aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-11-17net/mlx4_en: remove napi_hash_del() callEric Dumazet1-4/+0
There is no need calling napi_hash_del()+synchronize_rcu() before calling netif_napi_del() netif_napi_del() does this already. Using napi_hash_del() in a driver is useful only when dealing with a batch of NAPI structures, so that a single synchronize_rcu() can be used. mlx4_en_deactivate_cq() is deactivating a single NAPI. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16mlxsw: minimal: Add I2C support for Mellanox ASICsVadim Pasternak3-0/+110
Add I2C access support for Mellanox ASICs: - Virtual Protocol Interconnect switches SwitchX, SwitchX2, providing InfiniBand, Ethernet and Fibre Channel connectivity; - Infiniband switches SwitchIB, SwitchIB2: - Ethernet switch Spectrum. Example of probing activation: echo mlxsw_minimal 0x48 > /sys/bus/i2c/devices/i2c-2/new_device Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16mlxsw: Invoke driver's init/fini methods only if definedVadim Pasternak1-5/+9
We are going to add a minimal driver on top of the mlxsw core infrastructure, which will be mainly used for hardware monitoring in Baseboard management controller (BMC) installations. Unlike the switch drivers (e.g., spectrum, switchx2), this driver does not initialize the ASIC and therefore doesn't need to implement the init() and fini() methods in its 'mlxsw_driver' struct. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16mlxsw: Introduce support for I2C busVadim Pasternak4-0/+654
Add I2C bus implementation for Mellanox Technologies Switch ASICs. This includes command interface implementation using input / out mailboxes, whose location is retrieved from the firmware during probe time. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16mlxsw: Add bus capability flagVadim Pasternak3-0/+10
The mlxsw core infrastructure currently assumes that communication with the ASIC is always possible using Ethernet management datagrams (EMADs), but this is only possible when the PCI bus is used. The bus capability flag is added to indicate EMAD support and make core initialize EMAD communication only when it's set. Otherwise, register access is done using command interface. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: netcp: replace IS_ERR_OR_NULL by IS_ERRJulia Lawall1-3/+3
knav_queue_open always returns an ERR_PTR value, never NULL. This can be confirmed by unfolding the function calls and conforms to the function's documentation. Thus, replace IS_ERR_OR_NULL by IS_ERR in error checks. The change is made using the following semantic patch: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; statement S; @@ x = knav_queue_open(...); if ( - IS_ERR_OR_NULL + IS_ERR (x)) S // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16sctp: use new rhlist interface on sctp transport rhashtableXin Long5-50/+64
Now sctp transport rhashtable uses hash(lport, dport, daddr) as the key to hash a node to one chain. If in one host thousands of assocs connect to one server with the same lport and different laddrs (although it's not a normal case), all the transports would be hashed into the same chain. It may cause to keep returning -EBUSY when inserting a new node, as the chain is too long and sctp inserts a transport node in a loop, which could even lead to system hangs there. The new rhlist interface works for this case that there are many nodes with the same key in one chain. It puts them into a list then makes this list be as a node of the chain. This patch is to replace rhashtable_ interface with rhltable_ interface. Since a chain would not be too long and it would not return -EBUSY with this fix when inserting a node, the reinsert loop is also removed here. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16bnxt_en: Add ethtool -n|-N rx-flow-hash support.Michael Chan1-3/+164
To display and modify the RSS hash. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16bnxt_en: Add UDP RSS support for 57X1X chips.Michael Chan2-8/+16
The newer chips have proper support for 4-tuple UDP RSS. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16bnxt_en: Enhance autoneg support.Michael Chan2-0/+24
On some dual port NICs, the speed setting on one port can affect the available speed on the other port. Add logic to detect these changes and adjust the advertised speed settings when necessary. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16bnxt_en: Update firmware interface spec to 1.5.4.Michael Chan2-5/+94
Use the new FORCE_LINK_DWN bit to shutdown link during close. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16netpoll: more efficient lockingEric Dumazet4-11/+10
Callers of netpoll_poll_lock() own NAPI_STATE_SCHED Callers of netpoll_poll_unlock() have BH blocked between the NAPI_STATE_SCHED being cleared and poll_lock is released. We can avoid the spinlock which has no contention, and use cmpxchg() on poll_owner which we need to set anyway. This removes a possible lockdep violation after the cited commit, since sk_busy_loop() re-enables BH before calling busy_poll_stop() Fixes: 217f69743681 ("net: busy-poll: allow preemption in sk_busy_loop()") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16cadence: Add LSO support.Rafal Ozieblo2-12/+140
New Cadence GEM hardware support Large Segment Offload (LSO): TCP segmentation offload (TSO) as well as UDP fragmentation offload (UFO). Support for those features was added to the driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16netronome: don't access real_num_rx_queues directlyArnd Bergmann1-8/+6
The netdev->real_num_rx_queues setting is only available if CONFIG_SYSFS is enabled, so we now get a build failure when that is turned off: netronome/nfp/nfp_net_common.c: In function 'nfp_net_ring_swap_enable': netronome/nfp/nfp_net_common.c:2489:18: error: 'struct net_device' has no member named 'real_num_rx_queues'; did you mean 'real_num_tx_queues'? As far as I can tell, the check here is only used as an optimization that we can skip in order to fix the compilation. If sysfs is disabled, the following netif_set_real_num_rx_queues() has no effect. Fixes: 164d1e9e5d52 ("nfp: add support for ethtool .set_channels") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16sfc: remove napi_hash_del() callEric Dumazet1-3/+2
Calling napi_hash_del() after netif_napi_del() is pointless. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Edward Cree <ecree@solarflare.com> Cc: Bert Kenward <bkenward@solarflare.com> Acked-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16lwtunnel: subtract tunnel headroom from mtu on output redirectDavid Lebrun1-1/+2
This patch changes the lwtunnel_headroom() function which is called in ipv4_mtu() and ip6_mtu(), to also return the correct headroom value when the lwtunnel state is OUTPUT_REDIRECT. This patch enables e.g. SR-IPv6 encapsulations to work without manually setting the route mtu. Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16mlxsw: spectrum_router: Adjust placement of FIB abort warningIdo Schimmel1-3/+3
The recent merge commit bb598c1b8c9b ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") would cause the FIB abort warning to fire whenever we flush the FIB tables - either during module removal or actual abort. Move it back to its rightful location in the FIB abort function. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: dsa: mv88e6xxx: Respect SPEED_UNFORCED, don't set force bitAndrew Lunn1-1/+1
The SPEED_UNFORCED indicates the MAC & PHY should perform auto-negotiation to determine a speed which works. If this is called for, don't set the force bit. If it is set, the MAC actually does 10Gbps, why the internal PHYs don't support. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16amd-xgbe: Fix maximum GPIO value checkLendacky, Thomas1-2/+2
The GPIO support in the hardware allows for up to 16 GPIO pins, enumerated from 0 to 15. The driver uses the wrong value (16) to validate the GPIO pin range in the routines to set and clear the GPIO output pins. Update the code to use the correct value (15). Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16amd-xgbe: Fix possible uninitialized variableLendacky, Thomas1-1/+1
The debugfs support in the driver uses a common routine to write the debugfs values. In this routine, if the input file position is non-zero then the write routine will not return an error and an output parameter will not have been set. Because an error isn't returned an uninitialized value will be written into a register. Fix the common write routine to return an error if the input file position is non-zero, which will propagate back to the caller. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: ethernet: marvell: pxa168_eth: Implement ethtool::nway_resetFlorian Fainelli1-0/+1
Implement ethtool::nway_reset using phy_ethtool_nway_reset. We are already using dev->phydev all over the place so this comes for free. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: ethernet: mvpp2: Implement ethtool::nway_resetFlorian Fainelli1-0/+1
Implement ethtool::nway_reset using phy_ethtool_nway_reset. We are already using dev->phydev all over the place so this comes for free. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: ethernet: mvneta: Implement ethtool::nway_resetFlorian Fainelli1-0/+1
Implement ethtool::nway_reset using phy_ethtool_nway_reset. We are already using dev->phydev all over the place so this comes for free. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: ethoc: Implement ethtool::nway_resetFlorian Fainelli1-0/+1
Implement ethtool::nway_reset using phy_ethtool_nway_reset. We are already using dev->phydev all over the place so this comes for free. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: stmmac: Implement ethtool::nway_resetFlorian Fainelli1-0/+1
Utilize the generic phy_ethtool_nway_reset() helper function to implement an autonegotiation restart. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16bnx2x: switch to napi_complete_done()Eric Dumazet1-7/+8
Switch from napi_complete() to napi_complete_done() for better GRO support (gro_flush_timeout) and core NAPI features. Do not rearm interrupts if we are busy polling, to reduce bus and interrupts overhead. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net/mlx4_en: use napi_complete_done() return valueEric Dumazet1-2/+2
Do not rearm interrupts if we are busy polling. mlx4 uses separate CQ for TX and RX, so number of TX interrupts does not change, unfortunately. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: busy-poll: return busypolling status to driversEric Dumazet2-7/+10
NAPI drivers use napi_complete_done() or napi_complete() when they drained RX ring and right before re-enabling device interrupts. In busy polling, we can avoid interrupts being delivered since we are polling RX ring in a controlled loop. Drivers can chose to use napi_complete_done() return value to reduce interrupts overhead while busy polling is active. This is optional, legacy drivers should work fine even if not updated. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: busy-poll: remove need_resched() from sk_can_busy_loop()Eric Dumazet1-3/+2
Now sk_busy_loop() can schedule by itself, we can remove need_resched() check from sk_can_busy_loop() Also add a const to its struct sock parameter. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: busy-poll: allow preemption in sk_busy_loop()Eric Dumazet2-20/+92
After commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), sk_busy_loop() needs a bit of care : softirqs might be delayed since we do not allow preemption yet. This patch adds preemptiom points in sk_busy_loop(), and makes sure no unnecessary cache line dirtying or atomic operations are done while looping. A new flag is added into napi->state : NAPI_STATE_IN_BUSY_POLL This prevents napi_complete_done() from clearing NAPIF_STATE_SCHED, so that sk_busy_loop() does not have to grab it again. Similarly, netpoll_poll_lock() is done one time. This gives about 10 to 20 % improvement in various busy polling tests, especially when many threads are busy polling in configurations with large number of NIC queues. This should allow experimenting with bigger delays without hurting overall latencies. Tested: On a 40Gb mlx4 NIC, 32 RX/TX queues. echo 70 >/proc/sys/net/core/busy_read for i in `seq 1 40`; do echo -n $i: ; ./super_netperf $i -H lpaa24 -t UDP_RR -- -N -n; done Before: After: 1: 90072 92819 2: 157289 184007 3: 235772 213504 4: 344074 357513 5: 394755 458267 6: 461151 487819 7: 549116 625963 8: 544423 716219 9: 720460 738446 10: 794686 837612 11: 915998 923960 12: 937507 925107 13: 1019677 971506 14: 1046831 1113650 15: 1114154 1148902 16: 1105221 1179263 17: 1266552 1299585 18: 1258454 1383817 19: 1341453 1312194 20: 1363557 1488487 21: 1387979 1501004 22: 1417552 1601683 23: 1550049 1642002 24: 1568876 1601915 25: 1560239 1683607 26: 1640207 1745211 27: 1706540 1723574 28: 1638518 1722036 29: 1734309 1757447 30: 1782007 1855436 31: 1724806 1888539 32: 1717716 1944297 33: 1778716 1869118 34: 1805738 1983466 35: 1815694 2020758 36: 1893059 2035632 37: 1843406 2034653 38: 1888830 2086580 39: 1972827 2143567 40: 1877729 2181851 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16bpf: Fix compilation warning in __bpf_lru_list_rotate_inactiveMartin KaFai Lau1-1/+1
gcc-6.2.1 gives the following warning: kernel/bpf/bpf_lru_list.c: In function ‘__bpf_lru_list_rotate_inactive.isra.3’: kernel/bpf/bpf_lru_list.c:201:28: warning: ‘next’ may be used uninitialized in this function [-Wmaybe-uninitialized] The "next" is currently initialized in the while() loop which must have >=1 iterations. This patch initializes next to get rid of the compiler warning. Fixes: 3a08c2fd7634 ("bpf: LRU List") Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16ipv6: sr: add option to control lwtunnel supportDavid Lebrun3-3/+23
This patch adds a new option CONFIG_IPV6_SEG6_LWTUNNEL to enable/disable support of encapsulation with the lightweight tunnels. When this option is enabled, CONFIG_LWTUNNEL is automatically selected. Fix commit 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Without a proper option to control lwtunnel support for SR-IPv6, if CONFIG_LWTUNNEL=n then the IPv6 initialization fails as a consequence of seg6_iptunnel_init() failure with EOPNOTSUPP: NET: Registered protocol family 10 IPv6: Attempt to unregister permanent protocol 6 IPv6: Attempt to unregister permanent protocol 136 IPv6: Attempt to unregister permanent protocol 17 NET: Unregistered protocol family 10 Tested (compiling, booting, and loading ipv6 module when relevant) with possible combinations of CONFIG_IPV6={y,m,n}, CONFIG_IPV6_SEG6_LWTUNNEL={y,n} and CONFIG_LWTUNNEL={y,n}. Reported-by: Lorenzo Colitti <lorenzo@google.com> Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15alx: enable multiple tx queuesTobias Regnery1-2/+6
Enable multiple tx queues by default based on the number of online cpus. The hardware supports up to four tx queues. Based on the downstream driver at github.com/qca/alx Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15alx: enable msi-x interrupts by defaultTobias Regnery1-5/+1
Remove the module parameter to enable msi-x support and enable msi-x interrupts unconditionally by default. This is a preparatory step to enable multi queue support by default, because this is only working with msi-x interrupts. Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15alx: prepare tx path for multi queue supportTobias Regnery1-13/+45
This patch prepares the tx path to send data on multiple tx queues. It introduces per queue register adresses and uses them in the alx_tx_queue structs. There are new helper functions for the queue mapping in the tx path. Based on the downstream driver at github.com/qca/alx Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15alx: prepare resource allocation for multi queue supportTobias Regnery1-52/+97
Allocate, initialise and free alx_tx_queue structs based on the number of alx_napi structures. Also increase the size of the descriptor memory based on the number of tx queues in use. Based on the downstream driver at github.com/qca/alx Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15alx: prepare interrupt functions for multiple queuesTobias Regnery1-27/+105
Extend the interrupt bringup code and the interrupt handler for msi-x interrupts in order to handle multiple queues. We must change the poll function because with multiple queues it is possible that an alx_napi structure has only a tx or only a rx queue pointer. Based on the downstream driver at github.com/qca/alx Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15alx: switch to per queue data structuresTobias Regnery2-95/+93
Remove the tx and rx queue structures from the alx_priv structure and switch everything over to the queue pointers in the alx_napi structure. Based on the downstream driver at github.com/qca/alx Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15alx: add ability to allocate and free alx_napi structuresTobias Regnery1-21/+78
Add new functions to allocate and free the alx_napi structures and use them in __alx_open and __alx_stop. We only allocate one of these structures for now, as the rest of the driver is not yet ready for multiple queues. We switch over the setup of the interrupt mask and the call to netif_napi_add to the new function because we must adjust these later on a per queue basis. Based on the downstream driver at github.com/qca/alx Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15alx: extend data structures for multi queue supportTobias Regnery1-0/+31
Extend the driver data structures to be able to handle multiple queues. Based on the downstream driver at github.com/qca/alx Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15alx: refactor descriptor allocationTobias Regnery1-44/+53
Split the allocation of descriptor memory and the buffer allocation into a tx and rx function. This is in preparation for multiple queues where we need to iterate over the new functions. While at it drop the unneeded casting on the rx side. Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15arch/powerpc: Enable dpaa_ethMadalin Bucur1-0/+1
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15arch/powerpc: Enable FSL_FMANMadalin Bucur1-0/+1
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15arch/powerpc: Enable FSL_PAMUMadalin Bucur1-0/+1
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15dpaa_eth: add trace pointsMadalin Bucur4-0/+158
Add trace points on the hot processing path. Signed-off-by: Ruxandra Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15dpaa_eth: add sysfs exportsMadalin Bucur4-1/+174
Export Frame Queue and Buffer Pool IDs through sysfs. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15dpaa_eth: add ethtool statisticsMadalin Bucur3-2/+284
Add a series of counters to be exported through ethtool: - add detailed counters for reception errors; - add detailed counters for QMan enqueue reject events; - count the number of fragmented skbs received from the stack; - count all frames received on the Tx confirmation path; - add congestion group statistics; - count the number of interrupts for each CPU. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15dpaa_eth: add ethtool functionalityMadalin Bucur4-1/+224
Add support for basic ethtool operations. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15dpaa_eth: add support for DPAA EthernetMadalin Bucur6-0/+2850
This introduces the Freescale Data Path Acceleration Architecture (DPAA) Ethernet driver (dpaa_eth) that builds upon the DPAA QMan, BMan, PAMU and FMan drivers to deliver Ethernet connectivity on the Freescale DPAA QorIQ platforms. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15devres: add devm_alloc_percpu()Madalin Bucur3-0/+89
Introduce managed counterparts for alloc_percpu() and free_percpu(). Add devm_alloc_percpu() and devm_free_percpu() into the managed interfaces list. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>