| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add generic port support for the parsing of HMAT system locality sub-table.
The attributes will be added to the third array member of the access
coordinates in order to not mix with the existing memory attributes. It
only provides the system locality attributes from initiator to the
generic port targets and is missing the rest of the data to the actual
memory device.
The complete attributes will be updated when a memory device is
attached and the system locality information is calculated end to end.
Through hmat_update_target_attrs(), the best performance attributes will
be setup in target->coord.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/170319618135.2212653.13778540010384821833.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Refactor hmat_parse_locality() to break up the deep nesting of the
function.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/170319617537.2212653.10625501075519862509.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add SRAT parsing for the HMAT init in order to collect the device handle
from the Generic Port Affinity Structure. The device handle will serve as
the key to search for target data.
Consolidate the common code with alloc_memory_target() in a helper function
alloc_target().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/170319616951.2212653.14862375982250406464.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create enums to provide named indexing for the access coordinate array.
This is in preparation for adding generic port support which will add a
third index in the array to keep the generic port attributes separate from
the memory attributes.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/170319616332.2212653.3872789279950567889.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Dan Williams suggested changing the struct 'node_hmem_attrs' to
'access_coordinates' [1]. The struct is a container of r/w-latency and
r/w-bandwidth numbers. Moving forward, this container will also be used by
CXL to store the performance characteristics of each link hop in
the PCIE/CXL topology. So, where node_hmem_attrs is just the access
parameters of a memory-node, access_coordinates applies more broadly
to hardware topology characteristics. The observation is that seemed like
an exercise in having the application identify "where" it falls on a
spectrum of bandwidth and latency needs. For the tuple of
read/write-latency and read/write-bandwidth, "coordinates" is not a perfect
fit. Sometimes it is just conveying values in isolation and not a
"location" relative to other performance points, but in the end this data
is used to identify the performance operation point of a given memory-node.
[2]
Link: http://lore.kernel.org/r/64471313421f7_1b66294d5@dwillia2-xfh.jf.intel.com.notmuch/
Link: https://lore.kernel.org/linux-cxl/645e6215ee0de_1e6f2945e@dwillia2-xfh.jf.intel.com.notmuch/
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/170319615734.2212653.15319394025985499185.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The CDAT table is very similar to ACPI tables when it comes to sub-table
and entry structures. The helper functions can be also used to parse the
CDAT table. Add support to the helper functions to deal with an external
CDAT table, and also handle the endieness since CDAT can be processed by a
BE host. Export a function cdat_table_parse() for CXL driver to parse
a CDAT table.
In order to minimize ACPICA code changes, __force is being utilized to deal
with the case of a big endian (BE) host parsing a CDAT. All CDAT data
structure variables are being force casted to __leX as appropriate.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/170319615131.2212653.10932785667981494238.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
|
|
Our btrfs subvolume snapshot <source> <destination> utility enforces
that <source> is the root of the subvolume, however this isn't enforced
in the kernel. Update the kernel to also enforce this limitation to
avoid problems with other users of this ioctl that don't have the
appropriate checks in place.
Reported-by: Martin Michaelis <code@mgjm.de>
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are multiple ways to grab references to credentials, and the only
protection we have against overflowing it is the memory required to do
so.
With memory sizes only moving in one direction, let's bump the reference
count to 64-bit and move it outside the realm of feasibly overflowing.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit 40613da52b13fb21c5566f10b287e0ca8c12c4e9 and the
subsequent fix to it:
cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus")
40613da52b13 fixed a problem where hot-adding a device with large BARs
failed if the bridge windows programmed by firmware were not large enough.
cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources()
only for non-root bus") fixed a problem with 40613da52b13: an ACPI hot-add
of a device on a PCI root bus (common in the virt world) or firmware
sending ACPI Bus Check to non-existent Root Ports (e.g., on Dell Inspiron
7352/0W6WV0) caused a NULL pointer dereference and suspend/resume hangs.
Unfortunately the combination of 40613da52b13 and cc22522fd55e caused other
problems:
- Fiona reported that hot-add of SCSI disks in QEMU virtual machine fails
sometimes.
- Dongli reported a similar problem with hot-add of SCSI disks.
- Jonathan reported a console freeze during boot on bare metal due to an
error in radeon GPU initialization.
Revert both patches to avoid adding these problems. This means we will
again see the problems with hot-adding devices with large BARs and the NULL
pointer dereferences and suspend/resume issues that 40613da52b13 and
cc22522fd55e were intended to fix.
Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary")
Fixes: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus")
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Closes: https://lore.kernel.org/r/9eb669c0-d8f2-431d-a700-6da13053ae54@proxmox.com
Reported-by: Dongli Zhang <dongli.zhang@oracle.com>
Closes: https://lore.kernel.org/r/3c4a446a-b167-11b8-f36f-d3c1b49b42e9@oracle.com
Reported-by: Jonathan Woithe <jwoithe@just42.net>
Closes: https://lore.kernel.org/r/ZXpaNCLiDM+Kv38H@marvin.atrad.com.au
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Cc: <stable@vger.kernel.org>
|
|
As the ring buffer recording requires cmpxchg() to work, if the
architecture does not support cmpxchg in NMI, then do not do any recording
within an NMI.
Link: https://lore.kernel.org/linux-trace-kernel/20231213175403.6fc18540@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The rb_time_cmpxchg() on 32-bit architectures requires setting three
32-bit words to represent the 64-bit timestamp, with some salt for
synchronization. Those are: msb, top, and bottom
The issue is, the rb_time_cmpxchg() did not properly salt the msb portion,
and the msb that was written was stale.
Link: https://lore.kernel.org/linux-trace-kernel/20231215084114.20899342@rorschach.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: f03f2abce4f39 ("ring-buffer: Have 32 bit time stamps use all 64 bits")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The following race can cause rb_time_read() to observe a corrupted time
stamp:
rb_time_cmpxchg()
[...]
if (!rb_time_read_cmpxchg(&t->msb, msb, msb2))
return false;
if (!rb_time_read_cmpxchg(&t->top, top, top2))
return false;
<interrupted before updating bottom>
__rb_time_read()
[...]
do {
c = local_read(&t->cnt);
top = local_read(&t->top);
bottom = local_read(&t->bottom);
msb = local_read(&t->msb);
} while (c != local_read(&t->cnt));
*cnt = rb_time_cnt(top);
/* If top and msb counts don't match, this interrupted a write */
if (*cnt != rb_time_cnt(msb))
return false;
^ this check fails to catch that "bottom" is still not updated.
So the old "bottom" value is returned, which is wrong.
Fix this by checking that all three of msb, top, and bottom 2-bit cnt
values match.
The reason to favor checking all three fields over requiring a specific
update order for both rb_time_set() and rb_time_cmpxchg() is because
checking all three fields is more robust to handle partial failures of
rb_time_cmpxchg() when interrupted by nested rb_time_set().
Link: https://lore.kernel.org/lkml/20231211201324.652870-1-mathieu.desnoyers@efficios.com/
Link: https://lore.kernel.org/linux-trace-kernel/20231212193049.680122-1-mathieu.desnoyers@efficios.com
Fixes: f458a1453424e ("ring-buffer: Test last update in 32bit version of __rb_time_read()")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Mathieu Desnoyers pointed out an issue in the rb_time_cmpxchg() for 32 bit
architectures. That is:
static bool rb_time_cmpxchg(rb_time_t *t, u64 expect, u64 set)
{
unsigned long cnt, top, bottom, msb;
unsigned long cnt2, top2, bottom2, msb2;
u64 val;
/* The cmpxchg always fails if it interrupted an update */
if (!__rb_time_read(t, &val, &cnt2))
return false;
if (val != expect)
return false;
<<<< interrupted here!
cnt = local_read(&t->cnt);
The problem is that the synchronization counter in the rb_time_t is read
*after* the value of the timestamp is read. That means if an interrupt
were to come in between the value being read and the counter being read,
it can change the value and the counter and the interrupted process would
be clueless about it!
The counter needs to be read first and then the value. That way it is easy
to tell if the value is stale or not. If the counter hasn't been updated,
then the value is still good.
Link: https://lore.kernel.org/linux-trace-kernel/20231211201324.652870-1-mathieu.desnoyers@efficios.com/
Link: https://lore.kernel.org/linux-trace-kernel/20231212115301.7a9c9a64@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 10464b4aa605e ("ring-buffer: Add rb_time_t 64 bit operations for speeding up 32 bit")
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When filtering is enabled, a temporary buffer is created to place the
content of the trace event output so that the filter logic can decide
from the trace event output if the trace event should be filtered out or
not. If it is to be filtered out, the content in the temporary buffer is
simply discarded, otherwise it is written into the trace buffer.
But if an interrupt were to come in while a previous event was using that
temporary buffer, the event written by the interrupt would actually go
into the ring buffer itself to prevent corrupting the data on the
temporary buffer. If the event is to be filtered out, the event in the
ring buffer is discarded, or if it fails to discard because another event
were to have already come in, it is turned into padding.
The update to the write_stamp in the rb_try_to_discard() happens after a
fix was made to force the next event after the discard to use an absolute
timestamp by setting the before_stamp to zero so it does not match the
write_stamp (which causes an event to use the absolute timestamp).
But there's an effort in rb_try_to_discard() to put back the write_stamp
to what it was before the event was added. But this is useless and
wasteful because nothing is going to be using that write_stamp for
calculations as it still will not match the before_stamp.
Remove this useless update, and in doing so, we remove another
cmpxchg64()!
Also update the comments to reflect this change as well as remove some
extra white space in another comment.
Link: https://lore.kernel.org/linux-trace-kernel/20231215081810.1f4f38fe@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Fixes: b2dd797543cf ("ring-buffer: Force absolute timestamp on discard of event")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If an update to an event is interrupted by another event between the time
the initial event allocated its buffer and where it wrote to the
write_stamp, the code try to reset the write stamp back to the what it had
just overwritten. It knows that it was overwritten via checking the
before_stamp, and if it didn't match what it wrote to the before_stamp
before it allocated its space, it knows it was overwritten.
To put back the write_stamp, it uses the before_stamp it read. The problem
here is that by writing the before_stamp to the write_stamp it makes the
two equal again, which means that the write_stamp can be considered valid
as the last timestamp written to the ring buffer. But this is not
necessarily true. The event that interrupted the event could have been
interrupted in a way that it was interrupted as well, and can end up
leaving with an invalid write_stamp. But if this happens and returns to
this context that uses the before_stamp to update the write_stamp again,
it can possibly incorrectly make it valid, causing later events to have in
correct time stamps.
As it is OK to leave this function with an invalid write_stamp (one that
doesn't match the before_stamp), there's no reason to try to make it valid
again in this case. If this race happens, then just leave with the invalid
write_stamp and the next event to come along will just add a absolute
timestamp and validate everything again.
Bonus points: This gets rid of another cmpxchg64!
Link: https://lore.kernel.org/linux-trace-kernel/20231214222921.193037a7@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Fixes: a389d86f7fd09 ("ring-buffer: Have nested events still record running time stamp")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Fix the extraction of num_csrows and num_chans. The extraction of the
num_rows is wrong. Instead of extracting using the FIELD_GET it is
calling FIELD_PREP.
The issue was masked as the default design has the rows as 0.
Fixes: 6f15b178cd63 ("EDAC/versal: Add a Xilinx Versal memory controller driver")
Closes: https://lore.kernel.org/all/60ca157e-6eff-d12c-9dc0-8aeab125edda@linux-m68k.org/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231215053352.8740-1-shubhrajyoti.datta@amd.com
|
|
When lockdep is enabled, the for_each_sibling_event(sibling, event)
macro checks that event->ctx->mutex is held. When creating a new group
leader event, we call perf_event_validate_size() on a partially
initialized event where event->ctx is NULL, and so when
for_each_sibling_event() attempts to check event->ctx->mutex, we get a
splat, as reported by Lucas De Marchi:
WARNING: CPU: 8 PID: 1471 at kernel/events/core.c:1950 __do_sys_perf_event_open+0xf37/0x1080
This only happens for a new event which is its own group_leader, and in
this case there cannot be any sibling events. Thus it's safe to skip the
check for siblings, which avoids having to make invasive and ugly
changes to for_each_sibling_event().
Avoid the splat by bailing out early when the new event is its own
group_leader.
Fixes: 382c27f4ed28f803 ("perf: Fix perf_event_validate_size()")
Closes: https://lore.kernel.org/lkml/20231214000620.3081018-1-lucas.demarchi@intel.com/
Closes: https://lore.kernel.org/lkml/ZXpm6gQ%2Fd59jGsuW@xpf.sh.intel.com/
Reported-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231215112450.3972309-1-mark.rutland@arm.com
|
|
The following kmemleaks were detected when removing the cxl module
stack:
unreferenced object 0xffff88822616b800 (size 1024):
...
backtrace:
[<00000000bedc6f83>] kmalloc_trace+0x26/0x90
[<00000000448d1afc>] devm_cxl_pmu_add+0x3a/0x110 [cxl_core]
[<00000000ca3bfe16>] 0xffffffffa105213b
[<00000000ba7f78dc>] local_pci_probe+0x41/0x90
[<000000005bb027ac>] pci_device_probe+0xb0/0x1c0
...
unreferenced object 0xffff8882260abcc0 (size 16):
...
hex dump (first 16 bytes):
70 6d 75 5f 6d 65 6d 30 2e 30 00 26 82 88 ff ff pmu_mem0.0.&....
backtrace:
...
[<00000000152b5e98>] dev_set_name+0x43/0x50
[<00000000c228798b>] devm_cxl_pmu_add+0x102/0x110 [cxl_core]
[<00000000ca3bfe16>] 0xffffffffa105213b
[<00000000ba7f78dc>] local_pci_probe+0x41/0x90
[<000000005bb027ac>] pci_device_probe+0xb0/0x1c0
...
unreferenced object 0xffff8882272af200 (size 256):
...
backtrace:
[<00000000bedc6f83>] kmalloc_trace+0x26/0x90
[<00000000a14d1813>] device_add+0x4ea/0x890
[<00000000a3f07b47>] devm_cxl_pmu_add+0xbe/0x110 [cxl_core]
[<00000000ca3bfe16>] 0xffffffffa105213b
[<00000000ba7f78dc>] local_pci_probe+0x41/0x90
[<000000005bb027ac>] pci_device_probe+0xb0/0x1c0
...
devm_cxl_pmu_add() correctly registers a device remove function but it
only calls device_del() which is only part of device unregistration.
Properly call device_unregister() to free up the memory associated with
the device.
Fixes: 1ad3f701c399 ("cxl/pci: Find and register CXL PMU devices")
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231016-pmu-unregister-fix-v1-1-1e2eb2fa3c69@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Turns out we made a silly mistake when coming up with OR inheritance on
nouveau. On pre-DCB 4.1, iors are statically routed to output paths via the
DCB. On later generations iors are only routed to an output path if they're
actually being used. Unfortunately, it appears with NVIF_OUTP_INHERIT_V0 we
make the mistake of assuming the later is true on all generations, which is
currently leading us to return bogus ior -> head assignments through nvif,
which causes WARN_ON().
So - fix this by verifying that we actually know that there's a head
assigned to an ior before allowing it to be inherited through nvif. This
-should- hopefully fix the WARN_ON on GT218 reported by Borislav.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Reported-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214004359.1028109-1-lyude@redhat.com
|
|
Commit 12c9b05da918 ("drm/nouveau/imem: support allocations not
preserved across suspend") uses container_of() to cast from struct
nvkm_memory to struct nvkm_instobj, assuming that all instance objects
are derived from struct nvkm_instobj. For the gk20a family that's not
the case and they are derived from struct nvkm_memory instead. This
causes some subtle data corruption (nvkm_instobj.preserve ends up
mapping to gk20a_instobj.vaddr) that causes a NULL pointer dereference
in gk20a_instobj_acquire_iommu() (and possibly elsewhere) and also
prevents suspend/resume from working.
Fix this by making struct gk20a_instobj derive from struct nvkm_instobj
instead.
Fixes: 12c9b05da918 ("drm/nouveau/imem: support allocations not preserved across suspend")
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208104653.1917055-1-thierry.reding@gmail.com
|
|
In 8e9fad0e70b7 "io_uring: Add io_uring command support for sockets"
you've got an include of asm-generic/ioctls.h done in io_uring/uring_cmd.c.
That had been done for the sake of this chunk -
+ ret = prot->ioctl(sk, SIOCINQ, &arg);
+ if (ret)
+ return ret;
+ return arg;
+ case SOCKET_URING_OP_SIOCOUTQ:
+ ret = prot->ioctl(sk, SIOCOUTQ, &arg);
SIOC{IN,OUT}Q are defined to symbols (FIONREAD and TIOCOUTQ) that come from
ioctls.h, all right, but the values vary by the architecture.
FIONREAD is
0x467F on mips
0x4004667F on alpha, powerpc and sparc
0x8004667F on sh and xtensa
0x541B everywhere else
TIOCOUTQ is
0x7472 on mips
0x40047473 on alpha, powerpc and sparc
0x80047473 on sh and xtensa
0x5411 everywhere else
->ioctl() expects the same values it would've gotten from userland; all
places where we compare with SIOC{IN,OUT}Q are using asm/ioctls.h, so
they pick the correct values. io_uring_cmd_sock(), OTOH, ends up
passing the default ones.
Fixes: 8e9fad0e70b7 ("io_uring: Add io_uring command support for sockets")
Cc: <stable@vger.kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20231214213408.GT1674809@ZenIV
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Driver has a logic leak in ring data allocation/free,
where double free may happen in aq_ring_free if system is under
stress and driver init/deinit is happening.
The probability is higher to get this during suspend/resume cycle.
Verification was done simulating same conditions with
stress -m 2000 --vm-bytes 20M --vm-hang 10 --backoff 1000
while true; do sudo ifconfig enp1s0 down; sudo ifconfig enp1s0 up; done
Fixed by explicitly clearing pointers to NULL on deallocation
Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/netdev/CAHk-=wiZZi7FcvqVSUirHBjx0bBUZ4dFrMDVLc3+3HCrtq0rBA@mail.gmail.com/
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20231213094044.22988-1-irusskikh@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Calling component_add starts loading the firmware, the callback function
writes the program to the amplifiers. If the module resets the
amplifiers after component_add, it happens that one of the amplifiers
does not work because the reset and program writing are interleaving.
Call tas2781_reset before component_add to ensure reliable
initialization.
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/4d23bf58558e23ee8097de01f70f1eb8d9de2d15.1702511246.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If the module can load the RCA but not the firmware binary, it will call
the cleanup functions. Then unloading the module causes general
protection fault due to double free.
Do not call the cleanup functions in tasdev_fw_ready.
general protection fault, probably for non-canonical address
0x6f2b8a2bff4c8fec: 0000 [#1] PREEMPT SMP NOPTI
Call Trace:
<TASK>
? die_addr+0x36/0x90
? exc_general_protection+0x1c5/0x430
? asm_exc_general_protection+0x26/0x30
? tasdevice_config_info_remove+0x6d/0xd0 [snd_soc_tas2781_fmwlib]
tas2781_hda_unbind+0xaa/0x100 [snd_hda_scodec_tas2781_i2c]
component_unbind+0x2e/0x50
component_unbind_all+0x92/0xa0
component_del+0xa8/0x140
tas2781_hda_remove.isra.0+0x32/0x60 [snd_hda_scodec_tas2781_i2c]
i2c_device_remove+0x26/0xb0
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/1a0885c424bb21172702d254655882b59ef6477a.1702510018.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Because atalk_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with atalk_recvmsg().
A use-after-free for skb occurs with the following flow.
```
atalk_ioctl() -> skb_peek()
atalk_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
```
Add sk->sk_receive_queue.lock to atalk_ioctl() to fix this issue.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231213041056.GA519680@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Many hardware configurations have the MDIO bus disabled, and are instead
using some other MDIO bus to talk to the MAC's phy.
of_mdiobus_register() returns -ENODEV in this case. Let's handle it
gracefully instead of failing to probe the MAC.
Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20231212-b4-stmmac-handle-mdio-enodev-v2-1-600171acf79f@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In 10M SGMII mode all the packets are being dropped due to wrong Rx clock.
SGMII 10MBPS mode needs RX clock divider programmed to avoid drops in Rx.
Update configure SGMII function with Rx clk divider programming.
Fixes: 463120c31c58 ("net: stmmac: dwmac-qcom-ethqos: add support for SGMII")
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Sneh Shah <quic_snehshah@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20231212092208.22393-1-quic_snehshah@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
KASAN report following issue. The root cause is when opening 'hist'
file of an instance and accessing 'trace_event_file' in hist_show(),
but 'trace_event_file' has been freed due to the instance being removed.
'hist_debug' file has the same problem. To fix it, call
tracing_{open,release}_file_tr() in file_operations callback to have
the ref count and avoid 'trace_event_file' being freed.
BUG: KASAN: slab-use-after-free in hist_show+0x11e0/0x1278
Read of size 8 at addr ffff242541e336b8 by task head/190
CPU: 4 PID: 190 Comm: head Not tainted 6.7.0-rc5-g26aff849438c #133
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x98/0xf8
show_stack+0x1c/0x30
dump_stack_lvl+0x44/0x58
print_report+0xf0/0x5a0
kasan_report+0x80/0xc0
__asan_report_load8_noabort+0x1c/0x28
hist_show+0x11e0/0x1278
seq_read_iter+0x344/0xd78
seq_read+0x128/0x1c0
vfs_read+0x198/0x6c8
ksys_read+0xf4/0x1e0
__arm64_sys_read+0x70/0xa8
invoke_syscall+0x70/0x260
el0_svc_common.constprop.0+0xb0/0x280
do_el0_svc+0x44/0x60
el0_svc+0x34/0x68
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x168/0x170
Allocated by task 188:
kasan_save_stack+0x28/0x50
kasan_set_track+0x28/0x38
kasan_save_alloc_info+0x20/0x30
__kasan_slab_alloc+0x6c/0x80
kmem_cache_alloc+0x15c/0x4a8
trace_create_new_event+0x84/0x348
__trace_add_new_event+0x18/0x88
event_trace_add_tracer+0xc4/0x1a0
trace_array_create_dir+0x6c/0x100
trace_array_create+0x2e8/0x568
instance_mkdir+0x48/0x80
tracefs_syscall_mkdir+0x90/0xe8
vfs_mkdir+0x3c4/0x610
do_mkdirat+0x144/0x200
__arm64_sys_mkdirat+0x8c/0xc0
invoke_syscall+0x70/0x260
el0_svc_common.constprop.0+0xb0/0x280
do_el0_svc+0x44/0x60
el0_svc+0x34/0x68
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x168/0x170
Freed by task 191:
kasan_save_stack+0x28/0x50
kasan_set_track+0x28/0x38
kasan_save_free_info+0x34/0x58
__kasan_slab_free+0xe4/0x158
kmem_cache_free+0x19c/0x508
event_file_put+0xa0/0x120
remove_event_file_dir+0x180/0x320
event_trace_del_tracer+0xb0/0x180
__remove_instance+0x224/0x508
instance_rmdir+0x44/0x78
tracefs_syscall_rmdir+0xbc/0x140
vfs_rmdir+0x1cc/0x4c8
do_rmdir+0x220/0x2b8
__arm64_sys_unlinkat+0xc0/0x100
invoke_syscall+0x70/0x260
el0_svc_common.constprop.0+0xb0/0x280
do_el0_svc+0x44/0x60
el0_svc+0x34/0x68
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x168/0x170
Link: https://lore.kernel.org/linux-trace-kernel/20231214012153.676155-1-zhengyejian1@huawei.com
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Starting with commit 4e51bf44a03a ("net: bridge: move the switchdev
object replay helpers to "push" mode") the switchdev_bridge_port_offload()
helper was extended with the intention to provide switchdev drivers easy
access to object addition and deletion replays. This works by calling
the replay helpers with non-NULL notifier blocks.
In the same commit, the dpaa2-switch driver was updated so that it
passes valid notifier blocks to the helper. At that moment, no
regression was identified through testing.
In the meantime, the blamed commit changed the behavior in terms of
which ports get hit by the replay. Before this commit, only the initial
port which identified itself as offloaded through
switchdev_bridge_port_offload() got a replay of all port objects and
FDBs. After this, the newly joining port will trigger a replay of
objects on all bridge ports and on the bridge itself.
This behavior leads to errors in dpaa2_switch_port_vlans_add() when a
VLAN gets installed on the same interface multiple times.
The intended mechanism to address this is to pass a non-NULL ctx to the
switchdev_bridge_port_offload() helper and then check it against the
port's private structure. But since the driver does not have any use for
the replayed port objects and FDBs until it gains support for LAG
offload, it's better to fix the issue by reverting the dpaa2-switch
driver to not ask for replay. The pointers will be added back when we
are prepared to ignore replays on unrelated ports.
Fixes: b28d580e2939 ("net: bridge: switchdev: replay all VLAN groups")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20231212164326.2753457-3-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The size of the DMA unmap was wrongly put as a sizeof of a pointer.
Change the value of the DMA unmap to be the actual macro used for the
allocation and the DMA map.
Fixes: 1110318d83e8 ("dpaa2-switch: add tc flower hardware offload on ingress traffic")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20231212164326.2753457-2-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Once again syzbot is able to crash the kernel in skb_segment() [1]
GSO_BY_FRAGS is a forbidden value, but unfortunately the following
computation in skb_segment() can reach it quite easily :
mss = mss * partial_segs;
65535 = 3 * 5 * 17 * 257, so many initial values of mss can lead to
a bad final result.
Make sure to limit segmentation so that the new mss value is smaller
than GSO_BY_FRAGS.
[1]
general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 1 PID: 5079 Comm: syz-executor993 Not tainted 6.7.0-rc4-syzkaller-00141-g1ae4cd3cbdd0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551
Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00
RSP: 0018:ffffc900043473d0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597
RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070
RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0
R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046
FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
udp6_ufo_fragment+0xa0e/0xd00 net/ipv6/udp_offload.c:109
ipv6_gso_segment+0x534/0x17e0 net/ipv6/ip6_offload.c:120
skb_mac_gso_segment+0x290/0x610 net/core/gso.c:53
__skb_gso_segment+0x339/0x710 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x36c/0xeb0 net/core/dev.c:3626
__dev_queue_xmit+0x6f3/0x3d60 net/core/dev.c:4338
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24c6/0x5220 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7f8692032aa9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 d1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff8d685418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8692032aa9
RDX: 0000000000010048 RSI: 00000000200000c0 RDI: 0000000000000003
RBP: 00000000000f4240 R08: 0000000020000540 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff8d685480
R13: 0000000000000001 R14: 00007fff8d685480 R15: 0000000000000003
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551
Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00
RSP: 0018:ffffc900043473d0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597
RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070
RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0
R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046
FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231212164621.4131800-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to do signed arithmetic if we expect condition
`if (bytes < 0)` to be possible
Found by Linux Verification Center (linuxtesting.org) with SVACE
Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231211162317.4116625-1-kniv@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This can only happen when there is a reference counting bug.
v2: fix typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When freeing PD/PT with shadows it can happen that the shadow
destruction races with detaching the PD/PT from the VM causing a NULL
pointer dereference in the invalidation code.
Fix this by detaching the the PD/PT from the VM first and then
freeing the shadow instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: https://gitlab.freedesktop.org/drm/amd/-/issues/2867
Cc: <stable@vger.kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
commit 751e293f2c99 ("drm/amd: Move microcode init from sw_init to
early_init for SDMA v2.4") made a fateful mistake in
`adev->sdma.num_instances` wasn't declared when sdma_v2_4_init_microcode()
was run. This caused probing to fail.
Move the declaration to right before sdma_v2_4_init_microcode().
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3043
Fixes: 751e293f2c99 ("drm/amd: Move microcode init from sw_init to early_init for SDMA v2.4")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add begin/end_use ring callbacks to disallow GFXOFF when
SDMA work is submitted and allow it again afterward.
This should avoid corner cases where GFXOFF is erroneously
entered when SDMA is still active. For now just allow/disallow
GFXOFF in the begin and end helpers until we root cause the
issue. This should not impact power as SDMA usage is pretty
minimal and GFXOSS should not be active when SDMA is active
anyway, this just makes it explicit.
v2: move everything into sdma5.2 code. No reason for this
to be generic at this point.
v3: Add comments in new code
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2220
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> (v1)
Tested-by: Mario Limonciello <mario.limonciello@amd.com> (v1)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.15+
|
|
There are some wrong return values check in sign-file when call OpenSSL
API. The ERR() check cond is wrong because of the program only check the
return value is < 0 which ignored the return val is 0. For example:
1. CMS_final() return 1 for success or 0 for failure.
2. i2d_CMS_bio_stream() returns 1 for success or 0 for failure.
3. i2d_TYPEbio() return 1 for success and 0 for failure.
4. BIO_free() return 1 for success and 0 for failure.
Link: https://www.openssl.org/docs/manmaster/man3/
Fixes: e5a2e3c84782 ("scripts/sign-file.c: Add support for signing with a raw signature")
Signed-off-by: Yusong Gao <a869920004@gmail.com>
Reviewed-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20231213024405.624692-1-a869920004@gmail.com/ # v5
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit f3f32a356c0d2379d4431364e74f101f8f075ce3.
Paolo reports that the change disables autocorking even after
the userspace sets TCP_CORK.
Fixes: f3f32a356c0d ("tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set")
Link: https://lore.kernel.org/r/0d30d5a41d3ac990573016308aaeacb40a9dc79f.camel@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ltk050h3148w variant expects the horizontal component lane byte clock
cycle(lbcc) to be calculated using lane_mbps (burst mode) instead of the
pixel clock.
Using the pixel clock rate by default for this calculation was introduced
in commit ac87d23694f4 ("drm/bridge: synopsys: dw-mipi-dsi: Use pixel clock
rate to calculate lbcc") and starting from commit 93e82bb4de01
("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode")
only panels that support burst mode can keep using the lane_mbps. So add
MIPI_DSI_MODE_VIDEO_BURST as part of the mode_flags for the dsi host.
Fixes: 93e82bb4de01 ("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode")
Signed-off-by: Farouk Bouabid <farouk.bouabid@theobroma-systems.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213145045.41020-1-farouk.bouabid@theobroma-systems.com
|
|
filemap_lock_folio() returns ERR_PTR(-ENOENT) if the thing is not
in cache - not NULL like find_lock_page() used to.
Fixes: 5fb7bd50b351 "ufs: add ufs_get_locked_folio and ufs_put_locked_folio"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
There are a few quirks around using lazy wake for poll unconditionally,
and one of them is related the EPOLLEXCLUSIVE. Those may trigger
exclusive wakeups, which wake a limited number of entries in the wait
queue. If that wake number is less than the number of entries someone is
waiting for (and that someone is also using DEFER_TASKRUN), then we can
get stuck waiting for more entries while we should be processing the ones
we already got.
If we're doing exclusive poll waits, flag the request as not being
compatible with lazy wakeups.
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Fixes: 6ce4a93dbb5b ("io_uring/poll: use IOU_F_TWQ_LAZY_WAKE for wakeups")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Aneesh and Naveen are helping out with some aspects of upstream
maintenance, add them as reviewers.
Acked-by: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Acked-by: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231205051105.736470-1-mpe@ellerman.id.au
|
|
The hypervisor returns migration failure if all VAS windows are not
closed. During pre-migration stage, vas_migration_handler() sets
migration_in_progress flag and closes all windows from the list.
The allocate VAS window routine checks the migration flag, setup
the window and then add it to the list. So there is possibility of
the migration handler missing the window that is still in the
process of setup.
t1: Allocate and open VAS t2: Migration event
window
lock vas_pseries_mutex
If migration_in_progress set
unlock vas_pseries_mutex
return
open window HCALL
unlock vas_pseries_mutex
Modify window HCALL lock vas_pseries_mutex
setup window migration_in_progress=true
Closes all windows from the list
// May miss windows that are
// not in the list
unlock vas_pseries_mutex
lock vas_pseries_mutex return
if nr_closed_windows == 0
// No DLPAR CPU or migration
add window to the list
// Window will be added to the
// list after the setup is completed
unlock vas_pseries_mutex
return
unlock vas_pseries_mutex
Close VAS window
// due to DLPAR CPU or migration
return -EBUSY
This patch resolves the issue with the following steps:
- Set the migration_in_progress flag without holding mutex.
- Introduce nr_open_wins_progress counter in VAS capabilities
struct
- This counter tracks the number of open windows are still in
progress
- The allocate setup window thread closes windows if the migration
is set and decrements nr_open_window_progress counter
- The migration handler waits for no in-progress open windows.
The code flow with the fix is as follows:
t1: Allocate and open VAS t2: Migration event
window
lock vas_pseries_mutex
If migration_in_progress set
unlock vas_pseries_mutex
return
open window HCALL
nr_open_wins_progress++
// Window opened, but not
// added to the list yet
unlock vas_pseries_mutex
Modify window HCALL migration_in_progress=true
setup window lock vas_pseries_mutex
Closes all windows from the list
While nr_open_wins_progress {
unlock vas_pseries_mutex
lock vas_pseries_mutex sleep
if nr_closed_windows == 0 // Wait if any open window in
or migration is not started // progress. The open window
// No DLPAR CPU or migration // thread closes the window without
add window to the list // adding to the list and return if
nr_open_wins_progress-- // the migration is in progress.
unlock vas_pseries_mutex
return
Close VAS window
nr_open_wins_progress--
unlock vas_pseries_mutex
return -EBUSY lock vas_pseries_mutex
}
unlock vas_pseries_mutex
return
Fixes: 37e6764895ef ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231125235104.3405008-1-haren@linux.ibm.com
|
|
Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS,
so checking for some other compatible does not make sense. It cannot be
bound to unsupported platform.
Drop useless, incorrect (space in between) and undocumented compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS,
so checking for some other compatible does not make sense. It cannot be
bound to unsupported platform.
Drop useless, incorrect (space in between) and undocumented compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Generic code will use mdio. If it is not initialized before use,
the kernel will Oops.
Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Originally was in the panel-simple, but belongs to panel-simple-dsi.
See arch/arm/boot/dts/nvidia/tegra114-roth.dts for more details.
Resolves the following warning:
```
arch/arm/boot/dts/tegra114-roth.dt.yaml: panel@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/display/panel/panel-simple.yaml
```
Fixes: 310abcea76e9 ("dt-bindings: display: convert simple lg panels to DT Schema")
Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20231212200934.99262-1-david@ixit.cz
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231212200934.99262-1-david@ixit.cz
|
|
Based on the tcp man page, if TCP_NODELAY is set, it disables Nagle's algorithm
and packets are sent as soon as possible. However in the `tcp_push` function
where autocorking is evaluated the `nonagle` value set by TCP_NODELAY is not
considered which can trigger unexpected corking of packets and induce delays.
For example, if two packets are generated as part of a server's reply, if the
first one is not transmitted on the wire quickly enough, the second packet can
trigger the autocorking in `tcp_push` and be delayed instead of sent as soon as
possible. It will either wait for additional packets to be coalesced or an ACK
from the client before transmitting the corked packet. This can interact badly
if the receiver has tcp delayed acks enabled, introducing 40ms extra delay in
completion times. It is not always possible to control who has delayed acks
set, but it is possible to adjust when and how autocorking is triggered.
Patch prevents autocorking if the TCP_NODELAY flag is set on the socket.
Patch has been tested using an AWS c7g.2xlarge instance with Ubuntu 22.04 and
Apache Tomcat 9.0.83 running the basic servlet below:
import java.io.IOException;
import java.io.OutputStreamWriter;
import java.io.PrintWriter;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class HelloWorldServlet extends HttpServlet {
@Override
protected void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html;charset=utf-8");
OutputStreamWriter osw = new OutputStreamWriter(response.getOutputStream(),"UTF-8");
String s = "a".repeat(3096);
osw.write(s,0,s.length());
osw.flush();
}
}
Load was applied using wrk2 (https://github.com/kinvolk/wrk2) from an AWS
c6i.8xlarge instance. With the current auto-corking behavior and TCP_NODELAY
set an additional 40ms latency from P99.99+ values are observed. With the
patch applied we see no occurrences of 40ms latencies. The patch has also been
tested with iperf and uperf benchmarks and no regression was observed.
# No patch with tcp_autocorking=1 and TCP_NODELAY set on all sockets
./wrk -t32 -c128 -d40s --latency -R10000 http://172.31.49.177:8080/hello/hello'
...
50.000% 0.91ms
75.000% 1.12ms
90.000% 1.46ms
99.000% 1.73ms
99.900% 1.96ms
99.990% 43.62ms <<< 40+ ms extra latency
99.999% 48.32ms
100.000% 49.34ms
# With patch
./wrk -t32 -c128 -d40s --latency -R10000 http://172.31.49.177:8080/hello/hello'
...
50.000% 0.89ms
75.000% 1.13ms
90.000% 1.44ms
99.000% 1.67ms
99.900% 1.78ms
99.990% 2.27ms <<< no 40+ ms extra latency
99.999% 3.71ms
100.000% 4.57ms
Fixes: f54b311142a9 ("tcp: auto corking")
Signed-off-by: Salvatore Dipietro <dipiets@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Dave Jiang
Linus Torvalds
Josef Bacik
Jens Axboe
Bjorn Helgaas
Steven Rostedt (Google)
Mathieu Desnoyers
Shubhrajyoti Datta
Mark Rutland
Ira Weiny
Lyude Paul
Thierry Reding
Al Viro
Igor Russkikh
Gergo Koteles
Hyunwoo Kim
Andrew Halaney
Sneh Shah
Zheng Yejian
Ioana Ciornei
Eric Dumazet
Nikolay Kuratov
Christian König
Mario Limonciello
Alex Deucher
Yusong Gao
Jakub Kicinski
Farouk Bouabid
Michael Ellerman
Haren Myneni
Krzysztof Kozlowski
Yanteng Si
David Heidelberg
Salvatore Dipietro