| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Without CONFIG_DRM_XE_GPUSVM set, GPU SVM is not initialized thus below
warning pops. Refine the flush work code to be controlled by the config
to avoid below warning:
"
[ 453.132028] ------------[ cut here ]------------
[ 453.132527] WARNING: CPU: 9 PID: 4491 at kernel/workqueue.c:4205 __flush_work+0x379/0x3a0
[ 453.133355] Modules linked in: xe drm_ttm_helper ttm gpu_sched drm_buddy drm_suballoc_helper drm_gpuvm drm_exec
[ 453.134352] CPU: 9 UID: 0 PID: 4491 Comm: xe_exec_mix_mod Tainted: G U W 6.15.0-rc3+ #7 PREEMPT(full)
[ 453.135405] Tainted: [U]=USER, [W]=WARN
...
[ 453.136921] RIP: 0010:__flush_work+0x379/0x3a0
[ 453.137417] Code: 8b 45 00 48 8b 55 08 89 c7 48 c1 e8 04 83 e7 08 83 e0 0f 83 cf 02 89 c6 48 0f ba 6d 00 03 e9 d5 fe ff ff 0f 0b e9 db fd ff ff <0f> 0b 45 31 e4 e9 d1 fd ff ff 0f 0b e9 03 ff ff ff 0f 0b e9 d6 fe
[ 453.139250] RSP: 0018:ffffc90000c67b18 EFLAGS: 00010246
[ 453.139782] RAX: 0000000000000000 RBX: ffff888108a24000 RCX: 0000000000002000
[ 453.140521] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8881016d61c8
[ 453.141253] RBP: ffff8881016d61c8 R08: 0000000000000000 R09: 0000000000000000
[ 453.141985] R10: 0000000000000000 R11: 0000000008a24000 R12: 0000000000000001
[ 453.142709] R13: 0000000000000002 R14: 0000000000000000 R15: ffff888107db8c00
[ 453.143450] FS: 00007f44853d4c80(0000) GS:ffff8882f469b000(0000) knlGS:0000000000000000
[ 453.144276] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 453.144853] CR2: 00007f4487629228 CR3: 00000001016aa000 CR4: 00000000000406f0
[ 453.145594] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 453.146320] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 453.147061] Call Trace:
[ 453.147336] <TASK>
[ 453.147579] ? tick_nohz_tick_stopped+0xd/0x30
[ 453.148067] ? xas_load+0x9/0xb0
[ 453.148435] ? xa_load+0x6f/0xb0
[ 453.148781] __xe_vm_bind_ioctl+0xbd5/0x1500 [xe]
[ 453.149338] ? dev_printk_emit+0x48/0x70
[ 453.149762] ? _dev_printk+0x57/0x80
[ 453.150148] ? drm_ioctl+0x17c/0x440
[ 453.150544] ? __drm_dev_vprintk+0x36/0x90
[ 453.150983] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[ 453.151575] ? drm_ioctl_kernel+0x9f/0xf0
[ 453.151998] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[ 453.152560] drm_ioctl_kernel+0x9f/0xf0
[ 453.152968] drm_ioctl+0x20f/0x440
[ 453.153332] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[ 453.153893] ? ioctl_has_perm.constprop.0.isra.0+0xae/0x100
[ 453.154489] ? memory_bm_test_bit+0x5/0x60
[ 453.154935] xe_drm_ioctl+0x47/0x70 [xe]
[ 453.155419] __x64_sys_ioctl+0x8d/0xc0
[ 453.155824] do_syscall_64+0x47/0x110
[ 453.156228] entry_SYSCALL_64_after_hwframe+0x76/0x7e
"
v2 (Matt):
refine commit message to have more details
add Fixes tag
move the code to xe_svm.h which already have the config
remove a blank line per codestyle suggestion
Fixes: 63f6e480d115 ("drm/xe: Add SVM garbage collector")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250502170052.1787973-1-shuicheng.lin@intel.com
(cherry picked from commit 9d80698bcd97a5ad1088bcbb055e73fd068895e2)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
xe_force_wake_get() is dependent on xe_pm_runtime_get(), so for
the release path, xe_force_wake_put() should be called first then
xe_pm_runtime_put().
Combine the error path and normal path together with goto.
Fixes: 85d547608ef5 ("drm/xe/xe_gt_debugfs: Update handling of xe_force_wake_get return")
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20250507022302.2187527-1-shuicheng.lin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 432cd94efdca06296cc5e76d673546f58aa90ee1)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The workqueue used for the reset worker is marked as WQ_MEM_RECLAIM,
while the GSC one isn't (and can't be as we need to do memory
allocations in the gsc worker). Therefore, we can't flush the latter
from the former.
The reason why we had such a flush was to avoid interrupting either
the GSC FW load or in progress GSC proxy operations. GSC proxy
operations fall into 2 categories:
1) GSC proxy init: this only happens once immediately after GSC FW load
and does not support being interrupted. The only way to recover from
an interruption of the proxy init is to do an FLR and re-load the GSC.
2) GSC proxy request: this can happen in response to a request that
the driver sends to the GSC. If this is interrupted, the GSC FW will
timeout and the driver request will be failed, but overall the GSC
will keep working fine.
Flushing the work allowed us to avoid interruption in both cases (unless
the hang came from the GSC engine itself, in which case we're toast
anyway). However, a failure on a proxy request is tolerable if we're in
a scenario where we're triggering a GT reset (i.e., something is already
gone pretty wrong), so what we really need to avoid is interrupting
the init flow, which we can do by polling on the register that reports
when the proxy init is complete (as that ensure us that all the load and
init operations have been completed).
Note that during suspend we still want to do a flush of the worker to
make sure it completes any operations involving the HW before the power
is cut.
v2: fix spelling in commit msg, rename waiter function (Julia)
Fixes: dd0e89e5edc2 ("drm/xe/gsc: GSC FW load")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4830
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://lore.kernel.org/r/20250502155104.2201469-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 12370bfcc4f0bdf70279ec5b570eb298963422b5)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
LNCF registers report wrong values when XE_FORCEWAKE_GT
only is held. Holding XE_FORCEWAKE_ALL ensures correct
operations on LNCF regs.
V2(Himal):
- Use xe_force_wake_ref_has_domain
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1999
Fixes: a6a4ea6d7d37 ("drm/xe: Add mocs kunit")
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250428082357.1730068-1-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit 70a2585e582058e94fe4381a337be42dec800337)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
For an unknown reason the math to determine the PF queue size does is
not correct - compute UMD applications are overflowing the PF queue
which is fatal. A multippier of 8 fixes the problem.
Fixes: 3338e4f90c14 ("drm/xe: Use topology to determine page fault queue size")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Link: https://lore.kernel.org/r/20250408155915.78770-1-matthew.brost@intel.com
(cherry picked from commit 29582e0ea75c95668d168b12406e3c56cf5a73c4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.
Fixes: 689275140cb8 ("drm/amdgpu/hdp7.0: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dbc064adfcf9095e7d895bea87b2f75c1ab23236)
Cc: stable@vger.kernel.org
|
|
Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.
Fixes: abe1cbaec6cf ("drm/amdgpu/hdp6.0: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 84141ff615951359c9a99696fd79a36c465ed847)
Cc: stable@vger.kernel.org
|
|
Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.
Fixes: f756dbac1ce1 ("drm/amdgpu/hdp5.2: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4a89b7698e771914b4d5b571600c76e2fdcbe2a9)
Cc: stable@vger.kernel.org
|
|
Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.
Fixes: cf424020e040 ("drm/amdgpu/hdp5.0: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a5cb344033c7598762e89255e8ff52827abb57a4)
Cc: stable@vger.kernel.org
|
|
Reading back the remapped HDP flush register seems to cause
problems on some platforms. All we need is a read, so read back
the memcfg register.
Fixes: c9b8dcabb52a ("drm/amdgpu/hdp4.0: do a posting read when flushing HDP")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-April/123150.html
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4119
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3908
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5c937b4a6050316af37ef214825b6340b5e9e391)
Cc: stable@vger.kernel.org
|
|
Set the s3/s0ix and s4 flags in the pm notifier so that we can skip
the resource evictions properly in pm prepare based on whether
we are suspending or hibernating. Drop the eviction as processes
are not frozen at this time, we we can end up getting stuck trying
to evict VRAM while applications continue to submit work which
causes the buffers to get pulled back into VRAM.
v2: Move suspend flags out of pm notifier (Mario)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4178
Fixes: 2965e6355dcd ("drm/amd: Add Suspend/Hibernate notification callback support")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 06f2dcc241e7e5c681f81fbc46cacdf4bfd7d6d7)
Cc: stable@vger.kernel.org
|
|
This reverts commit 3a9626c816db901def438dc2513622e281186d39.
This breaks S4 because we end up setting the s3/s0ix flags
even when we are entering s4 since prepare is used by both
flows. The causes both the S3/s0ix and s4 flags to be set
which breaks several checks in the driver which assume they
are mutually exclusive.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3634
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ce8f7d95899c2869b47ea6ce0b3e5bf304b2fff4)
Cc: stable@vger.kernel.org
|
|
VCN1_AON_SOC_ADDRESS_3_0 offset varies on different
VCN generations, the issue in vcn4.0.5 is caused by
a different VCN1_AON_SOC_ADDRESS_3_0 offset.
This patch does the following:
1. use the same offset for other VCN generations.
2. use the vcn4.0.5 special offset
3. update vcn_4_0 and vcn_5_0
Acked-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5c89ceda9984498b28716944633a9a01cbb2c90d)
Cc: stable@vger.kernel.org
|
|
[Why]
We incorrectly ack all bytes get written when the reply actually is defer.
When it's defer, means sink is not ready for the request. We should
retry the request.
[How]
Only reply all data get written when receive I2C_ACK|AUX_ACK. Otherwise,
reply the number of actual written bytes received from the sink.
Add some messages to facilitate debugging as well.
Fixes: ad6756b4d773 ("drm/amd/display: Shift dc link aux to aux_payload")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3637e457eb0000bc37d8bbbec95964aad2fb29fd)
Cc: stable@vger.kernel.org
|
|
[Why]
amdgpu_dm_process_dmub_aux_transfer_sync() should return all exact data
reply from the sink side. Don't do the analysis job in it.
[How]
Remove unnecessary check condition AUX_TRANSACTION_REPLY_AUX_ACK.
Fixes: ead08b95fa50 ("drm/amd/display: Fix race condition in DPIA AUX transfer")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9b540e3fe6796fec4fb1344f3be8952fc2f084d4)
Cc: stable@vger.kernel.org
|
|
[Why & How]
"Request length != reply length" is expected behavior defined in spec.
It's not an invalid reply. Besides, replied data handling logic is not
designed to be written in amdgpu_dm_process_dmub_aux_transfer_sync().
Remove the incorrectly handling section.
Fixes: ead08b95fa50 ("drm/amd/display: Fix race condition in DPIA AUX transfer")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 81b5c6fa62af62fe89ae9576f41aae37830b94cb)
Cc: stable@vger.kernel.org
|
|
[Why & How]
Fix the checking condition for detecting AUX_RET_ERROR_PROTOCOL_ERROR.
It was wrongly checking by "not equals to"
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1db6c9e9b62e1a8912f0a281c941099fca678da3)
Cc: stable@vger.kernel.org
|
|
[Why]
Defined value of dmub AUX reply command field get updated but didn't
adjust dm receiving side accordingly.
[How]
Check the received reply command value to see if it's updated version
or not. Adjust it if necessary.
Fixes: ead08b95fa50 ("drm/amd/display: Fix race condition in DPIA AUX transfer")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d5c9ade755a9afa210840708a12a8f44c0d532f4)
Cc: stable@vger.kernel.org
|
|
[Why]
Memory allocation occurs within dml21_validate() for adding phantom planes.
May cause kernel to be tainted due to usage of FP Start.
[How]
Move FP start from dml21_validate to before mode programming/mode support.
Calculations requiring floating point are all done within mode programming
or mode support.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fe3250f10819b411808ab9ae1d824c5fc9b59170)
|
|
[WHY & HOW]
Remove the unnecessary DC_FP_START/DC_FP_END pair to reduce time in
preempt_disable. It also fixes "BUG: sleeping function called from
invalid context" error messages because of calling kzalloc with
GFP_KERNEL which can sleep.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 94da0735b67b3ada90a3e2e017d306f070306f1d)
|
|
[Why]
FAMS2 expects vmin/vmax to be updated in the case when freesync is
off, but supported. But we only update it when freesync is enabled.
[How]
Change the vsync handler such that dc_stream_adjust_vmin_vmax() its called
irrespective of whether freesync is enabled. If freesync is supported,
then there is no harm in updating vmin/vmax registers.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3546
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cfb2d41831ee5647a4ae0ea7c24971a92d5dfa0d)
Cc: stable@vger.kernel.org
|
|
[Why]
"BUG: sleeping function called from invalid context" error.
after:
"drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()"
The populate_dml_plane_cfg_from_plane_state() uses the GFP_KERNEL flag
for memory allocation, which shouldn't be used in atomic contexts.
The allocation is needed only for using another helper function
get_scaler_data_for_plane().
[How]
Modify helpers to pass a pointer to scaler_data within existing context,
eliminating the need for dynamic memory allocation/deallocation
and copying.
Fixes: 366e77cd4923 ("drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bd3e84bc98f81b44f2c43936bdadc3241d654259)
Cc: stable@vger.kernel.org
|
|
Switch to panel timings based on datasheet for the AUO G101EVN01.0
LVDS panel. Default timings were tested on the panel.
Previous mode-based timings resulted in horizontal display shift.
Signed-off-by: Kevin Baker <kevinb@ventureresearch.com>
Fixes: 4fb86404a977 ("drm/panel: simple: Add AUO G101EVN010 panel support")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com
|
|
The abstraction was previously added to support separate
ttm_backup implementations.
However with the current implementation casting from a
struct file to a struct ttm_backup, we run into trouble since
struct file may have randomized the layout and gcc complains.
Remove the struct ttm_backup abstraction
Cc: dri-devel@lists.freedesktop.org
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Kees Cook <kees@kernel.org>
Closes: https://lore.kernel.org/dri-devel/9c8dbbafdaf9f3f089da2cde5a772d69579b3795.camel@linux.intel.com/T/#mb153ab9216cb813b92bdeb36f391ad4808c2ba29
Suggested-by: Christian König <christian.koenig@amd.com>
Fixes: 70d645deac98 ("drm/ttm: Add helpers for shrinking")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250502130014.3156-1-thomas.hellstrom@linux.intel.com
|
|
The docs were not properly updated from an earlier version of the code.
Fixes: e7b5d23e5d47 ("drm/ttm: Provide a shmem backup implementation")
Cc: Christian König <christian.koenig@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250502130101.3185-1-thomas.hellstrom@linux.intel.com
|
|
As seen in some recent failures, SLPC num_waiters value is < 0.
This happens because the inc/dec are not balanced. We should skip
decrement for the same conditions as the increment. Currently, we
do that for power saving profile mode. This patch also ensures that
num_waiters is incremented in the case min_softlimit is at boost
freq. It ensures that we don't reduce the frequency while this request
is in flight.
v2: Add Fixes tags
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13598
Fixes: f864a29afc32 ("drm/i915/slpc: Optmize waitboost for SLPC")
Fixes: 4a82ceb04ad4 ("drm/i915/slpc: Add sysfs for SLPC power profiles")
Cc: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Sk Anirban <sk.anirban@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://lore.kernel.org/r/20250428183555.3250021-1-vinay.belgaumkar@intel.com
(cherry picked from commit d26e55085f4b7a63677670db827541209257b313)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
|
|
Camm noticed that on parisc a SIGFPE exception will crash an application with
a second SIGFPE in the signal handler. Dave analyzed it, and it happens
because glibc uses a double-word floating-point store to atomically update
function descriptors. As a result of lazy binding, we hit a floating-point
store in fpe_func almost immediately.
When the T bit is set, an assist exception trap occurs when when the
co-processor encounters *any* floating-point instruction except for a double
store of register %fr0. The latter cancels all pending traps. Let's fix this
by clearing the Trap (T) bit in the FP status register before returning to the
signal handler in userspace.
The issue can be reproduced with this test program:
root@parisc:~# cat fpe.c
static void fpe_func(int sig, siginfo_t *i, void *v) {
sigset_t set;
sigemptyset(&set);
sigaddset(&set, SIGFPE);
sigprocmask(SIG_UNBLOCK, &set, NULL);
printf("GOT signal %d with si_code %ld\n", sig, i->si_code);
}
int main() {
struct sigaction action = {
.sa_sigaction = fpe_func,
.sa_flags = SA_RESTART|SA_SIGINFO };
sigaction(SIGFPE, &action, 0);
feenableexcept(FE_OVERFLOW);
return printf("%lf\n",1.7976931348623158E308*1.7976931348623158E308);
}
root@parisc:~# gcc fpe.c -lm
root@parisc:~# ./a.out
Floating point exception
root@parisc:~# strace -f ./a.out
execve("./a.out", ["./a.out"], 0xf9ac7034 /* 20 vars */) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
...
rt_sigaction(SIGFPE, {sa_handler=0x1110a, sa_mask=[], sa_flags=SA_RESTART|SA_SIGINFO}, NULL, 8) = 0
--- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0x1078f} ---
--- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0xf8f21237} ---
+++ killed by SIGFPE +++
Floating point exception
Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Reported-by: Camm Maguire <camm@maguirefamily.org>
Cc: stable@vger.kernel.org
|
|
Commit:
d54d610243a4 ("x86/boot/sev: Avoid shared GHCB page for early memory acceptance")
provided a fix for SEV-SNP memory acceptance from the EFI stub when
running at VMPL #0. However, that fix was insufficient for SVSM SEV-SNP
guests running at VMPL >0, as those rely on a SVSM calling area, which
is a shared buffer whose address is programmed into a SEV-SNP MSR, and
the SEV init code that sets up this calling area executes much later
during the boot.
Given that booting via the EFI stub at VMPL >0 implies that the firmware
has configured this calling area already, reuse it for performing memory
acceptance in the EFI stub.
Fixes: fcd042e86422 ("x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0")
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250428174322.2780170-2-ardb+git@google.com
|
|
When a CL/CSD job times out, we check if the GPU has made any progress
since the last timeout. If so, instead of resetting the hardware, we skip
the reset and let the timer get rearmed. This gives long-running jobs a
chance to complete.
However, when `timedout_job()` is called, the job in question is removed
from the pending list, which means it won't be automatically freed through
`free_job()`. Consequently, when we skip the reset and keep the job
running, the job won't be freed when it finally completes.
This situation leads to a memory leak, as exposed in [1] and [2].
Similarly to commit 704d3d60fec4 ("drm/etnaviv: don't block scheduler when
GPU is still active"), this patch ensures the job is put back on the
pending list when extending the timeout.
Cc: stable@vger.kernel.org # 6.0
Reported-by: Daivik Bhatia <dtgs1208@gmail.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12227 [1]
Closes: https://github.com/raspberrypi/linux/issues/6817 [2]
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250430210643.57924-1-mcanal@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
|
|
On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not
have a corresponding MPM pin and should not be handled inside the MPM
driver. The IRQ domain hierarchy is always applied, so it's required to
explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks
these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but
irq-qcom-mpm is currently missing the check. This is causing crashes when
setting up interrupts for non-wake GPIOs:
root@rb1:~# gpiomon -c gpiochip1 10
irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1
Unable to handle kernel paging request at virtual address ffff8000a1dc3820
Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT)
pc : mpm_set_type+0x80/0xcc
lr : mpm_set_type+0x5c/0xcc
Call trace:
mpm_set_type+0x80/0xcc (P)
qcom_mpm_set_type+0x64/0x158
irq_chip_set_type_parent+0x20/0x38
msm_gpio_irq_set_type+0x50/0x530
__irq_set_trigger+0x60/0x184
__setup_irq+0x304/0x6bc
request_threaded_irq+0xc8/0x19c
edge_detector_setup+0x260/0x364
linereq_create+0x420/0x5a8
gpio_ioctl+0x2d4/0x6c0
Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that
MPM is removed entirely from the hierarchy for non-wake GPIOs.
Fixes: a6199bb514d8 ("irqchip: Add Qualcomm MPM controller driver")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250502-irq-qcom-mpm-fix-no-wake-v1-1-8a1eafcd28d4@linaro.org
|
|
When calling scnprintf() to append recovery method to event_string,
the second argument should be `sizeof(event_string) - len`, otherwise
there is a potential overflow problem.
Fixes: b7cf9f4ac1b8 ("drm: Introduce device wedged event")
Signed-off-by: Feng Jiang <jiangfeng@kylinos.cn>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250409014633.31303-1-jiangfeng@kylinos.cn
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The 'has_dma_mapping' flag should be set once there is a
mapping so it could be unmapped in case of error.
v2:
- Resend for CI
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250428024752.881292-1-matthew.brost@intel.com
(cherry picked from commit f64cf7b681af72d3f715c0d0fd72091a54471c1a)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The version in the sysfs attribute should correspond to the version in
which this is enabled and visible for end users. It usually doesn't
correspond to the version in which the patch was developed, but rather a
release that will contain it. Update them to 6.15.
Fixes: dac328dea701 ("drm/xe/hwmon: expose package and vram temperature")
Reported-by: Ulisses Furquim <ulisses.furquim@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4840
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250421-hwmon-doc-fix-v1-1-9f68db702249@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 8500393a8e6c58e5e7c135133ad792fc6fd5b6f4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
On some paths in print_event_fields() it takes the trace_event_sem for
read, even though it should always be held when the function is called.
Remove the taking of that mutex and add a lockdep_assert_held_read() to
make sure the trace_event_sem is held when print_event_fields() is called.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250501224128.0b1f0571@batman.local.home
Fixes: 80a76994b2d88 ("tracing: Add "fields" option to show raw trace event fields")
Reported-by: syzbot+441582c1592938fccf09@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6813ff5e.050a0220.14dd7d.001b.GAE@google.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
This actually reverts 86e92eeeb237 ("bcachefs: Annotate struct bch_xattr
with __counted_by()").
After the x_name, there is a value. According to the disscussion[1],
__counted_by assumes that the flexible array member contains exactly
the amount of elements that are specified. Now there are users came across
a false positive detection of an out of bounds write caused by
the __counted_by here[2], so revert that.
[1] https://lore.kernel.org/lkml/Zv8VDKWN1GzLRT-_@archlinux/T/#m0ce9541c5070146320efd4f928cc1ff8de69e9b2
[2] https://privatebin.net/?a0d4e97d590d71e1#9bLmp2Kb5NU6X6cZEucchDcu88HzUQwHUah8okKPReEt
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The original code would skip null delay pointers, but when the pointers
were converted to point within the spi_device struct, the check was not
updated to skip delays of zero. Hence all spi devices that didn't set
delays would fail to probe.
Fixes: 04e6bb0d6bb1 ("spi: modify set_cs_timing parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://patch.msgid.link/20250423-spi-tegra114-v1-1-2d608bcc12f9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function trace_adjust_address() is used to map addresses of modules
stored in the persistent memory and are also loaded in the current boot to
return the current address for the module.
If there's only one module entry, it will simply use that, otherwise it
performs a bsearch of the entry array to find the modules to offset with.
The issue is if there are no modules in the array. The code does not
account for that and ends up referencing the first element in the array
which does not exist and causes a crash.
If nr_entries is zero, exit out early as if this was a core kernel
address.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250501151909.65910359@gandalf.local.home
Fixes: 35a380ddbc653 ("tracing: Show last module text symbols in the stacktrace")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The check for a failed memory location is incorrectly checking
the wrong level of pointer indirection by checking !filter_hash
rather than !*filter_hash. Fix this.
Cc: asami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250422221335.89896-1-colin.i.king@gmail.com
Fixes: 0ae6b8ce200d ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
syzbot reported this bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260
CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
__asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106
trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
....
==================================================================
It has been reported that trace_seq_to_buffer() tries to copy more data
than PAGE_SIZE to buf. Therefore, to prevent this, we should use the
smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument.
Link: https://lore.kernel.org/20250422113026.13308-1-aha310510@gmail.com
Reported-by: syzbot+c8cd2d2c412b868263fb@syzkaller.appspotmail.com
Fixes: 3c56819b14b0 ("tracing: splice support for tracing_pipe")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
00594 ------------[ cut here ]------------
00594 do not call blocking ops when !TASK_RUNNING; state=2 set at [<000000003e51ef4a>] prepare_to_wait_event+0x5c/0x1c0
00594 WARNING: CPU: 12 PID: 1117 at kernel/sched/core.c:8741 __might_sleep+0x74/0x88
00594 Modules linked in:
00594 CPU: 12 UID: 0 PID: 1117 Comm: umount Not tainted 6.15.0-rc4-ktest-g3a72e369412d #21845 PREEMPT
00594 Hardware name: linux,dummy-virt (DT)
00594 pstate: 60001005 (nZCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
00594 pc : __might_sleep+0x74/0x88
00594 lr : __might_sleep+0x74/0x88
00594 sp : ffffff80c8d67a90
00594 x29: ffffff80c8d67a90 x28: ffffff80f5903500 x27: 0000000000000000
00594 x26: 0000000000000000 x25: ffffff80cf5002a0 x24: ffffffc087dad000
00594 x23: ffffff80c8d67b40 x22: 0000000000000000 x21: 0000000000000000
00594 x20: 0000000000000242 x19: ffffffc080b92020 x18: 00000000ffffffff
00594 x17: 30303c5b20746120 x16: 74657320323d6574 x15: 617473203b474e49
00594 x14: 0000000000000001 x13: 00000000000c0000 x12: ffffff80facc0000
00594 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc0800b0774
00594 x8 : c0000000fffbffff x7 : ffffffc087dac670 x6 : 00000000015fffa8
00594 x5 : ffffff80facbffa8 x4 : ffffff80fbd30b90 x3 : 0000000000000000
00594 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff80f5903500
00594 Call trace:
00594 __might_sleep+0x74/0x88 (P)
00594 __mutex_lock+0x64/0x8d8
00594 mutex_lock_nested+0x28/0x38
00594 bch2_fs_ec_flush+0xf8/0x128
00594 __bch2_fs_read_only+0x54/0x1d8
00594 bch2_fs_read_only+0x3e0/0x438
00594 __bch2_fs_stop+0x5c/0x250
00594 bch2_put_super+0x18/0x28
00594 generic_shutdown_super+0x6c/0x140
00594 bch2_kill_sb+0x1c/0x38
00594 deactivate_locked_super+0x54/0xd0
00594 deactivate_super+0x70/0x90
00594 cleanup_mnt+0xec/0x188
00594 __cleanup_mnt+0x18/0x28
00594 task_work_run+0x90/0xd8
00594 do_notify_resume+0x138/0x148
00594 el0_svc+0x9c/0xa0
00594 el0t_64_sync_handler+0x104/0x130
00594 el0t_64_sync+0x154/0x158
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Commit a5951389e58d ("arm64: errata: Add newer ARM cores to the
spectre_bhb_loop_affected() lists") added some additional CPUs to the
Spectre-BHB workaround, including some new arrays for designs that
require new 'k' values for the workaround to be effective.
Unfortunately, the new arrays omitted the sentinel entry and so
is_midr_in_range_list() will walk off the end when it doesn't find a
match. With UBSAN enabled, this leads to a crash during boot when
is_midr_in_range_list() is inlined (which was more common prior to
c8c2647e69be ("arm64: Make _midr_in_range_list() an exported
function")):
| Internal error: aarch64 BRK: 00000000f2000001 [#1] PREEMPT SMP
| pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : spectre_bhb_loop_affected+0x28/0x30
| lr : is_spectre_bhb_affected+0x170/0x190
| [...]
| Call trace:
| spectre_bhb_loop_affected+0x28/0x30
| update_cpu_capabilities+0xc0/0x184
| init_cpu_features+0x188/0x1a4
| cpuinfo_store_boot_cpu+0x4c/0x60
| smp_prepare_boot_cpu+0x38/0x54
| start_kernel+0x8c/0x478
| __primary_switched+0xc8/0xd4
| Code: 6b09011f 54000061 52801080 d65f03c0 (d4200020)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: aarch64 BRK: Fatal exception
Add the missing sentinel entries.
Cc: Lee Jones <lee@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: <stable@vger.kernel.org>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: a5951389e58d ("arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250501104747.28431-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
EU stall sampling is not supported on SRIOV VF. Do not
initialize or open EU stall stream on SRIOV VF.
Fixes: 9a0b11d4cf3b ("drm/xe/eustall: Add support to init, enable and disable EU stall sampling")
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/10db5d1c7e17aadca7078ff74575b7ffc0d5d6b8.1745215022.git.harish.chegondi@intel.com
(cherry picked from commit 6ed20625a4b8189a1bd6598aa58e03147ce378ee)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Use a separate lock in the polling function eu_stall_data_buf_poll()
instead of eu_stall->stream_lock. This would prevent a possible
circular locking dependency leading to a deadlock as described below.
This would also require additional locking with the new lock in
the read function.
<4> [787.192986] ======================================================
<4> [787.192988] WARNING: possible circular locking dependency detected
<4> [787.192991] 6.14.0-rc7-xe+ #1 Tainted: G U
<4> [787.192993] ------------------------------------------------------
<4> [787.192994] xe_eu_stall/20093 is trying to acquire lock:
<4> [787.192996] ffff88819847e2c0 ((work_completion)
(&(&stream->buf_poll_work)->work)), at: __flush_work+0x1f8/0x5e0
<4> [787.193005] but task is already holding lock:
<4> [787.193007] ffff88814ce83ba8 (>->eu_stall->stream_lock){3:3},
at: xe_eu_stall_stream_ioctl+0x41/0x6a0 [xe]
<4> [787.193090] which lock already depends on the new lock.
<4> [787.193093] the existing dependency chain (in reverse order) is:
<4> [787.193095]
-> #1 (>->eu_stall->stream_lock){+.+.}-{3:3}:
<4> [787.193099] __mutex_lock+0xb4/0xe40
<4> [787.193104] mutex_lock_nested+0x1b/0x30
<4> [787.193106] eu_stall_data_buf_poll_work_fn+0x44/0x1d0 [xe]
<4> [787.193155] process_one_work+0x21c/0x740
<4> [787.193159] worker_thread+0x1db/0x3c0
<4> [787.193161] kthread+0x10d/0x270
<4> [787.193164] ret_from_fork+0x44/0x70
<4> [787.193168] ret_from_fork_asm+0x1a/0x30
<4> [787.193172]
-> #0 ((work_completion)(&(&stream->buf_poll_work)->work)){+.+.}-{0:0}:
<4> [787.193176] __lock_acquire+0x1637/0x2810
<4> [787.193180] lock_acquire+0xc9/0x300
<4> [787.193183] __flush_work+0x219/0x5e0
<4> [787.193186] cancel_delayed_work_sync+0x87/0x90
<4> [787.193189] xe_eu_stall_disable_locked+0x9a/0x260 [xe]
<4> [787.193237] xe_eu_stall_stream_ioctl+0x5b/0x6a0 [xe]
<4> [787.193285] __x64_sys_ioctl+0xa4/0xe0
<4> [787.193289] x64_sys_call+0x131e/0x2650
<4> [787.193292] do_syscall_64+0x91/0x180
<4> [787.193295] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<4> [787.193299]
other info that might help us debug this:
<4> [787.193302] Possible unsafe locking scenario:
<4> [787.193304] CPU0 CPU1
<4> [787.193305] ---- ----
<4> [787.193306] lock(>->eu_stall->stream_lock);
<4> [787.193308] lock((work_completion)
(&(&stream->buf_poll_work)->work));
<4> [787.193311] lock(>->eu_stall->stream_lock);
<4> [787.193313] lock((work_completion)
(&(&stream->buf_poll_work)->work));
<4> [787.193315]
*** DEADLOCK ***
Fixes: 760edec939685 ("drm/xe/eustall: Add support to read() and poll() EU stall data")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4598
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/c896932fca84f79db2df5942911997ed77b2b9b6.1744934656.git.harish.chegondi@intel.com
(cherry picked from commit c2b1f1b8641372bb2e563c49eb25632623a860fc)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
bch2_sb_disk_groups_to_cpu() goes off of the superblock member info, so
we need to set that first.
Reported-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
For vcn5.0.1 only, enable DPG PAUSE to avoid DPG resets.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3e5f86c14c3440171f2a3e7a68ceb739297726e9)
|
|
APUs in passthrough mode use HDP flush. 0x7F000 offset used for
remapping HDP flush is mapped to VPE space which could get power gated.
Use another unused offset in BIF space.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d8116a32cdbe456c7f511183eb9ab187e3d590fb)
Cc: stable@vger.kernel.org
|
|
If peer memory is XGMI-accessible, we should never access it through PCIe
P2P DMA mappings. PCIe P2P is slower, has different coherence behaviour,
limited or no support for atomics, or may not work at all. Fail with a
warning if DMABUF mappings of such memory are attempted.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dbe4c63689bc6b5fd3ab72650ea4b6a667e96a68)
|
|
The HDCP code in amdgpu_dm_hdcp.c copies pointers to amdgpu_dm_connector
objects without incrementing the kref reference counts. When using a
USB-C dock, and the dock is unplugged, the corresponding
amdgpu_dm_connector objects are freed, creating dangling pointers in the
HDCP code. When the dock is plugged back, the dangling pointers are
dereferenced, resulting in a slab-use-after-free:
[ 66.775837] BUG: KASAN: slab-use-after-free in event_property_validate+0x42f/0x6c0 [amdgpu]
[ 66.776171] Read of size 4 at addr ffff888127804120 by task kworker/0:1/10
[ 66.776179] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.14.0-rc7-00180-g54505f727a38-dirty #233
[ 66.776183] Hardware name: HP HP Pavilion Aero Laptop 13-be0xxx/8916, BIOS F.17 12/18/2024
[ 66.776186] Workqueue: events event_property_validate [amdgpu]
[ 66.776494] Call Trace:
[ 66.776496] <TASK>
[ 66.776497] dump_stack_lvl+0x70/0xa0
[ 66.776504] print_report+0x175/0x555
[ 66.776507] ? __virt_addr_valid+0x243/0x450
[ 66.776510] ? kasan_complete_mode_report_info+0x66/0x1c0
[ 66.776515] kasan_report+0xeb/0x1c0
[ 66.776518] ? event_property_validate+0x42f/0x6c0 [amdgpu]
[ 66.776819] ? event_property_validate+0x42f/0x6c0 [amdgpu]
[ 66.777121] __asan_report_load4_noabort+0x14/0x20
[ 66.777124] event_property_validate+0x42f/0x6c0 [amdgpu]
[ 66.777342] ? __lock_acquire+0x6b40/0x6b40
[ 66.777347] ? enable_assr+0x250/0x250 [amdgpu]
[ 66.777571] process_one_work+0x86b/0x1510
[ 66.777575] ? pwq_dec_nr_in_flight+0xcf0/0xcf0
[ 66.777578] ? assign_work+0x16b/0x280
[ 66.777580] ? lock_is_held_type+0xa3/0x130
[ 66.777583] worker_thread+0x5c0/0xfa0
[ 66.777587] ? process_one_work+0x1510/0x1510
[ 66.777588] kthread+0x3a2/0x840
[ 66.777591] ? kthread_is_per_cpu+0xd0/0xd0
[ 66.777594] ? trace_hardirqs_on+0x4f/0x60
[ 66.777597] ? _raw_spin_unlock_irq+0x27/0x60
[ 66.777599] ? calculate_sigpending+0x77/0xa0
[ 66.777602] ? kthread_is_per_cpu+0xd0/0xd0
[ 66.777605] ret_from_fork+0x40/0x90
[ 66.777607] ? kthread_is_per_cpu+0xd0/0xd0
[ 66.777609] ret_from_fork_asm+0x11/0x20
[ 66.777614] </TASK>
[ 66.777643] Allocated by task 10:
[ 66.777646] kasan_save_stack+0x39/0x60
[ 66.777649] kasan_save_track+0x14/0x40
[ 66.777652] kasan_save_alloc_info+0x37/0x50
[ 66.777655] __kasan_kmalloc+0xbb/0xc0
[ 66.777658] __kmalloc_cache_noprof+0x1c8/0x4b0
[ 66.777661] dm_dp_add_mst_connector+0xdd/0x5c0 [amdgpu]
[ 66.777880] drm_dp_mst_port_add_connector+0x47e/0x770 [drm_display_helper]
[ 66.777892] drm_dp_send_link_address+0x1554/0x2bf0 [drm_display_helper]
[ 66.777901] drm_dp_check_and_send_link_address+0x187/0x1f0 [drm_display_helper]
[ 66.777909] drm_dp_mst_link_probe_work+0x2b8/0x410 [drm_display_helper]
[ 66.777917] process_one_work+0x86b/0x1510
[ 66.777919] worker_thread+0x5c0/0xfa0
[ 66.777922] kthread+0x3a2/0x840
[ 66.777925] ret_from_fork+0x40/0x90
[ 66.777927] ret_from_fork_asm+0x11/0x20
[ 66.777932] Freed by task 1713:
[ 66.777935] kasan_save_stack+0x39/0x60
[ 66.777938] kasan_save_track+0x14/0x40
[ 66.777940] kasan_save_free_info+0x3b/0x60
[ 66.777944] __kasan_slab_free+0x52/0x70
[ 66.777946] kfree+0x13f/0x4b0
[ 66.777949] dm_dp_mst_connector_destroy+0xfa/0x150 [amdgpu]
[ 66.778179] drm_connector_free+0x7d/0xb0
[ 66.778184] drm_mode_object_put.part.0+0xee/0x160
[ 66.778188] drm_mode_object_put+0x37/0x50
[ 66.778191] drm_atomic_state_default_clear+0x220/0xd60
[ 66.778194] __drm_atomic_state_free+0x16e/0x2a0
[ 66.778197] drm_mode_atomic_ioctl+0x15ed/0x2ba0
[ 66.778200] drm_ioctl_kernel+0x17a/0x310
[ 66.778203] drm_ioctl+0x584/0xd10
[ 66.778206] amdgpu_drm_ioctl+0xd2/0x1c0 [amdgpu]
[ 66.778375] __x64_sys_ioctl+0x139/0x1a0
[ 66.778378] x64_sys_call+0xee7/0xfb0
[ 66.778381] do_syscall_64+0x87/0x140
[ 66.778385] entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fix this by properly incrementing and decrementing the reference counts
when making and deleting copies of the amdgpu_dm_connector pointers.
(Mario: rebase on current code and update fixes tag)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4006
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Fixes: da3fd7ac0bcf3 ("drm/amd/display: Update CP property based on HW query")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://lore.kernel.org/r/20250417215005.37964-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d4673f3c3b3dcb74e36e53cdfc880baa7a87b330)
Cc: stable@vger.kernel.org
|
|
In case the CMD_RTS got corrupted by interferences, the MSE102x
doesn't allow a retransmission of the command. Instead the Ethernet
frame must be shifted out of the SPI FIFO. Since the actual length is
unknown, assume the maximum possible value.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-5-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Shuicheng Lin
Daniele Ceraolo Spurio
Tejas Upadhyay
Matthew Brost
Alex Deucher
Ruijing Dong
Wayne Lin
Austin Zheng
Alex Hung
Aurabindo Pillai
Roman Li
Kevin Baker
Thomas Hellström
Vinay Belgaumkar
Linus Torvalds
Helge Deller
Ard Biesheuvel
Maíra Canal
Stephan Gerhold
Feng Jiang
Dafna Hirschfeld
Lucas De Marchi
Steven Rostedt
Alan Huang
Aaron Kling
Colin Ian King
Jeongjun Park
Kent Overstreet
Will Deacon
Harish Chegondi
Sonny Jiang
Lijo Lazar
Felix Kuehling
Chris Bainbridge
Stefan Wahren