| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Before this patch, the freeze code in gfs2 specified GL_NOCACHE in
several places. That's wrong because we always want to know the state
of whether the file system is frozen.
There was also a problem with freeze/thaw transitioning the glock from
frozen (EX) to thawed (SH) because gfs2 will normally grant glocks in EX
to processes that request it in SH mode, unless GL_EXACT is specified.
Therefore, the freeze/thaw code, which tried to reacquire the glock in
SH mode would get the glock in EX mode, and miss the transition from EX
to SH. That made it think the thaw had completed normally, but since the
glock was still cached in EX, other nodes could not freeze again.
This patch removes the GL_NOCACHE flag to allow the freeze glock to be
cached. It also adds the GL_EXACT flag so the glock is fully transitioned
from EX to SH, thereby allowing future freeze operations.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Before this patch, only read-write mounts would grab the freeze
glock in read-only mode, as part of gfs2_make_fs_rw. So the freeze
glock was never initialized. That meant requests to freeze, which
request the glock in EX, were granted without any state transition.
That meant you could mount a gfs2 file system, which is currently
frozen on a different cluster node, in read-only mode.
This patch makes read-only mounts lock the freeze glock in SH mode,
which will block for file systems that are frozen on another node.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Before this patch, function freeze_go_sync, called when promoting
the freeze glock, was testing for the SDF_JOURNAL_LIVE superblock flag.
That's only set for read-write mounts. Read-only mounts don't use a
journal, so the bit is never set, so the freeze never happened.
This patch removes the check for SDF_JOURNAL_LIVE for freeze requests
but still checks it when deciding whether to flush a journal.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
In several places, we used the GIF_ORDERED inode flag to determine
if an inode was on the ordered writes list. However, since we always
held the sd_ordered_lock spin_lock during the manipulation, we can
just as easily check list_empty(&ip->i_ordered) instead.
This allows us to keep more than one ordered writes list to make
journal writing improvements.
This patch eliminates GIF_ORDERED in favor of checking list_empty.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Acer C720 running Linux v5.3 reports this in klog:
tpm_tis: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: tpm_try_transmit: send(): error -5
tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts
tpm_tis tpm_tis: Could not get TPM timeouts and durations
tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: tpm_try_transmit: send(): error -5
tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts
tpm_tis 00:08: Could not get TPM timeouts and durations
ima: No TPM chip found, activating TPM-bypass!
tpm_inf_pnp 00:08: Found TPM with ID IFX0102
% git --no-pager grep IFX0102 drivers/char/tpm
drivers/char/tpm/tpm_infineon.c: {"IFX0102", 0},
drivers/char/tpm/tpm_tis.c: {"IFX0102", 0}, /* Infineon */
Obviously IFX0102 was added to the HID table for the TCG TIS driver by
mistake.
Fixes: 93e1b7d42e1e ("[PATCH] tpm: add HID module parameter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203877
Cc: stable@vger.kernel.org
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Reported-by: Ferry Toth: <ferry.toth@elsinga.info>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
On a Chromebook I'm working on I noticed a big (~1 second) delay
during bootup where nothing was happening. Right around this big
delay there were messages about the TPM:
[ 2.311352] tpm_tis_spi spi0.0: TPM ready IRQ confirmed on attempt 2
[ 3.332790] tpm_tis_spi spi0.0: Cr50 firmware version: ...
I put a few printouts in and saw that tpm_tis_spi_init() (specifically
tpm_chip_register() in that function) was taking the lion's share of
this time, though ~115 ms of the time was in cr50_print_fw_version().
Let's make a one-line change to prefer async probe for tpm_tis_spi.
There's no reason we need to block other drivers from probing while we
load.
NOTES:
* It's possible that other hardware runs through the init sequence
faster than Cr50 and this isn't such a big problem for them.
However, even if they are faster they are still doing _some_
transfers over a SPI bus so this should benefit everyone even if to
a lesser extent.
* It's possible that there are extra delays in the code that could be
optimized out. I didn't dig since once I enabled async probe they
no longer impacted me.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
The tpm2_get_cc_attrs_tbl() call will result in TPM commands being issued,
which will need the use of the internal command/response buffer. But,
we're issuing this *before* we've waited to make sure that buffer is
allocated.
This can result in intermittent failures to probe if the hypervisor / TPM
implementation doesn't respond quickly enough. I find it fails almost
every time with an 8 vcpu guest under KVM with software emulated TPM.
To fix it, just move the tpm2_get_cc_attrs_tlb() call after the
existing code to wait for initialization, which will ensure the buffer
is allocated.
Fixes: 18b3670d79ae9 ("tpm: ibmvtpm: Add support for TPM2")
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Trivial fix, the spelling of "drescription" is incorrect
in function comment.
Fix this.
Signed-off-by: Binbin Zhou <zhoubinbin@uniontech.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Found by smatch:
drivers/char/tpm/tpm_tis_core.c:1088 tpm_tis_core_init() warn:
variable dereferenced before check 'chip->ops' (see line 979)
'chip->ops' is assigned in the beginning of function
in tpmm_chip_alloc->tpm_chip_alloc
and is used before first possible goto to error path.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
During flow control we are just reading from the TPM, yet our spi_xfer
has the tx_buf and rx_buf both non-NULL which means we're requesting a
full duplex transfer.
SPI is always somewhat of a full duplex protocol anyway and in theory
the other side shouldn't really be looking at what we're sending it
during flow control, but it's still a bit ugly to be sending some
"random" data when we shouldn't.
The default tpm_tis_spi_flow_control() tries to address this by
setting 'phy->iobuf[0] = 0'. This partially avoids the problem of
sending "random" data, but since our tx_buf and rx_buf both point to
the same place I believe there is the potential of us sending the
TPM's previous byte back to it if we hit the retry loop.
Another flow control implementation, cr50_spi_flow_control(), doesn't
address this at all.
Let's clean this up and just make the tx_buf NULL before we call
flow_control(). Not only does this ensure that we're not sending any
"random" bytes but it also possibly could make the SPI controller
behave in a slightly more optimal way.
NOTE: no actual observed problems are fixed by this patch--it's was
just made based on code inspection.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
It has been reported that some TIS based TPMs are giving unexpected
errors when using the O_NONBLOCK path of the TPM device. The problem
is that some TPMs don't like it when you get and then relinquish a
locality (as the tpm_try_get_ops()/tpm_put_ops() pair does) without
sending a command. This currently happens all the time in the
O_NONBLOCK write path. Fix this by moving the tpm_try_get_ops()
further down the code to after the O_NONBLOCK determination is made.
This is safe because the priv->buffer_mutex still protects the priv
state being modified.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206275
Fixes: d23d12484307 ("tpm: fix invalid locking in NONBLOCKING mode")
Reported-by: Mario Limonciello <Mario.Limonciello@dell.com>
Tested-by: Alex Guzman <alex@guzman.io>
Cc: stable@vger.kernel.org
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
The freescale.com domain is gone for quite some time.
Use the nxp.com domain instead.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200701005346.1008-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Large clock values may overflow and show up as negative.
Reported by prOMiNd on IRC.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Renoir uses integrated_system_info table v12. The table
has the same layout as v11 with respect to this data. Just
reuse the existing code for v12 for stable.
Fixes incorrectly reported vram info in the driver output.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
Changes that are fast don't require updating DLG parameters making
this call unnecessary. Considering this is an expensive call it should
not be done on every flip.
DML touches clocks, p-state support, DLG params and a few other DC
internal flags and these aren't expected during fast. A hang has been
reported with this change when called on every flip which suggests that
modifying these fields is not recommended behavior on fast updates.
[How]
Guard the validation to only happen if update type isn't FAST.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1191
Fixes: a24eaa5c51255b ("drm/amd/display: Revalidate bandwidth before commiting DC updates")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Else there will be memory leak if alloc_disk() fails.
Fixes: 6a27b656fc02 ("block: virtio-blk: support multi virt queues per virtio-blk device")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since 5.7, we've been using task_work to trigger async running of
requests in the context of the original task. This generally works
great, but there's a case where if the task is currently blocked
in the kernel waiting on a condition to become true, it won't process
task_work. Even though the task is woken, it just checks whatever
condition it's waiting on, and goes back to sleep if it's still false.
This is a problem if that very condition only becomes true when that
task_work is run. An example of that is the task registering an eventfd
with io_uring, and it's now blocked waiting on an eventfd read. That
read could depend on a completion event, and that completion event
won't get trigged until task_work has been run.
Use the TWA_SIGNAL notification for task_work, so that we ensure that
the task always runs the work when queued.
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
So that the target task will exit the wait_event_interruptible-like
loop and call task_work_run() asap.
The patch turns "bool notify" into 0,TWA_RESUME,TWA_SIGNAL enum, the
new TWA_SIGNAL flag implies signal_wake_up(). However, it needs to
avoid the race with recalc_sigpending(), so the patch also adds the
new JOBCTL_TASK_WORK bit included in JOBCTL_PENDING_MASK.
TODO: once this patch is merged we need to change all current users
of task_work_add(notify = true) to use TWA_RESUME.
Cc: stable@vger.kernel.org # v5.7
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Adjust the reg property to fix the following warning seen with
'make dt_binding_check':
Documentation/devicetree/bindings/thermal/ti,am654-thermal.example.dt.yaml: example-0: thermal@42050000:reg:0: [0, 1107623936, 0, 604] is too long
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200630122527.28640-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Remove the soc unit address to fix the following warnings seen with
'make dt_binding_check':
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dts:22.20-49.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/thermal/thermal-zones.example.dts:23.20-50.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200630121804.27887-1-festevam@gmail.com
[robh: also fix thermal-zones.yaml example]
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Pass the sysreg unit name to fix the following warning seen with
'make dt_binding_check':
Warning (unit_address_vs_reg): /example-0/sysreg: node has a reg or ranges property, but no unit name
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200629215500.18037-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Remove the leading zeroes to fix the following warning seen with
'make dt_binding_check':
Documentation/devicetree/bindings/usb/aspeed,usb-vhub.example.dts:37.33-42.23: Warning (unit_address_format): /example-0/usb-vhub@1e6a0000/vhub-strings/string@0409: unit name should not have leading 0s
Reviewed-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200629214027.16768-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
There are two processed schema files:
- processed-schema-examples.yaml
Used for 'make dt_binding_check'. This is always a full schema.
- processed-schema.yaml
Used for 'make dtbs_check'. This may be a full schema, or a smaller
subset if DT_SCHEMA_FILES is given by a user.
If DT_SCHEMA_FILES is not specified, they are the same. You can copy
the former to the latter instead of running dt-mk-schema twice. This
saves the cpu time a lot when you do 'make dt_binding_check dtbs_check'
because building the full schema takes a couple of seconds.
If DT_SCHEMA_FILES is specified, processed-schema.yaml is generated
based on the specified yaml files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-4-masahiroy@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Currently, processed-schema.yaml is always built, but it is actually
used only for 'make dtbs_check'.
'make dt_binding_check' uses processed-schema-example.yaml instead.
Build processed-schema.yaml only for 'make dtbs_check'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-3-masahiroy@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
We are having more and more schema files.
Commit 8b6b80218b01 ("dt-bindings: Fix command line length limit
calling dt-mk-schema") fixed the 'Argument list too long' error of
the schema checks, but the same error happens while cleaning too.
'make clean' after 'make dt_binding_check' fails as follows:
$ make dt_binding_check
[ snip ]
$ make clean
make[2]: execvp: /bin/sh: Argument list too long
make[2]: *** [scripts/Makefile.clean:52: __clean] Error 127
make[1]: *** [scripts/Makefile.clean:66: Documentation/devicetree/bindings] Error 2
make: *** [Makefile:1763: _clean_Documentation] Error 2
'make dt_binding_check' generates so many .example.dts, .dt.yaml files,
which are passed to the 'rm' command when you run 'make clean'.
I added a small hack to use the 'find' command to clean up most of the
build artifacts before they are processed by scripts/Makefile.clean
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20200625170434.635114-2-masahiroy@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Fix unit address to match the first address specified in the reg
property of the node in example.
Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com>
Link: https://lore.kernel.org/r/20200625135158.5861-1-l4stpr0gr4m@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Since commit e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to
json-schema"), the schema for "ns16550a" is checked.
'make dt_binding_check' emits the following warning:
uart@5,00200000: $nodename:0: 'uart@5,00200000' does not match '^serial(@[0-9a-f,]+)*$'
Rename the node to follow the pattern defined in
Documentation/devicetree/bindings/serial/serial.yaml
While I was here, I removed leading zeros from unit names.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20200623113242.779241-1-yamada.masahiro@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Sync with upstream dtc primarily to pickup the I2C bus check fixes. The
interrupt_provider check is noisy, so turn it off for now.
This adds the following commits from upstream:
9d7888cbf19c dtc: Consider one-character strings as strings
8259d59f59de checks: Improve i2c reg property checking
fdabcf2980a4 checks: Remove warning for I2C_OWN_SLAVE_ADDRESS
2478b1652c8d libfdt: add extern "C" for C++
f68bfc2668b2 libfdt: trivial typo fix
7be250b4d059 libfdt: Correct condition for reordering blocks
81e0919a3e21 checks: Add interrupt provider test
85e5d839847a Makefile: when building libfdt only, do not add unneeded deps
b28464a550c5 Fix some potential unaligned accesses in dtc
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
In flush_delete_work, instead of flushing each individual pending
delayed work item, cancel and re-queue them for immediate execution.
The waiting isn't needed here because we're already waiting for all
queued work items to complete in gfs2_flush_delete_work. This makes the
code more efficient, but more importantly, it avoids sleeping during a
rhashtable walk, inside rcu_read_lock().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Log flush operations (gfs2_log_flush()) can target a specific transaction.
But if the function encounters errors (e.g. io errors) and withdraws,
the transaction was only freed it if was queued to one of the ail lists.
If the withdraw occurred before the transaction was queued to the ail1
list, function ail_drain never freed it. The result was:
BUG gfs2_trans: Objects remaining in gfs2_trans on __kmem_cache_shutdown()
This patch makes log_flush() add the targeted transaction to the ail1
list so that function ail_drain() will find and free it properly.
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Callers expect gfs2_inode_lookup to return an inode pointer or ERR_PTR(error).
Commit b66648ad6dcf caused it to return NULL instead of ERR_PTR(-ESTALE) in
some cases. Fix that.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: b66648ad6dcf ("gfs2: Move inode generation number check into gfs2_inode_lookup")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The HPD sense mechanism in Allwinner's old HDMI encoder hardware is more
or less an input-only GPIO. Other GPIO-based HPD implementations
directly return the current state, instead of polling for a specific
state and returning the other if that times out.
Remove the I/O polling from sun4i_hdmi_connector_detect() and directly
return a known state based on the current reading. This also gets rid
of excessive CPU usage by kworker as reported on Stack Exchange [1] and
Armbian forums [2].
[1] https://superuser.com/questions/1515001/debian-10-buster-on-cubietruck-with-bug-in-sun4i-drm-hdmi
[2] https://forum.armbian.com/topic/14282-headless-systems-and-sun4i_drm_hdmi-a10a20/
Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629060032.24134-1-wens@kernel.org
|
|
It's better to use /bin/sh instead of /bin/bash in order to run the tests
in the BusyBox shell.
Fixes: 6ea3dfe1e073 ("selftests: add TPM 2.0 tests")
Cc: stable@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
'test -f' is suitable only for *regular* files. Use 'test -e' instead.
Cc: Nikita Sobolev <Nikita.Sobolev@synopsys.com>
Cc: linux-integrity@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Fixes: 5627f9cffee7 ("Kernel selftests: Add check if TPM devices are supported")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The reverted commit illegitly uses tpm2-tools. External dependencies are
absolutely forbidden from these tests. There is also the problem that
clearing is not necessarily wanted behavior if the test/target computer is
not used only solely for testing.
Fixes: a9920d3bad40 ("tpm: selftest: cleanup after unseal with wrong auth/policy test")
Cc: Tadeusz Struk <tadeusz.struk@intel.com>
Cc: stable@vger.kernel.org
Cc: linux-integrity@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Make blk_ksm_destroy() use the kvfree_sensitive() function (which was
introduced in v5.8-rc1) instead of open-coding it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Even if that's only a warning, not including asm/cacheflush.h
leads to svc_flush_bvec() being empty allthough powerpc defines
ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE.
CC net/sunrpc/svcsock.o
net/sunrpc/svcsock.c:227:5: warning: "ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE" is not defined [-Wundef]
#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
^
Include linux/highmem.h so that asm/cacheflush.h will be included.
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: ca07eda33e01 ("SUNRPC: Refactor svc_recvfrom()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
I don't understand this code well, but I'm seeing a warning about a
still-referenced inode on unmount, and every other similar filesystem
does a dput() here.
Fixes: e8a79fb14f6b ("nfsd: add nfsd/clients directory")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
We don't drop the reference on the nfsdfs filesystem with
mntput(nn->nfsd_mnt) until nfsd_exit_net(), but that won't be called
until the nfsd module's unloaded, and we can't unload the module as long
as there's a reference on nfsdfs. So this prevents module unloading.
Fixes: 2c830dd7209b ("nfsd: persist nfsd filesystem across mounts")
Reported-and-Tested-by: Luo Xiaogang <lxgrxd@163.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This reverts commit e9c15badbb7b ("fs: Do not check if there is a
fsnotify watcher on pseudo inodes"). The commit intended to eliminate
fsnotify-related overhead for pseudo inodes but it is broken in
concept. inotify can receive events of pipe files under /proc/X/fd and
chromium relies on close and open events for sandboxing. Maxim Levitsky
reported the following
Chromium starts as a white rectangle, shows few white rectangles that
resemble its notifications and then crashes.
The stdout output from chromium:
[mlevitsk@starship ~]$chromium-freeworld
mesa: for the --simplifycfg-sink-common option: may only occur zero or one times!
mesa: for the --global-isel-abort option: may only occur zero or one times!
[3379:3379:0628/135151.440930:ERROR:browser_switcher_service.cc(238)] XXX Init()
../../sandbox/linux/seccomp-bpf-helpers/sigsys_handlers.cc:**CRASHING**:seccomp-bpf failure in syscall 0072
Received signal 11 SEGV_MAPERR 0000004a9048
Crashes are not universal but even if chromium does not crash, it certainly
does not work properly. While filtering just modify and access might be
safe, the benefit is not worth the risk hence the revert.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Fixes: e9c15badbb7b ("fs: Do not check if there is a fsnotify watcher on pseudo inodes")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After pulling 5.7.0 (linux-next merge), mcf5441x mmu boot was
hanging silently.
memblock_add() seems not appropriate, since using MAX_NUMNODES
as node id, while memblock_add_node() sets up memory for node id 0.
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
|
|
The m68k nommu setup code didn't register the beginning of the physical
memory with memblock because it was anyway occupied by the kernel. However,
commit fa3354e4ea39 ("mm: free_area_init: use maximal zone PFNs rather than
zone sizes") changed zones initialization to use memblock.memory to detect
the zone extents and this caused inconsistency between zone PFNs and the
actual PFNs:
BUG: Bad page state in process swapper pfn:20165
page:41fe0ca0 refcount:0 mapcount:1 mapping:00000000 index:0x0 flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000000 00000000 00000000 00000000
page dumped because: nonzero mapcount
CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc1-00001-g3a38f8a60c65-dirty #1
Stack from 404c9ebc:
404c9ebc 4029ab28 4029ab28 40088470 41fe0ca0 40299e21 40299df1 404ba2a4
00020165 00000000 41fd2c10 402c7ba0 41fd2c04 40088504 41fe0ca0 40299e21
00000000 40088a12 41fe0ca0 41fe0ca4 0000020a 00000000 00000001 402ca000
00000000 41fe0ca0 41fd2c10 41fd2c10 00000000 00000000 402b2388 00000001
400a0934 40091056 404c9f44 404c9f44 40088db4 402c7ba0 00000001 41fd2c04
41fe0ca0 41fd2000 41fe0ca0 40089e02 4026ecf4 40089e4e 41fe0ca0 ffffffff
Call Trace:
[<40088470>] 0x40088470
[<40088504>] 0x40088504
[<40088a12>] 0x40088a12
[<402ca000>] 0x402ca000
[<400a0934>] 0x400a0934
Adjust the memory registration with memblock to include the beginning of
the physical memory and make sure that the area occupied by the kernel is
marked as reserved.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
|
|
Else there may be magic numbers in /sys/kernel/debug/block/*/state.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the kernel panics, one page of kmsg data may be collected and sent to
Hyper-V to aid in diagnosing the failure. The collected kmsg data typically
contains 50 to 100 lines, each of which has a log level prefix that isn't
very useful from a diagnostic standpoint. So tell kmsg_dump_get_buffer()
to not include the log level, enabling more information that *is* useful to
fit in the page.
Requesting in stable kernels, since many kernels running in production are
stable releases.
Cc: stable@vger.kernel.org
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1593210497-114310-1-git-send-email-joseph.salisbury@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
As description for DIV_ROUND_CLOSEST in file include/linux/kernel.h.
"Result is undefined for negative divisors if the dividend variable
type is unsigned and for negative dividends if the divisor variable
type is unsigned."
In current code, the FIXPT_DIV uses DIV_ROUND_CLOSEST but has not
checked sign of divisor before using. It makes undefined temperature
value in case the value is negative.
This patch fixes to satisfy DIV_ROUND_CLOSEST description
and fix bug too. Note that the variable name "reg" is not good
because it should be the same type as rcar_gen3_thermal_read().
However, it's better to rename the "reg" in a further patch as
cleanup.
Signed-off-by: Van Do <van.do.xw@renesas.com>
Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
[shimoda: minor fixes, add Fixes tag]
Fixes: 564e73d283af ("thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Soderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Soderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1593085099-2057-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
|
|
The function cpu_power_to_freq is used to find a frequency and set the
cooling device to consume at most the power to be converted. For example,
if the power to be converted is 80mW, and the em table is as follow.
struct em_cap_state table[] = {
/* KHz mW */
{ 1008000, 36, 0 },
{ 1200000, 49, 0 },
{ 1296000, 59, 0 },
{ 1416000, 72, 0 },
{ 1512000, 86, 0 },
};
The target frequency should be 1416000KHz, not 1512000KHz.
Fixes: 349d39dc5739 ("thermal: cpu_cooling: merge frequency and power tables")
Cc: <stable@vger.kernel.org> # v4.13+
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200619090825.32747-1-finley.xiao@rock-chips.com
|
|
After merging tsens-common.c into tsens.c, we can now mark some
functions static so they don't need any prototype declarations. This
fixes the following issue reported by lkp.
>> drivers/thermal/qcom/tsens.c:385:13: warning: no previous prototype for 'tsens_critical_irq_thread' [-Wmissing-prototypes]
385 | irqreturn_t tsens_critical_irq_thread(int irq, void *data)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/thermal/qcom/tsens.c:455:13: warning: no previous prototype for 'tsens_irq_thread' [-Wmissing-prototypes]
455 | irqreturn_t tsens_irq_thread(int irq, void *data)
| ^~~~~~~~~~~~~~~~
>> drivers/thermal/qcom/tsens.c:523:5: warning: no previous prototype for 'tsens_set_trips' [-Wmissing-prototypes]
523 | int tsens_set_trips(void *_sensor, int low, int high)
| ^~~~~~~~~~~~~~~
>> drivers/thermal/qcom/tsens.c:560:5: warning: no previous prototype for 'tsens_enable_irq' [-Wmissing-prototypes]
560 | int tsens_enable_irq(struct tsens_priv *priv)
| ^~~~~~~~~~~~~~~~
>> drivers/thermal/qcom/tsens.c:573:6: warning: no previous prototype for 'tsens_disable_irq' [-Wmissing-prototypes]
573 | void tsens_disable_irq(struct tsens_priv *priv)
| ^~~~~~~~~~~~~~~~~
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/6757a26876b29922929abf64b1c11fa3b3033d03.1590579709.git.amit.kucheria@linaro.org
|
|
When call function devm_platform_ioremap_resource(), we should use IS_ERR()
to check the return value and return PTR_ERR() if failed.
Fixes: 554fdbaf19b1 ("thermal: sprd: Add Spreadtrum thermal driver support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1590371941-25430-1-git-send-email-yangtiezhu@loongson.cn
|
|
MT8183_NUM_ZONES should be set to 1
because MT8183 doesn't have multiple banks.
Fixes: a4ffe6b52d27 ("thermal: mediatek: add support for MT8183")
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200323121537.22697-6-michael.kao@mediatek.com
|
|
After finishing using cpu node got from of_get_cpu_node(), of_node_put()
needs to be called.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1585232945-23368-1-git-send-email-Anson.Huang@nxp.com
|
Bob Peterson
Jarkko Sakkinen
Douglas Anderson
David Gibson
Binbin Zhou
Vasily Averin
James Bottomley
Fabio Estevam
Alex Deucher
Nicholas Kazlauskas
Hou Tao
Jens Axboe
Oleg Nesterov
Masahiro Yamada
Kangmin Park
Masahiro Yamada
Rob Herring
Andreas Gruenbacher
Chen-Yu Tsai
Eric Biggers
Christophe Leroy
J. Bruce Fields
Mel Gorman
Angelo Dureghello
Mike Rapoport
Joseph Salisbury
Dien Pham
Finley Xiao
Amit Kucheria
Tiezhu Yang
Michael Kao
Anson Huang