| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This driver is susceptible to a form of the bug explained in commit
c26a2c2ddc01 ("gianfar: Fix TX timestamping with a stacked DSA driver")
and in Documentation/networking/timestamping.rst section "Other caveats
for MAC drivers", specifically it timestamps any skb which has
SKBTX_HW_TSTAMP, and does not consider if timestamping has been enabled
in adapter->hwtstamp_config.tx_type.
Evaluate the proper TX timestamping condition only once on the TX
path (in tsnep_xmit_frame_ring()) and store the result in an additional
TX entry flag. Evaluate the new TX entry flag in the TX confirmation path
(in tsnep_tx_poll()).
This way SKBTX_IN_PROGRESS is set by the driver as required, but never
evaluated. SKBTX_IN_PROGRESS shall not be evaluated as it can be set
by a stacked DSA driver and evaluating it would lead to unwanted
timestamps.
Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver")
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250514195657.25874-1-gerhard@engleder-embedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We cannot set frag_list to NULL pointer when alloc_page failed.
It will be used in tls_strp_check_queue_ok when the next time
tls_strp_read_sock is called.
This is because we don't reset full_len in tls_strp_flush_anchor_copy()
so the recv path will try to continue handling the partial record
on the next call but we dettached the rcvq from the frag list.
Alternative fix would be to reset full_len.
Unable to handle kernel NULL pointer dereference
at virtual address 0000000000000028
Call trace:
tls_strp_check_rcv+0x128/0x27c
tls_strp_data_ready+0x34/0x44
tls_data_ready+0x3c/0x1f0
tcp_data_ready+0x9c/0xe4
tcp_data_queue+0xf6c/0x12d0
tcp_rcv_established+0x52c/0x798
Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Signed-off-by: Pengtao He <hept.hept.hept@gmail.com>
Link: https://patch.msgid.link/20250514132013.17274-1-hept.hept.hept@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Error recovery, PCIe AER, resume, and TX timeout will invoke bnxt_open()
with netdev_lock only. This will cause RTNL assert failure in
netif_set_real_num_tx_queues(), netif_set_real_num_tx_queues(),
and netif_set_real_num_tx_queues().
Example error recovery assert:
RTNL: assertion failed at net/core/dev.c (3178)
WARNING: CPU: 3 PID: 3392 at net/core/dev.c:3178 netif_set_real_num_tx_queues+0x1fd/0x210
Call Trace:
<TASK>
? __pfx_bnxt_msix+0x10/0x10 [bnxt_en]
__bnxt_open_nic+0x1ef/0xb20 [bnxt_en]
bnxt_open+0xda/0x130 [bnxt_en]
bnxt_fw_reset_task+0x21f/0x780 [bnxt_en]
process_scheduled_works+0x9d/0x400
For now, bring back rtnl_lock() in all these code paths that can invoke
bnxt_open(). In the bnxt_queue_start() error path, we don't have
rtnl_lock held so we just change it to call netif_close() instead of
bnxt_reset_task() for simplicity. This error path is unlikely so it
should be fine.
Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250514062908.2766677-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver only offloads neighbors that are constructed on top of net
devices registered by it or their uppers (which are all Ethernet). The
device supports GRE encapsulation and decapsulation of forwarded
traffic, but the driver will not offload dummy neighbors constructed on
top of GRE net devices as they are not uppers of its net devices:
# ip link add name gre1 up type gre tos inherit local 192.0.2.1 remote 198.51.100.1
# ip neigh add 0.0.0.0 lladdr 0.0.0.0 nud noarp dev gre1
$ ip neigh show dev gre1 nud noarp
0.0.0.0 lladdr 0.0.0.0 NOARP
(Note that the neighbor is not marked with 'offload')
When the driver is reloaded and the existing configuration is replayed,
the driver does not perform the same check regarding existing neighbors
and offloads the previously added one:
# devlink dev reload pci/0000:01:00.0
$ ip neigh show dev gre1 nud noarp
0.0.0.0 lladdr 0.0.0.0 offload NOARP
If the neighbor is later deleted, the driver will ignore the
notification (given the GRE net device is not its upper) and will
therefore keep referencing freed memory, resulting in a use-after-free
[1] when the net device is deleted:
# ip neigh del 0.0.0.0 lladdr 0.0.0.0 dev gre1
# ip link del dev gre1
Fix by skipping neighbor replay if the net device for which the replay
is performed is not our upper.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x1ea/0x200
Read of size 8 at addr ffff888155b0e420 by task ip/2282
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
mlxsw_sp_neigh_entry_update+0x1ea/0x200
mlxsw_sp_router_rif_gone_sync+0x2a8/0x440
mlxsw_sp_rif_destroy+0x1e9/0x750
mlxsw_sp_netdevice_ipip_ol_event+0x3c9/0xdc0
mlxsw_sp_router_netdevice_event+0x3ac/0x15e0
notifier_call_chain+0xca/0x150
call_netdevice_notifiers_info+0x7f/0x100
unregister_netdevice_many_notify+0xc8c/0x1d90
rtnl_dellink+0x34e/0xa50
rtnetlink_rcv_msg+0x6fb/0xb70
netlink_rcv_skb+0x131/0x360
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x121/0x1b0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 8fdb09a7674c ("mlxsw: spectrum_router: Replay neighbours when RIF is made")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/c53c02c904fde32dad484657be3b1477884e9ad6.1747225701.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure that n_channels is set after allocating the
struct cfg80211_registered_device::int_scan_req member. Seen with
syzkaller:
UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:1208:5
index 0 is out of range for type 'struct ieee80211_channel *[] __counted_by(n_channels)' (aka 'struct ieee80211_channel *[]')
This was missed in the initial conversions because I failed to locate
the allocation likely due to the "sizeof(void *)" not matching the
"channels" array type.
Reported-by: syzbot+4bcdddd48bb6f0be0da1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/680fd171.050a0220.2b69d1.045e.GAE@google.com/
Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20250509184641.work.542-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Microdia JP001 does not support reading the sample rate which leads to
many lines of "cannot get freq at ep 0x84".
This patch adds the USB ID to quirks.c and avoids those error messages.
usb 7-4: New USB device found, idVendor=0c45, idProduct=636b, bcdDevice= 1.00
usb 7-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 7-4: Product: JP001
usb 7-4: Manufacturer: JP001
usb 7-4: SerialNumber: JP001
usb 7-4: 3:1: cannot get freq at ep 0x84
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Link: https://patch.msgid.link/20250515102132.73062-1-kwizart@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If ntuple filters count is modified followed by
unicast filters count using devlink then the ntuple count
set by user is ignored and all the ntuple filters are
being reallocated. Fix this by storing the ntuple count
set by user. Without this patch, say if user tries
to modify ntuple count as 8 followed by ucast filter count as 4
using devlink commands then ntuple count is being reverted to
default value 16 i.e, not retaining user set value 8.
Fixes: 39c469188b6d ("octeontx2-pf: Add ucast filter count configurability via devlink.")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747054357-5850-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Ensure that the hdr_trans_tlv command is included in the broadcast wtbl to
prevent the IPv6 and multicast packet from being dropped by the chip.
Cc: stable@vger.kernel.org
Fixes: cb1353ef3473 ("wifi: mt76: mt7925: integrate *mlo_sta_cmd and *sta_cmd")
Reported-by: Benjamin Xiao <fossben@pm.me>
Tested-by: Niklas Schnelle <niks@kernel.org>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://lore.kernel.org/lkml/EmWnO5b-acRH1TXbGnkx41eJw654vmCR-8_xMBaPMwexCnfkvKCdlU5u19CGbaapJ3KRu-l3B-tSUhf8CCQwL0odjo6Cd5YG5lvNeB-vfdg=@pm.me/
Link: https://patch.msgid.link/20250509010421.403022-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
A warning on driver removal started occurring after commit 9dd05df8403b
("net: warn if NAPI instance wasn't shut down"). Disable tx napi before
deleting it in mt76_dma_cleanup().
WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100
CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy)
Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024
RIP: 0010:__netif_napi_del_locked+0xf0/0x100
Call Trace:
<TASK>
mt76_dma_cleanup+0x54/0x2f0 [mt76]
mt7921_pci_remove+0xd5/0x190 [mt7921e]
pci_device_remove+0x47/0xc0
device_release_driver_internal+0x19e/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x6d/0xf0
pci_unregister_driver+0x2e/0xb0
__do_sys_delete_module.isra.0+0x197/0x2e0
do_syscall_64+0x7b/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Tested with mt7921e but the same pattern can be actually applied to other
mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled
in their *_dma_init() functions and only toggled off and on again inside
their suspend/resume/reset paths. So it should be okay to disable tx
napi in such a generic way.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 2ac515a5d74f ("mt76: mt76x02: use napi polling for tx cleanup")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Tested-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250506115540.19045-1-pchelkin@ispras.ru
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
With the netvsc driver changed to use vmbus_sendpacket_mpb_desc()
instead of vmbus_sendpacket_pagebuffer(), the latter has no remaining
callers. Remove it.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-6-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
init_page_array() now always creates a single page buffer array entry
for the rndis message, even if the rndis message crosses a page
boundary. As such, the number of page buffer array entries used for
the rndis message must no longer be tracked -- it is always just 1.
Remove the rmsg_pgcnt field and use "1" where the value is needed.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-5-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Starting with commit dca5161f9bd0 ("hv_netvsc: Check status in
SEND_RNDIS_PKT completion message") in the 6.3 kernel, the Linux
driver for Hyper-V synthetic networking (netvsc) occasionally reports
"nvsp_rndis_pkt_complete error status: 2".[1] This error indicates
that Hyper-V has rejected a network packet transmit request from the
guest, and the outgoing network packet is dropped. Higher level
network protocols presumably recover and resend the packet so there is
no functional error, but performance is slightly impacted. Commit
dca5161f9bd0 is not the cause of the error -- it only added reporting
of an error that was already happening without any notice. The error
has presumably been present since the netvsc driver was originally
introduced into Linux.
The root cause of the problem is that the netvsc driver in Linux may
send an incorrectly formatted VMBus message to Hyper-V when
transmitting the network packet. The incorrect formatting occurs when
the rndis header of the VMBus message crosses a page boundary due to
how the Linux skb head memory is aligned. In such a case, two PFNs are
required to describe the location of the rndis header, even though
they are contiguous in guest physical address (GPA) space. Hyper-V
requires that two rndis header PFNs be in a single "GPA range" data
struture, but current netvsc code puts each PFN in its own GPA range,
which Hyper-V rejects as an error.
The incorrect formatting occurs only for larger packets that netvsc
must transmit via a VMBus "GPA Direct" message. There's no problem
when netvsc transmits a smaller packet by copying it into a pre-
allocated send buffer slot because the pre-allocated slots don't have
page crossing issues.
After commit 14ad6ed30a10 ("net: allow small head cache usage with
large MAX_SKB_FRAGS values") in the 6.14-rc4 kernel, the error occurs
much more frequently in VMs with 16 or more vCPUs. It may occur every
few seconds, or even more frequently, in an ssh session that outputs a
lot of text. Commit 14ad6ed30a10 subtly changes how skb head memory is
allocated, making it much more likely that the rndis header will cross
a page boundary when the vCPU count is 16 or more. The changes in
commit 14ad6ed30a10 are perfectly valid -- they just had the side
effect of making the netvsc bug more prominent.
Current code in init_page_array() creates a separate page buffer array
entry for each PFN required to identify the data to be transmitted.
Contiguous PFNs get separate entries in the page buffer array, and any
information about contiguity is lost.
Fix the core issue by having init_page_array() construct the page
buffer array to represent contiguous ranges rather than individual
pages. When these ranges are subsequently passed to
netvsc_build_mpb_array(), it can build GPA ranges that contain
multiple PFNs, as required to avoid the error "nvsp_rndis_pkt_complete
error status: 2". If instead the network packet is sent by copying
into a pre-allocated send buffer slot, the copy proceeds using the
contiguous ranges rather than individual pages, but the result of the
copying is the same. Also fix rndis_filter_send_request() to construct
a contiguous range, since it has its own page buffer array.
This change has a side benefit in CoCo VMs in that netvsc_dma_map()
calls dma_map_single() on each contiguous range instead of on each
page. This results in fewer calls to dma_map_single() but on larger
chunks of memory, which should reduce contention on the swiotlb.
Since the page buffer array now contains one entry for each contiguous
range instead of for each individual page, the number of entries in
the array can be reduced, saving 208 bytes of stack space in
netvsc_xmit() when MAX_SKG_FRAGS has the default value of 17.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=217503
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217503
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-4-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netvsc currently uses vmbus_sendpacket_pagebuffer() to send VMBus
messages. This function creates a series of GPA ranges, each of which
contains a single PFN. However, if the rndis header in the VMBus
message crosses a page boundary, the netvsc protocol with the host
requires that both PFNs for the rndis header must be in a single "GPA
range" data structure, which isn't possible with
vmbus_sendpacket_pagebuffer(). As the first step in fixing this, add a
new function netvsc_build_mpb_array() to build a VMBus message with
multiple GPA ranges, each of which may contain multiple PFNs. Use
vmbus_sendpacket_mpb_desc() to send this VMBus message to the host.
There's no functional change since higher levels of netvsc don't
maintain or propagate knowledge of contiguous PFNs. Based on its
input, netvsc_build_mpb_array() still produces a separate GPA range
for each PFN and the behavior is the same as with
vmbus_sendpacket_pagebuffer(). But the groundwork is laid for a
subsequent patch to provide the necessary grouping.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-3-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
vmbus_sendpacket_mpb_desc() is currently used only by the storvsc driver
and is hardcoded to create a single GPA range. To allow it to also be
used by the netvsc driver to create multiple GPA ranges, no longer
hardcode as having a single GPA range. Allow the calling driver to
specify the rangecount in the supplied descriptor.
Update the storvsc driver to reflect this new approach.
Cc: <stable@vger.kernel.org> # 6.1.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20250513000604.1396-2-mhklinux@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each CGX block supports 4 logical MACs (LMACS). Receive
counters CGX_CMR_RX_STAT0-8 are per LMAC and CGX_CMR_RX_STAT9-12
are per CGX.
Due a bug in previous patch, stale Per CGX counters values observed.
Fixes: 66208910e57a ("octeontx2-af: Support to retrieve CGX LMAC stats")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250513071554.728922-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since MTK_ESW_BIT is a bit number rather than a bitmap, it causes
MTK_HAS_CAPS to produce incorrect results. This leads to the ETH
driver not declaring MAC capabilities correctly for the MT7988 ESW.
Fixes: 445eb6448ed3 ("net: ethernet: mtk_eth_soc: add basic support for MT7988 SoC")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/b8b37f409d1280fad9c4d32521e6207f63cd3213.1747110258.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the new SW-FW interaction, missing the error return if there is an
unknown command. It causes the driver to mistakenly believe that the
interaction is complete. This problem occurs when new driver is paired
with old firmware, which does not support the new mailbox commands.
Fixes: 2e5af6b2ae85 ("net: txgbe: Add basic support for new AML devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/64DBB705D35A0016+20250513021009.145708-4-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the new SW-FW interaction, the timeout waiting for the firmware to
return is too short. So that some mailbox commands cannot be completed.
Use the 'timeout' parameter instead of fixed timeout value for flexible
configuration.
Fixes: 2e5af6b2ae85 ("net: txgbe: Add basic support for new AML devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/5D5BDE3EA501BDB8+20250513021009.145708-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the new firmware version, the shadow ram reserves some space to store
I2C information, so the checksum calculation needs to skip this section.
Otherwise, the driver will fail to probe because the invalid EEPROM
checksum.
Fixes: 2e5af6b2ae85 ("net: txgbe: Add basic support for new AML devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1C6BF7A937237F5A+20250513021009.145708-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MASCEC hardware block has a field called maximum transmit size for
TX secy. Max packet size going out of MCS block has be programmed
taking into account full packet size which has L2 header,SecTag
and ICV. MACSEC offload driver is configuring max transmit size as
macsec interface MTU which is incorrect. Say with 1500 MTU of real
device, macsec interface created on top of real device will have MTU of
1468(1500 - (SecTag + ICV)). This is causing packets from macsec
interface of size greater than or equal to 1468 are not getting
transmitted out because driver programmed max transmit size as 1468
instead of 1514(1500 + ETH_HDR_LEN).
Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747053756-4529-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some TC filters have actions listed as indexed arrays of nests
and some as just nests. They are all indexed arrays, the handling
is common across filters.
Fixes: 2267672a6190 ("doc/netlink/specs: Update the tc spec")
Link: https://patch.msgid.link/20250513221638.842532-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix up spelling of two attribute names. These are clearly typoes
and will prevent C codegen from working. Let's treat this as
a fix to get the correction into users' hands ASAP, and prevent
anyone depending on the wrong names.
Fixes: a1bcfde83669 ("doc/netlink/specs: Add a spec for tc")
Link: https://patch.msgid.link/20250513221316.841700-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With some Infineon chips the timeouts in tpm_tis_send_data (both B and
C) can reach up to about 2250 ms.
Timeout C is retried since
commit de9e33df7762 ("tpm, tpm_tis: Workaround failed command reception on Infineon devices")
Timeout B still needs to be extended.
The problem is most commonly encountered with context related operation
such as load context/save context. These are issued directly by the
kernel, and there is no retry logic for them.
When a filesystem is set up to use the TPM for unlocking the boot fails,
and restarting the userspace service is ineffective. This is likely
because ignoring a load context/save context result puts the real TPM
state and the TPM state expected by the kernel out of sync.
Chips known to be affected:
tpm_tis IFX1522:00: 2.0 TPM (device-id 0x1D, rev-id 54)
Description: SLB9672
Firmware Revision: 15.22
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
Firmware Revision: 7.83
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
Firmware Revision: 5.63
Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Fix Smatch-detected issue:
drivers/char/tpm/tpm-buf.c:208 tpm_buf_read_u8() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:225 tpm_buf_read_u16() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:242 tpm_buf_read_u32() error:
uninitialized symbol 'value'.
Zero-initialize the return values in tpm_buf_read_u8(), tpm_buf_read_u16(),
and tpm_buf_read_u32() to guard against uninitialized data in case of a
boundary overflow.
Add defensive initialization ensures the return values are always defined,
preventing undefined behavior if the unexpected happens.
Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm2_start_auth_session() does not mask TPM RC correctly from the callers:
[ 28.766528] tpm tpm0: A TPM error (2307) occurred start auth session
Process TPM RCs inside tpm2_start_auth_session(), and map them to POSIX
error codes.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 699e3efd6c64 ("tpm: Add HMAC session start and end functions")
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Closes: https://lore.kernel.org/linux-integrity/Z_NgdRHuTKP6JK--@gondor.apana.org.au/
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
fsck_err() needs the btree transaction passed to it if there is one - so
that it can unlock/relock around prompting userspace for fixing the
error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fsck wants to do transaction commits from an outer context; it may have
other repair to do (i.e. duplicate backpointers).
But when calling backpointer_not_found() from runtime code, i.e. runtime
self healing, we should be doing the commit - the outer context expects
to just be doing lookups.
This fixes bugs where we get stuck spinning, reported as "RCU lock hold
time warnings.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Since bch2_seek_pagecache_data() searches for dirty data, we only want
to call it for holes in the extents btree - otherwise we have an
accidental O(n^2), as we repeatedly search the same range.
Reported-by: Marcin Mirosław <marcin@mejor.pl>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
set_should_be_locked() needs to be called before peek_key_cache(), which
traverses other paths and may do a trans unlock/relock.
This fixes an assertion pop in path_peek_slot(), when the path we're
using is unexpectedly not uptodate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Before invoking bch2_accounting_mem_mod_locked in
bch2_gc_accounting_done, we already write locked mark_lock,
in bch2_accounting_mem_insert, we lock mark_lock again.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prevent jobs that do lots of scanning (i.e. evacuatee, scrub) from
causing OOMs.
The shrinker code seems to be having issues when it doesn't do any
freeing because it's just flipping off the acccessed bit - and the
accessed bit shouldn't be set on first use anyways.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When the journal is low on space, we might do discards from
journal_res_get() -> journal_entry_open().
Make sure we set j->can_discard correctly, so that if we're low on space
but not because discards aren't keeping up we don't livelock.
Fixes: 8e4d28036c29 ("bcachefs: Don't aggressively discard the journal")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes btree locking assert pops users were seeing during evacuate:
https://github.com/koverstreet/bcachefs/issues/878
May 09 22:45:02 sharon kernel: bcachefs (68116e25-fa2d-4c6f-86c7-e8b431d792ae): bch2_btree_insert_node(): node not locked at level 1
May 09 22:45:02 sharon kernel: bch2_btree_node_rewrite [bcachefs]: watermark=btree no_check_rw alloc l=0-1 mode=none nodes_written=0 cl.remaining=2 journal_seq=0
May 09 22:45:02 sharon kernel: path: idx 1 ref 1:0 S B btree=alloc level=0 pos 0:3699637:0 0:3698012:1-0:3699637:0 bch2_move_btree.isra.0+0x1db/0x490 [bcachefs] uptodate 0 locks_want 2
May 09 22:45:02 sharon kernel: l=0 locks intent seq 4 node ffff8bd700c93600
May 09 22:45:02 sharon kernel: l=1 locks unlocked seq 1712 node ffff8bd6fd5e7a00
May 09 22:45:02 sharon kernel: l=2 locks unlocked seq 2295 node ffff8bd6cc725400
May 09 22:45:02 sharon kernel: l=3 locks unlocked seq 0 node 0000000000000000
Evacuate walks btree nodes with bch2_btree_iter_next_node() and rewrites
them, bch2_btree_update_start() upgrades the path to take intent locks
as far as it needs to.
But next_node() does low level unlock/relock calls on individual nodes,
and didn't handle the case where a path is supposed to be holding
multiple intent locks. If a path has locks_want > 1, it needs to be
either holding locks on all the btree nodes (at each level) requested,
or none of them.
Fix this with a bch2_btree_path_downgrade().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fix bch2_bkey_clear_needs_rebalance(): indirect extents are never
supposed to have bch_extent_rebalance stripped off, because that's how
we get the IO path options when we don't have the original inode it
belonged to.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The ring buffer is made up of sub buffers (sometimes called pages as they
are by default PAGE_SIZE). It has the following "pages":
"tail page" - this is the page that the next write will write to
"head page" - this is the page that the reader will swap the reader page with.
"reader page" - This belongs to the reader, where it will swap the head
page from the ring buffer so that the reader does not
race with the writer.
The writer may end up on the "reader page" if the ring buffer hasn't
written more than one page, where the "tail page" and the "head page" are
the same.
The persistent ring buffer has meta data that points to where these pages
exist so on reboot it can re-create the pointers to the cpu_buffer
descriptor. But when the commit page is on the reader page, the logic is
incorrect.
The check to see if the commit page is on the reader page checked if the
head page was the reader page, which would never happen, as the head page
is always in the ring buffer. The correct check would be to test if the
commit page is on the reader page. If that's the case, then it can exit
out early as the commit page is only on the reader page when there's only
one page of data in the buffer. There's no reason to iterate the ring
buffer pages to find the "commit page" as it is already found.
To trigger this bug:
# echo 1 > /sys/kernel/tracing/instances/boot_mapped/events/syscalls/sys_enter_fchownat/enable
# touch /tmp/x
# chown sshd /tmp/x
# reboot
On boot up, the dmesg will have:
Ring buffer meta [0] is from previous boot!
Ring buffer meta [1] is from previous boot!
Ring buffer meta [2] is from previous boot!
Ring buffer meta [3] is from previous boot!
Ring buffer meta [4] commit page not found
Ring buffer meta [5] is from previous boot!
Ring buffer meta [6] is from previous boot!
Ring buffer meta [7] is from previous boot!
Where the buffer on CPU 4 had a "commit page not found" error and that
buffer is cleared and reset causing the output to be empty and the data lost.
When it works correctly, it has:
# cat /sys/kernel/tracing/instances/boot_mapped/trace_pipe
<...>-1137 [004] ..... 998.205323: sys_enter_fchownat: __syscall_nr=0x104 (260) dfd=0xffffff9c (4294967196) filename=(0xffffc90000a0002c) user=0x3e8 (1000) group=0xffffffff (4294967295) flag=0x0 (0
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250513115032.3e0b97f7@gandalf.local.home
Fixes: 5f3b6e839f3ce ("ring-buffer: Validate boot range memory events")
Reported-by: Tasos Sahanidis <tasos@tasossah.com>
Tested-by: Tasos Sahanidis <tasos@tasossah.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The preemption count of the stacktrace filter command to trace ksys_read
is consistently incorrect:
$ echo ksys_read:stacktrace > set_ftrace_filter
<...>-453 [004] ...1. 38.308956: <stack trace>
=> ksys_read
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
The root cause is that the trace framework disables preemption when
invoking the filter command callback in function_trace_probe_call:
preempt_disable_notrace();
probe_ops->func(ip, parent_ip, probe_opsbe->tr, probe_ops, probe->data);
preempt_enable_notrace();
Use tracing_gen_ctx_dec() to account for the preempt_disable_notrace(),
which will output the correct preemption count:
$ echo ksys_read:stacktrace > set_ftrace_filter
<...>-410 [006] ..... 31.420396: <stack trace>
=> ksys_read
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
Cc: stable@vger.kernel.org
Fixes: 36590c50b2d07 ("tracing: Merge irqflags + preempt counter.")
Link: https://lore.kernel.org/20250512094246.1167956-2-dolinux.peng@gmail.com
Signed-off-by: pengdonglin <dolinux.peng@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When using the stacktrace trigger command to trace syscalls, the
preemption count was consistently reported as 1 when the system call
event itself had 0 (".").
For example:
root@ubuntu22-vm:/sys/kernel/tracing/events/syscalls/sys_enter_read
$ echo stacktrace > trigger
$ echo 1 > enable
sshd-416 [002] ..... 232.864910: sys_read(fd: a, buf: 556b1f3221d0, count: 8000)
sshd-416 [002] ...1. 232.864913: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
The root cause is that the trace framework disables preemption in __DO_TRACE before
invoking the trigger callback.
Use the tracing_gen_ctx_dec() that will accommodate for the increase of
the preemption count in __DO_TRACE when calling the callback. The result
is the accurate reporting of:
sshd-410 [004] ..... 210.117660: sys_read(fd: 4, buf: 559b725ba130, count: 40000)
sshd-410 [004] ..... 210.117662: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
Cc: stable@vger.kernel.org
Fixes: ce33c845b030c ("tracing: Dump stacktrace trigger to the corresponding instance")
Link: https://lore.kernel.org/20250512094246.1167956-1-dolinux.peng@gmail.com
Signed-off-by: pengdonglin <dolinux.peng@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The function snd_es1968_capture_open() calls the function
snd_pcm_hw_constraint_pow2(), but does not check its return
value. A proper implementation can be found in snd_cx25821_pcm_open().
Add error handling for snd_pcm_hw_constraint_pow2() and propagate its
error code.
Fixes: b942cf815b57 ("[ALSA] es1968 - Fix stuttering capture")
Cc: stable@vger.kernel.org # v2.6.22
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250514092444.331-1-vulab@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The hardware supports multiple MAC types, including RPM, SDP, and LBK.
However, features such as link settings and pause frames are only available
on RPM MAC, and not supported on SDP or LBK.
This patch updates the ethtool operations logic accordingly to reflect
this behavior.
Fixes: 2f7f33a09516 ("octeontx2-pf: Add representors for sdp MAC")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
max20086_parse_regulators_dt() calls of_regulator_match() using an
array of struct of_regulator_match allocated on the stack for the
matches argument.
of_regulator_match() calls devm_of_regulator_put_matches(), which calls
devres_alloc() to allocate a struct devm_of_regulator_matches which will
be de-allocated using devm_of_regulator_put_matches().
struct devm_of_regulator_matches is populated with the stack allocated
matches array.
If the device fails to probe, devm_of_regulator_put_matches() will be
called and will try to call of_node_put() on that stack pointer,
generating the following dmesg entries:
max20086 6-0028: Failed to read DEVICE_ID reg: -121
kobject: '\xc0$\xa5\x03' (000000002cebcb7a): is not initialized, yet
kobject_put() is being called.
Followed by a stack trace matching the call flow described above.
Switch to allocating the matches array using devm_kcalloc() to
avoid accessing the stack pointer long after it's out of scope.
This also has the advantage of allowing multiple max20086 to probe
without overriding the data stored inside the global of_regulator_match.
Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Link: https://patch.msgid.link/20250508064947.2567255-1-demonsingur@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SPI interface is activated before the CPOL setting is applied. In
that moment, the clock idles high and CS goes low. After a short delay,
CPOL and other settings are applied, which may cause the clock to change
state and idle low. This transition is not part of a clock cycle, and it
can confuse the receiving device.
To prevent this unexpected transition, activate the interface while CPOL
and the other settings are being applied.
Signed-off-by: Alessandro Grassi <alessandro.grassi@mailbox.org>
Link: https://patch.msgid.link/20250502095520.13825-1-alessandro.grassi@mailbox.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In one of the error paths in qlcnic_sriov_channel_cfg_cmd(), the memory
allocated in qlcnic_sriov_alloc_bc_mbx_args() for mailbox arguments is
not freed. Fix that by jumping to the error path that frees them, by
calling qlcnic_free_mbx_args(). This was found using static analysis.
Fixes: f197a7aa6288 ("qlcnic: VF-PF communication channel implementation")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250512044829.36400-1-abdun.nihaal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The first paragraph makes no grammatical sense. I suppose a portion of
the intended sentece is missing: "[The challenge with ] stacked PHCs
(...) is that they uncover bugs".
Rephrase, and at the same time simplify the structure of the sentence a
little bit, it is not easy to follow.
Fixes: 94d9f78f4d64 ("docs: networking: timestamping: add section for stacked PHC devices")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20250512131751.320283-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MACsec offload is not supported in switchdev mode for uplink
representors. When switching to the uplink representor profile, the
MACsec offload feature must be cleared from the netdevice's features.
If left enabled, attempts to add offloads result in a null pointer
dereference, as the uplink representor does not support MACsec offload
even though the feature bit remains set.
Clear NETIF_F_HW_MACSEC in mlx5e_fix_uplink_rep_features().
Kernel log:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 29 UID: 0 PID: 4714 Comm: ip Not tainted 6.14.0-rc4_for_upstream_debug_2025_03_02_17_35 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__mutex_lock+0x128/0x1dd0
Code: d0 7c 08 84 d2 0f 85 ad 15 00 00 8b 35 91 5c fe 03 85 f6 75 29 49 8d 7e 60 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a6 15 00 00 4d 3b 76 60 0f 85 fd 0b 00 00 65 ff
RSP: 0018:ffff888147a4f160 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 000000000000000f RSI: 0000000000000000 RDI: 0000000000000078
RBP: ffff888147a4f2e0 R08: ffffffffa05d2c19 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: 0000000000000018 R15: ffff888152de0000
FS: 00007f855e27d800(0000) GS:ffff88881ee80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004e5768 CR3: 000000013ae7c005 CR4: 0000000000372eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
Call Trace:
<TASK>
? die_addr+0x3d/0xa0
? exc_general_protection+0x144/0x220
? asm_exc_general_protection+0x22/0x30
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? __mutex_lock+0x128/0x1dd0
? lockdep_set_lock_cmp_fn+0x190/0x190
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? mutex_lock_io_nested+0x1ae0/0x1ae0
? lock_acquire+0x1c2/0x530
? macsec_upd_offload+0x145/0x380
? lockdep_hardirqs_on_prepare+0x400/0x400
? kasan_save_stack+0x30/0x40
? kasan_save_stack+0x20/0x40
? kasan_save_track+0x10/0x30
? __kasan_kmalloc+0x77/0x90
? __kmalloc_noprof+0x249/0x6b0
? genl_family_rcv_msg_attrs_parse.constprop.0+0xb5/0x240
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? mlx5e_macsec_add_rxsa+0x11a0/0x11a0 [mlx5_core]
macsec_update_offload+0x26c/0x820
? macsec_set_mac_address+0x4b0/0x4b0
? lockdep_hardirqs_on_prepare+0x284/0x400
? _raw_spin_unlock_irqrestore+0x47/0x50
macsec_upd_offload+0x2c8/0x380
? macsec_update_offload+0x820/0x820
? __nla_parse+0x22/0x30
? genl_family_rcv_msg_attrs_parse.constprop.0+0x15e/0x240
genl_family_rcv_msg_doit+0x1cc/0x2a0
? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240
? cap_capable+0xd4/0x330
genl_rcv_msg+0x3ea/0x670
? genl_family_rcv_msg_dumpit+0x2a0/0x2a0
? lockdep_set_lock_cmp_fn+0x190/0x190
? macsec_update_offload+0x820/0x820
netlink_rcv_skb+0x12b/0x390
? genl_family_rcv_msg_dumpit+0x2a0/0x2a0
? netlink_ack+0xd80/0xd80
? rwsem_down_read_slowpath+0xf90/0xf90
? netlink_deliver_tap+0xcd/0xac0
? netlink_deliver_tap+0x155/0xac0
? _copy_from_iter+0x1bb/0x12c0
genl_rcv+0x24/0x40
netlink_unicast+0x440/0x700
? netlink_attachskb+0x760/0x760
? lock_acquire+0x1c2/0x530
? __might_fault+0xbb/0x170
netlink_sendmsg+0x749/0xc10
? netlink_unicast+0x700/0x700
? __might_fault+0xbb/0x170
? netlink_unicast+0x700/0x700
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x53f/0x760
? import_iovec+0x7/0x10
? kernel_sendmsg+0x30/0x30
? __copy_msghdr+0x3c0/0x3c0
? filter_irq_stacks+0x90/0x90
? stack_depot_save_flags+0x28/0xa30
___sys_sendmsg+0xeb/0x170
? kasan_save_stack+0x30/0x40
? copy_msghdr_from_user+0x110/0x110
? do_syscall_64+0x6d/0x140
? lock_acquire+0x1c2/0x530
? __virt_addr_valid+0x116/0x3b0
? __virt_addr_valid+0x1da/0x3b0
? lock_downgrade+0x680/0x680
? __delete_object+0x21/0x50
__sys_sendmsg+0xf7/0x180
? __sys_sendmsg_sock+0x20/0x20
? kmem_cache_free+0x14c/0x4e0
? __x64_sys_close+0x78/0xd0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f855e113367
Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
RSP: 002b:00007ffd15e90c88 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f855e113367
RDX: 0000000000000000 RSI: 00007ffd15e90cf0 RDI: 0000000000000004
RBP: 00007ffd15e90dbc R08: 0000000000000028 R09: 000000000045d100
R10: 00007f855e011dd8 R11: 0000000000000246 R12: 0000000000000019
R13: 0000000067c6b785 R14: 00000000004a1e80 R15: 0000000000000000
</TASK>
Modules linked in: 8021q garp mrp sch_ingress openvswitch nsh mlx5_ib mlx5_fwctl mlx5_dpll mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: mlx5_core]
---[ end trace 0000000000000000 ]---
Fixes: 8ff0ac5be144 ("net/mlx5: Add MACsec offload Tx command support")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1746958552-561295-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These tests:
"SOCK_STREAM ioctl(SIOCOUTQ) 0 unsent bytes"
"SOCK_SEQPACKET ioctl(SIOCOUTQ) 0 unsent bytes"
output: "Unexpected 'SIOCOUTQ' value, expected 0, got 64 (CLIENT)".
They test that the SIOCOUTQ ioctl reports 0 unsent bytes after the data
have been received by the other side. However, sometimes there is a delay
in updating this "unsent bytes" counter, and the test fails even though
the counter properly goes to 0 several milliseconds later.
The delay occurs in the kernel because the used buffer notification
callback virtio_vsock_tx_done(), called upon receipt of the data by the
other side, doesn't update the counter itself. It delegates that to
a kernel thread (via vsock->tx_work). Sometimes that thread is delayed
more than the test expects.
Change the test to poll SIOCOUTQ until it returns 0 or a timeout occurs.
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: 18ee44ce97c1 ("test/vsock: add ioctl unsent bytes test")
Link: https://patch.msgid.link/20250507151456.2577061-1-kshk@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit ce6cb8113c84 ("tools: ynl-gen: individually free previous
values on double set"), specifying the "multi-attr" property raises an
error unless the "nested-attributes" property is specified as well:
File "tools/net/ynl/./pyynl/ynl_gen_c.py", line 1147, in _load_nested_sets
child = self.pure_nested_structs.get(nested)
^^^^^^
UnboundLocalError: cannot access local variable 'nested' where it is not associated with a value
This appears to be a bug since there are existing specs which omit
"nested-attributes" on "multi-attr" attributes. Also, according to
Documentation/userspace-api/netlink/specs.rst, multi-attr "is the
recommended way of implementing arrays (no extra nesting)", suggesting
that nesting should even be avoided in favor of multi-attr.
Fix the indentation of the if-block introduced by the commit to avoid
the error.
Fixes: ce6cb8113c84 ("tools: ynl-gen: individually free previous values on double set")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/d6b58684b7e5bfb628f7313e6893d0097904e1d1.1746940107.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix several build errors when CONFIG_MODULES=n, including the following:
../arch/x86/kernel/alternative.c:195:25: error: incomplete definition of type 'struct module'
195 | for (int i = 0; i < mod->its_num_pages; i++) {
Fixes: 872df34d7c51 ("x86/its: Use dynamic thunks for indirect branches")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The current HID bpf implementation assumes no output report/request will
go through it after hid_bpf_destroy_device() has been called. This leads
to a bug that unplugging certain types of HID devices causes a cleaned-
up SRCU to be accessed. The bug was previously a hidden failure until a
recent x86 percpu change [1] made it access not-present pages.
The bug will be triggered if the conditions below are met:
A) a device under the driver has some LEDs on
B) hid_ll_driver->request() is uninplemented (e.g., logitech-djreceiver)
If condition A is met, hidinput_led_worker() is always scheduled *after*
hid_bpf_destroy_device().
hid_destroy_device
` hid_bpf_destroy_device
` cleanup_srcu_struct(&hdev->bpf.srcu)
` hid_remove_device
` ...
` led_classdev_unregister
` led_trigger_set(led_cdev, NULL)
` led_set_brightness(led_cdev, LED_OFF)
` ...
` input_inject_event
` input_event_dispose
` hidinput_input_event
` schedule_work(&hid->led_work) [hidinput_led_worker]
This is fine when condition B is not met, where hidinput_led_worker()
calls hid_ll_driver->request(). This is the case for most HID drivers,
which implement it or use the generic one from usbhid. The driver itself
or an underlying driver will then abort processing the request.
Otherwise, hidinput_led_worker() tries hid_hw_output_report() and leads
to the bug.
hidinput_led_worker
` hid_hw_output_report
` dispatch_hid_bpf_output_report
` srcu_read_lock(&hdev->bpf.srcu)
` srcu_read_unlock(&hdev->bpf.srcu, idx)
The bug has existed since the introduction [2] of
dispatch_hid_bpf_output_report(). However, the same bug also exists in
dispatch_hid_bpf_raw_requests(), and I've reproduced (no visible effect
because of the lack of [1], but confirmed bpf.destroyed == 1) the bug
against the commit (i.e., the Fixes:) introducing the function. This is
because hidinput_led_worker() falls back to hid_hw_raw_request() when
hid_ll_driver->output_report() is uninplemented (e.g., logitech-
djreceiver).
hidinput_led_worker
` hid_hw_output_report: -ENOSYS
` hid_hw_raw_request
` dispatch_hid_bpf_raw_requests
` srcu_read_lock(&hdev->bpf.srcu)
` srcu_read_unlock(&hdev->bpf.srcu, idx)
Fix the issue by returning early in the two mentioned functions if
hid_bpf has been marked as destroyed. Though
dispatch_hid_bpf_device_event() handles input events, and there is no
evidence that it may be called after the destruction, the same check, as
a safety net, is also added to it to maintain the consistency among all
dispatch functions.
The impact of the bug on other architectures is unclear. Even if it acts
as a hidden failure, this is still dangerous because it corrupts
whatever is on the address calculated by SRCU. Thus, CC'ing the stable
list.
[1]: commit 9d7de2aa8b41 ("x86/percpu/64: Use relative percpu offsets")
[2]: commit 9286675a2aed ("HID: bpf: add HID-BPF hooks for
hid_hw_output_report")
Closes: https://lore.kernel.org/all/20250506145548.GGaBoi9Jzp3aeJizTR@fat_crate.local/
Fixes: 8bd0488b5ea5 ("HID: bpf: add HID-BPF hooks for hid_hw_raw_requests")
Cc: stable@vger.kernel.org
Signed-off-by: Rong Zhang <i@rong.moe>
Tested-by: Petr Tesarik <petr@tesarici.cz>
Link: https://patch.msgid.link/20250512152420.87441-1-i@rong.moe
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
When bridged ports and standalone ports share a VLAN, e.g. via VLAN
uppers, or untagged traffic with a vlan unaware bridge, the ASIC will
still try to forward traffic to known FDB entries on standalone ports.
But since the port VLAN masks prevent forwarding to bridged ports, this
traffic will be dropped.
This e.g. can be observed in the bridge_vlan_unaware ping tests, where
this breaks pinging with learning on.
Work around this by enabling the simplified EAP mode on switches
supporting it for standalone ports, which causes the ASIC to redirect
traffic of unknown source MAC addresses to the CPU port.
Since standalone ports do not learn, there are no known source MAC
addresses, so effectively this redirects all incoming traffic to the CPU
port.
Fixes: ff39c2d68679 ("net: dsa: b53: Add bridge support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250508091424.26870-1-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since the shared trace_probe_log variable can be accessed and
modified via probe event create operation of kprobe_events,
uprobe_events, and dynamic_events, it should be protected.
In the dynamic_events, all operations are serialized by
`dyn_event_ops_mutex`. But kprobe_events and uprobe_events
interfaces are not serialized.
To solve this issue, introduces dyn_event_create(), which runs
create() operation under the mutex, for kprobe_events and
uprobe_events. This also uses lockdep to check the mutex is
held when using trace_probe_log* APIs.
Link: https://lore.kernel.org/all/174684868120.551552.3068655787654268804.stgit@devnote2/
Reported-by: Paul Cacheux <paulcacheux@gmail.com>
Closes: https://lore.kernel.org/all/20250510074456.805a16872b591e2971a4d221@kernel.org/
Fixes: ab105a4fb894 ("tracing: Use tracing error_log with probe events")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
Gerhard Engleder
Pengtao He
Michael Chan
Ido Schimmel
Kees Cook
Nicolas Chauvet
Subbaraya Sundeep
Ming Yen Hsieh
Fedor Pchelkin
Michael Kelley
Hariprasad Kelam
Bo-Cun Chen
Jiawen Wu
Jakub Kicinski
Michal Suchanek
Purva Yeshi
Jarkko Sakkinen
Kent Overstreet
Alan Huang
Steven Rostedt
pengdonglin
Wentao Liang
Cosmin Tanislav
Alessandro Grassi
Abdun Nihaal
Vladimir Oltean
Carolina Jubran
Konstantin Shkolnyy
Lukas Wunner
Eric Biggers
Rong Zhang
Jonas Gorski
Masami Hiramatsu (Google)