aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2023-08-28ALSA: usb-audio: Don't try to submit URBs after disconnectionTakashi Iwai1-13/+27
USB-audio driver can still submit URBs while the device is being disconnected, and it may result in spurious error messages like: usb 1-2: cannot submit urb (err = -19) usb 1-2: Unable to submit urb #0: -19 at snd_usb_queue_pending_output_urbs usb 1-2: cannot submit urb 0, error -19: no device Although those are harmless, they are just ugly. This patch tries to avoid spewing such error messages when the device is already at the disconnected state. It also skips the superfluous xfer notification, too. Link: https://lore.kernel.org/r/20230828101924.27107-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-26ALSA: emu10k1: add separate documentation for E-MU cardsOswald Buddenhagen2-0/+227
They are sufficiently different from Sound Blasters. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230825222157.170978-3-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-26ALSA: emu10k1: more documentation updatesOswald Buddenhagen2-77/+77
- Clarify the data flows. For SB Live! I fixed only the most obvious point ("from" vs. "for"). - Mention 7.1 side channels on Audigy. - Be unspecific about the output DACs on Audigy, as lots of variants actually exist (see emu_chip_details table). Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230825222157.170978-2-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-26ALSA: emu10k1: de-duplicate audigy-mixer.rst vs. sb-live-mixer.rstOswald Buddenhagen1-66/+1
Let the MANUALS/PATENTS section of the former simply refer to the latter - there is no point in duplicating this information with little value to end users. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Link: https://lore.kernel.org/r/20230825222157.170978-1-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-26ALSA: ump: Fix -Wformat-truncation warningsTakashi Iwai1-2/+2
Filling the rawmidi name and substream name can be truncated, and this leads to spurious compiler warnings due to -Wformat-truncation. Although the truncation is the expected behavior, it'd be better to truncate the string within "(...)" This patch puts the precision specifies to each %s for fitting the words within the size-limited strings. Fixes: 5f11dd938fe7 ("ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308251844.1FuQYsql-lkp@intel.com/ Link: https://lore.kernel.org/r/20230826072151.23408-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-25ALSA: hda: Add missing dependency on CONFIG_EFI for Cirrus/TI sub-codecsTakashi Iwai1-0/+3
The CS35L41 and TAS2781 sub-codecs depend on CONFIG_EFI, as they have the code accessing efi variable directly. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308250621.1lwt7PtZ-lkp@intel.com/ Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") Link: https://lore.kernel.org/r/20230825092819.12340-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-25ALSA: doc: Fix missing backquote in midi-2.0.rstTakashi Iwai1-1/+1
Fix the missing missing backquote that caused a sphinx warning: Documentation/sound/designs/midi-2.0.rst:517: WARNING: Inline interpreted text or phrase reference start-string without end-string. Fixes: e240cff9e6e9 ("ALSA: documentation: Add description for USB MIDI 2.0 gadget driver") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/r/20230825152957.18c54ae2@canb.auug.org.au Link: https://lore.kernel.org/r/20230825092351.11780-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-25ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxxFabian Vogt1-0/+8
The LED for the mic mute button is controlled by GPIO2. The mute button LED is slightly more complex, it's controlled by two bits in coeff 0x0b. Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de> Link: https://lore.kernel.org/r/2693091.mvXUDI8C0e@fabians-envy Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-25ALSA: hda/tas2781: Switch back to use struct i2c_driver's .probe()Uwe Kleine-König1-1/+1
struct i2c_driver::probe_new is about to go away. Switch the driver to use the probe callback with the same prototype. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") Link: https://lore.kernel.org/r/20230824200219.9569-1-u.kleine-koenig@pengutronix.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-24ASoC: soc-core.c: Do not error if a DAI link component is not foundCristian Ciocaltea1-5/+5
A recent cleanup of soc_dai_link_sanity_check() is responsible for generating lots of confusing errors before returning -EPROBE_DEFER: acp5x_mach acp5x_mach.0: ASoC: Component acp5x_i2s_dma.0 not found for link acp5x-8821-play [...] acp5x_mach acp5x_mach.0: ASoC: Component spi-VLV1776:00 not found for link acp5x-CS35L41-Stereo [...] acp5x_mach acp5x_mach.0: ASoC: Component spi-VLV1776:01 not found for link acp5x-CS35L41-Stereo Switch back to the initial behaviour of logging those messages on KERN_DEBUG level instead of KERN_ERR. While at it, use the correct form of the verb in 'component_not_find' label. Fixes: 0e66a2c69409 ("ASoC: soc-core.c: cleanup soc_dai_link_sanity_check()") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com Link: https://lore.kernel.org/r/20230824193837.369761-1-cristian.ciocaltea@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org
2023-08-24ASoC: codecs: Fix error code in aw88261_i2c_probe()Harshit Mogalapalli1-1/+1
Passing zero to dev_err_probe is a success which is incorrect when i2c_check_functionality() fails. Fix this by passing -ENXIO instead of zero to dev_err_probe(). Fixes: 028a2ae25691 ("ASoC: codecs: Add aw88261 amplifier driver") Reported-by: kernel test robot <lkp@intel.com Reported-by: Dan Carpenter <error27@gmail.com Closes: https://lore.kernel.org/r/202308150315.CvOTIOKm-lkp@intel.com/ Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com Link: https://lore.kernel.org/r/20230824191722.2701215-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Mark Brown <broonie@kernel.org
2023-08-24ASoC: audio-graph-card.c: move audio_graph_parse_of()Kuninori Morimoto1-71/+68
Current audio-graph-card functions definition are like below (A)' static int graph_get_dais_count(); (B) int audio_graph_parse_of(...) { ... (A) ret = graph_get_dais_count(); ... } (A) static int graph_get_dais_count(...) { ... } (C) We don't need to have (A)' definition if audio_graph_parse_of() (B) was defined at (C). This patch moves (B) to (C). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87r0ntmc3c.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org
2023-08-24ASoC: cs42l43: Use new-style PM runtime macrosCharles Keepax1-4/+3
Update to the newer style PM runtime macros, no functional change. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20230824103902.1606288-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org
2023-08-24ASoC: amd: yc: Fix a non-functional mic on Lenovo 82SJMario Limonciello1-1/+1
Lenovo 82SJ doesn't have DMIC connected like 82V2 does. Narrow the match down to only cover 82V2. Reported-by: prosenfeld@Yuhsbstudents.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217063 Fixes: 2232b2dd8cd4 ("ASoC: amd: yc: Add Lenovo Yoga Slim 7 Pro X to quirks table") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com Link: https://lore.kernel.org/r/20230824011149.1395-1-mario.limonciello@amd.com Signed-off-by: Mark Brown <broonie@kernel.org
2023-08-24ALSA: documentation: Add description for USB MIDI 2.0 gadget driverTakashi Iwai1-0/+188
The USB MIDI 2.0 gadget driver is now supported for 6.6 kernel, and here we show a brief instruction how to enable and use it. Link: https://lore.kernel.org/r/20230824075108.29958-5-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-24ALSA: ump: Don't create unused substreams for static blocksTakashi Iwai2-6/+38
When the UMP Endpoint is declared as "static", that is, no dynamic reassignment of UMP Groups, it makes little sense to expose always all 16 groups with 16 substreams. Many of those substreams are disabled groups, hence they are useless, but applications don't know it and try to open / access all those substreams unnecessarily. This patch limits the number of UMP legacy rawmidi substreams only to the active groups. The behavior is changed only for the static endpoint (i.e. devices without UMP v1.1 feature implemented or with the static block flag is set). Fixes: 0b5288f5fe63 ("ALSA: ump: Add legacy raw MIDI support") Link: https://lore.kernel.org/r/20230824075108.29958-4-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-24ALSA: ump: Fill group names for legacy rawmidi substreamsTakashi Iwai1-0/+15
To make it clearer which legacy substream corresponds to which UMP group, fill the subname field of each substream object with the group number and the endpoint name, e.g. "Group 1 (My Device)". Ideally speaking, we should have some better link information to the derived UMP, but it's another feature extension. Fixes: 0b5288f5fe63 ("ALSA: ump: Add legacy raw MIDI support") Link: https://lore.kernel.org/r/20230824075108.29958-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-24ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPsTakashi Iwai2-7/+10
The legacy rawmidi devices are the shadows of the main UMP devices, hence it's better to initialize them after all UMP Endpoints are parsed. Then, at the moment the legacy rawmidi is created, we already know the static flag or the proper EP name string, and we can fill those information at UMP core side instead of fiddling the attributes at a later point. Fixes: ec362b63c4b5 ("ALSA: usb-audio: Enable the legacy raw MIDI support") Link: https://lore.kernel.org/r/20230824075108.29958-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-24ALSA: ac97: Fix possible error value of *rac97Su Hui1-3/+2
Before committing 79597c8bf64c, *rac97 always be NULL if there is an error. When error happens, make sure *rac97 is NULL is safer. For examble, in snd_vortex_mixer(): err = snd_ac97_mixer(pbus, &ac97, &vortex->codec); vortex->isquad = ((vortex->codec == NULL) ? 0 : (vortex->codec->ext_id&0x80)); If error happened but vortex->codec isn't NULL, this may cause some problems. Move the judgement order to be clearer and better. Fixes: 79597c8bf64c ("ALSA: ac97: Fix possible NULL dereference in snd_ac97_mixer") Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Su Hui <suhui@nfschina.com> Link: https://lore.kernel.org/r/20230823025212.1000961-1-suhui@nfschina.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-24ALSA: pcmtest: Add support for pcm pausingIvan Orlov1-8/+41
Add pause push/release support to the virtual PCM test driver. Add 'suspend' boolean field to the pcmtst_buf_iter structure, so we can pause the timer without shutting it down. Update the trigger callback handler correspondingly. Extract buffer initialization to the 'reset_buf_iterator' function since it is used in multiple places now. Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Link: https://lore.kernel.org/r/20230822150541.8450-1-ivan.orlov0322@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-24ALSA: hda/realtek: Add quirk for HP Victus 16-d1xxx to enable mute LEDSungHwan Jung1-0/+22
This quirk enables mute LED on HP Victus 16-d1xxx (8A25) laptops, which use ALC245 codec. Signed-off-by: SungHwan Jung <onenowy@gmail.com> Link: https://lore.kernel.org/r/20230823114051.3921-1-onenowy@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-24ALSA: hda: cs35l41: Override the _DSD for HP Zbook Fury 17 G9 to correct boost typeStefan Binding1-0/+32
CS35L41 HDA driver requires ACPI to contain correct _DSD properties to correctly configure the device. Whilst the HP Zbook Fury 17 G9 contains valid _DSD properties, the boost type has been configured incorrectly in the _DSD for this laptop. We can override these properties to fix the boost type. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230823143956.755758-1-sbinding@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-23ASoC: cs42l43: Initialize ret in default case in cs42l43_pll_ev()Nathan Chancellor1-0/+1
clang warns (or errors with CONFIG_WERROR=y): sound/soc/codecs/cs42l43.c:1371:2: error: variable 'ret' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized] 1371 | default: | ^~~~~~~ sound/soc/codecs/cs42l43.c:1377:9: note: uninitialized use occurs here 1377 | return ret; | ^~~ sound/soc/codecs/cs42l43.c:1349:9: note: initialize the variable 'ret' to silence this warning 1349 | int ret; | ^ | = 0 1 error generated. Initialize ret to 0 in the default case, as there was nothing to do for other event types. Closes: https://github.com/ClangBuiltLinux/linux/issues/1922 Fixes: fc918cbe874e ("ASoC: cs42l43: Add support for the cs42l43") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20230823-cs42l43_pll_ev-init-ret-v1-1-5836f1ad5dad@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: audio-graph-card2: add comment for format propertyKuninori Morimoto2-0/+19
We don't need to have "format" property on DT any more if CPU/Codec driver has .auto_selectable_formats settings on snd_soc_dai_ops. The sample dtsi doesn't have it. To avoid user confusion, this patch indicates it on comment. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87edjuzk2p.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ALSA: ymfpci: Fix the missing snd_card_free() call at probe errorTakashi Iwai1-2/+8
Like a few other drivers, YMFPCI driver needs to clean up with snd_card_free() call at an error path of the probe; otherwise the other devres resources are released before the card and it results in the UAF. This patch uses the helper for handling the probe error gracefully. Fixes: f33fc1576757 ("ALSA: ymfpci: Create card with device-managed snd_devm_card_new()") Cc: <stable@vger.kernel.org> Reported-and-tested-by: Takashi Yano <takashi.yano@nifty.ne.jp> Closes: https://lore.kernel.org/r/20230823135846.1812-1-takashi.yano@nifty.ne.jp Link: https://lore.kernel.org/r/20230823161625.5807-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-23ASoC: dwc: i2s: Add StarFive JH7110 SoC supportXingyu Wu3-21/+287
Add StarFive JH7110(TX0/TX1/RX channels) SoC support in the designware I2S driver and a flag to check if it is on the JH7110 SoC. These channels need to enable clocks, resets and syscon register on the JH7110 SoC. So add init ops in platform data for the JH7110 SoC to do this. Their resets should be deassert before changing the parent of clocks so these are done in the init ops of platform data. The I2S controllers use DMA controller by platform data on the JH7110 and their settings about snd_dmaengine_dai_dma_data() should be added in the dw_configure_dai_by_pd(). And use dmaengine PCM registration if these do not have IRQ on the JH7110 SoC. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> Link: https://lore.kernel.org/r/20230821144151.207339-4-xingyu.wu@starfivetech.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: dwc: Use ops to get platform dataXingyu Wu1-1/+1
Use of_device_get_match_data() to get platform data. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> Link: https://lore.kernel.org/r/20230821144151.207339-3-xingyu.wu@starfivetech.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: dt-bindings: snps,designware-i2s: Add StarFive JH7110 SoC supportXingyu Wu1-3/+105
Add the StarFive JH7110 (TX0/TX1/RX channel) SoC support in the bindings of Designware I2S controller. The I2S controller needs two reset items to work properly on the JH7110 SoC. And TX0 channel as master mode needs 5 clock items and TX1/RX channels as slave mode need 9 clock items on the JH7110 SoC. The RX channel needs System Register Controller property to enable it and other platforms do not need it. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230821144151.207339-2-xingyu.wu@starfivetech.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: rsnd: setup BRGCKR/BRRA/BRRB on rsnd_adg_clk_control()Kuninori Morimoto1-2/+7
Current adg.c will configure BRGCKR/BRRA/BRRB to output clock when it start sound. OTAH, rsnd_adg_clk_enable() will enables clk_a/b/c when driver was probed. But it is strange, these should be set in the same time. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87h6oqzlei.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: rsnd: remove default division of clock outKuninori Morimoto1-9/+6
Current adg has default division for BRRA/BRRB, but it was created at very beginning of the driver implementation, and is now an unnecessary settings. Because it has this default division, unexpected clockout might be selected. For example if it requests only 44.1kHz base clockout, unrequested 48kHz base clockout also will be selected. This patch remove default division of clock out Reported-by: Vincenzo De Michele <vincenzo.michele@davinci.de> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87il96zlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: rsnd: tidyup brga/brgb default valueKuninori Morimoto1-2/+2
default value for brga/brgb should be 0xff instead of 0x2. This patch tidyup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87jztmzlew.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: rsnd: setup clock-out only when all conditions are rightKuninori Morimoto1-0/+4
Current adg.c doesn't assume that requested clock out divide condition doesn't match. In such case, it will indicate strange message, and will register NULL clock, etc. It is just a DT setting miss, but is confusable. This patch check all conditions for it. Reported-by: Vincenzo De Michele <vincenzo.michele@davinci.de> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87lee2zlf7.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: rsnd: enable clk_i approximate rate usageKuninori Morimoto1-0/+36
Basically Renesas sound ADG is assuming that it has accurately divisible input clock. But sometimes / some board might not have it. The clk_i from CPG is used for such case. It can't calculate accurate division, but can be used as approximate rate. This patch enable clk_i for such case. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Adnan Ali <adnan.ali@bp.renesas.com> Tested-by: Vincenzo De Michele <vincenzo.michele@davinci.de> Tested-by: Patrick Keil <patrick.keil@conti-engineering.com> Link: https://lore.kernel.org/r/87msyizlfd.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: nau8821: Improve AMIC recording performance.Seven Lee2-1/+66
Since the hardware may be designed as a single-ended input, the headset mic record only supports single-ended input on the left side. This patch will enhance microphone recording performance for single-end. Signed-off-by: Seven Lee <wtli@nuvoton.com> Link: https://lore.kernel.org/r/20230823071244.1861487-2-wtli@nuvoton.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: dt-bindings: nau8821: Add single-ended input featureSeven Lee1-0/+7
Add input with single-ended control. Signed-off-by: Seven Lee <wtli@nuvoton.com> Link: https://lore.kernel.org/r/20230823071244.1861487-1-wtli@nuvoton.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: Delete UDA134x/L3 audio codecLinus Walleij7-816/+0
This codec was used by the deleted S3C board sound/soc/samsung/s3c24xx_uda134x.c. Fixes: 503278c12701 ("ASoC: samsung: remove unused drivers") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230822-delete-l3-v2-1-b3ffc07348af@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: clear dsp to host interrupt statusVijendar Mukunda1-3/+3
DSP_SW_INTR_STAT_OFFSET is a common interrupt register which will be accessed by both ACP firmware and driver. This register contains register bits corresponds to host to dsp interrupts and vice versa. when dsp to host interrupt is reported, only clear dsp to host interrupt bit in DSP_SW_INTR_STAT_OFFSET. Fixes: 2e7c6652f9b8 ("ASoC: SOF: amd: Fix for handling spurious interrupts from DSP") Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-7-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: clear panic mask status when panic occursVijendar Mukunda1-0/+4
Due to scratch memory persistence, Once the DSP panic is reported, need to clear the panic mask after handling DSP panic. Otherwise, It results in DSP panic on next reboot. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-6-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: add conditional check for acp_clkmux_sel registerVijendar Mukunda1-1/+3
Few AMD platforms require ACP ACLK as clock source. Add conditional check for clock mux selection register for switching between internal clock and ACP ACLK. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-5-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: remove redundant clock mux selection register writeVijendar Mukunda1-7/+1
ACP clock mux selection register is already programmed during acp init sequence. Remove the redundant register write. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-4-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: add module parameter for firmware debugVijendar Mukunda3-1/+8
Add module parameter for firmware debug. If firmware debug flag is enabled, clear the fusion stall bit which is required for enabling firmware debugging through JTAG. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-3-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: enable ACP external global interruptVijendar Mukunda2-0/+4
Previously ACP SOF firmware used to enable the ACP external global interrupt register. This will restrict to report ACP host interrupts only after firmware loading is successful. This register needs to be set from host driver to handle other ACP interrupts(SoundWire Interrupts) before loading the ACP firmware. Add field for external interrupt enable register in acp descriptor structure and enable the external interrupt enable register. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-2-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: remove unused sha dma interrupt codeVijendar Mukunda1-8/+1
During initial development time for RN platform, when SHA dma gets completed, SHA DMA engine used to raise the ACP interrupt. In ACP interrupt handler, SHA DMA interrupt got handled. Currently SHA DMA compleition is verified by checking transfer count using read poll time out logic. Remove unused SHA dma interrupt handling code. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-1-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: cs35l41: Correct amp_gain_tlv valuesCharles Keepax1-1/+1
The current analog gain TLV seems to have completely incorrect values in it. The gain starts at 0.5dB, proceeds in 1dB steps, and has no mute value, correct the control to match. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230823085308.753572-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-22ASoC: fsl: merge DAI call back functions into opsKuninori Morimoto1-1/+1
ALSA SoC merges DAI call backs into .ops. This patch merge these into one. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308152047.psX1QNDh-lkp@intel.com/ Cc: Randy Dunlap <rdunlap@infradead.org> Fixes: 446b31e89493 ("ASoC: soc-dai.h: remove unused call back functions") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/87a5ujubj0.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-22ASoC: SOF: ipc4-topology: Add module parameter to ignore the CPC valuePeter Ujfalusi1-3/+23
Add a new module parameter ipc4_ignore_cpc which can be used to force the kernel to ignore the queried CPC value for all firmware modules and use 0 instead. The CPC lookup is still done to report missing configurations and the debug print is going to be different to be explicit that the CPC is ignored and what was the value we would have used. The CPC value is sent to the firmware with the MOD_INIT_INSTANCE message and it is used by the firmware as a parameter for clock scaling. The flag is intended to be used only when there is a need to validate the firmware behavior regarding to clock scaling since the 0 CPC value will force the DSP to run in full speed, disabling the scaling and provides additional counter point to rule out clock management related issues. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20230822065419.24374-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-22ASoC: pxa: merge DAI call back functions into opsKuninori Morimoto1-2/+2
ALSA SoC merges DAI call backs into .ops. This patch merge these into one. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308151142.hoM5o9LV-lkp@intel.com/ Fixes: 446b31e89493 ("ASoC: soc-dai.h: remove unused call back functions") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/878ra3ubid.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-21ASoC: rt5640: fix typosSenhong Liu1-2/+2
I noticed typos and i fixed them. Signed-off-by: Senhong Liu <liusenhong2022@email.szu.edu.cn> Link: https://lore.kernel.org/r/20230819133345.39961-1-liusenhong2022@email.szu.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-21ASoC: SOF: amd: Enable signed firmware image loading for Vangogh platformVenkata Prasad Potturu3-0/+40
Enable signed firmware loading for Vangogh platform using dmi quirks. Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://lore.kernel.org/r/20230809123534.287707-3-venkataprasad.potturu@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-21ASoC: SOF: amd: Add support for signed fw image loadingVenkata Prasad Potturu4-3/+51
Add support for signed firmware code bin and data bin loading for amd platforms. Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com> Link: https://lore.kernel.org/r/20230809123534.287707-2-venkataprasad.potturu@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.