| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Previously intel_gvt_init() was called very early even before
MMIO initialization which had several drawbacks:
- Have to handle MMIO access for initial MMIO state dump if golden
state firmware is not available
- Hypervisor detection should depend on pvinfo only instead of detecting
hypervisor status.
- Don't know hw resource size e.g aperture, ggtt size to determine
for vGPU type, etc.
This trys to move intel_gvt_init() call late after required info
has already been initialized for GVT host.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
The current virtual edid can only support the resolution up
to 1024x768. Update the virtual edid so that can support more
resoltions. With this new virtual edid, resolution can
be up to 1920x1200.
V2: add detailed modeline description in edid code comments
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
The size computations done in the ioctl function use an integer.
If userspace submits a request with req->cmd_nr or req->cmd_buf_nr
set to INT_MAX, the integer computations overflow later, leading
to potential (kernel) memory corruption.
Prevent this issue by enforcing a limit on the number of submitted
commands, so that we have enough headroom later for the size
computations.
Note that this change has no impact on the currently available
users in userspace, like e.g. libdrm/exynos.
While at it, also make a comment about the size computation more
detailed.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
We were trying to print an error message if we timed out here, but the
loop actually ends with "tries" set to UINT_MAX and not zero. Fix this
by changing from tries-- to --tries.
A for loop would actually be the most natural way to do this. My fix
means we only loop 99 times instead of 100 but that's probably ok.
Fixes: a696394c5224 ('drm/exynos: mixer: simplify loop in vp_win_reset()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch replaces specific atomic commit function
with atomic helper commit one.
For this, it removes existing atomic commit function
and relevant code specific to Exynos DRM and makes
atomic helper commit to be used instead.
Below are changes for the use of atomic helper commit:
- add atomic_commit_tail callback specific to Exynos DRM
. default implemention of atomic helper doesn't mesh well
with runtime PM so the device driver which supports runtime
PM should call drm_atomic_helper_commit_modeset_enables function
prior to drm_atomic_helper_commit_planes function call.
atomic_commit_tail callback implements this call ordering.
- allow plane commit only in case that CRTC device is enabled.
. for this, it calls atomic_helper_commit_planes function
with DRM_PLANE_COMMIT_ACTIVE_ONLY flag in atomic_commit_tail callback.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
|
|
This patch removes exynos_drm_crtc_cancel_page_flip call
when drm is closed because at that time, events will be released
by drm_events_release function.
Changelog v1:
- remove exynos_drm_crtc_cancel_page_flip function also because
this funtion isn't used anymore.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
|
|
This patch adds runtime support calls to notify device core when MIC
device is really in use. Runtime PM is implemented by enabling and
disabling clocks like in other Exynos DRM subdrivers. Adding runtime
PM support is needed to let power domain with this device to be turned
off when display is not used.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This is the deprecated function for when you embedded the framebuffer
somewhere else (which breaks refcounting). But exynos is using
drm_framebuffer_remove and a free-standing fb, so this is rendundant.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The OF graph is not necessary because the panel is a child of
dsi. therefore, the parse_dt function of dsi does not need to
check the remote_node connected to the panel. and the whole
parse_dt function should be refactored later.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Before applying the patch, used the of_get_videomode function to
parse the display-timings in the panel which is the child driver
of dsi in the devicetree. this is wrong. So removed the
of_get_videomode and fixed to get videomode struct through
mode_set callback function.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Now that we wait for DRM panels to be available before registering the
DRM device (returning -EPROBE_DEFER if the panel has not been probed
yet), we no longer need to put the fbdev creation code in
->output_poll_changed().
This removes the 10 secs delay between DRM dev registration and fbdev
creation (polling period = 10 seconds).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Alex Vazquez <avazquez.dev@gmail.com>
|
|
drm_debugfs_cleanup() now removes all minor->debugfs_list entries
automatically, so the drm_driver.debugfs_cleanup callback is not
needed.
Cc: eric@anholt.net
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-17-noralf@tronnes.org
|
|
It adds the TV Encoder driver to support video output in PAL and NTSC
format. The driver uses syscon/regmap interface to configure register
bit sitting in SYSCTRL module for DAC power control.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
|
|
It adds bindings doc for ZTE VOU TV Encoder device.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
|
|
The clock control module (CRM) cannot always provide desired frequency
for all VOU output devices. That's why VOU integrates a few dividers
to further divide the clocks from CRM. Let's add an interface for
configuring these dividers.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
|
|
Although data in struct vou_inf is defined per output device, it doesn't
belong to the device itself but VOU control module. All these data can
just be defined in VOU driver, and output device driver only needs to
invoke VOU driver function with device ID to enable/disable specific
output device.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
|
|
It adds interlace mode support in VOU TIMING_CTRL and channel control
block, so that VOU driver gets ready to support output device in
interlace mode like TV Encoder.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
|
|
It enables VOU VL (Video Layer) to support overlay plane with scaling
function. VL0 has some quirks on scaling support. We choose to skip it
and only adds VL1 and VL2 into DRM core for now.
Function zx_plane_atomic_disable() gets moved around with no changes to
save a forward declaration.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
|
|
There are a few hardware bits for each graphic layer to control main/aux
channel and clock selection, as well as the layer enabling. These bits
sit outside the layer block itself, but in VOU control glue block. We
currently set these bits up at CRTC initialization for once, and do not
support disabling the layer.
This patch creates a pair of functions zx_vou_layer_enable[disable] to
be invoked from plane hooks .atomic_update and .atomic_disable to set up
and tear down the layer. This is generic for both graphic and video
layers, so it will make the overlay plane support to be added later much
easier.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
|
|
Move struct zx_plane from zx_plane.c to zx_plane.h, so that it can be
accessed from zx_vou driver, and we can save the use of struct
zx_layer_data completely. More importantly, those additional data used
by VOU controller to enable/disable graphic and video layers can later
be added and accessed much more easily from zx_vou driver.
While at it, we make two changes to zx_plane_init() interface:
- Encode struct device pointer in zx_plane, so that we do not need to
pass it as a parameter.
- Change return of zx_plane_init() from struct drm_plane pointer to
error code, since we can get the pointer from zx_plane in zx_vou
driver now.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
|
|
It enables HDMI audio support through SPDIF interface based on generic
hdmi-audio-codec driver. The HDMI hardware supports more audio
interfaces than SPDIF, like I2S, which may be added later.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
ZTE DRM driver uses drm_display_mode_to_videomode() in function
zx_crtc_enable(). Select VIDEOMODE_HELPERS in Kconfig to fix the
following link error.
LD vmlinux.o
MODPOST vmlinux.o
drivers/built-in.o: In function `zx_crtc_enable':
:(.text+0xbdeb8): undefined reference to `drm_display_mode_to_videomode'
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
Currently this tracepoint is solely used by dma_fence_enable_sw_signaling,
however I have a need to manually perform the hw enabling of the
signaling and would like to emit this tracepoint for completeness.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170124115758.31353-1-chris@chris-wilson.co.uk
|
|
They are 64bit not 32 for a while now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We don't need to use the PCI BAR on APUs. This allows us to access
the full VRAM directly without being limited by the BAR size.
v2: squash in 64bit shift fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We don't need to use the PCI BAR on APUs. This allows us to access
the full VRAM directly without being limited by the BAR size.
v2: squash in 64bit shift fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Return early if it's disabled.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. current_ps/request_ps not update.
2. compare crrent_ps and request_ps, if same,
don't re-set power state.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The vfct table can contain multiple vbios images if the
platform contains multiple GPUs. Noticed by netkas on
phoronix forums. This patch fixes those platforms.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The vfct table can contain multiple vbios images if the
platform contains multiple GPUs. Noticed by netkas on
phoronix forums. This patch fixes those platforms.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Move these to the amdgpu directory to match what we
do for other asics.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
All of these are available elsewhere.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No longer necessary with the new 58 mc ucode.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=76490
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No longer necessary with the new 58 mc ucode.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Here, If ioremap_nocache will fail. It will return NULL.
Kernel can run into a NULL-pointer dereference.
This error check will avoid NULL pointer dereference.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Here, If ioremap_nocache will fail. It will return NULL.
Kernel can run into a NULL-pointer dereference.
This error check will avoid NULL pointer dereference.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In the case of pass-through, amdgpu.ko may be included into a image
with the hard code ID therefore loading driver with specified virtual
display ID will lose efficacy when the BDF of GPU modifies.So add the
new ID string "all" for it as same as vf case what does.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Yintian Tao <yttao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the bo creation changes that have been done to the radeon driver in
recent times, e.g. disable GTT WC on 32 bit because it is broken there,
and also disable it generally (and print a warning message) when
CONFIG_X86_PAT is not set.
v2: agd: fix warning in defined(CONFIG_X86) && !defined(CONFIG_X86_PAT)
case
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nils Holland <nholland@tisys.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In smu7_clockpowergating.h, the #ifndef statement which prevents
multiple inclusions of the header file uses _SMU7_CLOCK_POWER_GATING_H_
but the following #define statement uses _SMU7_CLOCK__POWER_GATING_H_.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Without the custom LRU management the callback is not used any more.
agd: fix trivial warning
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The additional housekeeping had too much CPU overhead,
let's use the BO priorities instead.
agd: also revert hibmc changes
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Give kernel allocations a higher priority cause it is often
more work to swap them back in.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Keeping groups of BOs on the LRU is to time consuming on command submission.
Instead use the newly added BO priority to give a certain eviction order.
v2: agd: trivial warning fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This way the driver can specify a priority for a BO which has the effect that
a BO is only evicted when all other BOs with a lower priority are evicted
first.
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Not allowing errors here is completely pointless and actually dangerous
cause trying to continue on an error can cause an endless loop.
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For virt, freed mailbox irq should be handled in hw fini, not hw
init. Correct it.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reboot process will call HW fini functions of IP blocks. For virt,
need to send event three before hw fini and send event four after
hw fini.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So we can determine which device the entry is before connecting
a display.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
Zhenyu Wang
Chuanxiao Dong
Joonyoung Shim
Dan Carpenter
Inki Dae
Marek Szyprowski
Daniel Vetter
Hoegeun Kwon
Boris Brezillon
Noralf Trønnes
Shawn Guo
Chris Wilson
Christian König
Rex Zhu
Alex Deucher
Arvind Yadav
Yintian Tao
Junwei Zhang
Nils Holland
Nicolas Iooss
Xiangliang Yu
Tom St Denis