| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There are intermittent failures occurred when stressing the
arch-timer test in a Qemu VM:
Guest assert failed, vcpu 0; stage; 4; iter: 3
==== Test Assertion Failure ====
aarch64/arch_timer.c:196: config_iter + 1 == irq_iter
pid=4048 tid=4049 errno=4 - Interrupted system call
1 0x000000000040253b: test_vcpu_run at arch_timer.c:248
2 0x0000ffffb60dd5c7: ?? ??:0
3 0x0000ffffb6145d1b: ?? ??:0
0x3 != 0x2 (config_iter + 1 != irq_iter)e
Further test and debug show that the timeout for an interrupt
to arrive do have random high fluctuation, espectially when
testing in an virtual environment.
To alleviate this issue, just expose the timeout value as user
configurable and print some hint message to increase the value
when hitting the failure..
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Change signed type to unsigned in test_args struct which
only make sense for unsigned value.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The introduction of $(SPLIT_TESTS) also introduced a warning when
building selftests on architectures that include get-reg-lists:
make: Entering directory '/root/kvm/tools/testing/selftests/kvm'
Makefile:272: warning: overriding recipe for target '/root/kvm/tools/testing/selftests/kvm/get-reg-list'
Makefile:267: warning: ignoring old recipe for target '/root/kvm/tools/testing/selftests/kvm/get-reg-list'
make: Leaving directory '/root/kvm/tools/testing/selftests/kvm'
In addition, the rule for $(SPLIT_TESTS_TARGETS) includes _all_
the $(SPLIT_TESTS_OBJS), which only works because there is just one.
So fix both by adjusting the rules:
- remove $(SPLIT_TESTS_TARGETS) from the $(TEST_GEN_PROGS) rules,
and rename it to $(SPLIT_TEST_GEN_PROGS)
- fix $(SPLIT_TESTS_OBJS) so that it plays well with $(OUTPUT),
rename it to $(SPLIT_TEST_GEN_OBJ), and list the object file
explicitly in the $(SPLIT_TEST_GEN_PROGS) link rule
Fixes: 17da79e009c3 ("KVM: arm64: selftests: Split get-reg-list test code", 2023-08-09)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
|
|
Missed a call in the previous fix.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
1) errors from ext4_getblk() should not be propagated to caller
unless we are really sure that we would've gotten the same error
in non-RCU pathwalk.
2) we leak buffer_heads if ext4_getblk() is successful, but bh is
not uptodate.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
->d_revalidate() bails out there, anyway. It's not enough
to prevent getting into ->get_link() in RCU mode, but that
could happen only in a very contrieved setup. Not worth
trying to do anything fancy here unless ->d_revalidate()
stops kicking out of RCU mode at least in some cases.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
->permission(), ->get_link() and ->inode_get_acl() might dereference
->s_fs_info (and, in case of ->permission(), ->s_fs_info->fc->user_ns
as well) when called from rcu pathwalk.
Freeing ->s_fs_info->fc is rcu-delayed; we need to make freeing ->s_fs_info
and dropping ->user_ns rcu-delayed too.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
makes proc_pid_ns() safe from rcu pathwalk (put_pid_ns()
is still synchronous, but that's not a problem - it does
rcu-delay everything that needs to be)
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
that keeps both around until struct inode is freed, making access
to them safe from rcu-pathwalk
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
NFS ->d_revalidate(), ->permission() and ->get_link() need to access
some parts of nfs_server when called in RCU mode:
server->flags
server->caps
*(server->io_stats)
and, worst of all, call
server->nfs_client->rpc_ops->have_delegation
(the last one - as NFS_PROTO(inode)->have_delegation()). We really
don't want to RCU-delay the entire nfs_free_server() (it would have
to be done with schedule_work() from RCU callback, since it can't
be made to run from interrupt context), but actual freeing of
nfs_server and ->io_stats can be done via call_rcu() just fine.
nfs_client part is handled simply by making nfs_free_client() use
kfree_rcu().
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
nfs_set_verifier() relies upon dentry being pinned; if that's
the case, grabbing ->d_lock stabilizes ->d_parent and guarantees
that ->d_parent points to a positive dentry. For something
we'd run into in RCU mode that is *not* true - dentry might've
been through dentry_kill() just as we grabbed ->d_lock, with
its parent going through the same just as we get to into
nfs_set_verifier_locked(). It might get to detaching inode
(and zeroing ->d_inode) before nfs_set_verifier_locked() gets
to fetching that; we get an oops as the result.
That can happen in nfs{,4} ->d_revalidate(); the call chain in
question is nfs_set_verifier_locked() <- nfs_set_verifier() <-
nfs_lookup_revalidate_delegated() <- nfs{,4}_do_lookup_revalidate().
We have checked that the parent had been positive, but that's
done before we get to nfs_set_verifier() and it's possible for
memory pressure to pick our dentry as eviction candidate by that
time. If that happens, back-to-back attempts to kill dentry and
its parent are quite normal. Sure, in case of eviction we'll
fail the ->d_seq check in the caller, but we need to survive
until we return there...
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
In __afs_break_callback() we might check ->cb_nr_mmap and if it's non-zero
do queue_work(&vnode->cb_work). In afs_drop_open_mmap() we decrement
->cb_nr_mmap and do flush_work(&vnode->cb_work) if it reaches zero.
The trouble is, there's nothing to prevent __afs_break_callback() from
seeing ->cb_nr_mmap before the decrement and do queue_work() after both
the decrement and flush_work(). If that happens, we might be in trouble -
vnode might get freed before the queued work runs.
__afs_break_callback() is always done under ->cb_lock, so let's make
sure that ->cb_nr_mmap can change from non-zero to zero while holding
->cb_lock (the spinlock component of it - it's a seqlock and we don't
need to mess with the counter).
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
->d_hash() and ->d_compare() use those, so we need to delay freeing
them.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
That stuff can be accessed by ->d_hash()/->d_compare(); as it is, we have
a hard-to-hit UAF if rcu pathwalk manages to get into ->d_hash() on a filesystem
that is in process of getting shut down.
Besides, having nls and upcase table cleanup moved from ->put_super() towards
the place where sbi is freed makes for simpler failure exits.
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
one of the flags in it is used by ->d_hash()/->d_compare()
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
If lazy call of ->permission() returns a hard error, check that
try_to_unlazy() succeeds before returning it. That both makes
life easier for ->permission() instances and closes the race
in ENOTDIR handling - it is possible that positive d_can_lookup()
seen in link_path_walk() applies to the state *after* unlink() +
mkdir(), while nd->inode matches the state prior to that.
Normally seeing e.g. EACCES from permission check in rcu pathwalk
means that with some timings non-rcu pathwalk would've run into
the same; however, running into a non-executable regular file
in the middle of a pathname would not get to permission check -
it would fail with ENOTDIR instead.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Avoids fun races in RCU pathwalk... Same goes for freeing LSM shite
hanging off super_block's arse.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
check_snapshot() copies the bch_snapshot to a temporary to easily handle
older versions that don't have all the fields of the current version,
but it lacked a min() to correctly handle keys newer and larger than the
current version.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If a journal write errored, the list of devices it was written to could
be empty - we're not supposed to mark an empty replicas list.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_direct_IO_read() checks the request offset and size for sector
alignment and then falls through to a couple calculations to shrink
the size of the request based on the inode size. The problem is that
these checks round up to the fs block size, which runs the risk of
underflowing iter->count if the block size happens to be large
enough. This is triggered by fstest generic/361 with a 4k block
size, which subsequently leads to a crash. To avoid this crash,
check that the shorten length doesn't exceed the overall length of
the iter.
Fixes:
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Su Yue <glass.su@suse.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If we're in FILTER_SNAPSHOTS mode and we start scanning a range of the
keyspace where no keys are visible in the current snapshot, we have a
problem - we'll scan for a very long time before scanning terminates.
Awhile back, this was fixed for most cases with peek_upto() (and
assertions that enforce that it's being used).
But the fix missed the fact that the inodes btree is different - every
key offset is in a different snapshot tree, not just the inode field.
Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Recently, we fixed our __GFP_NOFAIL usage in the readahead path, but the
easy one in read_single_folio() (where wa can return an error) was
missed - oops.
Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The newly added integrity_recheck() function has another larger stack
allocation, just like its caller integrity_metadata(). When it gets
inlined, the combination of the two exceeds the warning limit for 32-bit
architectures and possibly risks an overflow when this is called from
a deep call chain through a file system:
drivers/md/dm-integrity.c:1767:13: error: stack frame size (1048) exceeds limit (1024) in 'integrity_metadata' [-Werror,-Wframe-larger-than]
1767 | static void integrity_metadata(struct work_struct *w)
Since the caller at this point is done using its checksum buffer,
just reuse the same buffer in the new function to avoid the double
allocation.
[Mikulas: add "noinline" to integrity_recheck and verity_recheck.
These functions are only called on error, so they shouldn't bloat the
stack frame or code size of the caller.]
Fixes: c88f5e553fe3 ("dm-integrity: recheck the integrity tag after a failure")
Fixes: 9177f3c0dea6 ("dm-verity: recheck the hash after a failure")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
When being a target, NAK from the controller means that all bytes have
been transferred. So, the last byte needs also to be marked as
'processed'. Otherwise index registers of backends may not increase.
Fixes: f7414cd6923f ("i2c: imx: support slave mode for imx I2C driver")
Signed-off-by: Corey Minyard <minyard@acm.org>
Tested-by: Andrew Manley <andrew.manley@sealingtech.com>
Reviewed-by: Andrew Manley <andrew.manley@sealingtech.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
[wsa: fixed comment and commit message to properly describe the case]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Prior to commit 092edaddb660 ("iommu: Support mm PASID 1:n with sva
domains") the code allowed a SVA handle to be bound multiple times to the
same (mm, device) pair. This was alluded to in the kdoc comment, but we
had understood this to be more a remark about allowing multiple devices,
not a literal same-driver re-opening the same SVA.
It turns out uacce and idxd were both relying on the core code to handle
reference counting for same-device same-mm scenarios. As this looks hard
to resolve in the drivers bring it back to the core code.
The new design has changed the meaning of the domain->users refcount to
refer to the number of devices that are sharing that domain for the same
mm. This is part of the design to lift the SVA domain de-duplication out
of the drivers.
Return the old behavior by explicitly de-duplicating the struct iommu_sva
handle. The same (mm, device) will return the same handle pointer and the
core code will handle tracking this. The last unbind of the handle will
destroy it.
Fixes: 092edaddb660 ("iommu: Support mm PASID 1:n with sva domains")
Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Closes: https://lore.kernel.org/all/20240221110658.529-1-zhangfei.gao@linaro.org/
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/0-v1-9455fc497a6f+3b4-iommu_sva_sharing_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
All the checks currently done in kvm_check_cpucfg can be realized with
early returns, so just do that to avoid extra cognitive burden related
to the return value handling.
While at it, clean up comments of _kvm_get_cpucfg_mask() and
kvm_check_cpucfg(), by removing comments that are merely restatement of
the code nearby, and paraphrasing the rest so they read more natural for
English speakers (that likely are not familiar with the actual Chinese-
influenced grammar).
No functional changes intended.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The function is not actually a getter of guest CPUCFG, but rather
validation of the input CPUCFG ID plus information about the supported
bit flags of that CPUCFG leaf. So rename it to avoid confusion.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The range check for the CPUCFG ID is wrong (should have been a ||
instead of &&) and useless in effect, so fix the obvious mistake.
Furthermore, the juggling of the temp return value is unnecessary,
because it is semantically equivalent and more readable to just
return at every switch case's end. This is done too to avoid potential
bugs in the future related to the unwanted complexity.
Also, the return value of _kvm_get_cpucfg is meant to be checked, but
this was not done, so bad CPUCFG IDs wrongly fall back to the default
case and 0 is incorrectly returned; check the return value to fix the
UAPI behavior.
While at it, also remove the redundant range check in kvm_check_cpucfg,
because out-of-range CPUCFG IDs are already rejected by the -EINVAL
as returned by _kvm_get_cpucfg().
Fixes: db1ecca22edf ("LoongArch: KVM: Add LSX (128bit SIMD) support")
Fixes: 118e10cd893d ("LoongArch: KVM: Add LASX (256bit SIMD) support")
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The DTS code coding style expects exactly one space before '{'
character.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The unflatten_and_copy_device_tree() function contains a call to
memblock_alloc(). This means that memblock is allocating memory before
any of the reserved memory regions are set aside in the arch_mem_init()
function which calls early_init_fdt_scan_reserved_mem(). Therefore,
there is a possibility for memblock to allocate from any of the
reserved memory regions.
Hence, move the call to early_init_fdt_scan_reserved_mem() to be earlier
in the init sequence, so that the reserved memory regions are set aside
before any allocations are done using memblock.
Cc: stable@vger.kernel.org
Fixes: 88d4d957edc707e ("LoongArch: Add FDT booting support from efi system table")
Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Update cpu_sibling_map when disabling nonboot CPUs by defining & calling
clear_cpu_sibling_map(), otherwise we get such errors on SMT systems:
jump label: negative count!
WARNING: CPU: 6 PID: 45 at kernel/jump_label.c:263 __static_key_slow_dec_cpuslocked+0xec/0x100
CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340
pc 90000000004c302c ra 90000000004c302c tp 90000001005bc000 sp 90000001005bfd20
a0 000000000000001b a1 900000000224c278 a2 90000001005bfb58 a3 900000000224c280
a4 900000000224c278 a5 90000001005bfb50 a6 0000000000000001 a7 0000000000000001
t0 ce87a4763eb5234a t1 ce87a4763eb5234a t2 0000000000000000 t3 0000000000000000
t4 0000000000000006 t5 0000000000000000 t6 0000000000000064 t7 0000000000001964
t8 000000000009ebf6 u0 9000000001f2a068 s9 0000000000000000 s0 900000000246a2d8
s1 ffffffffffffffff s2 ffffffffffffffff s3 90000000021518c0 s4 0000000000000040
s5 9000000002151058 s6 9000000009828e40 s7 00000000000000b4 s8 0000000000000006
ra: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100
ERA: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0)
PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV)
CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340
Stack : 0000000000000000 900000000203f258 900000000179afc8 90000001005bc000
90000001005bf980 0000000000000000 90000001005bf988 9000000001fe0be0
900000000224c280 900000000224c278 90000001005bf8c0 0000000000000001
0000000000000001 ce87a4763eb5234a 0000000007f38000 90000001003f8cc0
0000000000000000 0000000000000006 0000000000000000 4c206e6f73676e6f
6f4c203a656d616e 000000000009ec99 0000000007f38000 0000000000000000
900000000214b000 9000000001fe0be0 0000000000000004 0000000000000000
0000000000000107 0000000000000009 ffffffffffafdabe 00000000000000b4
0000000000000006 90000000004c302c 9000000000224528 00005555939a0c7c
00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
...
Call Trace:
[<9000000000224528>] show_stack+0x48/0x1a0
[<900000000179afc8>] dump_stack_lvl+0x78/0xa0
[<9000000000263ed0>] __warn+0x90/0x1a0
[<90000000017419b8>] report_bug+0x1b8/0x280
[<900000000179c564>] do_bp+0x264/0x420
[<90000000004c302c>] __static_key_slow_dec_cpuslocked+0xec/0x100
[<90000000002b4d7c>] sched_cpu_deactivate+0x2fc/0x300
[<9000000000266498>] cpuhp_invoke_callback+0x178/0x8a0
[<9000000000267f70>] cpuhp_thread_fun+0xf0/0x240
[<90000000002a117c>] smpboot_thread_fn+0x1dc/0x2e0
[<900000000029a720>] kthread+0x140/0x160
[<9000000000222288>] ret_from_kernel_thread+0xc/0xa4
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Disable IRQ before init_fn() for nonboot CPUs when hotplug, in order to
silence such warnings (and also avoid potential errors due to unexpected
interrupts):
WARNING: CPU: 1 PID: 0 at kernel/rcu/tree.c:4503 rcu_cpu_starting+0x214/0x280
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198
pc 90000000048e3334 ra 90000000047bd56c tp 900000010039c000 sp 900000010039fdd0
a0 0000000000000001 a1 0000000000000006 a2 900000000802c040 a3 0000000000000000
a4 0000000000000001 a5 0000000000000004 a6 0000000000000000 a7 90000000048e3f4c
t0 0000000000000001 t1 9000000005c70968 t2 0000000004000000 t3 000000000005e56e
t4 00000000000002e4 t5 0000000000001000 t6 ffffffff80000000 t7 0000000000040000
t8 9000000007931638 u0 0000000000000006 s9 0000000000000004 s0 0000000000000001
s1 9000000006356ac0 s2 9000000007244000 s3 0000000000000001 s4 0000000000000001
s5 900000000636f000 s6 7fffffffffffffff s7 9000000002123940 s8 9000000001ca55f8
ra: 90000000047bd56c tlb_init+0x24c/0x528
ERA: 90000000048e3334 rcu_cpu_starting+0x214/0x280
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000000 (PPLV0 -PIE -PWE)
EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
ECFG: 00071000 (LIE=12 VS=7)
ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0)
PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198
Stack : 0000000000000000 9000000006375000 9000000005b61878 900000010039c000
900000010039fa30 0000000000000000 900000010039fa38 900000000619a140
9000000006456888 9000000006456880 900000010039f950 0000000000000001
0000000000000001 cb0cb028ec7e52e1 0000000002b90000 9000000100348700
0000000000000000 0000000000000001 ffffffff916d12f1 0000000000000003
0000000000040000 9000000007930370 0000000002b90000 0000000000000004
9000000006366000 900000000619a140 0000000000000000 0000000000000004
0000000000000000 0000000000000009 ffffffffffc681f2 9000000002123940
9000000001ca55f8 9000000006366000 90000000047a4828 00007ffff057ded8
00000000000000b0 0000000000000000 0000000000000000 0000000000071000
...
Call Trace:
[<90000000047a4828>] show_stack+0x48/0x1a0
[<9000000005b61874>] dump_stack_lvl+0x84/0xcc
[<90000000047f60ac>] __warn+0x8c/0x1e0
[<9000000005b0ab34>] report_bug+0x1b4/0x280
[<9000000005b63110>] do_bp+0x2d0/0x480
[<90000000047a2e20>] handle_bp+0x120/0x1c0
[<90000000048e3334>] rcu_cpu_starting+0x214/0x280
[<90000000047bd568>] tlb_init+0x248/0x528
[<90000000047a4c44>] per_cpu_trap_init+0x124/0x160
[<90000000047a19f4>] cpu_probe+0x494/0xa00
[<90000000047b551c>] start_secondary+0x3c/0xc0
[<9000000005b66134>] smpboot_entry+0x50/0x58
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This reports the currently used vram allocations.
userspace using this has been proposed for nvk, but
it's a rather trivial uapi addition.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This returns the BAR resources size so userspace can make
decisions based on rebar support.
userspace using this has been proposed for nvk, but
it's a rather trivial uapi addition.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Turing and Ampere will continue to use the old paths by default,
but we should allow distros to decide what the policy is.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240214040632.661069-1-airlied@gmail.com
|
|
Don't set power state flag when system enter runtime suspend,
or it may cause runtime resume failure issue.
Fixes: 3a9626c816db ("drm/amd: Stop evicting resources on APUs in suspend")
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Use i2c adapter when there isn't aux_mode in dc_link to fix a
null-pointer derefence that happens when running
igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector
detected as below:
[ +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0
[ +0.000010] #PF: supervisor read access in kernel mode
[ +0.000005] #PF: error_code(0x0000) - not-present page
[ +0.000004] PGD 0 P4D 0
[ +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152
[ +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021
[ +0.000004] RIP: 0010:i2c_transfer+0xd/0x100
[ +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16
[ +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246
[ +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080
[ +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0
[ +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980
[ +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080
[ +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f
[ +0.000004] FS: 00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000
[ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0
[ +0.000003] PKRU: 55555554
[ +0.000003] Call Trace:
[ +0.000006] <TASK>
[ +0.000006] ? __die+0x23/0x70
[ +0.000011] ? page_fault_oops+0x17d/0x4c0
[ +0.000008] ? preempt_count_add+0x6e/0xa0
[ +0.000008] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000011] ? exc_page_fault+0x7f/0x180
[ +0.000009] ? asm_exc_page_fault+0x26/0x30
[ +0.000013] ? i2c_transfer+0xd/0x100
[ +0.000010] drm_do_probe_ddc_edid+0xc2/0x140 [drm]
[ +0.000067] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000006] ? _drm_do_get_edid+0x97/0x3c0 [drm]
[ +0.000043] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm]
[ +0.000042] edid_block_read+0x3b/0xd0 [drm]
[ +0.000043] _drm_do_get_edid+0xb6/0x3c0 [drm]
[ +0.000041] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm]
[ +0.000043] drm_edid_read_custom+0x37/0xd0 [drm]
[ +0.000044] amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu]
[ +0.000153] drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper]
[ +0.000000] __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper]
[ +0.000000] ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu]
[ +0.000000] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000000] drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper]
[ +0.000000] status_store+0xb2/0x1f0 [drm]
[ +0.000000] kernfs_fop_write_iter+0x136/0x1d0
[ +0.000000] vfs_write+0x24d/0x440
[ +0.000000] ksys_write+0x6f/0xf0
[ +0.000000] do_syscall_64+0x60/0xc0
[ +0.000000] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000000] ? syscall_exit_to_user_mode+0x2b/0x40
[ +0.000000] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000000] ? do_syscall_64+0x6c/0xc0
[ +0.000000] ? do_syscall_64+0x6c/0xc0
[ +0.000000] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ +0.000000] RIP: 0033:0x7f9ad46b4b00
[ +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89
[ +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[ +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00
[ +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009
[ +0.000000] RBP: 0000000000000002 R08: 0000000000000064 R09: 0000000000000000
[ +0.000000] R10: 0000000000000000 R11: 0000000000000202 R12: 00007f9ad48a7417
[ +0.000000] R13: 0000000000000009 R14: 00007ffcbd3bd760 R15: 0000000000000001
[ +0.000000] </TASK>
[ +0.000000] Modules linked in: ctr ccm rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash algif_skcipher af_alg bnep btusb btrtl btbcm btintel btmtk bluetooth uvcvideo videobuf2_vmalloc sha3_generic videobuf2_memops uvc jitterentropy_rng videobuf2_v4l2 videodev drbg videobuf2_common ansi_cprng mc ecdh_generic ecc qrtr binfmt_misc hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio snd_ctl_led joydev hid_sensor_iio_common rtw89_8852ae rtw89_8852a rtw89_pci snd_hda_codec_realtek rtw89_core snd_hda_codec_generic intel_rapl_msr ledtrig_audio intel_rapl_common snd_hda_codec_hdmi mac80211 snd_hda_intel snd_intel_dspcfg kvm_amd snd_hda_codec snd_soc_dmic snd_acp3x_rn snd_acp3x_pdm_dma libarc4 snd_hwdep snd_soc_core kvm snd_hda_core cfg80211 snd_pci_acp6x snd_pcm nls_ascii snd_timer hp_wmi snd_pci_acp5x nls_cp437 snd_rn_pci_acp3x ucsi_acpi sparse_keymap ccp snd platform_profile snd_acp_config typec_ucsi irqbypass vfat sp5100_tco
[ +0.000000] snd_soc_acpi fat rapl pcspkr wmi_bmof roles rfkill rng_core snd_pci_acp3x soundcore k10temp watchdog typec battery ac amd_pmc acpi_tad button hid_sensor_hub hid_multitouch evdev serio_raw msr parport_pc ppdev lp parport fuse loop efi_pstore configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic dm_crypt dm_mod efivarfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c crc32c_generic xor raid6_pq raid1 raid0 multipath linear md_mod amdgpu amdxcp i2c_algo_bit drm_ttm_helper ttm crc32_pclmul crc32c_intel drm_exec gpu_sched drm_suballoc_helper nvme ghash_clmulni_intel drm_buddy drm_display_helper sha512_ssse3 nvme_core ahci xhci_pci sha512_generic hid_generic xhci_hcd libahci rtsx_pci_sdmmc t10_pi i2c_hid_acpi drm_kms_helper i2c_hid mmc_core libata aesni_intel crc64_rocksoft_generic crypto_simd amd_sfh crc64_rocksoft scsi_mod usbcore cryptd crc_t10dif cec drm crct10dif_generic hid rtsx_pci crct10dif_pclmul scsi_common rc_core crc64 i2c_piix4
[ +0.000000] usb_common crct10dif_common video wmi
[ +0.000000] CR2: 00000000000004c0
[ +0.000000] ---[ end trace 0000000000000000 ]---
Fixes: 0e859faf8670 ("drm/amd/display: Remove unwanted drm edid references")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
After destroying dmub_srv, the memory associated with it is
not freed, causing a memory leak:
unreferenced object 0xffff896302b45800 (size 1024):
comm "(udev-worker)", pid 222, jiffies 4294894636
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 6265fd77):
[<ffffffff993495ed>] kmalloc_trace+0x29d/0x340
[<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu]
[<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu]
[<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu]
[<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu]
[<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu]
[<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90
[<ffffffff996918a3>] pci_device_probe+0xc3/0x230
[<ffffffff99805872>] really_probe+0xe2/0x480
[<ffffffff99805c98>] __driver_probe_device+0x78/0x160
[<ffffffff99805daf>] driver_probe_device+0x1f/0x90
[<ffffffff9980601e>] __driver_attach+0xce/0x1c0
[<ffffffff99803170>] bus_for_each_dev+0x70/0xc0
[<ffffffff99804822>] bus_add_driver+0x112/0x210
[<ffffffff99807245>] driver_register+0x55/0x100
[<ffffffff990012d1>] do_one_initcall+0x41/0x300
Fix this by freeing dmub_srv after destroying it.
Fixes: 743b9786b14a ("drm/amd/display: Hook up the DMUB service in DM")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Currently there is an error while translating input clock sates into
output clock states. The highest fclk setting from output sates is
being dropped because of this error.
[How]
For dcn35 and dcn351, make output_states equal to input states.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes potential null pointer dereference warnings in the
dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up()
functions.
In both functions, the 'dc_dmub_srv' variable was being dereferenced
before it was checked for null. This could lead to a null pointer
dereference if 'dc_dmub_srv' is null. The fix is to check if
'dc_dmub_srv' is null before dereferencing it.
Thus moving the null checks for 'dc_dmub_srv' to the beginning of the
functions to ensure that 'dc_dmub_srv' is not null when it is
dereferenced.
Found by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128)
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164)
Fixes: 028bac583449 ("drm/amd/display: decouple dmcub execution to reduce lock granularity")
Fixes: 65138eb72e1f ("drm/amd/display: Add DCN35 DMUB")
Cc: JinZe.Xu <jinze.xu@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Josip Pavic <josip.pavic@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The old asic only have 1 pwrseq hw.
We don't need to map the diginst to pwrseq inst in old asic.
[How]
1. Only mapping dig to pwrseq for new asic.
2. Move mapping function into dcn specific panel control component
Cc: Stable <stable@vger.kernel.org> # v6.6+
Cc: Mario Limonciello <mario.limonciello@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3122
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work"
when boot up with a mst tbt4 dock connected. After analyzing, there are few
parts needed to be adjusted:
1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox
hpd_irq handler get registered which causes the error message.
2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not
aligned with legacy interface sequence
[How]
Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler
registration into register_hpd_handlers() to align other interfaces and
get hpd_rx_offload_wq[].aconnector initialized earlier than that.
Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that
while calling dc_link_detect(). USB4 connection status will be proactively
detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device()
Cc: Stable <stable@vger.kernel.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The s390 common I/O layer (CIO) returns an unexpected -EBUSY return code
when drivers try to start I/O while a path-verification (PV) process is
pending. This can lead to failed device initialization attempts with
symptoms like broken network connectivity after boot.
Fix this by replacing the -EBUSY return code with a deferred condition
code 1 reply to make path-verification handling consistent from a
driver's point of view.
The problem can be reproduced semi-regularly using the following process,
while repeating steps 2-3 as necessary (example assumes an OSA device
with bus-IDs 0.0.a000-0.0.a002 on CHPID 0.02):
1. echo 0.0.a000,0.0.a001,0.0.a002 >/sys/bus/ccwgroup/drivers/qeth/group
2. echo 0 > /sys/bus/ccwgroup/devices/0.0.a000/online
3. echo 1 > /sys/bus/ccwgroup/devices/0.0.a000/online ; \
echo on > /sys/devices/css0/chp0.02/status
Background information:
The common I/O layer starts path-verification I/Os when it receives
indications about changes in a device path's availability. This occurs
for example when hardware events indicate a change in channel-path
status, or when a manual operation such as a CHPID vary or configure
operation is performed.
If a driver attempts to start I/O while a PV is running, CIO reports a
successful I/O start (ccw_device_start() return code 0). Then, after
completion of PV, CIO synthesizes an interrupt response that indicates
an asynchronous status condition that prevented the start of the I/O
(deferred condition code 1).
If a PV indication arrives while a device is busy with driver-owned I/O,
PV is delayed until after I/O completion was reported to the driver's
interrupt handler. To ensure that PV can be started eventually, CIO
reports a device busy condition (ccw_device_start() return code -EBUSY)
if a driver tries to start another I/O while PV is pending.
In some cases this -EBUSY return code causes device drivers to consider
a device not operational, resulting in failed device initialization.
Note: The code that introduced the problem was added in 2003. Symptoms
started appearing with the following CIO commit that causes a PV
indication when a device is removed from the cio_ignore list after the
associated parent subchannel device was probed, but before online
processing of the CCW device has started:
2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
During boot, the cio_ignore list is modified by the cio_ignore dracut
module [1] as well as Linux vendor-specific systemd service scripts[2].
When combined, this commit and boot scripts cause a frequent occurrence
of the problem during boot.
[1] https://github.com/dracutdevs/dracut/tree/master/modules.d/81cio_ignore
[2] https://github.com/SUSE/s390-tools/blob/master/cio_ignore.service
Cc: stable@vger.kernel.org # v5.15+
Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Tested-By: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The config fragment doesn't follow the correct format to enable those
config options which make the config options getting missed while
merging with other configs.
➜ merge_config.sh -m .config tools/testing/selftests/iommu/config
Using .config as base
Merging tools/testing/selftests/iommu/config
➜ make olddefconfig
.config:5295:warning: unexpected data: CONFIG_IOMMUFD
.config:5296:warning: unexpected data: CONFIG_IOMMUFD_TEST
While at it, add CONFIG_FAULT_INJECTION as well which is needed for
CONFIG_IOMMUFD_TEST. If CONFIG_FAULT_INJECTION isn't present in base
config (such as x86 defconfig), CONFIG_IOMMUFD_TEST doesn't get enabled.
Fixes: 57f0988706fe ("iommufd: Add a selftest")
Link: https://lore.kernel.org/r/20240222074934.71380-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
During syncobj_eventfd_entry_func, dma_fence_chain_find_seqno may set
the fence to NULL if the given seqno is signaled and a later seqno has
already been submitted. In that case, the eventfd should be signaled
immediately which currently does not happen.
This is a similar issue to the one addressed by commit b19926d4f3a6
("drm/syncobj: Deal with signalled fences in drm_syncobj_find_fence.").
As a fix, if the return value of dma_fence_chain_find_seqno indicates
success but it sets the fence to NULL, we will assign a stub fence to
ensure the following code still signals the eventfd.
v1 -> v2: assign a stub fence instead of signaling the eventfd
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Fixes: c7a472297169 ("drm/syncobj: add IOCTL to register an eventfd")
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221184527.37667-1-ekurzinger@nvidia.com
|
|
If the SMMU is configured to use a two level CD table then
arm_smmu_write_ctx_desc() allocates a CD table leaf internally using
GFP_KERNEL. Due to recent changes this is being done under a spinlock to
iterate over the device list - thus it will trigger a sleeping while
atomic warning:
arm_smmu_sva_set_dev_pasid()
mutex_lock(&sva_lock);
__arm_smmu_sva_bind()
arm_smmu_mmu_notifier_get()
spin_lock_irqsave()
arm_smmu_write_ctx_desc()
arm_smmu_get_cd_ptr()
arm_smmu_alloc_cd_leaf_table()
dmam_alloc_coherent(GFP_KERNEL)
This is a 64K high order allocation and really should not be done
atomically.
At the moment the rework of the SVA to follow the new API is half
finished. Recently the CD table memory was moved from the domain to the
master, however we have the confusing situation where the SVA code is
wrongly using the RID domains device's list to track which CD tables the
SVA is installed in.
Remove the logic to replicate the CD across all the domain's masters
during attach. We know which master and which CD table the PASID should be
installed in.
Right now SVA only works when dma-iommu.c is in control of the RID
translation, which means we have a single iommu_domain shared across the
entire group and that iommu_domain is not shared outside the group.
Critically this means that the iommu_group->devices list and RID's
smmu_domain->devices list describe the same set of masters.
For PCI cases the core code also insists on singleton groups so there is
only one entry in the smmu_domain->devices list that is equal to the
master being passed in to arm_smmu_sva_set_dev_pasid().
Only non-PCI cases may have multi-device groups. However, the core code
will repeat the calls to arm_smmu_sva_set_dev_pasid() across the entire
iommu_group->devices list.
Instead of having arm_smmu_mmu_notifier_get() indirectly loop over all the
devices in the group via the RID's smmu_domain, rely on
__arm_smmu_sva_bind() to be called for each device in the group and
install the repeated CD entry that way.
This avoids taking the spinlock to access the devices list and permits the
arm_smmu_write_ctx_desc() to use a sleeping allocation. Leave the
arm_smmu_mm_release() as a confusing situation, this requires tracking
attached masters inside the SVA domain.
Removing the loop allows arm_smmu_write_ctx_desc() to be called outside
the spinlock and thus is safe to use GFP_KERNEL.
Move the clearing of the CD into arm_smmu_sva_remove_dev_pasid() so that
arm_smmu_mmu_notifier_get/put() remain paired functions.
Fixes: 24503148c545 ("iommu/arm-smmu-v3: Refactor write_ctx_desc")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/4e25d161-0cf8-4050-9aa3-dfa21cd63e56@moroto.mountain/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Link: https://lore.kernel.org/r/0-v3-11978fc67151+112-smmu_cd_atomic_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When waiting for a syncobj timeline point whose fence has not yet been
submitted with the WAIT_FOR_SUBMIT flag, a callback is registered using
drm_syncobj_fence_add_wait and the thread is put to sleep until the
timeout expires. If the fence is submitted before then,
drm_syncobj_add_point will wake up the sleeping thread immediately which
will proceed to wait for the fence to be signaled.
However, if the WAIT_AVAILABLE flag is used instead,
drm_syncobj_fence_add_wait won't get called, meaning the waiting thread
will always sleep for the full timeout duration, even if the fence gets
submitted earlier. If it turns out that the fence *has* been submitted
by the time it eventually wakes up, it will still indicate to userspace
that the wait completed successfully (it won't return -ETIME), but it
will have taken much longer than it should have.
To fix this, we must call drm_syncobj_fence_add_wait if *either* the
WAIT_FOR_SUBMIT flag or the WAIT_AVAILABLE flag is set. The only
difference being that with WAIT_FOR_SUBMIT we will also wait for the
fence to be signaled after it has been submitted while with
WAIT_AVAILABLE we will return immediately.
IGT test patch: https://lists.freedesktop.org/archives/igt-dev/2024-January/067537.html
v1 -> v2: adjust lockdep_assert_none_held_once condition
(cherry picked from commit 8c44ea81634a4a337df70a32621a5f3791be23df)
Fixes: 01d6c3578379 ("drm/syncobj: add support for timeline point wait v8")
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20240119163208.3723457-1-ekurzinger@nvidia.com
|
|
If caching mode change fails due to, for example, OOM we
free the allocated pages in a two-step process. First the pages
for which the caching change has already succeeded. Secondly
the pages for which a caching change did not succeed.
However the second step was incorrectly freeing the pages already
freed in the first step.
Fix.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 379989e7cbdc ("drm/ttm/pool: Fix ttm_pool_alloc error path")
Cc: Christian König <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.4+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221073324.3303-1-thomas.hellstrom@linux.intel.com
|
Haibo Xu
Paolo Bonzini
Linus Torvalds
Kent Overstreet
Al Viro
Brian Foster
Arnd Bergmann
Corey Minyard
Jason Gunthorpe
WANG Xuerui
Krzysztof Kozlowski
Huacai Chen
Dave Airlie
Ma Jun
Melissa Wen
Armin Wolf
Swapnil Patel
Srinivasan Shanmugam
Lewis Huang
Wayne Lin
Peter Oberparleiter
Muhammad Usama Anjum
Erik Kurzinger
Thomas Hellström