aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2021-08-14arm64: dts: imx8qxp: update pmu compatiblePeng Fan1-1/+1
i.MX8QXP features four Cortex-A35 cores, use more accurate compatible. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: imx8mm: update pmu compatiblePeng Fan1-1/+1
i.MX8MM features four Cortex-A53 cores, update the compatible to use more accurate "arm,cortex-a53-pmu" Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: ls1046a: fix eeprom entriesRaag Jadav2-13/+2
ls1046afrwy and ls1046ardb boards have CAT24C04[1] and CAT24C05[2] eeproms respectively. Both are 4Kb (512 bytes) in size, and compatible with AT24C04[3]. Remove multi-address entries, as both the boards have a single chip each. [1] https://www.onsemi.com/pdf/datasheet/cat24c01-d.pdf [2] https://www.onsemi.com/pdf/datasheet/cat24c03-d.pdf [3] https://ww1.microchip.com/downloads/en/DeviceDoc/doc0180.pdf Signed-off-by: Raag Jadav <raagjadav@gmail.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: imx8mm-venice-gw7901: enable pull-down on gpio outputsTim Harvey1-3/+3
Enable internal pull-down on UART transceiver GPIO config pins. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: imx8mm-venice-gw7901: add support for USB hub subloadTim Harvey1-3/+4
The USB hub has it's reset as GPIO4_IO17 but can be sub-loaded and VBUS provided by a VBUS regulator with GPIO4_IO2 as the enable and GPIO1_IO15 as the active-low over-current. Enable pull-up for GPIO4_IO17 to keep hub out of reset and move VBUS enable to GPIO4_IO2. Additionally enable pull-up on GPIO1_IO15 so that if the hub is loaded it never over-currents. This allows USB to work in both configurations without a device-tree change. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: imx8mm-venice-gw71xx: fix USB OTG VBUSTim Harvey1-2/+3
The GW71xx has a USB Type-C connector with USB 2.0 signaling. GPIO1_12 is the power-enable to the TPS25821 Source controller and power switch responsible for monitoring the CC pins and enabling VBUS. Therefore GPIO1_12 must always be enabled and the vbus output enable from the IMX8MM can be ignored. To fix USB OTG VBUS enable a pull-up on GPIO1_12 to always power the TPS25821 and change the regulator output to GPIO1_10 which is unconnected. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: imx8mm-venice-gw700x: fix invalid pmic pin configTim Harvey1-8/+0
The GW700x PMIC does not have an interrupt. Remove the invalid pin config. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: imx8mm-venice-gw700x: fix mp5416 pmic configTim Harvey1-19/+37
Fix various MP5416 PMIC configurations: - Update regulator names per dt-bindings - ensure values fit among valid register values - add required regulator-max-microamp property - add regulator-always-on prop Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptionsMartin Kepplinger1-0/+104
Describe the 2 available CSI interfaces on the i.MX8MQ with the MIPI-CSI2 receiver (new driver) and the CSI Bridge that provides the user buffers (existing driver). An image sensor is to be connected to the MIPIs' second port, to be described in board files. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: imx: Add i.mx8mm/imx8mn Gateworks gw7902 dts supportTim Harvey3-0/+1797
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring: - LPDDR4 DRAM - eMMC FLASH - Gateworks System Controller - LTE CAT M1 modem - USB 2.0 HUB - M.2 Socket with USB2.0, PCIe, and dual-SIM - IMX8M FEC - PCIe based GbE - RS232/RS485/RS422 serial transceiver - GPS - CAN bus - WiFi / Bluetooth - MIPI header (DSI/CSI/GPIO/PWM/I2S) - PMIC Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: imx8mp: Add dsp nodeDaniel Baluta1-0/+30
i.MX8 MPlus SoC integrates Cadence HIFI4 DSP. This core runs either a custom firmware or the open source SOF firmware [1] DSP device is handled by SOF OF driver found in sound/soc/sof/sof-of-dev.c Notice that the DSP node makes use of: - dsp_reserved, a reserved memory region for various Audio resources (e.g firmware loading, audio buffers, etc). - Messaging Unit (mu2) for passing notifications betweem ARM core and DSP. [1] https://thesofproject.github.io/latest/platforms/index.html Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: imx8m: Replace deprecated fsl,usbphy DT props with physMarek Vasut2-3/+6
The fsl,usbphy DT property is deprecated, replace it with phys DT property and specify #phy-cells. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: imx8mq-evk: Remove unnecessary blank linesKwon Tae-young1-2/+0
Unnecessary blank lines do NOT help readability, so remove them. Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: imx8mq-evk: add CD pinctrl for usdhc2Kwon Tae-young1-3/+9
Add CD pinctrl for usdhc2. Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: imx8mm-venice-gw7901: Remove unnecessary #address-cells/#size-cellsFabio Estevam1-2/+0
The following dtc build warning is seen with W=1: arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts:291.14-397.4: Warning (avoid_unnecessary_addr_size): /soc@0/bus@30800000/i2c@30a20000/gsc@20: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Remove the unnecessary #address-cells/#size-cells to fix it. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-By: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: imx8: Add jpeg encoder/decoder nodesMirela Rabulea5-0/+109
Add dts for imaging subsytem, include jpeg nodes here. Tested on imx8qxp/qm. Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: imx8qxp-ai_ml: Fix checkpatch warningsKwon Tae-young1-1/+1
Fix the following warnings reported by checkpatch: arch/..../imx8qxp-ai_ml.dts:198: WARNING: please, no space before tabs Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: ls1088ardb: update PHY nodes with IRQ informationIoana Ciornei1-0/+9
Describe the IRQs for both the QSGMII PHYs and the 10GBASE-R PHY found on the LS1088ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: ls2088ardb: update PHY nodes with IRQ informationIoana Ciornei1-0/+4
Update the DTS nodes corresponding to the 4 10GBASE-R PHYs to describe their IRQ lines. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: lx2160ardb: update PHY nodes with IRQ informationIoana Ciornei1-0/+4
Update the DTS nodes for both the AR8035 and the AQR107 PHYs in order to describe their IRQ lines. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-14arm64: dts: imx8mq: add support for MNT Reform2Lucas Stach2-0/+165
This adds a basic devicetree for the MNT Reform2 DIY laptop. Not all of the board periperals are enabled yet, as some of them still require kernel patches to work properly. The nodes for those peripherals will be added as soon as the required patches are upstream. The following has been tested to work: - UART console - SD card - eMMC - Gigabit Ethernet - USB (internal Keyboard, Mouse, external ports) - M.2 PCIe port Co-developed-by: Lukas F. Hartmann <lukas@mntre.com> Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>