aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2021-04-11rtw88: coex: fix A2DP stutters while WL busy + WL scanChing-Te Ku2-4/+6
While WL scan, WL is more high priority than BT. The packets from AP will be a big interference to A2DP. It will lead to A2DP stutters. Stop answering CTS to AP to decrease AP's packets Tx while WL scan + WL busy. Enable BT AFH feature to make BT leave away from WL channel. Desired BT firmware BT-COEX version: 0x1c Desired WL firmware version: 9.9.x Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210319054218.3319-8-pkshih@realtek.com
2021-04-11rtw88: 8822c: add LC calibration for RTL8822CPo-Hao Huang5-2/+47
Fix power tracking issue by replacing unnecessary IQ calibration with LC calibration. When thermal difference exceeds limitation, let RF circuit adjsut its characteristic to fit in current environment. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210319054218.3319-6-pkshih@realtek.com
2021-04-11rtw88: 8822c: update tx power limit table to RF v40.1Zong-Zhe Yang1-343/+343
update tx power limits to RF v40 and apply fix on FCC's channel 12 and 13, so change the patch level to 1. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210319054218.3319-5-pkshih@realtek.com
2021-04-11rtw88: fix DIG min settingZong-Zhe Yang1-4/+5
DIG min is expected to be set according to chip. And actually we assigned it under each chip information. However, we didn't use the setting when we did DIG process. It is unexpected, so we fix it. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210319054218.3319-4-pkshih@realtek.com
2021-04-11rtw88: add flush hci supportZong-Zhe Yang3-0/+87
Though mac queue flushing has been supported, sometimes data may be waiting on interface from host to chip. If it occurs, there may still be data that flows into mac just after we do flush. To avoid that, we add the hci part of flushing. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210319054218.3319-2-pkshih@realtek.com
2021-03-15rtw88: 8822c: support FW crash dump when FW crashZong-Zhe Yang7-14/+172
Although FW crash logs are already supported for dumping in driver, the logs may not be sufficient to analyze field issues. To improve this part, we add a support to dump FW memory. When driver receives FW crash notifications, driver uses DDMA, which is a HW ability, to copy specified FW memory to FW fifo. Driver can then dump these information from FW fifo. With this support, not only FW crash log but also specified FW memory will be dumped while FW crash. Besides, specified registers are also dumped. This feature is implemeted on 8822C first due to difference of FW layouts between ICs. In addition, we add a debugfs to trigger FW crash. It can simulate the process of crash, dump and reset. Through it, we can also check if a reset is ongoing. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210309060121.9099-1-pkshih@realtek.com
2021-03-15wilc1000: use wilc handler as cookie in request_threaded_irq()Ajay Singh1-9/+5
Use same cookie for request_threaded_irq() & free_irq() to properly free IRQ during module unload. free_irq() already uses *wilc* handler so the changes are required for request_threaded_irq(). Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210225042302.17048-1-ajay.kathat@microchip.com
2021-03-15wilc1000: write value to WILC_INTR2_ENABLE registerMarcus Folkesson1-1/+1
Write the value instead of reading it twice. Fixes: c5c77ba18ea6 ("staging: wilc1000: Add SDIO/SPI 802.11 driver") Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210224163706.519658-1-marcus.folkesson@gmail.com
2021-03-15wilc1000: Support chip sleep over SPIDavid Mosberger-Tang2-4/+58
chip_allow_sleep() only supported wakeup via SDIO, which made the driver unusable over SPI. This code is a straight forward port from the driver in the linux-at91 repository. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Acked-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210224033317.1507603-1-davidm@egauge.net
2021-03-15rtw88: remove unnecessary variablewengjianfeng1-2/+1
The variable ret is defined at the beginning and initialized to 0 until the function returns ret, and the variable ret is not reassigned.Therefore, we do not need to define the variable ret, just return 0 directly at the end of the function. Signed-off-by: wengjianfeng <wengjianfeng@yulong.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210223075438.13676-1-samirweng1979@163.com
2021-03-15rtw88: coex: add power off settingPing-Ke Shih3-0/+7
Clear WL/BT on/off bit in scoreboard register that is used to exchange WL/BT status. Since the status is preserved after warm reboot, we must clear it when WL is going to down. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210219054140.7835-1-pkshih@realtek.com