| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add the 'mediatek,ufs-disable-mcq' property to the UFS device-tree
bindings. This flag corresponds to the UFS_MTK_CAP_DISABLE_MCQ host
capability recently introduced in the UFS host driver, allowing it to
disable the Multiple Circular Queue (MCQ) feature when present. The
binding schema has also been updated to resolve DTBS check errors.
Cc: stable@vger.kernel.org
Fixes: 46bd3e31d74b ("scsi: ufs: mediatek: Add UFS_MTK_CAP_DISABLE_MCQ")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20250722085721.2062657-2-macpaul.lin@mediatek.com
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add "mediatek,mt8195-ufshci" to the of_device_id table to enable support
for MediaTek MT8195/MT8395 UFS host controller. This matches the device
node entry in the MT8195/MT8395 device tree and allows proper driver
binding.
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20250722085721.2062657-1-macpaul.lin@mediatek.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Now that UFS core enables the UIC Completion interrupt only when needed,
Intel MTL driver no longer needs to control the interrupt itself. So
remove the associated code.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250723165856.145750-9-adrian.hunter@intel.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Write a new value to the interrupt enable register only if it is
different from the old value, thereby saving a register write operation.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250723165856.145750-8-adrian.hunter@intel.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently the UIC Completion interrupt is left enabled except for when
issuing link hibernate commands, in which case the interrupt is disabled
and then re-enabled.
Instead, set and clear the interrupt enable bit as needed.
That is slightly simpler and less error prone, but also avoids side
effects of accessing the interrupt enable register after entering link
hibernation. Specifically, for some host controllers like Intel MTL,
doing so disrupts the link state transition.
Note also, the interrupt register is not read back anymore after it is
updated. No other code does that, so it is assumed to be no longer
necessary if it ever was.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250723165856.145750-7-adrian.hunter@intel.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Make ufshcd_send_bsg_uic_cmd() call ufshcd_send_uic_cmd() instead of
duplicating its code.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250723165856.145750-6-adrian.hunter@intel.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move ufshcd_enable_intr() and ufshcd_disable_intr() so they can be called
in subsequent patches without forward declarations.
No functional change.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250723165856.145750-5-adrian.hunter@intel.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
->late_init() was introduced to allow the default values for rpm_lvl and
spm_lvl to be set. Since commit bb9850704c04 ("scsi: ufs: core: Honor
runtime/system PM levels if set by host controller drivers") and commit
fe06b7c07f3f ("scsi: ufs: core: Set default runtime/system PM levels
before ufshcd_hba_init()"), those default values can be set in the
->init() variant call back.
Move the setting of default values for rpm_lvl and spm_lvl to ->init()
and remove ->late_init().
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250723165856.145750-4-adrian.hunter@intel.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Intel MTL-like host controllers support auto-hibernate. Using
auto-hibernate with manual (driver initiated) hibernate produces more
complex operation. For example, the host controller will have to exit
auto-hibernate simply to allow the driver to enter hibernate state
manually. That is not recommended.
The default rpm_lvl and spm_lvl is 3, which includes manual hibernate.
Change the default values to 2, which does not.
Note, to be simpler to backport to stable kernels, utilize the UFS PCI
driver's ->late_init() call back. Recent commits have made it possible
to set up a controller-specific default in the regular ->init() call
back, but not all stable kernels have those changes.
Fixes: 4049f7acef3e ("scsi: ufs: ufs-pci: Add support for Intel MTL")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250723165856.145750-3-adrian.hunter@intel.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
UFSHCD core disables the UIC completion interrupt when issuing UIC
hibernation commands, and re-enables it afterwards if it was enabled to
start with, refer ufshcd_uic_pwr_ctrl(). For Intel MTL-like host
controllers, accessing the register to re-enable the interrupt disrupts
the state transition.
Use hibern8_notify variant operation to disable the interrupt during the
entire hibernation, thereby preventing the disruption.
Fixes: 4049f7acef3e ("scsi: ufs: ufs-pci: Add support for Intel MTL")
Cc: stable@vger.kernel.org
Signed-off-by: Archana Patni <archana.patni@intel.com>
Link: https://lore.kernel.org/r/20250723165856.145750-2-adrian.hunter@intel.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for scaling the FDE (AES) clock to achieve higher
performance, particularly for HS-G5:
1. Parse DTS settings for FDE min/max mux.
2. Scale up the FDE clock when required for enhanced performance.
These changes ensure that the FDE clock can be dynamically adjusted based
on performance needs, leveraging DTS configurations.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20250722030841.1998783-10-peter.wang@mediatek.com
Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for clock scaling with Vcore binding:
1. Parse the DTS setting for Vcore voltage.
2. Set the Vcore voltage to the DTS-specified value before scaling up.
3. Reset the Vcore voltage to the default setting after scaling down.
These changes ensure that the Vcore voltage is appropriately managed
during clock scaling operations to maintain system stability and
performance.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20250722030841.1998783-9-peter.wang@mediatek.com
Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Introduce a clock scaling readiness query function to streamline the
process of checking clock scaling parameters. This function simplifies
the code by encapsulating the logic for determining if clock scaling is
ready.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20250722030841.1998783-8-peter.wang@mediatek.com
Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Introduce a function for version control to distinguish between new and
old platforms. Update the handling of hardware IP versions, ensuring
correct version comparisons by adjusting the version format for specific
projects.
Signed-off-by: Alice Chao <alice.chao@mediatek.com>
Link: https://lore.kernel.org/r/20250722030841.1998783-7-peter.wang@mediatek.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Set the IRQ affinity for MCQ mode to improve performance. Specifically,
it migrates the IRQ from CPU0 to CPU3 to enhance IRQ handling efficiency.
Setting IRQ affinity directly from the kernel allows the configuration to
take effect earlier, and provides greater security and consistency,
especially important for systems with strict performanceor real-time
requirements.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20250722030841.1998783-6-peter.wang@mediatek.com
Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Introduce a mechanism to handle broken RTC by checking the DTS
setting. The configuration is specifically required for legacy platform.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20250722030841.1998783-5-peter.wang@mediatek.com
Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update the timeout policy for ref-clk control.
- If a clock-on operation times out, it is assumed that the clock is
off. The system will notify TFA to perform clock-off settings.
- If a clock-off operation times out, it is assumed that the clock will
eventually turn off. The 'ref_clk_enabled' flag is set directly.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20250722030841.1998783-4-peter.wang@mediatek.com
Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
On MT6989 and later platforms, control of DDR_EN has been switched from
SPM to EMI. To prevent abnormal access to DRAM, it is necessary to wait
for 'ddren_ack' or assert 'ddren_urgent' after sending 'ddren_req'.
Introduce the DDR_EN configuration in the UFS initialization flow,
utilizing the assertion of 'ddren_urgent' to maintain performance.
Signed-off-by: Naomi Chu <naomi.chu@mediatek.com>
Link: https://lore.kernel.org/r/20250722030841.1998783-3-peter.wang@mediatek.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Simplify the conversion from unsigned int to boolean by removing explicit
conversions and parentheses, relying on implicit conversion instead. This
change ensures consistency with other usages in ufs-mediatek.c and
streamlines the code.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20250722030841.1998783-2-peter.wang@mediatek.com
Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove hard-coded strings by using the str_true_false() helper function.
Signed-off-by: Liu Song <liu.song13@zte.com.cn>
Link: https://lore.kernel.org/r/20250721200138431dOU9KyajGyGi5339ma26p@zte.com.cn
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
sas_user_scan() did not fully process wildcard channel scans
(SCAN_WILD_CARD) when a transport-specific user_scan() callback was
present. Only channel 0 would be scanned via user_scan(), while the
remaining channels were skipped, potentially missing devices.
user_scan() invokes updated sas_user_scan() for channel 0, and if
successful, iteratively scans remaining channels (1 to
shost->max_channel) via scsi_scan_host_selected(). This ensures complete
wildcard scanning without affecting transport-specific scanning behavior.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250624061649.17990-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix target_parse_pr_out_transport_id() to return a string representing
the transport ID in a human-readable format (e.g., naa.xxxxxxxx...) for
various SCSI protocol types (SAS, FCP, SRP, SBP).
Previously, the function returned a pointer to the raw binary buffer,
which was incorrectly compared against human-readable strings, causing
comparisons to fail. Now, the function writes a properly formatted
string into a buffer provided by the caller. The output format depends
on the transport protocol:
* SAS: 64-bit identifier, "naa." prefix.
* FCP: 64-bit identifier, colon separated values.
* SBP: 64-bit identifier, no prefix.
* SRP: 128-bit identifier, "0x" prefix.
* iSCSI: IQN string.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Link: https://lore.kernel.org/r/20250714133738.11054-1-mlombard@redhat.com
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
liyihang9@huawei.com no longer works. So update information for hisi_sas.
Signed-off-by: Yihang Li <liyihang9@h-partners.com>
Link: https://lore.kernel.org/r/20250702012423.1947238-1-liyihang9@h-partners.com
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We might be running a local application that also interacts with the
backing device. In this setup we have some clustering type of software
that manages the ownwer of it, so we don't want the kernel to restrict
us. This patch allows the user to control if the driver gets exclusive
access.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20250721185145.20913-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If the h8 exit fails during runtime resume process, the runtime thread
enters runtime suspend immediately and the error handler operates at the
same time. It becomes stuck and cannot be recovered through the error
handler. To fix this, use link recovery instead of the error handler.
Fixes: 4db7a2360597 ("scsi: ufs: Fix concurrency of error handler and other error recovery paths")
Signed-off-by: Seunghui Lee <sh043.lee@samsung.com>
Link: https://lore.kernel.org/r/20250717081213.6811-1-sh043.lee@samsung.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This reverts commit c577ab7ba5f3bf9062db8a58b6e89d4fe370447e.
The invocation of iscsi_put_conn() in iscsi_iter_destory_conn_fn() is
used to free the initial reference counter of iscsi_cls_conn. For
non-qla4xxx cases, the ->destroy_conn() callback (e.g.,
iscsi_conn_teardown) will call iscsi_remove_conn() and iscsi_put_conn()
to remove the connection from the children list of session and free the
connection at last. However for qla4xxx, it is not the case. The
->destroy_conn() callback of qla4xxx will keep the connection in the
session conn_list and doesn't use iscsi_put_conn() to free the initial
reference counter. Therefore, it seems necessary to keep the
iscsi_put_conn() in the iscsi_iter_destroy_conn_fn(), otherwise, there
will be memory leak problem.
Link: https://lore.kernel.org/all/88334658-072b-4b90-a949-9c74ef93cfd1@huawei.com/
Fixes: c577ab7ba5f3 ("scsi: iscsi: Fix HW conn removal use after free")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Link: https://lore.kernel.org/r/20250715073926.3529456-1-lilingfeng3@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When PCI_IRQ_AFFINITY is set for calling pci_alloc_irq_vectors(), it
means interrupts are spread around the available CPUs. It also means that
the interrupts become managed, which means that an interrupt is shutdown
when all the CPUs in the interrupt affinity mask go offline.
Using managed interrupts in this way means that we should ensure that
completions should not occur on HW queues where the associated interrupt
is shutdown. This is typically achieved by ensuring only CPUs which are
online can generate IO completion traffic to the HW queue which they are
mapped to (so that they can also serve completion interrupts for that HW
queue).
The problem in the driver is that a CPU can generate completions to a HW
queue whose interrupt may be shutdown, as the CPUs in the HW queue
interrupt affinity mask may be offline. This can cause IOs to never
complete and hang the system. The driver maintains its own CPU <-> HW
queue mapping for submissions, see aac_fib_vector_assign(), but this does
not reflect the CPU <-> HW queue interrupt affinity mapping.
Commit 9dc704dcc09e ("scsi: aacraid: Reply queue mapping to CPUs based on
IRQ affinity") tried to remedy this issue may mapping CPUs properly to HW
queue interrupts. However this was later reverted in commit c5becf57dd56
("Revert "scsi: aacraid: Reply queue mapping to CPUs based on IRQ
affinity") - it seems that there were other reports of hangs. I guess
that this was due to some implementation issue in the original commit or
maybe a HW issue.
Fix the very original hang by just not using managed interrupts by not
setting PCI_IRQ_AFFINITY. In this way, all CPUs will be in each HW queue
affinity mask, so should not create completion problems if any CPUs go
offline.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250715111535.499853-1-john.g.garry@oracle.com
Closes: https://lore.kernel.org/linux-scsi/20250618192427.3845724-1-jmeneghi@redhat.com/
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
SCSI_UFSHCD already selects DEVFREQ_GOV_SIMPLE_ONDEMAND, drop the check.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250724-topic-ufs_compile_check-v1-1-5ba9e99dbd52@oss.qualcomm.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In _mpt3sas_fw_work() the fw_event reference is removed, it should also
be freed in all cases.
Fixes: 4318c7347847 ("scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware.")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20250723153018.50518-1-thenzl@redhat.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In case of an ib_fast_reg_mr allocation failure during iSER setup, the
machine hits a panic because iscsi_conn->dd_data is initialized
unconditionally, even when no memory is allocated (dd_size == 0). This
leads invalid pointer dereference during connection teardown.
Fix by setting iscsi_conn->dd_data only if memory is actually allocated.
Panic trace:
------------
iser: iser_create_fastreg_desc: Failed to allocate ib_fast_reg_mr err=-12
iser: iser_alloc_rx_descriptors: failed allocating rx descriptors / data buffers
BUG: unable to handle page fault for address: fffffffffffffff8
RIP: 0010:swake_up_locked.part.5+0xa/0x40
Call Trace:
complete+0x31/0x40
iscsi_iser_conn_stop+0x88/0xb0 [ib_iser]
iscsi_stop_conn+0x66/0xc0 [scsi_transport_iscsi]
iscsi_if_stop_conn+0x14a/0x150 [scsi_transport_iscsi]
iscsi_if_rx+0x1135/0x1834 [scsi_transport_iscsi]
? netlink_lookup+0x12f/0x1b0
? netlink_deliver_tap+0x2c/0x200
netlink_unicast+0x1ab/0x280
netlink_sendmsg+0x257/0x4f0
? _copy_from_user+0x29/0x60
sock_sendmsg+0x5f/0x70
Signed-off-by: Showrya M N <showrya@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://lore.kernel.org/r/20250627112329.19763-1-showrya@chelsio.com
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Note that there is no executable code altered by this patch.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507181446.aAoFiDm5-lkp@intel.com/
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20250721164652.335716-1-emilne@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When the bfad_im_probe() function fails during initialization, the memory
pointed to by bfad->im is freed without setting bfad->im to NULL.
Subsequently, during driver uninstallation, when the state machine enters
the bfad_sm_stopping state and calls the bfad_im_probe_undo() function,
it attempts to free the memory pointed to by bfad->im again, thereby
triggering a double-free vulnerability.
Set bfad->im to NULL if probing fails.
Signed-off-by: jackysliu <1972843537@qq.com>
Link: https://lore.kernel.org/r/tencent_3BB950D6D2D470976F55FC879206DE0B9A09@qq.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: ddcc7e347a89 ("isci: fix dma_unmap_sg usage")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250627142451.241713-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: b5762948263d ("[SCSI] mvsas: Add Marvell 6440 SAS/SATA driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250627134822.234813-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 692e5d73a811 ("scsi: elx: efct: LIO backend interface routines")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250627114117.188480-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Configurations with large numbers of FC rports per host instance are
taking a very long time to complete all devloss work. Increase potential
parallelism by using a per-rport devloss_work_q for dev_loss_work and
fast_io_fail_work.
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20250707202225.1203189-1-emilne@redhat.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
On Google gs101, the number of UTP transfer request slots (nutrs) is 32,
and in this case the driver ends up programming the UTRL_NEXUS_TYPE
incorrectly as 0.
This is because the left hand side of the shift is 1, which is of type
int, i.e. 31 bits wide. Shifting by more than that width results in
undefined behaviour.
Fix this by switching to the BIT() macro, which applies correct type
casting as required. This ensures the correct value is written to
UTRL_NEXUS_TYPE (0xffffffff on gs101), and it also fixes a UBSAN shift
warning:
UBSAN: shift-out-of-bounds in drivers/ufs/host/ufs-exynos.c:1113:21
shift exponent 32 is too large for 32-bit type 'int'
For consistency, apply the same change to the nutmrs / UTMRL_NEXUS_TYPE
write.
Fixes: 55f4b1f73631 ("scsi: ufs: ufs-exynos: Add UFS host support for Exynos SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250707-ufs-exynos-shift-v1-1-1418e161ae40@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Sphinx reports indentation warning on scsi_track_queue_full() return
values:
Documentation/driver-api/scsi:101: ./drivers/scsi/scsi.c:247: ERROR: Unexpected indentation. [docutils]
Fix the warning by making the return values listing a bullet list.
Fixes: eb44820c28bc ("[SCSI] Add Documentation and integrate into docbook build")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20250702035822.18072-2-bagasdotme@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 88a678bbc34c ("ibmvscsis: Initial commit of IBM VSCSI Tgt Driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250630111803.94389-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Correct the misspelling of "transitition" to "transition" in a comment
in ibmvscsi_tgt.c for clarity.
Signed-off-by: Ankit Dange <ankitdange37@gmail.com>
Link: https://lore.kernel.org/r/20250628125320.295824-1-ankitdange37@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Updated driver version to 8.14.0.5.50
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-5-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
On 32-bit systems, 64-bit BAR writes to admin queue registers are
performed as two 32-bit writes. Without locking, this can cause partial
writes when accessed concurrently.
Updated per-queue spinlocks is used to serialize these writes and prevent
race conditions.
Fixes: 824a156633df ("scsi: mpi3mr: Base driver code")
Cc: stable@vger.kernel.org
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The volatile qualifier is redundant for __iomem pointers.
Cleaned up usage in mpi3mr_writeq() and sysif_regs pointer as per
Upstream compliance.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-3-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The "is_waiting" flag was updated after calling complete(), which could
lead to a race where the waiting thread wakes up before the flag is
cleared. This may cause a missed wakeup or stale state check.
Reorder the operations to update "is_waiting" before signaling completion
to ensure consistent state.
Fixes: 824a156633df ("scsi: mpi3mr: Base driver code")
Cc: stable@vger.kernel.org
Co-developed-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Enable internal clock gating for Qualcomm UFS host controller by setting
the following attributes to 1 during host controller initialization:
- DL_VS_CLK_CFG
- PA_VS_CLK_CFG_REG
- DME_VS_CORE_CLK_CTRL.DME_HW_CGC_EN
This change is necessary to support the internal clock gating mechanism
in Qualcomm UFS host controller. This is power saving feature and hence
driver can continue to function correctly despite any error in enabling
these feature.
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250714075336.2133-4-quic_nitirawa@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Introduce ufshcd_dme_rmw() API to read, modify, and write DME attributes
in UFS host controllers using a mask and value.
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250714075336.2133-3-quic_nitirawa@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The MCQ feature and ESI are supported by all Qualcomm UFS controller
versions 6 and above.
Therefore, update the ESI vector mask in the UFS_MEM_CFG3 register for
platforms with major version number of 6 or higher.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250714075336.2133-2-quic_nitirawa@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Improve code readability without modifying the behavior of the code.
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250624210541.512910-4-bvanassche@acm.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The historic QLogic firmware URL redirects to a Marvell page that only
provides drivers.
Refer to linux-firmware instead.
Cc: Nilesh Javali <njavali@marvell.com>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: QLOGIC ML <GR-QLogic-Storage-Upstream@marvell.com>
Cc: LINUX SCSI ML <linux-scsi@vger.kernel.org>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Link: https://lore.kernel.org/r/20250624190926.115009-1-xose.vazquez@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Some functions return a negative value to indicate an error while other
functions return a value != 0 to indicate an error. Document the return
value behavior where this documentation is missing and fix the return
value documentation where necessary. Add warnings to detect mismatches
between documentation and implementation. This matters because several
sysfs callback functions only work correctly if a negative value is
returned upon error.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250623215909.4169007-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
Macpaul Lin
Adrian Hunter
Archana Patni
Peter Wang
Alice Chao
Naomi Chu
Liu Song
Ranjan Kumar
Maurizio Lombardi
Yihang Li
Mike Christie
Seunghui Lee
Li Lingfeng
John Garry
Konrad Dybcio
Tomas Henzl
Showrya M N
Ewan D. Milne
jackysliu
Thomas Fourier
André Draszik
Bagas Sanjaya
Ankit Dange
Nitin Rawat
Bao D. Nguyen
Bart Van Assche
Xose Vazquez Perez