Age | Commit message (Collapse) | Author | Files | Lines |
|
Defer removal of current primary MAC until a replacement is successfully
added. Previous implementation would left filter list with no primary MAC.
This was found while reading the code.
The patch takes advantage of the fact that there can only be a single primary
MAC filter at any time ([1] by Piotr)
Piotr has also applied some review suggestions during our internal patch
submittal process.
[1] https://lore.kernel.org/netdev/20230614145302.902301-2-piotrx.gardocki@intel.com/
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Pass addr parameter to mptcp_pm_alloc_anno_list() instead of entry. We
can reduce the scope, e.g. in mptcp_pm_alloc_anno_list(), we only access
"entry->addr", we can then restrict to the pointer to "addr" then.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MPTCP code always set the msk state to TCP_CLOSE before
calling performing the fast-close. Move such state transition in
mptcp_do_fastclose() to avoid some code duplication.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the MPTCP MIB counters introduced in commit fc518953bc9c
("mptcp: add and use MIB counter infrastructure") and more later. The
MPTCP Join selftest heavily relies on these counters.
If a counter is not supported by the kernel, it is not displayed when
using 'nstat -z'. We can then detect that and skip the verification. A
new helper (get_counter()) has been added recently in the -net tree to
do the required checks and return an error if the counter is not
available.
This commit is similar to the one with the same title applied in the
-net tree but it modifies code only present in net-next for the moment,
see the Fixes commit below.
While at it, we can also remove the use of ${extra_msg} variable which
is never assigned in chk_rm_tx_nr() function and use 'echo' without '-n'
parameter.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 0639fa230a21 ("selftests: mptcp: add explicit check for new mibs")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a testcase explicitly triggering the newly introduce
MPTCP_FULL_INFO getsockopt.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/388
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some user-space applications want to monitor the subflows utilization.
Dumping the per subflow tcp_info is not enough, as the PM could close
and re-create the subflows under-the-hood, fooling the accounting.
Even checking the src/dst addresses used by each subflow could not
be enough, because new subflows could re-use the same address/port of
the just closed one.
This patch introduces a new socket option, allow dumping all the relevant
information all-at-once (everything, everywhere...), in a consistent
manner.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/388
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The user-space need to properly account the data received/sent by
individual subflows. When additional subflows are created and/or
closed during the MPTCP socket lifetime, the information currently
exposed via MPTCP_TCPINFO are not enough: subflows are identified only
by the sequential position inside the info dumps, and that will change
with the above mentioned events.
To solve the above problem, this patch introduces a new subflow
identifier that is unique inside the given MPTCP socket scope.
The initial subflow get the id 1 and the other subflows get incremental
values at join time.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/388
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update the existing sockopt test-case to do some basic checks
on the newly added counters.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/385
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently there are no data transfer counters accounting for all
the subflows used by a given MPTCP socket. The user-space can compute
such figures aggregating the subflow info, but that is inaccurate
if any subflow is closed before the MPTCP socket itself.
Add the new counters in the MPTCP socket itself and expose them
via the existing diag and sockopt. While touching mptcp_diag_fill_info(),
acquire the relevant locks before fetching the msk data, to ensure
better data consistency
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/385
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
That will avoid an unneeded conditional in both the fast-path
and in the fallback case and will simplify a bit the next
patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch fixes a warning in the ena documentation
file identified by the kernel automatic tools.
The patch also adds a missing newline between
sections.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306171804.U7E92zoE-lkp@intel.com/
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230620133544.32584-1-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If there is no net-memcg associated with the sock, don't bother
calculating its memory usage for charge.
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Link: https://lore.kernel.org/r/20230620092712.16217-1-wuyun.abel@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|