| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove properties already mentioned by common spi-controller.yaml and
switch to unevaluatedProperties:false to achieve same functional effect.
This makes the binding a bit smaller. Similarly there is no need to
allow additionalProperties for children, because spi-controller.yaml
already does it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230601095908.563865-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Just drop a redundant empty line from the dw_spi_debugfs_init() function
left in the framework of the commit 0178f1e5d984 ("spi-dw-core.c: Fix
error checking for debugfs_create_dir") after removing the last return
statement.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20230530221725.26319-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Having no DMA is not an error. The simplest reason is not having it
configured. SPI will still be usable, so raise a warning instead to
get still some attention.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230531072850.739021-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A warning added in commit b5762d95607e ("spi: spi-qcom-qspi: Add DMA
mode support") was missing a newline. Add it.
Reported-by: Stephen Boyd <swboyd@chromium.org>
Closes: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/4573857/comment/44331d65_79128099/
Fixes: b5762d95607e ("spi: spi-qcom-qspi: Add DMA mode support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230530111348.1.Ibd1f4827e18a26dc802cd6e5ac300d83dc1bc41c@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make the pattern matching node names a bit stricter to improve DTS
consistency. The pattern is restricted to:
1. Only one unit address or one -N suffix,
2. -N suffixes to decimal numbers.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230530144851.92059-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Added the three missing spi mode bits SPI_3WIRE_HIZ, SPI_RX_CPHA_FLIP,
and SPI_MOSI_IDLE_LOW.
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Link: https://lore.kernel.org/r/20230530141641.1155691-6-boerge.struempfel@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In order to increase usability, the command line options are sorted into
logical groups. In addition, the usage string was sorted alphabetically,
and the missing parameters '8','i' and 'o' were added. Furthermore, the
option descriptions were moved further to the right, in order to allow
for longer option names.
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Link: https://lore.kernel.org/r/20230530141641.1155691-5-boerge.struempfel@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Allow userspace to set SPI_MOSI_IDLE_LOW and the SPI_3WIRE_HIZ mode bit
using the SPI_IOC_WR_MODE32 ioctl.
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Link: https://lore.kernel.org/r/20230530141641.1155691-4-boerge.struempfel@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
By default, the spi-imx controller pulls the mosi line high, whenever it
is idle. This behaviour can be inverted per CS by setting the
corresponding DATA_CTL bit in the config register of the controller.
Also, since the controller mode-bits have to be touched anyways, the
SPI_CPOL and SPI_CPHA are replaced by the combined SPI_MODE_X_MASK flag.
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Link: https://lore.kernel.org/r/20230530141641.1155691-3-boerge.struempfel@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some spi controller switch the mosi line to high, whenever they are
idle. This may not be desired in all use cases. For example neopixel
leds can get confused and flicker due to misinterpreting the idle state.
Therefore, we introduce a new spi-mode bit, with which the idle behaviour
can be overwritten on a per device basis.
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Link: https://lore.kernel.org/r/20230530141641.1155691-2-boerge.struempfel@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch fixes the error checking in spi-dw-core.c in
debugfs_create_dir. The DebugFS kernel API is developed in
a way that the caller can safely ignore the errors that
occur during the creation of DebugFS nodes.
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Link: https://lore.kernel.org/r/20230520224025.14928-1-osmtendev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The `width_available` array is currently placed on the
`f_ospi_supports_op_width()` function's stack.
But the array is never modified. Make it `static const`. This makes the
code slightly smaller and more efficient.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230528195830.164669-3-lars@metafoo.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use `min_t` instead of `min` with casting the individual arguments.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230528195830.164669-2-lars@metafoo.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace the combination of devm_clk_get_enable() plus clk_prepare_enable()
with devm_clk_get_enabled(). Slightly reduces the amount of boilerplate
code.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230528195830.164669-1-lars@metafoo.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Because of the earlier
if (ret)
return ret;
ret is always zero at the end of mtk_spi_suspend(). Write it as explicit
return 0 for slightly improved clearness.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230530081648.2199419-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230530081648.2199419-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Returning an error code in a platform driver's remove function is wrong
most of the time and there is an effort to make the callback return
void. To prepare this rework the function not to exit early.
There wasn't a real problem because if pm runtime resume failed the only
step missing was pm_runtime_disable() which isn't an issue.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230530081648.2199419-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It is usually better to request all necessary resources (clocks,
regulators, ...) before starting to make use of them. That way they do
not change state in case one of the resources is not available yet and
probe deferral (-EPROBE_DEFER) is necessary. This is particularly
important for DMA channels and IOMMUs which are not enforced by
fw_devlink yet (unless you use fw_devlink.strict=1).
spi-qup does this in the wrong order, the clocks are enabled and
disabled again when the DMA channels are not available yet.
This causes issues in some cases: On most SoCs one of the SPI QUP
clocks is shared with the UART controller. When using earlycon UART is
actively used during boot but might not have probed yet, usually for
the same reason (waiting for the DMA controller). In this case, the
brief enable/disable cycle ends up gating the clock and further UART
console output will halt the system completely.
Avoid this by requesting the DMA channels before changing the clock
state.
Fixes: 612762e82ae6 ("spi: qup: Add DMA capabilities")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230518-spi-qup-clk-defer-v1-1-f49fc9ca4e02@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230525211047.735789-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
this patch advertise the availability of Dual and Quad SPI mode
for ipm design.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Tim.Kuo <Tim.kuo@mediatek.com>
Link: https://lore.kernel.org/r/20230523112608.10298-1-qii.wang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When unloading the spi-mt65xx kernel module during an ongoing spi-mem
operation the kernel will Oops shortly after unloading the module.
This is because wait_for_completion_timeout was still running and
returning into the no longer loaded module:
Internal error: Oops: 0000000096000005 [#1] SMP
Modules linked in: [many, but spi-mt65xx is no longer there]
CPU: 0 PID: 2578 Comm: block Tainted: G W O 6.3.0-next-20230428+ #0
Hardware name: Bananapi BPI-R3 (DT)
pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __lock_acquire+0x18c/0x20e8
lr : __lock_acquire+0x9b8/0x20e8
sp : ffffffc009ec3400
x29: ffffffc009ec3400 x28: 0000000000000001 x27: 0000000000000004
x26: ffffff80082888c8 x25: 0000000000000000 x24: 0000000000000000
x23: ffffffc009609da8 x22: ffffff8008288000 x21: ffffff8008288968
x20: 00000000000003c2 x19: ffffff8008be7990 x18: 00000000000002af
x17: 0000000000000000 x16: 0000000000000000 x15: ffffffc008d78970
x14: 000000000000080d x13: 00000000000002af x12: 00000000ffffffea
x11: 00000000ffffefff x10: ffffffc008dd0970 x9 : ffffffc008d78918
x8 : 0000000000017fe8 x7 : 0000000000000001 x6 : 0000000000000000
x5 : ffffff807fb53910 x4 : 0000000000000000 x3 : 0000000000000027
x2 : 0000000000000027 x1 : 0000000000000000 x0 : 00000000000c03c2
Call trace:
__lock_acquire+0x18c/0x20e8
lock_acquire+0x100/0x2a4
_raw_spin_lock_irq+0x58/0x74
__wait_for_common+0xe0/0x1b4
wait_for_completion_timeout+0x1c/0x24
0xffffffc000acc8a4 <--- used to be mtk_spi_transfer_wait
spi_mem_exec_op+0x390/0x3ec
spi_mem_no_dirmap_read+0x6c/0x88
spi_mem_dirmap_read+0xcc/0x12c
spinand_read_page+0xf8/0x1dc
spinand_mtd_read+0x1b4/0x2fc
mtd_read_oob_std+0x58/0x7c
mtd_read_oob+0x8c/0x148
mtd_read+0x50/0x6c
...
Prevent this by completing in mtk_spi_remove if needed.
Fixes: 9f763fd20da7 ("spi: mediatek: add spi memory support for ipm design")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/ZFAF6pJxMu1z6k4w@makrotopia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When all bits of IER are set to 0, we still can observe the lpspi irq events
when using DMA mode to transfer data.
So disable irq to avoid the too much irq events.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Link: https://lore.kernel.org/r/20230505063557.3962220-1-xiaoning.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ecspi IP block on imx51/imx53/imx6 have four native chip
selects. Tell that to the spi core so that any non-gpio chip selects
get validated against that upper bound.
Also set the SPI_MASTER_GPIO_SS so that the core verifies that, in the
case where both native and gpio chip selects are in use, there is at
least one leftover native chip select (or "channel", in the ecspi
language) for use by the slaves sitting on gpio chip selects.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20230425134527.483607-3-linux@rasmusvillemoes.dk
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Near the top of the function, spi_imx->controller is set to
controller (and is of course never modified again). The rest of the
function uses a mix of the two expressions.
For consistency, readability and better code generation, drop all the
spi_imx-> indirections.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20230425134527.483607-2-linux@rasmusvillemoes.dk
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the missing kernel documentation to silence the build warning.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230523090124.3132-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When working in slave mode it seems the timing is exceedingly tight.
The TX FIFO can never empty, because the master is driving the clock so
zeros would be sent for those bytes where the FIFO is empty.
Return to interleaving the writing of the TX FIFO and the reading
of the RX FIFO to try to ensure the data is available when required.
Fixes: a84c11e16dc2 ("spi: spi-cadence: Avoid read of RX FIFO before its ready")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230518093927.711358-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
Add MSR_IA32_TSX_CTRL into msrs_to_save[] to explicitly tell userspace to
save/restore the register value during migration. Missing this may cause
userspace that relies on KVM ioctl(KVM_GET_MSR_INDEX_LIST) fail to port the
value to the target VM.
In addition, there is no need to add MSR_IA32_TSX_CTRL when
ARCH_CAP_TSX_CTRL_MSR is not supported in kvm_get_arch_capabilities(). So
add the checking in kvm_probe_msr_to_save().
Fixes: c11f83e0626b ("KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality")
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20230509032348.1153070-1-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop KVM's manipulation of guest's CPUID.0x12.1 ECX and EDX, i.e. the
allowed XFRM of SGX enclaves, now that KVM explicitly checks the guest's
allowed XCR0 when emulating ECREATE.
Note, this could theoretically break a setup where userspace advertises
a "bad" XFRM and relies on KVM to provide a sane CPUID model, but QEMU
is the only known user of KVM SGX, and QEMU explicitly sets the SGX CPUID
XFRM subleaf based on the guest's XCR0.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230503160838.3412617-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explicitly check the vCPU's supported XCR0 when determining whether or not
the XFRM for ECREATE is valid. Checking CPUID works because KVM updates
guest CPUID.0x12.1 to restrict the leaf to a subset of the guest's allowed
XCR0, but that is rather subtle and KVM should not modify guest CPUID
except for modeling true runtime behavior (allowed XFRM is most definitely
not "runtime" behavior).
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230503160838.3412617-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Missed whitespace cleanups in stifb.
Fixes: 8000425739dc ("fbdev: stifb: Remove trailing whitespaces")
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Use the newly introduced usb_control_msg_send() instead of usb_control_msg()
when selecting the channel.
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The NFL4_UFLG_MASK define slipped in in commit 9208d4149758
("block: add a ->get_unique_id method") and should never have been
added, as NFSD as the only user of it already has it's copy.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230520090010.527046-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The syzbot fuzzer detected a problem in the udlfb driver, caused by an
endpoint not having the expected type:
usb 1-1: Read EDID byte 0 failed: -71
usb 1-1: Unable to get valid EDID from device/display
------------[ cut here ]------------
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 9 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880
drivers/usb/core/urb.c:504
Modules linked in:
CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted
6.4.0-rc1-syzkaller-00016-ga4422ff22142 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
04/28/2023
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
...
Call Trace:
<TASK>
dlfb_submit_urb+0x92/0x180 drivers/video/fbdev/udlfb.c:1980
dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315
dlfb_ops_set_par+0x2a7/0x8d0 drivers/video/fbdev/udlfb.c:1111
dlfb_usb_probe+0x149a/0x2710 drivers/video/fbdev/udlfb.c:1743
The current approach for this issue failed to catch the problem
because it only checks for the existence of a bulk-OUT endpoint; it
doesn't check whether this endpoint is the one that the driver will
actually use.
We can fix the problem by instead checking that the endpoint used by
the driver does exist and is bulk-OUT.
Reported-and-tested-by: syzbot+0e22d63dcebb802b9bc8@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Pavel Skripkin <paskripkin@gmail.com>
Fixes: aaf7dbe07385 ("video: fbdev: udlfb: properly check endpoint type")
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Just below the removed lines par->clk_wr_offset is hard coded to 3 so
there is no use in determining a different clock just to then ignore it
anyway. This also removes the only I/O port use remaining in the driver
allowing it to be built without CONFIG_HAS_IOPORT.
Link: https://lore.kernel.org/all/ZBx5aLo5h546BzBt@intel.com/
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Building with W=1 shows that a header needs to be included to
make the prototypes visible:
drivers/video/fbdev/i810/i810_dvt.c:194:6: error: no previous prototype for 'round_off_xres' [-Werror=missing-prototypes]
drivers/video/fbdev/i810/i810_dvt.c:233:6: error: no previous prototype for 'i810fb_encode_registers' [-Werror=missing-prototypes]
drivers/video/fbdev/i810/i810_dvt.c:245:6: error: no previous prototype for 'i810fb_fill_var_timings' [-Werror=missing-prototypes]
drivers/video/fbdev/i810/i810_dvt.c:279:5: error: no previous prototype for 'i810_get_watermark' [-Werror=missing-prototypes]
Adding the header leads to another warning from a mismatched
prototype, so fix this as well:
drivers/video/fbdev/i810/i810_dvt.c:280:5: error: conflicting types for 'i810_get_watermark'; have 'u32(struct fb_var_screeninfo *,
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
There is a global function with this name on sparc, but no
global declaration:
drivers/video/fbdev/core/fbmem.c:1469:15: error: no previous prototype for 'get_fb_unmapped_area'
Make the generic definition static to avoid this warning. On
sparc, this is never seen.
Edit by Helge:
Update Kconfig text as suggested by Geert Uytterhoeven.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
User should not be able to write block device if it is read-only at
block level (e.g force_ro attribute). This is ensured in the regular
fops write operation (blkdev_write_iter) but not when writing via
user mapping (mmap), allowing user to actually write a read-only
block device via a PROT_WRITE mapping.
Example: This can lead to integrity issue of eMMC boot partition
(e.g mmcblk0boot0) which is read-only by default.
To fix this issue, simply deny shared writable mapping if the block
is readonly.
Note: Block remains writable if switch to read-only is performed
after the initial mapping, but this is expected behavior according
to commit a32e236eb93e ("Partially revert "block: fail op_is_write()
requests to read-only partitions"")'.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230510074223.991297-1-loic.poulain@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Formatting a thin-provisioned (ESE) device that is part of a PPRC copy
relation might fail with the following error:
dasd-eckd 0.0.f500: An error occurred in the DASD device driver, reason=09
[...]
24 Byte: 0 MSG 4, no MSGb to SYSOP
During format of an ESE disk the Release Allocated Space command is used.
A bit in the payload of the command is set that is not allowed to be set
for devices in a copy relation. This bit is set to allow the partial
release of an extent.
Check for the existence of a copy relation before setting the respective
bit.
Fixes: 91dc4a197569 ("s390/dasd: Add new ioctl to release space")
Cc: stable@kernel.org # 5.3+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230519102340.3854819-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In kvm_vm_ioctl_create_vcpu(), add vcpu to vcpu_array iff it's safe to
access vcpu via kvm_get_vcpu() and kvm_for_each_vcpu(), i.e. when there's
no failure path requiring vcpu removal and destruction. Such order is
important because vcpu_array accessors may end up referencing vcpu at
vcpu_array[0] even before online_vcpus is set to 1.
When online_vcpus=0, any call to kvm_get_vcpu() goes through
array_index_nospec() and ends with an attempt to xa_load(vcpu_array, 0):
int num_vcpus = atomic_read(&kvm->online_vcpus);
i = array_index_nospec(i, num_vcpus);
return xa_load(&kvm->vcpu_array, i);
Similarly, when online_vcpus=0, a kvm_for_each_vcpu() does not iterate over
an "empty" range, but actually [0, ULONG_MAX]:
xa_for_each_range(&kvm->vcpu_array, idx, vcpup, 0, \
(atomic_read(&kvm->online_vcpus) - 1))
In both cases, such online_vcpus=0 edge case, even if leading to
unnecessary calls to XArray API, should not be an issue; requesting
unpopulated indexes/ranges is handled by xa_load() and xa_for_each_range().
However, this means that when the first vCPU is created and inserted in
vcpu_array *and* before online_vcpus is incremented, code calling
kvm_get_vcpu()/kvm_for_each_vcpu() already has access to that first vCPU.
This should not pose a problem assuming that once a vcpu is stored in
vcpu_array, it will remain there, but that's not the case:
kvm_vm_ioctl_create_vcpu() first inserts to vcpu_array, then requests a
file descriptor. If create_vcpu_fd() fails, newly inserted vcpu is removed
from the vcpu_array, then destroyed:
vcpu->vcpu_idx = atomic_read(&kvm->online_vcpus);
r = xa_insert(&kvm->vcpu_array, vcpu->vcpu_idx, vcpu, GFP_KERNEL_ACCOUNT);
kvm_get_kvm(kvm);
r = create_vcpu_fd(vcpu);
if (r < 0) {
xa_erase(&kvm->vcpu_array, vcpu->vcpu_idx);
kvm_put_kvm_no_destroy(kvm);
goto unlock_vcpu_destroy;
}
atomic_inc(&kvm->online_vcpus);
This results in a possible race condition when a reference to a vcpu is
acquired (via kvm_get_vcpu() or kvm_for_each_vcpu()) moments before said
vcpu is destroyed.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Message-Id: <20230510140410.1093987-2-mhal@rbox.co>
Cc: stable@vger.kernel.org
Fixes: c5b077549136 ("KVM: Convert the kvm->vcpus array to a xarray", 2021-12-08)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Include a definition of WARN_ON_ONCE() before using it.
Fixes: bb1fcc70d98f ("KVM: nVMX: Allow L1 to use 5-level page walks for nested EPT")
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jacob Xu <jacobhxu@google.com>
[reworded commit message; changed <asm/bug.h> to <linux/bug.h>]
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220225012959.1554168-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reject hardware enabling, i.e. VM creation, if a restart/shutdown has
been initiated to avoid re-enabling hardware between kvm_reboot() and
machine_{halt,power_off,restart}(). The restart case is especially
problematic (for x86) as enabling VMX (or clearing GIF in KVM_RUN on
SVM) blocks INIT, which results in the restart/reboot hanging as BIOS
is unable to wake and rendezvous with APs.
Note, this bug, and the original issue that motivated the addition of
kvm_reboot(), is effectively limited to a forced reboot, e.g. `reboot -f`.
In a "normal" reboot, userspace will gracefully teardown userspace before
triggering the kernel reboot (modulo bugs, errors, etc), i.e. any process
that might do ioctl(KVM_CREATE_VM) is long gone.
Fixes: 8e1c18157d87 ("KVM: VMX: Disable VMX when system shutdown")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20230512233127.804012-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use syscore_ops.shutdown to disable hardware virtualization during a
reboot instead of using the dedicated reboot_notifier so that KVM disables
virtualization _after_ system_state has been updated. This will allow
fixing a race in KVM's handling of a forced reboot where KVM can end up
enabling hardware virtualization between kernel_restart_prepare() and
machine_restart().
Rename KVM's hook to match the syscore op to avoid any possible confusion
from wiring up a "reboot" helper to a "shutdown" hook (neither "shutdown
nor "reboot" is completely accurate as the hook handles both).
Opportunistically rewrite kvm_shutdown()'s comment to make it less VMX
specific, and to explain why kvm_rebooting exists.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: kvmarm@lists.linux.dev
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: kvm-riscv@lists.infradead.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20230512233127.804012-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The __NR_execve definition for i386 was deleted by mistake
in the commit ece7f7c0507c ("perf bench syscall: Add fork
syscall benchmark"), add it to fix the build error on i386.
Fixes: ece7f7c0507cc147 ("perf bench syscall: Add fork syscall benchmark")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: loongson-kernel@lists.loongnix.cn
Closes: https://lore.kernel.org/all/CA+G9fYvgBR1iB0CorM8OC4AM_w_tFzyQKHc+rF6qPzJL=TbfDQ@mail.gmail.com/
Link: https://lore.kernel.org/r/1684480657-2375-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This was using the wrong variable, "r", instead of "ddata->vcc_reg", so
it returned success instead of a negative error code.
Fixes: 0d3dbeb8142a ("video: fbdev: omapfb: panel-tpo-td043mtea1: Make use of the helper function dev_err_probe()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Address the warning:
```
tests/attr.py:155: DeprecationWarning: The SafeConfigParser class has
been renamed to ConfigParser in Python 3.2. This alias will be
removed in Python 3.12. Use ConfigParser directly instead.
parser = configparser.SafeConfigParser()
```
by removing the word 'Safe'.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230517225707.2682235-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Previously hard coded events/metrics were used, update for the use of
the TopdownL1 json metric group.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes: 94b1a603fca78388 ("perf stat: Add TopdownL1 metric as a default if present")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230517225707.2682235-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When class_dev_iter is initialized, the reference count for the subsys
private structure is incremented, but never decremented, causing a
memory leak over time. To resolve this, save off a pointer to the
internal structure into the class_dev_iter structure and then when the
iterator is finished, drop the reference count.
Reported-and-tested-by: syzbot+e7afd76ad060fa0d2605@syzkaller.appspotmail.com
Fixes: 7b884b7f24b4 ("driver core: class.c: convert to only use class_to_subsys")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Cc: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/r/2023051610-stove-condense-9a77@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a quirk for Teamgroup MP33 that reports duplicate ids for disk.
Signed-off-by: Daniel Smith <dansmith@ds.gy>
[kch: patch formatting]
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Daniel Smith <dansmith@ds.gy>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When handling UBLK_IO_FETCH_REQ, ctx->uring_lock is grabbed first, then
ub->mutex is acquired.
When handling UBLK_CMD_STOP_DEV or UBLK_CMD_DEL_DEV, ub->mutex is
grabbed first, then calling io_uring_cmd_done() for canceling uring
command, in which ctx->uring_lock may be required.
Real deadlock only happens when all the above commands are issued from
same uring context, and in reality different uring contexts are often used
for handing control command and IO command.
Fix the issue by using io_uring_cmd_complete_in_task() to cancel command
in ublk_cancel_dev(ublk_cancel_queue).
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-block/becol2g7sawl4rsjq2dztsbc7mqypfqko6wzsyoyazqydoasml@rcxarzwidrhk
Cc: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20230517133408.210944-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
Krzysztof Kozlowski
Serge Semin
Alexander Stein
Douglas Anderson
Boerge Struempfel
Osama Muhammad
Lars-Peter Clausen
Uwe Kleine-König
Stephan Gerhold
Qii Wang
Daniel Golle
Clark Wang
Rasmus Villemoes
Charles Keepax
Linus Torvalds
Mingwei Zhang
Sean Christopherson
Helge Deller
Christoph Hellwig
Alan Stern
Niklas Schnelle
Arnd Bergmann
Loic Poulain
Stefan Haberland
Michal Luczaj
Jacob Xu
Tiezhu Yang
Dan Carpenter
Ian Rogers
Greg Kroah-Hartman
Daniel Smith
Ming Lei