aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2021-04-07ARM: dts: mvebu: Add device tree for ATL-x530 BoardAryan Srivastava2-0/+236
Add device tree file for x530 board. This has an Armada 385 SoC. Has NAND-flash for user storage and SPI for booting. Covers majority of x530 and GS980MX variants. Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-04-07ARM: dts: clps711x: Add an empty chosen node to top level DTSIAlexander Shiyan1-0/+2
Missing "chosen" node can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-5-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: edb7211: Add unit-address to memory nodeAlexander Shiyan1-1/+1
The memory node requires a unit-address, add it. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-4-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: Fix serial port namesAlexander Shiyan1-2/+2
Preferred node name for serial ports is "serial". Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-3-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: Add keypad nodeAlexander Shiyan1-0/+7
This adds missing keypad node to basic clps711x DT. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-2-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: Add SYSCON nodes where it is usedAlexander Shiyan1-0/+4
This patch adds SYSCON descriptors to framebuffer, SPI, DAI and modem control GPIO nodes to further rework these drivers to remove the call to the syscon_regmap_lookup_by_compatible() function. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-1-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: at91: sama5d2: add ETB and ETM unit nameNicolas Ferre1-2/+2
Add unit address to the ETB and ETM nodes. It also allow us to get rid of the warnings: ../arch/arm/boot/dts/sama5d2.dtsi:43.6-57.4: Warning (unit_address_vs_reg): /etb: node has a reg or ranges property, but no unit name ../arch/arm/boot/dts/sama5d2.dtsi:59.6-73.4: Warning (unit_address_vs_reg): /etm: node has a reg or ranges property, but no unit name when we compile with W=1. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210402170139.140595-1-nicolas.ferre@microchip.com
2021-04-07ARM: dts: at91: change the key code of the gpio keyLudovic Desroches9-9/+18
Having a button code and not a key code causes issues with libinput. udev won't set ID_INPUT_KEY. If it is forced, then it causes a bug within libinput. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210402130227.21478-1-nicolas.ferre@microchip.com
2021-04-05arm64: dts: meson: add initial device-tree for MeCool KIII ProChristian Hewitt2-0/+114
MeCool (Videostrong) KIII Pro is based on the Amlogic Q200 reference board with an S912 chip and the following specs: - 3GB DDR3 RAM - 16GB eMMC - 10/100/1000 Base-T Ethernet - BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0) - DVB-C/T/T2/S/S2 (AVL6862TA demod + R912 tuner) - HDMI 2.0a video - S/PDIF optical output - CVBS/Analogue output - 4x USB 2.0 ports - IR receiver - 1x Power button (with integrated blue LED) - 1x Update/Reset button (underside) - 1x micro SD card slot Tested-by: Drazen Spio <drazsp@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210402064521.30579-4-christianshewitt@gmail.com
2021-04-05arm64: dts: meson: add initial device-tree for MeCool KII ProChristian Hewitt2-0/+87
MeCool (Videostrong) KII Pro is based on the Amlogic P230 reference board with an S905D chip and the following specs: - 2GB DDR3 RAM - 16GB eMMC - 10/100 Base-T Ethernet - BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0) - DVB-C/T/T2/S/S2 (AVL6862TA demod + R848 tuner) - HDMI 2.0a video - S/PDIF optical output - CVBS/Analogue output - 4x USB 2.0 ports - IR receiver - 1x Power button (with integrated blue LED) - 1x micro SD card slot Tested-by: Drazen Spio <drazsp@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210402064521.30579-3-christianshewitt@gmail.com
2021-04-05dt-bindings: arm: amlogic: add MeCool KII/KIII Pro bindingsChristian Hewitt1-0/+2
Add the board bindings for the MeCool (Videostrong Technology Co., Ltd) KII-Pro (S905D) and KIII-Pro (S912) devices. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210402064521.30579-2-christianshewitt@gmail.com
2021-04-02arm64: dts: marvell: enable CP110 UTMI PHY usageKonstantin Porotchkin6-14/+72
Enable support for CP110 UTMI PHY in Armada SoC family platform device trees. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-04-02arm64: dts: marvell: add support for Marvell CP110 UTMI PHYKonstantin Porotchkin1-0/+19
Add support for Marvell CP110 UTMI PHY in a CP11x DTSI Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-04-02arm64: dts: marvell: armada-37xx: add syscon compatible to NB clk nodeMarek Behún1-1/+2
Add "syscon" compatible to the North Bridge clocks node to allow the cpufreq driver to access these registers via syscon API. This is needed for a fix of cpufreq driver. Signed-off-by: Marek Behún <kabel@kernel.org> Fixes: e8d66e7927b2 ("arm64: dts: marvell: armada-37xx: add nodes...") Cc: stable@vger.kernel.org Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-04-02arm64: dts: marvell: clearfog-gt-8k: add cooling mapsRussell King1-1/+121
Add cooling maps suitable for a Noctua NF-A4/10 fan attached to the heat sink. The fan will toggle between two speeds in operation which seems to be normal behaviour. More fine-grained steps may help to reduce this. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-04-02arm64: dts: marvell: clearfog-gt-8k: add pwm-fanRussell King1-0/+7
Add pwm-fan support for controlling the fan speed. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-04-02ARM: dts: at91: Fix a typoBhaskar Chowdhury1-1/+1
s/conlicts/conflicts/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210318095237.28436-1-unixbhaskar@gmail.com
2021-04-02arm64: dts: renesas: ulcb: Add cpu-supply property to a57_0 nodeYusuke Goda1-0/+4
Add the cpu-supply property to the a57_0 node, so Dynamic Voltage and Frequency Scaling (DVFS) can change the CPU core voltage. Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210326105009.1574424-3-geert+renesas@glider.be
2021-04-02arm64: dts: renesas: salvator-common: Add cpu-supply property to a57_0 nodeDien Pham1-0/+4
Add the cpu-supply property to the a57_0 node, so Dynamic Voltage and Frequency Scaling (DVFS) can change the CPU core voltage. Signed-off-by: Dien Pham <dien.pham.ry@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210326105009.1574424-2-geert+renesas@glider.be
2021-04-02arm64: dts: renesas: r8a77950: Drop operating points above 1.5 GHzGeert Uytterhoeven1-0/+5
The higher operating frequencies for the Cortex-A57 CPU cores, which were first documented in the R-Car Gen3 Hardware User's Manual revision 0.54, apply to R-Car H3 ES2.0 (r8a77951). Play it safe and restrict R-Car H3 ES1.x to 1.5 GHz, by removing the "turbo-mode" entries from the operating points table inherited from r8a77951.dtsi. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210311110552.3124180-1-geert+renesas@glider.be
2021-04-01arm64: dts: ti: k3-am64-main: Fix ospi compatiblePratyush Yadav1-1/+1
The TI specific compatible should be followed by the generic "cdns,qspi-nor" compatible. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20210326130034.15231-4-p.yadav@ti.com
2021-04-01arm64: dts: ti: k3-j7200-mcu: Fix ospi compatiblePratyush Yadav1-1/+1
The TI specific compatible should be followed by the generic "cdns,qspi-nor" compatible. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20210326130034.15231-3-p.yadav@ti.com
2021-04-01arm64: dts: ti: k3-j721e-mcu: Fix ospi compatiblePratyush Yadav1-2/+2
The TI specific compatible should be followed by the generic "cdns,qspi-nor" compatible. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20210326130034.15231-2-p.yadav@ti.com
2021-04-01ARM: mstar: Add mpll to base dtsiDaniel Palmer1-0/+8
All of the currently known MStar/SigmaStar ARMv7 SoCs have at least one MPLL and it seems to always be at the same place so add it to the base dtsi. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20210301123542.2800643-4-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01ARM: mstar: Add the external clocks to the base dstiDaniel Palmer1-0/+15
All of the currently known MStar/SigmaStar ARMv7 SoCs have an "xtal" clock input that is usually 24MHz and an "RTC xtal" that is usually 32KHz. The xtal input has to be connected to something so it's enabled by default. The MSC313 and MSC313E do not bring the RTC clock input out to the pins so it's impossible to connect it. The SSC8336 does bring the input out to the pins but it's not always actually connected to something. The RTC node needs to always be present because in the future the nodes for the clock muxes will refer to it even if it's not usable. The RTC node is disabled by default and should be enabled at the board level if the RTC input is wired up. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20210301123542.2800643-3-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01ARM: mstar: Select MSTAR_MSC313_MPLLDaniel Palmer1-0/+1
All of the ARCH_MSTARV7 chips have an MPLL as the source for peripheral clocks so select MSTAR_MSC313_MPLL. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20210301123542.2800643-2-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01ARM: dts: stm32: Add PTP clock to Ethernet controllerKurt Kanzenbach1-0/+2
Add the PTP clock to the Ethernet controller. Otherwise, the driver uses the main clock to derive the PTP frequency which is not necessarily the correct one. Tested with linuxptp on Olimex STMP1-OLinuXino-LIME2. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01arm64: dts: mediatek: fix reset GPIO level on pumpkinFabien Parent1-1/+1
The tca6416 chip is active low. Fix the reset-gpios value. Fixes: e2a8fa1e0faa ("arm64: dts: mediatek: fix tca6416 reset GPIOs in pumpkin") Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/20210223221826.2063911-1-fparent@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-04-01arm64: dts: mt8183: add mt8183 pumpkin boardFabien Parent2-0/+379
The MT8183 Pumpkin board is manufactured by OLogic and includes a MediaTek MT8183 SoC with 2GB of RAM. The board provides the following IOs: * 2 USB Type-A ports * Ethernet * Serial UART over micro-USB port * 1 USB Type-C dual role port * 1 USB Type-C power only port * 1 Jack for audio * RPI compatible header * MT7668 wiresless chip with Wi-Fi AC and BT 5 * Micro-HDMI port * 2 connectors for CSI cameras * 1 connector for DSI display * 1 JTAG port Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/20210217205945.830006-2-fparent@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-04-01dt-bindings: arm64: dts: mediatek: Add mt8183-pumpkin boardFabien Parent1-0/+4
Add binding documentation for the MT8183 Pumpkin board. Signed-off-by: Fabien Parent <fparent@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210217205945.830006-1-fparent@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-04-01ARM: dts: stm32: Enable crc1 and cryp1 where applicable on DHSOMMarek Vasut5-0/+20
Enable the CRC accelerator on all STM32MP15xx DHSOM based systems and CRYP accelerator on all STM32MP15x[CF] DHSOM based systems. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01ARM: dts: stm32: Update GPIO line names on PicoITXMarek Vasut1-6/+6
Use more specific custom GPIO line names which denote exactly where the GPIO came from, i.e. the base board. Also, update the new blank GPIO line names set up by stm32mp15xx-dhcom-som.dtsi back to their original values. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01ARM: dts: stm32: Update GPIO line names on DRC02Marek Vasut1-6/+6
Use more specific custom GPIO line names which denote exactly where the GPIO came from, i.e. the base board. Also, update the new blank GPIO line names set up by stm32mp15xx-dhcom-som.dtsi back to their original values. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01ARM: dts: stm32: Fill GPIO line names on AV96Marek Vasut1-0/+35
Fill in the custom GPIO line names used by DH. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01ARM: dts: stm32: Fill GPIO line names on DHCOM SoMMarek Vasut1-0/+60
Fill in the custom GPIO line names used by DH on the DHCOM SoM. The GPIO line names are in accordance to DHCOM Design Guide R04 available at [1], section 3.9 GPIO. [1] https://wiki.dh-electronics.com/images/5/52/DOC_DHCOM-Design-Guide_R04_2018-06-28.pdf Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties'dillon min1-1/+2
To use additional properties 'bluetooth' on serial, need replace false with 'type: object' for 'additionalProperties' to make it as a node, else will run into dtbs_check warnings. 'arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800: 'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: af1c2d81695b ("dt-bindings: serial: Convert STM32 UART to json-schema") Reported-by: kernel test robot <lkp@intel.com> Tested-by: Valentin Caron <valentin.caron@foss.st.com> Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1616757302-7889-8-git-send-email-dillon.minfei@gmail.com Signed-off-by: dillon min <dillon.minfei@gmail.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01ARM: stm32: Add a new SoC - STM32H750dillon min1-0/+1
The STM32H750 is a Cortex-M7 MCU running at 480MHz and containing 128KBytes internal flash, 1MiB SRAM. Signed-off-by: dillon min <dillon.minfei@gmail.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6dillon min4-0/+325
This patchset has following changes: - introduce stm32h750.dtsi to support stm32h750 value line - add pin groups for usart3/uart4/spi1/sdmmc2 - add stm32h750i-art-pi.dtb (arch/arm/boot/dts/Makefile) - add stm32h750-art-pi.dts to support art-pi board art-pi board component: - 8MiB qspi flash - 16MiB spi flash - 32MiB sdram - ap6212 wifi&bt&fm the detail board information can be found at: https://art-pi.gitee.io/website/ Signed-off-by: dillon min <dillon.minfei@gmail.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01ARM: dts: stm32: fix i2c node typo in stm32h743Alexandre Torgue1-2/+2
Replace upper case by lower case in i2c nodes name. Signed-off-by: dillon min <dillon.minfei@gmail.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01ARM: dts: stm32: add new instances for stm32h743 MCUAlexandre Torgue1-0/+31
Some instances are missing in current support of stm32h743 MCU. This commit adds usart3/uart4 and sdmmc2 support. Signed-off-by: dillon min <dillon.minfei@gmail.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750dillon min5-308/+330
This patch is intend to add support stm32h750 value line, just add stm32h7-pinctrl.dtsi for extending, with following changes: - rename stm32h743-pinctrl.dtsi to stm32h7-pinctrl.dtsi - move 'pin-controller' from stm32h7-pinctrl.dtsi to stm32h743.dtsi, to fix make dtbs_check warrnings arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: soc: 'i2c@40005C00', 'i2c@58001C00' do not match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$', 'pinctrl-[0-9]+' Signed-off-by: dillon min <dillon.minfei@gmail.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01dt-bindings: arm: stm32: Add compatible strings for ART-PI boarddillon min1-0/+4
Art-pi based on stm32h750xbh6, with following resources: -8MiB QSPI flash -16MiB SPI flash -32MiB SDRAM -AP6212 wifi, bt, fm detail information can be found at: https://art-pi.gitee.io/website/ Signed-off-by: dillon min <dillon.minfei@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-04-01Documentation: arm: stm32: Add stm32h750 value line docdillon min2-0/+35
This patchset add support for soc stm32h750, stm32h750 has mirror different from stm32h743 item stm32h743 stm32h750 flash size: 2MiB 128KiB adc: none 3 crypto-hash: none aes/hamc/des/tdes/md5/sha detail information can be found at: https://www.st.com/en/microcontrollers-microprocessors/stm32h750-value-line.html Signed-off-by: dillon min <dillon.minfei@gmail.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2021-03-31arm64: dts: amlogic: Assign a fixed index to mmc devicesAlexander Stein2-0/+12
Recently introduced async probe on mmc devices can shuffle block IDs. Pin them to fixed values to ease booting in environments where UUIDs are not practical. Use newly introduced aliases for mmcblk devices from [1]. [1] https://patchwork.kernel.org/patch/11747669/ Commit message taken from commit 0011c6d18277 ("arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.") The unconventional order (B, C, A) is due to the fact that sd_emmc_a is (according to the comments) only used for SDIO. AFAICS all boards either have both sd_emmc_b and sd_emmc_c or only one of them enabled. So the alias order should match the previous non-async order for all of them. Signed-off-by: Alexander Stein <alexander.stein@mailbox.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210203192824.854491-1-alexander.stein@mailbox.org
2021-03-31arm64: dts: mt8183: Add kukui kodama boardHsin-Yi Wang6-0/+431
kodama is also known as Lenovo 10e Chromebook Tablet. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Link: https://lore.kernel.org/r/20210331091327.1198529-4-hsinyi@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-03-31arm64: dts: mt8183: Add kukui kakadu boardNicolas Boichat3-0/+392
Kakadu is also known as ASUS Chromebook Detachable CM3. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Link: https://lore.kernel.org/r/20210331091327.1198529-3-hsinyi@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-03-31dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-kodamaHsin-Yi Wang1-0/+9
Kodama is also known as Lenovo 10e Chromebook Tablet. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Link: https://lore.kernel.org/r/20210331091327.1198529-2-hsinyi@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-03-31dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-kakaduHsin-Yi Wang1-0/+6
Kakadu is also known as ASUS Chromebook Detachable CM3. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Link: https://lore.kernel.org/r/20210331091327.1198529-1-hsinyi@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-03-31ARM: dts: am335x-boneblack.dts: unique gpio-line-namesDrew Fustini1-66/+66
Based on linux-gpio discussion [1], it is best practice to make the gpio-line-names unique. Generic names like "[ethernet]" are replaced with the name of the unique signal on the AM3358 SoC ball corresponding to the gpio line. "[NC]" is also renamed to the standard "NC" name to represent "not connected". [1] https://lore.kernel.org/linux-gpio/20201216195357.GA2583366@x1/ Signed-off-by: Drew Fustini <drew@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-03-30arm64: dts: intel: adjust qpsi read-delay propertyDinh Nguyen1-1/+1
The "cnds,read-delay" value needs to be 2 for the Agilex devkit. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.