aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-02-29ARM: dts: imx6ul: move dt-bindings/input/input.h include to dtsi fileLothar Waßmann2-1/+1
imx6ul.dtsi references the macro 'KEY_POWER' from dt-bindings/input/input.h. Thus, move the include statement for this file from imx6ul-14x14-evk.dts to imx6ul.dtsi itself. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx6ul: move tsc node to appropriate place in the DTBLothar Waßmann1-11/+11
Move the tsc node to keep the nodes sorted in ascending order by unit address. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx51: remove bogus pin definitionLothar Waßmann1-1/+0
Pad DISPB2_SER_RS has no function DISP1_EXT_CLK. The definition is obviusly a copy/paste error from MX51_PAD_DISPB2_SER_RS__DISP1_PIN16. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx6ul: add missing input_sel config for various pinsLothar Waßmann1-45/+45
Various pads are missing the input_sel offset and value. Fix this. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx6ul: whitespace cleanup; no functional changeLothar Waßmann1-918/+918
Remove whitespace before TAB in indentation and reduce indentation level to improve readability. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: colibri-vf: Add pinmux for UART_0 aka UART_A RTS/CTS pinsBhuvanchandra DV1-0/+2
Add pinmux for UART_A RTS, CTS pin's. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: vf610: add performance monitoring unitStefan Agner1-0/+9
All Freescale Vybrid SoC include a Cortex-A5 core which supports ARM's standard PMU (performance monitoring unit). Include the monitoring unit into the Cortex-A5 base device tree vf500.dtsi. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: vf-colibri: disable write-protection for SD-cardStefan Agner1-0/+1
The Colibri standard does not define a pin for SD-Card write- protection. Use the disable-wp property to indicate that there is no physical WP line present. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx6: Use correct SDMA script for SPI coresSascha Hauer1-4/+4
According to the reference manual the shp_2_mcu / mcu_2_shp scripts must be used for devices connected through the SPBA. This fixes an issue we saw with DMA transfers from SPI NOR Flashes. Sometimes the SPI controller RX FIFO was not empty after a DMA transfer and the driver got stuck in the next PIO transfer when it read one word more than expected. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: vf-colibri: add carrier boards 3.3V supplyStefan Agner1-0/+12
Add the carrier boards 3.3V supply as fixed regulator. This allows to specify the power supply for nodes like backlight. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: vf-colibri: add basic supply regulatorsStefan Agner1-0/+17
Colibri modules need to be powered using the power pins 3V3 and AVDD_AUDIO. Add fixed regulators which represent this power rails. Potentially, those power rails could be switched on a carrier board. A carrier board device tree could add a own regulator with a GPIO, and reference that regulator in a vin-supply property of those new module level system regulators. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: vf-colibri: remove regulator container nodeStefan Agner1-26/+16
Drop the fake simple-bus container 'regulators' and put the regulators directly under the root node. This also makes the artificial 'reg' properties superfluous. While at it, remove the unnecessary regulator-always-on property and name the regulators according to schematics. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: vf-colibri: assign Ethernet clock explicitlyStefan Agner1-0/+7
Assign Ethernet clock parents explicitly. The Colibri VF61 uses the 50MHz Ethernet clock provided by PLL5. The Vybrid SoC has two ethernet interfaces (fec0 and fec1) which use the same clock source (VF610_CLK_ENET). Therefore this parent configuration affects multiple consumer devices and need to be specified in the clock provider node. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: vf610twr: assign Ethernet clock explicitlyStefan Agner1-0/+4
Assign Ethernet clock parents explicitly. The VF610 Tower Board uses the external Ethernet clock input which is connected to a 50MHz clock. The Vybrid SoC has two ethernet interfaces (fec0 and fec1) which use the same clock source (VF610_CLK_ENET). Therefore this parent configuration affects multiple consumer devices and need to be specified in the clock provider node. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx6q-tbs2910: remove artificial simple-bus for regulatorsSoeren Moch1-26/+17
Signed-off-by: Soeren Moch <smoch@web.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx6q-tbs2910: remove unnecessary iomuxc container nodesSoeren Moch1-134/+128
Remove the following unnecessary iomuxc container nodes: imx6q-tbs2910 gpio_fan gpio_leds Sort the pinctrl nodes alphabetically. Signed-off-by: Soeren Moch <smoch@web.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx6q-tbs2910: avoid sdhci boot warningsSoeren Moch1-0/+9
Avoid the following warnings (example for usdhc2): /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found Signed-off-by: Soeren Moch <smoch@web.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx6q-tbs2910: add SATA PHY configurationSoeren Moch1-0/+4
Configure SATA PHY transmit level, boost, attenuation and equalizer parameters for long wire connections. TBS2910 contains a standard SATA connector, so devices are typically connected with (longer) SATA cables. And explicitly configuring these parameters avoids complaints about "not specified" values in boot messages. Signed-off-by: Soeren Moch <smoch@web.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx6dlq-wandboard-revb1.dts: use unique model idHeinrich Schuchardt2-2/+2
Downstream packages like Debian flash-kernel use /proc/device-tree/model to determine which dtb file to install. Hence each dts in the Linux kernel should provide a unique model identifier. Commit 8536239e371f ("ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board.")' created new files imx6dl-wandboard-revb1.dts and imx6q-wandboard-revb1.dts but used the same model identifier as in imx6dl-wandboard.dts and imx6q-wandboard.dts. This patch provides unique model identifiers for revision B1 of the Wandboard Dual and Wandbaord Quad. The patch leaves imx6dl-wandboard.dts and imx6q-wandboard.dts unchanged because it is not foreseeable if the same dts will valid for future board revisions or not. Furthermore we should avoid unnecessary changes. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-29ARM: dts: imx6: Add support for Toradex Ixora carrier boardPetr Štetiar2-0/+273
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>