aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2024-02-21wifi: iwlwifi: mvm: ensure offloading TID queue existsBenjamin Berg3-2/+38
The resume code path assumes that the TX queue for the offloading TID has been configured. At resume time it then tries to sync the write pointer as it may have been updated by the firmware. In the unusual event that no packets have been send on TID 0, the queue will not have been allocated and this causes a crash. Fix this by ensuring the queue exist at suspend time. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240218194912.6632e6dc7b35.Ie6e6a7488c9c7d4529f13d48f752b5439d8ac3c4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-15wifi: nl80211: reject iftype change with mesh ID changeJohannes Berg1-0/+2
It's currently possible to change the mesh ID when the interface isn't yet in mesh mode, at the same time as changing it into mesh mode. This leads to an overwrite of data in the wdev->u union for the interface type it currently has, causing cfg80211_change_iface() to do wrong things when switching. We could probably allow setting an interface to mesh while setting the mesh ID at the same time by doing a different order of operations here, but realistically there's no userspace that's going to do this, so just disallow changes in iftype when setting mesh ID. Cc: stable@vger.kernel.org Fixes: 29cbe68c516a ("cfg80211/mac80211: add mesh join/leave commands") Reported-by: syzbot+dd4779978217b1973180@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: iwlwifi: mvm: fix a crash when we run out of stationsEmmanuel Grumbach2-0/+7
A DoS tool that injects loads of authentication frames made our AP crash. The iwl_mvm_is_dup() function couldn't find the per-queue dup_data which was not allocated. The root cause for that is that we ran out of stations in the firmware and we didn't really add the station to the firmware, yet we didn't return an error to mac80211. Mac80211 was thinking that we have the station and because of that, sta_info::uploaded was set to 1. This allowed ieee80211_find_sta_by_ifaddr() to return a valid station object, but that ieee80211_sta didn't have any iwl_mvm_sta object initialized and that caused the crash mentioned earlier when we got Rx on that station. Cc: stable@vger.kernel.org Fixes: 57974a55d995 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240206175739.1f76c44b2486.I6a00955e2842f15f0a089db2f834adb9d10fbe35@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: iwlwifi: uninitialized variable in iwl_acpi_get_ppag_table()Dan Carpenter1-0/+3
This is an error path and Smatch complains that "tbl_rev" is uninitialized on this path. All the other functions follow this same patter where they set the error code and goto out_free so that's probably what was intended here as well. Fixes: e8e10a37c51c ("iwlwifi: acpi: move ppag code from mvm to fw/acpi") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://msgid.link/09900c01-6540-4a32-9451-563da0029cb6@moroto.mountain Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: iwlwifi: Fix some error codesDan Carpenter1-6/+6
This saves the error as PTR_ERR(wifi_pkg). The problem is that "wifi_pkg" is a valid pointer, not an error pointer. Set the error code to -EINVAL instead. Fixes: 2a8084147bff ("iwlwifi: acpi: support reading and storing WRDS revision 1 and 2") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://msgid.link/9620bb77-2d7c-4d76-b255-ad824ebf8e35@moroto.mountain Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: iwlwifi: clear link_id in time_eventMiri Korenblit1-1/+2
Before sending a SESSION PROTECTION cmd the driver checks if the link_id indicated in the time event (and for which the cmd will be sent) is valid and exists. Clear the te_data::link_id when FW notifies that a session protection ended, so the check will actually fail when it should. Fixes: 135065837310 ("wifi: iwlwifi: support link_id in SESSION_PROTECTION cmd") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240204235836.c64a6b3606c2.I35cdc08e8a3be282563163690f8ca3edb51a3854@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: iwlwifi: mvm: use correct address 3 in A-MSDUDaniel Gabay1-10/+59
As described in IEEE sta 802.11-2020, table 9-30 (Address field contents), A-MSDU address 3 should contain the BSSID address. In TX_CMD we copy the MAC header from skb, and skb address 3 holds the destination address, but it may not be identical to the BSSID. Using the wrong destination address appears to work with (most) receivers without MLO, but in MLO some devices are checking for it carefully, perhaps as a consequence of link to MLD address translation. Replace address 3 in the TX_CMD MAC header with the correct address while retaining the skb address 3 unchanged. This ensures that skb address 3 will be utilized later for constructing the A-MSDU subframes. Note that we fill in the MLD address, but the firmware will do the necessary translation to link address after encryption. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240204235836.4583a1bf9188.I3f8e7892bdf8f86b4daa28453771a8c9817b2416@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: reload info pointer in ieee80211_tx_dequeue()Johannes Berg1-2/+3
This pointer can change here since the SKB can change, so we actually later open-coded IEEE80211_SKB_CB() again. Reload the pointer where needed, so the monitor-mode case using it gets fixed, and then use info-> later as well. Cc: stable@vger.kernel.org Fixes: 531682159092 ("mac80211: fix VLAN handling with TXQs") Link: https://msgid.link/20240131164910.b54c28d583bc.I29450cec84ea6773cff5d9c16ff92b836c331471@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-05wifi: mt76: mt7996: fix fortify warningFelix Fietkau1-1/+2
Copy cck and ofdm separately in order to avoid __read_overflow2_field warning. Fixes: f75e4779d215 ("wifi: mt76: mt7996: add txpower setting support") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240203132446.54790-1-nbd@nbd.name
2024-02-02wifi: brcmfmac: Adjust n_channels usage for __counted_byKees Cook1-2/+4
After commit e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by"), the compiler may enforce dynamic array indexing of req->channels to stay below n_channels. As a result, n_channels needs to be increased _before_ accessing the newly added array index. Increment it first, then use "i" for the prior index. Solves this warning in the coming GCC that has __counted_by support: ../drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c: In function 'brcmf_internal_escan_add_info': ../drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:3783:46: warning: operation on 'req-> n_channels' may be undefined [-Wsequence-point] 3783 | req->channels[req->n_channels++] = chan; | ~~~~~~~~~~~~~~~^~ Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by") Cc: Arend van Spriel <aspriel@gmail.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com> Cc: Ian Lin <ian.lin@infineon.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Wright Feng <wright.feng@cypress.com> Cc: Hector Martin <marcan@marcan.st> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240126223150.work.548-kees@kernel.org
2024-02-02wifi: iwlwifi: do not announce EPCS supportBenjamin Berg1-4/+1
mac80211 does not have proper support for EPCS currently as that would require changing the ECDA parameters if EPCS (Emergency Preparedness Communications Service) is in use. As such, do not announce support for it in the capabilities. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240201155157.59d71656addc.Idde91b3018239c49fc6ed231b411d05354fb9fb1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: iwlwifi: exit eSR only after the FW doesMiri Korenblit1-3/+3
Currently the driver exits eSR by calling iwl_mvm_esr_mode_inactive() before updating the FW (by deactivating one of the links), and therefore before sending the EML frame notifying that we are no longer in eSR. This is wrong for several reasons: 1. The driver sends SMPS activation frames when we are still in eSR and SMPS should be disabled when in eSR 2. The driver restores RLC configuration as it was before eSR entering, and RLC command shouldn't be sent in eSR Fix this by calling iwl_mvm_esr_mode_inactive() after FW update Fixes: 12bacfc2c065 ("wifi: iwlwifi: handle eSR transitions") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://msgid.link/20240201155157.d8d9dc277d4e.Ib5aee0fd05e35b1da7f18753eb3c8fa0a3f872f3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: iwlwifi: mvm: fix a battery life regressionEmmanuel Grumbach1-1/+1
Fix the DBG_CONFIG_TOKEN to not enable debug components that would prevent the device to save power. Fixes: fc2fe0a5e856 ("wifi: iwlwifi: fw: disable firmware debug asserts") Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Eilon Rinat <eilon.rinat@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240128084842.90d2600edc27.Id657ea2f0ddb131f5f9d0ac39aeb8c88754fe54b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: mac80211: accept broadcast probe responses on 6 GHzJohannes Berg1-12/+18
On the 6 GHz band, probe responses are sent as broadcast to optimise medium usage. However, without OCE configuration we weren't accepting them, which is wrong, even if wpa_s is by default enabling OCE. Accept them without the OCE config as well. Link: https://msgid.link/20240129200907.5a89c2821897.I92e9dfa0f9b350bc7f37dd4bb38031d156d78d8a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: mac80211: adding missing drv_mgd_complete_tx() callJohannes Berg1-0/+1
There's a call to drv_mgd_prepare_tx() and so there should be one to drv_mgd_complete_tx(), but on this path it's not. Add it. Link: https://msgid.link/20240131164824.2f0922a514e1.I5aac89b93bcead88c374187d70cad0599d29d2c8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: mac80211: fix waiting for beacons logicJohannes Berg1-2/+1
This should be waiting if we don't have a beacon yet, but somehow I managed to invert the logic. Fix that. Fixes: 74e1309acedc ("wifi: mac80211: mlme: look up beacon elems only if needed") Link: https://msgid.link/20240131164856.922701229546.I239b379e7cee04608e73c016b737a5245e5b23dd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: mac80211: fix unsolicited broadcast probe configJohannes Berg1-7/+7
There's a bug in ieee80211_set_unsol_bcast_probe_resp(), it tries to return BSS_CHANGED_UNSOL_BCAST_PROBE_RESP (which has the value 1<<31) in an int, which makes it negative and considered an error. Fix this by passing the changed flags to set separately. Fixes: 3b1c256eb4ae ("wifi: mac80211: fixes in FILS discovery updates") Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://msgid.link/20240129195729.965b0740bf80.I6bc6f5236863f686c17d689be541b1dd2633c417@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: mac80211: initialize SMPS mode correctlyJohannes Berg1-4/+3
The SMPS mode is currently re-initialized too late, since ieee80211_prep_channel() can be called again after we've already done ieee80211_setup_assoc_link(), in case there's some override of the channel configuration. Fix this. Link: https://msgid.link/20240129195405.d6d74508be18.I0a7303b1ce4d8e5436011951ab624372a445c069@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: mac80211: fix driver debugfs for vif type changeJohannes Berg3-8/+3
If a driver implements the change_interface() method, we switch interface type without taking the interface down, but still will recreate the debugfs for it since it's a new type. As such, we should use the ieee80211_debugfs_recreate_netdev() function here to also recreate the driver's files, if it is indeed from a type change while up. Link: https://msgid.link/20240129155402.7311a36ffeeb.I18df02bbeb685d4250911de5ffbaf090f60c3803@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: mac80211: set station RX-NSS on reconfigJohannes Berg1-0/+2
When a station is added/reconfigured by userspace, e.g. a TDLS peer or a SoftAP client STA, rx_nss is currently not always set, so that it might be left zero. Set it up properly. Link: https://msgid.link/20240129155354.98f148a3d654.I193a02155f557ea54dc9d0232da66cf96734119a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: mac80211: fix RCU use in TDLS fast-xmitJohannes Berg1-3/+4
This looks up the link under RCU protection, but isn't guaranteed to actually have protection. Fix that. Fixes: 8cc07265b691 ("wifi: mac80211: handle TDLS data frames with MLO") Link: https://msgid.link/20240129155348.8a9c0b1e1d89.I553f96ce953bb41b0b877d592056164dec20d01c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: mac80211: improve CSA/ECSA connection refusalJohannes Berg1-27/+76
As mentioned in the previous commit, we pretty quickly found that some APs have ECSA elements stuck in their probe response, so using that to not attempt to connect while CSA is happening we never connect to such an AP. Improve this situation by checking more carefully and ignoring the ECSA if cfg80211 has previously detected the ECSA element being stuck in the probe response. Additionally, allow connecting to an AP that's switching to a channel it's already using, unless it's using quiet mode. In this case, we may just have to adjust bandwidth later. If it's actually switching channels, it's better not to try to connect in the middle of that. Reported-by: coldolt <andypalmadi@gmail.com> Closes: https://lore.kernel.org/linux-wireless/CAJvGw+DQhBk_mHXeu6RTOds5iramMW2FbMB01VbKRA4YbHHDTA@mail.gmail.com/ Fixes: c09c4f31998b ("wifi: mac80211: don't connect to an AP while it's in a CSA process") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240129131413.cc2d0a26226e.I682c016af76e35b6c47007db50e8554c5a426910@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: cfg80211: detect stuck ECSA element in probe respJohannes Berg2-1/+62
We recently added some validation that we don't try to connect to an AP that is currently in a channel switch process, since that might want the channel to be quiet or we might not be able to connect in time to hear the switching in a beacon. This was in commit c09c4f31998b ("wifi: mac80211: don't connect to an AP while it's in a CSA process"). However, we promptly got a report that this caused new connection failures, and it turns out that the AP that we now cannot connect to is permanently advertising an extended channel switch announcement, even with quiet. The AP in question was an Asus RT-AC53, with firmware 3.0.0.4.380_10760-g21a5898. As a first step, attempt to detect that we're dealing with such a situation, so mac80211 can use this later. Reported-by: coldolt <andypalmadi@gmail.com> Closes: https://lore.kernel.org/linux-wireless/CAJvGw+DQhBk_mHXeu6RTOds5iramMW2FbMB01VbKRA4YbHHDTA@mail.gmail.com/ Fixes: c09c4f31998b ("wifi: mac80211: don't connect to an AP while it's in a CSA process") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240129131413.246972c8775e.Ibf834d7f52f9951a353b6872383da710a7358338@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-01wifi: iwlwifi: remove extra kernel-docJohannes Berg1-2/+1
This no longer exists, remove the kernel-doc. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240128102209.d2192d79bc09.Id9551728d618248dd471382a5283503a8976237a@changeid
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for mt76 driversBreno Leitao29-0/+29
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the MediaTek mt76 drivers. Here is a sorted list of descriptions. It might make the reviewing process easier. MODULE_DESCRIPTION("MediaTek MT7603E and MT76x8 wireless driver"); MODULE_DESCRIPTION("MediaTek MT7615E and MT7663E wireless driver"); MODULE_DESCRIPTION("MediaTek MT7615E MMIO helpers"); MODULE_DESCRIPTION("MediaTek MT7663 SDIO/USB helpers"); MODULE_DESCRIPTION("MediaTek MT7663S (SDIO) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7663U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x02 helpers"); MODULE_DESCRIPTION("MediaTek MT76x02 MCU helpers"); MODULE_DESCRIPTION("MediaTek MT76x0E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x0U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x2 EEPROM helpers"); MODULE_DESCRIPTION("MediaTek MT76x2E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x2U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x connac layer helpers"); MODULE_DESCRIPTION("MediaTek MT76x EEPROM helpers"); MODULE_DESCRIPTION("MediaTek MT76x helpers"); MODULE_DESCRIPTION("MediaTek MT76x SDIO helpers"); MODULE_DESCRIPTION("MediaTek MT76x USB helpers"); MODULE_DESCRIPTION("MediaTek MT7915E MMIO helpers"); MODULE_DESCRIPTION("MediaTek MT7921 core driver"); MODULE_DESCRIPTION("MediaTek MT7921E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7921S (SDIO) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7921U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7925 core driver"); MODULE_DESCRIPTION("MediaTek MT7925E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7925U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT792x core driver"); MODULE_DESCRIPTION("MediaTek MT792x USB helpers"); MODULE_DESCRIPTION("MediaTek MT7996 MMIO helpers"); Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-10-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wilc1000Breno Leitao3-0/+3
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Atmel WILC1000 SPI driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-9-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wl18xxBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the TI WiLink 8 wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-8-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for p54spiBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Prism54 SPI wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-7-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wcn36xxBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Qualcomm Atheros WCN3660/3680 wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-6-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for ar5523Breno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Atheros AR5523 wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-5-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for Broadcom WLANBreno Leitao3-0/+3
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Broadcom FullMac WLAN drivers. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-4-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wl1251 and wl12xxBreno Leitao3-0/+3
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the TI wireless drivers wl12xx and wl1251. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-3-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wlcoreBreno Leitao3-0/+3
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the TI WLAN wlcore drivers. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-2-leitao@debian.org
2024-01-29MAINTAINERS: wifi: brcm80211: cleanup entryArend van Spriel1-4/+4
There has been some discussion about what is expected from a maintainer and so a cleanup seems to be in order. A dedicated mailing list has been created to discuss brcm80211 specific development issues. Keeping the status as Supported although help in maintaining this driver is welcomed. Cc: brcm80211@lists.linux.dev Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240126105724.384063-1-arend.vanspriel@broadcom.com
2024-01-26wifi: mac80211: Drop WBRF debugging statementsMario Limonciello1-2/+0
Due to the way that debugging is used in the mac80211 subsystem this message ends up being noisier than it needs to be. As the statement is only useful at a first stage of triage for BIOS bugs, just drop it. Cc: Jun Ma <Jun.Ma2@amd.com> Suggested-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240117030525.539-1-mario.limonciello@amd.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26wifi: iwlwifi: mvm: skip adding debugfs symlink for reconfigBenjamin Berg2-3/+6
The function to add an interface may be called without a previous removal if the HW is being reconfigured. As such, only add the symlink if the hardware is not being reconfigured due to a HW_RESTART. Fixes: c36235acb34f ("wifi: iwlwifi: mvm: rework debugfs handling") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240123200528.314395eacda4.I5823e962c3c3674b942383733debd10b3fe903e2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26wifi: cfg80211: fix wiphy delayed work queueingJohannes Berg1-1/+2
When a wiphy work is queued with timer, and then again without a delay, it's started immediately but *also* started again after the timer expires. This can lead, for example, to warnings in mac80211's offchannel code as reported by Jouni. Running the same work twice isn't expected, of course. Fix this by deleting the timer at this point, when queuing immediately due to delay=0. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen <j@w1.fi> Fixes: a3ee4dc84c4e ("wifi: cfg80211: add a work abstraction with special semantics") Link: https://msgid.link/20240125095108.2feb0eaaa446.I4617f3210ed0e7f252290d5970dac6a876aa595b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26wifi: iwlwifi: fix double-free bugJohannes Berg1-0/+1
The storage for the TLV PC register data wasn't done like all the other storage in the drv->fw area, which is cleared at the end of deallocation. Therefore, the freeing must also be done differently, explicitly NULL'ing it out after the free, since otherwise there's a nasty double-free bug here if a file fails to load after this has been parsed, and we get another free later (e.g. because no other file exists.) Fix that by adding the missing NULL assignment. Cc: stable@vger.kernel.org Fixes: 5e31b3df86ec ("wifi: iwlwifi: dbg: print pc register data once fw dump occurred") Reported-by: Guy Kaplan <guy.kaplan@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240123200528.675f3c24ec0d.I6ab4015cd78d82dd95471f840629972ef0331de3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26MAINTAINERS: remove myself as iwlwifi driver maintainerGregory Greenman1-1/+0
As I'm resigning from Intel, it's time to remove myself as a maintainer of iwlwifi. Good luck to Miri! Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://msgid.link/20240102122019.1689602-1-gregory.greenman@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-25tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ringGerhard Engleder1-0/+13
The fill ring of the XDP socket may contain not enough buffers to completey fill the RX queue during socket creation. In this case the flag XDP_RING_NEED_WAKEUP is not set as this flag is only set if the RX queue is not completely filled during polling. Set XDP_RING_NEED_WAKEUP flag also if RX queue is not completely filled during XDP socket creation. Fixes: 3fc2333933fd ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-25tsnep: Remove FCS for XDP data pathGerhard Engleder1-2/+2
The RX data buffer includes the FCS. The FCS is already stripped for the normal data path. But for the XDP data path the FCS is included and acts like additional/useless data. Remove the FCS from the RX data buffer also for XDP. Fixes: 65b28c810035 ("tsnep: Add XDP RX support") Fixes: 3fc2333933fd ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-25net: fec: fix the unhandled context fault from smmuShenwei Wang1-0/+2
When repeatedly changing the interface link speed using the command below: ethtool -s eth0 speed 100 duplex full ethtool -s eth0 speed 1000 duplex full The following errors may sometimes be reported by the ARM SMMU driver: [ 5395.035364] fec 5b040000.ethernet eth0: Link is Down [ 5395.039255] arm-smmu 51400000.iommu: Unhandled context fault: fsr=0x402, iova=0x00000000, fsynr=0x100001, cbfrsynra=0x852, cb=2 [ 5398.108460] fec 5b040000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off It is identified that the FEC driver does not properly stop the TX queue during the link speed transitions, and this results in the invalid virtual I/O address translations from the SMMU and causes the context faults. Fixes: dbc64a8ea231 ("net: fec: move calls to quiesce/resume packet processing out of fec_restart()") Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20240123165141.2008104-1-shenwei.wang@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-25selftests: bonding: do not test arp/ns target with mode balance-alb/tlbHangbin Liu1-4/+4
The prio_arp/ns tests hard code the mode to active-backup. At the same time, The balance-alb/tlb modes do not support arp/ns target. So remove the prio_arp/ns tests from the loop and only test active-backup mode. Fixes: 481b56e0391e ("selftests: bonding: re-format bond option tests") Reported-by: Jay Vosburgh <jay.vosburgh@canonical.com> Closes: https://lore.kernel.org/netdev/17415.1705965957@famine/ Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20240123075917.1576360-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-24fjes: fix memleaks in fjes_hw_setupZhipeng Lu1-7/+30
In fjes_hw_setup, it allocates several memory and delay the deallocation to the fjes_hw_exit in fjes_probe through the following call chain: fjes_probe |-> fjes_hw_init |-> fjes_hw_setup |-> fjes_hw_exit However, when fjes_hw_setup fails, fjes_hw_exit won't be called and thus all the resources allocated in fjes_hw_setup will be leaked. In this patch, we free those resources in fjes_hw_setup and prevents such leaks. Fixes: 2fcbca687702 ("fjes: platform_driver's .probe and .remove routine") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240122172445.3841883-1-alexious@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-24i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queueMaciej Fijalkowski1-0/+7
Now that i40e driver correctly sets up frag_size in xdp_rxq_info, let us make it work for ZC multi-buffer as well. i40e_ring::rx_buf_len for ZC is being set via xsk_pool_get_rx_frame_size() and this needs to be propagated up to xdp_rxq_info. Fixes: 1c9ba9c14658 ("i40e: xsk: add RX multi-buffer support") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-12-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24i40e: set xdp_rxq_info::frag_sizeMaciej Fijalkowski2-25/+24
i40e support XDP multi-buffer so it is supposed to use __xdp_rxq_info_reg() instead of xdp_rxq_info_reg() and set the frag_size. It can not be simply converted at existing callsite because rx_buf_len could be un-initialized, so let us register xdp_rxq_info within i40e_configure_rx_ring(), which happen to be called with already initialized rx_buf_len value. Commit 5180ff1364bc ("i40e: use int for i40e_status") converted 'err' to int, so two variables to deal with return codes are not needed within i40e_configure_rx_ring(). Remove 'ret' and use 'err' to handle status from xdp_rxq_info registration. Fixes: e213ced19bef ("i40e: add support for XDP multi-buffer Rx") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-11-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOLMaciej Fijalkowski1-0/+2
XSK ZC Rx path calculates the size of data that will be posted to XSK Rx queue via subtracting xdp_buff::data_end from xdp_buff::data. In bpf_xdp_frags_increase_tail(), when underlying memory type of xdp_rxq_info is MEM_TYPE_XSK_BUFF_POOL, add offset to data_end in tail fragment, so that later on user space will be able to take into account the amount of bytes added by XDP program. Fixes: 24ea50127ecf ("xsk: support mbuf on ZC RX") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-10-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24ice: update xdp_rxq_info::frag_size for ZC enabled Rx queueMaciej Fijalkowski1-14/+23
Now that ice driver correctly sets up frag_size in xdp_rxq_info, let us make it work for ZC multi-buffer as well. ice_rx_ring::rx_buf_len for ZC is being set via xsk_pool_get_rx_frame_size() and this needs to be propagated up to xdp_rxq_info. Use a bigger hammer and instead of unregistering only xdp_rxq_info's memory model, unregister it altogether and register it again and have xdp_rxq_info with correct frag_size value. Fixes: 1bbc04de607b ("ice: xsk: add RX multi-buffer support") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-9-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24intel: xsk: initialize skb_frag_t::bv_offset in ZC driversMaciej Fijalkowski2-2/+4
Ice and i40e ZC drivers currently set offset of a frag within skb_shared_info to 0, which is incorrect. xdp_buffs that come from xsk_buff_pool always have 256 bytes of a headroom, so they need to be taken into account to retrieve xdp_buff::data via skb_frag_address(). Otherwise, bpf_xdp_frags_increase_tail() would be starting its job from xdp_buff::data_hard_start which would result in overwriting existing payload. Fixes: 1c9ba9c14658 ("i40e: xsk: add RX multi-buffer support") Fixes: 1bbc04de607b ("ice: xsk: add RX multi-buffer support") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-8-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24ice: remove redundant xdp_rxq_info registrationMaciej Fijalkowski1-5/+0
xdp_rxq_info struct can be registered by drivers via two functions - xdp_rxq_info_reg() and __xdp_rxq_info_reg(). The latter one allows drivers that support XDP multi-buffer to set up xdp_rxq_info::frag_size which in turn will make it possible to grow the packet via bpf_xdp_adjust_tail() BPF helper. Currently, ice registers xdp_rxq_info in two spots: 1) ice_setup_rx_ring() // via xdp_rxq_info_reg(), BUG 2) ice_vsi_cfg_rxq() // via __xdp_rxq_info_reg(), OK Cited commit under fixes tag took care of setting up frag_size and updated registration scheme in 2) but it did not help as 1) is called before 2) and as shown above it uses old registration function. This means that 2) sees that xdp_rxq_info is already registered and never calls __xdp_rxq_info_reg() which leaves us with xdp_rxq_info::frag_size being set to 0. To fix this misbehavior, simply remove xdp_rxq_info_reg() call from ice_setup_rx_ring(). Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-7-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.