| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add freeze, thaw, and restore callbacks for hibernate and restore
functionality.
Link: https://lore.kernel.org/r/20230202161045.3956-2-quic_ahari@quicinc.com
Signed-off-by: Anjana Hari <quic_ahari@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic at
once.
Link: https://lore.kernel.org/r/20230202141009.2290380-1-gregkh@linuxfoundation.org
Cc: Karan Tilak Kumar <kartilak@cisco.com>
Cc: Sesidhar Baddela <sebaddel@cisco.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The three DMA memory regions allocated for the host memory space are
documented to require alignment of 128, 1024, and 1024 respectively, but
the returned address is checked for PAGE_SIZE alignment.
In the case where these allocations are serviced by e.g. the Arm SMMU, the
size and alignment will be determined by its supported page sizes. In most
cases SZ_4K and a few larger sizes are available.
In the typical configuration this does not cause problems, but in the event
that the system PAGE_SIZE is increased beyond 4k, it's no longer reasonable
to expect that the allocation will be PAGE_SIZE aligned.
Limit the DMA alignment check to the actual alignment requirements written
in the comments in the code, to avoid the UFS core refusing to initialize
with such configuration.
Link: https://lore.kernel.org/r/20230201034917.1902330-1-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Correct spelling problems for Documentation/scsi/ as reported by codespell.
Link: https://lore.kernel.org/r/20230129231053.20863-8-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Correct spelling problems for Documentation/scsi/ ChangeLogs as reported by
codespell.
Link: https://lore.kernel.org/r/20230129231053.20863-7-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Correct spelling problems for Documentation/target/ as reported by
codespell.
Link: https://lore.kernel.org/r/20230127064005.1558-29-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The aac_priv() helper assumes that the private cmd area immediately follows
struct scsi_cmnd. Allocate this space as part of scsicmd, else there is a
risk of heap overflow. Seen with GCC 13:
../drivers/scsi/aacraid/aachba.c: In function 'aac_probe_container':
../drivers/scsi/aacraid/aachba.c:841:26: warning: array subscript 16 is outside array bounds of 'void[392]' [-Warray-bounds=]
841 | status = cmd_priv->status;
| ^~
In file included from ../include/linux/resource_ext.h:11,
from ../include/linux/pci.h:40,
from ../drivers/scsi/aacraid/aachba.c:22:
In function 'kmalloc',
inlined from 'kzalloc' at ../include/linux/slab.h:720:9,
inlined from 'aac_probe_container' at ../drivers/scsi/aacraid/aachba.c:821:30:
../include/linux/slab.h:580:24: note: at offset 392 into object of size 392 allocated by 'kmalloc_trace'
580 | return kmalloc_trace(
| ^~~~~~~~~~~~~~
581 | kmalloc_caches[kmalloc_type(flags)][index],
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
582 | flags, size);
| ~~~~~~~~~~~~
Fixes: 76a3451b64c6 ("scsi: aacraid: Move the SCSI pointer to private command data")
Link: https://lore.kernel.org/r/20230128000409.never.976-kees@kernel.org
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Document the compatible string for the UFS found on SM8550.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
On SM8550, depending on the Qunipro, we can run with G5 or G4. For now,
when the major version is 5 or above, we go with G5. Therefore, we need to
specifically tell UFS HC that.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The newly added MSI support is mostly hidden inside of an #ifdef,
except for one line that now causes a build failure when MSI
is disabled:
drivers/ufs/host/ufs-qcom.c: In function 'ufs_qcom_remove':
drivers/ufs/host/ufs-qcom.c:1698:9: error: implicit declaration of function 'platform_msi_domain_free_irqs' [-Werror=i]
1698 | platform_msi_domain_free_irqs(hba->dev);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Above that, the symbol that guards the other call was recently removed, so
that is all dead code at the moment.
Remove the incorrect #ifdef and instead of a Kconfig dependency to only
allow building the driver when CONFIG_GENERIC_MSI_IRQ is enabled. This
symbol is always present when PCI_MSI or ARM_GIC_V3_ITS are enabled, both
of which should be present on kernels that can run on Qualcomm SoCs.
The 'select RESET_CONTROLLER' in combination with this dependency
unfortunately causes a dependency loop and this is a user-visible symbol,
so it's better to change both to 'depends on'.
Link: https://lore.kernel.org/r/20230126211831.2274211-1-arnd@kernel.org
Fixes: 519b6274a777 ("scsi: ufs: qcom: Add MCQ ESI config vendor specific ops")
Fixes: 13e7accb81d6 ("genirq: Get rid of GENERIC_MSI_IRQ_DOMAIN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
All UFS host controllers support DMA clustering. Hence enable DMA
clustering.
Notes:
- The max_segment_size parameter implements the 256 KiB limit for the
PRDT. The dma_boundary parameter represents a boundary that must not be
crossed by DMA scatter/gather lists. I'm not aware of any restrictions
on DMA scatter/gather lists in the UFSHCI specification other than the
256 KiB limit for the PRDT and the 32-bit address restriction for
controllers that only support 32-bits DMA. The latter restriction is
already handled by ufshcd_set_dma_mask().
- Without patch "scsi: ufs: exynos: Fix the maximum segment size", this
patch breaks support for the Exynos controller.
The history of the dma_boundary parameter in the UFS driver is as
follows:
* The initial UFS driver did not set the dma_boundary parameter.
* Commit 4dd4130a722f ("scsi: make sure all drivers set the use_clustering
flag") set the .use_clustering flag.
* Commit 4af14d113bcf ("scsi: remove the use_clustering flag") removed the
use_clustering flag and set the dma_boundary parameter instead.
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Prepare for enabling DMA clustering and also for supporting PAGE_SIZE !=
4096 by declaring explicitly that the maximum segment size is 4096 bytes
for Exynos UFS host controllers. Add this code in
exynos_ufs_hce_enable_notify() such that it happens after scsi_host_alloc()
and before __scsi_init_queue() is called by the LUN scanning code.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The Exynos UFS controller only supports scatter/gather list elements that
are aligned on a 4 KiB boundary. Fix DMA alignment in case PAGE_SIZE !=
4096. Rename UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE into
UFSHCD_QUIRK_4KB_DMA_ALIGNMENT.
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Fixes: 2b2bfc8aa519 ("scsi: ufs: Introduce a quirk to allow only page-aligned sg entries")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A logical evaluation of type (!A || A && B) can be simplified as (!A || B).
Improvement by suggested by excluded_middle.cocci Coccinelel semantic
patch.
Link: https://lore.kernel.org/r/Y7+oJuah0MgEW0PQ@ubun2204.myguest.virtualbox.org
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use a variable to compute memory size to be allocated once instead of
repeatedly computing it at different locations in the function. Issue
identified using the array_size_dup Coccinelle semantic patch.
Link: https://lore.kernel.org/r/Y7spwF8HTt0c0l7y@ubun2204.myguest.virtualbox.org
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Don't use "/**" to begin non-kernel-doc comments. Prevent a kernel-doc
warning:
drivers/scsi/elx/libefc_sli/sli4.c:13: warning: cannot understand function prototype: 'struct sli4_asic_entry_t sli4_asic_table[] = '
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: James Smart <james.smart@broadcom.com>
Cc: Ram Vegesna <ram.vegesna@broadcom.com>
Cc: target-devel@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230117070151.29339-1-rdunlap@infradead.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
UFS controllers may be cache coherent and must be marked as such in the
devicetree to avoid data corruption.
This is specifically needed on recent Qualcomm platforms like SC8280XP.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230116164236.18958-1-johan+linaro@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Smatch reports:
drivers/scsi/qla2xxx/qla_mid.c:1189:6: warning: symbol 'qla_trim_buf' was not declared. Should it be static?
drivers/scsi/qla2xxx/qla_mid.c:1221:6: warning: symbol '__qla_adjust_buf' was not declared. Should it be static?
These functions are only used in qla_mid.c, so they should be static.
Fixes: 1f8f9c34127e ("scsi: qla2xxx: edif: Reduce memory usage during low I/O")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230114013724.3943580-1-trix@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The use of kmap() is deprecated in favor of kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
the mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap’s pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts). It
is faster than kmap() in kernels with HIGHMEM enabled. Furthermore, the
tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and still valid.
Therefore, replace kmap() with kmap_local_page() in ipr_copy_ucode_buffer()
and, instead of open-coding local mappings + memcpy() + local un-mappings,
use the better suited memcpy_to_page() helper.
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20230103182556.29080-1-fmdefrancesco@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
kmap_atomic() is deprecated in favor of kmap_local_page(). Therefore,
replace kmap_atomic() with kmap_local_page() in ips_is_passthru(). In the
meantime remove an unnecessary comment, align code, and remove spaces.
kmap_atomic() is implemented like a kmap_local_page() which also disables
page-faults and preemption (the latter only for !PREEMPT_RT kernels). The
code within the mapping/unmapping in ips_is_passthru() is already in atomic
context because of a call to local_irq_save() and kmap_local_page() can be
called in atomic context too (including interrupts).
Therefore, a mere replacement of the old API with the new one is all it is
required (i.e., there is no need to explicitly add any calls to
pagefault_disable() and/or preempt_disable()).
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20230103173131.21259-1-fmdefrancesco@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Linux logs the error below:
$ dmesg --level=err | grep mpt
[ 7.647675] mpt3sas_cm0: Trace buffer memory 2048 KB allocated
This state does not denote an error condition (and also no warning), so
demote the level from error to info.
Cc: it+linux-scsi@molgen.mpg.de
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20230103150438.45922-1-pmenzel@molgen.mpg.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Printing a size_t value that is the result of the sizeof() operator
requires using the %z format string modifier to avoid a warning on 32-bit
architectures:
drivers/scsi/qla2xxx/qla_mid.c: In function 'qla_create_buf_pool':
drivers/scsi/qla2xxx/qla_mid.c:1094:51: error: format '%ld' expects argument of type 'long int', but argument 5 has type 'unsigned int' [-Werror=format=]
1094 | "Failed to allocate buf_map(%ld).\n", sz * sizeof(unsigned long));
| ~~^ ~~~~~~~~~~~~~~~~~~~~~~~~~~
| | |
| long int unsigned int
| %d
Fixes: 82d8dfd2a238 ("scsi: qla2xxx: edif: Fix performance dip due to lock contention")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Himanshu Madhani <himansnhu.madhani@oracle.com <mailto:himansnhu.madhani@oracle.com>>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230117170029.2387516-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add maintainer entry for Exynos UFS driver.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230114080247.601312-1-alim.akhtar@samsung.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
PA_GRANULARITY is duplicated, delete one of the entries.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230114022010.27088-1-alim.akhtar@samsung.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct MPI2_RAID_SCSI_IO_REQUEST ends with a single SGL, but expects to
copy multiple. Add a flexible array member so the compiler can reason about
the size of the memcpy(). This will avoid the run-time false positive
warning:
memcpy: detected field-spanning write (size 128) of single field "&r1_cmd->io_request->SGL" at drivers/scsi/megaraid/megaraid_sas_fusion.c:3326 (size 16)
This change results in no binary output differences.
Reported-by: Holger Kiehl <Holger.Kiehl@dwd.de>
Link: https://lore.kernel.org/all/88de8faa-56c4-693d-2d3-67152ee72057@diagnostix.dwd.de/
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: megaraidlinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Link: https://lore.kernel.org/r/20230106053153.never.999-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Holger Kiehl <Holger.Kiehl@dwd.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_execute() and scsi_execute_req() are no longer used so remove them.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_execute() is going to be removed. Convert cxlflash to use
scsi_execute_cmd().
[mkp: roll in fix for issue reported by sfr]
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_execute_req() is going to be removed. Convert pscsi to
scsi_execute_cmd().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_execute_req() is going to be removed. Convert virtio_scsi to
scsi_execute_cmd().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_execute*() is going to be removed. Convert sr to scsi_execute_cmd().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_execute_req() is going to be removed. Convert ses to
scsi_execute_cmd().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_execute_req() is going to be removed. Conver zbc to
scsi_execute_cmd().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_execute*() is going to be removed. Convert sd_mod to use
scsi_execute_cmd().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_execute() is going to be removed. Convert to the SPI class to
scsi_execute_cmd().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_execute_req() is going to be removed. Convert SCSI midlayer to
scsi_execute_cmd().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_execute() is going to be removed. Convert the scsi_dh users to
scsi_execute_cmd().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_execute_req() is going to be removed. Convert ch to
scsi_execute_cmd().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_execute_req() is going to be removed. Convert drivetemp to
scsi_execute_cmd().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_execute_req() is going to be removed. Convert libata to
scsi_execute_cmd().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the SCSI execution functions to use a struct for passing in optional
args. This commit adds the new struct, temporarily converts scsi_execute()
and scsi_execute_req() ands a new helper, scsi_execute_cmd(), which takes
the scsi_exec_args struct.
There should be no change in behavior. We no longer allow users to pass in
any request->rq_flags value, but they were only passing in RQF_PM which we
do support by allowing users to pass in the BLK_MQ_REQ flags used by
blk_mq_alloc_request().
Subsequent commits will convert scsi_execute() and scsi_execute_req() users
to the new helpers then remove scsi_execute() and scsi_execute_req().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add MCQ ESI config vendor specific ops.
Co-developed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add and export two functions to enable ESI and config ESI base addresses.
The calls to these exported functions will be added by the next patch in
this series.
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
As Event Specific Interrupt message format is not defined in UFSHCI JEDEC
specs, and the ESI handling highly depends on how the format is designed,
hence add a vendor specific ops such that SoC vendors can configure their
own ESI handlers. If ESI vops is not provided or returning error, go with
the legacy (central) interrupt way.
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Enable MCQ in the Host Controller.
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Complete CQE requests in poll. Assumption is that several poll completion
may happen in different CPUs for the same completion queue. Hence a spin
lock protection is added.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for completing requests from Completion Queue. Some host
controllers support vendor specific registers that provide a bitmap of all
CQs which have at least one completed CQE. Add this support. The MCQ
specification doesn't provide the Task Tag or its equivalent in the
Completion Queue Entry. So use an indirect method to find the Task Tag
from the Completion Queue Entry.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Modify completion path APIs and add completion queue entry.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support to find the hardware queue on which the request would be
queued. Since the very first queue is to serve device commands, an offset
of 1 is added to the index of the hardware queue.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support to send commands using multiple submission queues in MCQ mode.
Modify the functions that use ufshcd_send_command().
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Enable shared tags for MCQ. For UFS, this should not have a huge
performance impact. It however simplifies the MCQ implementation and reuses
most of the existing code in the issue and completion path. Also add
multiple queue mapping to map_queue().
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
Anjana Hari
Greg Kroah-Hartman
Bjorn Andersson
Randy Dunlap
Kees Cook
Abel Vesa
Arnd Bergmann
Bart Van Assche
Deepak R Varma
Johan Hovold
Tom Rix
Fabio M. De Francesco
Paul Menzel
Alim Akhtar
Mike Christie
Can Guo
Asutosh Das