aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2023-12-19nvme: refactor ns info helpersDaniel Wagner4-28/+34
Pass in the nvme_ns_head pointer directly. This reduces the necessity on the caller side have the nvme_ns data structure present. Thus we can refactor the caller side in the next step as well. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-19nvme: move ns id info to struct nvme_ns_headDaniel Wagner5-66/+69
Move the namesapce info to struct nvme_ns_head, because it's the same for all associated namespaces. Note: with multipathing enabled the PI information is shared between all paths. If a path is using a different PI configuration it will overwrite the previous settings. This is obviously not correct and such configuration will be rejected in future. For the time being we expect a correctly configured storage. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-13nvmet: remove cntlid_min and cntlid_max check in nvmet_alloc_ctrlGuixin Liu1-3/+0
The cntlid_min and cntlid_max are checked in configfs, don't check again in nvmet_alloc_ctrl(). Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-13nvmet: allow identical cntlid_min and cntlid_max settingsGuixin Liu1-2/+2
When the user wants to restrict to only creating one controller, they can set cntlid_min and cntlid_max to the same value. Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-06nvme-fabrics: check ioccsz and iorcszGuixin Liu1-0/+14
Make sure that ioccsz and iorcsz returned by target are correct before use it. Per 2.0a base NVMe spec: I/O Queue Command Capsule Supported Size (IOCCSZ): This field defines the maximum I/O command capsule size in 16 byte units. The minimum value that shall be indicated is 4 corresponding to 64 bytes. Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-06nvme: introduce nvme_check_ctrl_fabric_info helperGuixin Liu1-18/+24
Inroduce nvme_check_ctrl_fabric_info helper to check fabric controller info returned by target. Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-01block: skip QUEUE_FLAG_STATS and rq-qos for passthrough ioKundan Kumar2-2/+3
Write-back throttling (WBT) enables QUEUE_FLAG_STATS on the request queue. But WBT does not make sense for passthrough io, so skip QUEUE_FLAG_STATS processing. Also skip rq_qos_issue/done for passthrough io. Overall, the change gives ~11% hike in peak performance. Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com> Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> Link: https://lore.kernel.org/r/20231123190331.7934-1-kundan.kumar@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-01io_uring: remove uring_cmd cookieKeith Busch2-7/+2
No more users of this field. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20231130215309.2923568-5-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-01iouring: remove IORING_URING_CMD_POLLEDKeith Busch1-1/+0
No more users of this flag. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20231130215309.2923568-4-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-01nvme: use bio_integrity_map_userKeith Busch1-168/+29
Map user metadata buffers directly. Now that the bio tracks the metadata, nvme doesn't need special metadata handling and tracking with callbacks and additional fields in the pdu. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20231130215309.2923568-3-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-01block: bio-integrity: directly map user buffersKeith Busch2-2/+225
Passthrough commands that utilize metadata currently need to bounce the user space buffer through the kernel. Add support for mapping user space directly so that we can avoid this costly overhead. This is similar to how the normal bio data payload utilizes user addresses with bio_map_user_iov(). If the user address can't directly be used for reason, like too many segments or address unalignement, fallback to a copy of the user vec while keeping the user address pinned for the IO duration so that it can safely be copied on completion in any process context. Signed-off-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20231130215309.2923568-2-kbusch@meta.com [axboe: fold in fix from Kanchan Joshi] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-11-27block: move a few definitions out of CONFIG_BLK_DEV_ZONEDChristoph Hellwig1-13/+11
Allow using a few symbols with IS_ENABLED instead of #idef by moving the declarations out of #idef CONFIG_BLK_DEV_ZONED, and move bdev_nr_zones into the remaining #idef CONFIG_BLK_DEV_ZONED, #else block below. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231127072002.1332685-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-11-27block/rnbd: use %pe to print errorsSupriti Singh2-13/+13
While printing error, replace %ld by %pe. %pe prints a string whereas %ld would print an error code. Signed-off-by: Supriti Singh <supriti.singh@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com> Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com> Link: https://lore.kernel.org/r/20231124213422.113449-3-haris.iqbal@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-11-27block/rnbd: add support for REQ_OP_WRITE_ZEROESSantosh Pradhan3-8/+18
Remove REQ_OP_WRITE_SAME in favour of REQ_OP_WRITE_ZEROES. Signed-off-by: Santosh Pradhan <santosh.pradhan@ionos.com> Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com> Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com> Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com> Link: https://lore.kernel.org/r/20231124213422.113449-2-haris.iqbal@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-11-26Linux 6.7-rc3Linus Torvalds1-1/+1
2023-11-25parisc: Reduce size of the bug_table on 64-bit kernel by halfHelge Deller2-19/+22
Enable GENERIC_BUG_RELATIVE_POINTERS which will store 32-bit relative offsets to the bug address and the source file name instead of 64-bit absolute addresses. This effectively reduces the size of the bug_table[] array by half on 64-bit kernels. Signed-off-by: Helge Deller <deller@gmx.de>
2023-11-25parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codesHelge Deller3-10/+0
Those return codes are only defined for the parisc architecture and are leftovers from when we wanted to be HP-UX compatible. They are not returned by any Linux kernel syscall but do trigger problems with the glibc strerrorname_np() and strerror() functions as reported in glibc issue #31080. There is no need to keep them, so simply remove them. Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: Bruno Haible <bruno@clisp.org> Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=31080 Cc: stable@vger.kernel.org
2023-11-25parisc: Use natural CPU alignment for bug_tableHelge Deller1-12/+18
Make sure that the __bug_table section gets 32- or 64-bit aligned, depending if a 32- or 64-bit kernel is being built. Mark it non-writeable and use .blockz instead of the .org assembler directive to pad the struct. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+
2023-11-25parisc: Ensure 32-bit alignment on parisc unwind sectionHelge Deller1-0/+1
Make sure the .PARISC.unwind section will be 32-bit aligned. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+
2023-11-25parisc: Mark lock_aligned variables 16-byte aligned on SMPHelge Deller1-1/+1
On parisc we need 16-byte alignment for variables which are used for locking. Mark the __lock_aligned attribute acordingly so that the .data..lock_aligned section will get that alignment in the generated object files. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+
2023-11-25parisc: Mark jump_table naturally alignedHelge Deller1-2/+6
The jump_table stores two 32-bit words and one 32- (on 32-bit kernel) or one 64-bit word (on 64-bit kernel). Ensure that the last word is always 64-bit aligned on a 64-bit kernel by aligning the whole structure on sizeof(long). Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+
2023-11-25parisc: Mark altinstructions read-only and 32-bit alignedHelge Deller1-3/+6
Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+
2023-11-25parisc: Mark ex_table entries 32-bit aligned in uaccess.hHelge Deller1-0/+1
Add an align statement to tell the linker that all ex_table entries and as such the whole ex_table section should be 32-bit aligned in vmlinux and modules. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+
2023-11-25parisc: Mark ex_table entries 32-bit aligned in assembly.hHelge Deller1-0/+1
Add an align statement to tell the linker that all ex_table entries and as such the whole ex_table section should be 32-bit aligned in vmlinux and modules. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+
2023-11-24afs: Mark a superblock for an R/O or Backup volume as SB_RDONLYDavid Howells1-1/+3
Mark a superblock that is for for an R/O or Backup volume as SB_RDONLY when mounting it. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-11-24afs: Fix file locking on R/O volumes to operate in local modeDavid Howells1-0/+2
AFS doesn't really do locking on R/O volumes as fileservers don't maintain state with each other and thus a lock on a R/O volume file on one fileserver will not be be visible to someone looking at the same file on another fileserver. Further, the server may return an error if you try it. Fix this by doing what other AFS clients do and handle filelocking on R/O volume files entirely within the client and don't touch the server. Fixes: 6c6c1d63c243 ("afs: Provide mount-time configurable byte-range file locking emulation") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-11-24afs: Return ENOENT if no cell DNS record can be foundDavid Howells1-0/+10
Make AFS return error ENOENT if no cell SRV or AFSDB DNS record (or cellservdb config file record) can be found rather than returning EDESTADDRREQ. Also add cell name lookup info to the cursor dump. Fixes: d5c32c89b208 ("afs: Fix cell DNS lookup") Reported-by: Markus Suvanto <markus.suvanto@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637 Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-11-24lockdep: Fix block chain corruptionPeter Zijlstra1-1/+2
Kent reported an occasional KASAN splat in lockdep. Mark then noted: > I suspect the dodgy access is to chain_block_buckets[-1], which hits the last 4 > bytes of the redzone and gets (incorrectly/misleadingly) attributed to > nr_large_chain_blocks. That would mean @size == 0, at which point size_to_bucket() returns -1 and the above happens. alloc_chain_hlocks() has 'size - req', for the first with the precondition 'size >= rq', which allows the 0. This code is trying to split a block, del_chain_block() takes what we need, and add_chain_block() puts back the remainder, except in the above case the remainder is 0 sized and things go sideways. Fixes: 810507fe6fd5 ("locking/lockdep: Reuse freed chain_hlocks entries") Reported-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Kent Overstreet <kent.overstreet@linux.dev> Link: https://lkml.kernel.org/r/20231121114126.GH8262@noisy.programming.kicks-ass.net
2023-11-23arm64: add dependency between vmlinuz.efi and ImageMasahiro Yamada1-1/+1
A common issue in Makefile is a race in parallel building. You need to be careful to prevent multiple threads from writing to the same file simultaneously. Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not generate invalid images") addressed such a bad scenario. A similar symptom occurs with the following command: $ make -j$(nproc) ARCH=arm64 Image vmlinuz.efi [ snip ] SORTTAB vmlinux OBJCOPY arch/arm64/boot/Image OBJCOPY arch/arm64/boot/Image AS arch/arm64/boot/zboot-header.o PAD arch/arm64/boot/vmlinux.bin GZIP arch/arm64/boot/vmlinuz OBJCOPY arch/arm64/boot/vmlinuz.o LD arch/arm64/boot/vmlinuz.efi.elf OBJCOPY arch/arm64/boot/vmlinuz.efi The log "OBJCOPY arch/arm64/boot/Image" is displayed twice. It indicates that two threads simultaneously enter arch/arm64/boot/ and write to arch/arm64/boot/Image. It occasionally leads to a build failure: $ make -j$(nproc) ARCH=arm64 Image vmlinuz.efi [ snip ] SORTTAB vmlinux OBJCOPY arch/arm64/boot/Image PAD arch/arm64/boot/vmlinux.bin truncate: Invalid number: 'arch/arm64/boot/vmlinux.bin' make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13: arch/arm64/boot/vmlinux.bin] Error 1 make[2]: *** Deleting file 'arch/arm64/boot/vmlinux.bin' make[1]: *** [arch/arm64/Makefile:163: vmlinuz.efi] Error 2 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:234: __sub-make] Error 2 vmlinuz.efi depends on Image, but such a dependency is not specified in arch/arm64/Makefile. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: SImon Glass <sjg@chromium.org> Link: https://lore.kernel.org/r/20231119053234.2367621-1-masahiroy@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-11-23smb: client: introduce cifs_sfu_make_node()Paulo Alcantara3-120/+52
Remove duplicate code and add new helper for creating special files in SFU (Services for UNIX) format that can be shared by SMB1+ code. Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-11-23smb: client: set correct file type from NFS reparse pointsPaulo Alcantara8-61/+116
Handle all file types in NFS reparse points as specified in MS-FSCC 2.1.2.6 Network File System (NFS) Reparse Data Buffer. The client is now able to set all file types based on the parsed NFS reparse point, which used to support only symlinks. This works for SMB1+. Before patch: $ mount.cifs //srv/share /mnt -o ... $ ls -l /mnt ls: cannot access 'block': Operation not supported ls: cannot access 'char': Operation not supported ls: cannot access 'fifo': Operation not supported ls: cannot access 'sock': Operation not supported total 1 l????????? ? ? ? ? ? block l????????? ? ? ? ? ? char -rwxr-xr-x 1 root root 5 Nov 18 23:22 f0 l????????? ? ? ? ? ? fifo l--------- 1 root root 0 Nov 18 23:23 link -> f0 l????????? ? ? ? ? ? sock After patch: $ mount.cifs //srv/share /mnt -o ... $ ls -l /mnt total 1 brwxr-xr-x 1 root root 123, 123 Nov 18 00:34 block crwxr-xr-x 1 root root 1234, 1234 Nov 18 00:33 char -rwxr-xr-x 1 root root 5 Nov 18 23:22 f0 prwxr-xr-x 1 root root 0 Nov 18 23:23 fifo lrwxr-xr-x 1 root root 0 Nov 18 23:23 link -> f0 srwxr-xr-x 1 root root 0 Nov 19 2023 sock Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-11-23smb: client: introduce ->parse_reparse_point()Paulo Alcantara4-42/+56
Parse reparse point into cifs_open_info_data structure and feed it through cifs_open_info_to_fattr(). Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-11-23smb: client: implement ->query_reparse_point() for SMB1Paulo Alcantara5-175/+113
Reparse points are not limited to symlinks, so implement ->query_reparse_point() in order to handle different file types. Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-11-23cifs: fix use after free for iface while disabling secondary channelsRitvik Budhiraja1-1/+1
We were deferencing iface after it has been released. Fix is to release after all dereference instances have been encountered. Signed-off-by: Ritvik Budhiraja <rbudhiraja@microsoft.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202311110815.UJaeU3Tt-lkp@intel.com/ Signed-off-by: Steve French <stfrench@microsoft.com>
2023-11-23USB: serial: option: add Luat Air72*U series productsAsuna Yang1-0/+3
Update the USB serial option driver support for Luat Air72*U series products. ID 1782:4e00 Spreadtrum Communications Inc. UNISOC-8910 T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4e00 Rev=00.00 S: Manufacturer=UNISOC S: Product=UNISOC-8910 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=400mA I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms If#= 2: AT If#= 3: PPP + AT If#= 4: Debug Co-developed-by: Yangyu Chen <cyy@cyyself.name> Signed-off-by: Yangyu Chen <cyy@cyyself.name> Signed-off-by: Asuna Yang <SpriteOvO@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-11-23tools: ynl: fix duplicate op name in devlinkJakub Kicinski2-1/+7
We don't support CRUD-inspired message types in YNL too well. One aspect that currently trips us up is the fact that single message ID can be used in multiple commands (as the response). This leads to duplicate entries in the id-to-string tables: devlink-user.c:19:34: warning: initialized field overwritten [-Woverride-init] 19 | [DEVLINK_CMD_PORT_NEW] = "port-new", | ^~~~~~~~~~ devlink-user.c:19:34: note: (near initialization for ‘devlink_op_strmap[7]’) Fixes tag points at where the code was generated, the "real" problem is that the code generator does not support CRUD. Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops") Link: https://lore.kernel.org/r/20231123030558.1611831-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23tools: ynl: fix header path for nfsdJakub Kicinski1-1/+1
The makefile dependency is trying to include the wrong header: <command-line>: fatal error: ../../../../include/uapi//linux/nfsd.h: No such file or directory The guard also looks wrong. Fixes: f14122b2c2ac ("tools: ynl: Add source files for nfsd netlink protocol") Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/20231123030624.1611925-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23net: ipa: fix one GSI register field widthAlex Elder1-1/+1
The width of the R_LENGTH field of the EV_CH_E_CNTXT_1 GSI register is 24 bits (not 20 bits) starting with IPA v5.0. Fix this. Fixes: faf0678ec8a0 ("net: ipa: add IPA v5.0 GSI register definitions") Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20231122231708.896632-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23tls: fix NULL deref on tls_sw_splice_eof() with empty recordJann Horn1-0/+3
syzkaller discovered that if tls_sw_splice_eof() is executed as part of sendfile() when the plaintext/ciphertext sk_msg are empty, the send path gets confused because the empty ciphertext buffer does not have enough space for the encryption overhead. This causes tls_push_record() to go on the `split = true` path (which is only supposed to be used when interacting with an attached BPF program), and then get further confused and hit the tls_merge_open_record() path, which then assumes that there must be at least one populated buffer element, leading to a NULL deref. It is possible to have empty plaintext/ciphertext buffers if we previously bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path. tls_sw_push_pending_record() already handles this case correctly; let's do the same check in tls_sw_splice_eof(). Fixes: df720d288dbb ("tls/sw: Use splice_eof() to flush") Cc: stable@vger.kernel.org Reported-by: syzbot+40d43509a099ea756317@syzkaller.appspotmail.com Signed-off-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20231122214447.675768-1-jannh@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23net: axienet: Fix check for partial TX checksumSamuel Holland1-1/+1
Due to a typo, the code checked the RX checksum feature in the TX path. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/20231122004219.3504219-1-samuel.holland@sifive.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23vsock/test: fix SEQPACKET message bounds testArseniy Krasnov1-6/+13
Tune message length calculation to make this test work on machines where 'getpagesize()' returns >32KB. Now maximum message length is not hardcoded (on machines above it was smaller than 'getpagesize()' return value, thus we get negative value and test fails), but calculated at runtime and always bigger than 'getpagesize()' result. Reproduced on aarch64 with 64KB page size. Fixes: 5c338112e48a ("test/vsock: rework message bounds test") Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reported-by: Bogdan Marcynkov <bmarcynk@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23i40e: Fix adding unsupported cloud filtersIvan Vecera1-7/+9
If a VF tries to add unsupported cloud filter through virtchnl then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but this error code is stored in 'ret' instead of 'aq_ret' that is used as error code sent back to VF. In this scenario where one of the mentioned functions fails the value of 'aq_ret' is zero so the VF will incorrectly receive a 'success'. Use 'aq_ret' to store return value and remove 'ret' local variable. Additionally fix the issue when filter allocation fails, in this case no notification is sent back to the VF. Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231121211338.3348677-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23ice: restore timestamp configuration after device resetJacob Keller3-40/+51
The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset() to disable timestamping while the device is resetting. This operation destroys the user requested configuration. While the driver does call ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings after a reset, it unconditionally passes true or false, resulting in failure to restore previous user space configuration. This results in a device reset forcibly disabling timestamp configuration regardless of current user settings. This was not detected previously due to a quirk of the LinuxPTP ptp4l application. If ptp4l detects a missing timestamp, it enters a fault state and performs recovery logic which includes executing SIOCSHWTSTAMP again, restoring the now accidentally cleared configuration. Not every application does this, and for these applications, timestamps will mysteriously stop after a PF reset, without being restored until an application restart. Fix this by replacing ice_ptp_cfg_timestamp() with two new functions: 1) ice_ptp_disable_timestamp_mode() which unconditionally disables the timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release() 2) ice_ptp_restore_timestamp_mode() which calls ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration, calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and issues an immediate TSYN_TX interrupt to ensure that timestamps which may have occurred during the device reset get processed. Modify the ice_ptp_set_timestamp_mode to directly save the user configuration and then call ice_ptp_restore_timestamp_mode. This way, reset no longer destroys the saved user configuration. This obsoletes the ice_set_tx_tstamp() function which can now be safely removed. With this change, all devices should now restore Tx and Rx timestamping functionality correctly after a PF reset without application intervention. Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23ice: unify logic for programming PFINT_TSYN_MSKJacob Keller1-26/+34
Commit d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") modified how Tx timestamps are handled for E822 devices. On these devices, only the clock owner handles reading the Tx timestamp data from firmware. To do this, the PFINT_TSYN_MSK register is modified from the default value to one which enables reacting to a Tx timestamp on all PHY ports. The driver currently programs PFINT_TSYN_MSK in different places depending on whether the port is the clock owner or not. For the clock owner, the PFINT_TSYN_MSK value is programmed during ice_ptp_init_owner just before calling ice_ptp_tx_ena_intr to program the PHY ports. For the non-clock owner ports, the PFINT_TSYN_MSK is programmed during ice_ptp_init_port. If a large enough device reset occurs, the PFINT_TSYN_MSK register will be reset to the default value in which only the PHY associated directly with the PF will cause the Tx timestamp interrupt to trigger. The driver lacks logic to reprogram the PFINT_TSYN_MSK register after a device reset. For the E822 device, this results in the PF no longer responding to interrupts for other ports. This results in failure to deliver Tx timestamps to user space applications. Rename ice_ptp_configure_tx_tstamp to ice_ptp_cfg_tx_interrupt, and unify the logic for programming PFINT_TSYN_MSK and PFINT_OICR_ENA into one place. This function will program both registers according to the combination of user configuration and device requirements. This ensures that PFINT_TSYN_MSK is always restored when we configure the Tx timestamp interrupt. Fixes: d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23ice: remove ptp_tx ring parameter flagJacob Keller3-18/+0
Before performing a Tx timestamp in ice_stamp(), the driver checks a ptp_tx ring variable to see if timestamping is enabled on that ring. This value is set for all rings whenever userspace configures Tx timestamping. Ostensibly this was done to avoid wasting cycles checking other fields when timestamping has not been enabled. However, for Tx timestamps we already get an individual per-SKB flag indicating whether userspace wants to request a timestamp on that packet. We do not gain much by also having a separate flag to check for whether timestamping was enabled. In fact, the driver currently fails to restore the field after a PF reset. Because of this, if a PF reset occurs, timestamps will be disabled. Since this flag doesn't add value in the hotpath, remove it and always provide a timestamp if the SKB flag has been set. A following change will fix the reset path to properly restore user timestamping configuration completely. This went unnoticed for some time because one of the most common applications using Tx timestamps, ptp4l, will reconfigure the socket as part of its fault recovery logic. Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23kselftest/arm64: Fix output formatting for za-forkMark Brown1-1/+1
The za-fork test does not output a newline when reporting the result of the one test it runs, causing the counts printed by kselftest to be included in the test name. Add the newline. Fixes: 266679ffd867 ("kselftest/arm64: Convert za-fork to use kselftest.h") Cc: <stable@vger.kernel.org> # 6.4.x Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20231116-arm64-fix-za-fork-output-v1-1-42c03d4f5759@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-11-23amd-xgbe: propagate the correct speed and duplex statusRaju Rangoju1-3/+8
xgbe_get_link_ksettings() does not propagate correct speed and duplex information to ethtool during cable unplug. Due to which ethtool reports incorrect values for speed and duplex. Address this by propagating correct information. Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23amd-xgbe: handle the corner-case during tx completionRaju Rangoju1-0/+14
The existing implementation uses software logic to accumulate tx completions until the specified time (1ms) is met and then poll them. However, there exists a tiny gap which leads to a race between resetting and checking the tx_activate flag. Due to this the tx completions are not reported to upper layer and tx queue timeout kicks-in restarting the device. To address this, introduce a tx cleanup mechanism as part of the periodic maintenance process. Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23amd-xgbe: handle corner-case during sfp hotplugRaju Rangoju1-1/+13
Force the mode change for SFI in Fixed PHY configurations. Fixed PHY configurations needs PLL to be enabled while doing mode set. When the SFP module isn't connected during boot, driver assumes AN is ON and attempts auto-negotiation. However, if the connected SFP comes up in Fixed PHY configuration the link will not come up as PLL isn't enabled while the initial mode set command is issued. So, force the mode change for SFI in Fixed PHY configuration to fix link issues. Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23net: veth: fix ethtool stats reportingLorenzo Bianconi1-1/+1
Fix a possible misalignment between page_pool stats and tx xdp_stats reported in veth_get_ethtool_stats routine. The issue can be reproduced configuring the veth pair with the following tx/rx queues: $ip link add v0 numtxqueues 2 numrxqueues 4 type veth peer name v1 \ numtxqueues 1 numrxqueues 1 and loading a simple XDP program on v0 that just returns XDP_PASS. In this case on v0 the page_pool stats overwrites tx xdp_stats for queue 1. Fix the issue incrementing pp_idx of dev->real_num_tx_queues * VETH_TQ_STATS_LEN since we always report xdp_stats for all tx queues in ethtool. Fixes: 4fc418053ec7 ("net: veth: add page_pool stats") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c5b5d0485016836448453f12846c7c4ab75b094a.1700593593.git.lorenzo@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.