| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 9d497e2941c3 ("block: don't protect submit_bio_checks by
q_usage_counter") moved blk_mq_attempt_bio_merge and rq_qos_throttle
calls out of q_usage_counter protection. However, these functions require
q_usage_counter protection. The blk_mq_attempt_bio_merge call without
the protection resulted in blktests block/005 failure with KASAN null-
ptr-deref or use-after-free at bio merge. The rq_qos_throttle call
without the protection caused kernel hang at qos throttle.
To fix the failures, move the blk_mq_attempt_bio_merge and
rq_qos_throttle calls back to q_usage_counter protection.
Fixes: 9d497e2941c3 ("block: don't protect submit_bio_checks by q_usage_counter")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20220308080915.3473689-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When tracing the whole disk, 'dropped' and 'msg' will be created
under 'q->debugfs_dir' and 'bt->dir' is NULL, thus blk_trace_free()
won't remove those files. What's worse, the following UAF can be
triggered because of accessing stale 'dropped' and 'msg':
==================================================================
BUG: KASAN: use-after-free in blk_dropped_read+0x89/0x100
Read of size 4 at addr ffff88816912f3d8 by task blktrace/1188
CPU: 27 PID: 1188 Comm: blktrace Not tainted 5.17.0-rc4-next-20220217+ #469
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-4
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_address_description.constprop.0.cold+0xab/0x381
? blk_dropped_read+0x89/0x100
? blk_dropped_read+0x89/0x100
kasan_report.cold+0x83/0xdf
? blk_dropped_read+0x89/0x100
kasan_check_range+0x140/0x1b0
blk_dropped_read+0x89/0x100
? blk_create_buf_file_callback+0x20/0x20
? kmem_cache_free+0xa1/0x500
? do_sys_openat2+0x258/0x460
full_proxy_read+0x8f/0xc0
vfs_read+0xc6/0x260
ksys_read+0xb9/0x150
? vfs_write+0x3d0/0x3d0
? fpregs_assert_state_consistent+0x55/0x60
? exit_to_user_mode_prepare+0x39/0x1e0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fbc080d92fd
Code: ce 20 00 00 75 10 b8 00 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 1
RSP: 002b:00007fbb95ff9cb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 00007fbb95ff9dc0 RCX: 00007fbc080d92fd
RDX: 0000000000000100 RSI: 00007fbb95ff9cc0 RDI: 0000000000000045
RBP: 0000000000000045 R08: 0000000000406299 R09: 00000000fffffffd
R10: 000000000153afa0 R11: 0000000000000293 R12: 00007fbb780008c0
R13: 00007fbb78000938 R14: 0000000000608b30 R15: 00007fbb780029c8
</TASK>
Allocated by task 1050:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x81/0xa0
do_blk_trace_setup+0xcb/0x410
__blk_trace_setup+0xac/0x130
blk_trace_ioctl+0xe9/0x1c0
blkdev_ioctl+0xf1/0x390
__x64_sys_ioctl+0xa5/0xe0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 1050:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x103/0x180
kfree+0x9a/0x4c0
__blk_trace_remove+0x53/0x70
blk_trace_ioctl+0x199/0x1c0
blkdev_common_ioctl+0x5e9/0xb30
blkdev_ioctl+0x1a5/0x390
__x64_sys_ioctl+0xa5/0xe0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff88816912f380
which belongs to the cache kmalloc-96 of size 96
The buggy address is located 88 bytes inside of
96-byte region [ffff88816912f380, ffff88816912f3e0)
The buggy address belongs to the page:
page:000000009a1b4e7c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0f
flags: 0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff)
raw: 0017ffffc0000200 ffffea00044f1100 dead000000000002 ffff88810004c780
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88816912f280: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff88816912f300: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
>ffff88816912f380: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff88816912f400: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff88816912f480: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
==================================================================
Fixes: c0ea57608b69 ("blktrace: remove debugfs file dentries from struct blk_trace")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220228034354.4047385-1-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As per NVMe/TCP specification (revision 1.0a, section 3.6.2.3)
Maximum Host to Controller Data length (MAXH2CDATA): Specifies the
maximum number of PDU-Data bytes per H2CData PDU in bytes. This value
is a multiple of dwords and should be no less than 4,096.
Current code sets H2CData PDU data_length to r2t_length,
it does not check MAXH2CDATA value. Fix this by setting H2CData PDU
data_length to min(req->h2cdata_left, queue->maxh2cdata).
Also validate MAXH2CDATA value returned by target in ICResp PDU,
if it is not a multiple of dword or if it is less than 4096 return
-EINVAL from nvme_tcp_init_connection().
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit e7d65803e2bb ("nvme-multipath: revalidate paths during rescan")
introduced the NVME_NS_READY flag, which nvme_path_is_disabled() uses
to check if a path can be used or not. We also need to set this flag
for devices that fail the ZNS feature validation and which are available
through passthrough devices only to that they can be used in multipathing
setups.
Fixes: e7d65803e2bb ("nvme-multipath: revalidate paths during rescan")
Reported-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
When a fabrics controller claims to support an invalidate metadata
configuration we already warn and disable metadata support. No need to
also return an error during revalidation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
iocb_bio_iopoll() expects iocb->private to be cleared before
releasing the bio.
We already do this in blkdev_bio_end_io(), but we forgot in the
recently added blkdev_bio_end_io_async().
Fixes: 54a88eb838d3 ("block: add single bio async direct IO helper")
Cc: asml.silence@gmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220211090136.44471-1-sgarzare@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that we disable wbt by set WBT_STATE_OFF_DEFAULT in
wbt_disable_default() when switch elevator to bfq. And when
we remove scsi device, wbt will be enabled by wbt_enable_default.
If it become false positive between wbt_wait() and wbt_track()
when submit write request.
The following is the scenario that triggered the problem.
T1 T2 T3
elevator_switch_mq
bfq_init_queue
wbt_disable_default <= Set
rwb->enable_state (OFF)
Submit_bio
blk_mq_make_request
rq_qos_throttle
<= rwb->enable_state (OFF)
scsi_remove_device
sd_remove
del_gendisk
blk_unregister_queue
elv_unregister_queue
wbt_enable_default
<= Set rwb->enable_state (ON)
q_qos_track
<= rwb->enable_state (ON)
^^^^^^ this request will mark WBT_TRACKED without inflight add and will
lead to drop rqw->inflight to -1 in wbt_done() which will trigger IO hung.
Fix this by move wbt_enable_default() from elv_unregister to
bfq_exit_queue(). Only re-enable wbt when bfq exit.
Fixes: 76a8040817b4b ("blk-wbt: make sure throttle is enabled properly")
Remove oneline stale comment, and kill one oneshot local variable.
Signed-off-by: Ming Lei <ming.lei@rehdat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-block/20211214133103.551813-1-qiulaibin@huawei.com/
Signed-off-by: Laibin Qiu <qiulaibin@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Various block drivers call blk_set_queue_dying to mark a disk as dead due
to surprise removal events, but since commit 8e141f9eb803 that doesn't
work given that the GD_DEAD flag needs to be set to stop I/O.
Replace the driver calls to blk_set_queue_dying with a new (and properly
documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the
only remaining caller.
Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk")
Reported-by: Markus Blöchl <markus.bloechl@ipetronik.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220217075231.1140-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add __GFP_ZERO flag for alloc_page in function bio_copy_kern to initialize
the buffer of a bio.
Signed-off-by: Haimin Zhang <tcs.kernel@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220216084038.15635-1-tcs.kernel@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If backing file's filesystem has implemented ->fallocate(), we think the
loop device can support discard, then pass sb->s_blocksize as
discard_granularity. However, some underlying FS, such as overlayfs,
doesn't set sb->s_blocksize, and causes discard_granularity to be set as
zero, then the warning in __blkdev_issue_discard() is triggered.
Christoph suggested to pass kstatfs.f_bsize as discard granularity, and
this way is fine because kstatfs.f_bsize means 'Optimal transfer block
size', which still matches with definition of discard granularity.
So fix the issue by setting discard_granularity as kstatfs.f_bsize if it
is available, otherwise claims discard isn't supported.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Reported-by: Pei Zhang <pezhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220126035830.296465-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Zone append command needs special handling to update the bi_sector
field in the bio struct with the actual position of the data in the
device. It is stored in __sector field of the request struct.
Fixes: 5581a5ddfe8d ("block: add completion handler for fast path")
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220211093425.43262-2-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The kernel test robot is reporting that xfstest which does
umount ext2 on xfs
umount xfs
sequence started failing, for commit 322c4293ecc58110 ("loop: make
autoclear operation asynchronous") removed a guarantee that fput() of
backing file is processed before lo_release() from close() returns to
user mode.
And syzbot is reporting that deferring destroy_workqueue() from
__loop_clr_fd() to a WQ context did not help [1]. Revert that commit.
Link: https://syzkaller.appspot.com/bug?extid=831661966588c802aae9 [1]
Reported-by: kernel test robot <oliver.sang@intel.com>
Acked-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reported-by: syzbot <syzbot+831661966588c802aae9@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/20220211071554.3424-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
AER is not backed by a real request, hence we should not incorrectly
assume that when failing to send a nvme command, it is a normal request
but rather check if this is an aer and if so complete the aer (similar
to the normal completion path).
Cc: stable@vger.kernel.org
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add NVMe request completion trace in nvme_complete_batch_req() because
nvme:nvme_complete_req tracepoint is missing in case of request batched
completion.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update
integrity seed") added code to update the integrity seed value when
advancing a bio. However, it failed to take into account that the
integrity interval might be larger than the 512-byte block layer
sector size. This broke bio splitting on PI devices with 4KB logical
blocks.
The seed value should be advanced by bio_integrity_intervals() and not
the number of sectors.
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: stable@vger.kernel.org
Fixes: 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update integrity seed")
Tested-by: Dmitry Ivanov <dmitry.ivanov2@hpe.com>
Reported-by: Alexey Lyashkov <alexey.lyashkov@hpe.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220204034209.4193-1-martin.petersen@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Controller deletion/reset, immediately followed by or concurrent with
a reconnect, is hard failing the connect attempt resulting in a
complete loss of connectivity to the controller.
In the connect request, fabrics looks for an existing controller with
the same address components and aborts the connect if a controller
already exists and the duplicate connect option isn't set. The match
routine filters out controllers that are dead or dying, so they don't
interfere with the new connect request.
When NVME_CTRL_DELETING_NOIO was added, it missed updating the state
filters in the nvmf_ctlr_matches_baseopts() routine. Thus, when in this
new state, it's seen as a live controller and fails the connect request.
Correct by adding the DELETING_NIO state to the match checks.
Fixes: ecca390e8056 ("nvme: fix deadlock in disconnect during scan_work and/or ana_work")
Cc: <stable@vger.kernel.org> # v5.7+
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Leon reported NULL pointer deref with nowait support:
[ 15.123761] device-mapper: raid: Loading target version 1.15.1
[ 15.124185] device-mapper: raid: Ignoring chunk size parameter for RAID 1
[ 15.124192] device-mapper: raid: Choosing default region size of 4MiB
[ 15.129524] BUG: kernel NULL pointer dereference, address: 0000000000000060
[ 15.129530] #PF: supervisor write access in kernel mode
[ 15.129533] #PF: error_code(0x0002) - not-present page
[ 15.129535] PGD 0 P4D 0
[ 15.129538] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 15.129541] CPU: 5 PID: 494 Comm: ldmtool Not tainted 5.17.0-rc2-1-mainline #1 9fe89d43dfcb215d2731e6f8851740520778615e
[ 15.129546] Hardware name: Gigabyte Technology Co., Ltd. X570 AORUS ELITE/X570 AORUS ELITE, BIOS F36e 10/14/2021
[ 15.129549] RIP: 0010:blk_queue_flag_set+0x7/0x20
[ 15.129555] Code: 00 00 00 0f 1f 44 00 00 48 8b 35 e4 e0 04 02 48 8d 57 28 bf 40 01 \
00 00 e9 16 c1 be ff 66 0f 1f 44 00 00 0f 1f 44 00 00 89 ff <f0> 48 0f ab 7e 60 \
31 f6 89 f7 c3 66 66 2e 0f 1f 84 00 00 00 00 00
[ 15.129559] RSP: 0018:ffff966b81987a88 EFLAGS: 00010202
[ 15.129562] RAX: ffff8b11c363a0d0 RBX: ffff8b11e294b070 RCX: 0000000000000000
[ 15.129564] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000001d
[ 15.129566] RBP: ffff8b11e294b058 R08: 0000000000000000 R09: 0000000000000000
[ 15.129568] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b11e294b070
[ 15.129570] R13: 0000000000000000 R14: ffff8b11e294b000 R15: 0000000000000001
[ 15.129572] FS: 00007fa96e826780(0000) GS:ffff8b18deb40000(0000) knlGS:0000000000000000
[ 15.129575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 15.129577] CR2: 0000000000000060 CR3: 000000010b8ce000 CR4: 00000000003506e0
[ 15.129580] Call Trace:
[ 15.129582] <TASK>
[ 15.129584] md_run+0x67c/0xc70 [md_mod 1e470c1b6bcf1114198109f42682f5a2740e9531]
[ 15.129597] raid_ctr+0x134a/0x28ea [dm_raid 6a645dd7519e72834bd7e98c23497eeade14cd63]
[ 15.129604] ? dm_split_args+0x63/0x150 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e]
[ 15.129615] dm_table_add_target+0x188/0x380 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e]
[ 15.129625] table_load+0x13b/0x370 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e]
[ 15.129635] ? dev_suspend+0x2d0/0x2d0 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e]
[ 15.129644] ctl_ioctl+0x1bd/0x460 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e]
[ 15.129655] dm_ctl_ioctl+0xa/0x20 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e]
[ 15.129663] __x64_sys_ioctl+0x8e/0xd0
[ 15.129667] do_syscall_64+0x5c/0x90
[ 15.129672] ? syscall_exit_to_user_mode+0x23/0x50
[ 15.129675] ? do_syscall_64+0x69/0x90
[ 15.129677] ? do_syscall_64+0x69/0x90
[ 15.129679] ? syscall_exit_to_user_mode+0x23/0x50
[ 15.129682] ? do_syscall_64+0x69/0x90
[ 15.129684] ? do_syscall_64+0x69/0x90
[ 15.129686] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 15.129689] RIP: 0033:0x7fa96ecd559b
[ 15.129692] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c \
c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff \
ff 73 01 c3 48 8b 0d a5 a8 0c 00 f7 d8 64 89 01 48
[ 15.129696] RSP: 002b:00007ffcaf85c258 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
[ 15.129699] RAX: ffffffffffffffda RBX: 00007fa96f1b48f0 RCX: 00007fa96ecd559b
[ 15.129701] RDX: 00007fa97017e610 RSI: 00000000c138fd09 RDI: 0000000000000003
[ 15.129702] RBP: 00007fa96ebab583 R08: 00007fa97017c9e0 R09: 00007ffcaf85bf27
[ 15.129704] R10: 0000000000000001 R11: 0000000000000206 R12: 00007fa97017e610
[ 15.129706] R13: 00007fa97017e640 R14: 00007fa97017e6c0 R15: 00007fa97017e530
[ 15.129709] </TASK>
This is caused by missing mddev->queue check for setting QUEUE_FLAG_NOWAIT
Fix this by moving the QUEUE_FLAG_NOWAIT logic to under mddev->queue check.
Fixes: f51d46d0e7cb ("md: add support for REQ_NOWAIT")
Reported-by: Leon Möller <jkhsjdhjs@totally.rip>
Tested-by: Leon Möller <jkhsjdhjs@totally.rip>
Cc: Vishal Verma <vverma@digitalocean.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
Commit ceaa762527f4 ("block: move direct_IO into our own read_iter
handler") introduced several regressions for bdev DIO:
1. read spanning EOF always returns 0 instead of the number of bytes
read. This is because "count" is assigned early and isn't updated
when the iterator is truncated:
$ lsblk -o name,size /dev/vdb
NAME SIZE
vdb 1G
$ xfs_io -d -c 'pread -b 4M 1021M 4M' /dev/vdb
read 0/4194304 bytes at offset 1070596096
0.000000 bytes, 0 ops; 0.0007 sec (0.000000 bytes/sec and 0.0000 ops/sec)
instead of
$ xfs_io -d -c 'pread -b 4M 1021M 4M' /dev/vdb
read 3145728/4194304 bytes at offset 1070596096
3 MiB, 1 ops; 0.0007 sec (3.865 GiB/sec and 1319.2612 ops/sec)
2. truncated iterator isn't reexpanded
3. iterator isn't reverted on blkdev_direct_IO() error
4. zero size read no longer skips atime update
Fixes: ceaa762527f4 ("block: move direct_IO into our own read_iter handler")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220201100420.25875-1-idryomov@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While nvme_rdma_submit_async_event_work is checking the ctrl and queue
state before preparing the AER command and scheduling io_work, in order
to fully prevent a race where this check is not reliable the error
recovery work must flush async_event_work before continuing to destroy
the admin queue after setting the ctrl state to RESETTING such that
there is no race .submit_async_event and the error recovery handler
itself changing the ctrl state.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
While nvme_tcp_submit_async_event_work is checking the ctrl and queue
state before preparing the AER command and scheduling io_work, in order
to fully prevent a race where this check is not reliable the error
recovery work must flush async_event_work before continuing to destroy
the admin queue after setting the ctrl state to RESETTING such that
there is no race .submit_async_event and the error recovery handler
itself changing the ctrl state.
Tested-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl
readiness for AER submission. This may lead to a use-after-free
condition that was observed with nvme-tcp.
The race condition may happen in the following scenario:
1. driver executes its reset_ctrl_work
2. -> nvme_stop_ctrl - flushes ctrl async_event_work
3. ctrl sends AEN which is received by the host, which in turn
schedules AEN handling
4. teardown admin queue (which releases the queue socket)
5. AEN processed, submits another AER, calling the driver to submit
6. driver attempts to send the cmd
==> use-after-free
In order to fix that, add ctrl state check to validate the ctrl
is actually able to accept the AER submission.
This addresses the above race in controller resets because the driver
during teardown should:
1. change ctrl state to RESETTING
2. flush async_event_work (as well as other async work elements)
So after 1,2, any other AER command will find the
ctrl state to be RESETTING and bail out without submitting the AER.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Record the start_time for a bio but defer the starting block core's IO
accounting until after IO is submitted using bio_start_io_acct_time().
This approach avoids the need to mess around with any of the
individual IO stats in response to a bio_split() that follows bio
submission.
Reported-by: Bud Brown <bubrown@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Depends-on: e45c47d1f94e ("block: add bio_start_io_acct_time() to control start_time")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220128155841.39644-4-snitzer@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reverts a1e1cb72d9649 ("dm: fix redundant IO accounting for bios that
need splitting") because it was too narrow in scope (only addressed
redundant 'sectors[]' accounting and not ios, nsecs[], etc).
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220128155841.39644-3-snitzer@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio_start_io_acct_time() interface is like bio_start_io_acct() that
allows start_time to be passed in. This gives drivers the ability to
defer starting accounting until after IO is issued (but possibily not
entirely due to bio splitting).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220128155841.39644-2-snitzer@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 180dccb0dba4f ("blk-mq: fix tag_get wait task can't be
awakened") will recalculate wake_batch when incrementing or decrementing
active_queues to avoid wake_batch > hctx_max_depth. At the same time, in
order to not affect performance as much as possible, the minimum wakeup
batch is set to 4. But when the QD is small (such as QD=1), if inc or dec
active_queues increases wakeup batch, that can lead to a hang:
Fix this problem with the following strategies:
QD : >= 32 | < 32
---------------------------------
wakeup batch: 8~4 | 3~1
Fixes: 180dccb0dba4f ("blk-mq: fix tag_get wait task can't be awakened")
Link: https://lore.kernel.org/linux-block/78cafe94-a787-e006-8851-69906f0c2128@huawei.com/T/#t
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Laibin Qiu <qiulaibin@huawei.com>
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Link: https://lore.kernel.org/r/20220127100047.1763746-1-qiulaibin@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove unneeded variable and directly return 0.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The Intel P4500/P4600 SSDs do not report a subsystem NQN despite claiming
compliance to a standards version where reporting one is required.
Add the IGNORE_DEV_SUBNQN quirk to not fail the initialization of a
second such SSDs in a system.
Signed-off-by: Zheng Wu <wu.zheng@intel.com>
Signed-off-by: Ye Jinhe <jinhe.ye@intel.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If blk_mq_request_issue_directly() failed from
blk_insert_cloned_request(), the request will be accounted start.
Currently, blk_insert_cloned_request() is only called by dm, and such
request won't be accounted done by dm.
In normal path, io will be accounted start from blk_mq_bio_to_request(),
when the request is allocated, and such io will be accounted done from
__blk_mq_end_request_acct() whether it succeeded or failed. Thus add
blk_account_io_done() to fix the problem.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220126012132.3111551-1-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Fix this issue by adding kobject_put().
Callback function blk_ia_ranges_sysfs_release() in kobject_put()
can handle the pointer "iars" properly.
Fixes: a2247f19ee1c ("block: Add independent access ranges support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220120101025.22411-1-linmq006@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
|
|
To speed up the boot process, as mcount_loc needs to be sorted for ftrace
to work properly, sorting it at build time is more efficient than boot up
and can save milliseconds of time. Unfortunately, this change broke s390
as it will modify the mcount_loc location after the sorting takes place
and will put back the unsorted locations. Since the sorting is skipped at
boot up if it is believed that it was sorted at run time, ftrace can crash
as its algorithms are dependent on the list being sorted.
Add a new config BUILDTIME_MCOUNT_SORT that is set when
BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine
if sorting should take place at boot up.
Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/
Fixes: 72b3942a173c ("scripts: ftrace - move the sort-processing in ftrace_init")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Return value from perf_event__process_tracing_data() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220112080109.666800-1-chi.minghao@zte.com.cn
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a test which allows us to test parsing an event alias with hyphens.
Since these events typically do not exist on most host systems, add the
alias to the fake pmu.
Function perf_pmu__test_parse_init() has terms added to match known test
aliases.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a test for aliases with hyphens in the name to ensure that the
pmu-events tables are as expects. There should be no reason why these sort
of aliases would be treated differently, but no harm in checking.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Event aliasing for events whose name in the form foo-bar-baz is not
supported, while foo-bar, foo_bar_baz, and other combinations are, i.e.
two hyphens are not supported.
The HiSilicon D06 platform has events in such form:
$ ./perf list sdir-home-migrate
List of pre-defined events (to be used in -e):
uncore hha:
sdir-home-migrate
[Unit: hisi_sccl,hha]
$ sudo ./perf stat -e sdir-home-migrate
event syntax error: 'sdir-home-migrate'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event>event selector. use 'perf list' to list available events
To support, add an extra PMU event symbol type for "baz", and add a new
rule in the bison file.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A previous patch preventing "attr->sample_period" values from being
overridden in pfm events changed a related behaviour in arm-spe.
Before said patch:
perf record -c 10000 -e arm_spe_0// -- sleep 1
Would yield an SPE event with period=10000. After the patch, the period
in "-c 10000" was being ignored because the arm-spe code initializes
sample_period to a non-zero value.
This patch restores the previous behaviour for non-libpfm4 events.
Fixes: ae5dcc8abe31 (“perf record: Prevent override of attr->sample_period for libpfm4 events”)
Reported-by: Chase Conklin <chase.conklin@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Remove all but the first include of stdbool.h from cpumap.h.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220117083730.863200-1-lv.ruyi@zte.com.cn
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Switch from directly accessing the perf_cpu_map to using the appropriate
libperf API when possible. Using the API simplifies the job of
refactoring use of perf_cpu_map.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220122045811.3402706-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Value should be built as an integer.
Switch some uses of perf_cpu_map to use the library API.
Fixes: 6d18804b963b78dc ("perf cpumap: Give CPUs their own type")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220122045811.3402706-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Perf script was failed to print the phys_addr for SPE profiling.
One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR
attribute set, perf script then exits with error.
Now referring to 'addr', use evsel__do_check_stype() to check the type.
Before:
# perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\
store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3
# perf script -F pid,tid,addr,phys_addr
Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field.
After:
# perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\
store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3
# perf script -F pid,tid,addr,phys_addr
4064384/4064384 ffff802f921be0d0 2f921be0d0
4064384/4064384 ffff802f921be0d0 2f921be0d0
Reviewed-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Yao Jin <jinyao5@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.com
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since b8c96a6b466c ("certs: simplify $(srctree)/ handling and remove
config_filename macro"), when CONFIG_MODULE_SIG_KEY is empty,
signing_key.x509 fails to build:
CERT certs/signing_key.x509
Usage: extract-cert <source> <dest>
make[1]: *** [certs/Makefile:78: certs/signing_key.x509] Error 2
make: *** [Makefile:1831: certs] Error 2
Pass "" to the first argument of extract-cert to fix the build error.
Link: https://lore.kernel.org/linux-kbuild/20220120094606.2skuyb26yjlnu66q@lion.mk-sys.cz/T/#u
Fixes: b8c96a6b466c ("certs: simplify $(srctree)/ handling and remove config_filename macro")
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
|
|
When CONFIG_MODULE_SIG_KEY is PKCS#11 URL (pkcs11:*), signing_key.x509
fails to build:
certs/Makefile:77: *** target pattern contains no '%'. Stop.
Due to the typo, $(X509_DEP) contains a colon.
Fix it.
Fixes: b8c96a6b466c ("certs: simplify $(srctree)/ handling and remove config_filename macro")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This reverts commit cd8c917a56f20f48748dd43d9ae3caff51d5b987.
Commit 129ab0d2d9f3 ("kbuild: do not quote string values in
include/config/auto.conf") provided the final solution.
Now reverting the temporary workaround.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
As linux/nfc.h userspace compilation was finally fixed by commits
79b69a83705e ("nfc: uapi: use kernel size_t to fix user-space builds")
and 7175f02c4e5f ("uapi: fix linux/nfc.h userspace compilation errors"),
there is no need to keep the compile-test exception for it in
usr/include/Makefile.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Select FRONTSWAP from ZSWAP instead of prompting for it.
Link: https://lkml.kernel.org/r/20211224062246.1258487-14-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is only a single instance of frontswap ops in the kernel, so
simplify the frontswap code by removing support for multiple operations.
Link: https://lkml.kernel.org/r/20211224062246.1258487-13-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
swap_lock and swap_active_head are only used in swapfile.c, so mark them
static.
Link: https://lkml.kernel.org/r/20211224062246.1258487-12-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Given that frontswap_register_ops must be called from built-in code,
there is no need to handle the case of swapfiles coming online before or
during it, so delete the code that deals with that case.
Link: https://lkml.kernel.org/r/20211224062246.1258487-11-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
frontswap_test is unused now, remove it.
Link: https://lkml.kernel.org/r/20211224062246.1258487-10-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove the unused frontswap and pages_to_unuse arguments, and mark the
function static now that the caller in frontswap is gone.
[akpm@linux-foundation.org: fix shmem_unuse() stub, per Matthew]
Link: https://lkml.kernel.org/r/20211224062246.1258487-9-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
Shin'ichiro Kawasaki
Yu Kuai
Varun Prakash
Christoph Hellwig
Stefano Garzarella
Laibin Qiu
Haimin Zhang
Ming Lei
Pankaj Raghav
Tetsuo Handa
Sagi Grimberg
Bean Huo
Martin K. Petersen
Uday Shankar
Song Liu
Ilya Dryomov
Mike Snitzer
Changcheng Deng
Wu Zheng
Miaoqian Lin
Linus Torvalds
Steven Rostedt (Google)
Minghao Chi
John Garry
German Gomez
Lv Ruyi
Ian Rogers
Yao Jin
Masahiro Yamada
Dmitry V. Levin