. flush the wq.
3. [make sure no new works for that device.]
4. unregister mad agent.
otherwise, works that are already queued can be scheduled after the mad
agent was freed.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
We might return res which is not initialized. Also
reduce code duplication by exporting srp_parse_tmo so
srp_tmo_set can reuse it.
Detected by Coverity.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jenny Falkovich <jennyf@mellanox.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
In little endian cases, the macro cpu_to_be{16,32,64} unfolds to
__swab{16,32,64} which provides special case for constants. In
big endian cases, __constant_cpu_to_be{16,32,64} and
cpu_to_be{16,32,64} expand directly to the same expression. So,
replace __constant_cpu_to_be{16,32,64} with cpu_to_be{16,32,64}
with the goal of getting rid of the definitions of
__constant_cpu_to_be{16,32,64} completely.
The Coccinelle semantic patch that performs this transformation
is as follows:
@@expression x;@@
(
- __constant_cpu_to_be16(x)
+ cpu_to_be16(x)
|
- __constant_cpu_to_be32(x)
+ cpu_to_be32(x)
|
- __constant_cpu_to_be64(x)
+ cpu_to_be64(x)
)
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
We recently added BUG_ON's which were inappropriate for a condition which
should never happen. Change these to be WARN_ON_ONCE as a debugging aid.
Fixes: 4cd7c9479aff ('IB/mad: Add support for additional MAD info to/from drivers')
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The define OPA_LID_PERMISSIVE is big endian and was compared to the
cpu endian variable opa_drslid.
Problem caught by 0-day build infrastructure.
Fixes: 8e4349d13f33 (IB/mad: Add final OPA MAD processing)
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: John, Jubin <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Persuant to Liran's comments on node_type on linux-rdma
mailing list:
In an effort to reform the RDMA core and ULPs to minimize use of
node_type in struct ib_device, an additional bit is added to
struct ib_device for is_switch (IB switch). This is needed
to be initialized by any IB switch device driver. This is a
NEW requirement on such device drivers which are all
"out of tree".
In addition, an ib_switch helper was added to ib_verbs.h
based on the is_switch device bit rather than node_type
(although those should be consistent).
The RDMA core (MAD, SMI, agent, sa_query, multicast, sysfs)
as well as (IPoIB and SRP) ULPs are updated where
appropriate to use this new helper. In some cases,
the helper is now used under the covers of using
rdma_[start end]_port rather than the open coding
previously used.
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When resuming with dpms off, the following warn can happen:
[ 118.334082] ------------[ cut here ]------------
[ 118.334105] WARNING: CPU: 2 PID: 2274 at drivers/gpu/drm/i915/intel_display.c:6319 __intel_set_mode+0xae5/0xb90 [i915]()
[ 118.334106] WARN_ON(!crtc->state->enable)
[ 118.334137] Modules linked in: i915
[ 118.334139] CPU: 2 PID: 2274 Comm: kworker/u16:117 Not tainted 4.2.0-rc2-fixes+ #4148
[ 118.334140] Hardware name: LENOVO 2349AV8/2349AV8, BIOS G1ETA5WW (2.65 ) 04/15/2014
[ 118.334144] Workqueue: events_unbound async_run_entry_fn
[ 118.334147] ffffffffc017eef0 ffff8800ada93998 ffffffff817aa62a 0000000080000001
[ 118.334149] ffff8800ada939e8 ffff8800ada939d8 ffffffff810807e1 ffff8800ada939c8
[ 118.334151] ffff8800cea3b3d8 0000000000000000 ffff8800ad86b008 ffff880117705668
[ 118.334151] Call Trace:
[ 118.334155] [<ffffffff817aa62a>] dump_stack+0x4f/0x7b
[ 118.334157] [<ffffffff810807e1>] warn_slowpath_common+0x81/0xc0
[ 118.334158] [<ffffffff81080861>] warn_slowpath_fmt+0x41/0x50
[ 118.334173] [<ffffffffc0120375>] __intel_set_mode+0xae5/0xb90 [i915]
[ 118.334188] [<ffffffffc0121312>] ? intel_modeset_compute_config+0x52/0xb40 [i915]
[ 118.334191] [<ffffffff8144de53>] ? drm_atomic_set_fb_for_plane+0x63/0x80
[ 118.334205] [<ffffffffc01269d9>] intel_set_mode+0x29/0x60 [i915]
[ 118.334219] [<ffffffffc012730a>] intel_crtc_restore_mode+0x13a/0x1f0 [i915]
[ 118.334232] [<ffffffffc0101160>] ? gen6_write16+0x250/0x250 [i915]
[ 118.334246] [<ffffffffc01283ec>] intel_modeset_setup_hw_state+0x89c/0xcd0 [i915]
[ 118.334248] [<ffffffff8137d260>] ? pci_pm_thaw+0x90/0x90
[ 118.334255] [<ffffffffc00ac11b>] i915_drm_resume+0xcb/0x160 [i915]
[ 118.334262] [<ffffffffc00ac1d2>] i915_pm_resume+0x22/0x30 [i915]
[ 118.334263] [<ffffffff8137d2c3>] pci_pm_resume+0x63/0xa0
[ 118.334266] [<ffffffff81467550>] dpm_run_callback+0x70/0x420
[ 118.334267] [<ffffffff81467cbd>] device_resume+0x9d/0x1c0
[ 118.334269] [<ffffffff814673d0>] ? initcall_debug_start+0x60/0x60
[ 118.334270] [<ffffffff81467dfc>] async_resume+0x1c/0x50
[ 118.334271] [<ffffffff810a6a94>] async_run_entry_fn+0x34/0xd0
[ 118.334273] [<ffffffff8109d4ad>] process_one_work+0x1dd/0x7e0
[ 118.334275] [<ffffffff8109d41a>] ? process_one_work+0x14a/0x7e0
[ 118.334276] [<ffffffff8109daf9>] worker_thread+0x49/0x450
[ 118.334278] [<ffffffff8109dab0>] ? process_one_work+0x7e0/0x7e0
[ 118.334280] [<ffffffff810a3cb9>] kthread+0xf9/0x110
[ 118.334282] [<ffffffff810a3bc0>] ? insert_kthread_work+0x90/0x90
[ 118.334284] [<ffffffff817b414f>] ret_from_fork+0x3f/0x70
[ 118.334286] [<ffffffff810a3bc0>] ? insert_kthread_work+0x90/0x90
[ 118.334287] ---[ end trace 01f2cf6371b82d7a ]---
This warn is harmless, and can be fixed by not calling intel_crtc_disable when
the crtc is already disabled.
Reported-and-Tested-by: Jörg Otte <jrg.otte@gmail.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This reverts commit 19ee835cdb0b5a8eb11a68f25a51b8039d564488.
It breaks existing old userspace which doesn't handle UNKNOWN
swizzling correct. Yes UNKNOWN was a thing back in 2009 and probably
still is on some other platforms, but it still pretty clearly broke
the testers machine. If we want this we need to extend the ioctl with
new paramters that only new userspace looks at.
Cc: Harald Arnesen <harald@skogtun.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Harald Arnesen <harald@skogtun.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Previously only core DRM ioctls under the DRM_COMMAND_BASE were being
forwarded, but the drm.h header suggests (and reality confirms) ones
after (and including) DRM_COMMAND_END should be forwarded as well.
We need this to correctly forward the compat ioctl for the botched-up
addfb2.1 extension.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: stable@vger.kernel.org # 4.1+
[danvet: Explain why this is suddenly needed and add cc: stable.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
At least some versions of AMI BIOS have corrupted contents in the TPM2
ACPI table and namely the physical address of the control area is set to
zero.
This patch changes the driver to fail gracefully when we observe a zero
address instead of continuing to ioremap.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
|
|
When a cdev is contained in a dynamic structure the cdev parent kobj
should be set to the kobj that controls the lifetime of the enclosing
structure. In TPM's case this is the embedded struct device.
Also, cdev_init 0's the whole structure, so all sets must be after,
not before. This fixes module ref counting and cdev.
Cc: <stable@vger.kernel.org>
Fixes: 313d21eeab92 ("tpm: device class for tpm")
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
|
|
On Sun, Jul 12, 2015 at 09:52:51AM -0700, Linus Torvalds wrote:
> On Sun, Jul 12, 2015 at 1:03 AM, Jörg Otte <jrg.otte@gmail.com> wrote:
> > BUG: unable to handle kernel NULL pointer dereference at 0000000000000009
> > IP: [<ffffffffbd3447bb>] 0xffffffffbd3447bb
>
> Ugh. Please enable KALLSYMS to get sane symbols.
>
> But yes, "crtc_state->base.active" is at offset 9 from "crtc_state",
> so it's pretty clearly just that change frm
>
> - if (intel_crtc->active) {
> + if (crtc_state->base.active) {
>
> and "crtc_state" is NULL.
>
> And the code very much knows that crtc_state can be NULL, since it's
> initialized with
>
> crtc_state = state->base.state ?
> intel_atomic_get_crtc_state(state->base.state,
> intel_crtc) : NULL;
>
> Tssk. Daniel? Should I just revert that commit dec4f799d0a4
> ("drm/i915: Use crtc_state->active in primary check_plane func") for
> now, or is there a better fix? Like just checking crtc_state for NULL?
Indeed embarrassing. I've missed that we still have 1 caller left that's
using the transitional helpers, and those don't fill out
plane_state->state backpointers to the global atomic update since there is
no global atomic update for transitional helpers. Below diff should fix
this - we need to preferentially check crts_state->active and if that's
not set intel_crtc->active should yield the right result for the one
remaining caller (it's in the crtc_disable paths).
This fixes a regression introduced in
commit dec4f799d0a4c9edae20512fa60b0a36f3299ca2
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Jul 7 11:15:47 2015 +0200
drm/i915: Use crtc_state->active in primary check_plane func
which was quickly reverted in
commit 01e2d0627a9a6edb24c37db45db5ecb31e9de808
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun Jul 12 15:00:20 2015 -0700
Revert "drm/i915: Use crtc_state->active in primary check_plane func"
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jörg Otte <jrg.otte@gmail.com>
Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
After the previous patch this flag will check always clear, as it's
never set for shmem backed and userptr objects, so we can remove it.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Yeah this isn't really fixes but it's a nice cleanup to
clarify the code but not really worth the hassle of backmerging. So
just add to -fixes, we're still early in -rc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
Alex Deucher
Christian König
Michel Dänzer
Russell King
Tvrtko Ursulin
Johannes Thumshirn
Doug Ledford
Maninder Singh
Or Gerlitz
Vaishali Thakkar
Erez Shitrit
Yuval Shaia
Carol L Soto
Haggai Eran
Wengang Wang
Tatyana Nikolova
Amir Vadai
Matan Barak
Sagi Grimberg
Ira Weiny
Hal Rosenstock
Maarten Lankhorst
Daniel Vetter
Jarkko Sakkinen
Jason Gunthorpe
Daniel Vetter
Imre Deak