aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-07-28ceph: cleanup ceph_flush_snaps()Yan, Zheng3-88/+105
This patch devide __ceph_flush_snaps() into two stags. In the first stage, __ceph_flush_snaps() assign snapcaps flush TIDs and add them to cap flush lists. __ceph_flush_snaps() keeps holding the i_ceph_lock in this stagge. So inode's auth cap can not change. In the second stage, __ceph_flush_snaps() send flushsnap cap messages. i_ceph_lock is unlocked before sending each cap message. If auth cap changes in the middle, __ceph_flush_snaps() just stops. This is OK because kick_flushing_inode_caps() will re-send flushsnap cap messages to inode's new auth MDS. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: kick cap flushes before sending other cap messageYan, Zheng1-9/+34
If ceph_check_caps() wants to send cap message to a recovering MDS, make sure it kicks cap flushes first. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: introduce an inode flag to indicates if snapflush is neededYan, Zheng3-15/+36
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: avoid sending duplicated cap flush messageYan, Zheng2-1/+18
make ceph_kick_flushing_caps() ignore inodes whose cap flushes have already been re-sent by ceph_early_kick_flushing_caps() Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: unify cap flush and snapcap flushYan, Zheng5-222/+175
This patch includes following changes - Assign flush tid to snapcap flush - Remove session's s_cap_snaps_flushing list. Add inode to session's s_cap_flushing list instead. Inode is removed from the list when there is no pending snapcap flush or cap flush. - make __kick_flushing_caps() re-send both snapcap flushes and cap flushes. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: use list instead of rbtree to track cap flushesYan, Zheng5-118/+56
We don't have requirement of searching cap flush by TID. In most cases, we just need to know TID of the oldest cap flush. List is ideal for this usage. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: update types of some local variblesYan, Zheng1-11/+12
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: include 'follows' of pending snapflush in cap reconnect messageYan, Zheng1-1/+16
This helps the recovering MDS to reconstruct the internal states that tracking pending snapflush. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: update cap reconnect message to version 3Yan, Zheng1-21/+47
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: mount non-default filesystem by nameYan, Zheng4-17/+117
To mount non-default filesytem, user currently needs to provide mds namespace ID. This is inconvenience. This patch makes user be able to mount filesystem by name. If user wants to mount non-default filesystem. Client first subscribes to fsmap.user. Subscribe to mdsmap.<ID> after getting ID of filesystem. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28libceph: fsmap.user subscription supportYan, Zheng3-4/+8
Signed-off-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-07-28ceph: handle LOOKUP_RCU in ceph_d_revalidateJeff Layton1-6/+14
We can now handle the snapshot cases under RCU, as well as the non-snapshot case when we don't need to queue up a lease renewal allow LOOKUP_RCU walks to proceed under those conditions. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: allow dentry_lease_is_valid to work under RCU walkJeff Layton1-15/+26
Under rcuwalk, we need to take extra care when dereferencing d_parent. We want to do that once and pass a pointer to dentry_lease_is_valid. Also, we must ensure that that function can handle the case where we're racing with d_release. Check whether "di" is NULL under the d_lock, and just return 0 if so. Finally, we still need to kick off a renewal job if the lease is getting close to expiration. If that's the case, then just drop out of rcuwalk mode since that could block. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: clear d_fsinfo pointer under d_lockJeff Layton1-1/+5
To check for a valid dentry lease, we need to get at the ceph_dentry_info. Under rcuwalk though, we may end up with a dentry that is on its way to destruction. Since we need to take the d_lock in dentry_lease_is_valid already, we can just ensure that we clear the d_fsinfo pointer out under the same lock before destroying it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: remove ceph_mdsc_lease_releaseJeff Layton2-45/+0
Nothing calls it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: don't use ->d_timeMiklos Szeredi4-8/+8
Pretty simple: just use ceph_dentry_info.time instead (which was already there, unused). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-28ceph: fix spelling mistake: "resgister" -> "register"Colin Ian King1-1/+1
trivial fix to spelling mistake in pr_err message Signed-off-by: Colin Ian King <colin.king@canonical.com>
2016-07-28ceph: fix NULL dereference in ceph_queue_cap_snap()Yan, Zheng1-1/+1
old_snapc->seq is used in dout(...) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: wait unsafe sync writes for evicting inodeYan, Zheng5-48/+61
Otherwise ceph_sync_write_unsafe() may access/modify freed inode. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: fix use-after-free bug in ceph_direct_read_write()Yan, Zheng1-2/+5
ceph_aio_complete() can free the ceph_aio_request struct before the code exits the while loop. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: reduce i_nr_by_mode array sizeYan, Zheng5-23/+36
Track usage count for individual fmode bit. This can reduce the array size by half. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: set user pages dirty after direct IO readYan, Zheng1-2/+2
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28ceph: rados pool namespace supportYan, Zheng8-77/+159
This patch adds codes that decode pool namespace information in cap message and request reply. Pool namespace is saved in i_layout, it will be passed to libceph when doing read/write. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28libceph: make sure redirect does not change namespaceYan, Zheng1-0/+15
Signed-off-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-07-28libceph: rados pool namespace supportYan, Zheng7-20/+92
Add pool namesapce pointer to struct ceph_file_layout and struct ceph_object_locator. Pool namespace is used by when mapping object to PG, it's also used when composing OSD request. The namespace pointer in struct ceph_file_layout is RCU protected. So libceph can read namespace without taking lock. Signed-off-by: Yan, Zheng <zyan@redhat.com> [idryomov@gmail.com: ceph_oloc_destroy(), misc minor changes] Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-07-28libceph: introduce reference counted stringYan, Zheng5-1/+177
The data structure is for storing namesapce string. It allows namespace string to be shared between cephfs inodes with same layout. This data structure can also be referenced by OSD request. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28libceph: define new ceph_file_layout structureYan, Zheng12-89/+103
Define new ceph_file_layout structure and rename old ceph_file_layout to ceph_file_layout_legacy. This is preparation for adding namespace to ceph_file_layout structure. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-28libceph: add start en/decoding block helpersIlya Dryomov1-0/+54
Add ceph_start_encoding() and ceph_start_decoding(), the equivalent of ENCODE_START and DECODE_START in the userspace ceph code. This is based on a patch from Mike Christie <michaelc@cs.wisc.edu>. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-07-28libceph: add an ONSTACK initializer for oidsIlya Dryomov2-1/+6
An on-stack oid in ceph_ioctl_get_dataloc() is not initialized, resulting in a WARN and a NULL pointer dereference later on. We will have more of these on-stack in the future, so fix it with a convenience macro. Fixes: d30291b985d1 ("libceph: variable-sized ceph_object_id") Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-07-28libceph: fix some missing includesIlya Dryomov4-1/+3
- decode.h needs slab.h for kmalloc() - osd_client.h needs msgpool.h for struct ceph_msgpool - msgpool.h doesn't need messenger.h Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-07-24Linux 4.7Linus Torvalds1-1/+1
2016-07-23pps: do not crash when failed to registerJiri Slaby1-1/+1
With this command sequence: modprobe plip modprobe pps_parport rmmod pps_parport the partport_pps modules causes this crash: BUG: unable to handle kernel NULL pointer dereference at (null) IP: parport_detach+0x1d/0x60 [pps_parport] Oops: 0000 [#1] SMP ... Call Trace: parport_unregister_driver+0x65/0xc0 [parport] SyS_delete_module+0x187/0x210 The sequence that builds up to this is: 1) plip is loaded and takes the parport device for exclusive use: plip0: Parallel port at 0x378, using IRQ 7. 2) pps_parport then fails to grab the device: pps_parport: parallel port PPS client parport0: cannot grant exclusive access for device pps_parport pps_parport: couldn't register with parport0 3) rmmod of pps_parport is then killed because it tries to access pardev->name, but pardev (taken from port->cad) is NULL. So add a check for NULL in the test there too. Link: http://lkml.kernel.org/r/20160714115245.12651-1-jslaby@suse.cz Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-23tools/vm/slabinfo: fix an unintentional printfDan Carpenter1-1/+2
The curly braces are missing here so we print stuff unintentionally. Fixes: 9da4714a2d44 ('slub: slabinfo update for cmpxchg handling') Link: http://lkml.kernel.org/r/20160715211243.GE19522@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-23testing/radix-tree: fix a macro expansion bugDan Carpenter1-1/+1
There are no parentheses around this macro and it causes a problem when we do: index = rand() % THRASH_SIZE; Link: http://lkml.kernel.org/r/20160715210953.GC19522@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-23radix-tree: fix radix_tree_iter_retry() for tagged iterators.Andrey Ryabinin1-0/+1
radix_tree_iter_retry() resets slot to NULL, but it doesn't reset tags. Then NULL slot and non-zero iter.tags passed to radix_tree_next_slot() leading to crash: RIP: radix_tree_next_slot include/linux/radix-tree.h:473 find_get_pages_tag+0x334/0x930 mm/filemap.c:1452 .... Call Trace: pagevec_lookup_tag+0x3a/0x80 mm/swap.c:960 mpage_prepare_extent_to_map+0x321/0xa90 fs/ext4/inode.c:2516 ext4_writepages+0x10be/0x2b20 fs/ext4/inode.c:2736 do_writepages+0x97/0x100 mm/page-writeback.c:2364 __filemap_fdatawrite_range+0x248/0x2e0 mm/filemap.c:300 filemap_write_and_wait_range+0x121/0x1b0 mm/filemap.c:490 ext4_sync_file+0x34d/0xdb0 fs/ext4/fsync.c:115 vfs_fsync_range+0x10a/0x250 fs/sync.c:195 vfs_fsync fs/sync.c:209 do_fsync+0x42/0x70 fs/sync.c:219 SYSC_fdatasync fs/sync.c:232 SyS_fdatasync+0x19/0x20 fs/sync.c:230 entry_SYSCALL_64_fastpath+0x23/0xc1 arch/x86/entry/entry_64.S:207 We must reset iterator's tags to bail out from radix_tree_next_slot() and go to the slow-path in radix_tree_next_chunk(). Fixes: 46437f9a554f ("radix-tree: fix race in gang lookup") Link: http://lkml.kernel.org/r/1468495196-10604-1-git-send-email-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-23mm: memcontrol: fix cgroup creation failure after many small jobsJohannes Weiner3-24/+87
The memory controller has quite a bit of state that usually outlives the cgroup and pins its CSS until said state disappears. At the same time it imposes a 16-bit limit on the CSS ID space to economically store IDs in the wild. Consequently, when we use cgroups to contain frequent but small and short-lived jobs that leave behind some page cache, we quickly run into the 64k limitations of outstanding CSSs. Creating a new cgroup fails with -ENOSPC while there are only a few, or even no user-visible cgroups in existence. Although pinning CSSs past cgroup removal is common, there are only two instances that actually need an ID after a cgroup is deleted: cache shadow entries and swapout records. Cache shadow entries reference the ID weakly and can deal with the CSS having disappeared when it's looked up later. They pose no hurdle. Swap-out records do need to pin the css to hierarchically attribute swapins after the cgroup has been deleted; though the only pages that remain swapped out after offlining are tmpfs/shmem pages. And those references are under the user's control, so they are manageable. This patch introduces a private 16-bit memcg ID and switches swap and cache shadow entries over to using that. This ID can then be recycled after offlining when the CSS remains pinned only by objects that don't specifically need it. This script demonstrates the problem by faulting one cache page in a new cgroup and deleting it again: set -e mkdir -p pages for x in `seq 128000`; do [ $((x % 1000)) -eq 0 ] && echo $x mkdir /cgroup/foo echo $$ >/cgroup/foo/cgroup.procs echo trex >pages/$x echo $$ >/cgroup/cgroup.procs rmdir /cgroup/foo done When run on an unpatched kernel, we eventually run out of possible IDs even though there are no visible cgroups: [root@ham ~]# ./cssidstress.sh [...] 65000 mkdir: cannot create directory '/cgroup/foo': No space left on device After this patch, the IDs get released upon cgroup destruction and the cache and css objects get released once memory reclaim kicks in. [hannes@cmpxchg.org: init the IDR] Link: http://lkml.kernel.org/r/20160621154601.GA22431@cmpxchg.org Fixes: b2052564e66d ("mm: memcontrol: continue cache reclaim from offlined groups") Link: http://lkml.kernel.org/r/20160617162516.GD19084@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: John Garcia <john.garcia@mesosphere.io> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Nikolay Borisov <kernel@kyup.com> Cc: <stable@vger.kernel.org> [3.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-22gpio: tegra: don't auto-enable for COMPILE_TESTArnd Bergmann1-2/+5
I stumbled over a build error with COMPILE_TEST and CONFIG_OF disabled: drivers/gpio/gpio-tegra.c: In function 'tegra_gpio_probe': drivers/gpio/gpio-tegra.c:603:9: error: 'struct gpio_chip' has no member named 'of_node' The problem is that the newly added GPIO_TEGRA Kconfig symbol does not have a dependency on CONFIG_OF. However, there is another problem here as the driver gets enabled unconditionally whenever COMPILE_TEST is set. This fixes both problems, by making the symbol user-visible when COMPILE_TEST is set and default-enabled for ARCH_TEGRA=y. As a side-effect, it is now possible to compile-test a Tegra kernel with GPIO support disabled, which is harmless. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 4dd4dd1d2120 ("gpio: tegra: Allow compile test") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22libceph: apply new_state before new_up_client on incrementalsIlya Dryomov1-43/+113
Currently, osd_weight and osd_state fields are updated in the encoding order. This is wrong, because an incremental map may look like e.g. new_up_client: { osd=6, addr=... } # set osd_state and addr new_state: { osd=6, xorstate=EXISTS } # clear osd_state Suppose osd6's current osd_state is EXISTS (i.e. osd6 is down). After applying new_up_client, osd_state is changed to EXISTS | UP. Carrying on with the new_state update, we flip EXISTS and leave osd6 in a weird "!EXISTS but UP" state. A non-existent OSD is considered down by the mapping code 2087 for (i = 0; i < pg->pg_temp.len; i++) { 2088 if (ceph_osd_is_down(osdmap, pg->pg_temp.osds[i])) { 2089 if (ceph_can_shift_osds(pi)) 2090 continue; 2091 2092 temp->osds[temp->size++] = CRUSH_ITEM_NONE; and so requests get directed to the second OSD in the set instead of the first, resulting in OSD-side errors like: [WRN] : client.4239 192.168.122.21:0/2444980242 misdirected client.4239.1:2827 pg 2.5df899f2 to osd.4 not [1,4,6] in e680/680 and hung rbds on the client: [ 493.566367] rbd: rbd0: write 400000 at 11cc00000 (0) [ 493.566805] rbd: rbd0: result -6 xferred 400000 [ 493.567011] blk_update_request: I/O error, dev rbd0, sector 9330688 The fix is to decouple application from the decoding and: - apply new_weight first - apply new_state before new_up_client - twiddle osd_state flags if marking in - clear out some of the state if osd is destroyed Fixes: http://tracker.ceph.com/issues/14901 Cc: stable@vger.kernel.org # 3.15+: 6dd74e44dc1d: libceph: set 'exists' flag for newly up osd Cc: stable@vger.kernel.org # 3.15+ Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com>
2016-07-22crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request structHerbert Xu1-2/+2
To allow for child request context the struct akcipher_request child_req needs to be at the end of the structure. Cc: stable@vger.kernel.org Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-22ovl: verify upper dentry in ovl_remove_and_whiteout()Maxim Patlasov1-30/+24
The upper dentry may become stale before we call ovl_lock_rename_workdir. For example, someone could (mistakenly or maliciously) manually unlink(2) it directly from upperdir. To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir and and check if it matches the upper dentry. Essentially, it is the same problem and similar solution as in commit 11f3710417d0 ("ovl: verify upper dentry before unlink and rename"). Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-07-22packet: propagate sock_cmsg_send() errorSoheil Hassas Yeganeh1-3/+1
sock_cmsg_send() can return different error codes and not only -EINVAL, and we should properly propagate them. Fixes: c14ac9451c34 ("sock: enable timestamping using control messages") Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-21crypto: qat - make qat_asym_algs.o depend on asn1 headersJan Stancek1-0/+1
Parallel build can sporadically fail because asn1 headers may not be built yet by the time qat_asym_algs.o is compiled: drivers/crypto/qat/qat_common/qat_asym_algs.c:55:32: fatal error: qat_rsapubkey-asn1.h: No such file or directory #include "qat_rsapubkey-asn1.h" Cc: stable@vger.kernel.org Signed-off-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-20Input: tsc200x - report proper input_dev nameMichael Welling4-6/+25
Passes input_id struct to the common probe function for the tsc200x drivers instead of just the bustype. This allows for the use of the product variable to set the input_dev->name variable according to the type of touchscreen used. Note that when we introduced support for TSC2004 we started calling everything TSC200X, so let's keep this quirk. Signed-off-by: Michael Welling <mwelling@ieee.org> Cc: stable@vger.kernel.org Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-20tty/vt/keyboard: fix OOB access in do_compute_shiftstate()Dmitry Torokhov1-21/+9
The size of individual keymap in drivers/tty/vt/keyboard.c is NR_KEYS, which is currently 256, whereas number of keys/buttons in input device (and therefor in key_down) is much larger - KEY_CNT - 768, and that can cause out-of-bound access when we do sym = U(key_maps[0][k]); with large 'k'. To fix it we should not attempt iterating beyond smaller of NR_KEYS and KEY_CNT. Also while at it let's switch to for_each_set_bit() instead of open-coding it. Reported-by: Sasha Levin <sasha.levin@oracle.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-20net/mlx5e: Fix del vxlan port command buffer memsetSaeed Mahameed1-2/+2
memset the command buffers rather than the pointers to them. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19packet: fix second argument of sock_tx_timestamp()Yoshihiro Shimoda1-3/+3
This patch fixes an issue that a syscall (e.g. sendto syscall) cannot work correctly. Since the sendto syscall doesn't have msg_control buffer, the sock_tx_timestamp() in packet_snd() cannot work correctly because the socks.tsflags is set to 0. So, this patch sets the socks.tsflags to sk->sk_tsflags as default. Fixes: c14ac9451c34 ("sock: enable timestamping using control messages") Reported-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Reported-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19Input: synaptics-rmi4 - fix maximum size check for F12 control register 8Andrew Duggan1-4/+5
According to the RMI4 spec the maximum size of F12 control register 8 is 15 bytes. The current code incorrectly reports an error if control 8 is greater then 14. Making sensors with a control register 8 with 15 bytes unusable. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reported-by: Chris Healy <cphealy@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-19net: switchdev: change ageing_time type to clock_tVivien Didelot1-1/+1
The switchdev value for the SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME attribute is a clock_t and requires to use helpers such as clock_t_to_jiffies() to convert to milliseconds. Change ageing_time type from u32 to clock_t to make it explicit. Fixes: f55ac58ae64c ("switchdev: add bridge ageing_time attribute") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19Update maintainer for EHEA driver.Douglas Miller1-1/+1
Since Thadeu left IBM, EHEA has gone mostly unmaintained, since his email address doesn't work anymore. I'm stepping up to help maintain this driver upstream. I'm adding Thadeu's personal e-mail address in Cc, hoping that we can get his ack. CC: Thadeu Lima de Souza Cascardo <cascardo@cascardo.eti.br> Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@cascardo.eti.br> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19net/mlx4_en: Add resilience in low memory systemsEugenia Emantayev3-37/+132
This patch fixes the lost of Ethernet port on low memory system, when driver frees its resources and fails to allocate new resources. Issue could happen while changing number of channels, rings size or changing the timestamp configuration. This fix is necessary because of removing vmap use in the code. When vmap was in use driver could allocate non-contiguous memory and make it contiguous with vmap. Now it could fail to allocate a large chunk of contiguous memory and lose the port. Current code tries to allocate new resources and then upon success frees the old resources. Fixes: 73898db04301 ('net/mlx4: Avoid wrong virtual mappings') Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.