| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Dtschema expects GPIO hogs to end with a "hog" suffix.
Also, the convention for node names is to use hyphens, not underscores.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/972d982024cbb04dcf29b2a0ac6beaf41e66c363.1645705927.git.geert+renesas@glider.be
|
|
Dtschema expects GPIO hogs to end with a "hog" suffix.
Also, the convention for node names is to use hyphens, not underscores.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/baee4b9980576ffbab24122fce7147c9cbc2ea59.1645705998.git.geert+renesas@glider.be
|
|
Enable watchdog{0, 1, 2} interfaces on RZ/G2LC SMARC EVK.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220223165813.24833-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
60s is a sensible default value.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Link: https://lore.kernel.org/r/20220221095032.95054-5-jjhiblot@traphandler.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
This SoC includes 2 watchdog controllers (one per A7 core).
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Link: https://lore.kernel.org/r/20220221095032.95054-4-jjhiblot@traphandler.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
This clock is actually the REF_SYNC_D8 clock.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220221095032.95054-2-jjhiblot@traphandler.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
dtschema expects PWM node name to be a generic "pwm". This also matches
Devicetree specification requirements about generic node names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220214081916.162014-5-krzysztof.kozlowski@canonical.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable the Rockchip RK809 audio codec on the Rockchip RK3568
EVB1-V10. This requires the VCCIO_ACODEC voltage regulator to be set
to always on.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220222175004.1308990-2-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
As discussed in [0], the Rockchip power domain driver does not consider
the external supplies (such as VDD_GPU on the RK3568 EVB1). In the scope of
this discussion it has been pointed out that turning this voltage on/off
on the fly is not explicitly supported. This patch follows the other RK356x
boards by example and sets the vdd_gpu regulator to always on.
[0] https://lore.kernel.org/linux-rockchip/20211217130919.3035788-1-s.hauer@pengutronix.de/
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220223112008.1316132-1-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The TCS4525 voltage regulator provides the vdd_cpu on the Rockchip
RK3568 EVB1. Add the device tree node and connect it to the CPU
nodes.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220223162054.1626257-1-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable the blue work LED on the Rockchip RK3568 EVB1-V10.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220222175004.1308990-1-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable the watchdog timer on the Spider board.
Extracted from a larger patch in the BSP by LUU HOAI.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/b36b2bb5770e10d906571721a3d73ca205b6f56e.1642525158.git.geert+renesas@glider.be
|
|
Add a device node for the RCLK Watchdog Timer (RWDT) on the Renesas
R-Car S4-8 (R8A779F0) SoC.
Extracted from a larger patch in the BSP by LUU HOAI.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/556a7f41bdadceecbe8b59b79ac7e9f592ca17a2.1642525158.git.geert+renesas@glider.be
|
|
In the i.MX6QP sabresd board(sch-28857) design, one external oscillator
is powered up by vgen3 and used as the PCIe reference clock source by
the endpoint device.
If RC uses this oscillator as reference clock too, PLL6(ENET PLL) would
has to be in bypass mode, and ENET clocks would be messed up.
To keep things simple, let RC use the internal PLL as reference clock
and set vgen3 always on to enable the external oscillator for endpoint
device on i.MX6QP sabresd board.
NOTE: This reference clock setup is used to pass the GEN2 TX compliance
tests, and isn't recommended as a setup in the end-user design.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
While Juno's SCP firmware initially spoke the SCPI protocol, binary
releases since 2018, and the newer open-source codebase, only speak SCMI
and thus aren't particularly compatibile with the DTs we currently have
upstream. Add a parallel set of variant DTs for boards with up-to-date
firmware, replacing the SCPI parts with their new SCMI equivalents.
Link: https://lore.kernel.org/r/f3516815104f951a05fc0f799681f77d7968f6ac.1645125063.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The Renesas ARM ports do have their own IRC channel #renesas-soc (initially
created on Freenode, then moved to Liberta.Chat). Hopefully, adding it to
this file will attract more people... :-)
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/6c08e98f-c7bb-9d95-5032-69022e43e39b@omp.ru
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The Renesas ARM ports do have their own IRC channel #renesas-soc (initially
created on Freenode, then moved to Liberta.Chat). Hopefully, adding it to
this file will attract more people... :-)
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/2f108f63-0cf7-cc4c-462e-ec63736234cf@omp.ru
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Fix comment referencing salvator board, likely a copy-paste leftover.
ulcb-kf.dtsi has nothing to do with salvator.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Fixes: 80c07701d5918928 ("arm64: dts: renesas: ulcb-kf: add pcm3168 sound codec")
Link: https://lore.kernel.org/r/20220216181003.114049-1-nikita.yoush@cogentembedded.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The OSMC Vero 4K+ device is based on the Amlogic S905D (P230)
reference design with the following specifications:
- 2GB DDR4 RAM
- 16GB eMMC
- HDMI 2.1 video
- S/PDIF optical output
- AV output
- 10/100/1000 Ethernet
- AP6255 Wireless (802.11 a/b/g/n/ac, BT 4.2)
- 2x USB 2.0 ports (1x OTG)
- IR receiver (internal)
- IR extender port (external)
- 1x micro SD card slot
- 1x Power LED (red)
- 1x Reset button (in AV jack)
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Chad Wagner <wagnerch42@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220211105311.30320-4-christianshewitt@gmail.com
|
|
Add the board binding for the OSMC Vero 4K+ STB device
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220211105311.30320-3-christianshewitt@gmail.com
|
|
Open Source Media Centre (Sam Nazarko Trading Ltd.) are a manufacturer
of Linux Set-Top Box devices.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220211105311.30320-2-christianshewitt@gmail.com
|
|
Set the usdhc root clock to 400MHz to be able to support
HS400/HS400ES modes for eMMC on phyCORE-i.MX8MP SoM.
Signed-off-by: Jonas Kuenstler <j.kuenstler@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
LDO4 is not connected so disable it. And LDO5 is used for VSEL of
the NVCC_SD2 SD-Card bus. Having it disabled seems not to have an
impact on the functionality. We enable it, as it is used.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add bindings for VDD_ARM (BUCK2) run and standby voltage.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
To be able to trigger a reset also from an external source we
need to configure the WDOG pin as open drain.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Reduce drive strength on fec tx lines for signal quality improvements.
Measurements showed that TD0 and TD1 require X4 and the other lines
X2 for optimized settings.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Set eMMC drive strength for USDHC3_DATA lines (200Mhz)
to X4 for signal improvement.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
To fit spec requirements set minimum output impedance for dp83867
ethernet phy.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the RaspberryPi Camera v2 which is an IMX219 8MP module:
- https://datasheets.raspberrypi.com/camera/camera-v2-schematics.pdf
- has its own on-board 24MHz osc so no clock required from baseboard
- pin 11 enables 1.8V and 2.8V LDO which is connected to
GW73xx MIPI_GPIO4 (IMX8MM GPIO1_IO1) so we use this as a gpio
Support is added via a device-tree overlay.
The IMX219 supports RAW8/RAW10 image formats.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the RaspberryPi Camera v2 which is an IMX219 8MP module:
- https://datasheets.raspberrypi.com/camera/camera-v2-schematics.pdf
- has its own on-board 24MHz osc so no clock required from baseboard
- pin 11 enables 1.8V and 2.8V LDO which is connected to
GW73xx MIPI_GPIO4 (IMX8MM GPIO1_IO1) so we use this as a gpio
controlled regulator enable.
Support is added via a device-tree overlay.
The IMX219 supports RAW8/RAW10 image formats.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The imx8mm-venice-gw72xx-0x som+baseboard combination has a multi-protocol
RS-232/RS-485/RS-422 transceiver to an off-board connector which
can be configured in a number of ways via UART and GPIO configuration.
The default configuration per the imx8mm-venice-gw72xx-0x dts is for
UART2 TX/RX and UART4 TX/RX to be available as RS-232:
J15.1 UART2 TX out
J15.2 UART2 RX in
J15.3 UART4 TX out
J15.4 UART4 RX in
J15.5 GND
Add dt overlays to allow additional the modes of operation:
rs232-rts (UART2 RS-232 with RTS/CTS hardware flow control)
J15.1 TX out
J15.2 RX in
J15.3 RTS out
J15.4 CTS in
J15.5 GND
rs485 (UART2 RS-485 half duplex)
J15.1 TXRX-
J15.2 N/C
J15.3 TXRX+
J15.4 N/C
J15.5 GND
rs422 (UART2 RS-422 full duplex)
J15.1 TX-
J15.2 RX+
J15.3 TX+
J15.4 RX-
J15.5 GND
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The imx8mm-venice-gw73xx-0x som+baseboard combination has a multi-protocol
RS-232/RS-485/RS-422 transceiver to an off-board connector which
can be configured in a number of ways via UART and GPIO configuration.
The default configuration per the imx8mm-venice-gw73xx-0x dts is for
UART2 TX/RX and UART4 TX/RX to be available as RS-232:
J15.1 UART2 TX out
J15.2 UART2 RX in
J15.3 UART4 TX out
J15.4 UART4 RX in
J15.5 GND
Add dt overlays to allow additional the modes of operation:
rs232-rts (UART2 RS-232 with RTS/CTS hardware flow control)
J15.1 TX out
J15.2 RX in
J15.3 RTS out
J15.4 CTS in
J15.5 GND
rs485 (UART2 RS-485 half duplex)
J15.1 TXRX-
J15.2 N/C
J15.3 TXRX+
J15.4 N/C
J15.5 GND
rs422 (UART2 RS-422 full duplex)
J15.1 TX-
J15.2 RX+
J15.3 TX+
J15.4 RX-
J15.5 GND
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The GW7903 is based on the i.MX 8M Mini SoC featuring:
- LPDDR4 DRAM
- eMMC FLASH
- microSD connector with UHS support
- LIS2DE12 3-axis accelerometer
- Gateworks System Controller
- IMX8M FEC
- software selectable RS232/RS485/RS422 serial transceiver
- PMIC
- 2x off-board bi-directional opto-isolated digital I/O
- 1x M.2 A-E Key Socket and 1x MiniPCIe socket with USB2.0 and PCIe
(resistor loading to route PCIe/USB2 between M.2 and MiniPCIe socket)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The GW7903 is based on the i.MX 8M Mini SoC featuring:
- LPDDR4 DRAM
- eMMC FLASH
- microSD connector with UHS support
- LIS2DE12 3-axis accelerometer
- Gateworks System Controller
- IMX8M FEC
- software selectable RS232/RS485/RS422 serial transceiver
- PMIC
- 2x off-board bi-directional opto-isolated digital I/O
- 1x M.2 A-E Key Socket and 1x MiniPCIe socket with USB2.0 and PCIe
(resistor loading to route PCIe/USB2 between M.2 and MiniPCIe socket)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Layerscape SoCs contain a Security Fuse Processor which is basically a
efuse controller. Add the node, so userspace can read the efuses.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for i2c5, which is used to access the
external I2C bus on connector J22 of the imx8mp-evk.
Limit the speed to 100kHz since this is an external I2C bus.
Disabled by default, since it is shared with the CAN1 bus.
To enable i2c5, you need to disable the CAN1 function, enable the i2c5
function and also configure the CAN1/I2C5_SEL GPIO to HIGH to
select i2c5 instead of CAN1. This can be done by defining a gpio-hog
inside the pca6416 node, in your board device tree, like in this example:
&flexcan1 {
status = "disabled";
};
&i2c5 {
status = "okay";
};
&pca6416 {
can1-i2c5-sel-hog {
gpio-hog;
gpios = <2 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "can1-i2c5-sel";
};
};
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add gpio-line-names for the various GPIO's connected to the PCA6416
I/O expander on the imx8mp EVK.
This helps when using the new gpiod interface to find the GPIOs by name.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add more serial alias to imx8qm.dtsi file
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
add compatible string for usdhc3
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The wiki is a useful source of 3rd-party information about the SoC,
mostly hardware documentation.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220218160834.320200-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The supply-name for pwm-regualators is "pwm", so the property
needs to be pwm-supply, not vin-supply as in a number of boards.
In all cases changed here, the supplying regulator is always
an always-on fixed-regulator, so there will be no functional
change and only a change in the regulator hirarchy, as can be seen
for example in the regulator-summary.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20211227234529.1970281-2-heiko@sntech.de
|
|
vdd_log supplied a lot of the logic parts of the soc and is
supplied through pwm2.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20211227234529.1970281-1-heiko@sntech.de
|
|
Add support for the SanCloud BBE Extended WiFi board which shares common
hardware with other BBE varients. Compared to the vanilla BBE, this
particular model:
* adds a WiFi+Bluetooth module connected via SDIO and UART.
* drops the HDMI encoder, barometer and accelerometer.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The baseboard has an ISP1763 USB controller acting as a host.
Since the pinmuxing for the corresponding IRQ is different
between OMAP35 and DM37, the pinmux has been placed in the
kit-level files, while the common code is placed into the
baseboard file.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
RTC devices should be named "rtc" according to the standard RTC device
tree schema.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
infinity2m are running up to 1.2Ghz, this extends opp_table with the
corresponding frequencies and enable operating-points table for cpu1
Signed-off-by: Romain Perier <romain.perier@gmail.com>
|
|
The infinity3 has a slightly higher max frequency
compared to the infinity so extend the OPP table.
Co-authored-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Romain Perier <romain.perier@gmail.com>
|
|
Add an OPP table for the inifinity chips so
that cpu frequency scaling can happen.
Co-authored-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Romain Perier <romain.perier@gmail.com>
|
|
The second core also sources it's clock from the CPU PLL.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Romain Perier <romain.perier@gmail.com>
|
|
The CPU clock is sourced from the CPU PLL.
Link cpupll to the cpu so that frequency scaling can happen.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Romain Perier <romain.perier@gmail.com>
|
Geert Uytterhoeven
Biju Das
Jean-Jacques Hiblot
Krzysztof Kozlowski
Michael Riesch
Richard Zhu
Robin Murphy
Sergey Shtylyov
Nikita Yushchenko
Christian Hewitt
Jonas Kuenstler
Teresa Remmet
Tim Harvey
Michael Walle
Hugo Villeneuve
Oliver Graute
Jonathan Neuschäfer
Heiko Stuebner
Paul Barker
Adam Ford
Thierry Reding
Romain Perier
Daniel Palmer