| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Making virt_to_pfn() a static inline taking a strongly typed
(const void *) makes the contract of a passing a pointer of that
type to the function explicit and exposes any misuse of the
macro virt_to_pfn() acting polymorphic and accepting many types
such as (void *), (unitptr_t) or (unsigned long) as arguments
without warnings.
For symmetry do the same with pfn_to_virt() reflecting the
current layout in asm-generic/page.h.
Doing this reveals a number of offenders in the arch code and
the S390-specific drivers, so just bite the bullet and fix up
all of those as well.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20230812-virt-to-phys-s390-v2-1-6c40f31fe36f@linaro.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Make multi-line comment style consistent across the source.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Real Memory Copy and (absolute) Lowcore areas are
not accounted when virtual memory layout is set up.
Fixes: 4df29d2b9024 ("s390/smp: rework absolute lowcore access")
Fixes: 2f0e8aae26a2 ("s390/mm: rework memcpy_real() to avoid DAT-off mode")
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Make Real Memory Copy area size and mask explicit.
This does not bring any functional change and only
needed for clarity.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The separate vmalloc area size check against _REGION2_SIZE
is needed in case user provided insanely large value using
vmalloc= kernel command line parameter. That could lead to
overflow and selecting 3 page table levels instead of 4.
Use size_add() for the overflow check and get rid of the
extra vmalloc area check.
With the current values of CONFIG_MAX_PHYSMEM_BITS and
PAGES_PER_SECTION the sum of maximal possible size of
identity mapping and vmemmap area (derived from these
macros) plus modules area size MODULES_LEN can not
overflow. Thus, that sum is used as first addend while
vmalloc area size is second addend for size_add().
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
All *.S files under arch/s390/ have been converted to include
<linux/export.h> instead of <asm/export.h>.
Remove <asm/export.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20230806151641.394720-3-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Commit ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm/export.h>, which is now a wrapper of <linux/export.h>.
Replace #include <asm/export.h> with #include <linux/export.h>.
After all the <asm/export.h> lines are converted, <asm/export.h> and
<asm-generic/export.h> will be removed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20230806151641.394720-2-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
There is no EXPORT_SYMBOL line there, hence #include <asm/export.h>
is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20230806151641.394720-1-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Globally setting a bit in control registers is done with
smp_ctl_set_clear_bit(). This is using on_each_cpu() to execute a function
which actually sets the control register bit on each online CPU. This can
be problematic since on_each_cpu() does not prevent that new CPUs come
online while it is executed, which in turn means that control register
updates could be missing on new CPUs.
In order to prevent this problem make sure that global control register
contents cannot change until new CPUs have initialized their control
registers, and marked themselves online, so they are included in subsequent
on_each_cpu() calls.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
A build failure was reported when sha256() is not present:
gcc-13.1.0-nolibc/s390-linux/bin/s390-linux-ld: arch/s390/kernel/cert_store.o: in function `check_certificate_hash':
arch/s390/kernel/cert_store.c:267: undefined reference to `sha256'
Therefore make CONFIG_CERT_STORE select CRYPTO_LIB_SHA256.
Fixes: 8cf57d7217c3 ("s390: add support for user-defined certificates")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/all/8ecb57fb-4560-bdfc-9e55-63e3b0937132@infradead.org/
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230728100430.1567328-1-svens@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The 'rc' will be re-assigned to 0 after calling get_vcssb(), it
needs be set to error code if create_cs_keyring() fails.
[hca@linux.ibm.com: slightly changed coding style]
Fixes: 8cf57d7217c3 ("s390: add support for user-defined certificates")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230728084228.3186083-1-yangyingliang@huawei.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use consistent comment style within the whole pfault C code.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Cleanup the pfault inline assemblies:
- Use symbolic names for operands
- Add extra linebreaks, and whitespace to improve readability
In addition, change __pfault_init() to return -EOPNOTSUPP in case of
an exception, and don't return a made up valid diag 258 return value
(aka "8").
This allows to simplify the inline assembly, and makes debugging
easier, in case something is broken.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
early_param() is the standard way of defining early kernel command
line parameters. Use that instead of the old __setup() variant.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
struct pfault_refbk is naturally packed and aligned; remove not needed
packed and aligned attributes.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Remove another leftover of the 31 bit area: replace the not needed
"unsigned long long" suffix with "unsigned long", and stay consistent
with the rest of the code.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The pfault code has nothing to do with regular fault handling.
Therefore move it to an own C file. Also add an own pfault header
file. This way changes to setup.h don't cause a recompile of the
pfault code and vice versa.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Enable recording and printing function return values
for the function graph tracer.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Nathan Chancellor reported the following build error when compiling the
kernel with CONFIG_MARCH_Z10=y:
arch/s390/kernel/mcount.S: Assembler messages:
arch/s390/kernel/mcount.S:140: Error: Unrecognized opcode: `aghik'
The aghik instruction is only available since z196. Use the la instruction
instead which is available for all machines.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20230725211105.GA224840@dev-arch.thelio-3990X
Fixes: 1256e70a082a ("s390/ftrace: enable HAVE_FUNCTION_GRAPH_RETVAL")
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Link: https://lore.kernel.org/r/20230726061834.1300984-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
s/ECBDIC/EBCDIC/ (C and B are swapped)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/08ed63331699177b3354458da66a2f63c0217e49.1686407113.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The comment above diag8c() describes diagnose 210, not diagnose 8c.
Add a proper short description.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The single build rule does not work with the drivers-y syntax. [1]
Use the standard obj-y syntax. It moves the objects from drivers/s390/
to slightly lower address, but fixes the reported issue.
[1]: https://lore.kernel.org/linux-kbuild/d57ba55f-20a3-b836-783d-b49c8a161b6e@kernel.org/T/#m27f781ab60acadfed8a9e9642f30d5414a5e2df3
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230721171358.3612099-1-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
and fix all in-tree references.
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230718045550.495428-1-costa.shul@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
ftrace_trace_function expects a struct ftrace_regs, but the s390
architecure code passes struct pt_regs. This isn't a problem with the
current code because struct ftrace_regs contains only one member:
struct pt_regs. To avoid issues in the future this should be fixed.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
ENOSYS should only be returned to userspace when a syscall
is not implemented. The only known user, 'hyptop' is not explicitely
checking for -ENOSYS, therefore use EOPNOTSUPP instead. It is very
unlikely that there are other users, so this change should have no
impact on userspace.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
There are no users of VMEM_MAX_PHYS macro left, remove it.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Interface segment_warning() reports maximum mappable physical
address for -ERANGE error. Currently that address is the value
of VMEM_MAX_PHYS macro, but that well might change. A better
way to obtain that address is calling arch_get_mappable_range()
callback - one that is used by vmem_add_mapping() and generates
-ERANGE error in the first place.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
As per description in mm/memory_hotplug.c platforms should define
arch_get_mappable_range() that provides maximum possible addressable
physical memory range for which the linear mapping could be created.
The current implementation uses VMEM_MAX_PHYS macro as the maximum
mappable physical address and it is simply a cast to vmemmap. Since
the address is in physical address space the natural upper limit of
MAX_PHYSMEM_BITS is honoured:
vmemmap_start = min(vmemmap_start, 1UL << MAX_PHYSMEM_BITS);
Further, to make sure the identity mapping would not overlay with
vmemmap, the size of identity mapping could be stripped like this:
ident_map_size = min(ident_map_size, vmemmap_start);
Similarily, any other memory that could be added (e.g DCSS segment)
should not overlay with vmemmap as well and that is prevented by
using vmemmap (VMEM_MAX_PHYS macro) as the upper limit.
However, while the use of VMEM_MAX_PHYS brings the desired result
it actually poses two issues:
1. As described, vmemmap is handled as a physical address, although
it is actually a pointer to struct page in virtual address space.
2. As vmemmap is a virtual address it could have been located
anywhere in the virtual address space. However, the desired
necessity to honour MAX_PHYSMEM_BITS limit prevents that.
Rework arch_get_mappable_range() callback in a way it does not
use VMEM_MAX_PHYS macro and does not confuse the notion of virtual
vs physical address spacees as result. That paves the way for moving
vmemmap elsewhere and optimizing the virtual address space layout.
Introduce max_mappable preserved boot variable and let function
setup_kernel_memory_layout() set it up. As result, the rest of the
code is does not need to know the virtual memory layout specifics.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The value of ident_map_size could never exceed the value of
vmemmap as secured by setup_kernel_memory_layout() function:
/* make sure identity map doesn't overlay with vmemmap */
ident_map_size = min(ident_map_size, vmemmap_start);
Since VMEM_MAX_PHYS macro is set to vmemmap and a newly added
range is checked against ident_map_size in add_memory_merged()
function anyway, the check against VMEM_MAX_PHYS is redundant.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Fix virtual vs physical address confusion (which currently are the same).
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use IS_ALIGNED() instead of cumbersome bit manipulations.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Make machine_kexec.o and relocate_kernel.o depend on
CONFIG_KEXEC_CORE option as other architectures do.
Still generate machine_kexec_reloc.o unconditionally,
since arch_kexec_do_relocs() function is neded by the
decompressor.
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add support for tracing return values in the function graph tracer.
This requires return_to_handler() to record gpr2 and the frame pointer
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The s390_hypfs filesystem is deprecated and shouldn't be used due to its
rather odd semantics. It creates a whole directory structure with static
file contents so a user can read a consistent state while within that
directory.
Writing to its update attribute will remove and rebuild nearly the whole
filesystem, so that again a user can read a consistent state, even if
multiple files need to be read.
Given that this wastes a lot of CPU cycles, and involves a lot of code,
binary interfaces have been added quite a couple of years ago, which simply
pass the binary data to user space, and let user space decode the data.
This is the preferred and only way how the data should be retrieved.
The assumption is that there are no users of the s390_hypfs filesystem.
However instead of just removing the code, and having to revert in case
there are actually users, factor the filesystem code out and make it only
available via a new config option.
This config option is supposed to be disabled. If it turns out there are no
complaints the filesystem code can be removed probably in a couple of
years.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Get rid of page_align_ptr() and use PTR_ALIGN() instead.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Simplify memory allocation for diagnose 204 memory buffer:
- allocate with __vmalloc_node() to enure page alignment
- allocate real / physical memory area also within vmalloc area and handle
vmalloc to real / physical address translation within diag204().
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Remove the legacy device driver code for CEX2 and CEX3 cards.
The last machines which are able to handle CEX2 crypto cards
are z10 EC first available 2008 and z10 BC first available 2009.
The last machines able to handle a CEX3 crypto card are
z196 first available 2010 and z114 first available 2011.
Please note that this does not imply to drop CEX2 and CEX3
support in general. With older kernels on hardware up to the
aforementioned machine models these crypto cards will get
support by IBM.
The removal of the CEX2 and CEX3 device drivers code opens up
some simplifications, for example support for crypto cards
without rng support can be removed also.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
vmalloc() does not guarantee any alignment, unless it is explicitly
requested with e.g. __vmalloc_node(). Using diag204() with subcode 7
requires a 4k aligned virtual buffer. Therefore switch to __vmalloc_node().
Note: with the current vmalloc() implementation callers would still get a
4k aligned area, even though this is quite non-obvious looking at the
code. So changing this in sthyi doesn't fix a real bug. It is just to make
sure the code will not suffer from some obscure options, like it happened
in the past with kmalloc() where debug options changed the assumed
alignment of allocated memory areas.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Diagnose 204 subcode 4 requires a real (physical) address, but a
virtual address is passed to the inline assembly.
Convert the address to a physical address for only this specific case.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Enable receiving the user-defined certificates from the s390x
hypervisor via new diagnose 0x320 calls, and make them available to the
Linux root user as 'cert_store_key' type keys in a so-called
'cert_store' keyring.
New user-space interfaces:
/sys/firmware/cert_store/refresh
Writing to this attribute re-fetches certificates via DIAG 0x320
/sys/firmware/cert_store/cs_status
Reading from this attribute returns either of:
"uninitialized"
If no certificate has been retrieved yet
"ok"
If certificates have been successfully retrieved
"failed (<number>)"
If certificate retrieval failed with reason code <number>
New debug trace areas:
/sys/kernel/debug/s390dbf/cert_store_msg
/sys/kernel/debug/s390dbf/cert_store_hexdump
Usage example:
To initiate request for certificates available to the system as root:
$ echo 1 > /sys/firmware/cert_store/refresh
Upon success the '/sys/firmware/cert_store/cs_status' contains
the value 'ok'.
$ cat /sys/firmware/cert_store/cs_status
ok
Get the ID of the keyring 'cert_store':
$ keyctl search @us keyring cert_store
OR
$ keyctl link @us @s; keyctl request keyring cert_store
Obtain list of IDs of certificates:
$ keyctl rlist <cert_store keyring ID>
Display certificate content as hex-dump:
$ keyctl read <certificate ID>
Read certificate contents as binary data:
$ keyctl pipe <certificate ID> >cert_data
Display certificate description:
$ keyctl describe <certificate ID>
The certificate description has the following format:
<64 bytes certificate name in EBCDIC> ':'
<certificate index as obtained from hypervisor> ':'
<certificate store token obtained from hypervisor>
The certificate description in /proc/keys has certificate name
represented in ASCII.
Users can read but cannot update the content of the certificate.
Signed-off-by: Anastasia Eskova <anastasia.eskova@ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
|
|
`rustc` outputs by default the temporary files (i.e. the ones saved
by `-Csave-temps`, such as `*.rcgu*` files) in the current working
directory when `-o` and `--out-dir` are not given (even if
`--emit=x=path` is given, i.e. it does not use those for temporaries).
Since out-of-tree modules are compiled from the `linux` tree,
`rustc` then tries to create them there, which may not be accessible.
Thus pass `--out-dir` explicitly, even if it is just for the temporary
files.
Similarly, do so for Rust host programs too.
Reported-by: Raphael Nestler <raphael.nestler@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/1015
Reported-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Raphael Nestler <raphael.nestler@gmail.com> # non-hostprogs
Tested-by: Andrea Righi <andrea.righi@canonical.com> # non-hostprogs
Fixes: 295d8398c67e ("kbuild: specify output names separately for each emission type from rustc")
Cc: stable@vger.kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit 6018b585e8c6 ("tracing/histograms: Add histograms to hist_vars if
they have referenced variables") added a check to fail histogram creation
if save_hist_vars() failed to add histogram to hist_vars list. But the
commit failed to set ret to failed return code before jumping to
unregister histogram, fix it.
Link: https://lore.kernel.org/linux-trace-kernel/20230714203341.51396-1-mkhalfella@purestorage.com
Cc: stable@vger.kernel.org
Fixes: 6018b585e8c6 ("tracing/histograms: Add histograms to hist_vars if they have referenced variables")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When ring_buffer_swap_cpu was called during resize process,
the cpu buffer was swapped in the middle, resulting in incorrect state.
Continuing to run in the wrong state will result in oops.
This issue can be easily reproduced using the following two scripts:
/tmp # cat test1.sh
//#! /bin/sh
for i in `seq 0 100000`
do
echo 2000 > /sys/kernel/debug/tracing/buffer_size_kb
sleep 0.5
echo 5000 > /sys/kernel/debug/tracing/buffer_size_kb
sleep 0.5
done
/tmp # cat test2.sh
//#! /bin/sh
for i in `seq 0 100000`
do
echo irqsoff > /sys/kernel/debug/tracing/current_tracer
sleep 1
echo nop > /sys/kernel/debug/tracing/current_tracer
sleep 1
done
/tmp # ./test1.sh &
/tmp # ./test2.sh &
A typical oops log is as follows, sometimes with other different oops logs.
[ 231.711293] WARNING: CPU: 0 PID: 9 at kernel/trace/ring_buffer.c:2026 rb_update_pages+0x378/0x3f8
[ 231.713375] Modules linked in:
[ 231.714735] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15
[ 231.716750] Hardware name: linux,dummy-virt (DT)
[ 231.718152] Workqueue: events update_pages_handler
[ 231.719714] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 231.721171] pc : rb_update_pages+0x378/0x3f8
[ 231.722212] lr : rb_update_pages+0x25c/0x3f8
[ 231.723248] sp : ffff800082b9bd50
[ 231.724169] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000
[ 231.726102] x26: 0000000000000001 x25: fffffffffffff010 x24: 0000000000000ff0
[ 231.728122] x23: ffff0000c3a0b600 x22: ffff0000c3a0b5c0 x21: fffffffffffffe0a
[ 231.730203] x20: ffff0000c3a0b600 x19: ffff0000c0102400 x18: 0000000000000000
[ 231.732329] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffe7aa8510
[ 231.734212] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000002
[ 231.736291] x11: ffff8000826998a8 x10: ffff800082b9baf0 x9 : ffff800081137558
[ 231.738195] x8 : fffffc00030e82c8 x7 : 0000000000000000 x6 : 0000000000000001
[ 231.740192] x5 : ffff0000ffbafe00 x4 : 0000000000000000 x3 : 0000000000000000
[ 231.742118] x2 : 00000000000006aa x1 : 0000000000000001 x0 : ffff0000c0007208
[ 231.744196] Call trace:
[ 231.744892] rb_update_pages+0x378/0x3f8
[ 231.745893] update_pages_handler+0x1c/0x38
[ 231.746893] process_one_work+0x1f0/0x468
[ 231.747852] worker_thread+0x54/0x410
[ 231.748737] kthread+0x124/0x138
[ 231.749549] ret_from_fork+0x10/0x20
[ 231.750434] ---[ end trace 0000000000000000 ]---
[ 233.720486] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 233.721696] Mem abort info:
[ 233.721935] ESR = 0x0000000096000004
[ 233.722283] EC = 0x25: DABT (current EL), IL = 32 bits
[ 233.722596] SET = 0, FnV = 0
[ 233.722805] EA = 0, S1PTW = 0
[ 233.723026] FSC = 0x04: level 0 translation fault
[ 233.723458] Data abort info:
[ 233.723734] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 233.724176] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 233.724589] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 233.725075] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000104943000
[ 233.725592] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
[ 233.726231] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 233.726720] Modules linked in:
[ 233.727007] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15
[ 233.727777] Hardware name: linux,dummy-virt (DT)
[ 233.728225] Workqueue: events update_pages_handler
[ 233.728655] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 233.729054] pc : rb_update_pages+0x1a8/0x3f8
[ 233.729334] lr : rb_update_pages+0x154/0x3f8
[ 233.729592] sp : ffff800082b9bd50
[ 233.729792] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000
[ 233.730220] x26: 0000000000000000 x25: ffff800082a8b840 x24: ffff0000c0102418
[ 233.730653] x23: 0000000000000000 x22: fffffc000304c880 x21: 0000000000000003
[ 233.731105] x20: 00000000000001f4 x19: ffff0000c0102400 x18: ffff800082fcbc58
[ 233.731727] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000001
[ 233.732282] x14: ffff8000825fe0c8 x13: 0000000000000001 x12: 0000000000000000
[ 233.732709] x11: ffff8000826998a8 x10: 0000000000000ae0 x9 : ffff8000801b760c
[ 233.733148] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffff0000c03298c0
[ 233.733553] x5 : 0000000000000002 x4 : 0000000000000000 x3 : 0000000000000000
[ 233.733972] x2 : ffff0000c3a0b600 x1 : 0000000000000000 x0 : 0000000000000000
[ 233.734418] Call trace:
[ 233.734593] rb_update_pages+0x1a8/0x3f8
[ 233.734853] update_pages_handler+0x1c/0x38
[ 233.735148] process_one_work+0x1f0/0x468
[ 233.735525] worker_thread+0x54/0x410
[ 233.735852] kthread+0x124/0x138
[ 233.736064] ret_from_fork+0x10/0x20
[ 233.736387] Code: 92400000 910006b5 aa000021 aa0303f7 (f9400060)
[ 233.736959] ---[ end trace 0000000000000000 ]---
After analysis, the seq of the error is as follows [1-5]:
int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size,
int cpu_id)
{
for_each_buffer_cpu(buffer, cpu) {
cpu_buffer = buffer->buffers[cpu];
//1. get cpu_buffer, aka cpu_buffer(A)
...
...
schedule_work_on(cpu,
&cpu_buffer->update_pages_work);
//2. 'update_pages_work' is queue on 'cpu', cpu_buffer(A) is passed to
// update_pages_handler, do the update process, set 'update_done' in
// complete(&cpu_buffer->update_done) and to wakeup resize process.
//---->
//3. Just at this moment, ring_buffer_swap_cpu is triggered,
//cpu_buffer(A) be swaped to cpu_buffer(B), the max_buffer.
//ring_buffer_swap_cpu is called as the 'Call trace' below.
Call trace:
dump_backtrace+0x0/0x2f8
show_stack+0x18/0x28
dump_stack+0x12c/0x188
ring_buffer_swap_cpu+0x2f8/0x328
update_max_tr_single+0x180/0x210
check_critical_timing+0x2b4/0x2c8
tracer_hardirqs_on+0x1c0/0x200
trace_hardirqs_on+0xec/0x378
el0_svc_common+0x64/0x260
do_el0_svc+0x90/0xf8
el0_svc+0x20/0x30
el0_sync_handler+0xb0/0xb8
el0_sync+0x180/0x1c0
//<----
/* wait for all the updates to complete */
for_each_buffer_cpu(buffer, cpu) {
cpu_buffer = buffer->buffers[cpu];
//4. get cpu_buffer, cpu_buffer(B) is used in the following process,
//the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong.
//for example, cpu_buffer(A)->update_done will leave be set 1, and will
//not 'wait_for_completion' at the next resize round.
if (!cpu_buffer->nr_pages_to_update)
continue;
if (cpu_online(cpu))
wait_for_completion(&cpu_buffer->update_done);
cpu_buffer->nr_pages_to_update = 0;
}
...
}
//5. the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong,
//Continuing to run in the wrong state, then oops occurs.
Link: https://lore.kernel.org/linux-trace-kernel/202307191558478409990@zte.com.cn
Signed-off-by: Chen Lin <chen.lin5@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Since commit 08d43a5fa063 ("tracing: Add lock-free tracing_map"),
this is never used, so can be removed.
Link: https://lore.kernel.org/linux-trace-kernel/20230722032123.24664-1-yuehaibing@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Make it slightly easier to see which compiler options are added and
removed (and not worry about column limit too!).
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Like C source files, tooling can find it useful to have the assembly
source file compilation recorded.
The .S extension appears to used across all architectures.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
During allocations, while looking for preallocations(PA) in the per
inode rbtree, we can't do a direct traversal of the tree because
ext4_mb_discard_group_preallocation() can paralelly mark the pa deleted
and that can cause direct traversal to skip some entries. This was
leading to a BUG_ON() being hit [1] when we missed a PA that could satisfy
our request and ultimately tried to create a new PA that would overlap
with the missed one.
To makes sure we handle that case while still keeping the performance of
the rbtree, we make use of the fact that the only pa that could possibly
overlap the original goal start is the one that satisfies the below
conditions:
1. It must have it's logical start immediately to the left of
(ie less than) original logical start.
2. It must not be deleted
To find this pa we use the following traversal method:
1. Descend into the rbtree normally to find the immediate neighboring
PA. Here we keep descending irrespective of if the PA is deleted or if
it overlaps with our request etc. The goal is to find an immediately
adjacent PA.
2. If the found PA is on right of original goal, use rb_prev() to find
the left adjacent PA.
3. Check if this PA is deleted and keep moving left with rb_prev() until
a non deleted PA is found.
4. This is the PA we are looking for. Now we can check if it can satisfy
the original request and proceed accordingly.
This approach also takes care of having deleted PAs in the tree.
(While we are at it, also fix a possible overflow bug in calculating the
end of a PA)
[1] https://lore.kernel.org/linux-ext4/CA+G9fYv2FRpLqBZf34ZinR8bU2_ZRAUOjKAD3+tKRFaEQHtt8Q@mail.gmail.com/
Cc: stable@kernel.org # 6.4
Fixes: 3872778664e3 ("ext4: Use rbtrees to manage PAs instead of inode i_prealloc_list")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Ritesh Harjani (IBM) ritesh.list@gmail.com
Tested-by: Ritesh Harjani (IBM) ritesh.list@gmail.com
Link: https://lore.kernel.org/r/edd2efda6a83e6343c5ace9deea44813e71dbe20.1690045963.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In ext4_mb_choose_next_group_best_avail(), we want the start order to be
1 less than goal length and the min_order to be, at max, 1 more than the
original length. This commit fixes an off by one issue that arose due to
the fact that 1 << fls(n) > (n).
After all the processing:
order = 1 order below goal len
min_order = maximum of the three:-
- order - trim_order
- 1 order below B2C(s_stripe)
- 1 order above original len
Cc: stable@kernel.org
Fixes: 33122aa930 ("ext4: Add allocation criteria 1.5 (CR1_5)")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230609103403.112807-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When run on a file system where the inline_data feature has been
enabled, xfstests generic/269, generic/270, and generic/476 cause ext4
to emit error messages indicating that inline directory entries are
corrupted. This occurs because the inline offset used to locate
inline directory entries in the inode body is not updated when an
xattr in that shared region is deleted and the region is shifted in
memory to recover the space it occupied. If the deleted xattr precedes
the system.data attribute, which points to the inline directory entries,
that attribute will be moved further up in the region. The inline
offset continues to point to whatever is located in system.data's former
location, with unfortunate effects when used to access directory entries
or (presumably) inline data in the inode body.
Cc: stable@kernel.org
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20230522181520.1570360-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
Linus Walleij
Alexander Gordeev
Masahiro Yamada
Heiko Carstens
Sven Schnelle
Yang Yingliang
Christophe JAILLET
Costa Shulyupin
Harald Freudenberger
Anastasia Eskova
Linus Torvalds
Miguel Ojeda
Mohamed Khalfella
Chen Lin
YueHaibing
Alexey Dobriyan
Benjamin Gray
Ojaswin Mujoo
Eric Whitney