| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In jadard_prepare() a reset pulse is generated with the following
statements (delays ommited for clarity):
gpiod_set_value(jadard->reset, 1); --> Deassert reset
gpiod_set_value(jadard->reset, 0); --> Assert reset for 10ms
gpiod_set_value(jadard->reset, 1); --> Deassert reset
However, specifying second argument of "0" to gpiod_set_value() means to
deassert the GPIO, and "1" means to assert it. If the reset signal is
defined as GPIO_ACTIVE_LOW in the DTS, the above statements will
incorrectly generate the reset pulse (inverted) and leave it asserted
(LOW) at the end of jadard_prepare().
Fix reset behavior by inverting gpiod_set_value() second argument
in jadard_prepare(). Also modify second argument to devm_gpiod_get()
in jadard_dsi_probe() to assert the reset when probing.
Do not modify it in jadard_unprepare() as it is already properly
asserted with "1", which seems to be the intended behavior.
Fixes: 6b818c533dd8 ("drm: panel: Add Jadard JD9365DA-H3 DSI panel")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240927135306.857617-1-hugo@hugovil.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927135306.857617-1-hugo@hugovil.com
|
|
Starting with DPCD version 2.0 bits 6:3 of the DP_DSC_BITS_PER_PIXEL_INC
DPCD register contains the NativeYCbCr422_MAX_bpp_DELTA field, which can
be non-zero as opposed to earlier DPCD versions, hence decoding the
bit_per_pixel increment value at bits 2:0 in the same register requires
applying a mask, do so.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Fixes: 0c2287c96521 ("drm/display/dp: Add helper function to get DSC bpp precision")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212161851.4007005-1-imre.deak@intel.com
|
|
Without the DP helper code, the newly added displayport support
causes a link failure:
x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.o: in function `hibmc_dp_aux_init':
dp_aux.c:(.text+0x37e): undefined reference to `drm_dp_aux_init'
x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_link.o: in function `hibmc_dp_link_set_pattern':
dp_link.c:(.text+0xae): undefined reference to `drm_dp_dpcd_write'
x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_link.o: in function `hibmc_dp_link_get_adjust_train':
dp_link.c:(.text+0x121): undefined reference to `drm_dp_get_adjust_request_voltage'
x86_64-linux-ld: dp_link.c:(.text+0x12e): undefined reference to `drm_dp_get_adjust_request_pre_emphasis'
x86_64-linux-ld: drivers/gpu/drm/hisilicon/hibmc/dp/dp_link.o: in function `hibmc_dp_link_training':
dp_link.c:(.text+0x2b0): undefined reference to `drm_dp_dpcd_write'
x86_64-linux-ld: dp_link.c:(.text+0x2e3): undefined reference to `drm_dp_dpcd_write'
Add both DRM_DISPLAY_DP_HELPER and DRM_DISPLAY_HELPER, which is
in turn required by the former.
Fixes: 0ab6ea261c1f ("drm/hisilicon/hibmc: add dp module in hibmc")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250127071059.617567-1-arnd@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
'priorities_info' is uninitialized, and the uninitialized value is copied
to user object when calling PANTHOR_UOBJ_SET(). Using memset to initialize
'priorities_info' to avoid this garbage value problem.
Fixes: f70000ef2352 ("drm/panthor: Add DEV_QUERY_GROUP_PRIORITIES_INFO dev query")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250119025828.1168419-1-suhui@nfschina.com
|
|
commit c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra")
caused a use of uninitialized mutex leading to below warning when
CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_LOCK_ALLOC are enabled.
[ 41.662843] ------------[ cut here ]------------
[ 41.663012] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 41.663035] WARNING: CPU: 4 PID: 794 at kernel/locking/mutex.c:587 __mutex_lock+0x670/0x878
[ 41.663458] Modules linked in: rtw88_8822c(+) bluetooth(+) rtw88_pci rtw88_core mac80211 aquantia libarc4 crc_itu_t cfg80211 tegra194_cpufreq dwmac_tegra(+) arm_dsu_pmu stmmac_platform stmmac pcs_xpcs rfkill at24 host1x(+) tegra_bpmp_thermal ramoops reed_solomon fuse loop nfnetlink xfs mmc_block rpmb_core ucsi_ccg ina3221 crct10dif_ce xhci_tegra ghash_ce lm90 sha2_ce sha256_arm64 sha1_ce sdhci_tegra pwm_fan sdhci_pltfm sdhci gpio_keys rtc_tegra cqhci mmc_core phy_tegra_xusb i2c_tegra tegra186_gpc_dma i2c_tegra_bpmp spi_tegra114 dm_mirror dm_region_hash dm_log dm_mod
[ 41.665078] CPU: 4 UID: 0 PID: 794 Comm: (udev-worker) Not tainted 6.11.0-29.31_1538613708.el10.aarch64+debug #1
[ 41.665838] Hardware name: NVIDIA NVIDIA Jetson AGX Orin Developer Kit/Jetson, BIOS 36.3.0-gcid-35594366 02/26/2024
[ 41.672555] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 41.679636] pc : __mutex_lock+0x670/0x878
[ 41.683834] lr : __mutex_lock+0x670/0x878
[ 41.688035] sp : ffff800084b77090
[ 41.691446] x29: ffff800084b77160 x28: ffffdd4bebf7b000 x27: ffffdd4be96b1000
[ 41.698799] x26: 1fffe0002308361c x25: 1ffff0001096ee18 x24: 0000000000000000
[ 41.706149] x23: 0000000000000000 x22: 0000000000000002 x21: ffffdd4be6e3c7a0
[ 41.713500] x20: ffff800084b770f0 x19: ffff00011841b1e8 x18: 0000000000000000
[ 41.720675] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720
[ 41.728023] x14: 0000000000000000 x13: 0000000000000001 x12: ffff6001a96eaab3
[ 41.735375] x11: 1fffe001a96eaab2 x10: ffff6001a96eaab2 x9 : ffffdd4be4838bbc
[ 41.742723] x8 : 00009ffe5691554e x7 : ffff000d4b755593 x6 : 0000000000000001
[ 41.749985] x5 : ffff000d4b755590 x4 : 1fffe0001d88f001 x3 : dfff800000000000
[ 41.756988] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000ec478000
[ 41.764251] Call trace:
[ 41.766695] __mutex_lock+0x670/0x878
[ 41.770373] mutex_lock_nested+0x2c/0x40
[ 41.774134] host1x_intr_start+0x54/0xf8 [host1x]
[ 41.778863] host1x_runtime_resume+0x150/0x228 [host1x]
[ 41.783935] pm_generic_runtime_resume+0x84/0xc8
[ 41.788485] __rpm_callback+0xa0/0x478
[ 41.792422] rpm_callback+0x15c/0x1a8
[ 41.795922] rpm_resume+0x698/0xc08
[ 41.799597] __pm_runtime_resume+0xa8/0x140
[ 41.803621] host1x_probe+0x810/0xbc0 [host1x]
[ 41.807909] platform_probe+0xcc/0x1a8
[ 41.811845] really_probe+0x188/0x800
[ 41.815347] __driver_probe_device+0x164/0x360
[ 41.819810] driver_probe_device+0x64/0x1a8
[ 41.823834] __driver_attach+0x180/0x490
[ 41.827773] bus_for_each_dev+0x104/0x1a0
[ 41.831797] driver_attach+0x44/0x68
[ 41.835296] bus_add_driver+0x23c/0x4e8
[ 41.839235] driver_register+0x15c/0x3a8
[ 41.843170] __platform_register_drivers+0xa4/0x208
[ 41.848159] tegra_host1x_init+0x4c/0xff8 [host1x]
[ 41.853147] do_one_initcall+0xd4/0x380
[ 41.856997] do_init_module+0x1dc/0x698
[ 41.860758] load_module+0xc70/0x1300
[ 41.864435] __do_sys_init_module+0x1a8/0x1d0
[ 41.868721] __arm64_sys_init_module+0x74/0xb0
[ 41.873183] invoke_syscall.constprop.0+0xdc/0x1e8
[ 41.877997] do_el0_svc+0x154/0x1d0
[ 41.881671] el0_svc+0x54/0x140
[ 41.884820] el0t_64_sync_handler+0x120/0x130
[ 41.889285] el0t_64_sync+0x1a4/0x1a8
[ 41.892960] irq event stamp: 69737
[ 41.896370] hardirqs last enabled at (69737): [<ffffdd4be6d7768c>] _raw_spin_unlock_irqrestore+0x44/0xe8
[ 41.905739] hardirqs last disabled at (69736): [<ffffdd4be59dcd40>] clk_enable_lock+0x98/0x198
[ 41.914314] softirqs last enabled at (68082): [<ffffdd4be466b1d0>] handle_softirqs+0x4c8/0x890
[ 41.922977] softirqs last disabled at (67945): [<ffffdd4be44f02a4>] __do_softirq+0x1c/0x28
[ 41.931289] ---[ end trace 0000000000000000 ]---
Inside the probe function when pm_runtime_enable() is called,
the PM core invokes a resume callback if the device Host1x is
in a suspended state. As it can be seen in the logs above,
this leads to host1x_intr_start() function call which is
trying to acquire a mutex lock. But, the function
host_intr_init() only gets called after the pm_runtime_enable()
where mutex is initialised leading to the use of mutex
prior to its initialisation.
Fix this by moving the mutex initialisation prior to the runtime
PM enablement function pm_runtime_enable() in probe.
Fixes: c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra")
Signed-off-by: Rupinderjit Singh <rusingh@redhat.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.ozlabs.org/project/linux-tegra/patch/20250206155803.201942-1-rusingh@redhat.com/
|
|
The find_preferred_mode() functions takes the mode_config mutex, but due
to the order most tests have, is called with the crtc_ww_class_mutex
taken. This raises a warning for a circular dependency when running the
tests with lockdep.
Reorder the tests to call find_preferred_mode before the acquire context
has been created to avoid the issue.
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129-test-kunit-v2-4-fe59c43805d5@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The tests all deviate slightly in how they assign their local pointers
to DRM entities. This makes refactoring pretty difficult, so let's just
move the assignment as soon as the entities are allocated.
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129-test-kunit-v2-3-fe59c43805d5@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Some tests have the drm pointer assigned multiple times to the same
value. Drop the redundant assignments.
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129-test-kunit-v2-2-fe59c43805d5@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The light_up_connector helper function in the HDMI infrastructure unit
tests uses drm_atomic_set_crtc_for_connector(), but fails when it
returns an error.
This function can return EDEADLK though if the sequence needs to be
restarted, and WW_MUTEX_SLOWPATH is meant to test that we handle it
properly.
Let's handle EDEADLK and restart the sequence in our tests as well.
Fixes: eb66d34d793e ("drm/tests: Add output bpc tests")
Reported-by: Dave Airlie <airlied@gmail.com>
Closes: https://lore.kernel.org/r/CAPM=9tzJ4-ERDxvuwrCyUPY0=+P44orhp1kLWVGL7MCfpQjMEQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20241031091558.2435850-1-mripard@kernel.org
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129-test-kunit-v2-1-fe59c43805d5@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Initramfs building tools such as dracut will look for a MODULE_FIRMWARE()
declaration to determine which firmware to include in the initramfs
when a driver is included in the initramfs.
As amdxdna doesn't declare any firmware this causes the driver to fail
to load with -ENOENT when in the initramfs. Add the missing declaration
for possible firmware.
Reported-by: Renjith Pananchikkal <Renjith.Pananchikkal@amd.com>
Suggested-by: Alexander Deucher <Alexander.Deucher@amd.com>
Fixes: 8c9ff1b181ba ("accel/amdxdna: Add a new driver for AMD AI Engine")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250204174031.3425762-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204174031.3425762-1-superm1@kernel.org
|
|
Disable runtime PM for the duration of reset/recovery so it is possible
to set the correct runtime PM state depending on the outcome of the
`ivpu_resume()`. Don’t suspend or reset the HW if the NPU is suspended
when the reset/recovery is requested. Also, move common reset/recovery
code to separate functions for better code readability.
Fixes: 27d19268cf39 ("accel/ivpu: Improve recovery and reset support")
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129124009.1039982-4-jacek.lawrynowicz@linux.intel.com
|
|
pm_runtime_resume_and_get() sets dev->power.runtime_error that causes
all subsequent pm_runtime_get_sync() calls to fail.
Clear the runtime_error using pm_runtime_set_suspended(), so the driver
doesn't have to be reloaded to recover when the NPU fails to boot during
runtime resume.
Fixes: 7d4b4c74432d ("accel/ivpu: Remove suspend_reschedule_counter")
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129124009.1039982-3-jacek.lawrynowicz@linux.intel.com
|
|
Ensure IRQs and IPC are properly disabled if HW sched or DCT
initialization fails.
Fixes: cc3c72c7e610 ("accel/ivpu: Refactor failure diagnostics during boot")
Cc: stable@vger.kernel.org # v6.13+
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129124009.1039982-2-jacek.lawrynowicz@linux.intel.com
|
|
If the hotplug detect of a display is low for longer than one second
(configurable through drm_dp_cec_unregister_delay), then the CEC adapter
is unregistered since we assume the display was disconnected. If the
HPD went low for less than one second, then we check if the properties
of the CEC adapter have changed, since that indicates that we actually
switch to new hardware and we have to unregister the old CEC device and
register a new one.
Unfortunately, the test for changed properties was written poorly, and
after a new CEC capability was added to the CEC core code the test always
returned true (i.e. the properties had changed).
As a result the CEC device was unregistered and re-registered for every
HPD toggle. If the CEC remote controller integration was also enabled
(CONFIG_MEDIA_CEC_RC was set), then the corresponding input device was
also unregistered and re-registered. As a result the input device in
/sys would keep incrementing its number, e.g.:
/sys/devices/pci0000:00/0000:00:08.1/0000:e7:00.0/rc/rc0/input20
Since short HPD toggles are common, the number could over time get into
the thousands.
While not a serious issue (i.e. nothing crashes), it is not intended
to work that way.
This patch changes the test so that it only checks for the single CEC
capability that can actually change, and it ignores any other
capabilities, so this is now safe as well if new caps are added in
the future.
With the changed test the bit under #ifndef CONFIG_MEDIA_CEC_RC can be
dropped as well, so that's a nice cleanup.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: Farblos <farblos@vodafonemail.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 2c6d1fffa1d9 ("drm: add support for DisplayPort CEC-Tunneling-over-AUX")
Tested-by: Farblos <farblos@vodafonemail.de>
Link: https://patchwork.freedesktop.org/patch/msgid/361bb03d-1691-4e23-84da-0861ead5dbdc@xs4all.nl
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add check for the return value of komeda_get_layer_fourcc_list()
to catch the potential exception.
Fixes: 5d51f6c0da1b ("drm/komeda: Add writeback support")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/r/20241219090256.146424-1-haoxiang_li2024@163.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
The ASTDP transmitter sometimes takes up to 1 second for enabling the
video signal, while the timeout is only 200 msec. This results in a
kernel error message. Increase the timeout to 1 second. An example
of the error message is shown below.
[ 697.084433] ------------[ cut here ]------------
[ 697.091115] ast 0000:02:00.0: [drm] drm_WARN_ON(!__ast_dp_wait_enable(ast, enabled))
[ 697.091233] WARNING: CPU: 1 PID: 160 at drivers/gpu/drm/ast/ast_dp.c:232 ast_dp_set_enable+0x123/0x140 [ast]
[...]
[ 697.272469] RIP: 0010:ast_dp_set_enable+0x123/0x140 [ast]
[...]
[ 697.415283] Call Trace:
[ 697.420727] <TASK>
[ 697.425908] ? show_trace_log_lvl+0x196/0x2c0
[ 697.433304] ? show_trace_log_lvl+0x196/0x2c0
[ 697.440693] ? drm_atomic_helper_commit_modeset_enables+0x30a/0x470
[ 697.450115] ? ast_dp_set_enable+0x123/0x140 [ast]
[ 697.458059] ? __warn.cold+0xaf/0xca
[ 697.464713] ? ast_dp_set_enable+0x123/0x140 [ast]
[ 697.472633] ? report_bug+0x134/0x1d0
[ 697.479544] ? handle_bug+0x58/0x90
[ 697.486127] ? exc_invalid_op+0x13/0x40
[ 697.492975] ? asm_exc_invalid_op+0x16/0x20
[ 697.500224] ? preempt_count_sub+0x14/0xc0
[ 697.507473] ? ast_dp_set_enable+0x123/0x140 [ast]
[ 697.515377] ? ast_dp_set_enable+0x123/0x140 [ast]
[ 697.523227] drm_atomic_helper_commit_modeset_enables+0x30a/0x470
[ 697.532388] drm_atomic_helper_commit_tail+0x58/0x90
[ 697.540400] ast_mode_config_helper_atomic_commit_tail+0x30/0x40 [ast]
[ 697.550009] commit_tail+0xfe/0x1d0
[ 697.556547] drm_atomic_helper_commit+0x198/0x1c0
This is a cosmetical problem. Enabling the video signal still works
even with the error message. The problem has always been present, but
only recent versions of the ast driver warn about missing the timeout.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 4e29cc7c5c67 ("drm/ast: astdp: Replace ast_dp_set_on_off()")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.13+
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250127134423.84266-1-tzimmermann@suse.de
|
|
The header drm_print.h uses members of struct drm_device pointers, as
such, it should include drm_device.h to let the compiler know the full
type definition.
Without such include, users of drm_print.h that don't explicitly need
drm_device.h would bump into build errors and be forced to include the
latter.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121210935.84357-1-gustavo.sousa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
We added some locking to this function, but accidentally forgot to unlock
if zynqmp_dp_mode_configure() failed. Use a guard lock to fix it.
Fixes: a7d5eeaa57d7 ("drm: zynqmp_dp: Add locking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b4042bd9-c943-4738-a2e1-8647259137c6@stanley.mountain
|
|
In commit e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL
after job completion"), we introduced a change to assign the job pointer
to NULL after completing a job, indicating job completion.
However, this approach created a race condition between the DRM
scheduler workqueue and the IRQ execution thread. As soon as the fence is
signaled in the IRQ execution thread, a new job starts to be executed.
This results in a race condition where the IRQ execution thread sets the
job pointer to NULL simultaneously as the `run_job()` function assigns
a new job to the pointer.
This race condition can lead to a NULL pointer dereference if the IRQ
execution thread sets the job pointer to NULL after `run_job()` assigns
it to the new job. When the new job completes and the GPU emits an
interrupt, `v3d_irq()` is triggered, potentially causing a crash.
[ 466.310099] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c0
[ 466.318928] Mem abort info:
[ 466.321723] ESR = 0x0000000096000005
[ 466.325479] EC = 0x25: DABT (current EL), IL = 32 bits
[ 466.330807] SET = 0, FnV = 0
[ 466.333864] EA = 0, S1PTW = 0
[ 466.337010] FSC = 0x05: level 1 translation fault
[ 466.341900] Data abort info:
[ 466.344783] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 466.350285] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 466.355350] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 466.360677] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000089772000
[ 466.367140] [00000000000000c0] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 466.375875] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[ 466.382163] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device algif_hash algif_skcipher af_alg bnep binfmt_misc vc4 snd_soc_hdmi_codec drm_display_helper cec brcmfmac_wcc spidev rpivid_hevc(C) drm_client_lib brcmfmac hci_uart drm_dma_helper pisp_be btbcm brcmutil snd_soc_core aes_ce_blk v4l2_mem2mem bluetooth aes_ce_cipher snd_compress videobuf2_dma_contig ghash_ce cfg80211 gf128mul snd_pcm_dmaengine videobuf2_memops ecdh_generic sha2_ce ecc videobuf2_v4l2 snd_pcm v3d sha256_arm64 rfkill videodev snd_timer sha1_ce libaes gpu_sched snd videobuf2_common sha1_generic drm_shmem_helper mc rp1_pio drm_kms_helper raspberrypi_hwmon spi_bcm2835 gpio_keys i2c_brcmstb rp1 raspberrypi_gpiomem rp1_mailbox rp1_adc nvmem_rmem uio_pdrv_genirq uio i2c_dev drm ledtrig_pattern drm_panel_orientation_quirks backlight fuse dm_mod ip_tables x_tables ipv6
[ 466.458429] CPU: 0 UID: 1000 PID: 2008 Comm: chromium Tainted: G C 6.13.0-v8+ #18
[ 466.467336] Tainted: [C]=CRAP
[ 466.470306] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
[ 466.476157] pstate: 404000c9 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 466.483143] pc : v3d_irq+0x118/0x2e0 [v3d]
[ 466.487258] lr : __handle_irq_event_percpu+0x60/0x228
[ 466.492327] sp : ffffffc080003ea0
[ 466.495646] x29: ffffffc080003ea0 x28: ffffff80c0c94200 x27: 0000000000000000
[ 466.502807] x26: ffffffd08dd81d7b x25: ffffff80c0c94200 x24: ffffff8003bdc200
[ 466.509969] x23: 0000000000000001 x22: 00000000000000a7 x21: 0000000000000000
[ 466.517130] x20: ffffff8041bb0000 x19: 0000000000000001 x18: 0000000000000000
[ 466.524291] x17: ffffffafadfb0000 x16: ffffffc080000000 x15: 0000000000000000
[ 466.531452] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 466.538613] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffd08c527eb0
[ 466.545777] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
[ 466.552941] x5 : ffffffd08c4100d0 x4 : ffffffafadfb0000 x3 : ffffffc080003f70
[ 466.560102] x2 : ffffffc0829e8058 x1 : 0000000000000001 x0 : 0000000000000000
[ 466.567263] Call trace:
[ 466.569711] v3d_irq+0x118/0x2e0 [v3d] (P)
[ 466.573826] __handle_irq_event_percpu+0x60/0x228
[ 466.578546] handle_irq_event+0x54/0xb8
[ 466.582391] handle_fasteoi_irq+0xac/0x240
[ 466.586498] generic_handle_domain_irq+0x34/0x58
[ 466.591128] gic_handle_irq+0x48/0xd8
[ 466.594798] call_on_irq_stack+0x24/0x58
[ 466.598730] do_interrupt_handler+0x88/0x98
[ 466.602923] el0_interrupt+0x44/0xc0
[ 466.606508] __el0_irq_handler_common+0x18/0x28
[ 466.611050] el0t_64_irq_handler+0x10/0x20
[ 466.615156] el0t_64_irq+0x198/0x1a0
[ 466.618740] Code: 52800035 3607faf3 f9442e80 52800021 (f9406018)
[ 466.624853] ---[ end trace 0000000000000000 ]---
[ 466.629483] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[ 466.636384] SMP: stopping secondary CPUs
[ 466.640320] Kernel Offset: 0x100c400000 from 0xffffffc080000000
[ 466.646259] PHYS_OFFSET: 0x0
[ 466.649141] CPU features: 0x100,00000170,00901250,0200720b
[ 466.654644] Memory Limit: none
[ 466.657706] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
Fix the crash by assigning the job pointer to NULL before signaling the
fence. This ensures that the job pointer is cleared before any new job
starts execution, preventing the race condition and the NULL pointer
dereference crash.
Cc: stable@vger.kernel.org
Fixes: e4b5ccd392b9 ("drm/v3d: Ensure job pointer is set to NULL after job completion")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Tested-by: Phil Elwell <phil@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250123012403.20447-1-mcanal@igalia.com
|
|
Removing the bochs PCI device should mark the DRM device as unplugged
without removing it. Hence clear the respective call to drm_dev_put()
from bochs_pci_remove().
Fixes a double unref in devm_drm_dev_init_release(). An example error
message is shown below:
[ 32.958338] BUG: KASAN: use-after-free in drm_dev_put.part.0+0x1b/0x90
[ 32.958850] Write of size 4 at addr ffff888152134004 by task (udev-worker)/591
[ 32.959574] CPU: 3 UID: 0 PID: 591 Comm: (udev-worker) Tainted: G E 6.13.0-rc2-1-default+ #3417
[ 32.960316] Tainted: [E]=UNSIGNED_MODULE
[ 32.960637] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
[ 32.961429] Call Trace:
[ 32.961433] <TASK>
[ 32.961439] dump_stack_lvl+0x68/0x90
[ 32.961452] print_address_description.constprop.0+0x88/0x330
[ 32.961461] ? preempt_count_sub+0x14/0xc0
[ 32.961473] print_report+0xe2/0x1d0
[ 32.961479] ? srso_alias_return_thunk+0x5/0xfbef5
[ 32.963725] ? __virt_addr_valid+0x143/0x320
[ 32.964077] ? srso_alias_return_thunk+0x5/0xfbef5
[ 32.964463] ? drm_dev_put.part.0+0x1b/0x90
[ 32.964817] kasan_report+0xce/0x1a0
[ 32.965123] ? drm_dev_put.part.0+0x1b/0x90
[ 32.965474] kasan_check_range+0xff/0x1c0
[ 32.965806] drm_dev_put.part.0+0x1b/0x90
[ 32.966138] release_nodes+0x84/0xc0
[ 32.966447] devres_release_all+0xd2/0x110
[ 32.966788] ? __pfx_devres_release_all+0x10/0x10
[ 32.967177] ? preempt_count_sub+0x14/0xc0
[ 32.967523] device_unbind_cleanup+0x16/0xc0
[ 32.967886] really_probe+0x1b7/0x570
[ 32.968207] __driver_probe_device+0xca/0x1b0
[ 32.968568] driver_probe_device+0x4a/0xf0
[ 32.968907] __driver_attach+0x10b/0x290
[ 32.969239] ? __pfx___driver_attach+0x10/0x10
[ 32.969598] bus_for_each_dev+0xc0/0x110
[ 32.969923] ? __pfx_bus_for_each_dev+0x10/0x10
[ 32.970291] ? bus_add_driver+0x17a/0x2b0
[ 32.970622] ? srso_alias_return_thunk+0x5/0xfbef5
[ 32.971011] bus_add_driver+0x19a/0x2b0
[ 32.971335] driver_register+0xd8/0x160
[ 32.971671] ? __pfx_bochs_pci_driver_init+0x10/0x10 [bochs]
[ 32.972130] do_one_initcall+0xba/0x390
[...]
After unplugging the DRM device, clients will close their references.
Closing the final reference will also release the DRM device.
Reported-by: Dr. David Alan Gilbert <dave@treblig.org>
Closes: https://lore.kernel.org/lkml/Z18dbfDAiFadsSdg@gallifrey/
Fixes: 04826f588682 ("drm/bochs: Allocate DRM device in struct bochs_device")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux.dev
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103095615.231162-1-tzimmermann@suse.de
|
|
In the combination of DRM_KMS_HELPER=m, DRM_GEM_SHMEM_HELPER=y, DRM_FBDEV_EMULATION=y,
The shmem code fails to link against the KMS helpers:
x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_driver_fbdev_probe':
(.text+0xeec601): undefined reference to `drm_fb_helper_alloc_info'
x86_64-linux-ld: (.text+0xeec633): undefined reference to `drm_fb_helper_fill_info'
x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_get_page':
drm_fbdev_shmem.c:(.text+0xeec7d2): undefined reference to `drm_gem_fb_get_obj'
x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_fb_mmap':
drm_fbdev_shmem.c:(.text+0xeec9f6): undefined reference to `drm_gem_fb_get_obj'
x86_64-linux-ld: vmlinux.o: in function `drm_fbdev_shmem_defio_imageblit':
(.rodata+0x5b2288): undefined reference to `drm_fb_helper_check_var'
x86_64-linux-ld: (.rodata+0x5b2290): undefined reference to `drm_fb_helper_set_par'
This can happen for a number of device drivers that select DRM_GEM_SHMEM_HELPER
without also selecting DRM_KMS_HELPER. To work around this, add another select
that forces DRM_KMS_HELPER to be built-in rather than a loadable module, but
only if FBDEV emulation is also enabled. DRM_TTM_HELPER and DRM_GEM_DMA_HELPER
look like they have the same problem in theory even if there is no possible
configuration that shows it. For consistency, do the same change to those.
Closes: https://lore.kernel.org/all/20250121-greedy-flounder-of-abundance-4d2ee8-mkl@pengutronix.de
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122090211.3161186-1-arnd@kernel.org
|
|
When testing on my tiled display, initially the tiled display is
detected correctly:
[90376.523692] xe 0000:67:00.0: [drm:drm_client_firmware_config.isra.0 [drm]] fallback: Not all outputs enabled
[90376.523713] xe 0000:67:00.0: [drm:drm_client_firmware_config.isra.0 [drm]] Enabled: 0, detected: 2
...
[90376.523967] xe 0000:67:00.0: [drm:drm_client_modeset_probe [drm]] [CRTC:82:pipe A] desired mode 1920x2160 set (1920,0)
[90376.524020] xe 0000:67:00.0: [drm:drm_client_modeset_probe [drm]] [CRTC:134:pipe B] desired mode 1920x2160 set (0,0)
But then, when modes have been set:
[90379.729525] xe 0000:67:00.0: [drm:drm_client_firmware_config.isra.0 [drm]] [CONNECTOR:287:DP-4] on [CRTC:82:pipe A]: 1920x2160
[90379.729640] xe 0000:67:00.0: [drm:drm_client_firmware_config.isra.0 [drm]] [CONNECTOR:289:DP-5] on [CRTC:134:pipe B]: 1920x2160
...
[90379.730036] xe 0000:67:00.0: [drm:drm_client_modeset_probe [drm]] [CRTC:82:pipe A] desired mode 1920x2160 set (0,0)
[90379.730124] xe 0000:67:00.0: [drm:drm_client_modeset_probe [drm]] [CRTC:134:pipe B] desired mode 1920x2160 set (0,0)
Call drm_client_get_tile_offsets() in drm_client_firmware_config() as
well, to ensure that the offset is set correctly.
This has to be done as a separate pass, as the tile order may not be
equal to the drm connector order.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116142825.3933-2-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Cc: <stable@vger.kernel.org>
|
|
Tiled displays have a different x/y offset to begin with. Instead of
attempting to remember this, just apply a delta instead.
This fixes the first tile being duplicated on other tiles when vt
switching.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116142825.3933-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Cc: <stable@vger.kernel.org>
|
|
|
|
Fix the following issues identified by Smatch static checker:
- The call to dma_buf_put(attach->dmabuf) after dma_buf_detach()
leads to a UAF bug as dma_buf_detach() frees the attach object.
Fix this by extracting the dmabuf object from attach and using
that in the call to dma_buf_put().
- The resv object is extracted from attach before checking to see
if attach is valid (that is !NULL) or not. Although, attach would
very likely be valid, fix this by making sure that the resv object
is used only after ensuring that attach is valid.
Fixes: 2885e575abc7 ("drm/virtio: Add helpers to initialize and free the imported object")
Fixes: ca77f27a2665 ("drm/virtio: Import prime buffers from other devices as guest blobs")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: Chia-I Wu <olvaffe@gmail.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212055421.775759-1-vivek.kasireddy@intel.com
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
[dmitry.osipenko@collabora.com: Edited commit title]
|
|
Tracing tools like perf and trace-cmd read the /sys/kernel/tracing/events/*/*/format
files to know how to parse the data and also how to print it. For the
"print fmt" portion of that file, if anything uses an enum that is not
exported to the tracing system, user space will not be able to parse it.
The GFP flags use to be defines, and defines get translated in the print
fmt sections. But now they are converted to use enums, which is not.
The mm_page_alloc trace event format use to have:
print fmt: "page=%p pfn=0x%lx order=%d migratetype=%d gfp_flags=%s",
REC->pfn != -1UL ? (((struct page *)vmemmap_base) + (REC->pfn)) : ((void
*)0), REC->pfn != -1UL ? REC->pfn : 0, REC->order, REC->migratetype,
(REC->gfp_flags) ? __print_flags(REC->gfp_flags, "|", {( unsigned
long)(((((((( gfp_t)(0x400u|0x800u)) | (( gfp_t)0x40u) | (( gfp_t)0x80u) |
(( gfp_t)0x100000u)) | (( gfp_t)0x02u)) | (( gfp_t)0x08u) | (( gfp_t)0)) |
(( gfp_t)0x40000u) | (( gfp_t)0x80000u) | (( gfp_t)0x2000u)) & ~((
gfp_t)(0x400u|0x800u))) | (( gfp_t)0x400u)), "GFP_TRANSHUGE"}, {( unsigned
long)((((((( gfp_t)(0x400u|0x800u)) | (( gfp_t)0x40u) | (( gfp_t)0x80u) |
(( gfp_t)0x100000u)) | (( gfp_t)0x02u)) | (( gfp_t)0x08u) | (( gfp_t)0)) ...
Where the GFP values are shown and not their names. But after the GFP
flags were converted to use enums, it has:
print fmt: "page=%p pfn=0x%lx order=%d migratetype=%d gfp_flags=%s",
REC->pfn != -1UL ? (vmemmap + (REC->pfn)) : ((void *)0), REC->pfn != -1UL
? REC->pfn : 0, REC->order, REC->migratetype, (REC->gfp_flags) ?
__print_flags(REC->gfp_flags, "|", {( unsigned long)((((((((
gfp_t)(((((1UL))) << (___GFP_DIRECT_RECLAIM_BIT))|((((1UL))) <<
(___GFP_KSWAPD_RECLAIM_BIT)))) | (( gfp_t)((((1UL))) << (___GFP_IO_BIT)))
| (( gfp_t)((((1UL))) << (___GFP_FS_BIT))) | (( gfp_t)((((1UL))) <<
(___GFP_HARDWALL_BIT)))) | (( gfp_t)((((1UL))) << (___GFP_HIGHMEM_BIT))))
| (( gfp_t)((((1UL))) << (___GFP_MOVABLE_BIT))) | (( gfp_t)0)) | ((
gfp_t)((((1UL))) << (___GFP_COMP_BIT))) ...
Where the enums names like ___GFP_KSWAPD_RECLAIM_BIT are shown and not their
values. User space has no way to convert these names to their values and
the output will fail to parse. What is shown is now:
mm_page_alloc: page=0xffffffff981685f3 pfn=0x1d1ac1 order=0 migratetype=1 gfp_flags=0x140cca
The TRACE_DEFINE_ENUM() macro was created to handle enums in the print fmt
files. This causes them to be replaced at boot up with the numbers, so
that user space tooling can parse it. By using this macro, the output is
back to the human readable:
mm_page_alloc: page=0xffffffff981685f3 pfn=0x122233 order=0 migratetype=1 gfp_flags=GFP_HIGHUSER_MOVABLE|__GFP_COMP
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250116214438.749504792@goodmis.org
Reported-by: Michael Petlan <mpetlan@redhat.com>
Closes: https://lore.kernel.org/all/87be5f7c-1a0-dad-daa0-54e342efaea7@redhat.com/
Fixes: 772dd0342727c ("mm: enumerate all gfp flags")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When adding the Device memory controller (DMEM), "select PAGE_COUNTER"
was added to CGROUP_RDMA, presumably instead of CGROUP_DMEM.
While commit e33b51499a0a6bca ("cgroup/dmem: Select PAGE_COUNTER") added
the missing select to CGROUP_DMEM, the bogus select is still there.
Remove it.
Fixes: b168ed458ddecc17 ("kernel/cgroup: Add "dmem" memory accounting cgroup")
Closes: https://lore.kernel.org/CAMuHMdUmPfahsnZwx2iB5yfh8rjjW25LNcnYujNBgcKotUXBNg@mail.gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b4d462f038a2f895f30ae759928397c8183f6f7e.1737020925.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
RING_CMD_CCTL read index should be UC on iGPU parts due to L3 caching
structure. Having this as WB blocks ULLS from being enabled. Change to
UC to unblock ULLS on iGPU.
v2:
- Drop internal communications commnet, bspec is updated
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Fixes: 328e089bfb37 ("drm/xe: Leverage ComputeCS read L3 caching")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250114002507.114087-1-matthew.brost@intel.com
(cherry picked from commit 758debf35b9cda5450e40996991a6e4b222899bd)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
In order to allow serialize() to be used from noinstr code, make it
__always_inline.
Fixes: 0ef8047b737d ("x86/static-call: provide a way to do very early static-call updates")
Closes: https://lore.kernel.org/oe-kbuild-all/202412181756.aJvzih2K-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241218100918.22167-1-jgross@suse.com
|
|
Currently imx8mp_blk_ctrl_remove() will continue the for loop
until an out-of-bounds exception occurs.
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : dev_pm_domain_detach+0x8/0x48
lr : imx8mp_blk_ctrl_shutdown+0x58/0x90
sp : ffffffc084f8bbf0
x29: ffffffc084f8bbf0 x28: ffffff80daf32ac0 x27: 0000000000000000
x26: ffffffc081658d78 x25: 0000000000000001 x24: ffffffc08201b028
x23: ffffff80d0db9490 x22: ffffffc082340a78 x21: 00000000000005b0
x20: ffffff80d19bc180 x19: 000000000000000a x18: ffffffffffffffff
x17: ffffffc080a39e08 x16: ffffffc080a39c98 x15: 4f435f464f006c72
x14: 0000000000000004 x13: ffffff80d0172110 x12: 0000000000000000
x11: ffffff80d0537740 x10: ffffff80d05376c0 x9 : ffffffc0808ed2d8
x8 : ffffffc084f8bab0 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffffff80d19b9420 x4 : fffffffe03466e60 x3 : 0000000080800077
x2 : 0000000000000000 x1 : 0000000000000001 x0 : 0000000000000000
Call trace:
dev_pm_domain_detach+0x8/0x48
platform_shutdown+0x2c/0x48
device_shutdown+0x158/0x268
kernel_restart_prepare+0x40/0x58
kernel_kexec+0x58/0xe8
__do_sys_reboot+0x198/0x258
__arm64_sys_reboot+0x2c/0x40
invoke_syscall+0x5c/0x138
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x38/0xc8
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x190/0x198
Code: 8128c2d0 ffffffc0 aa1e03e9 d503201f
Fixes: 556f5cf9568a ("soc: imx: add i.MX8MP HSIO blk-ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250115014118.4086729-1-xiaolei.wang@windriver.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Li Li reports that casting away callback type may cause issues
for CFI. Let's generate a small wrapper for each callback,
to make sure compiler sees the anticipated types.
Reported-by: Li Li <dualli@chromium.org>
Link: https://lore.kernel.org/CANBPYPjQVqmzZ4J=rVQX87a9iuwmaetULwbK_5_3YWk2eGzkaA@mail.gmail.com
Fixes: 170aafe35cb9 ("netdev: support binding dma-buf to netdevice")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250115161436.648646-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Consider a scenario where a CPU transitions from CPUHP_ONLINE to halfway
through a CPU hotunplug down to CPUHP_HRTIMERS_PREPARE, and then back to
CPUHP_ONLINE:
Since hrtimers_prepare_cpu() does not run, cpu_base.hres_active remains set
to 1 throughout. However, during a CPU unplug operation, the tick and the
clockevents are shut down at CPUHP_AP_TICK_DYING. On return to the online
state, for instance CFS incorrectly assumes that the hrtick is already
active, and the chance of the clockevent device to transition to oneshot
mode is also lost forever for the CPU, unless it goes back to a lower state
than CPUHP_HRTIMERS_PREPARE once.
This round-trip reveals another issue; cpu_base.online is not set to 1
after the transition, which appears as a WARN_ON_ONCE in enqueue_hrtimer().
Aside of that, the bulk of the per CPU state is not reset either, which
means there are dangling pointers in the worst case.
Address this by adding a corresponding startup() callback, which resets the
stale per CPU state and sets the online flag.
[ tglx: Make the new callback unconditionally available, remove the online
modification in the prepare() callback and clear the remaining
state in the starting callback instead of the prepare callback ]
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241220134421.3809834-1-koichiro.den@canonical.com
|
|
The group's ignore flag is:
_ read under the group's lock (idle entry, remote expiry)
_ turned on/off under the group's lock (idle entry, remote expiry)
_ turned on locklessly on idle exit
When idle entry or remote expiry clear the "ignore" flag of a group, the
operation must be synchronized against other concurrent idle entry or
remote expiry to make sure the related group timer is never missed. To
enforce this synchronization, both "ignore" clear and read are
performed under the group lock.
On the contrary, whether idle entry or remote expiry manage to observe
the "ignore" flag turned on by a CPU exiting idle is a matter of
optimization. If that flag set is missed or cleared concurrently, the
worst outcome is a migrator wasting time remotely handling a "ghost"
timer. This is why the ignore flag can be set locklessly.
Unfortunately, the related lockless accesses are bare and miss
appropriate annotations. KCSAN rightfully complains:
BUG: KCSAN: data-race in __tmigr_cpu_activate / print_report
write to 0xffff88842fc28004 of 1 bytes by task 0 on cpu 0:
__tmigr_cpu_activate
tmigr_cpu_activate
timer_clear_idle
tick_nohz_restart_sched_tick
tick_nohz_idle_exit
do_idle
cpu_startup_entry
kernel_init
do_initcalls
clear_bss
reserve_bios_regions
common_startup_64
read to 0xffff88842fc28004 of 1 bytes by task 0 on cpu 1:
print_report
kcsan_report_known_origin
kcsan_setup_watchpoint
tmigr_next_groupevt
tmigr_update_events
tmigr_inactive_up
__walk_groups+0x50/0x77
walk_groups
__tmigr_cpu_deactivate
tmigr_cpu_deactivate
__get_next_timer_interrupt
timer_base_try_to_set_idle
tick_nohz_stop_tick
tick_nohz_idle_stop_tick
cpuidle_idle_call
do_idle
Although the relevant accesses could be marked as data_race(), the
"ignore" flag being read several times within the same
tmigr_update_events() function is confusing and error prone. Prefer
reading it once in that function and make use of similar/paired accesses
elsewhere with appropriate comments when necessary.
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250114231507.21672-4-frederic@kernel.org
Closes: https://lore.kernel.org/oe-lkp/202501031612.62e0c498-lkp@intel.com
|
|
Commit 2522c84db513 ("timers/migration: Fix another race between hotplug
and idle entry/exit") fixed yet another race between idle exit and CPU
hotplug up leading to a wrong "0" value migrator assigned to the top
level. However there is yet another situation that remains unhandled:
[GRP0:0]
migrator = TMIGR_NONE
active = NONE
groupmask = 1
/ \ \
0 1 2..7
idle idle idle
0) The system is fully idle.
[GRP0:0]
migrator = CPU 0
active = CPU 0
groupmask = 1
/ \ \
0 1 2..7
active idle idle
1) CPU 0 is activating. It has done the cmpxchg on the top's ->migr_state
but it hasn't yet returned to __walk_groups().
[GRP0:0]
migrator = CPU 0
active = CPU 0, CPU 1
groupmask = 1
/ \ \
0 1 2..7
active active idle
2) CPU 1 is activating. CPU 0 stays the migrator (still stuck in
__walk_groups(), delayed by #VMEXIT for example).
[GRP1:0]
migrator = TMIGR_NONE
active = NONE
groupmask = 1
/ \
[GRP0:0] [GRP0:1]
migrator = CPU 0 migrator = TMIGR_NONE
active = CPU 0, CPU1 active = NONE
groupmask = 1 groupmask = 2
/ \ \
0 1 2..7 8
active active idle !online
3) CPU 8 is preparing to boot. CPUHP_TMIGR_PREPARE is being ran by CPU 1
which has created the GRP0:1 and the new top GRP1:0 connected to GRP0:1
and GRP0:0. CPU 1 hasn't yet propagated its activation up to GRP1:0.
[GRP1:0]
migrator = GRP0:0
active = GRP0:0
groupmask = 1
/ \
[GRP0:0] [GRP0:1]
migrator = CPU 0 migrator = TMIGR_NONE
active = CPU 0, CPU1 active = NONE
groupmask = 1 groupmask = 2
/ \ \
0 1 2..7 8
active active idle !online
4) CPU 0 finally resumed after its #VMEXIT. It's in __walk_groups()
returning from tmigr_cpu_active(). The new top GRP1:0 is visible and
fetched and the pre-initialized groupmask of GRP0:0 is also visible.
As a result tmigr_active_up() is called to GRP1:0 with GRP0:0 as active
and migrator. CPU 0 is returning to __walk_groups() but suffers again
a #VMEXIT.
[GRP1:0]
migrator = GRP0:0
active = GRP0:0
groupmask = 1
/ \
[GRP0:0] [GRP0:1]
migrator = CPU 0 migrator = TMIGR_NONE
active = CPU 0, CPU1 active = NONE
groupmask = 1 groupmask = 2
/ \ \
0 1 2..7 8
active active idle !online
5) CPU 1 propagates its activation of GRP0:0 to GRP1:0. This has no
effect since CPU 0 did it already.
[GRP1:0]
migrator = GRP0:0
active = GRP0:0, GRP0:1
groupmask = 1
/ \
[GRP0:0] [GRP0:1]
migrator = CPU 0 migrator = CPU 8
active = CPU 0, CPU1 active = CPU 8
groupmask = 1 groupmask = 2
/ \ \ \
0 1 2..7 8
active active idle active
6) CPU 1 links CPU 8 to its group. CPU 8 boots and goes through
CPUHP_AP_TMIGR_ONLINE which propagates activation.
[GRP2:0]
migrator = TMIGR_NONE
active = NONE
groupmask = 1
/ \
[GRP1:0] [GRP1:1]
migrator = GRP0:0 migrator = TMIGR_NONE
active = GRP0:0, GRP0:1 active = NONE
groupmask = 1 groupmask = 2
/ \
[GRP0:0] [GRP0:1] [GRP0:2]
migrator = CPU 0 migrator = CPU 8 migrator = TMIGR_NONE
active = CPU 0, CPU1 active = CPU 8 active = NONE
groupmask = 1 groupmask = 2 groupmask = 0
/ \ \ \
0 1 2..7 8 64
active active idle active !online
7) CPU 64 is booting. CPUHP_TMIGR_PREPARE is being ran by CPU 1
which has created the GRP1:1, GRP0:2 and the new top GRP2:0 connected to
GRP1:1 and GRP1:0. CPU 1 hasn't yet propagated its activation up to
GRP2:0.
[GRP2:0]
migrator = 0 (!!!)
active = NONE
groupmask = 1
/ \
[GRP1:0] [GRP1:1]
migrator = GRP0:0 migrator = TMIGR_NONE
active = GRP0:0, GRP0:1 active = NONE
groupmask = 1 groupmask = 2
/ \
[GRP0:0] [GRP0:1] [GRP0:2]
migrator = CPU 0 migrator = CPU 8 migrator = TMIGR_NONE
active = CPU 0, CPU1 active = CPU 8 active = NONE
groupmask = 1 groupmask = 2 groupmask = 0
/ \ \ \
0 1 2..7 8 64
active active idle active !online
8) CPU 0 finally resumed after its #VMEXIT. It's in __walk_groups()
returning from tmigr_cpu_active(). The new top GRP2:0 is visible and
fetched but the pre-initialized groupmask of GRP1:0 is not because no
ordering made its initialization visible. As a result tmigr_active_up()
may be called to GRP2:0 with a "0" child's groumask. Leaving the timers
ignored for ever when the system is fully idle.
The race is highly theoretical and perhaps impossible in practice but
the groupmask of the child is not the only concern here as the whole
initialization of the child is not guaranteed to be visible to any
tree walker racing against hotplug (idle entry/exit, remote handling,
etc...). Although the current code layout seem to be resilient to such
hazards, this doesn't tell much about the future.
Fix this with enforcing address dependency between group initialization
and the write/read to the group's parent's pointer. Fortunately that
doesn't involve any barrier addition in the fast paths.
Fixes: 10a0e6f3d3db ("timers/migration: Move hierarchy setup into cpuhotplug prepare callback")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250114231507.21672-3-frederic@kernel.org
|
|
Commit 10a0e6f3d3db ("timers/migration: Move hierarchy setup into
cpuhotplug prepare callback") fixed a race between idle exit and CPU
hotplug up leading to a wrong "0" value migrator assigned to the top
level. However there is still a situation that remains unhandled:
[GRP0:0]
migrator = TMIGR_NONE
active = NONE
groupmask = 0
/ \ \
0 1 2..7
idle idle idle
0) The system is fully idle.
[GRP0:0]
migrator = CPU 0
active = CPU 0
groupmask = 0
/ \ \
0 1 2..7
active idle idle
1) CPU 0 is activating. It has done the cmpxchg on the top's ->migr_state
but it hasn't yet returned to __walk_groups().
[GRP0:0]
migrator = CPU 0
active = CPU 0, CPU 1
groupmask = 0
/ \ \
0 1 2..7
active active idle
2) CPU 1 is activating. CPU 0 stays the migrator (still stuck in
__walk_groups(), delayed by #VMEXIT for example).
[GRP1:0]
migrator = TMIGR_NONE
active = NONE
groupmask = 0
/ \
[GRP0:0] [GRP0:1]
migrator = CPU 0 migrator = TMIGR_NONE
active = CPU 0, CPU1 active = NONE
groupmask = 2 groupmask = 1
/ \ \
0 1 2..7 8
active active idle !online
3) CPU 8 is preparing to boot. CPUHP_TMIGR_PREPARE is being ran by CPU 1
which has created the GRP0:1 and the new top GRP1:0 connected to GRP0:1
and GRP0:0. The groupmask of GRP0:0 is now 2. CPU 1 hasn't yet
propagated its activation up to GRP1:0.
[GRP1:0]
migrator = 0 (!!!)
active = NONE
groupmask = 0
/ \
[GRP0:0] [GRP0:1]
migrator = CPU 0 migrator = TMIGR_NONE
active = CPU 0, CPU1 active = NONE
groupmask = 2 groupmask = 1
/ \ \
0 1 2..7 8
active active idle !online
4) CPU 0 finally resumed after its #VMEXIT. It's in __walk_groups()
returning from tmigr_cpu_active(). The new top GRP1:0 is visible and
fetched but the freshly updated groupmask of GRP0:0 may not be visible
due to lack of ordering! As a result tmigr_active_up() is called to
GRP0:0 with a child's groupmask of "0". This buggy "0" groupmask then
becomes the migrator for GRP1:0 forever. As a result, timers on a fully
idle system get ignored.
One possible fix would be to define TMIGR_NONE as "0" so that such a
race would have no effect. And after all TMIGR_NONE doesn't need to be
anything else. However this would leave an uncomfortable state machine
where gears happen not to break by chance but are vulnerable to future
modifications.
Keep TMIGR_NONE as is instead and pre-initialize to "1" the groupmask of
any newly created top level. This groupmask is guaranteed to be visible
upon fetching the corresponding group for the 1st time:
_ By the upcoming CPU thanks to CPU hotplug synchronization between the
control CPU (BP) and the booting one (AP).
_ By the control CPU since the groupmask and parent pointers are
initialized locally.
_ By all CPUs belonging to the same group than the control CPU because
they must wait for it to ever become idle before needing to walk to
the new top. The cmpcxhg() on ->migr_state then makes sure its
groupmask is visible.
With this pre-initialization, it is guaranteed that if a future top level
is linked to an old one, it is walked through with a valid groupmask.
Fixes: 10a0e6f3d3db ("timers/migration: Move hierarchy setup into cpuhotplug prepare callback")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250114231507.21672-2-frederic@kernel.org
|
|
According to RFC4303, section "3.3.3. Sequence Number Generation",
the first packet sent using a given SA will contain a sequence
number of 1.
This is applicable to both ESN and non-ESN mode, which was not covered
in commit mentioned in Fixes line.
Fixes: 3d42c8cc67a8 ("net/mlx5e: Ensure that IPsec sequence packet number starts from 1")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
All packet offloads SAs have reqid in it to make sure they have
corresponding policy. While it is not strictly needed for transparent
mode, it is extremely important in tunnel mode. In that mode, policy and
SAs have different match criteria.
Policy catches the whole subnet addresses, and SA catches the tunnel gateways
addresses. The source address of such tunnel is not known during egress packet
traversal in flow steering as it is added only after successful encryption.
As reqid is required for packet offload and it is unique for every SA,
we can safely rely on it only.
The output below shows the configured egress policy and SA by strongswan:
[leonro@vm ~]$ sudo ip x s
src 192.169.101.2 dst 192.169.101.1
proto esp spi 0xc88b7652 reqid 1 mode tunnel
replay-window 0 flag af-unspec esn
aead rfc4106(gcm(aes)) 0xe406a01083986e14d116488549094710e9c57bc6 128
anti-replay esn context:
seq-hi 0x0, seq 0x0, oseq-hi 0x0, oseq 0x0
replay_window 1, bitmap-length 1
00000000
crypto offload parameters: dev eth2 dir out mode packet
[leonro@064 ~]$ sudo ip x p
src 192.170.0.0/16 dst 192.170.0.0/16
dir out priority 383615 ptype main
tmpl src 192.169.101.2 dst 192.169.101.1
proto esp spi 0xc88b7652 reqid 1 mode tunnel
crypto offload parameters: dev eth2 mode packet
Fixes: b3beba1fb404 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Attempt to enable IPsec packet offload in tunnel mode in debug kernel
generates the following kernel panic, which is happening due to two
issues:
1. In SA add section, the should be _bh() variant when marking SA mode.
2. There is not needed flush_workqueue in SA delete routine. It is not
needed as at this stage as it is removed from SADB and the running work
will be canceled later in SA free.
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
6.12.0+ #4 Not tainted
-----------------------------------------------------
charon/1337 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire:
ffff88810f365020 (&xa->xa_lock#24){+.+.}-{3:3}, at: mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
and this task is already holding:
ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30
which would create a new lock dependency:
(&x->lock){+.-.}-{3:3} -> (&xa->xa_lock#24){+.+.}-{3:3}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&x->lock){+.-.}-{3:3}
... which became SOFTIRQ-irq-safe at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_timer_handler+0x91/0xd70
__hrtimer_run_queues+0x1dd/0xa60
hrtimer_run_softirq+0x146/0x2e0
handle_softirqs+0x266/0x860
irq_exit_rcu+0x115/0x1a0
sysvec_apic_timer_interrupt+0x6e/0x90
asm_sysvec_apic_timer_interrupt+0x16/0x20
default_idle+0x13/0x20
default_idle_call+0x67/0xa0
do_idle+0x2da/0x320
cpu_startup_entry+0x50/0x60
start_secondary+0x213/0x2a0
common_startup_64+0x129/0x138
to a SOFTIRQ-irq-unsafe lock:
(&xa->xa_lock#24){+.+.}-{3:3}
... which became SOFTIRQ-irq-unsafe at:
...
lock_acquire+0x1be/0x520
_raw_spin_lock+0x2c/0x40
xa_set_mark+0x70/0x110
mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&xa->xa_lock#24);
local_irq_disable();
lock(&x->lock);
lock(&xa->xa_lock#24);
<Interrupt>
lock(&x->lock);
*** DEADLOCK ***
2 locks held by charon/1337:
#0: ffffffff87f8f858 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{4:4}, at: xfrm_netlink_rcv+0x5e/0x90
#1: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30
the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
-> (&x->lock){+.-.}-{3:3} ops: 29 {
HARDIRQ-ON-W at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_alloc_spi+0xc0/0xe60
xfrm_alloc_userspi+0x5f6/0xbc0
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
IN-SOFTIRQ-W at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_timer_handler+0x91/0xd70
__hrtimer_run_queues+0x1dd/0xa60
hrtimer_run_softirq+0x146/0x2e0
handle_softirqs+0x266/0x860
irq_exit_rcu+0x115/0x1a0
sysvec_apic_timer_interrupt+0x6e/0x90
asm_sysvec_apic_timer_interrupt+0x16/0x20
default_idle+0x13/0x20
default_idle_call+0x67/0xa0
do_idle+0x2da/0x320
cpu_startup_entry+0x50/0x60
start_secondary+0x213/0x2a0
common_startup_64+0x129/0x138
INITIAL USE at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_alloc_spi+0xc0/0xe60
xfrm_alloc_userspi+0x5f6/0xbc0
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
}
... key at: [<ffffffff87f9cd20>] __key.18+0x0/0x40
the dependencies between the lock to be acquired
and SOFTIRQ-irq-unsafe lock:
-> (&xa->xa_lock#24){+.+.}-{3:3} ops: 9 {
HARDIRQ-ON-W at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
SOFTIRQ-ON-W at:
lock_acquire+0x1be/0x520
_raw_spin_lock+0x2c/0x40
xa_set_mark+0x70/0x110
mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
INITIAL USE at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
}
... key at: [<ffffffffa078ff60>] __key.48+0x0/0xfffffffffff210a0 [mlx5_core]
... acquired at:
__lock_acquire+0x30a0/0x5040
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
xfrm_dev_state_delete+0x90/0x160
__xfrm_state_delete+0x662/0xae0
xfrm_state_delete+0x1e/0x30
xfrm_del_sa+0x1c2/0x340
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
stack backtrace:
CPU: 7 UID: 0 PID: 1337 Comm: charon Not tainted 6.12.0+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x74/0xd0
check_irq_usage+0x12e8/0x1d90
? print_shortest_lock_dependencies_backwards+0x1b0/0x1b0
? check_chain_key+0x1bb/0x4c0
? __lockdep_reset_lock+0x180/0x180
? check_path.constprop.0+0x24/0x50
? mark_lock+0x108/0x2fb0
? print_circular_bug+0x9b0/0x9b0
? mark_lock+0x108/0x2fb0
? print_usage_bug.part.0+0x670/0x670
? check_prev_add+0x1c4/0x2310
check_prev_add+0x1c4/0x2310
__lock_acquire+0x30a0/0x5040
? lockdep_set_lock_cmp_fn+0x190/0x190
? lockdep_set_lock_cmp_fn+0x190/0x190
lock_acquire+0x1be/0x520
? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
? lockdep_hardirqs_on_prepare+0x400/0x400
? __xfrm_state_delete+0x5f0/0xae0
? lock_downgrade+0x6b0/0x6b0
_raw_spin_lock_bh+0x34/0x40
? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
xfrm_dev_state_delete+0x90/0x160
__xfrm_state_delete+0x662/0xae0
xfrm_state_delete+0x1e/0x30
xfrm_del_sa+0x1c2/0x340
? xfrm_get_sa+0x250/0x250
? check_chain_key+0x1bb/0x4c0
xfrm_user_rcv_msg+0x493/0x880
? copy_sec_ctx+0x270/0x270
? check_chain_key+0x1bb/0x4c0
? lockdep_set_lock_cmp_fn+0x190/0x190
? lockdep_set_lock_cmp_fn+0x190/0x190
netlink_rcv_skb+0x12e/0x380
? copy_sec_ctx+0x270/0x270
? netlink_ack+0xd90/0xd90
? netlink_deliver_tap+0xcd/0xb60
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
? netlink_attachskb+0x730/0x730
? lock_acquire+0x1be/0x520
netlink_sendmsg+0x745/0xbe0
? netlink_unicast+0x740/0x740
? __might_fault+0xbb/0x170
? netlink_unicast+0x740/0x740
__sock_sendmsg+0xc5/0x190
? fdget+0x163/0x1d0
__sys_sendto+0x1fe/0x2c0
? __x64_sys_getpeername+0xb0/0xb0
? do_user_addr_fault+0x856/0xe30
? lock_acquire+0x1be/0x520
? __task_pid_nr_ns+0x117/0x410
? lock_downgrade+0x6b0/0x6b0
__x64_sys_sendto+0xdc/0x1b0
? lockdep_hardirqs_on_prepare+0x284/0x400
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f7d31291ba4
Code: 7d e8 89 4d d4 e8 4c 42 f7 ff 44 8b 4d d0 4c 8b 45 c8 89 c3 44 8b 55 d4 8b 7d e8 b8 2c 00 00 00 48 8b 55 d8 48 8b 75 e0 0f 05 <48> 3d 00 f0 ff ff 77 34 89 df 48 89 45 e8 e8 99 42 f7 ff 48 8b 45
RSP: 002b:00007f7d2ccd94f0 EFLAGS: 00000297 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f7d31291ba4
RDX: 0000000000000028 RSI: 00007f7d2ccd96a0 RDI: 000000000000000a
RBP: 00007f7d2ccd9530 R08: 00007f7d2ccd9598 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000297 R12: 0000000000000028
R13: 00007f7d2ccd9598 R14: 00007f7d2ccd96a0 R15: 00000000000000e1
</TASK>
Fixes: 4c24272b4e2b ("net/mlx5e: Listen to ARP events to update IPsec L2 headers in tunnel mode")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Clear the port select structure on error so no stale values left after
definers are destroyed. That's because the mlx5_lag_destroy_definers()
always try to destroy all lag definers in the tt_map, so in the flow
below lag definers get double-destroyed and cause kernel crash:
mlx5_lag_port_sel_create()
mlx5_lag_create_definers()
mlx5_lag_create_definer() <- Failed on tt 1
mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed
mlx5_lag_port_sel_create()
mlx5_lag_create_definers()
mlx5_lag_create_definer() <- Failed on tt 0
mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00
[0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)]
CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core]
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core]
lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core]
sp : ffff800085fafb00
x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000
x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000
x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000
x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350
x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0
x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c
x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190
x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000
Call trace:
mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core]
mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core]
mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core]
mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core]
mlx5_activate_lag+0x60c/0x6f8 [mlx5_core]
mlx5_do_bond_work+0x284/0x5c8 [mlx5_core]
process_one_work+0x170/0x3e0
worker_thread+0x2d8/0x3e0
kthread+0x11c/0x128
ret_from_fork+0x10/0x20
Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400)
---[ end trace 0000000000000000 ]---
Fixes: dc48516ec7d3 ("net/mlx5: Lag, add support to create definers for LAG")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If failed to add SF, error handling doesn't delete the SF from the
SF table. But the hw resources are deleted. So when unload driver,
hw resources will be deleted again. Firmware will report syndrome
0x68def3 which means "SF is not allocated can not deallocate".
Fix it by delete SF from SF table if failed to add SF.
Fixes: 2597ee190b4e ("net/mlx5: Call mlx5_sf_id_erase() once in mlx5_sf_dealloc()")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix a lockdep warning [1] observed during the write combining test.
The warning indicates a potential nested lock scenario that could lead
to a deadlock.
However, this is a false positive alarm because the SF lock and its
parent lock are distinct ones.
The lockdep confusion arises because the locks belong to the same object
class (i.e., struct mlx5_core_dev).
To resolve this, the code has been refactored to avoid taking both
locks. Instead, only the parent lock is acquired.
[1]
raw_ethernet_bw/2118 is trying to acquire lock:
[ 213.619032] ffff88811dd75e08 (&dev->wc_state_lock){+.+.}-{3:3}, at:
mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.620270]
[ 213.620270] but task is already holding lock:
[ 213.620943] ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at:
mlx5_wc_support_get+0x10c/0x210 [mlx5_core]
[ 213.622045]
[ 213.622045] other info that might help us debug this:
[ 213.622778] Possible unsafe locking scenario:
[ 213.622778]
[ 213.623465] CPU0
[ 213.623815] ----
[ 213.624148] lock(&dev->wc_state_lock);
[ 213.624615] lock(&dev->wc_state_lock);
[ 213.625071]
[ 213.625071] *** DEADLOCK ***
[ 213.625071]
[ 213.625805] May be due to missing lock nesting notation
[ 213.625805]
[ 213.626522] 4 locks held by raw_ethernet_bw/2118:
[ 213.627019] #0: ffff88813f80d578 (&uverbs_dev->disassociate_srcu){.+.+}-{0:0},
at: ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs]
[ 213.628088] #1: ffff88810fb23930 (&file->hw_destroy_rwsem){.+.+}-{3:3},
at: ib_init_ucontext+0x2d/0xf0 [ib_uverbs]
[ 213.629094] #2: ffff88810fb23878 (&file->ucontext_lock){+.+.}-{3:3},
at: ib_init_ucontext+0x49/0xf0 [ib_uverbs]
[ 213.630106] #3: ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3},
at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core]
[ 213.631185]
[ 213.631185] stack backtrace:
[ 213.631718] CPU: 1 UID: 0 PID: 2118 Comm: raw_ethernet_bw Not tainted
6.12.0-rc7_internal_net_next_mlx5_89a0ad0 #1
[ 213.632722] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 213.633785] Call Trace:
[ 213.634099]
[ 213.634393] dump_stack_lvl+0x7e/0xc0
[ 213.634806] print_deadlock_bug+0x278/0x3c0
[ 213.635265] __lock_acquire+0x15f4/0x2c40
[ 213.635712] lock_acquire+0xcd/0x2d0
[ 213.636120] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.636722] ? mlx5_ib_enable_lb+0x24/0xa0 [mlx5_ib]
[ 213.637277] __mutex_lock+0x81/0xda0
[ 213.637697] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.638305] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.638902] ? rcu_read_lock_sched_held+0x3f/0x70
[ 213.639400] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.640016] mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.640615] set_ucontext_resp+0x68/0x2b0 [mlx5_ib]
[ 213.641144] ? debug_mutex_init+0x33/0x40
[ 213.641586] mlx5_ib_alloc_ucontext+0x18e/0x7b0 [mlx5_ib]
[ 213.642145] ib_init_ucontext+0xa0/0xf0 [ib_uverbs]
[ 213.642679] ib_uverbs_handler_UVERBS_METHOD_GET_CONTEXT+0x95/0xc0
[ib_uverbs]
[ 213.643426] ? _copy_from_user+0x46/0x80
[ 213.643878] ib_uverbs_cmd_verbs+0xa6b/0xc80 [ib_uverbs]
[ 213.644426] ? ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x130/0x130
[ib_uverbs]
[ 213.645213] ? __lock_acquire+0xa99/0x2c40
[ 213.645675] ? lock_acquire+0xcd/0x2d0
[ 213.646101] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs]
[ 213.646625] ? reacquire_held_locks+0xcf/0x1f0
[ 213.647102] ? do_user_addr_fault+0x45d/0x770
[ 213.647586] ib_uverbs_ioctl+0xe0/0x170 [ib_uverbs]
[ 213.648102] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs]
[ 213.648632] __x64_sys_ioctl+0x4d3/0xaa0
[ 213.649060] ? do_user_addr_fault+0x4a8/0x770
[ 213.649528] do_syscall_64+0x6d/0x140
[ 213.649947] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 213.650478] RIP: 0033:0x7fa179b0737b
[ 213.650893] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c
89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8
10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d
7d 2a 0f 00 f7 d8 64 89 01 48
[ 213.652619] RSP: 002b:00007ffd2e6d46e8 EFLAGS: 00000246 ORIG_RAX:
0000000000000010
[ 213.653390] RAX: ffffffffffffffda RBX: 00007ffd2e6d47f8 RCX:
00007fa179b0737b
[ 213.654084] RDX: 00007ffd2e6d47e0 RSI: 00000000c0181b01 RDI:
0000000000000003
[ 213.654767] RBP: 00007ffd2e6d47c0 R08: 00007fa1799be010 R09:
0000000000000002
[ 213.655453] R10: 00007ffd2e6d4960 R11: 0000000000000246 R12:
00007ffd2e6d487c
[ 213.656170] R13: 0000000000000027 R14: 0000000000000001 R15:
00007ffd2e6d4f70
Fixes: d98995b4bf98 ("net/mlx5: Reimplement write combining test")
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
User added steering rules at RDMA_TX were being added to the first prio,
which is the counters prio.
Fix that so that they are correctly added to the BYPASS_PRIO instead.
Fixes: 24670b1a3166 ("net/mlx5: Add support for RDMA TX steering")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix two kernel doc warnings introduced by the recent DP audio patch:
- Add a doc line for the new "audio" field
- Remove a reference to zynqmp_dpsub.c from zynqmp.rst, as the .c file
no longer has structured comments
Fixes: 3ec5c1579305 ("drm: xlnx: zynqmp_dpsub: Add DP audio support")
Closes: https://lore.kernel.org/all/20241220154208.720d990b@canb.auug.org.au/
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220-xilinx-dp-audio-doc-fix-v1-1-cc488996e463@ideasonboard.com
(cherry picked from commit 96b5d2e807f667320c66f41ddc1c473023a73ab2)
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
syz reports an out of bounds read:
==================================================================
BUG: KASAN: slab-out-of-bounds in ocfs2_match fs/ocfs2/dir.c:334
[inline]
BUG: KASAN: slab-out-of-bounds in ocfs2_search_dirblock+0x283/0x6e0
fs/ocfs2/dir.c:367
Read of size 1 at addr ffff88804d8b9982 by task syz-executor.2/14802
CPU: 0 UID: 0 PID: 14802 Comm: syz-executor.2 Not tainted 6.13.0-rc4 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1
04/01/2014
Sched_ext: serialise (enabled+all), task: runnable_at=-10ms
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x229/0x350 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x164/0x530 mm/kasan/report.c:489
kasan_report+0x147/0x180 mm/kasan/report.c:602
ocfs2_match fs/ocfs2/dir.c:334 [inline]
ocfs2_search_dirblock+0x283/0x6e0 fs/ocfs2/dir.c:367
ocfs2_find_entry_id fs/ocfs2/dir.c:414 [inline]
ocfs2_find_entry+0x1143/0x2db0 fs/ocfs2/dir.c:1078
ocfs2_find_files_on_disk+0x18e/0x530 fs/ocfs2/dir.c:1981
ocfs2_lookup_ino_from_name+0xb6/0x110 fs/ocfs2/dir.c:2003
ocfs2_lookup+0x30a/0xd40 fs/ocfs2/namei.c:122
lookup_open fs/namei.c:3627 [inline]
open_last_lookups fs/namei.c:3748 [inline]
path_openat+0x145a/0x3870 fs/namei.c:3984
do_filp_open+0xe9/0x1c0 fs/namei.c:4014
do_sys_openat2+0x135/0x1d0 fs/open.c:1402
do_sys_open fs/open.c:1417 [inline]
__do_sys_openat fs/open.c:1433 [inline]
__se_sys_openat fs/open.c:1428 [inline]
__x64_sys_openat+0x15d/0x1c0 fs/open.c:1428
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf6/0x210 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f01076903ad
Code: c3 e8 a7 2b 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f01084acfc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
RAX: ffffffffffffffda RBX: 00007f01077cbf80 RCX: 00007f01076903ad
RDX: 0000000000105042 RSI: 0000000020000080 RDI: ffffffffffffff9c
RBP: 00007f01077cbf80 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000000001ff R11: 0000000000000246 R12: 0000000000000000
R13: 00007f01077cbf80 R14: 00007f010764fc90 R15: 00007f010848d000
</TASK>
==================================================================
And a general protection fault in ocfs2_prepare_dir_for_insert:
==================================================================
loop0: detected capacity change from 0 to 32768
JBD2: Ignoring recovery information on journal
ocfs2: Mounting device (7,0) on (node local, slot 0) with ordered data
mode.
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 UID: 0 PID: 5096 Comm: syz-executor792 Not tainted
6.11.0-rc4-syzkaller-00002-gb0da640826ba #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:ocfs2_find_dir_space_id fs/ocfs2/dir.c:3406 [inline]
RIP: 0010:ocfs2_prepare_dir_for_insert+0x3309/0x5c70 fs/ocfs2/dir.c:4280
Code: 00 00 e8 2a 25 13 fe e9 ba 06 00 00 e8 20 25 13 fe e9 4f 01 00 00
e8 16 25 13 fe 49 8d 7f 08 49 8d 5f 09 48 89 f8 48 c1 e8 03 <42> 0f b6
04 20 84 c0 0f 85 bd 23 00 00 48 89 d8 48 c1 e8 03 42 0f
RSP: 0018:ffffc9000af9f020 EFLAGS: 00010202
RAX: 0000000000000001 RBX: 0000000000000009 RCX: ffff88801e27a440
RDX: 0000000000000000 RSI: 0000000000000400 RDI: 0000000000000008
RBP: ffffc9000af9f830 R08: ffffffff8380395b R09: ffffffff838090a7
R10: 0000000000000002 R11: ffff88801e27a440 R12: dffffc0000000000
R13: ffff88803c660878 R14: f700000000000088 R15: 0000000000000000
FS: 000055555a677380(0000) GS:ffff888020800000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000560bce569178 CR3: 000000001de5a000 CR4: 0000000000350ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ocfs2_mknod+0xcaf/0x2b40 fs/ocfs2/namei.c:292
vfs_mknod+0x36d/0x3b0 fs/namei.c:4088
do_mknodat+0x3ec/0x5b0
__do_sys_mknodat fs/namei.c:4166 [inline]
__se_sys_mknodat fs/namei.c:4163 [inline]
__x64_sys_mknodat+0xa7/0xc0 fs/namei.c:4163
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f2dafda3a99
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 17 00 00 90 48 89
f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08
0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8
64 89 01 48
RSP: 002b:00007ffe336a6658 EFLAGS: 00000246 ORIG_RAX:
0000000000000103
RAX: ffffffffffffffda RBX: 0000000000000000 RCX:
00007f2dafda3a99
RDX: 00000000000021c0 RSI: 0000000020000040 RDI:
00000000ffffff9c
RBP: 00007f2dafe1b5f0 R08: 0000000000004480 R09:
000055555a6784c0
R10: 0000000000000103 R11: 0000000000000246 R12:
00007ffe336a6680
R13: 00007ffe336a68a8 R14: 431bde82d7b634db R15:
00007f2dafdec03b
</TASK>
==================================================================
The two reports are all caused invalid negative i_size of dir inode. For
ocfs2, dir_inode can't be negative or zero.
Here add a check in which is called by ocfs2_check_dir_for_entry(). It
fixes the second report as ocfs2_check_dir_for_entry() must be called
before ocfs2_prepare_dir_for_insert(). Also set a up limit for dir with
OCFS2_INLINE_DATA_FL. The i_size can't be great than blocksize.
Link: https://lkml.kernel.org/r/20250106140640.92260-1-glass.su@suse.com
Reported-by: Jiacheng Xu <stitch@zju.edu.cn>
Link: https://lore.kernel.org/ocfs2-devel/17a04f01.1ae74.19436d003fc.Coremail.stitch@zju.edu.cn/T/#u
Reported-by: syzbot+5a64828fcc4c2ad9b04f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/0000000000005894f3062018caf1@google.com/T/
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Map old gmail + name to my current full name and email.
Link: https://lkml.kernel.org/r/xbfkmvmp4wyxrvlan57bjnul5icrwfyt67vnhhw2cyr5rzbnee@mfvihhd6s7l5
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In zswap_cpu_comp_prepare(), allocations are made and assigned to various
members of acomp_ctx under acomp_ctx->mutex. However, allocations may
recurse into zswap through reclaim, trying to acquire the same mutex and
deadlocking.
Move the allocations before the mutex critical section. Only the
initialization of acomp_ctx needs to be done with the mutex held.
Link: https://lkml.kernel.org/r/20250113214458.2123410-1-yosryahmed@google.com
Fixes: 12dcb0ef5406 ("mm: zswap: properly synchronize freeing resources during CPU hotunplug")
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
syzkaller reported such a BUG_ON():
------------[ cut here ]------------
kernel BUG at mm/khugepaged.c:1835!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
...
CPU: 6 UID: 0 PID: 8009 Comm: syz.15.106 Kdump: loaded Tainted: G W 6.13.0-rc6 #22
Tainted: [W]=WARN
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : collapse_file+0xa44/0x1400
lr : collapse_file+0x88/0x1400
sp : ffff80008afe3a60
...
Call trace:
collapse_file+0xa44/0x1400 (P)
hpage_collapse_scan_file+0x278/0x400
madvise_collapse+0x1bc/0x678
madvise_vma_behavior+0x32c/0x448
madvise_walk_vmas.constprop.0+0xbc/0x140
do_madvise.part.0+0xdc/0x2c8
__arm64_sys_madvise+0x68/0x88
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0x128
el0t_64_sync_handler+0xc8/0xd0
el0t_64_sync+0x190/0x198
This indicates that the pgoff is unaligned. After analysis, I confirm the
vma is mapped to /dev/zero. Such a vma certainly has vm_file, but it is
set to anonymous by mmap_zero(). So even if it's mmapped by 2m-unaligned,
it can pass the check in thp_vma_allowable_order() as it is an
anonymous-mmap, but then be collapsed as a file-mmap.
It seems the problem has existed for a long time, but actually, since we
have khugepaged_max_ptes_none check before, we will skip collapse it as it
is /dev/zero and so has no present page. But commit d8ea7cc8547c limit
the check for only khugepaged, so the BUG_ON() can be triggered by
madvise_collapse().
Add vma_is_anonymous() check to make such vma be processed by
hpage_collapse_scan_pmd().
Link: https://lkml.kernel.org/r/20250111034511.2223353-1-liushixin2@huawei.com
Fixes: d8ea7cc8547c ("mm/khugepaged: add flag to predicate khugepaged-only behavior")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mattew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fixes an issue where the use of an unsigned data type in
`shmem_parse_opt_casefold()` caused incorrect evaluation of negative
conditions.
Link: https://lkml.kernel.org/r/20250111-unsignedcompare1601569-v3-1-c861b4221831@gmail.com
Fixes: 58e55efd6c72 ("tmpfs: Add casefold lookup support")
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Hugh Dickens <hughd@google.com>
Cc: Shuah khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When memory allocation profiling is disabled, there is no need to swap
allocation tags during migration. Skip it to avoid unnecessary overhead.
Once I added these checks, the overhead of the mode when memory profiling
is enabled but turned off went down by about 50%.
Link: https://lkml.kernel.org/r/20241226211639.1357704-2-surenb@google.com
Fixes: e0a955bf7f61 ("mm/codetag: add pgalloc_tag_copy()")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: David Wang <00107082@163.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In the kernel, the zone's lowmem_reserve and _watermark, and the global
variable 'totalreserve_pages' depend on the value of managed_pages, but
after running adjust_managed_page_count, these values aren't updated,
which causes some problems.
For example, in a system with six 1GB large pages, we found that the value
of protection in zoneinfo (zone->lowmem_reserve), is not right. Its value
seems to be calculated from the initial managed_pages, but after the
managed_pages changed, was not updated. Only after reading the file
/proc/sys/vm/lowmem_reserve_ratio, updates happen.
read file /proc/sys/vm/lowmem_reserve_ratio:
lowmem_reserve_ratio_sysctl_handler
----setup_per_zone_lowmem_reserve
--------calculate_totalreserve_pages
protection changed after reading file:
[root@test ~]# cat /proc/zoneinfo | grep protection
protection: (0, 2719, 57360, 0)
protection: (0, 0, 54640, 0)
protection: (0, 0, 0, 0)
protection: (0, 0, 0, 0)
[root@test ~]# cat /proc/sys/vm/lowmem_reserve_ratio
256 256 32 0
[root@test ~]# cat /proc/zoneinfo | grep protection
protection: (0, 2735, 63524, 0)
protection: (0, 0, 60788, 0)
protection: (0, 0, 0, 0)
protection: (0, 0, 0, 0)
lowmem_reserve increased also makes the totalreserve_pages increased,
which causes a decrease in available memory. The one above is just a test
machine, and the increase is not significant. On our online machine, the
reserved memory will increase by several GB due to reading this file. It
is clearly unreasonable to cause a sharp drop in available memory just by
reading a file.
In this patch, we update reserve memory when update managed_pages, The
size of reserved memory becomes stable. But it seems that the _watermark
should also be updated along with the managed_pages. We have not done it
because we are unsure if it is reasonable to set the watermark through the
initial managed_pages. If it is not reasonable, we will propose new
patch.
Link: https://lkml.kernel.org/r/20241225021034.45693-1-15645113830zzh@gmail.com
Signed-off-by: zihan zhou <15645113830zzh@gmail.com>
Signed-off-by: yaowenchao <yaowenchao@jd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
Hugo Villeneuve
Imre Deak
Arnd Bergmann
Su Hui
Rupinderjit Singh
Maxime Ripard
Mario Limonciello
Jacek Lawrynowicz
Hans Verkuil
Haoxiang Li
Thomas Zimmermann
Gustavo Sousa
Dan Carpenter
Maíra Canal
Maarten Lankhorst
Linus Torvalds
Vivek Kasireddy
Steven Rostedt
Geert Uytterhoeven
Matthew Brost
Juergen Gross
Xiaolei Wang
Jakub Kicinski
Koichiro Den
Frederic Weisbecker
Leon Romanovsky
Mark Zhang
Chris Mi
Yishai Hadas
Patrisious Haddad
Tomi Valkeinen
Su Yue
Ethan Carter Edwards
Yosry Ahmed
Liu Shixin
Karan Sanghavi
Suren Baghdasaryan
zihan zhou